Deutsche Akkreditierungsstelle GmbH
Annex to the Accreditation Certificate D-PL-14169-03-03
according to DIN EN ISO/IEC 17025:2005
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
Holder of certificate:
TÜV Rheinland LGA Products GmbH
At the locations
Am Grauen Stein, 51105 Köln
Tillystraße 2, 90431 Nürnberg
Maximilianallee 4, 04129 Leipzig
Tests in the fields:
Physical, physiochemical, chemical and microbiological investigations of water; microbiological,
chemical and sensory investigations according to the ordinance on drinking water
(Trinkwasserverordnung); sampling of untreated and drinking water; physical, textile,
physiochemical, chemical and microbiological investigations of varnishes, plastics, leather,
textiles, paper, wood and consumer products which come into contact with foodstuffs,
consumer goods which come into contact with skin, furniture, toys, cosmetics, washing and
cleaning products; personal protective equipment (PPE) pursuant to directive 89/686/EWG for
the processes and products listed in the annex to this certificate; testing of designs and patterns
in the context of awarding the GS symbol according to the product safety act for the following
products: toys and PPE; toys pursuant to directive 2009/48/EC for the processes and products
listed in the annex to this certificate; mechanical test on toys; investigations on the migration
behavior and selected sensory tests on consumer goods; selected physiochemical and chemical
tests on material samples, construction and other materials, steel, iron, non-ferrous metal
materials, candles, solid fuels; test chamber investigations; analytical definition of airborne
hazardous materials in emissions and emissions as well as in interior spaces; definition of
microbiological contents in indoor areas; analysis of dangerous substances at the work place
Abbreviations used: see last page
This document is a translation. The definitive version is the original German annex to the accreditation certificate.
1/90
Annex to the accreditation certificate D-PL-14169-03-03
The testing methods are designated with the following symbols for the locations
where they are carried out:
C = Cologne, N = Nürnberg, L = Leipzig
The laboratory is permitted to
1) freely select the standardized or equivalent testing methods
2) modify, further develop or redevelop testing methods
3) use the standard testing methods listed here with different standards issued
within the testing areas marked *, without prior information or consent from DAkkS.
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
2/90
Annex to the accreditation certificate D-PL-14169-03-03
Table of contents
1
Water investigations *3) ......................................................................................................... 6
1.1
Sampling ............................................................................................................................... 6
1.2
Physical and physiochemical parameters .............................................................................. 6
1.3
Anions................................................................................................................................... 7
1.4
Cations.................................................................................................................................. 8
1.5
Commonly detected material ................................................................................................ 8
1.6
Summary effect and material parameters ............................................................................. 9
1.7
Individual components and gaseous components ................................................................. 9
1.8
Microbiological water investigation .....................................................................................10
2
Investigation of drinking water according to the ordinance on drinking water
2.1
Sampling ..............................................................................................................................11
2.2
Appendix 1: Microbiological parameter................................................................................11
2.3
Appendix 2: Chemical parameter .........................................................................................12
2.4
Appendix 3: Indicator parameters ........................................................................................16
2.5
Parameters which are not contained in annexes 1 to 3 of the ordinance on drinking water
2001 ....................................................................................................................................19
3
Gas chromatographic method for technical products and their migrates (textiles, leather,
wood, plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing and
cleaning products) to determine contaminates, additives and monomer residue .................20
3.1
Sample preparation*1) 2)........................................................................................................20
3.2
Gas chromatographic basic standards *1) 2)............................................................................20
3.3
Exemplary, implementing standards *1) ................................................................................21
3.4
Exemplary gas chromatographic in-house methods .............................................................25
4
Liquid chromatographic method for technical products and their migrates (textiles, leather,
wood, plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing and
cleaning products) to determine contaminates, additives and monomer residue .................26
4.1
Sample preparation*1) 2)........................................................................................................26
4.2
Liquid chromatographic basic standards *1) 2) .......................................................................27
4.3
Exemplary implementing standards *1) .................................................................................27
4.4
Exemplary liquid chromatographic in-house method ...........................................................31
5
Ion chromatographic method for technical products and their migrates (textiles, leather,
wood, plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing and
cleaning products) to determine contaminates, additives and monomer residue*3) ..............32
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
*3)
.................11
3/90
Annex to the accreditation certificate D-PL-14169-03-03
5.1
Ion chromatographic standards............................................................................................32
5.2
Ion chromatographic in-house method ................................................................................32
6
6.1
Spectroscopic method for technical products and their migrates (textiles, leather, wood,
plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing and
cleaning products) to determine contaminates, additives and monomer residue
33
*1) 2)
Sample preparation
.......................................................................................................33
6.2
Spectropic basic standards*1) 2) .............................................................................................34
6.3
Exemplary implementing spectropic standards
7
Photometric method for technical products and their migrates (textiles, leather, wood,
plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing and
cleaning products) *1) 3) .........................................................................................................37
7.1
Sample preparation .............................................................................................................37
7.2
Photometric standards .........................................................................................................37
8
Gravimetric method for technical products and their migrates (textiles, leather, wood,
plastic, polymers, varnishes, dyes consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing and
cleaning products)*1) 3) ..........................................................................................................39
8.1
Sample preparation .............................................................................................................39
8.2
Gravimetric standards ..........................................................................................................40
9
Potentiometric, titrimetric method for technical products and their migrates (textiles,
leather, wood, plastic, polymers, varnishes, dyes consumer products which come into
contact with foodstuff, consumer products which come into contact with skin, cosmetics,
washing and cleaning products)*1) 3) .....................................................................................42
9.1
Potentiometric, titrimetric standards ...................................................................................42
9.2
Potentiometric, titrimetric in-house method ........................................................................42
10
Visual method for technical products and their migrates (textiles, leather, wood, plastic,
polymers, lacquer, colors, consumer products which come into contact with foodstuff,
consumer products which come into contact with skin, cosmetics, washing and cleaning
products)*1) 3)........................................................................................................................43
11
Sensory method for technical products (paper, wood, plastic, polymer, varnishes, dyes,
consumer products with which contact foodstuff, water carrying components) *1) 3) ............44
12
Elementary analyses *1) 3) ......................................................................................................45
12.1
Standards.............................................................................................................................45
12.2
In-house method .................................................................................................................45
13
Investigation of metallic materials or metals and alloys *3)....................................................45
13.1
Sample preparation .............................................................................................................45
13.2
Quantifying standards ..........................................................................................................46
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
*1)
...............................................................34
- Translation -
4/90
Annex to the accreditation certificate D-PL-14169-03-03
14
Investigation of construction and other materials *3) ............................................................47
15
Candle testing *3) ..................................................................................................................49
16
Determination of organic substances in construction and other materials *3) .......................49
17
Test chamber investigations*3) .............................................................................................50
18
Analytical determination of airborne hazardous material *3) ................................................53
18.1
Emissions and imissions .......................................................................................................53
18.1.1
Emission measurement (analytics) .......................................................................................53
18.1.2
Imissions measurements (analytics) .....................................................................................55
18.2
Indoor measurements..........................................................................................................57
18.2.1
Analytical determination of particle and gaseous air polluting materials in indoor air ..........57
18.2.2
Determination of microbiological contents in indoor rooms .................................................58
18.2.3
Analytics of hazardous materials in the work place ..............................................................58
19
Microbiological investigations *3) Cultural bacteriological and mycological method,
microbiological test systems for the investigation of consumer products and cosmetic
products ..............................................................................................................................61
19.1
Microbiological investigation of consumer products and other solid materials, antimicrobial
effectiveness........................................................................................................................61
19.2
Microbiological investigation of cosmetic products and toys containing water .....................63
20
Technical investigations on textiles, leather, plastics and personal protective equipment ....63
20.1
General*3).............................................................................................................................63
20.2
Directive 89/686/EWG (PSA directive)..................................................................................79
20.3
Testing of samples in the context of the awarding the GS symbol according to the product
safety act for personal protective equipment (PPE) ..............................................................83
21
Mechanical-physical toy testing ...........................................................................................83
21.1
Safety tests*3) .......................................................................................................................83
21.2
Directive 2009/48/EG (Toy directive) ...................................................................................87
21.3
Testing of samples in the scope of the awarding the GS symbol according to the product
safety act for toys ................................................................................................................89
22
Abbreviations used ..............................................................................................................90
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
5/90
Annex to the accreditation certificate D-PL-14169-03-03
1
Water investigations
1.1
Sampling
*3)
DIN EN ISO 5667-1 (A 4)
2007-04
Water quality
Sampling
Part 1: Instructions for establishing sampling programs
and sampling techniques
N
DIN EN ISO 5667-3 (A 21)
2013-03
Water quality
Sampling
Part 3: Conservation and handling water samples
N
DIN ISO 5667-5 (A 14)
2011-02
Water quality - sampling - part 5: Instructions for
sampling drinking water from treatment plants and
pipe network systems
N
DIN EN ISO 19458 (K 19)
2006-12
Water quality
Sampling for microbiological investigations
N
1.2
Physical and physiochemical parameters
DIN EN ISO 7887
2012-04
Water quality
Investigating and determining the coloration
N
DIN EN ISO 7027 (C 2)
2000-04
Water quality
Determining the opacity
N
DIN 38404-C 3
2005-07
Determining absorption in the area of UV rays, spectral
absorption co-efficient
N
DIN 38404-C 4
1976-12
Determining the temperature
C, N
DIN EN ISO 10523
2012-04
Water quality - Determining the pH value
C, N
DIN 38404-C 6
1984-05
Determining the redox voltage
N
DIN EN 27888 (C 8)
1993-11
Water quality
Determining the electrical conductivity
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
6/90
Annex to the accreditation certificate D-PL-14169-03-03
DEV B 1/2
1971
Test for odor and taste
C, N
DIN EN 1622
2006-10
Water quality
Determining the odor threshold (TON) and taste
threshold (TFN)
N
DIN 38405-D 1
1985-12
Determination of chloride ions
N
DIN 38405-D 4
1985-07
Determination of fluoride
N
DIN EN 26777 (D 10)
1993-04
Water quality
Determination of nitrite
Spectrometric method
N
DIN EN ISO 10304-1 (D 20)
2009-07
Water quality
Determination of dissolved anions using liquid ion
chromatography
Part 1: Determination of bromide, chloride, fluoride,
nitrate, nitrite, phosphate and sulfate
Photometric determination of chromium (VI) using 1.5diphenycarbazide
N
DIN EN ISO 10304-3
1997-11
Water quality - Determination of the dissolved anions
using ion chromatography - part 3: Determination of
chromate, iodide, sulfate, thiocyanate and thiosulfate
(restriction: only chromate)
N
DIN 38405-D 26
1989-04
Photometric determination of dissolved sulfide
N
DIN 38405-D 27
1992-07
Determination of readily purgeable sulfide
N
1.3
Anions
DIN 38405-D 24
1987-05
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
7/90
Annex to the accreditation certificate D-PL-14169-03-03
1.4
Cations
DIN 38406-E 5
1983-10
Determination of ammonia nitrogen
C, N
DIN EN ISO 11885 (E 22)
2009-09
Water quality
Determination of selected elements through inductive
coupled plasma atom emission spectrometry
(ICP-OES)
C, N
DIN EN ISO 17294-2 (E 29)
2005-02
Water quality
Application of inductive coupled plasma atom mass
spectrometry) (ICP-MS)
Part 2: Determining 62 elements
C, N
1.5
Commonly detected material
DIN 38407-F 2
1993-02
Gas chromatographic determination of semi-volatile
halogen hydrocarbon
N
DIN EN ISO 10301 (F 4)
1997-08
Water quality
Determination semi-volatile halogenized hydrocarbon
Gas chromatographic method
N
DIN 38407-F 8
1995-10
Determination of 6 polycyclic aromatic hydrocarbons
(PAH) in water using high-performance liquid
chromatography (HPLC)
N
DIN EN ISO 17993 (F18)
2004-03
Water quality
Determination of 15 polycyclic aromatic hydrocarbons
(PAH) in water using HPLC with fluorescence detection
after liquid-liquid extraction
N
DIN 38407-F 9
1991-05
Determination of benzene and some derivatives using
gas chromatography
N
DIN EN ISO 11369 (F 12)
1997-11
Water quality
Determination of selected plant protection agents
method with high resolution liquid chromatography
with UV detection after solid-liquid extraction
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
8/90
Annex to the accreditation certificate D-PL-14169-03-03
1.6
Summary effect and material parameters
DIN 38409-H 1
1987-01
Determination of the total dry residue, the filtrate dry
residue and the ash residue
C, N
DIN 38409-H 2
1987-03
Determination of the material and ash residue which
can be removed by filtering
C, N
DIN EN ISO 8467 (H 5)
1995-05
Water quality
Determination of the permanganate index
N
DIN 38409-H 6
1986-01
Water hardness
N
DIN 38409-H 7
2005-12
Determination of the acid and base capacity
N
DIN 38409-H 9
1980-07
Determination of the percentage volume of detectable
material in water and sewage
C, N
DIN EN ISO 9562 (H 14)
2005-02
Water quality
Determination of adsorbable organic bound halogens
(AOX)
N
DIN 38409-H 16
1984-06
Determination of the phenol index
C, N
DIN ISO 15705
2003-01
Determination of the chemical oxygen required
(ST-CSB)
Cell test
N
1.7
Individual components and gaseous components
DIN EN ISO 7393-2
2000-04
Water quality
Determination of free chloride and total chloride
Part 2: Colorimetric method with N,
N-Diethyl-1,4-Phenylendiamine for routine checks
N
DIN EN ISO 5814 (G 22)
2013-02
Water quality
Determination of the dissolved oxygen
Electrochemical method
N
DIN 38408-G 5
1990-06
Determination of chlorine dioxide
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
9/90
Annex to the accreditation certificate D-PL-14169-03-03
1.8
Microbiological water investigation
ENV ISO 13843 (K2)
2001-12
Water quality
Guidelines on validating the microbiological method
N
DIN EN ISO 6222 (K 5)
1999-07
Water quality
Quantitative determination of cultivatable microorganisms
Determination of the colony count through injection
into agar culture medium
N
DIN EN ISO 16266 (K 11)
2008-05
Water quality
Detecting and counting pseudomonas aeruginosa
through membrane filtration
N
DIN EN ISO 7899-2 (K 15)
2000-11
Water quality
Detecting and counting intestinal enterococci Part 2:
Membrane filtration method
N
Trinkwasserverordnung
05.12.1990
Quantitative determination of cultivatable microorganisms - determining the colony count through
injection into agar culture medium
(colony count at 20°C and 36°C)
N
Trinkwasserverordnung
21.05.2001
Detection of clostridium perfringens using membrane
filtration (mCP method) at
44 + 1°C for 21 + 3 hours.
N
Colilert-18/Quanti-Tray
2001
Detection of Escherichia coli and coli shaped germs with N
ready-to-use reagents
ISO 11731-2
2004-05
Water quality
Detecting and counting of legionella
Part 2: Direct membrane filtration method with low
bacteria count
Gesundheitsblatt (Health
Gazette)
2000-11
Detection of legionella in drinking water and bathing
N
water
Recommendation of the Federal Environmental Office
(Umweltbundesamtes) after hearing of the drinking and
bathing water commission (Trink- und
Badewasserkommission)
UBA Recommendation
20.08.2012
Systematic investigations of drinking water installations N
for legionella according to the ordinance on drinking
water - sampling, investigation process and information
about the results
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
10/90
Annex to the accreditation certificate D-PL-14169-03-03
2
Investigation of drinking water according to the ordinance on drinking water1
2.1
Sampling
Method
DIN EN ISO 5667-1 (A4)
2007-04
DIN EN ISO 5667-3 (A21)
2013-03
DIN ISO 5667-5 (A14)
2011-02
DIN EN ISO 19458 (K19)
2006-12
2.2
*3)
Title
Location
Water quality - sampling
Part 1: Instructions for establishing sampling
programs and sampling techniques
Water quality - sampling
Part 3: Conservation and handling water samples
Water quality - sampling
Part 5: Instructions on sampling drinking water from
treatment plants and pipe network systems
Water quality - sampling for microbiological
investigations
N
N
N
N
Appendix 1: Microbiological parameter
Part I: General requirements on drinking water
Ser. No.
1
2
1
Parameter
Escherichia coli (E. coli)
Enterococcus
Method
Colilert-18/Quanti-Tray©; 2001
Detection of Escherichia coli and coli-shaped
germs through ready-to-use reagents
DIN EN ISO 7899-2 (K 15); 2000-11
Water quality
Detection and counting of intestinal
enterococcus
Part 2: Membrane filtration method
Location
N
N
This accreditation does not replace the recognition and approval process of the relevant authorities according
to legislator's demands.
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
11/90
Annex to the accreditation certificate D-PL-14169-03-03
Part II: Drinking water requirements which is intended for delivery in closed containers
Ser. No.
Method
Colilert-18/Quanti-Tray©; 2001
Escherichia coli (E. coli)
Detection of Escherichia coli and coli-shaped
germs through ready-to-use reagents
DIN EN ISO 7899-2 (K 15); 2000-11
Water quality
Enterococcus
Detecting and counting of intestinal
enterococcus
Part 2: Membrane filtration method
DIN EN ISO 16266 (K 11); 2008-05
Water quality
Pseudomonas aeroginosa
Detection and counting of pseudomonas
aeruginosa through membrane filtration
1
2
3
2.3
Parameter
Location
N
N
N
Appendix 2: Chemical parameter
Part I: Chemical parameter, the concentration of which generally does not increase in a
distribution network including drinking water installation
Ser. No.
Parameter
1
Acrylamide
2
Benzene
3
Boron
4
Bromate
Method
Not documented
DIN 38407-F9, 1991-05
Determining benzene and some derivatives
with gas chromatography
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectrometry (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
Not documented
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
Location
N
C, N
C, N
12/90
Annex to the accreditation certificate D-PL-14169-03-03
5
Chromium
6
Cyanide
7
8
9
10
11
12
1,2 dichlorethane
Fluoride
Nitrate
Pesticide Materials and biocidal
product materials
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectrometry (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
Not documented
DIN EN ISO 10301 (F4); 1997-08
Water quality
Determination of semi-volatile halogenized
hydrocarbon (LHKW) gas chromatographic
method
DIN EN ISO 10304-1 (D20); 2009-07
Water quality
Determination of dissolved anions using liquid
ion chromatography
Part 1: Determination of bromide, chloride,
fluoride, nitrate, nitrite, phosphate and sulfate
DIN EN ISO 10304-1 (D20); 2009-07
Water quality
Determination of dissolved anions using liquid
ion chromatography
Part 1: Determination of bromide, chloride,
fluoride, nitrate, nitrite, phosphate and sulfate
DIN EN ISO 11369 (F12); 1997-11
Water quality - Determination of selected plant
protection product method with highresolution liquid chromatography with UV
detection after solid-fluid extraction
Pesticide Materials and biocidal Not documented
product materials in total
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Mercury
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
C, N
N
N
N
N
C, N
13/90
Annex to the accreditation certificate D-PL-14169-03-03
13
14
15
Selenium
Tetrachlorethene and
Trichlorethene
Uranium
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectrometry (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 10301 (F4); 1997-08
Water quality
Determination of semi-volatile halogenized
hydrocarbons (LHKW) Gas chromatographic
method
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectrometry (ICP-MS)
Part 2: Determination of 62 elements
C, N
N
N
Part II: Chemical parameter with a concentration which can increase in the distribution network
including in the drinking water installation
Ser. No.
1
2
Parameter
Antimony
Arsenic
Method
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
Location
C, N
C, N
C, N
C, N
14/90
Annex to the accreditation certificate D-PL-14169-03-03
3
4
Benzo-(a)-pyrene
Lead
5
Cadmium
6
Epichlorhydrine
7
Copper
8
Nickel
DIN EN ISO 17993 (F18), 2004-03
Water quality
Determination of 15 polycyclic aromatic
hydrocarbons (PAH) in water through HPLC
with fluorescence detection after fluid-fluid
extraction
DIN 38047-F8; 1995-10
Determination of 15 polycyclic aromatic
hydrocarbons (PAH) in water through high
performance liquid chromatography HPLC with
fluorescence detection
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
Not documented
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
DIN EN ISO 17294-2 (E 29); 2005-02
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
N
C, N
C, N
C, N
C, N
C, N
C, N
C, N
15/90
Annex to the accreditation certificate D-PL-14169-03-03
9
Nitrite
Polycyclic
hydrocarbons
10
aromatic
11
Trihalogenmethane
12
Vinylchloride
2.4
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
DIN EN 26777 (D10); 1993-04
Water quality
Determination of nitrite; spectrometric
method
DIN EN ISO 17993 (F18), 2004-03
Water quality
Determination of 15 polycyclic aromatic
hydrocarbons (PAH) in water through HPLC
with fluorescence detection after liquid-liquid
extraction
DIN EN ISO 10301 (F4); 1997-08
Water quality
Determination of semi-volatile halogenized
hydrocarbons (LHKW) Gas chromatographic
method
Not documented
C, N
N
N
N
Appendix 3: Indicator parameters
Part I: General indicator parameters
Ser. No.
1
Parameter
Aluminum
Method
DIN EN ISO 17294-2 (E 29); 2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
Location
C, N
C, N
16/90
Annex to the accreditation certificate D-PL-14169-03-03
2
3
4
5
Ammonium
Chloride
Clostridium perfringens
(including spores)
Coli-shaped bacteria
6
Iron
7
Coloring (spectral
absorption coefficient Hg
436 nm)
8
Odor
9
Taste
10
11
Colony count at 22°C
Colony count at 36°C
12
Electrical conductivity
13
Manganese
DIN 38406-E5; 1983-10
Determination of ammonium nitrogen
DIN EN ISO 10304-1 (D20); 2009-07
Water quality
Determination of dissolved anions using
liquid-ion chromatography
Part 1: Determination of bromide, chloride,
fluoride, nitrate, nitrite, phosphate and sulfate
TrinkwV 2001 (2011) annex 5 I e)
Detection of clostridium perfringens using
membrane filtration (mCP method) at 44 + 1°C
for 21 + 3 hours
Colilert-18/Quanti-Tray©; 2001
Detection of Escherichia coli and coli-shaped
bacteria using ready-to-use reagents
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
DIN EN ISO 7887 (C 1-2); 1994-12 (2012-04)
Water quality
Investigation and determination of coloring
DEV B 1/2 Part a; 1971
Test for odor and taste
DEV B 1/2 Part a; 1971
Test for odor and taste
TrinwV 2001 (2011) annex. 5 I d) bb)
Quantitative determination of the cultivatable
micro-organisms
Determination of the colony count through
injection in a agar culture medium (colony
count at 20°C and 36°C)
TrinwV 2001 (2011) annex. 5 I d) bb)
N
N
N
N
C, N
N
N
N
N
N
Quantitative determination of the cultivatable
micro-organisms
Determination of the colony count through
injection in a agar culture medium (colony
count at 20°C and 36°C)
DIN EN 27888 (C 8); 1993-11
Water quality
Determination of the electrical conductivity
DIN EN ISO 17294-2 (E 29); 2005-02
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
C, N
17/90
Annex to the accreditation certificate D-PL-14169-03-03
14
Sodium
15
Organically bound
carbon (TOC)
16
Oxydizability
17
Sulfate
18
Opacity
19
Hydrogen ion
concentration
20
Calcite solubility
21
22
Tritium
Total indicative dose
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through
inductive coupled plasma atom emission
spectrometry (ICP-OES)
C, N
C, N
Not documented
DIN EN ISO 8467 (H5); 1995-05
Water quality
Determination of the permanganate index
DIN EN ISO 10304-1 (D20); 2009-07
Water quality
Determination of dissolved anions using
liquid-ion chromatography
Part 1: Determination of bromide, chloride,
fluoride, nitrate, nitrite, phosphate and sulfate
DIN EN ISO 7027 (C2); 2000-04
Water quality - determination of the opacity
DIN EN ISO 10523 (C5); 2012-04
Water quality - determination of the pH value
DIN 38404-C10; 2012-12
Water quality - calculation of the calcite
saturation of the water
Not documented
Not documented
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
N
N
C, N
N
18/90
Annex to the accreditation certificate D-PL-14169-03-03
Part II: Special requirements on drinking water in the annexes of the drinking water installation
Parameter
Method
Location
ISO 11731; 1998-05
Water quality
Detection and count of legionella
Legionella spec.
2.5
N
N
DIN EN ISO 11731-2 (K22), 2008-06
water quality - Detection and count of legionella
Part 2: Direct membrane filtration method with low
bacteria count
UBA recommendation 20.08.2012
Systematic investigations of drinking water installations
for legionella according to the ordinance on drinking
water
N
Parameters which are not contained in annexes 1 to 3 of the ordinance on drinking
water 2001
Parameter
Calcium
Potassium
Magnesium
Acid capacity
Method
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through inductive
coupled plasma atom emission spectrometry (ICP-OES)
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through inductive
coupled plasma atom emission spectrometry (ICP-OES)
DIN EN ISO 11885 (E 22); 2009-09
Water quality
Determination of selected elements through inductive
coupled plasma atom emission spectrometry (ICP-OES)
DIN 38409-H7; 2005-12
Determination of the acid and base capacity
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
Location
C, N
C, N
C, N
N
19/90
Annex to the accreditation certificate D-PL-14169-03-03
3
Gas chromatographic method for technical products and their migrates (textiles,
leather, wood, plastic, polymers, varnishes, dyes, consumer products which come into
contact with foodstuff, consumer products which come into contact with skin,
cosmetics, washing and cleaning products) to determine contaminates, additives and
monomer residue
3.1
Sample preparation*1) 2)
EPA Method 3500C
2007-02
Organic Extraction and Sample Preparation
C, N
EPA Method 3540C
1996-12
Soxhlet Extraction
C, N
EPA Method 3550C
2007-02
Ultrasonic Extraction
C, N
EPA Method 3600C
1996-12
Cleanup
C, N
DIN EN 71-10
2006-03
Toy safety - Part 10: Organic-chemical connections sample preparation and extraction
C, N
DIN EN 1186 ff
2002
Active agents and products in contact with foodstuffs plastics - migration method
C, N
3.2
Gas chromatographic basic standards *1) 2)
EPA Method 8260B
1996-12
Volatile Organic Compounds by Gas
Chromatography/Mass Spectrometry (GC/MS)
C, N
EPA Method 8270D
2007-02
Semi-volatile Organic Compounds by Gas
Chromatography/Mass Spectrometry (GC/MS)
C, N
EPA Method 8015C
2007-02
Nonhalogenated Organics by Gas Chromatography
C, N
EPA Method 8121
1994-09
Chlorinated Hydrocarbons by Gas Chromatography:
Capillary Column Technique
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
20/90
Annex to the accreditation certificate D-PL-14169-03-03
3.3
Exemplary, implementing standards *1)
DIN EN ISO 14362-1
2003-12
Textiles
Method for determining aromatic amines from azoic
dye
Part 1: Usage list of certain azoic dyes without prior
extraction
(corresponds to BVL B 82.02-2, 2004-06)
C, N
DIN EN ISO 14362-2
2003-12
Textiles
Method for determining aromatic amines from azoic
dye
Part 2: Usage list of certain azoic dyes by extracting
fibers
(corresponds to BVL B 82.02-4, 2013-01)
C, N
BVL-B-82.02-4
2013-01
Investigation of consumer products - method for
C, N
determining certain aromatic amines from azoic dyes in
textiles; - Part 2: Usage list of certain azoic dyestuffs by
extracting fibers (adoption of the German standard
DIN EN 14362-2, December 2003 edition)
DIN EN ISO 14362-1
2012-04
Textiles - method for determining certain aromatic
amines from azoic dyestuffs - Part 1: Detection of the
use of certain azoic dyestuffs with and without
extracting fibers
BVL-B-82.02-2
2013-01
Investigation of consumer products - method for
C, N
determining certain aromatic amines from azoic dyes in
textiles - Part 1: Detection of the use of certain azoic
dyestuffs with and without extracting fibers (adoption
of the German standard DIN EN 14362 Part 1,
April 2012 edition)
DIN EN ISO 14362-3
2012-09
Textiles - method for determining certain aromatic
amines from azoic dyestuffs - Part 3: Detection of the
use of certain azoic dyestuffs which could release 4aminoazobenzene
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
C, N
21/90
Annex to the accreditation certificate D-PL-14169-03-03
BVL-B-82.02-15
2013-01
Investigation of consumer products - method for
C, N
determining certain aromatic amines from azoic dyes in
textiles - Part 3: Detection of the use of certain azoic
dyestuffs with and without extracting fibers (adoption
of the German standard DIN EN 14362 Part 3,
September 2012 edition)
DIN EN ISO 17234-1
2010-06
Leather
C, N
Chemical tests
Determination of certain azoic dyestuffs in dyed leather
- Part 1: Detection of certain aromatic amines from
azoic dyestuffs
DIN EN ISO 17234-2
2011-06
Leather
Chemical tests
Determination of certain azoic dyestuffs in colored
leather - Part 2: Determination of 4-aminoazobenzene
(corresponds to BVL B 82.02-3 2014-02)
BVL B 82.02-9
2014-02
Determination of certain azoic dyestuffs in dyed leather C, N
– Part 2: Determination of 4-aminoazobenzene
DIN EN ISO 17070
2007-01
Leather
Chemical tests
Determination of the content of pentachlorophenol
(modification: alkaline extraction)
C, N
BVL B 82.02-8
2001-06
Investigation of consumer products
Detection and determination of pentachlorophenol in
consumer products, in particular those made from
leather and textiles (reference method)
(modification: alkaline extraction)
C, N
DIN 54232
2010-08
Textiles - Determination of the content of connections
on the basis of chlorobenzene and chlortoluene
C, N
DIN 38407-F 2
1993-02
Gas chromatographic determination of semi-volatile
halogen hydrocarbons
(modification for material tests: Extraction with nhexane)
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
22/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 18856
2005-11
Water quality
Determination of selected phthalates using gas
chromatography / mass spectrometry
(modification for material tests: Extraction with MTBE)
C, N
BVL B 80.68-1 (EG)
1981-11
Determination of monomer acrylonitrile in polymers
N
DIN EN 71-3
2013-07
Toy safety - Part 3: Migration of certain elements
Section 9.3 Organozinc
(Metals: see sections 5 and 6)
(including DIN EN 71-3/A1:2014-06 (draft))
C, N
DIN EN 71-11
2006-01
Toy safety
Part 11: Organic-chemical connections analytical
method
Sections:
5.4 Primary aromatic amines
5.5 Monomers and solvents
5.6 Wood preservatives
5.8 Softeners
(Further parameter groups: see section 4)
N
DIN EN ISO 17353
2005-11
Water quality
Determination of selected organozinc connections
Method using gas chromatography
(Deviation for material tests: Extraction with methanol
KOH-solution)
C, N
CPSC-CH-C1001-09.3
2010-04
Standard Operating Procedure for Determination of
Phthalates; April 1st, 2010
(where necessary using extraction method EPA 3550C
for non PVC material)
C, N
BVL B 80.32-1 (EG)
1981-11
Determination of the content of vinyl chloride
monomer in consumer products
N
BVL B 80.56-2
2004-06
Determination of 1,3-Dichlor-2-propanol and
3-Monochlor-1,2-propandiol in water extracts from
paper, carton board and cardboard
inc. amendment 2004-09
C
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
23/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 62321/
VDE 0042-1
2009-12
Products in electro technology
C, N
Determination of components of the six contents (lead,
mercury, cadmium, hexavalent chromium, polybromised biphenyl, poly-bromised diphenylether)
which are subject to a restriction (IEC 62321:2008)
(here: poly-bromised diphenylether)
ZEK 01.4-08
2011-11
Harmonized method to determine polycyclic aromatic
hydrocarbons (PAH) in plastic samples, gaschromatographic method with detection using mass
spectrometry
C, N
BVL K 84.00-8
1982-11
Determination of methanol in relation to ethanol or
propanol-2
C
(Deviation: Using a capillary column)
DIN CEN ISO/TS 16186
2012-12
Shoes - Possible critical substances in shoes and shoe
components - test method for quantitative
determination of dimethylfumarate (DMFU) in
footwear
C
DIN CEN ISO/TS 16189
2013-07
Shoes - Possible critical substances in shoes and shoe
components - test method for quantitative
determination of dimethylfumarate in footwear
C, N
CEN ISO/TS 16181
2011-07
Shoes - Possible critical substances in shoes and shoe
components - test method for quantitative
determination of phthalates in footwear
C, N
DIN EN 1186-4
2002-07
Materials and products in contact with foodstuff plastics - Part 4: Test method for overall migration in
olive oil using cells when filling the product
C, N
DIN EN 1186-8
2002-07
Materials and products in contact with foodstuff plastics - Part 8: Test method for
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
24/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 13130-3
2004-08
Materials and products in contact with foodstuff substances in plastics which are subject to restrictions
N
Part 3: Determination of acrylonitrile in foodstuffs and
test foodstuffs
(corresponds to BVL B 80.30-21, 2008-10)
DIN EN 13130-4
2004-08
Materials and products in contact with foodstuff substances in plastics which are subject to restrictions
N
Part 4: Determination of 1,3-butadiene in plastics
(corresponds to BVL B 80 30-22, 2008-10)
DIN CEN/TS 13130-16
2005-05
Materials and products in contact with foodstuff substances in plastics which are subject to restrictions
C, N
Part 16: Determination of caprolactam and caprolactam
salt in test foodstuff
BVL L 00.00-4
1982-05
Determination of monomer acrylonitrile in (test)
foodstuff
N
BVL L 00.00-3 (EC)
2014-02
Determination of consumer goods in vinyl cholride
transferred to foodstuffs
N
DIN EN 15308
Characterization of waste - Determination of selected
polychlorized biphenyls (PCB) in solid waste using
capillary gas chromatography with electron capture
detection or mass spectrometry detection
C, N
2008-05
3.4
Exemplary gas chromatographic in-house methods
QAA-SL-N-2033
Determination of chlorophenols and phenols in wood
and material samples using GC-MS
N
QAA-SL-K-2020
Determination of allergenic fragrances in cosmetics
using GC-MS
C
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
25/90
Annex to the accreditation certificate D-PL-14169-03-03
QAA-SL-K-2034
Determination of nonylphenol and octylphenol in
different matrices using GC-MS in compliance with DIN
EN ISO 18857-1
C, N
QAA-SL-K-2023
Determination of hydrocarbons from mineral oil or
plastics in paper and packaging material according to
the BFR method using GC/FID and/or GC/MS
(MOSH/MOAH)
C
QAA-SL-K-2007
Gas chromatographic determination of chloroparafin in C
solids using GC/MS NCI in SCAN mode
4
Liquid chromatographic method for technical products and their migrates (textiles,
leather, wood, plastic, polymers, varnishes, dyes, consumer products which come into
contact with foodstuff, consumer products which come into contact with skin,
cosmetics, washing and cleaning products) to determine contaminates, additives and
monomer residue
4.1
Sample preparation*1) 2)
EPA Method 3500C
2007-02
Organic Extraction and Sample Preparation
C, N
EPA Method 3540C
1996-12
Soxhlet Extraction
C, N
EPA Method 3550C
2007-02
Ultrasonic Extraction
C, N
EPA Method 3600C
1996-12
Cleanup
C, N
DIN EN 71-10
2006-03
Toy safety - Part 10: Organic-chemical connections sample preparation and extraction
C, N
DIN EN 1186 ff
2002
Active agents and products in contact with foodstuffs plastics - migration method
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
26/90
Annex to the accreditation certificate D-PL-14169-03-03
4.2
Liquid chromatographic basic standards *1) 2)
EPA Method 8321B
2007-02
Solvent Extractable Nonvolatile Compounds by High
Performance Liquid
Chromatography/Thermospray/Mass Spectrometry
(HPLC/TS/MS) or Ultraviolet (UV) Detection
C, N
Pharm Eur. 2.2.29
2008
Liquid chromatography
C, N
4.3
Exemplary implementing standards *1)
DIN EN ISO 14362-1
2003-12
Textiles
Method for determining aromatic amines from azoic
dyes
Part 1: Usage list of certain azoic dyes without prior
extraction
(corresponds to BVL B 82.02-2, 2004-06)
C, N
DIN EN ISO 14362-2
2003-12
Textiles
Method for determining aromatic amines from azoic
dyes
Part 2: Usage list of certain azoic dyes through the
extraction of fibers
(corresponds to BVL B 82.02-4, 2013-01)
C, N
BVL-B-82.02-4
2013-01
Investigation of consumer products - method for
C, N
determining certain aromatic amines from azoic dyes in
textiles - Part 2: Usage list of certain azoic dyes through
the extraction of fibers (adoption of the German
standard DIN EN 14362-2, December 2003 edition)
BVL K 84.00-28
2014-02
Investigation of cosmetic products - screening and
quantitative determination of 10 UV filters in sun
protection products - HPLC method
N
DIN EN ISO 14362-1
2012-04
Textiles - Method for determining certain aromatic
amines from azoic dyestuff - Part 1: Detection of the
use of certain azoic dyestuffs with and without
extracting fibers
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
27/90
Annex to the accreditation certificate D-PL-14169-03-03
BVL-B-82.02-2
2013-01
Investigation of consumer products - method for
C, N
determining certain aromatic amines from azoic dyes in
textiles - Part 1: Detection of the use of certain azoic
dyes with and without extracting fibers (taken from the
German standard DIN EN 14362 Part 1, April 2012
edition)
DIN EN ISO 14362-3
2012-09
Textiles - Method for determining certain aromatic
C, N
amines from azoic dyes - Part 3: Detection of the use of
certain azoic dyes which could release 4aminoazobenzene
BVL-B-82.02-15
2013-01
Investigation of consumer products - method for
determining certain aromatic amines from azoic
dyestuff in textiles - Part 3: Detection of the use of
certain azoic dyes which could release 4aminoazobenzene (adopted from the standard
DIN EN 14362 Part 3, September 2012 edition)
DIN EN ISO 17234-1
2010-06
Leather
C, N
Chemical tests
Determination of certain azoic dyestuff in dyed leather Part 1: Determination of certain aromatic amines from
azoic dyestuff
DIN EN ISO 17234-2
2011-06
Leather
C, N
Chemical tests
Determination of certain azoic dyestuff in dyed leather Leather - Part 2: Determination of 4-aminoazobenzene
(corresponds to BVL B 82.02-3 2014-02)
BVL B 82.02-9
2014-02
Determination of certain azoic dyestuff in dyed leather - C, N
Leather - Part 2: Determination of 4-aminoazobenzene
DIN EN ISO 17226-1
2008-08
Leather
Chemical tests
Part 1: Determination of formaldehyde content in
leather through high-performance liquid
chromatography
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
C, N
28/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN 54231
2005-11
Textiles
Detection of dispersion dyestuffs
(corresponds to BVL B 82.02-10, 2007-10)
Modification: Dispersion to further dyestuff including
carcinogenic dyestuff
C, N
BVL K 84.00-7 (EG)
1991-09
Investigation of cosmetic products
Detection and quantitative determination of free
formaldehyde
N
BVL K 84.00-23 (EG)
1995-10
Investigation of cosmetic products
Detection and determination of benzoic acid, 4hydroxybenzoic acid, sorbic acid, salycyclic acid and
propoinic acid in cosmetic products
N
BVL K 84.00-24 (EG)
1996-11
Investigation of cosmetic products
Detection and determination of 2-phenoxyethanol,
1-Phenoxypropane-2-ol, methyl-, ethyl, propyl,
butyl- and benzyl-4-hydroxybenzoate in cosmetic
products
N
DIN EN 71-11
2006-01
Toy safety
Part 11: Organic-chemical connections
Analysis method
Sections:
5.2 Flame retardants
5.3 Dyestuff
5.4 Primary aromatic amines (protection)
5.5 Monomers and solutions
5.7 Preservatives
(further parameter groups: see section 3)
N
DIN EN 71-7
2014-07
Toy safety
N
Part 7: Finger paints
Requirements and test method,
Paragraph 4.2: Dye products
Paragraph 4.3: Preservatives
4.5.1 Primary aromatic amines
4.6 Scent and taste (analytics of bitter substances using
HPLC-MS-MS)
4.9 N-nitrosamines
DIN EN 71-12
2013-07
Toy safety - Part 12: N-nitrosamine and
N-nitrosable substances
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
29/90
Annex to the accreditation certificate D-PL-14169-03-03
CEN/TS 15968
2010-08
Determination of extractable perfluoroctansulfate
N
(PFOS) in layered and impregnated solid substance
articles, liquids and fire extinguishing foams - method
for sampling, extraction and analysis using LC-MS or LCMS/MS
ISO 15819
2008-06
Cosmetics
Analytical method
Nitrosamine: Detection and determination of
N-Nitrosodiethanolamine (NDELA) in cosmetics using
HPLC-MS/MS
N
DIN EN 13130-2
2004-08
Materials and products in contact with foodstuff,
substances in plastics which are subject to restrictions
Part 2: Determination of terephthal acid in test
foodstuff (corresponds to BVL B 80.30-20, 2008-10)
N
DIN EN 13130-8
2004-08
Materials and products in contact with foodstuff
Substances in plastics which are subject to restrictions
Part 8: Determination of isocyanates in test foodstuff
(corresponds to BVL B 80.30-26, 2008-10)
N
DIN CEN/TS 13130-13
2005-05
Materials and products in contact with foodstuff
Substances in plastics which are subject to restrictions
Part 13: Determination of 2,2-bis(4-hydroxyphenyl)
propane (bisphenol A) in plastics
N
DIN CEN/TS 13130-20
2005-05
Materials and products in contact with foodstuff
Substances in plastics which are subject to restrictions
Part 20: Determination of epichlorhydrine in plastics
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
30/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN CEN/TS 13130-23
2005-05
Materials and products in contact with foodstuff
Substances in plastics which are subject to restrictions
Part 23: Determination of formaldehyde and
hexamethylentetramine in test foodstuff
C, N
DIN CEN/TS 13130-18
2005-05
Materials and products in contact with foodstuff
Substances in plastics which are subject to restrictions
Part 18: Determination of 1,2-dihydroxybenzene,
1,3- dihydroxybenzene, 1,4- dihydroxybenzene,
4,4-dihydroxybenzene-phenon and 4,4dihydroxybiphenyl in test foodstuff
N
4.4
Exemplary liquid chromatographic in-house method
AA-QCPR-307_14
Determination of isocyanates in the air and material
samples using HPLC (MPP method)
N
QAA-SL-KN-3021
Alkylphenolethoxylate in extracts from material
samples using LC-MS/MS
C, N
QAA-SL-KN-3022
Determination of primary aromatic amines in watery
test foodstuff using LC-MS/MS
C, N
QAA-SL-K-2011
Gas chromatographic determination of flame
retardants in solid substances using GC-MS
C, N
QAA-SL-N-3031
Determination of MIT, CIT, BIT and phenol in toys and
cosmetic products using LC-DAD/MS
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
31/90
Annex to the accreditation certificate D-PL-14169-03-03
5
Ion chromatographic method for technical products and their migrates (textiles, leather,
wood, plastic, polymers, varnishes, dyes, consumer products which come into contact
with foodstuff, consumer products which come into contact with skin, cosmetics,
washing and cleaning products) to determine contaminates, additives and monomer
residue*3)
5.1
Ion chromatographic standards
DIN EN 71-3
2013-07
5.2
Toy safety; migration of certain elements
para. 9.2 Chromium (III) and chromium (VI)
(including DIN EN 71-3/A1:2014-06 (draft))
N
Ion chromatographic in-house method
QAA-SL-KN-4316
Determination of chromium VI in different matrices (for C, N
example, leather, migrates from toys) using ion
chromatography with inline concentration and
postcolumn derivatization
In connection with:
DIN EN ISO 10304-3 Water quality - Determination of the
1997-11
dissolved anions using ion
chromatography - Part 3: Determination of
chromate, iodide, sulfate, thiocyanate and
thiosulfate (restriction: only chromate)
QAA-SL-N-1007
Wickbold digestion Determination of halogens
N
In connection with:
DIN EN ISO 10304-1
2009-07
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
Water quality - Determination of the
dissolved anions using ion
chromatography - Part 1: Determination
of bromide, chloride, fluoride, nitrate,
nitrite, phosphate and sulfate
- Translation -
32/90
Annex to the accreditation certificate D-PL-14169-03-03
6
Spectroscopic method for technical products and their migrates (textiles, leather, wood,
plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing
and cleaning products) to determine contaminates, additives and monomer residue
6.1
Sample preparation *1) 2)
EPA 3005A
1992-07
Acid Digestion of Waters for Total Recoverable or
Dissolved Metals for Analysis by FLAA or ICP
Spectroscopy
C, N
EPA 3010A
1992-07
Acid Digestion of Aqueous Samples and Extracts for
Total Metals for Analysis by FLAA or ICP Spectroscopy
C, N
EPA 301A
2007-02
Microwave Assisted Acid Digestion of Aqueous Samples C, N
and Extracts
EPA 3050B
1996-12
Acid Digestion of Sediments, Sludges, and Soils
C, N
EPA 3051A
2007-02
Microwave Assisted Acid Digestion of Sediments,
Sludges, Soils, and Oils
C, N
EPA 3052
1996-12
Microwave Assisted Acid Digestion of Siliceous and
Organically Based Matrices
C, N
DIN EN 12472
2006-03
Simulated abrasion and corrosion test for the detection C, N
of nickel emissions from coated products
DIN EN 12873-1
2004-04
Influence of materials on drinking water
Influence as a result of migration Part 1: Test method
for non-metallic products and non-cement bonded
products manufactured in a factory
N
DIN EN 12873-1
2012-07 (draft)
Influence of materials on drinking water
Influence as a result of migration - Part 1: Test method
for products manufactured in a factory from vitreous
materials (enamel/enameling); German version prEN
12873-1:2012 (exception: enamel tests)
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
33/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN 38414-S 4
1984-10
Determination of elutriation with water
N
DIN ISO 11466
1997-06
Extraction in aqua regia soluble trace elements
N
6.2
Spectropic basic standards*1) 2)
EPA 6010C
2007-02
Inductively Coupled Plasma-Atomic Emission
Spectrometry
C, N
EPA 6020A
2007-02
Inductively Coupled Plasma-Mass Spectrometry
C, N
DIN EN ISO 11885 (E 22)
2009-09
Water quality
Determination of selected elements through inductive
coupled plasma atom emission spectrometry (ICP-OES)
C, N
DIN EN ISO 17294-2 (E 29)
2005-02
Water quality
Application of inductive coupled plasma mass
spectrometry (ICP-MS)
Part 2: Determination of 62 elements
C, N
6.3
Exemplary implementing spectropic standards
*1)
DIN EN 1811
2011-05
Reference test method to determine all rods which are
fed into punctured body parts and products which
come in direct contact with skin for a long period
C, N
BVL B 82.02-6
2013-01
Investigation of consumer products - reference test
method to determine the release of nickel from
products which come in direct contact with skin for a
long period (adpoting the standard DIN EN 1811,
October 2012 edition)
C, N
DIN EN 71-3
2002-11
Toy safety; elements intended for migration
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
34/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 71-3
2013-07
Toy safety - Part 3: Elements intended for migration
(see also the section 'Metals', including
Cr (VI)-Screening)
(Including DIN EN 71-3/A1:2014-06 (draft))
C, N
DIN EN 71-7
Paragraph 4.4
2014-07
Toy safety
Part 7: Finger paints
Requirements and test method, paragraph 4.4
Elements intended for migration
N
DIN EN 1122
2002-02
Plastic
Determination of cadmium
Wet digestion method
C
DIN EN 16128
2011-05
Reference test method to determine the release of
C, N
nickel in those parts of glasses frames and sunglasses
which are intended to come into direct contact with the
skin for a long period
BVL B 82.02-14
2013-01
Investigation of consumer products - reference test
C, N
method to determine the release of nickel on those
parts of glasses lenses and sunglasses which are
intended to come into direct contact with the skin for a
long period (adopting the standard DIN EN 16128,
May 2011 edition)
DIN EN 1388-1
1995-11
Active agents and products in contact with foodstuff
Silicate surface
Part 1: Determination of lead and cadmium emissions
from ceramic products
(corresponds to BVL B 80.03-3, 2008-10)
C, N
DIN EN 1388-2
1995-11
Active agents and products in contact with foodstuff
Silicate surface
Part 2: Determination of lead and cadmium emissions
from silicate surfaces, except ceramic products
(corresponds to BVL B 80.03-4, 2008-10)
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
35/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 62321/
VDE 0042-1
2009-12
Products in electro technology
Determination of the components of the six contents
(lead, mercury, cadmium, hexavalent chromium, polybromised biphenyl, poly-bromised diphenylether)
which are subject to a restriction
(IEC 62321:2008)
C, N
ASTM F 963-11
2011
Standard Consumer Safety Specification for
Toy Safety
part 8.3 Method to dissolve soluble matter
C, N
CPSC-CH-E1003-09.1
2011-02
Standard Operating Procedure for Determining Lead
(Pb) in Paint and Other Similar Surface Coatings
C, N
CPSC-CH-E1001-08.3
2012-11
Standard Operating Procedure for Determining Total
Lead (Pb) in Metal Children’s Products (including
Children’s Metal Jewelry), Revision
CN
CPSC-CH-E1002-08.3
2012-11
Standard Operating Procedure for Determining Total
Lead (Pb) in Non-Metal Children´s Products
C, N
ASTM F 2923
2011
Standard Specification for Consumer Product Safety for C N
Children’s Jewelry
ISO 6486-1
1999-12
Ceramic and glass ceramic products and glassware in
contact with foodstuff
Lead and cadmium emissions
Part 1: Test method
C, N
DIN EN 601
2004-07
Aluminum and aluminum alloys - castings chemical
composition of castings which come into direct contact
with foodstuff
C, N
DIN 51032
1986-02
Ceramic, glass, glass ceramic, enamel - threshold for
lead and cadmium emissions from consumer products
C, N
BVL B 80.32-2 (EG)
1990-06
Determination of zinc migration into cooking fat and oil N
from consumer products (hard PVC)
DIN EN ISO 17072-1
2011-06
Leather - Chemical determination of the metal content
Part 1: Extractable metals
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
36/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 17072-2
2011-06
Leather - Chemical determination of the metal content
Part 2: Overall metal content
C, N
DIN 54233-3
2010-02
Textile testing - determination of metals Part 3: Determination of extractable metals with acidic
synthetic sweat solution
C, N
DIN 54233-4
2014-07
Textile testing - determination of metals Part 4: Determination of extractable metals with
synthetic saliva solution
C, N
DIN EN 13346 (S 7)
2001-04
Determination of trace elements and phosphorus
extraction method with aqua regia
C, N
7
Photometric method for technical products and their migrates (textiles, leather, wood,
plastic, polymers, varnishes, dyes, consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing
and cleaning products) *1) 3)
7.1
Sample preparation
DIN EN 645
1994-01
Paper and cardboard intended for contact with
foodstuff
Manufacture of a cold water extract
C, N
DIN EN 647
1994-01
Paper and cardboard intended for contact with
foodstuff
Manufacture of a hot water extract
C, N
BVL B 82.02-1
1985-06
Investigation of consumer products
Determination of formaldehyde emissions from textile
consumer products
C, N
DIN EN ISO 14184-1
2011-12
Textiles
Determination of the content of formaldehyde
Water extraction method
C, N
DIN EN ISO 14184-2
2011-12
Textiles
Determination of the content of formaldehyde
Water vapor absorption method
C, N
7.2
Photometric standards
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
37/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 17226-2
2009-09
Leather - chemical determination of the formaldehyde
content - Part 2: Colorimetric analysis
C, N
DIN EN 120
2011-11
Wooden composite
Determination of the content of formaldehyde
Extraction method named perforator method
C
DIN EN 717-3
1996-05
Wooden composite
C, N
Determination of formaldehyde emissions
Part 3: Formaldehyde emissions according to the bottle
method
VdL-RL 03
1997-05
Guidelines for determining the concentration of
formaldehyde in water-thinnable dispersion dyes and
related products
VDA 275
1994-07
Molded parts for vehicle interior
C
Determination of formaldehyde emissions
Measurement method according to the modified bottle
method
EN 1541
2001-04
Paper and cardboard intended for contact with
foodstuff
Determination of formaldehyde in a watery extract
C, N
BVL K 84.00-7, Abs. 4
1991-09
Formaldehyde
Determination of the overall amount through
colorimetry with acetyl acetone
C
DIN EN ISO 17075
2008-02
Leather
Chemical tests
Determination of the chromium(VI) content
C
BVL B 82.02-11
2008-10
Detection of chromium (VI) in consumer products made C
from leather: photometric method
DIN EN ISO 17895
2005-06
Coating materials
Determination of the content of volatile organic
connections in water-thinnable dispersion dyes (In-can
VOC)
C
BVL L 00.00-6
1995-01
Investigation of foodstuffs
Determination of primary aromatic amines in watery
test foodstuff
inc. amendment 2002-12
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C
38/90
Annex to the accreditation certificate D-PL-14169-03-03
8
Gravimetric method for technical products and their migrates (textiles, leather, wood,
plastic, polymers, varnishes, dyes consumer products which come into contact with
foodstuff, consumer products which come into contact with skin, cosmetics, washing
and cleaning products)*1) 3)
8.1
Sample preparation
BVL B 80.30-1 (EG)
1998-01
Investigation of consumer products
Basic regulations for determining migration
C, N
BVL B 80.30-2 (EG)
2008-03
Investigation of consumer products
List of simulants
C, N
BVL B 80.30-3 (EG)
2008-03
Investigation of consumer products
Further instructions for testing compliance with
migration values
C, N
DIN EN 1186-1
2002-07
Materials and products in contact with foodstuff
Plastic
Part 1: Guidelines for selecting the testing conditions
and test method for the migration
(corresponds to BVL B 80.30-4, 2008-10)
C, N
DIN EN 13130-1
2004-08
Materials and products in contact with foodstuff
Substances in plastics which are subject to restrictions
Part 1: Guidelines for selecting the test method for the
specific migration of substances from plastics in
foodstuff and test foodstuff, the determination of
substances in plastics and the selection of contact
conditions for test foodstuff
(corresponds to BVL B 80.30-19, 2008-10)
C, N
DIN EN 12873-1
2004-04
Influence of materials on drinking water as a result of
the migration
Part 1: Test method for non-metallic and non-cement
bonded products manufactured in a factory
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
39/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 12873-1
2012-07 (draft)
Influence of materials on drinking water - influence as a N
result of migration - Part 1: Test method for products
manufactured in the factory from or with organic or
vitreous materials (enamel/enameling); German version
prEN 12873-1:2012 (exception: Enamel tests)
DIN EN 12880 (S 2a)
2001-02
Determination of the water content and the dry residue C, N
or dry substance
DIN EN 12879 (S 3a)
2001-02
Determination of the ash residue and the ash loss of
the dry mass of sludge
C, N
DIN EN 1186-3
2002-07
Materials and products in contact with foodstuff
Plastic
Part 3: Test method for the overall migration in watery
test foodstuff through total immersion
(corresponds to BVL B 80.30-6, 2008-10)
C, N
DIN EN 1186-5
2002-07
Materials and products in contact with foodstuff
C, N
Plastic
- Part 5: Test method for the overall migration in watery
test foodstuff using cells (corresponds to BVL B 80.30-8,
2008-10)
DIN EN 1186-7
2002-07
Materials and products in contact with foodstuff
Plastic
Part 7: Test method for the overall migration in watery
test foodstuff using a bag (corresponds to BVL B 80.3010, 2008-10)
DIN EN 1186-9
2002-07
Materials and products in contact with foodstuff
C, N
Plastic
Part 9: Test method for the overall migration in watery
test foodstuff by filling the product (corresponds to BVL
B 80.30-12, 2008-10)
8.2
Gravimetric standards
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
40/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 1186-12
2002-07
Materials and products in contact with foodstuff
Plastic
- Part 12: Test method for overall migration at low
temperatures
(without migration in oil)
N
DIN EN 1186-14
2002-12
Materials and products in contact with foodstuff
Plastic
Part 14: Test method for 'replacement tests' for the
overall migration from plastics which are intended for
contact with foodstuff using isooctane and 95 %
ethanol
(corresponds to BVL B 80.30-17, 2008-10)
C, N
DIN EN 1186-15
2002-12
Materials and products in contact with foodstuff
Plastic
Part 15: Alternative test method to determine the
migration in greasy test foodstuff through rapid
extraction in isooctane and/or 95% ethanol
(corresponds to BVL B 80.30-18, 2008-10)
C, N
61. Mitteilung Bundesgesetzblatt-GesundheitsforschGesundheitsschutz
(Notification Federal Law
Gazette Health research and
protection) 46 (2003), 362
Determination of volatile parts in silicon-elastomers
C, N
48. Mitteilung BgesundhBl.
(Notification Federal Law
Gazette Health research and
protection)
25, 334 (1982)
Determination of the organic volatile components in
consumer products from unfoamed polystyrene
N
DIN EN ISO 4098
2006-04
Leather
C
Chemical tests
Determination of water soluble substances, water
soluble anorganic substances and water soluble organic
substances
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
41/90
Annex to the accreditation certificate D-PL-14169-03-03
9
Potentiometric, titrimetric method for technical products and their migrates (textiles,
leather, wood, plastic, polymers, varnishes, dyes consumer products which come into
contact with foodstuff, consumer products which come into contact with skin,
cosmetics, washing and cleaning products)*1) 3)
9.1
Potentiometric, titrimetric standards
DIN EN ISO 4045
2008-05
Leather - chemical tests - determining the pH
C, N
DIN EN ISO 3071
2006-05
Textiles
Determining the pH of the watery extract
C, N
EN ISO 787-9
1995-03
General test method for pigments and filler material
Part 9: Determining the pH value of a watery
suspension
C, N
DIN 53124
1998-08
Paper, cardboard and pulp
Determining the pH value in watery extracts
C, N
DIN EN 14718
2006-10
Influence of organic materials on water for human use
Determination of chlorine loss - test method
N
DIN EN 15933
2012-11
Sludge, treated bio waste and floor - determination of
the pH value
N
9.2
Potentiometric, titrimetric in-house method
QAA-SL-N-1007
Wickbold digestion;
Determination of halogens
N
in connection with:
DIN EN ISO 38405-4
1985-07
QAA-SL-N-4308
German standard methods for water,
sewage and sludge investigation; anions;
determination of fluoride
(fluoride ion selective electrode)
Adsorbable organically bound halogens (AOX) in water,
solid materials and cosmetics in compliance with DIN
EN ISO 9562 (2005-02)
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
42/90
Annex to the accreditation certificate D-PL-14169-03-03
in connection with:
DIN 38414-18
1989-11
German standard methods for the
examination of water, waste water and
sludge - Sludge and sediments (group S);
determination of adsorbable, organically
bound halogens (AOX) (S 18)
QAA-SL-N-4318
Coulometric water determination in organic solutions,
oils and plastics according to Karl Fischer
N
QAA-SL-K-4310
Direct iodometric titration method to determine the
overall chlorine in washing and cleaning products in
compliance with DIN EN ISO 7393-3, Annex B [2000-04]
C
AA QCPR 307_205-02
Determination of the organically bound nitrogen in
migrates
N
QMA 2.516.820
Determination of the pH value in cosmetic products and C
washing and cleaning products in compliance with
DIN 38404-5 (2009-07)
QAA-SL-K/N-4208
Determination of the dry residue, water content of ash
lost/residue of the dry mass
among other things applicable to cosmetics and
washing and cleaning products
10
C, N
Visual method for technical products and their migrates (textiles, leather, wood, plastic,
polymers, lacquer, colors, consumer products which come into contact with foodstuff,
consumer products which come into contact with skin, cosmetics, washing and cleaning
products)*1) 3)
DIN EN 646
2006-07
Paper and cardboard intended for contact with
foodstuff
Determination of color fastness of colored paper and
cardboard
(corresponds to BVL B 80.56-3, 2008-10)
C, N
DIN EN 648
2006-12
Paper and cardboard intended for contact with
foodstuff
Determination of color fastness of optically lightened
paper and cardboard
(corresponds to BVL B 80.56-4, 2008-10)
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
43/90
Annex to the accreditation certificate D-PL-14169-03-03
CR 12471 Part 5.3.4
2002-08
Rapid test for nickel emissions from alloys and coatings
on products which come into direct contact with skin
for a long period
C, N
BVL B 82.10-1
2011-12
Investigation of consumer products
Test of colored children's toys for saliva and sweat
fastness
C, N
DIN 53160-1
2010-10
Determination of the color resistance of consumer
products
Part 1: Test with simulated saliva
C
DIN 53160-2
2010-10
Determination of the color resistance of consumer
products
Part 2: Test with simulated sweat
C
11
Sensory method for technical products (paper, wood, plastic, polymer, varnishes, dyes,
consumer products with which contact foodstuff, water carrying components) *1) 3)
DIN 10955
2004-06
Sensory test
Test of packaging and packaging for foodstuff
(corresponds to BVL B 80.00-4, 2008-10)
C, N
KTW-Leitlinie,
Umweltbundesamt (KTW
Guideline, Federal
Environment Agency)
2012-11
Guideline on hygienic assessment of organic materials
in contact with drinking water
N
KTW-Empfehlung; Mitteilung
2: BgesundhBl. (KTW
recommendation; notification
2: Federal Health Gazette) 20,
124 (1977)
KTW recommendation
Part 2: Chemical investigation of consumer products
used in the drinking water area
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
44/90
Annex to the accreditation certificate D-PL-14169-03-03
12
Elementary analyses *1) 3)
12.1
Standards
DIN EN 62321
2009-12
Electro technology products - determination of the
components of the six contents (lead, mercury,
cadmium, hexavalent chromium, poly-bromised
biphenyl, poly-bromised diphenylether) which are
subject to a restriction
Para. 6 Screening with x-ray fluorescence spectroscopy
C, N
QAA-SL-K/N-4302
Orientating investigation of plastics and alloys using xray fluorescence spectroscopy in compliance with DIN
EN 62321:2009-12 and DIN 51418-2:1996:09
C, N
AA-QCPR-307_53
IR spectroscopic identification of material samples -
N
12.2
In-house method
13
Investigation of metallic materials or metals and alloys *3)
13.1
Sample preparation
DIN EN 10184
2006-05
Chemical analysis of ferrous materials
Determination of phosphorus in steel and iron
spectrophotometric method
(sample preparation)
N
ISO 10138
1991-04
Steel and iron
Determination of the chromium content
Flame atom absorption spectrometric method
(sample preparation)
N
DIN EN 10240
1998-02
Inner and/or outer protective coating for steel pipes
Definitions for coatings manufactured in automatic
plants through hot-zinc galvanization para.11.5
Chemical composition: antimony, arsenic, lead,
cadmium, bismuth
(sample preparation)
N
QAA-SL-K/N-1001
Wet chemical open digestion to determine metal
contents
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
45/90
Annex to the accreditation certificate D-PL-14169-03-03
QAA-SL-K-1006
Aqua regia digestion to determine trace elements
and phosphorus
C, N
QMA 2.516.019
Digestion 1: Steel digestion using HCIO4, HCI,
H3PO4 for Wolfram (W) analysis
C
QMA 2.516.020
Digestion 2: Steel digestion using HCIO4, HNO3,
HCI, HF for analysis of Al, Cr, Co, Cu, Fe, Mn, Mo,
Ni, Ti, V
C
QMA 2.516.021
Digestion 3: Steel digestion using HCI/HNO3 for
analysis of Si, Al and P
C
QMA 2.516.022
Digestion 4: Steel digestion using HCI/HNO3, HF
for analysis of Nb, Te, Bi, Se, Pb, Sb and Sn
C
ISO 3980
1977-02
Aluminum and aluminum alloys
Copper determination
(sample preparation)
N
ISO 886
1973-11
Aluminum and aluminum alloys
Manganate determination
(sample preparation)
N
ISO 3256
1977-05
Aluminum and aluminum alloys
Magnesium determination
Spectrometric atom absorption method
(sample preparation)
N
13.2
Quantifying standards
DIN EN ISO 11885 (E 22)
2009-09
Water quality
Determination of selected elements through inductive C, N
coupled plasma atom emission spectromy (ICP-OES)
(Deviation: acid digestion or according to section
Fehler! Verweisquelle konnte nicht gefunden werden.)
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
46/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 17294-2 (E 29)
2005-02
Water quality
Application of inductive coupled plasma mass
spectromy (ICP-MS)
Part 2: Determination of 62 elements
(Deviation: acid digestion or according to section
Fehler! Verweisquelle konnte nicht gefunden
werden.)
C, N
DIN EN ISO 9556
2002-04
Steel and iron - determination of the overall carbon
content - method with infrared absorption after
combustion in induction oven
N
DIN CEN/TS 15656
2010-02
Copper and copper alloys
Determination of the phosphorus content
spectrometric method
N
DIN EN 16117-2
2013-02
Chemical analysis of copper and copper alloys
determination of copper in unalloyed, at least 99%
copper
N
DIN EN 1254-1, Pkt. 5.4
1998-03
Copper and copper alloys
N
Fittings
Determination of grease residue and residue containing
carbon on inner surfaces HNO3 test for brand new,
soldered copper fittings
ISO 797
1973-11
Copper and copper alloys
Silicon determination
Gravimetric method
14
N
Investigation of construction and other materials *3)
DIN ISO 3856-1
1985-10
Varnish and coating material
Determination of soluble metal content,
Determination of lead content
N
DIN EN ISO 10545-13
1997-12
Ceramic tiles and panels
Determination of the chemical stability
N
DIN EN ISO 10545-14
1997-12
Ceramic tiles and panels
Determination of the resistance against stains
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
47/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 196-2
2013-10
Test method for cement
Chemical analysis of cement
N
DIN EN 459-2
2010-12
Building lime
Part 2: Test method
N
CEN/TR 196-4
2007-09
Test method for cement
N
- Part 4: Quantitative determination of the components
(from the legislator's recommended replacement
standard for the revoked 1164-31)
DIN EN 1744-1
2013-03
Test method for chemical properties of aggregates
Part 1: Chemical analyses
N
DIN 4030-2
Pkt. 5
2008-06
Evaluation of water, ground and gas aggressive to
concrete
Extraction and analysis of water and ground samples
N
DIN EN 12620
Pkt. 6
2008-07
Aggregates for concrete
N
DIN 51084
2008-11
Test for oxidizing raw materials and other materials for
ceramics, glass and glazes
Determination of fluoride content
N
DIN 51102-1
1976-05
Test ceramic raw and other materials
Determination of acid resistance
Method with chunky bulk source for sewerage
stonework
N
DIN EN 993-16
1995-09
Test method for air tight, fireproof products
Determination of resistance against sulfuric acid
N
DIN 55912-2
1999-10
Pigments, titan dioxide pigments
Part 2: Analysis method
N
DIN EN 12802
2011-12
Road marking materials - laboratory method for
identification
N
DIN EN 723
2009-07
Method to determine the carbon on the inner surface
of copper pipes or fittings through combustion
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
48/90
Annex to the accreditation certificate D-PL-14169-03-03
Gütegemeinschaft
Kupferrohr e.V. (Copper pipe
quality association)
RAL-RG 641/1
Section 1
2004-07
Carbon film test on brand new copper pipes
N
Gütegemeinschaft
Kupferrohr e.V.
RAL-RG 641/1
Section 2
2004-07
Quantitative determination of carbon percentage on
inner pipe surface through combustion according to
DIN EN 723
N
DIN EN 15494
2008-01
Candles - Product safety label
C
DIN EN 15493
2008-01
Candles - Specification for fire safety
C
DIN EN 15426
2008-01
Candles - Specification for sooting behavior
C
15
16
Candle testing *3)
Determination of organic substances in construction and other materials *3)
DIN EN 717-1
2005-01
Wooden composite
Determination of the formaldehyde emissions
Part 1: Formaldehyde emissions according to the test
chamber method
N
DIN EN 717-2
1995-01
Wooden composite
Determination of the formaldehyde emissions
Part 2: formaldehyde emissions according to the gas
analysis method
N
Wooden composite
- Determination of the formaldehyde emissions
- Part 3: Gas analysis method
N
Wooden composite
Determination of the formaldehyde content
Extraction method known as perforator method
C
DIN EN 120
1992-08
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
49/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 12460-5
2013-11
Wooden composite
- Determination of the formaldehyde content
- Extraction method (known as perforator method )
C
QAA-SL-N-2033
Determination of chlorophenols and phenols in wood
and material samples using GC-MS
N
In connection with:
DIN EN 14041
2008-05
Elastic, textile and laminate floor
coverings - essential characteristics
DIN EN 14342
2013-09
Parquet and wooden flooring characteristics, evaluation of conformity
and labeling
DIN EN 438-7
2005-04
Decorative high-pressure laminates
(HPL) - panels based on thermosetting
resins (laminate) - Part 7: Compact
panels and HPL multi-layer composite
panels for wall and ceiling covering for
indoor and outdoor use
DIN EN 14915
2013-12
Wall and ceiling covering from solid
wood in interior and exterior areas characteristics, evaluation of conformity
and labeling
VO (EU) Nr. 305/2011
To define harmonized conditions for marketing construction
products
17
Test chamber investigations*3)
DIN EN ISO 15234
2011-02
Coating materials - test of formaldehyde emitting
layers, melamine foams and textiles
Determination of the equalization concentration of
formaldehyde in a small testing room
C
VDA 277
1995-01
Non-metallic materials of the KFZ interior decoration
Determination of the emission of organic connections
C
DIN EN 717-1
2005-01
Wooden composites
Determination of the formaldehyde emissions
Part 1: Formaldehyde emissions according to the test
chamber method
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
50/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 717-2
1995-01
Wooden composites
Determination of the formaldehyde emissions
Part 2: Formaldehyde emissions according to the gas
analysis method
N
DIN EN ISO 12460-3
2013-11
Wooden composites
- Determination of the formaldehyde emissions
- Part 3: Gas analysis method
N
DIN EN 717-3
1996-05
Wooden composites
C, N
Determination of the formaldehyde emissions
Part 3: Formaldehyde emissions according to the bottle
method
DIN EN ISO 10580
2012-04
Elastic, textile and laminate floor coverings - test
N
method for emissions from volatile organic connections
(VOC)
DIN EN ISO 16000-9
2008-04
Indoor area air pollutants
C, N
Part 9: Determination of the emission of volatile organic
connections from construction products and furnishings
emission test chamber method
DIN EN ISO 16000-11
2006-06
Indoor area air pollutants
Part 11: Determination of the emission of volatile
organic connections from construction products and
furniture
Sampling, sample storage and specimen preparation
C, N
DIN ISO 16000-28
2012-12
Indoor area air pollutants
- Part 28: Determination of odor emissions from
construction products with an emission test chamber
N
N
in connection with:
DIN EN 14041
2008-05
Elastic, textile and laminate floor
coverings - essential characteristics
DIN EN 14342
2013-09
Parquet and wooden flooring characteristics, evaluation of conformity
and labeling
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
51/90
Annex to the accreditation certificate D-PL-14169-03-03
ANSI/BIFMA M7.1
2007
DIN EN 438-7
2005-04
Decorative high-pressure laminates
(HPL) - panels based on thermosetting
resins (laminate) - Part 7: Compact
panels and HPL multi-layer composite
panels for wall and ceiling covering for
indoor and outdoor use
DIN EN 14915
2013-12
Wall and ceiling covering from solid
wood in interior and exterior areas characteristics, evaluation of conformity
and labeling
CEN/TS 16516
2013-10
Construction products - evaluation of
the release of hazardous materials determination of emissions in the indoor
air
VDI 4302-1
2012-05
Olfactory inspection of indoor air and
emissions from indoor materials - test
strategy for olfactory test of indoor air
Standard Test Method for Determining VOC Emissions
from Office Furniture Systems, Components and
Seating (mid-scale und small-scale chamber)
C, N
in connection with:
ANSI/BIFMA X7.1
2007
Standard for Formaldehyde and TVOC
Emissions of Low-emitting Office
Furniture Systems and Seating
Greenguard
GGTM.P066.R8
2008-10
Standard Method for Measuring and
Evaluating Chemical Emissions from
Building Materials, Finishes and
Furnishings using Dynamic
Environmental Chambers
VDI 3484
Sheet 2
2001-11
Measuring gaseous imissions
Measuring indoor air pollutants determination of the
formaldehyde concentration according to the acetyl
acetone method
N
ASTM D 6007-02
2008
Standard Test Method for Determining Formaldehyde
Concentration in Air from Wood Products Using a
Small Scale Chamber
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
52/90
Annex to the accreditation certificate D-PL-14169-03-03
ASTM E 1333
2010
Standard Test Method for Determining Formaldehyde
Concentrations in Air and Emission Rates from Wood
Products Using a Large Chamber
ASTM D 5116
2010
Standard Guide for Small-Scale Environmental Chamber N
Determinations of Organic Emissions From Indoor
Materials/Products
ASTM D 6670
2001
(reapproved 2007)
Standard Practice for Full-Scale Chamber Determination N
of Volatile Organic Emissions from Indoor
Materials/Products
NIOSH 3500
1994-08
Formaldehyde by VIS
N
ASTM D 5197
2009
Standard Test Method for Determination of
Formaldehyde and Other Carbonyl Compounds in Air
(Active Sampler Methodology)
N
18
Analytical determination of airborne hazardous material *3)
18.1
Emissions and imissions
N
18.1.1 Emission measurement (analytics)
DIN EN 14385
2004-05
Emissions from stationary sources
Determination of the overall emission of As, Cd, Cr,
Co, Cu, Mn, Ni, Pb, Sb, TI and V
C, N
DIN EN 13211
2001-06
Air quality
Emissions from stationary sources
Manual method to determine the overall mercury
concentration
Filter analytics
inc. amendment 2005-06
C, N
VDI 3874
2006-12
Measurement of emissions
Measurement of polycyclic aromatic hydrocarbons
(PAH)
GC/MS method
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
53/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 13649
2002-05
Emissions from stationary sources
Determination of the mass concentration of individual
gaseous organic connections
Active carbon adsorption - and solvent desorption
method
VDI 3862
Sheet 2
2000-12
Measuring gaseous emissions
C, N
Measuring aliphatic and aromatic aldehyde and ketones
according to the DNPH method
Gas wash bottle method
VDI 3862
Sheet 3
2000-12
Measuring gaseous emissions
C, N
Measuring aliphatic and aromatic aldehyde and ketones
according to the DNPH method
VDI 3862
Sheet 5
2008-06
Measuring gaseous emissions
- Measuring base aldehyde in particular acrolein
according to the 2-HMP method - GC method
C
VDI 2470
Sheet 1
1975-10
Measuring gaseous emissions
Measuring gaseous fluorine connections
Absorption method
N
VDI 3486
Sheet 2
1979-04
Measuring gaseous emissions, measuring the hydrogen N
sulfide concentration
Iodometric method
VDI 3488
Sheet 1
1979-12
Measuring gaseous emissions, measuring the chlorine
concentration
Methyl orange method
N
VDI 3496
Sheet 1
1982-04
Measuring gaseous emissions
Determination of the ascertainable base nitrogen
connections through absorption in sulfuric acid
N
DIN EN 14791
2006-04
Emissions from stationary sources
Determination of the mass concentration of sulfur
dioxide
Reference method
N
DIN EN 1911
2010-12
Emissions from stationary sources
Manual method for determining HCl
Part 3: Analysis of the absorption solutions and
calculation of the results
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
54/90
Annex to the accreditation certificate D-PL-14169-03-03
18.1.2 Imissions measurements (analytics)
VDI 2267
Sheet 1
2012-10
Material determination for particles in the outdoor air - C, N
measurement of the element concentration after filter
sampling - determination of Al, As, Ba, Ca, Cd, Co, Cr,
Cu, Fe, K, Mg, Mn, Na, Ni, Pb, Sb, Se, Sn, Tl, V and Zn
assistance from graphite furnace atom absorption
spectrometry (GF-AAS), optical emission spectrometry
with inductive coupled plasma (ICP-OES) and inductive
coupled plasma mass spectrometry (ICP-MS)
VDI 2267
Sheet 14
2003-12
Material determination of particles in the outdoor air
Measurement of the mass concentration of Al, As, Ca,
Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, V, Zn as
components of the dust fall with help from optical
emission spectrometry (ICP OES)
VDI 2267
Sheet 15
2005-11
Material determination of particles in the outdoor air
C, N
Measurement of the mass concentration of Al, As, Ca,
Cd, Co, Cr, Cu, K, Mn, Ni, Pb, Sb, V, Zn as components of
the dust fall with help from mass spectrometry (ICPMS)
VDI 2100
Sheet 2
2010-11
Measurement of gaseous connections in the outdoor
C, N
air, measurement of indoor air pollutants
Gas chromatographic determination of organic
connections
Active sampling through concentration on active carbon
solvent extraction
VDI 2100
Sheet 3
2011-10
Measurement of gaseous connections in the outdoor
N
air measurement of indoor air pollutants Gas
chromatographic determination of organic connections
Active sampling through concentration on sorbent
thermo desorption
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
55/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN ISO 12884
2000-12
Outdoor air
Determination of the amount of gaseous and particle
bound polycyclic aromatic hydrocarbons
Sampling on filters with down-stream sorbents and
subsequent gas chromatographic / mass spectrometric
analysis
DIN EN 14662-2
2005-08
Air quality
C
Standard method to determine benzene concentrations
Part 2: Sampling with a pump with subsequent solvent
desorption and gas chromatography
DIN EN 14662-5
2005-08
Air quality
C
Standard method to determine benzene concentrations
Part 5: Diffusion sampling with subsequent solvent
desorption and gas chromatography
VDI 2451
Sheet 3
1996-09
Measurement of gaseous imissions, measurement of
the sulfur dioxide concentration
Photometric method (TCM method)
N
VDI 2452
Sheet 2
1975-02
Measurement of gaseous imissions, measurement of
fluoride ion concentration
Silver bullet sorption method with pre-separation and
electrochemical detection
N
VDI 2465
Sheet 1
1996-12
Measurement of soot (imission)
Chemical analytical determination of the elementary
carbon after extraction and thermo desorption of
organic carbon
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C, N
56/90
Annex to the accreditation certificate D-PL-14169-03-03
18.2
Indoor measurements
18.2.1 Analytical determination of particle and gaseous air polluting materials in indoor air
VDI 4301 Sheet 2
2000-06
Measurement of indoor air pollutants, measurement of N
pentachlorophenol (PCP) and hexachlorocyclohexane
(lindane)
GC/MS method
ASTM D 4861
2011
Standard Practice for Sampling and Selection of
Analytical Techniques for Pesticides and
Polychlorinated Biphenyls in Air
VDI 4300 Sheet 2
1997-12
Measurement of indoor air pollutants - measurement
C
strategy for polycyclic aromatic hydrocarbons (PAH),
polychlorized dibenzo-p-dioxine (PCDD), polychlorized
dibenzofurane (PCDF) and polychlorized biphenyl (PCB)
(here: PAH, PCB)
VDI 2100 Sheet 2
2010-11
Measurement of indoor air pollutants gas
C
chromatographic determination of organic connections
Active sampling through concentration on active
carbon, solvent extraction
VDI 2100 Sheet 3
2011-10
Measurement of gaseous connections in the outdoor
C
air, measurement of indoor air pollutants
Gas chromatographic determination of organic
connections
Active sampling through concentration on sorbents and
thermo-desporption
DIN ISO 16000-3
2013-01
Indoor air pollutants
Part 3: Measurement of formaldehyde and other
carbon connections
C, N
DIN ISO 16000-6
2012-11
Indoor air pollutants
Part 6: Determination of VOC in the indoor air and in
test chambers
Sampling on TENAX TA, thermal desorption and gas
chromatography with MS/FID
C, N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
C
57/90
Annex to the accreditation certificate D-PL-14169-03-03
in connection with:
VDI 4300 sheet 1
1995-12
Measurement of indoor air pollutants
General aspects of the measurement
strategy (content checked and continues
to be valid without change: November
2002)
DIN EN ISO 16000-1
2006-06
Indoor air pollutants
Part 1: General aspects of the sampling
strategy
DIN EN ISO 16000-2
2006-06
Indoor air pollutants
Part 2: Sampling strategy for
formaldehyde
DIN EN ISO 16000-5
2007-05
Indoor air pollutants
Part 5: Sampling strategy for volatile
organic connections (VOC)
DIN EN ISO 16017-1
2001-10
Indoor air, outdoor air and air in the work place
sampling and analysis of volatile organic connections
through sorption test tube/thermal
desorption/capillary gas chromatography
Part 1: Sampling with a pump
N
AA-QCPR-307_14
Determination of isocyanates in the air and material
samples using HPLC (MPP method)
N
18.2.2 Determination of microbiological contents in indoor rooms
AA-QCPR-307_175
Airborne germ measurement
N
18.2.3 Analytics of hazardous materials in the work place
BGIA 6045
2009-11
Aldehyde
C, N
BGIA 6172
2007-04
Anorganic acids, volatile:
Hydrogen bromide, hydrogen chloride, nitric acid
N
BGIA 6173
2010-12
Anorganic acids, particulate:
Phosphoric acid, sulfuric acid
N
BGIA 6265
2013-10
Benzene
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
58/90
Annex to the accreditation certificate D-PL-14169-03-03
BGIA 6272
2000-03
Benzo(a)pyrene
N
BGIA 6385
1997-04
1-butanol
N
BGIA 6600
2006-10
chlorinated KW, aliphatic
N
BGIA 6665
2013-04
Chromium (VI) connections
C, N
BGIA 6725
2012-11
Hydrogen cyanide (HCN) and cyanide (CN)
N
BGIA 7120
1999-102010-12
Diisocyanate, monomer (2,4- TDI, 2,6-TDI, 4,4-MDI, HDI) N
Deviation: Use of MPP reagent
BGIA 7330
1997-04
Ethanol
N
BGIA 7322
2009-05
Acetic acid ester
N
BGIA 7512
2006-05
Fluoride and hydrogen fluoride
N
BGIA 7520
2007-11
Formaldehyde (measurement method 2: for higher
N
concentrations);[(measurement method 3 see aldehyde
6045)]
BGIA 7708
2005-04
Ketones, for example butanone
N
BGIA 7732
2011-11
Hydrocarbon, aliphatic
N
BGIA 7733
2005-04
Hydrocarbon, aromatic
N
BGIA 7735
2009-11
Hydrocarbon mixture
N
BGIA 7750
1997-11
Cooling lubricants
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
59/90
Annex to the accreditation certificate D-PL-14169-03-03
BGIA 7810
2012-11
Methanol
N
BGIA 8000
1997-11
Mineral oils, vapor and aerosol
N
BGIA 8580/4
2007-04
Sulfuric acid
N
BGIA 8635
2011-05
Styrene and methyl styrene
N
BGI 505-4
1992-10
Method for determining benzene
C
ISO 15202-3
2004-11
Air in the work place - Determination of metals and
metalloids in airborne particles through atom emission
spectrometry with inductive coupled plasma - Part 3:
Analysis
C
NIOSH 1400
1994-08
Alcohols I (ethanol, isopropanol)
C
NIOSH 1401
1994-08
Alcohols II (butanol, all isomers)
C
NIOSH 1450
2003-03
Ester I
C
NIOSH 1500
2003-03
Hydrocarbon
C
NIOSH 1501
2003-03
Hydrocarbon, aromatic
C
NIOSH 1003
2003-03
Hydrocarbon, halogenized
C
NIOSH 2553
2003-03
Ketones I + II
C
NIOSH 2555
2003-03
Ketones I + II
C
NIOSH 6009
1994-08
Mercury
C
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
60/90
Annex to the accreditation certificate D-PL-14169-03-03
19
Microbiological investigations *3)
Cultural bacteriological and mycological method, microbiological test systems for the
investigation of consumer products and cosmetic products
19.1
Microbiological investigation of consumer products and other solid materials,
antimicrobial effectiveness
BVL B 80.00-1
1998-01
Determination of the surface germ content on
furniture and consumer products in the foodstuff area
Part 1: Quantitative swab method
(according to DIN 10113 part 1)
BVL B 80.00-2
1998-01
Determination of the surface germ content on furniture N
and consumer products in the foodstuff area
Part 2: Semi quantitative swab method
(according to DIN 10113 part 2)
BVL B 80.00-3
1998-01
Determination of the surface germ content in
furnishings and necessary products in the foodstuff
area
Part 3: Semi quantitative method with extraction
apparatus layered with culture medium (impression
method)
(according to DIN 10113 Part 3)
N
JIS Z 2801: 2012
Japanese Industrial Standard
Antimicrobial products - Test for antimicrobial activity
and efficacy
N
DIN EN ISO 846
1997-10
Determination of the influence of microorganisms on
plastic
(A - C)
N
DGHM-Standardmethoden 9
2001-09
Determination of the bactericides and fungicides
Effect in quantitative suspension trial
N
DGHM-Standardmethoden 14
2001-09
Area disinfection - practical trial
N
DGHM-Standardmethoden 16
2001-09
Chemical laundry disinfection
Immersion method (practical trial)
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
N
61/90
Annex to the accreditation certificate D-PL-14169-03-03
DGHM-Standardmethoden 17
2001-09
Chemothermal laundry disinfection single bath method N
according to DIN 11905 with disinfection before the
float is first blown off (practical trial)
QAA-SL-N-6316
Determination of the surface bacterial content on
furnishings and necessary products in the foodstuff area
according to DIN 10113-(1-3)
N
AA-QCPR-307_177
Determination of the surface colony count of cartons,
solid board and corrugated raw paper using the overlay
method
N
AA-QCPR-307_168
Inhibition test for bacteria according to SNV
(Swiss standard) 195920
Test germs: Bacillus subtilis, Pseudomonas putida,
Escherichia coli
N
AA-QCPR-307_169
Inhibition test for mold according to SNV
N
(Swiss standard) 195921
Test germs: Alternaria alternata, Penicillium chrysogenum,
Aspergillus niger
AA-QCPR-307_165
Determination of aerobic mesophilic overall bacterial
count germ
N
AA-QCPR-307_175
Airborne germ measurement
N
QAA-SL-N-6312
Microbiological hygiene test of baths with whirlpool
N
facilities or comparable products according to LGA testing
guidelines (1st change.)
AATCC-100
2004
Antibacterial Finishes on Textile Materials
N
DIN EN 1104
2005-11
Paper and cardboard intended for contact with
foodstuff
Determination of the transfer of antimicrobial
components
N
DIN EN ISO 20645
2005-02
Textile fabrics
Test the antibacterial effect of agar plate diffusion test
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
62/90
Annex to the accreditation certificate D-PL-14169-03-03
19.2
Microbiological investigation of cosmetic products and toys containing water
Ph. Eur. 7th edition 2011
Microbiological test of non-sterile products: Count of
potentially reproductive microorganisms (2.6.12)
N
Ph. Eur. 7th edition 2011
Microbiological test of non-sterile products: Detection
of specified microorganisms (2.6.13)
N
in connection with:
Ph. Eur. 7th
edition 2011
Microbiological quality of non-sterile
pharmaceutical preparations and substances for
pharmaceutical use (5.1.4)
Ph. Eur. 7th edition 2011
Test for sufficient conservation (5.1.3)
N
The European Cosmetic
Toiletry and Perfumery
Association: Guide for
microbiological quality
management of cosmetic
products
1997-08
Chapter 7.2 'Recommended thresholds' and 7.3
'Recommended methods for microbiological testing of
cosmetic products'
(Nürnberg: Analytics; Cologne: Evaluation)
N
20
Technical investigations on textiles, leather, plastics and personal protective equipment
20.1
General*3)
DIN EN ISO 105-A01
2010-05
Textiles
Color fastness test
Part A01: General test basis
C, L
in connection with:
DIN EN 20105-A02
1994-10
Textiles
Color fastness tests
Part A02: Gray scale to evaluate change
in color
DIN EN 20105-A03
1994-10
Textiles
Color fastness tests
Part A03: Gray scale to evaluate change
in bleeding
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
63/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 105-B02
2013-09
Textiles
L
Color fastness tests
Part B02: Color fastness against artificial light: xenon arc
lamp
DIN EN ISO 105-C06
2010-08
Textiles
Color fastness tests
Part C06: Color fastness in household laundry and
commercial laundry
L
DIN EN ISO 105-C10
2007-06
Textiles
Color fastness tests
Part C10: Color fastness against washing with soap or
with soap and soda
L
DIN EN ISO 105-D01
2010-10
Textiles
L
Color fastness tests
Part D01: Determination of dry cleaning resistance with
perchloroethylene solvent
DIN EN ISO 105-E01
2013-06
Textiles
Color fastness tests
Part E01: Color fastness against water
L
DIN EN ISO 105-E02
2013-06
Textiles
Color fastness tests
Part E02: Color fastness against sea water
L
DIN EN ISO 105-E03
2010-08
Textiles
Color fastness tests
Part E03: Color fastness against chlorinated water
(bathing water in swimming pools)
L
DIN EN ISO 105-E04
2013-08
Textiles
Color fastness tests
Part E04: Color fastness against sweat
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
64/90
Annex to the accreditation certificate D-PL-14169-03-03
Textiles
Color fastness tests
Part X05: Color fastness against organic solvents
L
Textiles
Color fastness tests
Part X11: Determination of color fastness against
ironing
L
DIN EN ISO 105-X12
2002-12
Textiles
Color fastness tests
Part X12: Color fastness against rubbing
C, L
BS 4407
1988-07
Test method to determine the amount of fiber
mixtures
C
DIN EN ISO 12945-2
2000-11
Textiles
Determination of textile fabric tendency for fluff build
up on the surface and pilling tendency
Part 2: Modified Martindale method
L
DIN EN ISO 14682
2008-02
Child clothing safety
Cords and straps on children's clothing
L
DIN EN ISO 5077
2008-04
Textiles
Determination of dimensional changes when washing
and drying
L
DIN EN ISO 105-X05
1997-05
DIN EN ISO 105-X11
1996-10
in connection with:
DIN EN ISO 3759
2011-08
Textiles
Preparation, marking and measurement
of measurement samples from fabrics and
pieces of clothing to test the
determination of measurement change
DIN EN ISO 6330
2010-01
Textiles
Non-commercial washing and drying
method to test textiles
DIN EN ISO 139
2011-10
Textiles
Normal climate for sample preparation
and test
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
65/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 12947-2
2007-04
Textiles
Determination of the abrasion resistance of textile
fabrics with the Martindale method
Part 2: Determination of sample deterioration
L
in connection with:
DIN EN ISO 12947-1
2007-04
Textiles
Determination of abrasion resistance of
textile fabrics with the Martindale method
Part 1: Martindale abrasion testing
equipment
DIN EN ISO 12947-3
2007-04
Textiles
Determination of the abrasion resistance of textile
fabrics with the Martindale method
Part 3: Determination of the loss in mass
L
DIN EN ISO 12947-4
2007-04
Textiles
Determination of the abrasion resistance of textile
fabrics with the Martindale method
Part 4: Assessment of the surface change
L
DIN EN ISO 13934-1
2013-08
Textiles
Tensile properties of textile fabrics
Part 1: Determination of the highest tensile force and
tensile force elongation with the tensile test
L
DIN EN ISO 13934-2
2013-09
Textiles
Tensile properties of textile fabrics
Part 2: Determination of the highest tensile strength
with the Grab tensile test
L
DIN EN ISO 13935-1
2014-07
Textiles
L
Tensile tests on stitching in textile fabrics and ready-towear textiles
Part 1: Determination of the highest tensile strength of
stitching with the strip tensile test
DIN EN ISO 13935-2
2014-07
Textiles
L
Tensile tests on stitching in textile fabrics and ready-towear textiles
Part 2: Determination of the highest tensile strength of
stitching with the Grab tensile test
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
66/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 13936-1
2004-07
Textiles
Determination of the sliding resistance of threads in
fabric stitching
Part 1: Method with defined seam opening
L
DIN EN ISO 13936-2
2004-07
Textiles
Determination of the sliding resistance of threads in
fabric stitching
Part 2: Method with defined force
L
DIN EN 12127
1997-12
Textiles
Textile fabrics
Determination of the area-related mass using small
samples
L
DIN EN 1149-1
2006-09
Protective clothing
Electrostatic characteristics
Part 1: Surface resistance (test method and
requirements)
L
DIN EN 1149-2
1997-11
Protective clothing
Electrostatic characteristics
Part 2: Test method for measuring the electrical
resistance through a material (contact resistance)
L
DIN EN 29073-3
1992-08
Textiles
Test method for nonwoven material
Part 3: Determination of the highest tensile force and
tensile elongation force (ISO 9073-3:1989)
L
DIN EN ISO 13937-2
2000-06
Textiles
L
Further characteristics of textile fabrics
Part 2: Determination of tear propagation with the
Schenkel tear propagation test (simple tear propagation
test)
DIN EN 20811
1992-08
Textiles
Determination of the resistance against water
permeation; hydrostatic pressure test
L
DIN EN ISO 9237
1995-12
Textiles
Determination of the air permeability of textile fabrics
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
67/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 13938-2
1999-10
Textiles
Rupture characteristics of textile fabrics
Part 2: Pneumatic method to determine rupture
pressure and rupture buckling
L
DIN EN ISO 105-B04
1997-05
Textiles
Color fastness tests
Part B04: Color fastness tests against artificial
ventilation: xenon arc lamp
L
DIN EN ISO 105-C06
2010-08
Textiles
Color fastness tests
Part C06: Color fastness tests in household laundry and
commercial laundry
L
DIN EN ISO 105-C10
01.06.2007
Textiles
Color fastness tests
Part C10: Color fastness against washing with soap or
with soap and soda
L
DIN EN ISO 105-D01
2010-10
Textiles
L
Color fastness tests
Part D01: Determination of dry cleaning resistance with
perchloroethylene solvent
DIN EN ISO 105-E07
2010-08
Textiles
Color fastness tests
Part E07: Color fastness against stains: water
L
DIN EN ISO 105-X10
1995-12
Textiles
Color fastness tests
Part X10: Determination of the migration of textile
dyestuffs into polyvinylchloride layers
L
DIN EN ISO 105-X11
1996-10
Determination of the color fastness against ironing
L
DIN EN 20105-N01
1995-03
Textiles
Color fastness tests
Part N01: Determination of the color fastness against
bleaching - hypochlorite
L
DIN EN 12770
2000-03
Shoes
Test method for out soles: Abrasion resistance
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
68/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN ISO 4649
2014-03
Elastomer or thermoplastic elastomer determination of L
abrasion resistance with a device with rotating cylinder
drum
DIN 53506
1990-12
Testing rubber and elastomers
Determination of the needle tear out resistance
L
DIN EN 12773
2000-01
Shoes
Test method for out soles: needle tear out resistance
L
DIN ISO 7619-1
2012-02
Elastomer or thermoplastic elastomer
Determination of the indentation hardness
Part 1: Durometer method (Shore hardness)
L
DIN ISO 7619-2
2012-02
Elastomer or thermoplastic elastomer
Determination of the indentation hardness
Part 2: IRHD pocket device method
L
DIN EN ISO 868
2003-10
Plastic and hard rubber
Determination of the indentation hardness with a
durometer (Shore hardness)
L
DIN EN 12771
2000-03
Shoes
Test method for out soles: tear resistance
L
DIN EN ISO 2589
2003-10
Leather
Physical and mechanical tests
Determination of the thickness
L
DIN EN ISO 3377-1
2012-03
Leather
Physical and mechanical tests
Determination of the tear propagation resistance
Part 1: Single edge tear
L
DIN EN ISO 3377-2
2003-10
Leather
Physical and mechanical tests
Determination of tear propagation resistance
Part 2: Double edge tear
L
DIN EN ISO 4674-1
2003-12
Textiles coated with rubber or plastic - determination of L
the tear propagation resistance - Part 1: Method at
constant speed
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
69/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN 53859-4
1977-02
Textile test
Tear propagation resistance on all textile fabrics,
nonwoven fabrics and similar nonwoven textile fabrics
L
DIN EN 13571 amendment 1
2006-10
Shoes
Test method for upper materials, lining and uppers tear resistance
L
DIN EN ISO 3376
2012-03
Leather
Physical and mechanical tests
Determination of the tensile force and elongation
percentage
L
DIN EN ISO 11640
2013-02
Leather
Color fastness test
Determination of the abrasion resistance of dyes
C, L
DIN EN ISO 17700
2005-12
Shoes
Test method for upper materials,
lining and uppers color fastness during abrasion methods A and C
L
DIN EN 13520
2005-03
Shoes
Test method for upper materials,
lining and uppers
Abrasion resistance
L
DIN EN ISO 32100
2011-04
Textiles coated with rubber or plastic physical and
mechanical tests
Determination of the endurance bending strength
according to the flexometer method
L
DIN EN ISO 5402-1
2012-03
Leather
L
Determination of the endurance bending strength - Part
1: Flexometer method
DIN EN 13512
2002-04
Shoes
Test method for upper materials and lining
Buckling resistance
L
DIN EN ISO 13688
2013-12
Protective clothing - general requirements
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
70/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 1421
1998-08
Textiles coated with rubber or plastic - determination of L
the tensile strength and breaking elongation
DIN EN 13522
2002-04
Shoes
Test method for upper materials
Breaking strength and breaking elongation
L
DIN EN ISO 23910
2008-01
Leather
- Physical and mechanical tests - measurement of the
stitch tear strength
Leather
Physical and mechanical tests
Determination of the water vapor permeability
L
Leather testing
L
DIN EN ISO 14268
2013-03
DIN 53325
1974-01
L
Ball indentation test to determine the grain elongation
capacity and the breaking strength with the lastometer
DIN EN ISO 17707
2005-10
Shoes
Test method for out soles: Bending behavior
L
DIN EN ISO 17708
2003-10
Shoes
Test method for the whole shoe: Sole adhesion
L
DIN EN ISO 13287
2013-02
Personal protective equipment
Shoes
Test method to determine slipping resistance
L
DIN EN ISO 20344
2013-02
Personal protective equipment
Test method for shoes
L
DIN EN ISO 20345
2012-04
Personal protective equipment
Protective shoes
L
DIN EN ISO 20346
2012-08
Personal protective equipment
Protective shoes
L
DIN EN ISO 20347
2012-05
Personal protective equipment
Professional shoes
L
DIN EN 388
2003-12
Protective gloves against mechanical risks
Test method according to chapter 6.1 - 6.4
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
71/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 7854
1997-04
Textiles coated with rubber or plastic
Resistance against damage through bending
L
DIN EN 29865
1993-11
Textiles
Determination of water resistant characteristics of
fabrics using the Bundesmann watering test
L
DIN EN 374-2
2003-12
Protective gloves against chemicals and microorganisms L
Part 2: Determination of penetration resistance
DIN EN ISO 4920
2012-12
Textiles
Determination of water resistant characteristics (spray
method)
DIN EN 367
1992-11
Protective clothing - protection against heat and flames L
determination of heat penetration when exposed to
flames
DIN EN 702
1995-01
Protective clothing - protection against heat and flames L
Determination of the contact heat penetration through
protective clothing or its materials
DIN EN ISO 6942
2002-09
Protective clothing - protection against heat and fire
Determination of materials and material combinations
which are exposed to a heat radiation source
L
DIN EN 469
2011-04
Protective clothing for the fire department
Performance requirements for protective clothing for
fighting fires
L
DIN EN 469
2013-02
Protective clothing for the fire department
Performance requirements for protective clothing for
fighting fires (draft)
L
DIN EN 1021-1
2006-04
Furniture
L
Evaluation of the flammability of upholstered furniture
Part 1: Glowing cigarette as a source of ignition
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
L
72/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 1021-1
2013-01
Furniture
L
Evaluation of the flammability of upholstered furniture
Part 1: Glowing cigarette as a source of ignition (draft)
DIN EN ISO 6941
2004-05
Textiles
Flammability
Measurement of the flame spreading characteristics of
vertically arranged samples
DIN EN ISO 15025
2003-02
Protective clothing - protection against heat and flames L
Test method for limited flame formation
EN 1101
1995-11
Textiles
Flammability of curtains and drapes
Detailed method to determine the flammability of
vertically arranged samples (no flame)
L
EN 1102
1995-11
Textiles
Flammability of curtains and drapes
Detailed method to determine the flame spreading
characteristics of vertically arranged samples
L
EN 1103
2005-12
Textiles
Clothing textiles
Detailed method to determine the flammability
L
VDA 75202
2001-08
Vehicle interior materials
Color fastness test against light at high temperatures xenon arc lamp
L
DIN EN ISO 4892-1
2001-09
Plastic - artificial radiation or weathering in devices Part 1: General instructions
L
DIN EN ISO 4892-2
2013-06
Plastic - artificial radiation or weathering in devices Part 2: Xenon arc lamp
L
DIN EN ISO 4892-3
2014-02
Plastic - artificial radiation or weathering in devices Part 3: UV fluorescent lamps
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
L
73/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 1149-5
2008-04
Protective clothing
Electrostatic characteristics
Part 5: Performance requirements on materials and
construction requirements
DIN EN 61340-4-1
(VDE 0300-4-1)
2004-12
Electrostatic
L
Part 4-1: Standard test method for special applications electrical resistance of floor coverings and installed
floors
DIN EN 61340-5-1
(VDE 0300-5-1)
2008-07
Electrostatic
Part 5-1: Protection of electronic components against
electrostatic phenomena - general requirements
L
DIN EN 420
2010-03
Protective gloves
General requirements and test method
L
DIN EN 407
2004-11
Protective gloves against thermal risks (heat and/or
fire)
L
DIN EN ISO 2419
2012-05
Leather
Physical and mechanical tests sample preparation and
conditioning
L
ASTM E96 / E96M - 12
2012
Standard Test Methods for Water Vapor Transmission
of Materials
L
DIN EN 340
2004-03
Protective clothing
General requirements
L
DIN EN 530
2010-12
Abrasion resistance of material for protective clothing - L
test method
DIN EN 31092
2013-09
Textiles
Physiological effects
Measurement of the heat and water vapor penetration
resistance under stationary conditions
L
ISO 1817
2011-09
Elastomers
Determination of behavior towards liquids
L
DIN EN 343
2010-05
Protective clothing - protection against rain
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
L
74/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 3175-2
2010-08
Textiles
Chemical and wet cleaning of textile fabrics and items
of clothing
Part 2: Method to test the behavior when cleaning and
post-treatment using perchlorethylene
L
DIN EN ISO 13938-1
1999-10
Textiles
Rupture characteristics of textile fabrics
Part 1: Hydraulic method to determine rupture
pressure and rupture buckling
L
ISO 4674-1
2003-09
Textiles covered with rubber or plastic
Determination of the tear propagation resistance
Part 1: Method with constant speed
L
ISO 4675
1990-07
Textiles covered with rubber or plastic
Bending test at low temperatures
L
DIN EN ISO 15797
2004-06
Textiles
Industrial wash and finish method to test work clothing
L
CIE 15
2004-01
Colorimetry
L
CIE S 017
2011-01
International dictionary of light technology
L
CIE 18.2
1983-01
The basis of physical photometry
L
CIE 54.2
2001-01
Retroreflection: Definition and measurement
L
DIN EN ISO 20471
2013-09
High-visibility reflective clothing - test method and
requirements
L
DIN EN ISO 3758
2013-12
Textiles
Care labeling code on the basis of symbols
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
75/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 3175-1
2010-08
Textiles - professional care, chemical cleaning, wet
cleaning of textile fabrics and items of clothing - Part 1:
Performance evaluation after cleaning and postprocessing
L
DIN EN ISO 3175-2
2010-08
Textiles - professional care, chemical cleaning, wet
cleaning of textile fabrics and items of clothing - Part 2:
Method for testing the behavior during cleaning and
post-treatment using perchlorethylene
L
DIN EN 1150
1999-02
Protective clothing
Reflective clothing for non-professional use - test
method and requirements
L
IEC 60068-2-32
1975-01
Basic environmental testing procedures
Part 2: Tests. Test Ed: Free Fall
L
ISO 15831
2004-02
Clothing
Physiological effect
Measurement of the heat isolation using a thermal
mannequin
L
ISO 5085-1
1989-11
Textiles
Determination of the thermal resistance
Part 1: Lower thermal resistance
L
ISO 7000
2014-01
DIN EN ISO 14116
2008-08
Graphic symbols on equipment - index and overview
L
DIN EN ISO 14116
2013-01
Protective clothing - protection against heat and flames L
Materials, material combinations and clothing with
limited flame spread
EN ISO 6530
2005-02
Protective clothing - Protection against liquid chemicals K
Determination of the resistance of materials against
liquid permeation
Protective clothing - protection against heat and flames L
Materials, material combinations and clothing with
limited flame spread
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
76/90
Annex to the accreditation certificate D-PL-14169-03-03
ISO 17493
2000-12
Clothing and equipment to protect against heat
Test the convective heat resistance when using a hot
recirculating furnace
L
DIN EN ISO 9185
2007-09
Protective clothing
Determination of the material resistance against liquid
metal splashes
L
DIN EN 14325
2004-05
Protective clothing against chemical test methods and
performance classification for materials, stitches,
connections and composites
L
EN ISO 17491-3
2008-08
Protective clothing
Test method for chemical protective clothing
Part 3: Determination of the resistance against
permeation from a jet of liquid
L
DIN EN ISO 17491-4
2008-12
Protective clothing
Test method for chemical protective clothing
Part 4: Determination of the resistance against
permeation from liquid spray
L
EN 50321
1999-10
Electrical isolation shoes for working in low voltage
plants
L
DIN EN ISO 17249
2014-05
Safety shoes with chainsaw protection
L
ISO 34-1
2010-09
Elastomers or thermoplastic elastomers
Determination of the tear propagation resistance
Part 1: Strip, corner and arch shaped test samples
L
ISO 2023
1994-12
Rubber footwear
Lined rubber boots for industrial use
Requirements
L
ISO 4643
1992-02
Molded plastic footwear
Reinforced or not reinforced PVC shoes for general
industrial use
Requirement
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
77/90
Annex to the accreditation certificate D-PL-14169-03-03
ISO 5423
1992-02
Molded plastic footwear
Reinforced or not reinforced PU shoes for general
industrial use
Requirement
L
DIN EN 12568
2010-10
Foot and leg protection
Requirements and test method for anti-puncture
insoles made from metal and toe caps
L
ISO 20344
2011-12
Personal protective equipment
Test method for shoes
L
DIN EN 13832-3
2006-11
Shoes for protection against chemicals
Part 3: Requirements on shoes which are extremely
resistant to chemicals under laboratory conditions
L
DIN EN ISO 13997
1999-10
Protective clothing
L
Mechanical characteristics
Determination of the resistance against cuts from sharp
objects
DIN EN 374-1
2003-12
Protective gloves against chemicals and microorganisms C
Part 1: Terminology and performance requirements
DIN EN 374-3
2003-12
Protective gloves against chemicals and microorganisms C
Part 3: Determination of the resistance against chemical
permeation
DIN EN 348
1992-11
Determination of the behavior of materials under the
influence of small sprays of melted metal
ISO 15383
2001-09
Protective gloves for the fire department
L
Laboratory test method and performance requirements
EN 14605+A1
2009-05
Protective clothing against liquid chemicals
L
Performance requirements on chemical protection suits
with liquid-tight (type 3) or spray-tight (type 4)
connections between the parts of the clothing including
the items of clothing which only guarantee protection
for part of the body (types PB [3] and PB [4])
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
L
78/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN ISO 13982-1
2011-02
Protective clothing against solid particles - Part 1:
Performance requirements on chemical protective
clothing which guarantees full body protection against
airborne solid particles (clothing type 5)
L
EN 13034 + A1
2009-05
Protective clothing against liquid chemicals Performance requirement on chemical protective
clothing with limited protection performance against
liquid chemicals (equipment types 6 and PB [6])
L
EN 863
1995-09
Protective clothing
Mechanical characteristics
Test method: Resistance against puncturing
L
ISO 4674-2
1998-05
Textiles coated in rubber or plastic
Determination of tear propagation resistance
Part 2: Method with ballistic pendulum
L
DIN ISO 2859-1
2004-01
Acceptance sampling inspection using the number of
faulty units or errors (attribute testing)
Part 1: Sampling inspection plans according to the
acceptable quality limit (AQL) for testing a series of
batches
L
ISO 188
2011-10
Elastomers
Test to determine faster ageing and heat resistance
L
DIN ISO 23529
2012-10
Elastomers
L
General conditions for the preparation and conditioning
of test samples for physical test method
DIN EN ISO 15223-1
2013-02
Medical products - symbols, designation and
information to be provided on medical product labels Part 1: General requirements
L
DIN EN ISO 21171
2006-08
Medical gloves
Determination of the removable surface powder
L
DIN 58124
2010-09
Satchels - Requirements and testing
L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
79/90
Annex to the accreditation certificate D-PL-14169-03-03
ASTM F 2413:2015
Standard Specification for Performance Requirements
for Protective (Safety) Toe Cap Footwear
ASTM F 1614-99:2006
Standard Test Method for Shock Attenuating Properties L
of Materials Systems for Athletic Footwear
ASTM F 1976:2013
Standard Test Method for Impact Attenuation for
Athletic Shoe Cushioning Systems and Materials
L
ASTM F 2412:2011
Standard Test Method for Foot Protection
L
ASTM F 2892:2011
Standard Specification for Performance Requirements
for Soft Toe Protective Footwear (Non-Safety/ NonProtective Toe)
L
ANSI/ISEA 107:2010
American National Standard for High-Visibility Safety
Apparel and Headwear
L
ANSI/ISEA 207:2010
American National Standard for High-Visibility Public
Safety Vest
L
AS NZS 1906.4:2010
Retroreflective materials and devices for road traffic
control purposes - High visibility materials for safety
garments
L
AS NZS 2210.3:2009
Occupational protective footwear - Specification for
safety footwear
L
AS NZS 2210.4:2009
Occupational protective footwear - Specification for
safety footwear
L
AS NZS 2210.5:2009
Occupational protective footwear - Specification for
safety footwear
L
AS NZS 4602.1:2011
High visibility safety garments - Garments for high risk
applications
L
AS NZS 2161.6:2014
Occupational protective gloves - Protective gloves for
structural firefighting - Laboratory test methods and
performance requirements
L
AS NZS 4821:2014
Protective footwear for firefighters - Requirements and L
test methods
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
L
80/90
Annex to the accreditation certificate D-PL-14169-03-03
CAN/CSA-Z195-02 (R2008)
Protective Footwear
L
CSA-Z96 (R2014)
High visibility safety apparel
L
CSA-Z195 (R2009)
Protective Footwear
L
DIN EN 374-2
2013-06
Protective gloves against dangerous chemicals and
micro-organisms
Part 2: Determination of resistance to penetration
(already valid design)
K
DIN EN 374-4
2014-03
Protective gloves against chemicals and microorganisms
Part 4: Determination of resistance to degradation by
chemicals
K
20.2
Directive 89/686/EWG (PSA directive)
Tests according to:


Article 10 (EC type examination)
Article 11 A (EC quality control system for the end product)
For the following products:



















Foot and leg protective equipment against heat ≥ 100°C
Foot and leg protective equipment against cold ≤ -50°C
Foot and leg protective equipment against mechanical risks
Foot and leg protective equipment against chemical risks
Hand and arm protective equipment against heat ≥ 100°C
Hand and arm protective equipment against cold ≤ -50°C
Hand and arm protective equipment against mechanical risks
Hand and arm protective equipment against chemical risks
Hand and arm protective equipment against cuts
Protective gloves against pesticides
Motorcyclist protective gloves
Anti-statically equipped protective gloves
Protective gloves against microorganisms
Protective clothing against heat ≥ 100°C
Protective clothing against cold ≤ 50°C
Protective clothing against chemical risks
Protective clothing against pesticides
Liquid-tight protective clothing
Reflective clothing
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
81/90
Annex to the accreditation certificate D-PL-14169-03-03
Tests according to the following standards and test methods:
EN 343:2003 + A1:2007 /
AC:2009
Protective clothing - protection against rain
C, L
EN 471:2003 + A1:2007
Reflective clothing for professional use
C, L
EN 1150:1999
Reflective clothing for non-professional use
C, L
EN 13356:2001
High visibility reflective accessories
C, L
EN 342:2004 / AC:2008
Cold protection clothing
C, L
EN 14058:2004
Protective clothing - items of clothing to protect against C, L
cold environments
EN 469:2005 + A1:2006 +
AC:2006
Fire department protective clothing
C, L
EN ISO 11611:2013-01
Protective clothing for welders
C, L
EN ISO 11612:2013-01
Protective clothing for industrial workers exposed to
heat
C, L
EN 14605:2005 + A1:2009
Chemical protective clothing types 3 and 4
C, L
EN ISO 20345:2011
Safety shoes
C, L
EN ISO 20347:2012
Professional shoes
C, L
EN 15090:2012
Fire department boots
C, L
EN ISO 17249:2013
Safety shoes with chainsaw protection
C, L
EN ISO 20349:2010
Shoes to protect against thermal risks and splashes of
melted metal
C, L
EN 13832:2006
Shoes to protect against chemicals
C, L
EN 388:2003
Protective gloves against mechanical risks
C, L
EN 374-1:2003
Protective gloves against chemicals and
microorganisms, Part 1
C, L
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
82/90
Annex to the accreditation certificate D-PL-14169-03-03
EN 374-2:2003
Protective gloves against chemicals and
microorganisms, Part 2
C, L
EN 374-3:2003 / AC:2006
Protective gloves against chemicals and
microorganisms, Part 3
C, L
EN 407:2004
Heat protection gloves
C, L
EN 511:2006
Cold protection gloves
C, L
EN 12477:2001
Protective gloves for welders
C, L
EN 659:2003 + A1:2008 /
AC:2009
Fire department protective gloves
C, L
20.3
Testing of samples in the context of the awarding the GS symbol according to the
product safety act for personal protective equipment (PPE)
For the following products:









Hand and arm protective equipment against mechanical risks
Hand and arm protective equipment against cuts
Protective gloves against pesticides
Motorcyclist protective gloves
Anti-statically equipped protective gloves
Protective gloves against microorganisms
Protective gloves against pesticides
Liquid-tight protective clothing
Reflective clothing
21
Mechanical-physical toy testing
21.1
Safety tests*3)
DIN EN 71-1
2014-07
Toy safety
Part 1: Mechanical and physical characteristics
N
DIN EN 71-2
2014-07
Toy safety
Part 2: Flammability
N
DIN EN 71-4
2013-05
Safety of toys
N
Part 4: Experimental sets for chemistry and related
activities
(without: p.t. 5.2.6 tests methods for borosilicate glass)
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
83/90
Annex to the accreditation certificate D-PL-14169-03-03
DIN EN 71-8
2011-11
Toy safety
Part 8: Activity toys for use in the house
N
prEN 71-8
2014-04
Toy safety
Part 8: Activity toys for use in the house (draft)
N
DIN EN 12586
2011-04
Items for infants and young children - pacifier holder Technical safety requirements and test method
N
DIN EN 71-14
2012-08
FprEN 71-14
2014-08
Safety of toys
Part 14: Trampolines for domestic use
N
in connection with:
US 16 CFR
Part 1511
ASTM F 963-11
2011
Requirements for pacifiers
Standard Consumer Safety Specification for Toy Safety
N
4.3.5.1(2) Surface Coating Materials - Soluble Test for
Metals
4.3.5.2 Toy Substrate Materials
4.5
Sound Producing Toys
4.6
Small Objects
4.7
Accessible Edges
4.8
Projections
4.9
Accessible Points
4.10
Wires or Rods
4.11
Nails and Fasteners
4.12
Plastic Film
4.13
Folding Mechanisms and Hinges
4.14
Cords, Straps, and Elastics
4.15
Stability and Overload Requirements
4.16
Confined Spaces
4.17
Wheels, Tires, and Axles
4.18
Holes, Clearances, and Accessibility of
Mechanisms
4.19
Simulated Protective Devices
4.21
Projectile Toys
4.22
Teethers and Teething Toys
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
84/90
Annex to the accreditation certificate D-PL-14169-03-03
4.23.1 Rattles with nearly Spherical, Hemispherical, or
Circular Flared Ends
4.24
Squeeze Toys
4.25
Battery-Operated Toys
4.26
Toys Attached to a Crib or Playpen
4.27
Stuffed and Beanbag-Type Toys
4.30
Toy Gun Marking
4.32
Certain Toys with Nearly Spherical Ends
4.35
Pompoms
4.36
Hemispheric-Shaped Objects
4.37
Yo-Yo Elastic Tether Toys
4.38
Magnets
4.39 Jaw Entrapment in Handles and Steering Wheel
ASTM F 963-07e1
2007
Standard Consumer Safety Specification for Toy Safety
part 4.27 Toy Chests
N
in connection with:
US Code of Federal Regulations Title 16: Commercial Practices
(16 C.F.R.) Chapter II - Consumer Product Safety Commission
Part 1500
Hazardous Substances and Article
Administration and Enforcement Regulations
Part 1500.14
(b) (8)
Labelling of Hazardous Materials
Part 1500.18
Banned toys and other articles intended for use
by children
Part 1500.19
Misbranded toys and other articles intended for
use by children
Part 1500.48
Technical requirements for determining a sharp
point in toys and other articles intended for use
by children under 8 years of age
Part 1500.49
Technical requirements for determining a sharp
metal or glass edge in toys and other articles
intended for use by children under 8 years of age
Part 1500.501500.53
Test methods for simulating use and abuse of
toys and other articles intended for use by
children / 18 months of age or less / over 18 but
not over 36 months of age / over 36 but not over
96 months of age
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
85/90
Annex to the accreditation certificate D-PL-14169-03-03
Part 1500.83
Exemptions for small packages, minor hazards,
and special circumstances
Part 1500.85
Exemptions from classification as banned
hazardous substances
Part 1500.86
Exemptions from classification as a banned toy
or other banned article for use by children
Part 1501
Method for identifying toys and other articles
intended for use by children under 3 years of age
which present choking, aspiration, or ingestion
hazards because of small parts
Part 1505
Requirements for electrically operated toys or
other electrically operated articles intended for
use by children
Part 1510
Requirements for Rattles
Part 1511
Requirements for Pacifiers
Part 1610
Standard of Flammability of Clothing Textiles
US Code of Federal Regulations Title 15: Commerce and Foreign
Trade (15 C.F.R.) Chapter XI - Technology, Administration,
Department of Commerce
Part 1150
Marking of toy, look-alike and imitation firearms
Consumer Product Safety Improvement Act (CPSIA) of 2008
Section 101
Children’s products containing lead; lead paint
rule
Section 102
Mandatory third party testing for certain
children’s products
Section 103
Tracking labels for children’s products
Section 105
Labeling requirement for advertising toys and
games
Section 106
Mandatory toy safety standards
Section 108
Prohibition on sale of certain products containing
specified phthalates
FHSA
2011
Federal Hazardous Substances Act
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
86/90
Annex to the accreditation certificate D-PL-14169-03-03
21.2
ANSI C18.1M
2009
American National Standard for Portable Cells,
Aqueous Electrolyte Batteries Released
ANSI Z 315.1
2006
American National Standard for Tricycles - Safety
Requirements
ASTM F114809
2009
Consumer Safety Performance Specification for
Home Playground Equipment
Directive 2009/48/EG (Toy directive)
Testing according to:

Item 20 (EC type test)
For the following products:

















Walk-in toys
Movement toys
Projectile toys (without catapults or darts, where the darts are used with metal points)
Learning toys (without chemistry)
Learning toys (chemistry)
Model toys, functional toys (without accurate imitations of real firearms)
Dolls and textile toys
Sand toys
Writing, painting and modeling toys
Toys with electric propulsion; nominal voltage up to 24 Volt
Activity toys for use at home (indoors and outdoors)
Other toys
Dressing up toys
Sports toys
Entertainment toys
Water toys
Toys for children under 36 months
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
87/90
Annex to the accreditation certificate D-PL-14169-03-03
Testing according to the following standards and test methods:
DIN EN 71-1
2014-07
Toy safety
Part 1: Mechanical and physical characteristics
N
DIN EN 71-2
2014-07
Toy safety
Part 2: Flammability
N
DIN EN 71-8
2011-11
Toy safety
Part 8: Activity toys for use in the home
N
prEN 71-8
2014-04
Toy safety
Part 8: Activity toys for use in the home (draft)
N
EN 62115
2005-04
Electrical toys - safety (IEC 62115:2003 + A1:2004,
modified)
N
EN 62115:2005/FprAC
2014-01
Electrical toys - safety
N
EN 62115:2005/FprAD
2014-05
Electrical toys - safety
N
EN 62115:2005/A2
2011-07
Electrical toys - safety (IEC 62115:2003/A2:2010,
modified)
N
EN 62115:2005/A11
2012-09
Electrical toys - safety
N
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
88/90
Annex to the accreditation certificate D-PL-14169-03-03
21.3
Testing of samples in the scope of the awarding the GS symbol according to the product
safety act for toys
For the following products:

















Walk-in toys
Movement toys
Projectile toys (without catapults or darts, where the darts are used with metal points)
Learning toys (without chemistry)
Learning toys (chemistry)
Model toys, functional toys (without accurate imitations of real firearms)
Dolls and textile toys
Sand toys
Writing, painting and modeling toys
Toys with electric propulsion; nominal voltage up to 24 Volt
Activity toys for use at home (indoors and outdoors)
Other toys
Dressing up toys
Sports toys
Entertainment toys
Water toys
Toys for children under 36 months
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
89/90
Annex to the accreditation certificate D-PL-14169-03-03
22
Abbreviations used
AA-QCPR
ANSI
ASTM
BGI
BGIA
BIFMA
BS
BVL
CFR
CPSC
CR
DEV
DGHM
DIN
EN
EPA
GGTM
GS
IEC
ISO
JIS
KTW
NIOSH
Ph. Eur.
PPE
QAA
QMA
RL
SNV
TrinkwV
VDA
VDE
VDI
VdL
ZEK
Qualitätsmanagement Arbeitsanweisung Nürnberg
American National Standards Institute
American Society for Testing and Materials
Berufsgenossenschaftliche Information
Berufsgenossenschaftliches Institut für Arbeitsschutz
The Business and Institutional Furniture Manufacturer´s Association
British Standard
Bundesamt für Verbraucherschutz und Lebensmittelsicherheit
Code of Federal Registrations
Consumer Product Safety Commission
CEN Report
Deutsche Einheitsverfahren der Wasseruntersuchung
Deutsche Gesellschaft für Hygiene und Mikrobiologie
Deutsches Institut für Normung e. V.
European Standard
Environmental Protection Agency, USA
Greenguard Test Method
Safety Tested
International Electrotechnical Commission
International Organization for Standardization
Japanese Industrial Standard
Plastic and water
National Institute for Occupational Safety and Health
European Pharmacopoeia
Personal Protective Equipment
Qualitätsarbeitsanweisung Köln
Qualitätsmanagement Arbeitsanweisung Köln
Richtlinie
Schweizer Normen Vereinigung
Trinkwasserverordnung
Verband der Automobilindustrie
Verband der Elektrotechnik Elektronik Informationstechnik e. V
Verein Deutscher Ingenieure
Verband der deutschen Lack- und Druckfarbenindustrie e. V.
Zentraler Erfahrungsaustauschkreis
Period of validity: 15.09.2015 to 01.03.2019
Date of issue: 15.09.2015
- Translation -
90/90