The Recognized Leader for
WATERSTOPS FOR CONCRETE
Concrete structures are only as watertight as the waterstops that
join them. Greenstreak waterstops stop leaks before they start...
in the joints of concrete structures.
Since 1950, Greenstreak has served the general and architectural
concrete construction industry. Innovation, engineering and
quality craftsmanship are combined to produce products of choice
for the industry’s owners, designers and contractors.
Greenstreak maintains its position of industry leadership by
responding to the unique needs of our customers. Greenstreak’s
dedicated technical and customer service staffs are active
participants in the concrete industry to take advantage of the
latest technological advances, communicate with our market
and analyze trends.
Centrally located, Greenstreak products are readily available
through a dedicated network of Concrete Forming and
Accessory Distributors both nationally and internationally.
Typical Structures Requiring Waterstops Include:
u Dams, locks, canals, water reservoirs and aqueducts
u Water and waste water treatment facilities
u Primary and secondary containment structures
u Culverts and tunnels
u Storage Tanks
u Retaining walls
Water Treatment Plant
u Bridge and deck abutments
u Foundations
u Slabs-on-grade
u Parking garages
3400 Tree Court Industrial Boulevard, St. Louis, Missouri 63122
Phone: 800-325-9504 or 636-225-9400
Fax: 800-551-5145 or 636-225-2049
Greenstreak.com
Flood Wall
Lock and Dam
C A L L G R E E N S T R E A K ’ S T E C H N I C A L S E R V I C E D E PA R T M E N T F O R A S S I S TA N C E W I T H
WATERSTOP BASIC USE
Embedded in concrete, across and/or along
the joint, waterstops form a watertight
diaphragm that prevents the passage of
fluid through the joint.
SUGGESTED WATERSTOP
DESIGN CHECKLIST
u Determine structure type
u Verify chemical containment
requirements (if any)
u Verify hydrostatic head pressure
requirements
u Determine joint type and joint
movement requirements
u Verify joinery details of dissimilar or
u
u
u
u
non-symmetrical waterstop profiles
(consider using one profile throughout
to simplify intersections)
Specify ribbed profile for best water
sealing performance
Specify type and size (by product
number, if possible)
Specify factory fabrications of intersections and heat welded field butt joints
Specify method for securing waterstop
in position (hog rings, grommets, etc.)
PVC WATERSTOP
u The industry standard
u Broadest design selection
u Formulated and compounded by
Greenstreak
u Manufactured by Greenstreak from
u
u
u
u
u
2
only prime resins and all virgin
raw materials
Great inherent elasticity
Resistant to many waterborne chemicals
Heat weldable
Will not discolor concrete or produce
electrolytic action
Suitable for above or below grade
applications
Physical properties
All Greenstreak PVC waterstops are specially
formulated and manufactured to meet or
exceed the industry’s standard specifications.
Greenstreak PVC Waterstop
Physical Properties
PROPERTY
Water absorption
Tear resistance
Ultimate Elongation
Tensile strength
Low temperature
brittleness
Stiffness in flexure
Specific gravity
Hardness Shore A15
Accelerated
extraction
• Tensile strength
• Elongation
Effect of Alkali
• weight change
• hardness change
TEST
*ASTM
*D570
*D624
*D638
*D638
*D746
*D747
*D792
*D2240
CRDC 572
NOMINAL
VALUE
0.02
225 lb./in.
360%
2000 psi min.
Passed @
-35°F / -37°C
700 psi
1.40
79±3
The following features are offered to
assist this method of installation:
Tie-Right - most PVC shapes are available with factory applied hog rings
Punched Flanges - most ribbed shapes
are available with punched flanges
Grommets - selected shapes are available with brass grommets
u
u
u
1850 psi
350%
+0.10%
+1 point
Note: Greenstreak conducts regular testing
of materials. Refer to Suggested Master
Specification for current values.
Independent laboratory tests are available
for the following applicable standards:
Corps of Engineers CRD-C572-74
Bureau of Reclamation C902
CH2M Hill
Montgomery Watson, Inc.
Various State Highway and/or Public
Works Department Standards
Installation aids for PVC waterstops
Greenstreak offers various features to
economically assist and promote proper
installation of PVC waterstops. Waterstops
must be securely positioned in the forms to
prevent deflection or misalignment during
concrete placement. This is achieved by
tethering the outer flanges of the waterstop
to the adjacent reinforcing steel.
u
u
u
u
u
Tie-Right, Grommeted, Punched Flanges
PVC Waterstop fabrications
PVC waterstop splices, directional changes
and intersections are critical components of
a quality installation. Specifications requiring factory made fabrications are strongly
recommended. Greenstreak can provide
homogeneous directional changes and
intersections, leaving only the less difficult
straight splices to be welded in the field.
SBR AND NEOPRENE
RUBBER WATERSTOPS
Greenstreak offers SBR and Neoprene
waterstops for applications requiring the
physical properties of rubber. These waterstops are manufactured to meet the Corps of
Engineers and The Bureau of Reclamation’s
specifications for rubber waterstops.
M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4
SWELLSTOP WATERSTOP
TM
Greenstreak Rubber Waterstop
Physical Properties
Property
Tensile Strength
(PSI min)
Tensile Strength @
300% Modulus
(PSI min)
Ultimate Elongation,
(% min)
Durometer, Shore A
(+/- 5)
Water Absorption,
7 Days
at 70°C % Weight
Change (% max)
Compression Set,
22 hr. @ 70°C
% of Original
Deflection (max)
Accelerated Aging,
96 hrs. @ 70°C
% of Tensile
Strength before
aging (min)
% of Elongation
before aging (min)
A flexible butyl rubber and swellable
clay waterproofing compound that swells
upon contact with water to form a long
lasting compression seal in non-moving
concrete joints.
Swellstop requires a 2" minimum clear
coverage from the face of the concrete.
*ASTM Styrene
High
Test Butadiene Tensile
Method (SBR) Neoprene**
*D412
2,500
2,500
*D412
1,150
1,150
*D412
450
450
See Hydrotite Catalog
*D2240
65
65
CRD
C575
5
15
*D395
30
30
(Method B)
*D572
Ozone Resistance,
7 Days at 50PPHM *D1149
@ 38°C, 20% Elong.
80
80
80
80
No
Cracks
No
Cracks
**Provides maximum resistance to ozone, sewage, oil and solvents
Rubber Fittings
Splices, directional changes and intersections are achieved with premolded unions,
fittings and a rubber adhesive kit.
HYDROTITE®
Hydrotite is a world renowned hydrophilic
waterstop. Composed of modified chloroprene rubber, Hydrotite expands up to 8
times its original volume when exposed
to water. This expansion creates an
effective compression seal within joints
of limited movement.
Hydrotite is used extensively in sealing
concrete construction and control joints,
pipe penetrations, precast concrete
segments, tunnel lining segments and
for repair of existing joints. Hydrotite
features include:
Volumetric expansion up to 8:1
Durable chloroprene rubber composition
Delay coating to protect fresh concrete
Composite profiles; controls direction
of expansion
Eliminates special form work
Installs quickly
Easy to splice
u
u
u
u
u
u
u
See Hydrotite Catalog
LEAKMASTER®
Leakmaster is a single component
hydrophilic urethane sealant/adhesive.
Expansion ratio of 2:1 makes Leakmaster
a natural choice in sealing irregular joints
and penetrations; as well as an aid in the
installation of Hydrotite profiles.
Applications include:
Foundation walls and slabs
Slabs-on-grade
Precast wall panels
Manholes
Pipe connections
Box culverts
Utility and burial vaults
Wet wells
Portable water tanks
u
u
u
u
u
u
u
u
u
LOCKSTOP WATERSTOP
TM
Similar in appearance to Swellstop, but
different in nature. Lockstop is a singlecomponent self-sealing mastic waterstop
which prevents moisture from penetrating
non-moving concrete joints.
Typical construction joint applications
include:
Foundation walls and slabs
Slabs-on-grade
Manholes
Pipe connections
Retaining walls
Tunnels
Culvert
Storage tanks
Note: Swellstop and Lockstop are for
non-working joints only.
u
u
u
u
u
u
u
u
3
C A L L G R E E N S T R E A K ’ S T E C H N I C A L S E R V I C E D E PA R T M E N T F O R A S S I S TA N C E W I T H
TYPES OF CONCRETE JOINTS
Contraction (Control) Joint
Contraction joints are designed planes of weakness to control the
location of cracks due to shrinkage of concrete.
Expansion (Isolation) Joint
Expansion joints separate or isolate abutting concrete structures
(walls, slabs, footings columns) protecting them from compressive
stresses that may develop due to thermal expansion, settlement,
creep, live load deflections, drying shrinkage or crush. Differential
movement at these joints can be both lateral and transverse.
Construction Joint
Construction joints are determined by interruptions in the placement of concrete.
WATERSTOPS FOR NON-WORKING JOINTS
Ribbed Flat
Construction or contraction
joints where little or no
movement is expected. Ribbed
shapes provide a better seal
than dumbbell shapes.
Dumbbell
Construction or contraction
joints where little or no
movement is expected.
Ideal for slab-on-grade joints
or walls which will be backfilled. Easy to form.
Base Seal
*Labyrinth
Primarily used in vertical joints
where little or no differential
movement is expected. Does
not require split forming and
adds a key to the joint. Difficult
to use in horizontal joints.
*Split Waterstop
Available in ribbed with centerbulb and dumbbell shapes.
Eliminates the need for split
form bulkhead.
Hydrotite
Used in joints of limited movement, Hydrotite expands with
water contact to create a compression seal. Installs quickly.
Swellstop
Used in precast and cast-inplace below grade applications.
Swellstop is intended for nonmoving joints only.
Lockstop
4
OR
Provides a watertight, mastic
bond to concrete surfaces in
non-moving joints.
WATERSTOPS FOR WORKING JOINTS
Ribbed with Centerbulb
The most versatile type of
waterstop available. The
centerbulb accommodates
lateral, transverse and
shear movement. Larger
centerbulbs accommodate
larger movements.
Dumbbell with Centerbulb
Accommodates lateral,
transverse and shear
movements. Ribbed
shapes provide better
sealing characteristics.
*Tear Web
Accommodates large
movements. Upon joint
movement the tear web
ruptures allowing the
U-bulb to deform without
putting the material
in tension.
RETROFIT APPLICATIONS
Retrofit System
Seals joints where
new construction
meets existing structure. Eliminates the
need to saw cut and
grout in a conventional waterstop.
Hydrotite/Leakmaster
Used in repair of
existing joints,
Hydrotite reduces
stress on sealants.
Also use where
joining new concrete
to existing and
little movement
is expected.
*Some directional changes or intersections may not be practical or possible with this style of waterstop. Consult Greenstreak’s
Technical Service Department for the suitability of this style waterstop for your specific application.
M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4
WATERSTOP PROFILES
profiles are available to meet the most demanding requirements.
Should your project require a special shape, GREENSTREAK
offers the world’s broadest line of waterstop sizes and profiles.
Custom orders will be considered. A Waterstop Profile supplement
illustrating all of the profiles is available upon request. For a copy,
call GREENSTREAK at (800)325-9504.
Once you have determined the joint type, the magnitude of the
differential movements and the type of waterstop to meet project
requirements, you must select a specific profile from the multitude
of shapes. The following are a few of the most commonly
specified profiles.
GREENSTREAK® waterstop is manufactured in widths from 4" to 12"
and in thicknesses from 1/8" to 1/2". Over 110 different sizes and
PVC SHAPES
Ribbed
646 STD. WT. 2.37 lbs/ft 3.53 Kg/m
HEAD PRESS. 175' 523 KPa
Montgomery – Watson
1/8"
3/8"
3.2mm
5/8"
9.5mm
15.9mm
Ribbed With Centerbulb
735 STD. WT. 2.45 lbs/ft 3.65 Kg/m HEAD PRESS. 175'
Ribbed With Centerbulb
523 KPa
CH2M-Hill Montgomery – Watson
1/8"
ID & 15/16" OD
1/2" 5/16"
8mm ID & 23.7mm OD
3/8" 1/8"
9.5mm 3.2mm 12.7mm
12.7mm ID & 25.4mm OD
9.5mm
1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa
STD. WT.
1/2" ID & 1" OD
3/8"
3.2mm
706
3/4"
19mm
9"
228.6mm
6"
9"
152.4mm
228.6mm
696
957
2.65 lbs/ft 3.94 Kg/m HEAD PRESS. 175' 523 KPa
STD. WT.
3/16"
STD. WT.
.984"
.137"
Grout 3.5mm
Ribs 3.5
.177" .275"
2525mm
4.5mm
4.5
1.986"
50
77mm
9.5mm
3
STD. WT.
0.74 lbs/ft 1.10 Kg/m HEAD PRESS. 65' 194 KPa
4.7mm
1/8"
3.2mm
4"
228.6mm
718
101.6mm
2.10 lbs/ft 3.13 Kg/m HEAD PRESS. 175' 523 KPa
STD. WT.
1/8"
3/4" ID & 1-1/4" OD
3/8"
1/4"
701
STD. WT.
3.2mm
19mm ID & 31.8mm OD
9.5mm
6.4mm
0.40 lbs/ft 0.60 Kg/m HEAD PRESS. 50' 149 KPa
3/16" 3/16" ID & 3/8" OD
4.7mm ID & 9.5mm OD
4.7mm
4"
9"
101.6mm
228.6mm
679
STD. WT.
CH2M-Hill
ID & 3/4" OD
3/16" 1/4"
6.4mm ID & 19mm OD
9"
Eyelet
250mm
702
6.4mm
.118" Brass
3mm
2.165"
55
9.842"
250 55mm
50mm
3/8"
4.8mm
1.75 lbs/ft 2.60 Kg/m HEAD PRESS. 150' 448 KPa
Bureau of Reclamation COE
7/8" ID & 1-1/2" OD
1/4"
22.2mm ID & 38.1mm OD
1.50 lbs/ft 2.23 Kg/m HEAD PRESS. 125' 373 KPa
Montgomery – Watson
1/8"
3/8"
3.2mm
5/8"
9.5mm
709
838
1.63 lbs/ft 2.43 Kg/m HEAD PRESS. 175' 523 KPa
STD. WT.
15.9mm
3/16" (1/4" opt.)
4.7mm
1/8"
1/4" ID & 3/4" OD
3/8"
1.10 lbs/ft 1.64 Kg/m HEAD PRESS. 150' 448 KPa
6.4mm ID & 12.7mm OD
13/64"
1/4" ID & 1/2" OD
3.2mm
6.4mm ID & 19mm OD
9.5mm
STD. WT.
5mm
6"
203mm
152.4mm
8"
9"
228.6mm
953
956
STD. WT.
.157" .236"
.787"
4mm
4
20mm
20
1.574"
40
40mm
25mm
25
Grout .137" .118" Brass
3 Eyelet
3.5 3mm
Ribs 3.5mm
6
6mm
17ID
ID.275"
.177" .669"
.984"
1.32 lbs/ft 1.96 Kg/m HEAD PRESS. 125' 373 KPa
4.5mm
4.5 17mm ID 77mm
.137"
.118" Brass
3.5mm
3.5
3mm
2.165"
1.968"
50
50mm
9.842"
250
1.574"
200
7.874"
712
1.77 lbs/ft 2.64 Kg/m HEAD PRESS. 150' 448 KPa
STD. WT.
Eyelet
STD. WT.
4.38 lbs/ft 6.52 Kg/m HEAD PRESS. 225' 672 KPa
1/2"
7/8"
1"
12.7mm ID & 31.8mm OD
25.4mm
12"
3
55
55mm
1/2" ID & 1-1/4" OD
12.7mm
22.2mm
304.8mm
250mm
40
40mm
732
200mm
STD. WT.
1.60 lbs/ft 2.38 Kg/m HEAD PRESS. 125' 373 KPa
713
STD. WT.
CH2M-Hill Montgomery – Watson
1/8"
3.2mm
3/8"
9.5mm
5/16" ID & 7/8" OD
8mm ID & 22.2mm OD
3.60 lbs/ft 5.36Kg/m HEAD PRESS. 225' 672 KPa
7/8" ID & 1-1/2" OD
1/2"
1/4"
3/16"
22.2mm ID & 38.1mm OD
12.7mm
6.4mm
4.7mm
5/8"
15.9mm
12"
786
STD. WT.
152.4mm
1/8"
3/8"
1/4"
3.2mm
9.5mm
6.4mm
304.8mm
6"
2.07 lbs/ft 3.08 Kg/m HEAD PRESS. 175' 523 KPa
705
STD. WT.
1.19 lbs/ft 1.77 Kg/m HEAD PRESS. 125' 373 KPa
Bureau of Reclamation
9"
3/16"
228.6mm
4.7mm
ID & 11/16" OD
3/8" 1/4"
6.4mm ID & 17.5mm OD
1/8"
738
STD. WT.
7/8"
22.2mm
2.73 lbs/ft 4.06 Kg/m HEAD PRESS. 150' 448 KPa
3/8"
7/8" ID & 1-3/8" OD
9.5mm
22.2mm ID & 34.9mm OD
9.5mm
3.2mm
9"
228.6mm
6"
152.4mm
783
STD. WT.
1.39 lbs/ft 2.07 Kg/m HEAD PRESS. 125' 373 KPa
1/8"
3.2mm
3/8"
9.5mm
703
STD. WT.
0.73 lbs/ft 1.09 Kg/m HEAD PRESS. 100' 299 KPa
1/4"
6.4mm
1/8"
3.2mm
6"
152.4mm
3/16"
4.7mm
731
STD. WT.
1.73 lbs/ft 2.58 Kg/m HEAD PRESS. 175' 523 KPa
1/2" ID x 7/8" OD
12.7 mm x 22.2 mm
1/4" ID & 5/8" OD
6.4mm ID & 15.9mm OD
1/8"
3.2mm
6"
152.4mm
3/8" 9.5mm
1/4"
9"
228.6 mm
5
C A L L G R E E N S T R E A K ’ S T E C H N I C A L S E R V I C E D E PA R T M E N T F O R A S S I S TA N C E W I T H
PVC SHAPES
Dumbbell
932 STD. WT. 2.67 lbs/ft 3.99 Kg/m
Base Seal
Split Flange
HEAD PRESS. 150' 448 KPa
Grout .393"
Ribs 10mm
727
STD. WT.
3/32"
5/8" OD
9.5mm
.984"
639
2.25 lbs/ft 3.35 Kg/m HEAD PRESS. 150' 448 KPa
3/8"
2.4mm
15.9mm OD
10
230
230mm
41.3mm
3.2mm
25
25mm
9.055"
1.07 lbs/ft 1.59 Kg/m HEAD PRESS. 100' 299 KPa
1-3/16"
1/2" 9/16"
12.7mm 14.3mm 1-5/8"
1/8" 30.2mm
STD. WT.
3/16"
9"
1/8"
4.7mm
228.6mm
3.2mm
6"
152.4mm
748
1.51 lbs/ft 2.25 Kg/m HEAD PRESS. 125' 373 KPa
STD. WT.
722
STD. WT.
3/8"
14.3mm
9"
2.18 lbs/ft 3.24 Kg/m HEAD PRESS. 150' 448 KPa
724
STD. WT.
771
3/8"
3/32"
3/4" OD
9.5mm
19mm
19mm
9"
228.6mm
3/16"
6"
9"
2.55 lbs/ft 3.79 Kg/m HEAD PRESS. 150' 448 KPa
723
STD. WT.
15.9mm OD
721
774
1.6mm
15.9mm
STD. WT.
6"
STD. WT.
9.5mm
17"
17"
431.8mm
6"
3/16"
152.4mm
STD. WT.
3/4"
19mm
4.7mm
2.20 lbs/ft 3.27 Kg/m HEAD PRESS. 150' 448 KPa
3/8"
3/8"
9.5mm
9.5mm
9"
3/8"
3/16"
228.6mm
4.7mm
Labyrinth
4"
NOT TO SCALE
Special Shapes
609 STD. WT. 2.92 lbs/ft. 4.35 Kg/m of Retrofit System
9.5mm
4.7mm
SlabSpan
431.8mm
9.5mm
0.47 lbs/ft 0.70 Kg/m HEAD PRESS. 65' 194 KPa
3/16"
2.75 lbs/ft 4.09 Kg/m
5/32"
5/32"
1.49 lbs/ft 2.22 Kg/m HEAD PRESS. 125' 373 KPa
3/4"
3/8"
3/8"
3/8"
152.4mm
STD. WT.
STD. WT.
9.5mm
760
Texas
Hwy.
Type B
177.8mm
777
0.71 lbs/ft 1.06Kg/m HEAD PRESS. 75' 224 KPa
4.7mm
11.1mm
3.9mm
3.9mm
19mm
3/16"
741
2.4mm
101.6mm
759
7/16"
7/16"
11.1mm
7"
4"
152.4mm
746
4.7mm
5/8"
6"
0.79 lbs/ft 1.18 Kg/m HEAD PRESS. 75' 224 KPa
1/8"
0.50 lbs/ft 0.74 Kg/m HEAD PRESS. 65' 194 KPa
1/16"
3/16"
3/32"
1.07 lbs/ft 1.60 Kg/m HEAD PRESS. 100' 299 KPa
6.4mm
STD. WT.
3.2mm
STD. WT.
Texas
Hwy.
Type A
228.6mm
6"
1/4"
3.9mm
9"
152.4mm
228.6mm
1.85 lbs/ft 2.75 Kg/m HEAD PRESS. 100' 299 KPa
5/32"
19mm
0.76 lbs/ft 1.13 Kg/m HEAD PRESS. 100' 299 KPa
3/32"
3/16"
5/8" OD
2.4mm
4.7mm
25.4mm
9"
STD. WT.
3/4"
1"
3/8"
772
4.7mm
152.4mm
9.5mm
STD. WT.
New York D
1.53 lbs/ft 2.28Kg/m HEAD PRESS. 100' 299 KPa
5/32"
3/4"
3.9mm
2.4mm
19mm
228.6mm
747
STD. WT.
1.54 lbs/ft 2.29 Kg/m HEAD PRESS. 125' 373 KPa
3/4"
3/8"
STD. WT.
152.4mm
228.6mm
9.5mm
752
0.83 lbs/ft 1.24 Kg/m HEAD PRESS. 100' 299 KPa
1/8"
3.2mm
9/16"
6"
152.4mm
STD. WT.
19mm OD
19mm
6"
751
STD. WT.
3/4" OD
9.5mm
4.7mm
3/4"
776
1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa
3/16"
3/8" 9.5mm
Available as a system:
• Waterstop
• S.S. Batten Bar
2 / ft. of waterstop
• S.S. Anchor Bolt
4.2 pcs. / ft. of
waterstop
• Epoxy Gel
101.6mm
789
Dumbbell With Centerbulb
936 STD. WT. 1.71 lbs/ft 2.54 Kg/m HEAD PRESS. 150'
.393"
.511" ID & .905 OD .196"
10mm
10
& 23 OD
13mm 13
ID ID
& 23mm
OD
.787"
20
20mm
5mm
5
STD. WT.
448 KPa
.098"
Brass
2.5mm
2.5 Eyelet
82.6mm
790
STD. WT.
1.24 lbs/ft 1.85 Kg/m HEAD PRESS. 50' 149 KPa
1-5/8"
3/16"
1"
41.3mm
4.7mm
3/4" ID &1-1/2" OD
3/8"
19mm ID & 38.1 OD
9.5mm
4-7/16"
112.7mm
Tear Web
698
0.78 lbs/ft 1.16 Kg/m HEAD PRESS. 65' 194 KPa
1/8"
3/4"
3/8"
3.2mm
9"
19mm
775
9.5mm
STD. WT.
2" ID & 2-3/4" OD
3/8"
23.7mm
50.8mm ID & 69.8mm OD
9.5mm
699
NEW STRUCTURE
6"
3/8" EXPANSION
ANCHOR BOLT
1/2"
1/4" x 2"
TYPE 304 SST
BATTEN BAR,
PREDRILLED
1/2"
SERRATED BASE
9"
228.6 mm
EXISTING STRUCTURE
STD. WT.
4.64 lbs/ft 6.91 Kg/m
9"
228.6mm
5°
19mm
152.4mm
3.70 lbs/ft 5.51 Kg/m HEAD PRESS. 150' 448 KPa
15/16"
9"
3/4"
6"
STD. WT.
REBAR
HOG RING
STD. WT.
228.6mm
754
STD. WT. 8.27 lbs/ft. 12.31 Kg/m of Retrofit System
Available as a system:
• Waterstop
• S.S. Batten Bar
20 ft. required
per 10 ft. section
Available predrilled
on 6" or 8" centers
• S.S. Anchor Bolt
6" predrilled bars require
36 per 10 ft. section
8" predrilled bars require
30 per 10 ft. section
3-1/4"
3.10 lbs/ft 4.61 Kg/m HEAD PRESS. 150' 448 KPa
25.4mm
667
41.3mm
4.7mm
10.236"
260
STD. WT.
1-5/8"
3/16"
260mm
753
0.84 lbs/ft 1.25 Kg/m HEAD PRESS. 10' 30 KPa
3-1/2"
1.00 lbs/ft 1.49 Kg/m HEAD PRESS. 100' 299 KPa
1/8"
3/4"
3.2mm
1/2"
19mm
88.9mm
12.7mm
3/8"
9.5mm
8"
203.2mm
9"
228.6mm
9"
228.6mm
756
STD. WT.
700
STD. WT.
STD. WT.
1.10 lbs/ft 1.64 Kg/m
3/4"
W1–2 Calif.
19mm
1.20 lbs/ft 1.79 Kg/m HEAD PRESS. 100' 299 KPa
3/8"
9.5mm
2-1/2"
3/4" ID & 1-1/8" OD
1/4"
19mm ID & 28.6 mm OD
6.3mm
3/8"
1-1/8"
63.5mm
28.6mm
9.5mm
6"
152.4mm
6
792
3.78 lbs/ft 5.63 Kg/m HEAD PRESS. 150' 448 KPa
1/8"
3/4"
3.2mm
1/8"
1/8"
3.2mm
3.2mm
19mm
9"
228.6mm
5-1/4"
133.4mm
3-1/8"
82.6mm
M AT E R I A L T Y P E A N D D E S I G N S E L E C T I O N ( 8 0 0 ) 3 2 5 - 9 5 0 4
RUBBER SHAPES
STRIP APPLIED
Neoprene Rubber
Styrene Butadiene Rubber (SBR)
See Hydrotite Catalog
918
902
Swellstop
594 STD. WT. 0.55 lbs/ft 0.81 Kg/m
STD. WT.
1.51 lbs/ft 2.25 Kg/m HEAD PRESS. 125' 373 KPa
3/8" 9.5mm
1.30 lbs/ft 1.93 Kg/m HEAD PRESS. 125' 373 KPa
STD. WT.
3/8" 9.5mm
3/4"
19mm
6"
3/4"
19mm
6"
152.4mm
3/4"
152.4mm
19mm
919
STD. WT.
2.20 lbs/ft 3.27 Kg/m HEAD PRESS. 150' 448 KPa
903
19mm
9.5mm
9"
9"
228.6mm
920
STD. WT.
228.6mm
1.22 lbs/ft 1.82 Kg/m HEAD PRESS. 100' 299 KPa
5/8"
1/4"
15.9mm
904
STD. WT.
15.9mm
19mm ID & 28.6 mm OD
1/4"
1"
25.4mm
152.4mm
2.90 lbs/ft 4.32 Kg/m HEAD PRESS. 150' 448 KPa
906
3/4" ID &1-1/2" OD
3/8"
19mm ID & 28.6 mm OD
3/4"19mm
6"
152.4mm
STD. WT.
3/8"
9.5mm
3/4" ID & 1-1/8" OD
6.3mm
6"
921
Swellstop II
596 STD. WT. 0.22 lbs/ft 0.33 Kg/m
1.05 lbs/ft 1.55 Kg/m HEAD PRESS. 100' 299 KPa
5/8"
3/4" ID & 1-1/8" OD
6.3mm
1" 25.4mm
3/4"
3/8"
19mm
9.5mm
1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa
STD. WT.
3/4"
3/8"
19mm ID & 38.1 OD
9.5mm
1"
STD. WT.
25.4mm
2.50 lbs/ft 3.70 Kg/m HEAD PRESS. 150' 448 KPa
1" 25.4mm
RUBBER FITTINGS
Rubber Fittings (Vertical and Flat)
PVC Intersections
Vertical Cross
19mm
228.6mm
PVC FABRICATIONS
Flat Cross
19mm ID & 38.1 OD
9"
228.6mm
Flat Tee
3/4"
3/4" ID &1-1/2" OD
3/8"
9.5mm
9"
Lockstop
595 STD. WT. 0.48 lbs/ft 0.71 Kg/m
Flat Ell
Vertical “T”
Vertical Cross
Vertical Ell
Union
Vertical Ell
Vertical Tee
Note: Adhesive available for bonding
rubber intersections (unions).
*Consult Greenstreak for special fabrications
your project may require
7
THE WORLD’S NUMBER ONE INJECTION HOSE SYSTEM
FUKO is a specially designed and patented solid core PVC Injection
Hose System which is installed in concrete joints to waterproof and
seal any cracks or voids in the joint area. The FUKO System seals
joints watertight and offers a complete maintenance program if
leakage appears in the future. When Portland Cement, Microfine
Cement, or Duroseal Injection Resins are selected, the FUKO System
can be used for multiple reinjections – a significant advantage over
any other hose system available.
A suitable injection material must be selected according to the
requirements of the joint. Two recommended injection materials
are summarized here. Please contact Greenstreak for additional
recommendations regarding injection materials.
FUKO Hose
Injection Material
Cross section of completed injection
DUROSEAL INJECT is a
solvent-free acrylate resin which
swells up to a factor of 1.5 on
contact with water. DUROSEAL
INJECT is a low viscosity resin
which penetrates microfine cracks
and capillaries to seal them
permanently. It is resistant to
acids, lyes and many solvents
and fuels. Equipment and tools used with DUROSEAL INJECT can be
easily cleaned with water.
LIMITED WARRANTY: GREENSTREAK warrants to the Buyer that this product will be free of defects and will perform as represented in writing subject to
the (2) following conditions:
First, the application of the product and the concrete construction practices used
in the application are in accordance with GREENSTREAK’S Recommendations.
Second, the Buyer has selected the proper product for the specific application
required. GREENSTREAK disclaims any responsibility for the selection of a particular waterstop product. Product selection is the sole responsibility and decision of the buyer. The suitability of any material for a specific application requiring fluid resistance is best determined by specific testing for the application.
GREENSTREAK urges the Buyer to conduct its own testing.
Any information supplied by GREENSTREAK with respect to its products is
believed to be correct. GREENSTREAK makes no representations or warranties,
express or implied, as to the accuracy or completeness of such information or
the use of such information for a particular purpose. GREENSTREAK has not
Printed in the U.S.A.
11/05
TRICODUR SI is a single component, suspension based microfine
cement which is ready for use. TRICODUR SI can be mixed at highspeed with water to form a cement
suspension with low viscosity and high
penetrating ability. The micro-fineness
of TRICODUR SI lets it penetrate into
microfine cracks (down to 0.05 mm)
and seals them reliably. The flow
properties of TRICODUR SI cement
suspension last up to 60 minutes.
performed any tests. Any test data has been prepared by independent commercial laboratories.
Because GREENSTEAK has no control over either the application or the selection of its products, GREENSTREAK’s Limited Warranty is as follows:
The exclusive remedies of the Buyer and the limit of the liability of
GREENSTREAK from any and all losses or damages resulting from
the use of this product (including claims based on contract, negligence, strict liability, or otherwise) shall be either the full refund of
the purchase price to Buyer of this product or the replacement of
the quantity of product purchased by the
Buyer - at the election of GREENSTREAK. In no event shall GREENSTREAK be liable for any incidental or consequential damages. The
Buyer and all users of this product are deemed to have accepted the
terms of this Limited Warranty which may not be varied in any way
by any verbal or written agreement.
3400 Tree Court Industrial Boulevard, St. Louis, Missouri 63122
Phone: 800-325-9504 or 636-225-9400
Fax: 800-551-5145 or 636-225-2049
Greenstreak.com
info@greenstreak.com