Lozier | End Cap with Full Height Wing Panels
http://www.lozier.com/products/end-caps/wing/end-cap-with-full-height-wing-panels/
| You are in: Lozier > Products > End Caps > Wing > End Cap with Full Height Wing Panels
End Cap with Full Height Wing Panels
Part Number:
Wall End Display End Cap featuring Full Height Accessory Panels for wings.
Product Details:
How to Order
This End Cap features a combination of Lozier Products.
See below for details.
Wall End Displays
Freestanding End Display
Pegboard Front Panel and Marteck Back Panel
Other Back Panel styles available
Order Shelves separately
Order Gap Filler to close off bottom rear when unit is wider than Island
width (example: 3’W WED on 35"W Island)
Actual width of unit equals the nominal width plus 2"
Base End Trim and Closed Base Front available in CHR only
Evenly distributed load of 600 lbs per Deck (13"-19"D) and 800 lbs per
Deck (22"-25"D)
TO ORDER OTHER BACK STYLES
Delete the Peg Front and/or Marteck Rear Back(s) and replace with the desired Back(s)
If Slotwall Backs desired, order required Rails
TO ORDER DECKS WITH ALUMINUM MOLDING
Delete Standard Deck and add Deck with Molding
Product Options and Numbers
Example Part #: WED 4 60 22 LB S PLT PLT PLT
Wall End Display: WED
Unit Width: 2', 30", 3', 4'
Uprite Height: 48", 54", 60", 66", 72", 78", 84", 90", 96"
Base Deck Depth: 13", 16", 19", 22", 25"
Base Height: LB, Omit for 06 Base
Spring Locking Base Bracket: S
Uprites and Uprite Trim Standard Finish: PLT, Optional Catalog Colors
Back and Rail Standard Finish: PLT, Optional Catalog Colors
Deck Standard Finish: PLT, Optional Catalog Colors
Suffix Key
LB
- Low Base (6"H)
06
- 06 Base (8"H)
PLT
- Platinum
WED SIZES
Height
Depth
48"
54"
13"
60"
66"
72"
78"
84"
90"
96"
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
16"
19"
22"
25"
Full Height Wing to Wall End Display Accessory Panel Connectors
Accessory Panel Connectors are needed to attach Accessory Panels to
Wall or Contoured End Display, End Merchandising Panels and Close Off
Panel
Order APWF when installing a Full Height Accessory Panel (FHAP) to the
Wall End Display; when installing on a T-Leg Wall End Display, order with
a Flush Accessory Panel (FAP)
A Wall End Display Rail (WEDER) is required, order separately
See Installation Instructions for load capacities and limitations
INCLUDES
Upper Connector
Base Angle
Hardware Pack
Product Options and Numbers
Example Part #: APWF 06 PLT PLT
Full Height Wing to Wall End Display Accessory Panel Connectors: APWF
Base Type: 06, LB, TL (FAP Only)
N/A
Upper Connector Standard Finish: PLT, Optional Catalog Colors
Lower Connector Standard Finish: CHR, Optional Catalog Colors
Suffix Key
06
- 06 Base (8"H)
LB
- Low Base (6"H)
TL
- T Leg
FAP
- Flush Accessory Panel
PLT
- Platinum
CHR
- Charcoal Black
Full Height Accessory Panel
Full Height version of Flush Accessory Panel (FAP)
Panel extends past the Base End Trim or End Deck and rests on the floor
with leveling legs
Not compatible with T-Leg Wall End Displays
Product Options and Numbers
Example Part #: FHAP 60 16 P M PLT PLT PLT
Full Height Accessory Panel: FHAP
Height: 42", 48", 54", 60", 66", 72", 78", 84", 90", 96"
Width: 14", 16", 18", 24", 30", 36"
Exterior Panel Style: P, M, P2, M2, S, SI, WG, SG, LG, MG
Interior Panel Style (if required): M, M2, Omit if P2 Exterior Panel
Exterior Panel Standard Finish: PLT, Optional Catalog Colors, Optional Catalog Laminates for Slotwall only
Aluminum Insert (if required): ALU (SI only)
Interior Panel Standard Finish (if required): PLT, Optional Catalog Colors, Omit if P2 Exterior Panel
Frame Standard Finish: PLT, Optional Catalog Colors
Suffix Key
P
- Pegboard Back
M
- Marteck Back
P2
- Single Pegboard Back, painted two sides
M2
- Single Marteck Back, painted two sides
S
- Slotwall Back
SI
- Slotwall Back with Inserts
WG
- 3x3 Wire Grid Back
SG
- Slot Grid Back
LG
- Louver Grid Back
MG
- Multi-Grid Back
PLT
- Platinum
ALU
- Aluminum
Vertical Sign Channel for Wing Panel
Contact your Sales Rep for ordering Information
Product Options and Numbers
Part #: CDC410
TL Shelf
Two position tilt-in Shelf with extended bracket
Angular adjustment: flat or 17° downslope
Molding accommodates a 1.235" tag
1/4" perforations for clip-on accessories
Can order with Aluminum Tag Moldings installed or can order Molding for
Shelf separately
Product Options and Numbers
Example Part #: TL 4 19 N PLT
TL Shelf: TL
Width: 2’, 30", 3’, 4'
Depth: 7”, 10”, 13", 15", 16", 17", 19”, 20", 22", 25", 28", 31"
Molding: N, M13S, M13G, M35S, M35G
Standard Finish: PLT, Optional Catalog Colors
Suffix Key
N
- No Molding
M13S
- M13 Satin Molding
M13G
- M13 Gold Molding
M35S
- M35 Satin Molding
M35G
- M35 Gold Molding
PLT
- Platinum
Downslope
Shelf Depth
Flat
17°
7"
300 lbs
300 lbs
10" - 25"
500 lbs
250 lbs
28" & 31"
400 lbs
200 lbs
Lbs. evenly distributed
DL Shelf
Three position, drop-in shelf with extended bracket
Angular adjustment: flat, 17° or 30° downslope
1/4" perforations for clip-on accessories
Can order with Aluminum Tag Moldings or can order Molding for shelf
separately
Product Options and Numbers
Example Part #: DL 4 19 N PLT
DL Shelf: DL
Width: 2’, 30", 3’, 4'
Depth: 7”, 10”, 13", 15", 16", 17", 19”, 20", 22", 25", 28", 31"
Molding: N, M13S, M13G, M35S, M35G
Standard Finish: PLT, Optional Catalog Colors
Suffix Key
N
- No Molding
M13S
- M13 Satin Molding
M13G
- M13 Gold Molding
M35S
- M35 Satin Molding
M35G
- M35 Gold Molding
PLT
- Platinum
Downslope
Shelf Depth
Flat
17°
30°
7"
300 lbs
300 lbs
125 lbs
10" - 19"
500 lbs
250 lbs
250 lbs
20" - 25"
500 lbs
250 lbs
125 lbs
28" & 31"
400 lbs
200 lbs
100 lbs
Lbs. evenly distributed.