AYU１CONNETOR
AYU SERIES：COAXIAL CONNECTOR
Rev.1.1
From DC to 12GHz
■Features
● This product can correspond to the frequency to 12GHz.
A steady transmission characteristic up to 12 GHz.
As well as the conventional frequency band.
● Space saving design.
Responding to SMT, mounting space of 3.0mm×3.0mm,low
profile of 2.0mm mated height.
● Insertion and removal of a connector is easy.
Dedicated tool (Part No. EJ-AYU1) can insert and remove a
connector easily.
● Extra fine high-frequency cable is adopted.
It corresponds to the cable type [Dia.0.8, Dia.1.13].
● Product corresponding to RoHS.
■General specification
■Applications
●The characteristic impedance: 50Ω
UWB, WiMAX, Wireless LAN, Bluetooth, DSRC,
Mobile phones, PDA, GPS, Express, etc.
●Frequency range: DC to 12GHz
●V.S.W.R.
Cable Type
Socket
(Harnessed)
Dia.0.81
（Single shield SA）
Dia.1.13
（Double shields TA）
Base
DC to 3GHz
From 3 to 6GHz
From 6 to 12GHz
1.3 以下
1.3 以下
1.4 以下
1.3 以下
1.4 以下
1.4 以下
1.3 以下
1.4 以下
1.5 以下
3GHz
6GHz
12GHz
5.8
9.4
14.9
2.9
4.1
6.1
－
－
－
●Insertion loss [dB/m]
Cable Type
Socket
(Harnessed)
Dia.0.81
（Single shield SA）
Dia.1.13
（Double shields TA）
Base
※The above V.S.W.R. Standard values were measured using the measurement
connection shown below.
【Socket(Harnessed)】
Socket (Harnessed): Total length 5,000mm, Connector both end harness.
SMA conversion adapters: AYU1-AP-PP
Ｔo Network Analyzer
Conversion Adapter
Termination
【Base】
Base connector: AYU1-1P-02676-120
SMA conversion adapters: AYU1-AP-JJ
Termination
To Network Analyzer
●Operating temperature range: -25℃ to +85℃
●Withstanding voltage: 200V AC / 1 minute
※Contact JST for details.
J.S.T. MFG. CO., LTD.
Conversion Adapter
AYU１CONNETOR
Socket (Harnessed)
２． ２３
Ｊ ＳＴ
１． ８６
（ ５ ．１８）
（ ４．７６）
（ ４．０３ ）
Material and finish
２．０６
１．５６
１ ．２
（ ３．６ １）
１．６５
２．８
２．８
AYU1 (Dia. 1.13) harness
Ｊ ＳＴ
AYU1 (Dia. 0.81) harness
Contact: Copper alloy. Nickel-undercoated, gold-plated.
Housing: Thermoplastic resin, UL94V-0
Shell: Copper alloy. Copper-undercoated, silver-plated.
■Specification
Total length:
全長Ｌ L
Total length:
全長Ｌ L
Cable Type
（Jacket Diameter, Outer Conductor）
Part No.（Single end harness）
Part No.（Both end harness）
Dia.0.81
（1 layer shield SA）
AYU1-1S21-SYYYY-ZZZV （LF）
AYU1-1S21-XYYYY-000V （LF）
Dia.1.13
（double shields TA）
AYU1-1S13-SYYYY-ZZZV （LF）
AYU1-1S13-XYYYY-000V （LF）
Note1) Outer Conductor SA: Silver plating annealed copper wire. TA: Tin plating annealed copper wire.
Note2) The following alphabet and number shall be put in the model No.
X…alphabet denotes cable end treatment. (D: Both end harness/same direction, R: Both end harness/reverse direction)
Y…number denotes harness length.
Z…number denotes strip length.
V…alphabet denotes color identification. (Blank: Black, G: Gray, W: White, B: Blue)
Example1）Dia.1.13（Double shields TA）cable, both end harness(same direction), total length: 251mm, wire color: Black
Part No.: AYU1-1Ｓ13-D0251-000 （LF）
Example 2）Dia.0.81(Single shield SA) cable, single end harness, total length: 800mm, strip length: (conductor 2.0mm, dielectric1.0mm, insulator1.0mm),
wire color: white
Part No.: AYU1-1S21-S0800-213W （LF）
Contact JST for details about total length and specifics of terminal processing.
●Total standard tolerance for total length of harness.
Total length: L（mm）
Standard tolerance（mm）
35≦Ｌ≦200
±4
200＜Ｌ≦500
±8
500＜Ｌ≦1000
±12
1000＜
±1.5％
※Shortest length L is 35mm
J.S.T. MFG. CO., LTD.
AYU１CONNETOR
Base
Part No.
２．６
Material and Finish
Q'ty / reel
Contact: Copper alloy. Nickel-undercoated, gold-plated.
AYU1-１P-02676-120
5,000
Housing: Thermoplastic resin, UL94V-0
３．０
Shell: Copper alloy. Copper-undercoated, silver-plated.
●Product corresponding to RoHS.
１．８
１． ２８
φ２ ． ０
Taping Specifications
引き 出し 方向
Ｔ ａ ｋ ｉ ｎｇ ｏｕ ｔ ｄ ｉ ｒ ｅ ｃ ｔ ｉ ｏｎ
キャリ アテープ
Ｃａ ｒ ｒ ｉ ｅ ｒ ｔ ａ ｐ ｅ
カバーテープリ ーダー部
Ｃｏ ｖ ｅ ｒ ｔ ａ ｐ ｅ ｌ ｅ ａ ｄ ｅ ｒ
引き出し 方向
φ３ ３ ０
±２
Ｔ ａ ｋ ｉ ｎｇ ｏ ｕ ｔ ｄｉ ｒ ｅ ｃ ｔ ｉ ｏｎ
リーダー部（ 空部）
端末部（ 空部）
コネクタ 装着部
Ｔ ｈ ｅ ｅ ｎｄ ｐ ａ ｒ ｔ
（ Ｅ ｍｐ ｔ ｙ ｒ ｏ ｏ ｍ）
Ｃｏ ｎ ｎ ｅ ｃ ｔ ｏ ｒ
１ ６ ０ ｍｍ　ｍｉ ｎ ．
Ｍｏ ｕ ｎ ｔ ｉ ｎ ｇ ｐ ａ ｒ ｔ
Ｌｅ ａｄ ｅ ｒ ｐａ ｒ ｔ
（ Ｅ ｍｐ ｔ ｙ ｒ ｏ ｏ ｍ）
１ ０ ０ ｍｍ　ｍｉ ｎ ．
４ ０ ０ ｍｍ　ｍｉ ｎ ．
（ φ１ ３ ）
＋２
０
２
±０ ． ５
４
±０ ． １
２
±０ ． １
カバーテープ　Ｃｏ ｖ ｅ ｒ ｔ ａ ｐ ｅ
１２
５．５
±０ ． １
φ１ ． ５ ５
１．７５
±０ ． １
１ ２． ５
±０ ． １
Ａ
Connector
（ ４．７５）
キャリ アテープ
８
Ｃａ ｒ ｒ ｉ ｅ ｒ ｔ ａ ｐ ｅ
●Specifications conform to JIS C 0806. The tape width, connector loading recess square hole dimensions, etc. are determined by the number of circuits and
external shape of the connector to be loaded.
●Specifications are subject to change without prior notice.
J.S.T. MFG. CO., LTD.
AYU１CONNETOR
PC board layout
±０ ． ０ ５
１
±０ ． ０ ５
２．２
±０ ． ０ ５
パターン内部は基板加工禁止エリア
Ｎｏ ｅ ｘ ｐ ｏ ｓ ｅ ｄ ｔ ｒ ａ ｃ ｋ ｉ ｎ ｔ ｈ ｉ ｓ ａ ｒ ｅ ａ
１． ０５
１
±０ ． ０ ５
１．９
４
±０ ． ０ ５
±０ ． ０ ５
Note ) Tolerances are non-cumulative:±0.05mm for all centers.
The dimensions above should serve as a guideline.
Contact JST for details.
Assembly layout
AYU1 (Dia. 1.13) harness
２．５
２
φ０ ． ８ １
φ１ ． １ ３
Ｊ ＳＴ
Ｊ ＳＴ
AYU1 (Dia. 0.81) harness
■Dedicated tool
Part No.： EJ－AYU1
J.S.T. MFG. CO., LTD.