Pendant
& Surface
Fluorescent
VersaLux
VersaLux Pendant/Sur
Pendants
Surface
Extruded aluminum construction
with no exposed hardware.
Linear
Linear
Uniform direct or indirect
illumination.
Daylight and occupancy
sensor capable.
Made-to-measure custom
custom
confi gurations
confi
gurations
adapt toadapt
any
Wallwash
Wallwash
Geometric
Wall Bracket
to any architectural
architectural
space. space.
Available as:
wall or ceiling
surface mounted
fi xtures
cable or stem
mounted pendants
Surface MR16 Open Aperture Fluorescent/Point Source
2
rface
PH2
Linear Pendant
Direct
Features
• Nominal 2", 4" and 6" fixture widths
• Lengths made-to-measure
• One or two lamp cross sections (2" profile: one lamp only)
• Custom configurations with fully illuminated corners
• Staggered lamps to minimize socket shadows
• DuraFrost acrylic snap-in lens for flush appearance
(81% efficiency)
Indirect
Fixture Specifications
• Housing: extruded aluminum and CNC fabricated
gear tray from 20 gauge steel
Electrical
• Ambient temperature 100 °F. maximum
• Integral electronic ballast(s), thermally protected
• 120 VAC or 277 VAC
Options
• Custom finishes
Direct/Indirect
• Dimming ballast
• Occupancy sensor
• Daylight control module
• Emergency ballast
• Integrated downlight: MR16, MR16 LED
(PD and PH: 4", 6" profile only)
• For Nippo, Feelux, or Lumilux Seamless lamps, consult factory
(PD and PH: 4", 6" profile only)
For special conditions, consult factory
See website for specification sheet downloads
4
Profi le
Sectional Side View
5" Sq.
2"
As Per
Order
Direct Pendant
with Flush Snap-in Lens
2.75"
Series PD
PD2 2.375"W x 2.75"H
2.375"
PD4 3.375"W x 4.75"H
PD6 5.375"W x 4.75"H
5" Sq.
2"
As Per
Order
Indirect Pendant
with Flush Snap-in Lens
2.75"
Series PU
PU2 2.375"W x 2.75"H
PU4 3.375"W x 4.75"H
2.375"
5" Sq.
2"
As Per
Order
Direct/Indirect Pendant
with Flush Snap-in Lens
Series PH
4.75"
PH2 2.375"W x 4.75"H
PH4 3.375"W x 4.75"H
PH6 5.375"W x 4.75"H
2.375"
Ordering Guide
VersaLux
Series
Profile
PD
PU
PH
2
4
6
# T5 Lamps in
Cross Section
T5
Wattage
1
2
14 / 24HO
21 / 39HO
28 / 54HO
35 / 80HO
Ballast
Length
Finish
Voltage
E Electronic (std)
D Dimming
24"
36"
48"
72"
96"
W White
1 120
2 227
5
Wallwash Pendant
Wallwash
Features
• Narrow aperture features a clean unobtrusive visual aesthetic
• Precision engineered parabolic optics effectively eliminate unsightly
scallops and striations from the ceiling to the floor
• Asymmetrical light distribution delivers exceptional visual uniformity,
precise wall/ceiling cut-off and balanced ceiling illumination
• Continuous run lengths available with no socket shadowing at seams
Fixture Specifications
• Housing: precision CNC fabricated housing
and gear tray from 20 gauge steel
Electrical
• Ambient temperature 100 °F. maximum
• Integral electronic ballast(s), thermally protected
• 120 VAC or 277 VAC
Options
• Custom finishes
• Dimming ballast
• Occupancy sensor
• Daylight control module
• Emergency ballast
For special conditions, consult factory
See website for specification sheet downloads
6
Profi le
Sectional Side View
5" Sq.
2"
As Per
Order
Wallwash Pendant
4.468"
Series PW
PW4 3.203"W x 4.468"H
3.203"
Ordering Guide
VersaLux
Series
Profile
# T5 Lamps in
Cross Section
T5
Wattage
PW
4
1
14 / 24HO
21 / 39HO
28 / 54HO
35 / 80HO
Ballast
Length
Finish
Voltage
E Electronic (std)
D Dimming
24"
36"
48"
72"
96"
W White
1 120
2 227
7
Geometric Pendant
Rectangular
Features
• Choice of fixture sizes
• 48" standard height set via adjustable cable hardware
• Choice of lamp configurations
• Acrylic lens, rabbeted for flush appearance
Fixture Specifications
• Rectangular/Square housing: die formed with CNC fabricated
gear tray from 20 gauge steel
Square
• Round housing: aluminum spinning with CNC fabricated
gear tray from 20 gauge steel
Electrical
• Ambient temperature 100 °F. maximum
• Integral electronic ballast(s), thermally protected
• 120 VAC or 277 VAC
Options
• Custom finishes
• Dimming ballast
Round
• Occupancy sensor
• Daylight control module
• Emergency ballast
For special conditions, consult factory
See website for specification sheet downloads
Acrylic Lens
Options
Lens
Efficiency
Cat. No.
2067-P95
67%
(standard)
2447-P95
47%
47P
Prismatic
87%
PR
D-Glare, Hi-Def
93%
DH
For other lens options, consult factory.
8
Perspective View
Rectangular Direct/Indirect Pendant
with Flush Lens
PS4-2
12" x 48"- Wattage: 28/54HO
48"
PS4-4
24" x 48"- Wattage: 28/54HO
48"
4"
12"
Square Direct/Indirect Pendant
with Flush Lens
PS4-4
24" x 24"- Wattage: 14/24HO
48"
PS4-4
35" x 35"- Wattage: 21/39HO
4"
24"
24"
Round Direct/Indirect Pendant
with Flush Lens
PR4-2C
Ø16"- Wattage: 40/22
48"
PR4-2C
Ø20"- Wattage: 40/22
PR4-3
Ø30"- Wattage: 40/24
4.125"
Ø20"
Ordering Guide
VersaLux
Series
T5
Wattage
PS4-2
PS4-4
PR4-2C*
PR4-3*
(See above)
Ballast
Dimensions
Finish
Voltage
E Electronic (std)
D Dimming
(See above)
W White
1 120
2 227
* Electronic ballast only
9
Surface
Direct
Features
• Nominal 2", 4" and 6" fixture widths
• Lengths made-to-measure
• One or two lamp cross sections (2" profile: one lamp only)
• Custom configurations with fully illuminated corners
• Staggered lamps to minimize socket shadows
• DuraFrost acrylic snap-in lens for flush appearance
(81% efficiency)
Fixture Specifications
• Housing: extruded aluminum and CNC fabricated
gear tray from 20 gauge steel
Electrical
• Ambient temperature 100 °F. maximum
• Integral electronic ballast(s), thermally protected
• 120 VAC or 277 VAC
Options
• Custom finishes
• Dimming ballast
• Occupancy sensor
• Daylight control module
• Emergency ballast
• Integrated downlight: MR16, MR16 LED
(4", 6" profile only)
• For Nippo, Feelux, or Lumilux Seamless lamps, consult factory
(4", 6" profile only)
For special conditions, consult factory
See website for specification sheet downloads
10
Sectional Side View
Profi le
Mounting Surface
Direct Surface
with Flush Snap-in Lens
Series SD
4.75"
SD2 2.375"W x 2.75"H
SD4 3.375"W x 4.75"H
SD6 5.375"W x 4.75"H
3.375"
Ordering Guide
VersaLux
Series
SD
Profile
2
4
6
# T5 Lamps in
Cross Section
T5
Wattage
1
2
14 / 24HO
21 / 39HO
28 / 54HO
35 / 80HO
Ballast
Length
Finish
Voltage
E Electronic (std)
D Dimming
24"
36"
48"
72"
96"
W White
1 120
2 227
11
Surface Wallwash
Wallwash
Features
• Narrow aperture features a clean unobtrusive visual aesthetic
• Precision engineered parabolic optics effectively eliminate unsightly
scallops and striations from the ceiling to the floor
• Asymmetrical light distribution delivers exceptional visual uniformity,
precise wall/ceiling cut-off and balanced ceiling illumination
• Continuous run lengths available with no socket shadowing at seams
Fixture Specifications
• Housing: precision CNC fabricated housing
and gear tray from 20 gauge steel
Electrical
• Ambient temperature 100 °F. maximum
• Integral electronic ballast(s), thermally protected
• 120 VAC or 277 VAC
Options
• Custom finishes
• Dimming ballast
• Occupancy sensor
• Daylight control module
• Emergency ballast
For special conditions, consult factory
See website for specification sheet downloads
12
Sectional Side View
Profi le
Mounting Surface
Surface Wallwash
Series SW
4.468"
SW4 3.203"W x 4.468"H
3.203"
Ordering Guide
VersaLux
Series
Profile
# T5 Lamps in
Cross Section
T5
Wattage
SW
4
1
14 / 24HO
21 / 39HO
28 / 54HO
35 / 80HO
Ballast
Length
Finish
Voltage
E Electronic (std)
D Dimming
24"
36"
48"
72"
96"
W White
1 120
2 227
13
Wall Bracket
Direct
Features
• Nominal 2", 4" and 6" fixture widths
• Lengths made-to-measure
• One or two lamp cross sections (2" profile: one lamp only)
• Custom configurations with fully illuminated corners
• Staggered lamps to minimize socket shadows
• DuraFrost acrylic snap-in lens for flush appearance
(81% efficiency)
• ADA compliant (excluding BD/BH6)
Direct/Indirect
Fixture Specifications
• Housing: extruded aluminum and CNC fabricated
gear tray from 20 gauge steel
Electrical
• Ambient temperature 100 °F. maximum
• Integral electronic ballast(s), thermally protected
• 120 VAC or 277 VAC
Options
• Custom finishes
• Dimming ballast
• Occupancy sensor
• Daylight control module
• Emergency ballast
• Integrated downlight: MR16, MR16 LED
(4", 6" profile only)
• For Nippo, Feelux, or Lumilux Seamless lamps, consult factory
(4", 6" profile only)
For special conditions, consult factory
See website for specification sheet downloads
14
Sectional Side View
Profi le
3.875"
Direct Wall Bracket
with Flush Snap-in Lens
Series BD
4.75"
BD2 2.375"W x 4.75"H
BD4 3.375"W x 4.75"H
BD6 5.375"W x 4.75"H
Mounting
Surface
3.375"
3.875"
Direct/Indirect Wall Bracket
with Flush Snap-in Lens
Series BH
4.75"
BH2 2.375"W x 4.75"H
BH4 3.375"W x 4.75"H
BH6 5.375"W x 4.75"H
Mounting
Surface
3.375"
Ordering Guide
VersaLux
Series
BD
BH
Profile
2
4
6
# T5 Lamps in
Cross Section
T5
Wattage
1
2
14 / 24HO
21 / 39HO
28 / 54HO
35 / 80HO
Ballast
Length
Finish
Voltage
E Electronic (std)
D Dimming
24"
36"
48"
72"
96"
W White
1 120
2 227
15
visit us at
www.starfirelighting.com
Linear Slot
Linear Pendant
Linear Surface Mount
Video Conference / Wallwash
Downlight
Wallwash
Directional Point Source
Linear Point Source
Cove / Perimeter
Task / Cabinet
Marquee
Custom & Decorative
UL listed
Union manufactured in the USA
7 Donna Drive
Wood-Ridge, NJ 07075
P: 201.438.9540
F: 201.438.9541
www.starfirelighting.com
4
©2012 Starfire Lighting, Inc.
Pendant
& Surface
Fluorescent
VersaLux
Pendant
& Surface
Fluorescent
VersaLux