Ordering information
AC-DC Power Supplies PCB Mount Type
VAA5
VAA
1
5
2
05
3
1Series name
2Output wattage
3Output voltage
R
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
VAA
VAA505
5.0
VOLTAGE[V] 5
CURRENT[A] 1.0
VAA512
5.4
12
0.45
SPECIFICATIONS
VAA
INPUT
OUTPUT
PROTECTION
CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
MODEL
VOLTAGE[V]
*1
CURRENT[A]
*1
EFFICIENCY[%]
FREQUENCY[Hz]
INRUSH CURRENT[A] *1
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
0 to +55C *2
RIPPLE[mVp-p]
-10 - 0C *2
0 to +55C *2
RIPPLE NOISE[mVp-p]
-10 - 0C *2
TEMPERATURE COEFFICIENT[mV] -10 to +55C
*3
DRIFT[mV]
OUTPUT VOLTAGE ADJUSTMENT RANGE
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE SETTING[V] *1
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION
INPUT-OUTPUT
INPUT-FG
OUTPUT-FG
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS
CONDUCTED NOISE
CASE SIZE/WEIGHT
COOLING METHOD
VAA505
AC85 - 132 1f or DC110 - 170
0.13typ (ACIN 100V, Io=100%)
VAA512
75typ
77typ
47 - 440 or DC
15typ (ACIN 100V, Io=100%)
0.5max (60Hz According to UL and DEN-AN)
5
12
1.0
0.45
20max
48max
40max
100max
80max
120max
140max
160max
120max
150max
160max
180max
50max
120max
20max
48max
Fixed
200max (ACIN 85V, Io=100%)
10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%)
4.90 - 5.30
11.40 - 12.60
Works over 105% of rating and recovers automatically
Works over 115% of rating (by zener diode clamping)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature)
-10 to +70C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
19.6m/s2 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis (Non operating)
196.1m/s2 11ms, once each X, Y and Z axis (Non operating)
UL60950-1, C-UL Complies with DEN-AN (External Fuse is required)
Complies with FCC-B, additional capacitors required for meeting VCCI class B
32X18X65mm [1.26X0.71X2.56 inches] (WXHXD) / 30g max
Convection
*1 Rated input/output Ta=25C
*2 This is the value that measured on measuring board with capacitor of 22mF. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101).
*3 Drift is the charge in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
VAA-2
VAA_E.indd 2
15.6.18 5:55:50 PM
VAA5
External view
35
Recommended size for
processing PCB
(TOP VIEW)
[1.38]
AC
Outline
FG
35
[0.05]
12
[0.47]
7.5
[0.3]
27
[1.06]
2.5
[0.1]
12
[0.47]
7.5
[0.3]
27
[1.06]
32
[1.26]
[1.38]
2.5
[0.1]
AC
4.5
Name Plate
[0.18]
57
[2.24]
65
[2.56]
4.5
57
[0.18]
[2.24]
¶ Dimensions in mm, [
¶ Unit: 2mm
4
4
[0.16]
[0.07]
[0.04]
bottom cover
[0.16]
Input/Output Pin
bottom cover
[0.53]
(13.5)
[0.71]
(TOP VIEW)
[0.04]
[0.07]
]= inches
¶ Weight: 30g max
¶ Tolerance: ± 0.5 [±0.02]
¶ PCB material: CEM-3
¶ PCB thickness: t=1.0 [0.04]
¶ Pin material: CPW with solder plated
¶ Recommended hole dia. to PCB: º1.3
¶ Dimensions in mm, [ ]= inches
VAA
VAA
Performance data
¡RISE TIME & FALL TIME (VAA512)
OUTPUT VOLTAGE
5V/DIV
¡STATIC CHARACTERISTICS (VAA512)
DC Output
Input Voltage AC 85V
Input Voltage AC132V
12.07
12.05
AC Input
12.03
ACIN 85V Io=100%
0
0.25
0.50
0.75
20ms/DIV
OUTPUT CURRENT
¡OVERCURRENT CHARACTERISTICS (VAA512)
¡DERATING CURVE
14
12
LOAD FACTOR
OUTPUT VOLTAGE
100
10
8
6
Input Voltage AC 85V
Input Voltage AC132V
4
80
ACIN85 115V
ACIN116 132V
60
40
20
0
-10
0
10
20
30
40
50
60
70
AMBIENT TEMPERATURE
2
0
0.25
0.50
0.75
OUTPUT CURRENT
VAA-3
VAA-3
VAA_E.indd 3
15.6.18 5:55:50 PM
Ordering information
AC-DC Power Supplies PCB Mount Type
VAA10
VAA
1
10
2
05
3
1Series name
2Output wattage
3Output voltage
R
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
VAA
VAA1005
10.0
VOLTAGE[V] 5
CURRENT[A] 2.0
VAA1012
10.8
12
0.9
SPECIFICATIONS
VAA
INPUT
OUTPUT
PROTECTION
CIRCUIT
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
MODEL
VOLTAGE[V]
*1
CURRENT[A]
*1
EFFICIENCY[%]
FREQUENCY[Hz]
INRUSH CURRENT[A] *1
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
LINE REGULATION[mV]
LOAD REGULATION[mV]
0 to +55C *2
RIPPLE[mVp-p]
-10 - 0C *2
0 to +55C *2
RIPPLE NOISE[mVp-p]
-10 - 0C *2
TEMPERATURE COEFFICIENT[mV] -10 to +55C
*3
DRIFT[mV]
OUTPUT VOLTAGE ADJUSTMENT RANGE
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE SETTING[V] *1
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION
INPUT-OUTPUT
INPUT-FG
OUTPUT-FG
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS
CONDUCTED NOISE
CASE SIZE/WEIGHT
COOLING METHOD
VAA1005
VAA1012
AC85 - 132 1f or DC110 - 170
0.3typ (ACIN 100V, Io=100%)
76typ
77typ
47 - 440 or DC
15typ (ACIN 100V, Io=100%)
0.5max (60Hz According to UL and DEN-AN)
5
12
2.0
0.9
20max
48max
40max
100max
80max
120max
140max
160max
120max
150max
160max
180max
50max
120max
20max
48max
Fixed
200max (ACIN 85V, Io=100%)
10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%)
4.90 - 5.30
11.40 - 12.60
Works over 105% of rating and recovers automatically
Works over 115% of rating (by zener diode clamping)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature)
-10 to +70C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
19.6m/s2 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis (Non operating)
196.1m/s2 11ms, once each X, Y and Z axis (Non operating)
UL60950-1, C-UL Complies with DEN-AN (External Fuse is required)
Complies with FCC-B, additional capacitors required for meeting VCCI class B
32X18X72.5mm [1.26X0.71X2.85 inches] (WXHXD) / 35g max
Convection
*1 Rated input/output Ta=25C
*2 This is the value that measured on measuring board with capacitor of 22mF. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101).
*3 Drift is the charge in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
VAA-4
VAA_E.indd 4
15.6.18 5:55:51 PM
VAA10
External view
Recommended size for
processing PCB
(TOP VIEW)
72.5
5- 1.3
[1.67]
[0.05]
64.5
[2.54]
1.7
4
5- 1.0 [0.04]
(stopper 1.7 [0.07] )
[0.16]
[0.07]
12
[0.47]
7.5
]= inches
¶ Weight: 35g max
¶ Tolerance: ±0.5 [±0.02]
¶ PCB material: CEM-3
¶ PCB thickness: t=1.0 [0.04]
¶ Pin material: CPW with solder plated
¶ Recommended hole dia. to PCB: º1.3
¶ Dimensions in mm, [ ]= inches
[0.71]
1
[0.1]
Input/Output Pin
bottom cover
[0.3]
27
[1.06]
32
[1.26]
4.5
[0.18]
¶ Dimensions in mm, [
¶ Unit: 2mm
18
(13.5)
[0.53]
2.5
AC
(TOP VIEW)
2.5
V
[1.06]
12
[0.47]
27
7.5
[0.3]
V
[0.1]
FG
AC
Name Plate
Outline
[2.54]
4
42.5
[1.67]
42.5
64.5
[0.16]
4.5
[0.18]
[2.85]
1.0
[0.04]
bottom cover
VAA
VAA
Performance data
¡RISE TIME & FALL TIME (VAA1012)
OUTPUT VOLTAGE
5V/DIV
¡STATIC CHARACTERISTICS (VAA1012)
DC Output
Input Voltage AC 85V
Input Voltage AC132V
12.07
12.05
AC Input
12.03
ACIN 85V Io=100%
0
0.5
1.0
1.5
20ms/DIV
OUTPUT CURRENT
¡OVERCURRENT CHARACTERISTICS (VAA1012)
¡DERATING CURVE
14
12
LOAD FACTOR
OUTPUT VOLTAGE
100
10
8
6
Input Voltage AC 85V
Input Voltage AC132V
4
80
ACIN85 115V
ACIN116 132V
60
40
20
0
-10
0
10
20
30
40
50
60
70
AMBIENT TEMPERATURE
2
0
0.5
1.0
1.5
OUTPUT CURRENT
VAA-5
VAA-5
VAA_E.indd 5
15.6.18 5:55:51 PM