DATA SHEET F/BS9151 F0008 2PDT CRYSTAL CAN RELAY Formerly DEUTSCH LTD RELAY TYPE F Key Features • • • Hermetically Sealed BS9000 Approval Low Level to 3A Switching Wiring Schematic 3 1 b 22 a 2 21 23 Specification General Contact Arrangement Weight Mating Bases Performance Contact Rating/Life Mean Mechanical Life Operate Time Release Time Bounce Time 2 Pole changeover (2PDT) break before make. 15 g (mounting style 01) Solder Contacts – Order Part No. 4223-1 Crimp Contacts – Order Part No. 420204 3A resistive, 105 operations at 28 VDC 1A resistive, 105 operations at 115 VRMS 400 Hz 6 Low level10 operations (Typical, 5 VDC, 10mA) 7 5 x 10 Operations 3.5 ms max. nominal 5 ms max. (excluding bounce) 1 ms nominal 5 ms max. (excluding bounce) 3 ms max. o All measurements at 25 C and nominal voltage Environmental Linear Acceleration Bump Climatic Salt Mist -65oC to +125oC 490 m/s2 for 11 ms 60 to 2000 Hz at 196 m/s2 10 to 60 Hz at 1.5mm amplitude 2 980 m/s 4000 bumps at 390 m/s2, 6ms duration BS 2011 test Z/ABDM procedure 1 BS 2011 part 2.1 Kb severity 2 Ordering Information See sheet 4 Temperature Range Shock Vibration Data Sheet No DSF- 0904 SHEET 1 OF 4 Design authority and manufacture by Barnbrook Systems Limited Barnbrook Systems reserves the right to alter specifications and design without notice BARNBROOK SYSTEMS LIMITED, 25 FAREHAM PARK ROAD, HAMPSHIRE, PO15 6LD TEL NO: +44(0)1329 847722 FAX: +44(0)1329 844232 E-mail: sales@barnbrook.co.uk www.barnbrook.com Quality Approvals BS EN ISO 9001:2000 EASA Part 21 Subpart G UK.21G.2069 EASA Part 145 UK.145.01008 BCAR A8-8 CAA DA1/9289/90 Q 11271 RELAY DATA SHEET TYPE F Electrical Contact Resistance Code 01 contacts 50 mΩ max measured at open circuit voltage of 5 V and current of 10 mA Code 02 contacts 50 mΩ max measured at open circuit voltage of 10 mV and current of 10 mA 500 Mohms min – between any two isolated terminals 500 Mohms min – between terminals and case o Measured at 500 VDC and +25 C 1000 VRMS, 50 Hz, at sea level, between contacts and case and between the two sets of contacts 750 VRMS, 50 Hz, at sea level, between open contacts of a set and coil to case. 350 VRMS, 50 Hz, at 20 millibar air pressure, between all terminals and case. Closed contacts to case 3.7 pF Open contacts to case 2.0 pF Between contacts of a set 2.0 pF Between the two contact sets 3.5 pF The maximum operate power that can be applied to the coil is 1.5 W at +25oC de-rated linearly to 1.0 W at +125oC Insulation Resistance Voltage Proof Capacitance Coil Dissipation TERMINATION VARIANTS BS Ref 11 BS Ref 12 – 16 (see table) 5.60 4.30 3.30 2.50 Dim ‘X’ 0.85 0.71 10.16 0.85 0.71 Contrast bead Contrast bead 5.08 5.08 5.08 5.08 10.16 15.24 15.24 BS Ref 17 6.00 5.10 0.85 0.71 5.08 REF 12 13 14 15 16 Dim.X 4.55 - 5.60 2.90 - 3.40 7.50 - 8.30 24.00 - 26.00 74.00 - 78.00 Data Sheet No DSF- 0904 SHEET 2 OF 4 10.16 5.08 15.24 BARNBROOK SYSTEMS LIMITED, 25 FAREHAM PARK ROAD, HAMPSHIRE, PO15 6LD TEL NO: +44(0)1329 847722 FAX: +44(0)1329 844232 E-mail: sales@barnbrook.co.uk www.barnbrook.com Quality Approvals BS EN ISO 9001:2000 EASA Part 21 Subpart G UK.21G.2069 EASA Part 145 UK.145.01008 BCAR A8-8 CAA DA1/9289/90 Q 11271 DATA SHEET RELAY TYPE F MOUNTING VARIANTS BS Ref 02 BS Ref 01 20.60 max BS Ref 03 10.46 6.35 Dia 34.00 max 9.50 0.80 12.70 22.80 max 4.40 U.N.C. 2 holes 3.00 Dia 27.00 27.40 10.40 max 0.80 min BS Ref 04 BS Ref 05 BS Ref 06 18.37 18.11 0.50 min 6.40 6.05 3.17 0.50 min 2-56 UNC 2A thread 34.00 max 34.00 max 33.80 max 3.10 3.10 11.50 max 27.00 27.00 27.40 27.40 27 00 BS Ref 08 BS Ref 07 0.50 min 0.76 4.88 4.62 9.40 1.20 15.24 2.77 5.08 34.00 max 15.24 3.10 Data Sheet No DSF- 0904 27.00 27.40 SHEET 3 OF 4 F RELAY AND F0008 MOUNTING VARIANTS Mounting variant BS 01 02 03 2 Vibration level m/s 196 147 196 Equivalent non-BS Hooks RL7630 RL7633 RL7631 mounting variants Pins RL7641 RL9000 RL9004 2 Vibration level m/s 296* 147 196 * Body of relay must be rigidly mounted by epoxy cement etc. 04 196 RL11566 RL7643 196 05 196 RL7632 RL9003 196 06 196 RL43 245 07 196 RL14142 196 BARNBROOK SYSTEMS LIMITED, 25 FAREHAM PARK ROAD, HAMPSHIRE, PO15 6LD TEL NO: +44(0)1329 847722 FAX: +44(0)1329 844232 E-mail: sales@barnbrook.co.uk www.barnbrook.com 08 196 RL9809 196 Quality Approvals BS EN ISO 9001:2000 EASA Part 21 Subpart G UK.21G.2069 EASA Part 145 UK.145.01008 BCAR A8-8 CAA DA1/9289/90 Q 11271 DATA SHEET RELAY TYPE F ORDERING INFORMATION BS9151F0008- 01- 03- 05- 11 RL 7632 G41 Coil and Modification Code (Contact Barnbrook Sales) Represents combined Termination and Mounting variants (See Table Page 3) Termination Variant (Refer to Page 2) Mounting Variant (Refer to Page 3) Coil Variant (Refer to Table below) Contact Rating 01 = Light Duty 02 = Low level capacity COIL VARIANTS AND OPERATING CHARACTERISTICS Maximum volts DC Nominal Volts DC 7.2 6 Approximate inductance (henry’s) 0.03 0.6 14.4 12 0.20 Data Sheet No 14.4 1.2 32.0 24 0.70 DSF- 0904 2450 28.3 2.4 57.6 48 2.50 975 19.2 1.6 38.4 32 0.95 01 Resistance ohms +/10% 35 Must Operate volts DC 3.6 Must Release volts DC 0.3 02 200 7.2 03 675 04 05 BS Reference BARNBROOK SYSTEMS LIMITED, 25 FAREHAM PARK ROAD, HAMPSHIRE, PO15 6LD TEL NO: +44(0)1329 847722 FAX: +44(0)1329 844232 E-mail: sales@barnbrook.co.uk www.barnbrook.com SHEET 4 OF 4 Quality Approvals BS EN ISO 9001:2000 EASA Part 21 Subpart G UK.21G.2069 EASA Part 145 UK.145.01008 BCAR A8-8 CAA DA1/9289/90 Q 11271