51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Dimmable Recessed LED Puck Light
This puck light features three one watt LED units. It is
perfect to illuminate cabinets, niches and any other
display area requiring excellent light with no heat. It
is available as a dimming or non dimming unit. The
dimming version is controlled with a wall dimmer on
the 120 volt side of the power supply.
The gimbal action allows for flexibility in how the
light can be directed. Just cut the hole, hold down
the spring tabs on the side of the unit, then slide the
puck in. The spring tabs push out- holding the puck
into place.
One remote power supply is required.
Recessed LED Puck Specifications
• 3200K Color Temperature
• 3 x 1 Watt LEDs
• 240 Lumen Output
• 3.152” Wide x 1.26” Deep - 2.75” Cutout
• 30 Degree Beam Spread
Each dimming puck requires a small, dimming module
which will sit next to (or behind) the puck when
installed. It measures 0.75" diameter x 0.50" tall.
Each of these modules will connect to the master
power supply.
Ordering Information
Non Dimmable Driver Specifications
LEDPUCK Type
• 15 Watts
• 5.25” Long x 1.75” Wide x 1” High
• Hardwired
DIM
NON-DIM
Driver Information
LEDDRIVERHW-15 Watt non Dimming Driver
LEDDRIVERDIM-40 Watt dimming driver
Dimming Power Supply Specifications
5-11
• 40 Watts
• 5.03” Long x 2.14” Wide x 2” High
• Secondary Breaker
• ETL Listed
• Dim with magnetic low voltage dimmer
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Dimmable Surface Mount LED Puck Light
This puck light features three one watt LED units. Its
wide beam spread generates a wonderful effect for
illuminatint cabinets, counter tops or niches. It is
available as a dimming or non dimming unit.
One remote power supply is required.
Each dimming puck requires a small, dimming module
which will sit behind the puck when installed. It
measures 0.75" diameter x 0.50" tall. Each of these
modules will connect to the master power supply.
Surface LED Puck Specifications
• 2.75” diameter x 0.50” Deep
• 3200K Color Temperature
• 3 x 1 Watt LEDs
• 145 Lumen Output
• 120 Degree Beam Spread
Ordering Information
LEDSurfacepuck Type
Non Dimmable Driver Specifications
• 5.25” Long x 1.75” Wide x 1” High
• 15 Watts
• Hardwired
DIM
NON-DIM
Driver Information
LEDDRIVERHW-15 Watt non dimming driver
LEDDRIVERDIM-40 Watt dimming driver
Dimming Power Supply Specifications
5-11
• 5.03” Long x 2.14” Wide x 2” High
• 40 Watts
• Secondary Breaker
• ETL Listed
• Dim with magnetic low voltage dimmer
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Greenflex+ LED Under Cabinet Strip
With On Board Voltage Regulation
:-4(;
MODA LIGHT Q
-#+.*/0
?GcDN
)*+%,
;<=*0&*
FDD(!"#S
W%9SY752
G%^1A"%+
!132('#(;
dHTCS'(`C+
The next generation of our Greenflex LED tape light
increases lumen output along with providing on board
voltage protection.
'(@C#36
E3-F.3*G@
(
(
Most dimming drivers will fluctuate the voltage output
based on input voltage. Therefore if the voltage output
is higher than what the strip is rated for, the individual
LEDs may be damaged.
To mitigate this, the Greenflex+ has on board voltage
protection which will not allow more than 24 volts to be
delivered to the LEDs. This protects not only the lifespan
of the LEDs, but the color as well- as overheating LEDs
will cause color shift over time.
Available with non dimming or dimming drivers. Use a
magnetic low voltage dimmer with the dimming driver.
The strip comes with two sided tape on the back, is
cuttable every four inches and can be physically pulled
apart every foot (without the need of scissors).
G@H6#D*dI
•
•
•
•
•
•
•
•
•
2700K Color Temperature Standard
3100K & 4100K Available
1.5W Watts Per Foot
H++
i%AZ2',(FTI++Per Foot
115 Lumens
0.31” Wide x 0.094” High
120 Degree
Beam
Spread
'+ Co.,Ltd
++
L+
<
M
J
K
Quasar
Light
Indoor
Rated JI HCTC )k7 cM7
56:.@C*2.3*4((#
cM7
cM7
)k7
Power Supply
Dimmable
56:.@C*2.3*+9##
NU
NFTH )k7
cM7
cM7
cM7
)k7
#$$%&''((()*+,-,./01)234
Title 24 compliant
'()(3*=.:H*NOP
CCDD
Part No.
FDDD
)k7
dHDD( dHDD(
)k7
IDDD IDDD
HIJ/+
CIF/+
4#
567
!"#
PI
&"#
%"#
$"#
NHC/+
Description
A#(39B.*
J.9:*K@
E-:.@C-
+.-B,#D*
G2!0
KHH3(F9
KHH)-89#
CPD/+
EXW
!100pcs
NDD(
PDD(
FDD(
NDD(
Waterproof
Supply JDD
UDD
ddDDPowerCDD
'(()*+,-#.*/!01*2.3*4((#
Driver dimensions may vary based on availability from the
manufacturer, so please confirm sizing if there is not much
room in the installation.
IH.39#-@
CDDD++
56:-@(6C*
G@#.@C-#Q*N:8RP
Maximum individual run is 30’. Beyond this, wire a home
run to the driver for additional lengths.
Other wattages are available for both the dimming and
non dimming drivers, please ask if interested.
+9##D*IC
Greenflex+ Under Cabinet Strip
XA+%/3A#/3
+93:*+,-#.*/!01*2.3*4((#
4#
567
UTC
!"#
PU
IF
ITd
&"#
IJ
ITC
dD
DTPI
%"#
dI
dTdd
DTNH
$"#
J
C
"8
"8
PTd
DTHC
12V-30W-120V
30W, Input 120V, Output 12V 2.5A, 203mmX27mmX26mm
US$10.00
12V-30W-240V
30W, Input 240V, Output 12V 2.5A, 203mmX27mmX26mm
30 Watt Non Dimming Power Supply
US$9
US$10.00
US$9
12V-60W-120V
?GcDN
60W,
Input 120V, Output 12V 5A, 180mmX68mmX53mm
US$14.00
US$1
12V-60W-240V
-#9#"
60W, Input 240V, Output 12V 5A, 180mmX68mmX53mm
US$14.00
US$1
12V-100W-120V
-B
-##9(B2A'%(CCDDE
100W, Input 120V, Output 12V 8.5A, 180mmX68mmX53mm
US$25.00
US$2
12V-100W-240V
100W, Input 120V, Output 12V 8.5A, 180mmX68mmX53mm
US$25.00
US$2
12V-150W-120V
150W, Input 120V, Output 12V 12.5A, 180mmX68mmX53mm
US$30.00
US$2
12V-150W-240V
M91%(NHC/+K
150W, Input 120V, Output 12VM
12.5A, 180mmX68mmX53mm
US$30.00
US$2
• 10” Long x 1.25” Wide x 1.25
@1*/'A'0
-#5%
listed ?#5%9
• Dry Location
HighYM
BB
G
L
7
B*"+(B2A'%(FDDDE
G%5(HIJ/+K
L"%%/(CIF/+K
7+O%"(CPD/+K
24V-30W-120V
30W, Input 120V, Output 24V 1.2A, 203mmX27mmX26mm
US$10.00
US$9
24V-30W-240V
W.%&A*9(e/3'"1&'A#/3,
30W, Input 240V, Output 24V 1.2A, 203mmX27mmX26mm
US$10.00
US$9
24V-60W-120V
60W, Input 120V, Output 24V 2.5A, 180mmX68mmX53mm
US$14.00
US$1
24V-60W-240V
60W, Input 240V, Output 24V 2.5A, 180mmX68mmX53mm
US$14.00
US$1
24V-100W-120V
100W, Input 90V~130V, Output 24V 4.2A, 180mmX68mmX53mm
US$25.00
US$2
24V-100W-240V
100W, Input 170V~250V, Output 24V 4.2A, 180mmX68mmX53mm
! ! ! " # $ % & ' ( ) * + " , $ # - ./ 0 1 2 - 0 3 0 - 4 4 4 5 - 6 / 0 1 2 - 0 3 0 - 0 3 7 8 - 9 0 7 7 2 - : ; < = - > ? @ A .
Dimming Power Supply Specifications
•
•
•
•
•
•
101-
US$25.00
US$2
24V-150W-120V
150W, Input 90V~130V, Output 24V 6A, 180mmX68mmX53mm
US$30.00
US$2
24V-150W-240V
150W, Input 170V~250V, Output 24V 6A, 180mmX68mmX53mm
US$30.00
US$2
40 Watts
5.03” Long x 2.14” Wide x 2” High
Secondary Breaker
sales@quasarled.com
1 OF 2
ETL Listed
Dim with magnetic low voltage dimmer
Dry Location listed
http://www
8-13
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
liteline@mac.com
www.halogenlighting.com
Superflex LED Under Cabinet Strip
Our Superflex flexible LED strip uses high brightness
surface mounted LEDs to produce a very pleasing 162
lumens per foot and can be cut every 2”.
Reel length is 16 feet but it is sold on a per foot basis. IP20
rated for interior use.
Available as non dimming or dimming. Use a magnetic low
voltage dimmer with the dimming driver.
Superflex Under Cabinet Strip
•
•
•
•
•
•
•
•
3000K Color Temperature Standard
2.88W Watts Per Foot
210 Lumens Per Foot
0.35” Wide x 0.126” High
120 Degree Beam Spread
Indoor location
Quasar Lightonly
Co.,Ltd
Dimmable
Power Supply
Title 24 compliant
#$$%&''((()*+,-,./01)234
Part No.
Description
EXW
!100pcs
101-
Waterproof Power Supply
Ordering Information
Superflex Length
Driver
Superflexdriver-HW Superflexdriver-DIM
Non Dimming
Dimming
Jumper Wires/ Inline Connector
Superflexjumper Superflexpowerfeed
Jumper wire
Power Feed
SuperflexYconnector Y Connector
12V-30W-120V
30W, Input 120V, Output 12V 2.5A, 203mmX27mmX26mm
US$10.00
US$9
12V-30W-240V
30W, Input 240V, Output 12V 2.5A, 203mmX27mmX26mm
US$10.00
US$9
30 Watt Non Dimming Power Supply
• 10” Long x 1.25” Wide x 1.25 High
• Dry Location listed
12V-60W-120V
60W, Input 120V, Output 12V 5A, 180mmX68mmX53mm
US$14.00
US$1
12V-60W-240V
60W, Input 240V, Output 12V 5A, 180mmX68mmX53mm
US$14.00
US$1
12V-100W-120V
100W, Input 120V, Output 12V 8.5A, 180mmX68mmX53mm
US$25.00
US$2
12V-100W-240V
100W, Input 120V, Output 12V 8.5A, 180mmX68mmX53mm
US$25.00
US$2
12V-150W-120V
150W, Input 120V, Output 12V 12.5A, 180mmX68mmX53mm
US$30.00
US$2
12V-150W-240V
150W, Input 120V, Output 12V 12.5A, 180mmX68mmX53mm
US$30.00
US$2
24V-30W-120V
30W, Input 120V, Output 24V 1.2A, 203mmX27mmX26mm
US$10.00
US$9
24V-30W-240V
30W, Input 240V, Output 24V 1.2A, 203mmX27mmX26mm
US$10.00
US$9
24V-60W-120V
60W, Input 120V, Output 24V 2.5A, 180mmX68mmX53mm
US$14.00
US$1
24V-60W-240V
60W, Input 240V, Output 24V 2.5A, 180mmX68mmX53mm
US$14.00
US$1
24V-100W-120V
100W, Input 90V~130V, Output 24V 4.2A, 180mmX68mmX53mm
US$25.00
US$2
US$25.00
US$2
Dimming Power Supply Specifications
24V-100W-240V
SuperflexTconnector
T Connector
Superflexjumper
Jumper for corners (6” & 12”)
100W, Input 170V~250V, Output 24V 4.2A, 180mmX68mmX53mm
• 60 Watts
• 4.75” Long x 3” Wide x 3.5” High (7” long
with mounting
tabs).
sales@quasarled.com
1 OF 2
• ETL Listed
• Dim with magnetic low voltage dimmer
• Dry Location listed
24V-150W-120V
150W, Input 90V~130V, Output 24V 6A, 180mmX68mmX53mm
US$30.00
US$2
24V-150W-240V
150W, Input 170V~250V, Output 24V 6A, 180mmX68mmX53mm
US$30.00
US$2
http://www
2-12
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Mia LED Under Cabinet Strip
The Mia LED is a thin T5 form matte chrome aluminum tube
with clustered, highly efficient Nichia LEDs. The Mia has a
120° beam angle spread and provides a standard of 365+
lumens per foot from only 4.5 watts- an amazing 108
lumens per watt and 87+ CRI.
This is an attractive LED rigid tube that can be installed in or
out of direct view. Examples of applications include, jewelry
cases, cove lighting, under cabinet, retail display and
refrigeration.
Other available options are a maximum light output of 516
lumens per foot at 5.5 watts and a 92 CRI version at 440+
lumens per foot.
Mia LED Under Cabinet Strip
What sets the Mia apart from other LED linear lights is each
section is built per job, allowing the individual LEDs to be
• 0.5” Diameter
binned down a a minuscule +/- 60 K. This guarantees that
• Multiple color temperatures available
there will be no color shift down the length of the strip, or
• 98+ Lumens Per Watt
between strips, providing for perfectly even lighting color for
• 4.5 Watts per foot
the whole installation.
• Dry location listed
SPECIFICATION
SHEET
• Dimmable
All LEDs are binned and mounted in the United States.
• Tiltable to direct light direction
• 87+ CRI (92+ CRI Available)
24VDC •MAGNETIC
DIMMABLE LED POWER SUPPL
The Mia is available in 4” increments up to 96”. The rounded
Title 24 compliant
mounting clips give the Mia the ability to be rotated to direct
the light where it’s needed the most, or to avoid glare off of
polished surfaces.
Power wires on one end is standard and a frosted front lens
is available.
Color temperatures available are: 2400K, 2700K, 3000K,
3500K, 4000K and 4500K.
FEATURES
Drivers
• 3 YEAR FREE REPLACEMENT WARRANTY
Finishes available are: Silver, Black, Bronze, White or
• FULLY DIMMABLE, WITH LOW-VOLTAGE
Custom.
Dimming MAGNETIC DIMMER
• 1/8” STEEL, POWDER COATED NEMA 3R CASE
For brighter light, we have versions available up to 774
• 48 Watt- 11.5” L x 3” W x 3.5” H
Watt11.5” L xSECONDARY
3” W x 3.5”
H
•
STANDARD
WITH
MANDATORY
PROTECTION
• 96
lumens per foot.
Dry
Location
listed
•
• MEET CLASS
2 OUTPUT
circuitLIMITS
& overload protection
• Short
Dim
with
magnetic
low voltage dimmer
•
• 24 VOLT “DC”
RATED OUTPUT
• MEETS OR EXCEEDS ALL UL,
CUL,
ANSI/UL, CSA REQUIREMENTS.
Non
Dimming
REQUIREMENTS
• 10 Watt- 3.35” L x 1.6” W x 0.84” H
• 30 Watt- 5.90” L x 1.6” W x 1.2” H
• 60 Watt- 5.25” L x 1.5” W x 1.2” H
• MEETS THE REQUIREMENTS FOR UL STANDARDS 2108 AND 1838
8-13
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
Max. Rated
Fixture
Color
LED’s
www.litelineinc.com
FENCER Under Cabinet LED Light Fixture Series
™
TECHNICAL SPECIFICATIONS
Size
Wattage
Color
120 Volt Tilt LED Cabinet Fixture
™
ER Under Cabinet LED Light Fixture Series
SABER
White
7
SABER
Bronze
7
White
10
Bronze
10
White
15
7
Bronze
15
7
White
20
10
Bronze
20
10
White
27
SABER
CAL SPECIFICATIONS
As the the Tilt LED system does not require a remote
SABER
driver, itSize
allows for easy retrofitting
existing
line
voltage
Max.of
Rated
Fixture
Color
SABER
Wattage
Color
under cabinet lights. For new construction
applications,
SABER
simply run standard
location
SABER line voltage wiring to the
White
SABER the
desired. A surface
connect
SABERmounted box is used toBronze
wiring from theSABER
wall to a jumper wire to feedWhite
theSABER
strip.
BronzeSABER
SABER
And true to its name, the mounting brackets allow
you to
SABER
WhiteSABER
tilt the whole unit to fine tune the direction of the light.
SABER
Bronze
SABERmagnetic low voltage wall
White
It is dimmable with
dimmers,
SABER
Bronze
has a 50,000 hour rated life and a 3 year warranty.
SABER
White
Available in white
or silver finishes and fourBronze
lengths:
SABER
8.77” x 1.1” x 0.94”
175 lumens at 2.8 watts
24.17” x 1.1” x 0.94”
500 lumens at 8 watts
Bronze
15 Tilt Under
LED
Cabinet Strip
•
•
•
•
•
•
27
15 Color White
3000K
Temperature
Silver
62.5 Lumens
Per Watt
20
4 Watts
per
foot
White
20
Dry location
listed
Silver
27
Dimmable
White
Title 27
24 compliant
7
7
10
10
20
7
Silver
20
Silver
7
White
27
White
10
Silver
27
Silver
10
White
20
White
12.32” x 1.1” x 0.94”
250 lumens at 4 watts
LED’s
: 120V AC
Silver
: With
: Indoor only White
: 77º F (25ºC)
Silver
: Up to 40 Fixtures connected linearly with
end-to-end or with connector cables.
For dimming applications, please refer to
20
27
27
the Junction Box c
hub as well as off
On/Off switch for
32.71” 1.1” x 0.94”
675
lumens
at 10.8 watts
: 120V
AC
: 50,000 hours
:
Direct
line with
end to end or around corners
withFENCER™
the 6” ConnectorsJunction Box with On/ Off Switch
: 3 years
: 77º F (25ºC)
extension cable.
the Junction Box can act as a direct line
: Up to 40 Fixtures connected linearly with
Long x 3.62” Wide x 0.96” High
• 6.25”
hub as well as offering an independent
-to-end or with connector cables.
On/Off
switch for your installation.
For dimming applications, please refer to
: SSC 5630
: With
: Indoor
only
Can
mount
: 50,000 hours
: Direct line with FENCER™ Connectors
: 3 years
: SSC 5630
: 550 lm
: 550 lm x 1 meter
: 0.9540%
: 550 lm
: 550 lm x 1 meter
: 0.9540%
Seamlessly connects two sections of
any length together.
: 1.5 in.
Color
: 1.5 in.
DI-1305-WH Junction Box w/ On/Off Switch
Perfect for jumping around gaps and
DI-1305-SV
6” Extension
Junction Cable
Box w/ On/Off Switch
Seamlessly connects two sections of
obstructions in the installation or for
DI-1306-WH angles
any length together.
negotiating
of
any
degree. Connector
Linkable
end-to-end
Use for corner applications
White
DI-1306-BK
Linkable end-to-end Connector
Black
DI-1307-WH
6” Extension Cable
White
DI-1307-BK
6” Extension Cable
6.25” x 3.62” x 0.96”
Black
RoHS
Compliant
•
Color
RoHS
Perfect for jump
obstructions in
negotiating angl
DI-1305-WH
Junction Box w/ On/Off Switch
DI-1305-SV
Junction Box w/ On/Off Switch
Silver
6.25” x 3.62” x 0.96”
Copyright © 2013 Diode LED. All Rights Reserved.
Linkable end-to-end Connector
White
0.8” x 0.67” x 0.44”
DI-1306-WH
White
Silver
White
3-13
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
120 Volt LED Core Under Cabinet Light
This unit is for applications in which it is too late or not
possible to add a remote transformer.
It can be controlled with a wall switch or dimmer
(electronic low voltage) or even a local switch, if
needed.
Two color temperatures (3000K and 4000K) and three
lengths (11”, 21”, 41”) are available.
No driver or transformer required.
The slightly frosted lens in frost helps blend the LEDs
to provide excellent coverage.
Various jumper wires available for different
installation needs.
UL Listed, Title 24 compliant and Energy Star
qualified.
Ordering Information
LEDCore -
+
Length
Color Temperature
9”
21”
41”
3000k (warm)
4000k (cool)
Jumper Wires/ Inline Connector
LEDCore-Jumper
6”/ 12”/ 18”
LEDCore-Power Power Feed Box
1.125” x 1.75” x 3.5”
One power feed box required at the start of every
run. It will be mounted next to the wall and have a
jumper wire connect it to your light strip.
11” 120 Volt LED Under Cabinet Strip
•
•
•
•
•
•
•
11” x 1.7” x 0.88” Including Connectors
Color Temperatures: 3000k, 4000k
256 Lumens @ 42.2 Lumens Per Watt
5.5 Watts
Dry location listed
Dimmable
79 CRI @ 3000K/ 84 CRI @ 4000K
21” 120 Volt LED Under Cabinet Strip
•
•
•
•
•
•
•
21” x 1.7” x 0.88” Including Connectors
Color Temperatures: 3000k, 4000k
466 Lumens @ 46.7 Lumens Per Watt
10 Watts
Dry location listed
Dimmable
79 CRI @ 3000K/ 84 CRI @ 4000K
41” 120 Volt LED Under Cabinet Strip
•
•
•
•
•
•
•
41” x 1.7” x 0.88” Including Connectors
Color Temperatures: 3000k, 4000k
1042 Lumens @ 50.1 Lumens Per Watt
20 Watts
Dry location listed
Dimmable
79 CRI @ 3000K/ 84 CRI @ 4000K
4-12
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
XL3- Low Profile 3” LED Down Light
This 3” LED unit uses only 12 watts of power and
provides 900 lumens for excellent task and general
lighting applications.
And with only a 3.5” depth, it is perfect for shallow
space applications. Mimicking the look of an MR16
bulb, the LED array is recessed into the unit with a
reflector cone in front. This design not only helps
blocks the light source from view, but also provides a
very crisp 38º beam spread for excellent task lighting
or general room light.
Multiple color temperatures available: 2700K (900
lumens), 3000K (900 lumens), 4000K (1000 lumens)
and 5000K (1150 lumens). All color temperatures
(except 5000K) have an 80+ CRI. 5000K is at a CRI of
72.
The housing is IC Airtight rated and constructed of fire
rated plastic. Adjustable butterfly clips (for ceiling
thicknesses of 0.25” to 1.25”) hold the housing into
place.
Use either as a remodel housing or with an optional
new construction mounting plate.
XL3 LED Down Light
• 2700K/ 3000k/ 4000k/ 5000k
• 12 Watts
• 900+ Lumen Output
• 3.375” Outside Diameter x 3.5” Depth
• White or Nickel Trim
• CRI: 80+
• Damp Location Listed
• Title 24 Compliant
• 38º Beam Spread
• Replaceable LED Module
• Surge, Overload & Short Circuit
Protection
• Hole Cutout of 2.75”
Damp location listed and dimmable with an ELV
dimmer.
tor
ble
m
),
Powder Coated. Module secured with Twist & Lock mechanism.
7-13
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
(PHOTOMETRIC REPORTS - TBA)
4” RECESSED TRIMS
LED4200-CP (wet location)
Copper Reflector
ist & Lo
ck
LED4230-W (wet location)
White Ribbed
Baffle Cone 4” LED unit
output
Tw
DL4-HO 4”
LED Down LightPatented click, twist, and
LED4100-CP
LED4130-W
This high
uses just 12 watts of
power but provides 750 lumens for excellent task and
general lighting
applications
LED4130-B
LED4100-BZ
LED4230-B (wet location)
LED4200-BZ (wet location)
LED4100-W
LED4101-S
lock feature:
1.
The die cast
heat sink acts as excellent
Blackaluminum
Ribbed
Bronze Reflector
Baffle
Cone
thermal management to pull the heat away from the
LEDs
2.
It can be dimmed
down
Rated
LED4200-W (wet
location)to 5%, is Energy Star
LED4201-S
(wet location)
with UL certifications
and Title 24 compliant.
White Reflector
Silver Reflector
DL4 LED Module
T
wist
Available
• 2700K/ 3000k/ 3500k
& L o c4000k
k
• 12 Watts
Available with square or round trims, along with two
750 Lumen Output
REPORTS• CRI:
- TBA)
t1MFBTFDPOUBDUGBDUPSZGPSDVTUPNGJOJTIFT
baffle styles- stepped and smooth. (PHOTOMETRIC
Finishes options
85
•
are white, black, copper, bronze and silver.
• 5 Year Warranty
• Damp Location Listed
4” RECESSED TRIMS
Wet location listed is available.
3.
Ordering Information
-
DL4HO Color
Temperature
Mounting
Type
Finish
Trim (Example: LED4130-W)
Trim
Choose from above
2700k
3000k
3500k
4000k
New Construction
Remodel
LED4130-W
LED4100-CP
LED4230-W (wet location)
White Ribbed
Baffle Cone
LED4200-CP (wet location)
Copper Reflector
LED4230-B (wet location)
Black Ribbed
Baffle Cone
LED4200-BZ (wet location)
Bronze Reflector
• Round or Square Trim
• Multiple Finishes Available
LED4130-B
• Stepped or Smooth Baffle LED4100-BZ
White
Black
Copper
Bronze
Silver6” Line Voltage
LED4100-W
Construction
Stepped orNew
Smooth
LED4200-W (wet location)
Double Wall IC Airtight Housing
White Reflector
DH100ICAT
Type
Catalog #
Project
LED4101-S
LED4201-S (wet location)
Silver Reflector
Date
Comments
www.dmf lighting.com
t1MFBTFDPOUBDUGBDUPSZGPSDVTUPNGJOJTIFT
1.800.441.4422
DESIGNED & ASSEMBLED IN THE4”
USA IC
ODUCT SPECIFICATION DATA
CRIPTION
ne voltage 120V New Construction Double Wall IC Airtight Housing rated for 100W. Can be in direct contact with
ation.
TURES
/ cUL listed for damp location, feed-through wiring, and direct contact with insulation
ermally protected against misuse of insulation materials and improper lamping
aled housing to prevent airflow from air conditioned or heated areas into ceiling
using adjusts to accomodate various ceiling thickness
ustable socket mounting plate for proper positioning of different lamp types
Airtight
Housing
Specifiations subject
to change withoutwith
notice. Title
Issued:24
24.AUG.11
Socket
• 6” Tall x 8.75” Long x 6.25” Wide
• 4.375” Ceiling Cutout
• Remodel: 5.625” Tall x 14.25” Long x
4.75” Wide
1-12
ated
LED
Light Fixture DATA
.
ELECTRICAL
PRODUCT PHOTOS
 Operating Temp: -40C toType
+75C
MODEL NO.: VARIOUS
EELECTRICAL
D
ATA
LECTRICAL
D
ATA
 Ambient Temp:
<35C
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Operating
Voltage:
 Operating
OperatingTemp:
Temp: -40C
-40C to +75C
Date
o LP3
103
50 / 60 Hz
Ambient
Temp:
<35C– 125VAC,
 Ambient
Temp:
<35C
o HN3Voltage:
208 – 285VAC, 50 / 60 Hz
Operating
Voltage:
 Operating
Shallow Depth
LED Recessed
Light
 Nominal
Voltage:
120/240/277V
(specify)
o
LP3
103
–
125VAC,
50
/
60
Hz
o LP3
103
/ 60 Hz
 Rated
Wattage:
up
20
watts
(see
fixture photometrics)
Width
HN3
208to–5”
50 // individual
60
oo HN3
208
285VAC,
60 Hz
Hz
NominalVoltage:
Voltage: 120/240/277V
120/240/277V (specify)
 Nominal
(specify)
RatedWattage:
Wattage:
up to
to 20
20 watts
watts (see
 Rated
up
(see individual
individualfixture
fixturephotometrics)
photometrics)
Optic
Options
,
,
s
ds
OpticOptions
Options
Optic
d
F205C01xxxyyF45zz
(5" Round Dish, F45)
F20
F20
F20
140º Beam Spread
s
0s
AL DATA
Temp:
0Temp:
F30
-40C to +75C
<35C
Voltage:
F30
F30
3
103 – 125VAC, 50 / 60 Hz
3
208 – 285VAC, 50 / 60 Hz
Use this
fixtureF405C01xxxyyF45zz
for any application
Voltage:
120/240/277V
(specify) where recessed
lights are not an
option
orChamfer,
desired. F45)
It will mount into
(5"watts
Square
ttage:most standard
up to 20
(see
individual
fixture photometrics)
junction boxes and is dimmable with
ons
ver
3
ver
120º Beam Spread
most dimmers. Available as a square or circle with
a flat or beveled face.
F45
• Designed, Engineered and Manufactured in USA
• Mounts to most junction boxes.
• 100,000 hour life - Active thermal feedback
monitors both LED & driver to protect against
overheating and allowing for extra long life.
• Serial number control – assures a replacement
light can be matched to existing installed lights.
• Up to 950+ lumen output.
• 100% Aluminum with 40% recycled content.
• 2700K, 3000K, 3500K, 4000K, 5000K
• UL1598 Surface Mount Listed
• Wet Location (under ceiling cover) listed
• 5 Year limited warranty for both LED and driver.
F20
F30
F45
F45
Sample Number: F205C01LP335F3010w
Color
Optics
Wattage Levels
Sample Number: F205C01LP335F3010w
90º Beam Spread
35Sample Number:
F30 F205C01LP335F3010w
10w
Color
Optics
Wattage Levels
4-13
Catalog #
Project
Comments
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
QL5- 5” LED Down Light
This 5” LED unit uses only 11.5 watts of power and
provides 600 lumens for excellent task and general
lighting applications. Using high quality CREE chips,
this fixture produces extremely crisp light with a
design which blends the face of the light to the
ceiling- giving it an unobtrusive look while on or off.
The shallow depth of the shade helps in allowing
more light to exit to your space, plus it doesn’t give
the impression of a big hole in the ceiling.
In addition, special care was made with the layout of
the LEDs along with the shade so that multiple
shadows are totally eliminated with this fixture. Most
LED fixtures, when an object is in front of them, will
produce overlapping shadows on the illuminated
surface. This may cause eye irritation and
distractions when looking and illuminated objects and
surfaces.
It is dimmable to 5%, Energy Star Rated, UL certified
and Title 24 compliant.
QL5 LED Down Light
• 2700K/ 3000k Color Temperature
• 11.5 Watts
• 600 Lumen Output
• 6.5” Outside Diameter x 5” Depth
• Paintable Trim
• CRI: 80+
• 3 Year Warranty
• Damp Location Listed
• GU24 Base
• 80º Beam Spread
DH100ICAT
6” Line Voltage
Ordering Information New Construction
Type
QL5
-
-
Date
Color
Temperature
ODUCT SPECIFICATION DATA
2700k
Double Wall IC Airtight Housing
Mounting
Type
New Construction
CRIPTION
3000k
Remodel
ne voltage 120V New Construction Double Wall IC Airtight Housing rated for 100W. Can be in direct contact with
ation.
TURES
/ cUL listed for damp location, feed-through wiring, and direct contact with insulation
ermally protected against misuse of insulation materials and improper lamping
aled housing to prevent airflow from air conditioned or heated areas into ceiling
using adjusts to accomodate various ceiling thickness
ustable socket mounting plate for proper positioning of different lamp types
n be dimmed using standard incandescent dimmer
5” IC Airtight Housing with Title 24
Socket
• 7.50” Tall x 10.125” Long x 7” Wide
• 5.625” Ceiling Cutout
• Remodel: 7.50” Tall x 13.5” Long x 5.5”
Wide
USING
minum housing is vertically adjustable (up to 1”) which allows housing to be flush with ceiling.
HANGERS
housing is equipped with pre-installed adjustable barhangers to locate the housing between joist with 16” to 24”
7-12
Catalog #
Project
Comments
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
QL6- 6” LED Down Light
This 6” LED unit uses just under 13 watts of power
and provides 750 lumens for excellent task and
general lighting applications. Using high quality CREE
chips, this fixture produces extremely crisp light with
a design which blends the face of the light to the
ceiling- giving it an unobtrusive look while on or off.
The shallow depth of the shade helps in allowing
more light to exit to your space, plus it doesn’t give
the impression of a big hole in the ceiling.
In addition, special care was made with the layout of
the LEDs along with the shade so that multiple
shadows are totally eliminated with this fixture. Most
LED fixtures, when an object is in front of them, will
produce overlapping shadows on the illuminated
surface. This may cause eye irritation and
distractions when looking and illuminated objects and
surfaces.
It is dimmable to 5%, Energy Star Rated, UL certified
and Title 24 compliant.
QL6 LED Down Light
• 2700K/ 3000k Color Temperature
• 12.99 Watts
• 750 Lumen Output
• 7.5” Outside Diameter x 5” Depth
• Paintable Trim
• CRI: 80+
• 3 Year Warranty
• Damp Location Listed
• GU24 Base
• 80º Beam Spread
DH100ICAT
6” Line Voltage
Ordering Information New Construction
Type
QL6
-
-
Date
Color
Temperature
ODUCT SPECIFICATION DATA
2700k
Double Wall IC Airtight Housing
Mounting
Type
New Construction
CRIPTION
3000k
Remodel
ne voltage 120V New Construction Double Wall IC Airtight Housing rated for 100W. Can be in direct contact with
ation.
TURES
/ cUL listed for damp location, feed-through wiring, and direct contact with insulation
ermally protected against misuse of insulation materials and improper lamping
aled housing to prevent airflow from air conditioned or heated areas into ceiling
using adjusts to accomodate various ceiling thickness
ustable socket mounting plate for proper positioning of different lamp types
n be dimmed using standard incandescent dimmer
6” IC Airtight Housing with Title 24
Socket
• 7.50” Tall x 10.125” Long x 7” Wide
• 5.625” Ceiling Cutout
• Remodel: 7.50” Tall x 13.5” Long x 5.5”
Wide
USING
minum housing is vertically adjustable (up to 1”) which allows housing to be flush with ceiling.
HANGERS
housing is equipped with pre-installed adjustable barhangers to locate the housing between joist with 16” to 24”
7-12
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
DL Series- 5” & 6” 1000 Lumen LED Down Light
This 5” LED unit uses just under 15 watts of power
but provides 1000 lumens for excellent task and
general lighting applications
The light engine- chips, lens, heat sink and power
supply are manufactured by CREE. In addition, it is
available in multiple finishes.
It can be dimmed down to 5%, is Energy Star Rated
with UL certifications and Title 24 compliant.
The 6” version is called the DL6-1000. It has exactly
the same specifications except the trim is wide
enough to cover a 6” opening.
Available with an Edison base for existing housings or
a GU-24 base for Title 24 applications.
Ordering Information
DL51DL61-
Catalog #
Project
Color
Temperature
2700k
3000k
4000k
Mounting
Type
Finish
Comments
• 2700K/ 3000k/ 4000k Color Temperature
• 14.6 Watts
• 1000 Lumen Output
• 6.5” Outside Diameter x 5.25” Depth
• Multiple Finishes Available
• CRI: 91
• 7 Year Warranty
• Damp Location Listed
• Available with Edison or GU24 Base
Trim
DH100ICAT
New Construction
Type
Remodel
Date
-
DL5-1000 LED Down Light
6” Line Voltage
White New Construction
Smooth
Double
Airtight
Bronze Wall IC
Step
Baffle Housing
Natural
Copper
Black (with white flange)
ODUCT SPECIFICATION DATA
CRIPTION
ne voltage 120V New Construction Double Wall IC Airtight Housing rated for 100W. Can be in direct contact with
ation.
TURES
/ cUL listed for damp location, feed-through wiring, and direct contact with insulation
ermally protected against misuse of insulation materials and improper lamping
aled housing to prevent airflow from air conditioned or heated areas into ceiling
using adjusts to accomodate various ceiling thickness
ustable socket mounting plate for proper positioning of different lamp types
n be dimmed using standard incandescent dimmer
5” IC Airtight Housing with Title 24
Socket
• 7.50” Tall x 10.125” Long x 7” Wide
• 5.625” Ceiling Cutout
• Remodel: 7.50” Tall x 13.5” Long x 5.5”
Wide
USING
minum housing is vertically adjustable (up to 1”) which allows housing to be flush with ceiling.
HANGERS
housing is equipped with pre-installed adjustable barhangers to locate the housing between joist with 16” to 24”
3-12
5" SURFACE MOUNT
Products
PRODUCT
PHOTOS
MODEL NO.:
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
VARIOUS sales@litelineinc.com
www.litelineinc.com
6” Surface Mount LED
S105C01xxxyySD1zz
(5" Round Flat, Donut)
S205C01xxxyySD1zz
(5" Round Dish, Donut)
S305C01xxxyySD1zz
(5"Optional
Square Flat,
Donut)
Diffusers
Donut
6" SURFACE MOUNT Products
Solid
Double
Vandal Resistant
Use this fixture for any application where recessed lights are not an option or desired. It will mount into most
standard junction boxes and is dimmable with most dimmers. Available as a square or circle with a flat or
beveled face.
S405C01xxxyySD1zz
• Designed, Engineered and Manufactured in USA
• Up to 1500+ lumen output. Even higher for 5000K+ color temperatures.S106C01xxxyySD1zz
(5" Square Chamfer,
(6" Round Flat, Donut)
• Mounts to most junction boxes.
100,000
hour
life
Active
thermal
feedback
monitors
both
LED
&
driver
to protect against overheating and
Donut)
•
allowing for extra long life.
• 170º Beam spread.
• Multiple diffuser options available.
• Serial number control – assures a replacement light can be matched to existing installed lights.
• 100% Aluminum with 40% recycled content.
• 2700K, 3000K, 3500K, 4000K, 5000K
• UL1598 Surface Mount Listed
• Available in 120 volt, 240 volt, 277 volt.
• Wet Location (under ceiling cover) listed
• 5 Year limited warranty for both LED and driver.
4-13
51-F University Ave.
Los
Gatos,
CA 95030
S108C01xxxyySD1zz
(8" Round Flat,
Donut)
p. 408-399-9000
| f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
8" SURFACE MOUNT Products
PRODUCT PHOTOS
MODEL NO.: VARIOUS
8” Surface MountS308C01xxxyySD1zz
LED
(8" Square Flat, Donut)
S108C01xxxyySD1zz
S208C01xxxyySD
(8" Round Flat, Donut)
(8" Round Dish, Donu
PRODUCT PH
MODEL N
S508C01xxxyySD1zz
8" SURFACE MOUNT Products
(8" Round Step, Donut)
S308C01xxxyySD1zz
(8" Square Flat, Donut)
S208C01xxxyySD1zz
S408C01xxxyySD
(8" Square Chamfer,
Optional Diffusers
(8" Round Dish, Donut)
S608C01xxxyySD1zz
(8" Square Step, Donut)
S108C01xxxyySD1zz
(8" Round Flat, Donut)
S508C01xxxyySD1zz
S408C01xxxyySD1zz
(8" Round
(8" Square Chamfer,
Donut)Step, Donut)
Donut
Solid
S208C01xxxyySD1
(8" Round Dish, Donu
Double
Vandal Resistant
S508C01xxxyySD
(8" Round Step, Doub
Use this fixture for any application where recessed lights are not an option or desired. It will mount into most
S308C01xxxyySD1zz
standard junction boxes and is dimmable with most dimmers.
Available
as a square, circle or octagon withS408C01xxxyySD1
a flat,
S708C01xxxyySD1zz
(8" Square Flat,
Donut)
(8" Square Chamfer, D
beveled or stepped face.
(8" Octagonal Step, Donut)
• Designed, Engineered and Manufactured in USA
• Up to 1900+ lumen output. Even higher for 5000K+ color temperatures.
• Mounts to most junction boxes.
monitors both LED & driver to protect against overheating and
S608C01xxxyySD1zz
• 100,000 hour life - Active thermal feedback
(8"
Square Step, Donut)
allowing for extra long life.
• 170º Beam spread.
S508C01xxxyySD2zz
S508C01xxxyySD1zz
S508C01xxxyySD2
• Multiple diffuser options available.
(8" Round Step, Double)
(8" Round Step, Donut)
(8" Round Step, Doub
• Serial number control – assures a replacement light can be matched to existing installed lights.
• 100% Aluminum with 40% recycled content.
• 2700K, 3000K, 3500K, 4000K, 5000K
• UL1598 Surface Mount Listed
• Available in 120 volt, 240 volt, 277 volt.
• Wet Location (under ceiling cover) listed
• 5 Year limited warranty for both LED and driver.
4-13
S608C01xxxyySD1zz
DESIGN
TEMP (CCT)
P062
LP2
35K
N06
51-F University Ave.
LP2 – Power Input (120VACin), 27K – 2700Kelvin
P042 – 4 LED
Los35K
Gatos,
CA S95030
Control Method (Phase),
P062 – 6 LED
N06 – Round
– 3500Kelvin
Version (2)
40K – 4000Kelvin
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
MECHANICAL SPECIFICATIONS:
www.litelineinc.com
see Power Plate Layout Drawings
C
P
TYLE
Power Plate LED Surface Mount
1.6
Ø16.0 @ 6LED's
Ø14.0 @ 4LED's
Use this fixture for any application where recessed
lights are not an option or not desired. Not only will it
mount to a standard junction box, but it is dimmable
with most standard dimmers.
This document contains proprietary and confidential information and may not be disclosed without written permission from Silesc
For new construction applications use the low voltage
version which offers digital dimming, connectivity to smart
grid technology and a 100,000 hour lamp life. Contact us for more information.
The line voltage version has a 50,000 hour lamp life.
• Manufactured in USA, exceeds NAFTA domestic product requirements with >80% domestic content.
• Designed to have the smallest environmental footprint – Ship 5 units to one CFL down light.
• All fixtures are manufactured with up to with up to 80% recycled content and RoHS compliant.
• Shipped in 100% recycled packaging.
• Advanced Intelligent Driver (AID) – is designed as an integral component and protects both led and driver
from failure.
• Serial number control – assures a replacement light can be matched to existing installed lights.
• Robust thermal management – Protects luminaire for both sustained and lifetime performance - reduces heat
impact on HVAC
• 50,000 Life Span (120 Volt) & 100,000 hour Life Span (Low Voltage)
• Chips and driver are one unit- no soldering. This equals fewer potential failure points and greater heat
management.
• 14” diameter for 60 watt/ 16” diameter for 88 watt with a 1.6” drop.
CCT
2700k
3500k
4000k
Wattage
60/ 88
60/ 88
60/ 88
Lumens
2600/ 3900
2800/ 4200
3000/ 4500
Efficacy
43/ 44
47/ 47
50/ 51
Power Factor
0.91
0.91
0.91
80+ CRI for all color temperatures
4-11
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Replacement LED T8/ T12 Bulb
Featuring a unique design, the NL series LED T8 replacement bulbs features side firing LEDs in a half oval shape
bulb rather than a traditional cylindrical form. This allows the dots of the LEDs to blend together and provide a
glare free, soft light. In addition, these replacement bulbs allow you to keep your existing fixture and limit the
amount of waste when upgrading- as opposed to discarding your old light and installing a brand new fixture.
Simply disconnect the existing ballast and wire the 120 - 277 volt LED driver inside the fluorescent housing, then
install the bulbs.
In addition to 0-10V dimming, the driver has two settings- standard and energy saver. Standard provides 2150
lumens per bulb and energy saver provides 1750 to 1800 lumens.
• Made in the USA
• DLC Approved
• 4’ Lengths @ 22.5 Watts (18 Watts in Energy Saver Mode)
• 3500K, 4000K, 4500K
• Universal Socket Compatibility (shunted and non shunted)
• 0-10V Dimming
• L70 @ >50,000 Hours
• Made From Recyclable, Shatterproof Materials
• Identical Installation to Existing Fluorescent Lamps and Ballasts
• UL Approved LED Retrofit Kit: 1598C, LED Driver: 8750 & 1310
• 5 Year Warranty
3-13
2’ x 2’ LED Troffer
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
This 2’ x 2’ troffer is compact and efficient for spaces requiring high efficiency, high quality general purpose lighting.
Powered by Cree TrueWhite® Technology, it delivers high efficacy and a world class of 90 CRI. This allows you to get
superior color accuracy with bright, beautiful light characteristics and constant color temperature- all while providing
significant energy savings over comparable fluorescent fixtures.
Compared to equivalent fluorescent fixtures, this unit uses roughly 50% less power, lasts over three times as long,
contains no Mercury and has no maintenance for 15+ years.
• Designed and manufactured in the USA
• 23.7” square x 4.9” high
• Cree Truwhite® Technology with active color management- LEDs will no discolor over time
• Innovative thermal management allows cooler running LEDs along with architectural grade aesthetics
• Durable steel housing with field replacement light engine
• Proprietary optical system combines reflective and refractive optical components to achieve a uniform appearance
• Integral, high efficiency driver and power supply with a power factor of 0.90
• Step dimming to 50% light level
• Optional 0-10v dimming available
• Designed for a minimum lifetime of 50,000 hours
• Two wattage versions available- 22 watts and 35 watts
• 5 Year warranty
• Input voltage 120-277 VAC
• UL LIsted
CCT
3500k/ 4000k
3500k/4000k
Wattage
22
35
Lumens
2000
3200
Efficacy
90
90
90 CRI for all color temperatures
4-11
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
1’ x 4’ LED Troffer
This 1’ x 4’ troffer is compact and efficient for spaces requiring high efficiency, high quality general purpose lighting.
Powered by Cree TrueWhite® Technology, it delivers high efficacy and a world class of 90 CRI. This allows you to get
superior color accuracy with bright, beautiful light characteristics and constant color temperature- all while providing
significant energy savings over comparable fluorescent fixtures.
Compared to equivalent fluorescent fixtures, this unit uses roughly 50% less power, lasts over three times as long,
contains no Mercury and has no maintenance for 15+ years.
• Designed and manufactured in the USA
• 47” Long x 11.7” Wide x 4.9” Height
• Cree Truwhite® Technology with active color management- LEDs will no discolor over time
• Innovative thermal management allows cooler running LEDs along with architectural grade aesthetics
• Durable steel housing with field replacement light engine
• Proprietary optical system combines reflective and refractive optical components to achieve a uniform appearance
• Integral, high efficiency driver and power supply with a power factor of 0.90
• Step dimming to 50% light level
• Optional 0-10v dimming available
• Designed for a minimum lifetime of 50,000 hours
• Two wattage versions available- 22 watts and 35 watts
• 5 year warranty
• Input voltage 120-277 VAC
• UL Listed
CCT
3500k/ 4000k
3500k/ 4000k
3500k/ 4000k
3500k/ 4000k
Wattage
22
44
36
50
Lumens
2200
4000
4000
5000
Efficacy
100
90
110
100
90 CRI for all color temperatures
4-11
51-F University Ave.
Los Gatos, CA 95030
p. 408-399-9000 | f. 408-354-8575
sales@litelineinc.com
www.litelineinc.com
Replacement LED Bulbs
These LED bulbs are designed as replacements for Par 20, 30, 38, a standard A base and an MR16.
They are good for track systems, decorative and exterior fixtures.
Each bulb is available in multiple color temperatures and beam spreads. Color temperature will affect
the lumen output. Each bulb has a 5 year warranty.
Bulb
MR16
A19
Par 20
Par 30
Par 38
Wattage
3.5 - 12
8-12
8
15
18
Equivalence
20- 50 Watt
Halogen
60-100W
Incandescent
50 Watt
Halogen
75 Watt
Halogen
90 Watt
Halogen
Lumens
145+
Up to 1200
~350
~810
~1200
3-13