TITLE:
DIMENSIONAL DRAWING, 3243L
INTELLITOUCH ONLY
25.1
736.4
58
ACTIVE AREA =
392.9
BEZEL OPENING =394.85
443
ACTIVE AREA =
698.4
BEZEL OPENING =700.4
19
FRONT
SIDE
SEE DETAIL
REAR
A
BOTTOM
AC POWER IN
USB TOUCHSCREEN OUTPUT
OSD
VGA INPUT
HDMI INPUT
(NOT AVAILABLE ON ALL MODELS)
DVI INPUT
(NOT AVAILABLE ON ALL MODELS)
DETAIL
A
SCALE
4:5
OPTIONAL OSD REMOTE
P/N E483757
(1 INCLUDED WITH TOUCHMONITOR)
DIMENSIONS ARE IN MILLIMETERS
SHEET 1
OF 6
MS601335
DATE: 03/02/2016
REV: E
TITLE:
DIMENSIONAL DRAWING, 3243L
INTELLITOUCH ONLY
31.4
M4 THREADS,
MAX SCREW DEPTH = 8MM
X8
75
400
75
SIDE MOUNT HORIZONTAL (TOP/BOTTOM)
M6 THREAD
MAX THREAD DEPTH = 10MM, X4
400
M4 THREADS,
MAX SCREW DEPTH = 8MM
X8
200
VESA MOUNT PER MIS-F, 400,200, 6
DIMENSIONS ARE IN MILLIMETERS
SIDE MOUNT VERTICAL (LEFT/RIGHT)
SHEET 2
OF 6
MS601335
DATE: 03/02/2016
REV: E
TITLE:
DIMENSIONAL DRAWING, 3243L
INTELLITOUCH ONLY
MOUNTING WITH ADJUSTABLE BRACKETS (8 PROVIDED)
754.4
205
65 ,x8
10 ,x16
205
130
396.2
768.4
#0.5
475
461
130
701.7
#0.5
MOUNTING HOLES, x16,
FOR FRONT-ENTRY SCREWS:
CLEARANCE HOLES FOR M4
MACHINE SCREWS
4- R 2.2
RECOMMENDED CUSTOMER PANEL CUT-OUT
MOUNTING HOLES, x16,
FOR REAR-ENTRY SCREWS:
1. IF CUSTOMER PANEL IS WOOD,
PILOT HOLES FOR 4MM WOOD SCREWS.
2. IF CUSTOMER PANEL IS METAL,
BLIND TAPPED M4 THREADED HOLES FOR M4 STUDS.
1 to -25
DIMENSIONS ARE IN MILLIMETERS
SHEET 3
OF 6
MS601335
DATE: 03/02/2016
REV: E
TITLE: DIMENSIONAL DRAWING, 3243L
DETAIL
B
SCALE
1:1
PCAP ONLY
746.6
(EDGE OF GLASS)
55
SEE DETAIL
B
700.4
(ACTIVE AREA)
452.4
(CHASSIS)
452
(EDGE OF GLASS)
394.9
(ACTIVE AREA)
C
DETAIL
SCALE
1:1
C
SEE DETAIL
747.1
(CHASSIS)
REAR
SIDE
FRONT
SEE DETAIL
D
BOTTOM
USB TOUCHSCREEN OUTPUT
HDMI INPUT
(NOT AVAILABLE ON ALL MODELS)
OSD
VGA INPUT
DIMENSIONS ARE IN MILLIMETERS
AC POWER IN
DVI INPUT
(NOT AVAILABLE ON ALL MODELS)
DETAIL D
SCALE
1:1
SHEET 4
OF 6
MS601335
DATE: 03/02/16
REV: E
TITLE:
DIMENSIONAL DRAWING, 3243L
PCAP ONLY
INSTALLATION NOTES:
1. DURING HANDLING AND INSTALLATION, DO NOT REST WEIGHT
OF MONITOR ON EXPOSED TOUCHSCREEN EDGE. AVOID
EXCESSIVE PRESSURE OR SHARP IMPACTS ON TOUCHSCREEN EDGE.
DAMAGE TO TOUCHSCREEN AMY OCCUR.
2. MONITOR SHOULD BE MOUNTED WITH TOUCHSCREEN FLUSH
TO CUSTOMER KIOSK FRONT SURFACE(WITHIN
#0.3mm TOLERANCE).
3. KIOSK DESIGN SHOULD PROTECT TOUCHSCREEN EDGE TO AVOID
ACCIDENTAL DAMAGE DURING USE AND CLEANING.
M4 THREADS,
MAX SCREW DEPTH = 8MM
X8
28.4
75
400
75
SIDE MOUNT HORIZONTAL (TOP/BOTTOM)
28.4
400
M6 THREAD
MAX THREAD DEPTH = 10MM, X4
75
443
(SIDE MTG.
HOLES)
200
250
75
736.4
(SIDE MOUNTING HOLES)
VESA MOUNT PER MIS-F, 400,200, 6
DIMENSIONS ARE IN MILLIMETERS
M4 THREADS,
MAX SCREW DEPTH = 8MM
X8
SIDE MOUNT VERTICAL (LEFT/RIGHT)
SHEET 5
OF 6
MS601335
DATE: 03/02/16
REV: E
TITLE:
DIMENSIONAL DRAWING, 3243L
OPTIONAL PROJECTED CAPACITIVE FLUSHMOUNT KIT, P/N E312503
ORDER SEPARATELY, CUSTOMER ASSEMBLED
85
390
85
195
( 55 )
CUSTOMER PANEL THICKNESS:
1.3 MM TO
26.3MM
790.4
85
575
100
65
454.15
120
#0.5
130
240
260
748.79
425
#0.5
85
497
65
MOUNTING HOLES, 16X, FOR
REAR-ENTRY SCREWS:
1. IF CUSTOMER PANEL IS WOOD,
PILOT HOLES FOR 4MM WOOD SCREWS.
2. IF CUSTOMER PANEL IS METAL,
BLIND TAPPED M4 THREADED HOLES OR M4 STUDS.
MOUNTING HOLES, 16X, FOR
FRONT-ENTRY SCREWS:
CLEARANCE HOLES FOR M4
MACHINE SCREWS
4.5 , THRU, X16
M4 THREAD, X16
INSTALLATION INSTRUCTIONS:
1. ATTACH BRACKETS "A" TO TOUCHMONITOR WITH QTY 2 M4 HEX HEAD SCREWS
(INCLUDED), 8X
2.
ATTACH BRACKETS "B" TO TOUCHMONITOR WITH QTY 2 M4 HEX HEAD SCREWS
(INCLUDED), 8X
3.
ATTACH BRACKETS "C" LOOSELY TO TOUCHMONITOR WITH QTY 2 M4 HEAD HEAD SCREWS
4.
ADJUST DEPTH OF BRACKET "C" SUCH THAT FACE OF BRACKET SITS BELOW
SURFACE APPROXIMATELY THE SAME DISTANCE AS THE CUSTOMER PANEL THICKNESS.
SCREWS HOLDING BRACKET "C".
205
65
410
65
RECOMMENDED CUSTOMER PANEL CUTOUT
CUSTOMER PANEL
BRACKET C
(INCLUDED), 8X
TOUCHSCREEN
TIGHTEN
5.
INSTALL TOUCHMONITOR INTO CUSTOMER PANEL OPENING FROM BACK SIDE, TAKING
DAMAGE TOUCHSCREEN GLASS EDGE. CENTER TOUCHMONITOR IN OPENING USING SHIMS.
CARE NOT TO
6.
SECURE TOUCHMONITOR TO CUSTOMER PANEL USING CUSTOMER-SUPPLIED HARDWARE.
BRACKETS "C" IF GLASS IS NOT FLUSH TO CUSTOMER PANEL.
ADJUST
7.
SEAL GAP BETWEEN TOUCHSCREEN GLASS AND CUSTOMER PANEL USING SILICONE. MASK
TOUCHSCREEN SURFACE TO ENSURE NO SEALANT LEAKS ONTO FRONT OF GLASS.
OFF
BRACKET B
BRACKET A
BRACKET B
BRACKET C
(ADJUSTABLE)
BRACKET A
DIMENSIONS ARE IN MILLIMETERS
TOUCHSCREEN SURFACE
CAUTION: WHEN ASSEMBLED, THIS SURFACE}
SHOULD NOT PROTRUDE BEYOND CUSTOMER PANEL
SURFACE ANYWHERE AROUND PERIMETER OF SCREEN
CUSTOMER PANEL
SEAL PER NOTE 7
SHEET 6
OF 6
MS601335
DATE: 03/02/2016
REV: E