Wall Plates Section K Wall Plates Index Product Wall Plate Types, Finishes and Configurations Features and Benefits Toggle Switches Duplex and Rectangular Receptacles Rectangular and Single Receptacles Single Receptacles Blanks, Strap Mount and Box Mount Toggle Switch and Duplex Combinations Rectangular Combinations Miscellaneous Combinations Miscellaneous Combinations and Switch Plates Stamped 347V Telephone and Coaxial Coaxial, Twinaxial, “D” and RS232 Data and Modular Jack Jumbo Plates Premarked Emergency Premarked Isolated Ground and Computer Only Wall Plate Selection Chart Security Wall Plates Weatherproof Plates – While In Use Protection Weatherproof Plates – Single Receptacles and Switches Weatherproof Liftcovers – 50A Twist-Lock® and Hubbellock Weatherproof Liftcovers – Duplex and Rectangular Receptacles Weatherproof Liftcovers – Switch, Locking and Accessories Weatherproof Liftcovers – Flanged Inlets and Flanged Receptacles Technical Information Custom Metal Wall Plates Page Number K-2 K-3 K-4 K-5 K-6 K-7 K-8 K-9 K-10 K-11 K-12 K-13 K-14 K-15 K-16 K-17 K-18 K-19 K-20 K-21 K-22 K-23 K-24 K-25 K-26 K-27–28 K-29–34 Index Dimensions in Inches (mm) www.hubbell-wiring.com Wall Plates Wall Plates Types, Finishes and Configurations Types, Finishes and Configurations P8 Smooth Nylon P1G Smooth Nylon HPS1WA Smooth Nylon P1X Smooth Nylon P1B Smooth Nylon P1R Smooth Nylon SPJ26 Smooth Nylon S1 Stainless Steel B1 Solid Brass CH8 Chrome Plated Steel BP1 Brass Plated Steel IGP8 Premarked Nylon S8MEV Premarked Stainless Steel PJ8C Premarked Nylon A1 Aluminum Actual product may vary from photos shown above. K-2 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Features and Benefits Only The Best Materials Smooth Metal 302/304 Super Stainless Steel Hubbell offers a wide variety of configurations available in high-impact nylon and metal wall plates. In 1981, Hubbell was the first manufacturer to introduce nylon wall plates. Hubbell only offers plastic plates made of a high-impact material and does not offer wall plates made of materials that may be subject to breakage in abusive environments. Hubbell offers only the best grade of stainless steel type 302/304, which is 18% chromium, 8% nickel, and non-magnetic providing superior corrosion resistance versus type 430 stainless steel. When you specify Hubbell wall plates you can be assured of the highest quality materials providing extended life in the most abusive environments. 18% Chromium, 8% Nickel For Commercial, Institutional, Hospital and Industrial Applications. Provides extended life in abusive and corrosive environments. Contemporary smooth finish and contoured edges enhance installation appearance. Smooth finish without recessed lines is easy to clean and maintain attractive appearance. Satin finish hides fingerprint marks. Non-magnetic for static-free requirements. High-Impact Smooth Nylon Dimensions in Inches (mm) For Commercial, Institutional and Industrial Applications. Smooth Solid Brass Provides a plush appearance and durability of metal. Finish is coated to inhibit oxidation. Smooth Solid Anodized Aluminum Non-magnetic and corrosion resistant providing suitability for a wide range of applications. Finish is coated to inhibit oxidation. Metallic Plated Steel Available in a choice of chrome and brass finishes. Custom Metal Wall Plates Hubbell offers 40 custom configurations available in 5 metal finishes from 2-gang up to and including 8- gang configurations. These custom openings can be configured in any combination to meet your specific requirements. www.hubbell-wiring.com K-3 Features and Benefits For Commercial, Institutional, Hospital and Industrial Applications. High-impact resistance limits access to live parts due to breakage. Contemporary smooth finish and contoured edges enhance installation appearance. Captive screw feature holds mounting screw in place for quick and easy installation. Positive “Bow” feature assures flush installation. Self-extinguishing nylon material. Smooth finish without recessed lines is easy to clean and maintain attractive appearance. Highly resistant to solvents and cleaning solutions providing long life in the harshest environments. Non-conductive material. Smooth Solid Brass, Anodized Aluminum and Metallic Plated Steel Wall Plates Wall Plates Nylon and Metal Switch Plates Toggle Switch Plates Toggle Switch Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory P1 PJ1 Chrome CH1 White P1W PJ1W Brass BP1 Brown P1X PJ1X – – Gray P1G – – – Office White P1OW PJ1OW – – Black P1B – – – 1-Gang, 1 Switch. Red P1R PJ1R – – Ivory P2 PJ2 Chrome CH2 White P2W PJ2W Brass BP2 Brown P2X PJ2X – – Gray P2G – – – Office White P2OW PJ2OW – – Black P2B – – – 2-Gang, 2 Switches. Red P2R PJ2R – – Ivory P3 PJ3 Chrome CH3 White P3W PJ3W Brass BP3 Brown P3X PJ3X – – Gray P3G – – – Office White P3OW PJ3OW – – Black P3B – – – 3-Gang, 3 Switches. – – – – – Ivory P4 – Chrome c White P4W – Brass BP4 Brown P4X – – – Gray P4G – – – Office White P4OW – – – – – – – – 4-Gang, 4 Switches. – – – – – Ivory P5 – Chrome c White P5W – Brass c Brown P5X – – – Gray P5G – – – – – – – – 5-Gang, 5 Switches. – – – – – Ivory P6 – Chrome c White P6W – Brass c Brown P6X – – – Gray P6G – – – – – – – – 6-Gang, 6 Switches. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – 7-Gang, 7 Switches. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – 8-Gang, 8 Switches. – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 2-Gang, 1 Switch. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34 for custom wall plates. Consult custom wall plate section for additional openings and combinations. K-4 www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S1 S/S Beveled 97071 Brass Smooth B1 Alum. Smooth A1 – – – – – – S/S Smooth S2 Brass Smooth B2 Alum. Smooth A2 – – – – – – – – S/S Smooth S3 Brass Smooth B3 Alum. Smooth c – – – – – – – – S/S Smooth S4 Brass Smooth B4 Alum. Smooth c – – – – – – – – S/S Smooth S5 Brass B5 Alum. Smooth c – – – – – – S/S Smooth S6 Brass Smooth B6 Alum. Smooth c – – – – – – S/S Smooth S601 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S602 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S740 – – – – – – – – – – Dimensions in Inches (mm) Wall Plates Wall Plates Nylon and Metal Wall Plates Duplex Receptacle Plates Mid-Size PJ8 PJ8W PJ8X PJ8G PJ8OW – PJ8R – PJ82 PJ82W PJ82X – PJ82OW – PJ82R – – – – – – – – – – – – – – – – – Plated Steel, Smooth Chrome Brass – – – – – – Chrome Brass – – – – – CH8 BP8 – – – – – – CH82 BP82 – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S/S Beveled Brass Smooth Alum. Smooth – – – – S/S Smooth Brass Smooth Alum. Smooth – – – – Chrome Brass – – – – Chrome Brass – – – – – – – – – c BP83 – – – – c c – – – – – – – – – S/S Smooth Brass Smooth Alum. Smooth – – – S/S Smooth Brass Smooth Alum. Smooth – – – S/S Smooth – – – – S8 97101 B8 A8 – – – – S82 B82 A82 – – – – S83 c c – – – S84 c c – – – S748 – – – – GFCI, Surge Receptacles and Style Line® Device Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory HPS1I PJ26 Chrome CH26 White HPS1WA PJ26W Brass BP26 Brown HPS1 PJ26X – – Gray HPS1GY PJ26G – – Office White HPS1OW PJ26OW – – Black HPS1B – – – 1-Gang, Red HPS1R PJ26R – – 1 Rectangular Device. Blue – SPJ26 – – Ivory HPS2I PJ262 Chrome CH262 White HPS2WA – Brass BP262 Brown HPS2 PJ262X – – Gray HPS2GY – – – Office White HPS2OW PJ262OW – – 2-Gang, Black HPS2B – – – 2 Rectangular Devices. Red HPS2R – – – Ivory HPS3I – Chrome c White HPS3WA – Brass BP263 Brown HPS3 – – – Gray HPS3GY – – – 3-Gang, Office White HPS3OW – – – 3 Rectangular Devices. Black HPS3B – – – cAvailable as custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. Dimensions in Inches (mm) www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S26 Brass Smooth B26 Alum. Smooth c – – – – – – – – – – S/S Smooth S262 Brass Smooth B262 Alum. Smooth c – – – – – – – – S/S Smooth S263 Brass Smooth B263 Alum. Smooth c – – – – – – K-5 Duplex Receptacle and Rectangular Plates Smooth High-Impact Nylon Configuration Color Standard Ivory P8 White P8W Brown P8X Gray P8G Office White P8OW Black P8B 1-Gang, Red P8R 1 Duplex Receptacle. Orange P8OR Ivory P82 White P82W Brown P82X Gray P82G Office White P82OW Black P82B Red P82R 2-Gang, 2 Duplex Receptacles. Orange P82O – – – – – – – – – – 3-Gang, 3 Duplex Receptacles. – – – – – – – – – – – – 4-Gang, 4 Duplex Receptacles. – – – – – – – – – – 2-Gang, 1 Duplex Receptacle. – – Wall Plates Wall Plates Nylon and Metal Wall Plates GFCI, Surge Receptacle and Style Line® Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Ivory HPS4I – White HPS4WA – Brown HPS4 – Gray HPS4GY – Black HPS4B – 4-Gang, 4 Rectangular Devices. Office White HPS4OW – Ivory HPS5I – White HPS5WA – Brown HPS5 – Gray HPS5GY – Black HPS5B – 5-Gang, 5 Rectangular Devices. – – – Ivory HPS6I – White HPS6WA – Brown HPS6 – Gray HPS6GY – Black HPS6B – 6-Gang, 6 Rectangular Devices. – – – Plated Steel, Smooth Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S264 Brass Smooth B264 Alum. Smooth c – – – – – – S/S Smooth S265 Brass Smooth B265 Alum. Smooth c – – – – – – S/S Smooth S266 Brass Smooth B266 Alum. Smooth c – – – – – – Rectangular and Single Receptacle Plates Single 15/20A Straight Blade or 15A Twist-Lock® Receptacle Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory P7 PJ7 Chrome CH7 White P7W PJ7W Brass BP7 1.40" (35.6) I.D. HOLE Brown P7X PJ7X – Gray P7G – – – Office White P7OW PJ7OW – – 1-Gang, 1 Receptacle for Red P7R PJ7R – – 1.36-1.39” (34.5-35.3) dia. face. Black P7B – – – – – – – – 1.40" (35.6) – – – – – I.D. HOLE – – – – – – – – – – – – – – – 2-Gang, 1 Receptacle for – – – – – 1.36-1.39” (34.5-35.3) dia. face. – – – – – – – – Chrome c 1.40" (35.6) – – – Brass c I.D. HOLES – – – – – – – – – – – – – – – 2-Gang, 2 Receptacles for – – – – – 1.36-1.39” (34.5-35.3) dia. face. – – – – – cAvailable as custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. K-6 www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S7 Brass Smooth B7 Alum. Smooth A7 – – – – – – – – S/S Smooth S747 – – – – – – – – – – – – S/S Smooth S72 Brass Smooth c Alum. Smooth c – – – – – – – – Dimensions in Inches (mm) Wall Plates Wall Plates Nylon and Metal Wall Plates Single 20/30A Twist-Lock® Receptacle Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Ivory P720 – White P720W – 1.60" (40.6) I.D. HOLE Brown P720X – Gray P720G – Office White P720OW – 1-Gang, 1 Receptacle for Red P720R – 1.55”-1.58” (39.4-40.1) dia. face. Black P720B – – – – – – – 1.60" (40.6) I.D. HOLE – – – – – – – – – 2-Gang, 1 Receptacle for – – – 1.55”-1.58” (39.4-40.1) dia. face. – – – – – – 1.60" (40.6) – – – I.D. HOLES – – – – – – 3-Gang, 2 Receptacles for – – – 1.55”-1.58” (39.4-40.1) dia. face, – – – center blank. – – – Plated Steel, Smooth Chrome c Brass c – – – – – – – – – – – c – – – – – – – – – – – – Chrome c Brass c – – – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S720 Brass Smooth B720 Alum. Smooth A720 – – – – – – – – S/S Smooth S749 – – – – – – – – – – – – S/S Smooth S320 Brass Smooth c Alum. Smooth c – – – – – – – – Single Receptacle Plates Dimensions in Inches (mm) www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S723 Brass Smooth c Alum. Smooth A723 – – – – – – S/S Smooth S702 – – – – – – – – – – S/S Smooth S703 – – – – – – – – – – S/S Smooth S701 Brass Smooth B701 – – – – – – – – S/S Smooth S716 – – – – – – – – – – K-7 Single Receptacle Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory P724 – Chrome CH723 – – – Brass c 2.15" (54.6) I.D. HOLE Brown P724X – – – – – – – – 1-Gang, for 2.09”-2.13” – – – – – (53.1-54.1) dia. face. Black P724B – – – – – – Chrome CH702 – – – – – 2.15" (54.6) I.D. HOLE – – – – – – – – – – 2-Gang, for 2.09”-2.13” – – – – – (53.1-54.1) dia. face. – – – – – Ivory P703 – – – White P703W – – – 2.15" (54.6) I.D. HOLE Brown P703X – – – – – – – – 2-Gang, for 2.09”-2.13” – – – – – (53.1-54.1) dia. face. Black P703B – – – – – – – – – – – – – 2.48" (63.0) I.D. HOLE – – – – – – – – – – 2-Gang, for 2.41”-2.44” – – – – – (61.2-62.0) dia. face. – – – – – – – – – – – – – – – 2.66" (67.6) I.D. HOLE – – – – – – – – – – 2-Gang, for 2.63”-2.65” – – – – – (66.8-67.3) dia. face. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. Wall Plates Wall Plates Nylon and Metal Wall Plates Blank Plates, Strap Mount Configuration 1-Gang Blank, Strap Mount. 2-Gang Blank, Strap Mount. 3-Gang Blank, Strap Mount 4-Gang Blank, Strap Mount. Smooth High-Impact Nylon Color Standard Mid-Size Ivory P14 – White P14W – Brown P14X – Gray P14G – Office White P14OW – Red P14R – Black P14B – Ivory P24 – White P24W – Brown P24X – Gray P24G – Office White P24OW – Red P24R – Black P24B – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Plated Steel, Smooth Chrome c Brass c – – – – – – – – – – Chrome c Brass c – – – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S14 Brass Smooth B14 Alum. Smooth c – – – – – – – – S/S/ Smooth S24 Brass Smooth c Alum. Smooth c – – – – – – – – S/S/ Smooth S34 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S44 Brass Smooth c Alum. Smooth c – – – – – – Blank Plates Blank Plates, Box Mount Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory – PJ13 Chrome CH13 White – PJ13W Brass BP13 Brown – PJ13X – – Office White – PJ13OW – – – – – – – 1-Gang Blank, Box Mount. – – – – – – – – Chrome CH23 – – – Brass c – – – – – – – – – – – – – – – 2-Gang Blank, Box Mount. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – 3-Gang Blank, Box Mount. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – 4-Gang Blank, Box Mount. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. K-8 www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S13 Brass Smooth B13 Alum. Smooth A13 – – – – – – S/S Smooth S23 Brass Smooth B23 Alum. Smooth A23 – – – – – – S/S Smooth S33 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S43 Brass Smooth c Alum. Smooth c – – – – – – Dimensions in Inches (mm) Wall Plates Wall Plates Nylon and Metal Wall Plates Switch and Duplex Receptacle Combination Plates Dimensions in Inches (mm) www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S18 Brass Smooth B18 Alum. Smooth c – – – – – – – – S/S Smooth S28 Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth S38 Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth S182 Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – – – K-9 Combination Switch and Duplex Receptacle Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory P18 PJ18 Chrome CH18 White P18W PJ18W Brass BP18 Brown P18X PJ18X – – Gray P18G – – – Office White P18OW – – – Red P18R PJ18R – – 2-Gang, 1 Switch, 1 Duplex. – – – – – Ivory P28 – Chrome c White P28W – Brass BP28 Brown P28X – – – Gray P28G – – – Office White P28OW – – – – – – – – 3-Gang, 2 Switches, 1 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – – – – – – 4-Gang, 3 Switches, 1 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – – – – – – 5-Gang, 4 Switches, 1 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – – – – – – 3-Gang, 1 Switch, 2 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – – – – – – 4-Gang, 1 Switch, 3 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – – – – – – 4-Gang, 2 Switches, 2 Duplex – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. Wall Plates Wall Plates Nylon and Metal Wall Plates Switch and Style Line® GFCI, Surge Combination Plates Configuration 2-Gang, 1 Switch, 1 Rectangular Device. 3-Gang, 2 Switches, 1 Rectangular Device. 4-Gang, 3 Switches, 1 Rectangular Device. 5-Gang, 4 Switches, 1 Rectangular Device. Combination Switch and Rectangular Plates 3-Gang, 1 Switch, 2 Rectangular Devices. Smooth High-Impact Nylon Color Standard Mid-Size Ivory – PJ126 White – PJ126WA Brown – PJ126X – – – – – – – – – Ivory – PJ226 White – PJ226WA Brown – PJ226X – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – 4-Gang, 1 Switch, – – – 3 Rectangular Devices. – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. Plated Steel, Smooth Chrome c Brass BP126 – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S126 Brass Smooth B126 Alum. Smooth c – – – – – – S/S Smooth S226 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S326 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – Standard Combination Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory P826 – Chrome c White P826W – Brass c Brown P826X – – – Gray P826GY – – – 2-Gang, 1 Duplex, Black P826BK – – – 1 Rectangular Device. – – – Office White P826OW – – – Chrome c – – – Brass c – – – – – – – – – – 2-Gang, 1 Blank, Strap Mount – – – – – 1 Rectangular Device. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. K-10 www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S826 Brass Smooth B826 Alum. Smooth c – – – – – – S/S Smooth S1426 Brass Smooth c Alum. Smooth c – – – – – – Dimensions in Inches (mm) Wall Plates Wall Plates Nylon and Metal Wall Plates Standard Combination Plates Dimensions in Inches (mm) www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S78 Brass Smooth c Alum. Smooth c – – – – – – S/S Box Mount S739 S/S Smooth S8720 Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth S148 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S138 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S211 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S8147 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S114 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S113 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S213 Brass Smooth c Alum. Smooth c – – – – – – K-11 Combination Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth Ivory P78 – Chrome c White P78W – Brass c 1.40" (35.6) I.D. HOLE Brown P78X – – – Gray P78G – – – 2-Gang, 1 Duplex, – – – – – 1 Single Receptacle, – – – – – for 1.36”-1.39” (34.5-35.3) dia. face. – – – – – – – – Chrome c 1.60" (40.6) – – – Brass c I.D. HOLE – – – – – – – – – – 2-Gang, 1 Duplex, – – – – – 1 Single Receptacle, – – – – – for 1.55”-1.58” (39.4-40.1) dia. face. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 2-Gang, – – – – – 1 Blank Strap Mount, 1 Duplex. – – – – – Ivory – PJ148 Chrome c White – PJ148W Brass c Brown – PJ148X – – – – – – – 2-Gang, – – – – – 1 Blank Box Mount, 1 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 3-Gang, 2 Duplex, – – – – – 1 Blank, Box Mount. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 3-Gang, 1 Duplex, – – – – – 1 Blank Box Mount, 1 Duplex. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 2-Gang, 1 Switch, – – – – – 1 Blank, Strap Mount. – – – – – Ivory – PJ113 Chrome c White – PJ113W Brass c Brown – PJ113X – – – – – – – 2-Gang, 1 Switch, – – – – – 1 Blank, Box Mount. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 3-Gang, 2 Switches, – – – – – 1 Blank, Box Mount. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. Wall Plates Wall Plates Nylon and Metal Wall Plates Standard Combination Plates Configuration 1.40" (35.6) I.D. HOLE 2-Gang, 1 Switch, 1 Single Receptacle for 1.36”-1.39” (34.5-35.3) dia. face. 1-Gang Vertical Mounted Louver. Smooth High-Impact Nylon Color Standard Mid-Size – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Plated Steel, Smooth Chrome c Brass c – – – – – – – – – – Chrome c Brass BP771 – – – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth c Brass Smooth c Alum. Smooth c – – – – – – – – S/S Smooth S771 Brass Smooth B771 Alum. Smooth c – – – – – – – – 347 Volt Switch Plates with 2.25" (57.2) Spacing Between Gangs, Stamped “347V” Configuration Combination and Switch Plates Stamped “347V” 1-Gang, 1 Switch. 2.25” (57.2) Spacing. Smooth High-Impact Nylon Color Standard Mid-Size – – – – – – – – – – – – – – – – – – – – – – – – – – – 2-Gang, 2 Switches, – – – 2.25” (57.2) Spacing. – – – – – – – – – – – – – – – 3-Gang, 3 Switches, – – – 2.25” (57.2) Spacing. – – – – – – – – – – – – – – – 4-Gang, 4 Switches, – – – 2.25” (57.2) Spacing. – – – – – – – – – – – – – – – 5-Gang, 5 Switches, – – – 2.25” (57.2) Spacing. – – – – – – – – – – – – – – – 6-Gang, 6 Switches, – – – 2.25” (57.2) Spacing. – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. K-12 www.hubbell-wiring.com Plated Steel, Smooth – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S1C – – – – – – – – S/S Smooth – – – – – S/S Smooth – – – – – S/S Smooth – – – – – S/S Smooth – – – – – S/S Smooth – – – – – S2C – – – – – S3C – – – – – S4C – – – – – S5C – – – – – S6C – – – – – Dimensions in Inches (mm) Wall Plates Wall Plates Nylon and Metal Wall Plates Telephone and Coaxial Outlet Plates Dimensions in Inches (mm) Plated Steel, Smooth Chrome c Brass c – – – – – – – – Chrome CH12d Brass BP12d – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S738 Brass Smooth B738 Alum. Smooth c – – – – – – S/S Smooth S12d Brass Smooth B12d Alum. Smooth A12d – – – – – – Chrome Brass – – – – Chrome Brass – – – – – – – – – – – – – – – – S/S Smooth Brass Smooth Alum. Smooth – – – S/S Smooth Brass Smooth Alum. Smooth – – – – – – – – – – – – – – – S22d c c – – – S739 c c – – – – – – – – – – – – – – – – – – – – – S/S Smooth Brass Smooth Alum. Smooth – – – – – – – – – S11d c c – – – S/S Smooth – – – – – S741d – – – – – – – – – – – Chrome Brass – – – – www.hubbell-wiring.com – – – – – – c c – – – – c c – – – – – – – – – – – – – – – – – – – – – – c BP11d – – – – – – – – – – K-13 Telephone and Coaxial Plates Smooth High-Impact Nylon Configuration Color Standard Mid-Size – – – – – – – – – – – – 1-Gang, .38” (9.6) Hole, – – – Coaxial, Strap Mount. – – – Ivory P12 – White P12W – Brown P12X – Gray P12G – 1-Gang, Nylon .59” (15.0) Hole, Black P12B – Metal .64” (16.3) hole, – – – Telephone, Strap Mount. – – – – – – – – – – – – 1-Gang, Two .64” (16.3) Holes, – – – Telephone, Strap Mount. – – – – – – – – – – – – – – – 1-Gang, .38” (9.6) Hole, – – – Coaxial, Box Mount. – – – Ivory – PJ211 White – PJ211W – – – – – – Cable TV Plate, with two .38” – – – (9.6) Knockouts, Box Mount. – – – Ivory – PJ212 White – PJ212W – – – – – – Cable TV Plate, with two .38” – – – (9.6) Knockouts and 1 Type F – – – RG59 Connector, Box Mount. Ivory – PJ216 – – – Brown – PJ216X Office White – PJ216OW 1-Gang, with 6 Conductor – – – Telephone Jack, Box Mount. – – – Ivory – PJ11 White – PJ11W Brown – PJ11X – – – 1-Gang, Nylon .59” (15.0) Hole, – – – Metal .64” (16.0) hole, – – – Telephone, Box Mount. – – – – – – – – – – – – 2-Gang, .64” (16.3) Hole, – – – Centered, Box Mount. – – – cAvailable as a custom wall plate. See pages K-29 to K-34. d.50” (12.7) nylon bushing provided. Consult custom wall plate section for additional openings and combinations. Wall Plates Wall Plates Metal Wall Plates 1 Gang Coaxial and Twinaxial “D” Outlet Plates, Box Mount Configuration 1 “D” Hole, .51” (12.9) dia., .44” (11.2) Flat. 1 “D” Hole, .51” (12.9) dia., .47” (12.0) Flat. 2 “D” Holes, .51” (12.9) dia., .44” (11.2) Flat. Coaxial, Twinaxial “D” Outlet Plates and RS232 Plates 2 “D” Holes, .51” (12.9) dia., .47” (12.0) Flat. 1 “D” Hole, .58” (14.7) dia., .55” (14.0) Flat. 2 “D” Holes, .58” (14.7) dia., .55” (14.0) Flat. 1 “D” Hole, .76” (19.3) dia., .73” (18.5) Flat. Smooth High-Impact Nylon Color Standard Mid-Size – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – Plated Steel, Smooth Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Chrome c Brass c – – – – – – – – Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth SD1422 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth SD1425 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth SD1423 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth SD1426 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth SD1428 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth SD1429 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth SD1430 Brass Smooth c Alum. Smooth c – – – – – – Type RS232, 25 Pin Outlet Plates, Box Mount Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – 1-Gang, One 25 Pin Opening. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – – – – – – 1-Gang, Two 25 Pin Openings. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. K-14 www.hubbell-wiring.com Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth S232 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth S234 Brass Smooth c Alum. Smooth c – – – – – – Dimensions in Inches (mm) Wall Plates Wall Plates Metal Wall Plates Data and Voice Modular Jack Outlet (RJ11 and RJ45 Type), Box Mount Smooth High-Impact Nylon Configuration Color Standard Mid-Size Plated Steel, Smooth – – – Chrome c – – – Brass c – – – – – – – – – – 1-Gang, One .59” x .76” – – – – – (15.0 x 19.3) Opening. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 1-Gang, Two .59” x .76” – – – – – (15.0 x 19.3) Openings. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 2-Gang, Four .59” x .76” – – – – – (15.0 x 19.3) Openings. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 1-Gang, One .59” x .82” – – – – – (15.0 x 20.8) Opening. – – – – – – – – Chrome c – – – Brass c – – – – – – – – – – 1-Gang, Two .59” x .82” – – – – – (15.0 x 20.8) Openings. – – – – – cAvailable as a custom wall plate. See pages K-29 to K-34. Consult custom wall plate section for additional openings and combinations. Stainless Steel (S/S) Brass Anodized Aluminum S/S Smooth ST1473 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth ST1474 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth ST2474 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth ST1476 Brass Smooth c Alum. Smooth c – – – – – – S/S Smooth ST1477 Brass Smooth c Alum. Smooth c – – – – – – Data and Voice Modular Jack Plates Dimensions in Inches (mm) www.hubbell-wiring.com K-15 Wall Plates Wall Plates 3.50" (88.9) Jumbo, Smooth Stainless Steel Wall Plates Jumbo, Smooth, Stainless Steel Type 302/304 Wall Plates Configuration Catalog Numbers Configuration 5.25" (133.4) Jumbo Wall Plate Catalog Numbers 2.15" (54.6) I.D. HOLE 1-Gang, 1 Switch. SJ1 1-Gang, Single Receptacle for 2.09”-2.13” (53.1-54.1) dia. face. SJ723 2-Gang, 2 Switches. SJ2 1-Gang Blank, Box Mount. SJ13 1-Gang, 1 Duplex Receptacle. SJ8 1-Gang, 1 Telephone Opening, .64” (16.3) Box Mount. SJ11c 2-Gang, 2 Duplex Receptacles. SJ82 2-Gang, 1 Switch, 1 Duplex. SJ18 1-Gang, 1 Rectangular Device. SJ26 2-Gang, 1 Switch, 1 Rectangular Device. SJ126 2-Gang, 2 Rectangular Devices. SJ262 3-Gang, 2 Switches, 1 Rectangular. SJ226 1.40" (35.6) I.D. HOLE Jumbo Wall Plates 1-Gang, 1 Single Receptacle for 1.36”-1.39” (34.5-35.3) dia. face. SJ7 c.50” (12.7) I.D. nylon bushing provided. Specifications are subject to change without notice. Oversize dimensions (refer to page K-28 for more details). 1-Gang, 5.25” x 3.50” (133.4 x 88.9). 2-Gang, 5.25” x 5.31” (133.4 x 134.9). 3-Gang, 5.25” x 7.12” (133.4 x 180.8). K-16 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Premarked Stainless Steel and Nylon Wall Plates EMERGENCY EMERGENCY S8MEV S1ME “EMERGENCY” Wall Plates Stainless Steel, Type 302/304, Standard Size Engraved Red Filled, Recessed Lettering Description 1-gang, 1 duplex, vertical mount. 2-gang, 2 duplex. 1-gang, 1 switch. EMERGENCY Catalog Numbers S8MEV S82MEV S1ME Red Nylon Mid-Size Hot Stamped, Recessed White Lettering Description 1-gang, 1 duplex, vertical mount. 1-gang, 1 switch. Catalog Numbers PJ8RMEV PJ1RME S82MEV EMERGENCY EMERGENCY PJ8RMEV PJ1RME Mid-size plate dimensions shown on page K-28. All lettering .25” (6.3) high. Premarked Wall Plates Dimensions in Inches (mm) www.hubbell-wiring.com K-17 Wall Plates Wall Plates Premarked Nylon Wall Plates Hot Stamped, Black Recessed Lettering ISOLATED GROUND Orange Nylon Standard Size Wall Plates Hot Stamped, Recessed Black Lettering “ISOLATED GROUND” IGP8 ISOLATED GROUND IGHPS1 ISOLATED GROUND 1.40" (35.6) I.D. HOLE Description 1-gang, 1 duplex. 1-gang, 1 duplex, no marking. 1-gang, rectangular opening. 1-gang, 1 opening for face diameter 1.36”-1.39” (34.5-35.3). 1-gang, 1 opening for 20A and 30A Twist-Lock® with face diameter 1.55”-1.58” (39.4-40.1). Catalog Numbers IGP8 P8OR IGHPS1 IGP7 IGP720 IGP7 ISOLATED GROUND 1.60" (40.6) I.D. HOLE IGP720 COMPUTER ONLY PJ8CO PJ8C Computer Only PJ82CO Nylon Mid-size Wall Plates Hot Stamped, Recessed Black Lettering “COMPUTER ONLY” Description Orange, 1-gang, 1 duplex. Orange, 2-gang, 2 duplex Ivory, 1-gang, 1 duplex. Blue, 1-gang, rectangular opening, Blue, 1-gang, 1 rectangular opening, no marking. Ivory, 1-gang, rectangular opening. Mid-size plate dimensions shown on page K-28. Catalog Numbers PJ8CO PJ82CO PJ8C SPJ26C SPJ26 PJ26C COMPUTER ONLY Premarked Wall Plates SPJ26C PJ26C K-18 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Selection Charts Wall Plates for Single Receptacles Description Smooth nylon, ivory. Group A Boss diameter 1.36” to 1.39” (34.5 to 35.3) One Two Gang Gang Group B Boss diameter 1.55” to 1.58” (39.4 to 40.1) One Two Gang Gang Group C Boss diameter 1.68” to 1.72” (42.7 to 43.7) One Two Gang Gang Group D Boss diameter 2.09” to 2.13” (53.1 to 54.1) One Two Gang Gang Group E Boss diameter 2.28” to 2.44” (57.9 to 62.0) Two Gang Catalog Numbers P7 – P720 – – – P724 P703 – – – P724X P703X – – P724B P703B – – – HBL9419 – S723 S703 Smooth nylon, brown. P7X – P720X – Smooth nylon, black. P7B – P720B – Cast aluminum. Stainless steel, 302/304, smooth. HBL7320 S7 – – HBL7320 S720 – – Anodized aluminum, smooth metal. A7 – – – – – A723 – – Solid brass, smooth metal. B7 – B720 – – – – – B701 – – HBL3394 S725 – S701 See appropriate catalog page for complete description of plate. Catalog Numbers of Receptacles in Groups A thru E Above Group A HBL7310B HBL7310BG HBL23000HG HBL23030 HBL4560 HBL4710 HBL4760 Boss Dia. HBL5251 HBL52CM61 HBL5261 HBL53CM61 HBL5361 HBL5461 HBL5552B HBL5661 HBL6810 HBL7210B HBL7250 HBL7310B HBL7310BG HBL7535 HBL7582 HBL8310 HBL8410 HBL8420 Group B HBL23CM10 HBL2310 HBL2320 HBL2330 HBL2340 HBL2410 HBL2420 HBL2430 HBL2440 HBL2450 HBL2460 HBL2510 HBL2520 HBL2530 HBL26CM10 HBL2610 HBL2620 HBL2630 HBL2640 HBL2650 HBL2710 HBL2720 HBL2730 HBL2740 HBL2750 HBL2760 HBL2770 HBL2810 HBL2820 HBL2830 HBL3330 HBL3330G HBL3430 HBL3430G HBL3520 HBL7410B HBL7410BG Group C HBL45105 HBL45205 HBL45305 HBL45905 Group D HBL7962 HBL9350 HBL9308 HBL9330 HBL9360 HBL9365 HBL9367 Group E HBL7301A HBL8330A HBL8350A HBL8430A HBL8450A HBL8460A HBL9430A HBL9450A HBL9460A Weatherproof Lift Cover Plates for WDL “Closed” and WDL “Open,” Single Gang Group B Boss diameter 1.55” to 1.58” (39.4 to 40.1) HBL7425WOA Group C Boss diameter 1.68” to 1.72” (42.7 to 43.7) HBL7424WO Group D Boss diameter 2.09” to 2.13” (53.1 to 54.1) – 50A Twist-Lock® Receptacles HBL7774WO Thermoplastic, WET LOCATIONS with cover “open,” gray. Thermoplastic, HBL74CM23WO HBL74CM25WOA HBL74CM24WO – HBL77CM74WO WET LOCATIONS with cover “open,” yellow. Cast aluminum, – HBL7420 HBL3393 HBL9420 HBL7770 WET LOCATIONS with cover “closed”. The “CS” versions of 50A Twist-Lock® receptacles will only fit these thermoplastic plates. *Plate painted red for Cat. HBL20443 only. Cat. No. HBL20405 plate for Cat. No. HBL20403 only. Dimensions in Inches (mm) www.hubbell-wiring.com 30A, 4W Hubbellock® Receptacles – – HBL20405 HBL20446* K-19 Wall Plate Selection Chart Group A Boss diameter 1.36” to 1.39” (34.5 to 35.3) HBL7423WO Wall Plates Wall Plates Security Wall Plates 1-Gang, White SWP1 Description Toggle switch. Duplex receptacle. GFCI/Style Line® device. Telephone or TV opening (.64”). Blank. SWP8 Catalog Numbers SWP1 SWP8 SWP26 SWP12 SWP13 2-Gang, White Description Two toggle switches. Two duplex receptacles. One switch, one duplex receptacle. Two rectangular openings. One duplex receptacle, one telephone or TV. One duplex receptacle, one blank. Double Blank SWP18 SWP82 SWP28 Catalog Numbers SWP2 SWP82 SWP18 SWP262 SWP812 SWP813 SWP23 3-Gang, White Description Two switches, one duplex receptacle. Catalog Number SWP28 Accessories SWPBIT Description Tamperproof screwdriver for security wall plates. Dimensions C A A 1-Gang (mm) 3.77” (95.76) Catalog Number SWPBIT B 5.52” (140.21) C .55” (13.97) D E F G H 3.37” (85.60) 5.13” (130.30) 1.00” (25.40) 4.63” (117.60) 2.88” (73.15) 2-Gang 5.52” (mm) (140.21) 5.52” (140.21) .55” (13.97) 5.13” (130.30) 5.13” (130.30) 1.00” (25.40) 4.63” (117.60) 4.63” (117.60) 3-Gang 7.39” (mm) (187.71) 5.52” (140.21) .55” (13.97) 7.00” (177.80) 5.13” (130.30) 1.00” (25.40) 4.63” (117.60) 6.50” (165.10) D E B G F H Specifications Security Wall Plates Tamper resistant wall plate single gang duplex receptacle shall be of the following construction: Cover plate: One piece #14 cold rolled zinc plated steel. Plate shall have a five stage baked white polyester powder enamel finish. Gloss: 85%, reflectance: 93%, hardness minimum: 2H and pass 600 hour salt spray test. K-20 Back plate: #10 cold rolled galvanized steel. Plate assembly shall use four (4) #8-32 X 1 /2” stainless steel T-20 TORX head screws with center pin reject. Plate must be UL listed to UL 514D and comply with the NEC®. www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Weatherproof Covers For Maximum In-Use Protection 3.50" (88.90 ) Cast Aluminum 1-Gang, Vertical Description Duplex receptacle. Rectangular, GFCI/Style Line® device. Catalog Numbers WP8M WP26M 6.13" (155.70) 1-Gang, Horizontal Description Duplex receptacle. Rectangular, GFCI/Style Line® devices. 3.38" (85.85) Catalog Numbers WP8MH WP26MH WP8M 3.50" (88.90 ) 1-Gang Receptacle, Vertical Description For face dia. of 1.55” to 1.58” (39.4-40.1). For face dia. of 2.09” to 2.13” (53.1-54.1). Catalog Numbers WP7D WP723D 4.31" (109.47) Non-Metallic High Impact Polycarbonate 1-Gang, Vertical Description Duplex or GFCI/Style Line® device. 5.13" (130.30) Catalog Number WP826MP WP26MH 5.00" (127.00 ) 1-Gang, Horizontal Description Duplex or GFCI/Style Line® device. Catalog Number WP826MHP 6.13" (155.70) Specifications All • NEMA 3R rating when used with the appropriate weatherproof outlet box which is intended for outdoor use primarily to provide a degree of protection against rain, sleet, and damage from external ice formation. Non-metallic • Impact resistant polycarbonate, an extremely durable thermoplastic. • Transparent cover provides visibility to the connection. • Box or device mount for flexibility of installation. • Gaskets are closed-cell foam. • Meets OSHA lockout/tagout requirements. • Latching covers hold securely. • Large cord openings. • Clearly marked UL and CSA logos. • Covers include gasket and mounting screws. Lids have gasketless design. • UL Listed/CSA Certified. • Devices not included. • Holes for padlocks are 1 /4” (6.4 dia.). • Drill points in four corners for box mounting. 3.38" (85.85) WP7D 3.00" (76.20 ) 6.13" (155.70) 3.38" (85.85) WP826MP 3.00" (76.20 ) 4.31" (109.47) 5.19" (131.83) WP826MHP Dimensions in Inches (mm) www.hubbell-wiring.com K-21 While In Use Weatherproof Plates Metallic • Die cast Alloy 360 copper-free® aluminum for maximum corrosion resistance and durability. Alloy 360 has less than .004% copper content. • Finish is baked aluminum lacquer. Wall Plates Wall Plates Weatherproof Plates for Receptacles and Switches Vertical, for FS/FD box mounting IP44 SUITABILITY For Receptacles With Face Diameters of 1.36”-1.39” (34.5-35.3) HBL7423WO Description Thermoplastic, WET LOCATIONS with cover “open,” gray. Thermoplastic, WET LOCATIONS with cover “open,” yellow. Cast aluminum, WET LOCATIONS with cover “closed.” Catalog Numbers HBL7423WO HBL74CM23WO HBL7420 For Receptacles With Face Diameters of 1.55”-1.58” (39.4-40.1) Description Thermoplastic, WET LOCATIONS with cover “open,” gray. Thermoplastic, WET LOCATIONS with cover “open,” yellow. Cast aluminum, WET LOCATIONS with cover “closed.” Cast aluminum, no lift cover, NOT weatherproof. HBL7425WOA HBL7424WO Catalog Numbers HBL7425WOA HBL74CM25WOA HBL7420 HBL7320 For Receptacles With Face Diameters of 1.68”-1.72” (42.7-43.7) Description Catalog Numbers Thermoplastic. WET LOCATIONS with cover “open,” gray. HBL7424WO Thermoplastic. WET LOCATIONS with cover “open,” yellow. HBL74CM24WO Cast aluminum. WET LOCATIONS with cover “closed.” HBL3393 Cast aluminum, no lift cover, NOT weatherproof. HBL3394 A fiber shield is furnished with HBL7420 plate. An effective means of weatherproofing toggle and lock type switches when this shield is used in combination with the plate. All weatherproof lift cover plates on this page are listed by Underwriters Laboratories, Inc. as “WDL Closed” for use in wet locations with cover closed and in damp locations. Weatherproof Covers For Single Receptacles On FS/FD Boxes Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED, for intermittent use in wet locations or use in damp locations. Those with suffix WO are listed for WET LOCATIONS with cover open in continuous use. All plates are gasketed and self-closing. Weatherproof Plates HBL7420 HBL7320 National Electrical Code Receptacles in Damp or Wet Locations. (a) Damp Locations. A receptacle installed outdoors in a location protected from the weather or in other damp locations shall have an enclosure for the receptacle that is weatherproof when the receptacle is covered (attachment plug cap not inserted and receptacle covers closed). An installation suitable for wet locations shall also be considered suitable for damp locations. A receptacle shall be considered to be in a location protected from the weather where located under roofed open porches, canopies, marquees, and the like, and will not be subjected to a beating rain or water run-off. (b) Wet Locations. (1) A receptacle installed in a wet location where the product intended to be plugged into it is not attended while in use (e.g., sprinkler system controllers, landscape lighting, holiday lights, etc.) shall have an enclosure that is weatherproof with the attachment plug cap inserted or removed. (2) A receptacle installed in a wet location where the product intended to be plugged into it will be attended while in use (e.g., portable tools, etc.) shall have an enclosure that is weatherproof when the attachment plug cap is removed. HBL3393 K-22 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Weatherproof Plates for Receptacles and Inlets For FS/FD Box Mounting IP44 SUITABILITY For Receptacles with Face Diameters of 2.28”-2.44” (57.9-62.0) Description Catalog Numbers Thermoplastic, 2-gang, WET LOCATIONS with cover “closed,” gray. HBL7777A Thermoplastic, 2-gang, WET LOCATIONS with cover “closed,” yellow. HBL77CM77A Thermoplastic, 2-gang, WET LOCATIONS with cover “closed,” gray. HBL7777 For Receptacles with Face Diameters of 2.09”-2.13” (53.1-54.1) Description Cast aluminum, WET LOCATIONS with cover “closed.” Cast aluminum, no lift cover, NOT weatherproof. Catalog Numbers HBL9420 HBL9419 HBL7777A For 50A Twist-Lock® Single Receptacles Description Thermoplastic, WET LOCATIONS with cover “open,” gray. Thermoplastic, WET LOCATIONS with cover “open,” yellow. Cast aluminum, WET LOCATIONS with cover “closed.” Galvanized Steel, fits 4” square, 4 11/16” or 2 gang box. Catalog Numbers HBL7774WO* HBL77CM74WO* HBL7770 HBL50SC HBL7774WO For 30A, 4 Wire Hubbellock® Receptacles Description Catalog Numbers Cast aluminum, WET LOCATIONS with cover “closed.” HBL20405 Cast aluminum, WET LOCATIONS with cover “closed,” red HBL20446 Cast aluminum, no lift cover, NOT weatherproof. HBL20406 Will fit FS/FD boxes having plate mounting holes on 3.25” x 3.75” (82.6 x 95.3) centers. Will only fit old style porcelain face devices. *Note: The “CS” versions of 50A Twist-Lock® will only fit these plates. Weatherproof Covers For Single Receptacles For Use On FS/FD Boxes HBL9420 Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED, for intermittent use in wet locations or use in damp locations. Those with suffix WO are listed for WET LOCATIONS with cover open in continuous use. All plates are gasketed and self-closing. Accessories 2.84" (72.1) 4.56" (115.8) 8-Holes .16" (4.1) Dia. .19" (4.8) DIA. 4 HOLES H U B B E L L 3.25" (82.6) 1.88" (47.8) 3.31" (84.0) 3.28" (83.3) HBL7349 HBL20405 Weatherproof Plates Description Catalog Numbers Sub-plate for mounting and weatherproofing flanged inlets such 7452 as HBL5278, HBL7556, HBL4716, etc. when used with a HBL7420 or HBL7425WOA type weatherproof plate. Adapter plate for mounting HBL7423WO, HBL7424WO, HBL7349 HBL7425WOA or HBL7420 plates to standard boxes. 2.00" (50.8) 1.56" (39.6) 2.13" (54.1) 3.63" (92.2) 7452 HBL7770 Typical Plate, Single Gang Dimensions in Inches (mm) www.hubbell-wiring.com K-23 Wall Plates Wall Plates Weatherproof Plates for Duplex, GFCI, Surge Receptacles and STYLE LINE® Devices IP44 SUITABILITY Duplex Plates For Vertical Mounting Description Thermoplastic, gray, for FS/FD box mounting. Thermoplastic, yellow, for FS/FD box mounting. Thermoplastic, gray, for device mounting. Thermoplastic, yellow, for device mounting. Catalog Numbers HBL5221 HBL52CM21 HBL5222 HBL52CM22 HBL5221 Duplex Plates For Horizontal Mounting Description Cast aluminum, for device mounting. Cast aluminum, for FS/FD box mounting. Zinc die cast, commercial grade, for device mounting. Catalog Numbers HBL5205WO HBL5206WO CWP8H HBL5206WO CWP8H GFCI, Surge and Style Line Devices Description Die cast aluminum, vertical position, device mount. Die cast aluminum, vertical position, FS/FD box mount. Zinc die cast, commercial grade, horizontal position, device mount. Weatherproof Plates WPFS26 Catalog Numbers WP26 WPFS26 CWP26H Note: All weatherproof plates are UL Listed for WET LOCATIONS WITH COVER CLOSED, for intermittent use in wet locations or use in damp locations. Those with Suffix WO are listed for WET LOCATIONS with cover open in continuous use. All plates are gasketed and self-closing. CWP26H K-24 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Weatherproof Switch Plates and Locking Covers Single 15A and 20A Straight Blade Receptacles and Accessories IP44 SUITABILITY Weatherproof Switch Plate Description Clear bubble plate, elastomer for use with all general purpose AC toggle switches and PresSwitch® switches. Fits FS/FD and standard boxes. Catalog Number HBL1795 Brass Locking Attachment for Switches Available in master keying and straight keying systems. Catalog Numbers HBL96061 HBL1795 HBL96062 HBL96060 HBL96061 shown with wallplate and switch (sold separately) Brass Locking Cover Plate Description Catalog Number Locking cover plate for single 15A & 20A straight blade receptacles HBL96067 and 15A Twist-Lock® receptacles. Straight cylinder type lock. All cylinder locks keyed alike. Accessories Description Weather shield plate, angle plate for duplex receptacles. Red rectangular jewel in metal frame for switch plates. Brass plated screw, standard slot, .38” (9.7) long. Stainless steel screw, standard slot, .38” (9.7) long. Brass tamper-proof screw .38” (9.7) long. Same as above except dull chrome to match S/S plates. Tamper-proof screwdriver for HBL7169 etc. Catalog Numbers HBL6187 HBL7298 HBL7341 HBL7341SS HBL7169 HBL7169DCH HBL7170 HBL96067 shown with receptacle (sold separately) HBL7298 HBL7341 Dimensions in Inches (mm) HBL7170 HBL7169 www.hubbell-wiring.com HBL6187 shown with receptacle and back box (sold separately) K-25 Weatherproof Switch Plates, Locking Covers and Accessories Description Straight keying (all locks alike) appropriate for most applications. Straight cylinder type lock, each HBL96061 ordered operates on the same key - all locks are keyed alike. Straight keying (individual). Straight cylinder type lock, each HBL96062 ordered operates on a different key. All locks are keyed differently and individually. This type cannot be master keyed. Master keying (individual). Cylinder type lock for master keying, each lock keyed individually with a master key to operate all locks. Also available in dull chrome finish to match stainless steel. Add “DCH” suffix to catalog number. Wall Plates Wall Plates Weatherproof Liftcover Plates For Flanged Inlets and Flanged Receptacles 2.84" (72.1) .19" (4.8) DIA. 4 HOLES IP44 1.09" (27.7) SUITABILITY WP1 Weatherproof Lift Cover Plate For 15 & 20A, 2 pole 2 wire & 3 wire Insulgrip® flanged inlets & flanged outlets. 4.56" (115.8) H U B B E L L Straight Blade, 2 Pole, 3 Wire Flanged Inlets HBL5278C HBL5378C HBL5478C HBL5678C 3.25" (82.6) 1.88" (47.8) 3.31" (84.0) Flanged Receptacles HBL5279C HBL5379C HBL5479C HBL5679C WP1 2.84" (72.1) 4.56" (115.8) H U B B E L L 1.88" (47.8) 3.31" (84.0) WP2 .19" (4.8) DIA. 4 HOLES 3.25" (82.6) 1.22" (31.0) Twist-Lock® 2 Pole, 2 Wire and 2 Pole, 3 Wire Flanged Inlets Flanged Receptacles HBL8815C HBL8809C HBL7524C HBL7526C HBL4716C HBL4715C HBL4586C HBL4585C HBL4786C HBL4785C WP2 Weatherproof Lift Cover Plate For 20 & 30A, 3, 4 & 5 wire Insulgrip flanged inlets and flanged outlets. Twist-Lock 2 pole, 3 wire; 3 pole, 4 wire; 4 pole, 4 wire; 5 wire Flanged Inlets Weatherproof Plates for Flanged Devices HBL2315 HBL2325 HBL2335 HBL2345 HBL2615 HBL2625 HBL2635 HBL2645 HBL2655 HBL3325C HBL2415 HBL2425 HBL2435 HBL2445 HBL2455 HBL2465 HBL2715 HBL2725 HBL2735 HBL2745 HBL2755 HBL2765 HBL2775 HBL2515 HBL2525 HBL2535 HBL2815 HBL2825 HBL2835 HBL3325C HBL3434C HBL3334C HBL7408C Flanged Receptacles HBL2316 HBL2326 HBL2336 HBL2346 HBL2356 HBL2616 HBL2626 HBL2636 HBL2646 HBL2656 HBL3326C K-26 www.hubbell-wiring.com HBL2416 HBL2426 HBL2436 HBL2446 HBL2456 HBL2466 HBL2716 HBL2726 HBL2736 HBL2746 HBL2756 HBL2766 HBL2776 HBL2516 HBL2526 HBL2536 HBL2816 HBL2826 HBL2836 HBL3326C HBL3335C HBL7409C Dimensions in Inches (mm) Wall Plates Wall Plates Technical Information Specifications Listings Non-Metallic Plates Metallic Plates Certification Nylon Plate Thickness Mounting Screw(s) Feature Operating Temperature Appearance UL Standard 514D, #E92074. UL Standard 514D, #E31999. CSA Standard C22.2 No. 42.1. CSA File LR18416. .06” (1.5). Brass (painted slotted screw head). Captive mounting screw hole. -40°C to 85°C. Smooth. 302/304 Stainless Steel (18% Chromium, 8% Nickel) Plate Thickness .04” (0.9) nominal. Mounting Screw(s) 302/304 stainless steel (18% chromium, 8% nickel). Slotted screw head. Appearance Smooth satin finish (without lines). Brass (70% Copper, 30% Zinc) Plate Thickness Mounting Screw(s) Appearance .04” (1.0). Brass (70% Copper, 30% Zinc). Slotted screw head. Smooth satin finish (without lines). Aluminum Plate Thickness Mounting Screw(s) Appearance .05” (1.3). Aluminum slotted head. Smooth satin finish, clear anodized (without lines). Brass Plated Steel Plate Thickness Mounting Screw(s) Appearance .03” (.8) nominal. Brass slotted head. Smooth satin finish (without lines), coated to inhibit oxidation. Chrome Plated Steel Plate Thickness Mounting Screw(s) Appearance .03” (.8) nominal. Zinc plate steel, slotted head. Smooth (without lines), coated to inhibit oxidation. Specifications Dimensions in Inches (mm) www.hubbell-wiring.com K-27 Wall Plates Wall Plates Technical Information Product Dimensions 5.25" (133.4) 4.88" (124.0) 4.50" (114.3) Standard Size 1-Gang 4.5” (114.3) x 2.78” (70.6) 2-Gang 4.5” (114.3) x 4.60” (116.8) 3-Gang 4.5” (114.3) x 6.41” (162.8) 4-Gang 4.5” (114.3) x 8.22” (208.8) 5-Gang 4.5” (114.3) x 10.03” (254.8) 6-Gang 4.5” (114.3) x 11.81” (300.0) 7-Gang 4.5” (114.3) x 13.63” (346.2) 8-Gang 4.5” (114.3) x 15.44” (392.1) Mid-Size 1-Gang 4.88” (124.0) x 3.13” (79.5) 2-Gang 4.88” (124.0) x 4.94” (125.5) 3-Gang 4.88” (124.0) x 6.75” (171.5) Jumbo 1-Gang 5.25” (133.4) x 3.50” (88.9) 2-Gang 5.25” (133.4) x 5.31” (134.9) 3-Gang 5.25” (133.4) x 7.12” (180.8) 2.78" (70.6) 3.13" (79.5) 3.50" (88.9) Wall Plate Openings and Mounting Dimensions #6-32 Oval Head Screws Typical 1.38" (35.1) Standard 1.56" (39.7) Mid-Size 1.75" (44.5) Jumbo 1.81" (46.0) TYP. 1.81" (46.0) TYP. 1.81" (46.0) TYP. 1.81" (46.0) TYP. 4.50" (114.3) Standard 4.88" (124.0) Mid-Size 5.25" (133.4) Jumbo Wall Plate Dimensions Duplex Recept. Device Mtg. Power Outlet Device Mtg. 2.50" (63.5) Standard Device Mtg. 2.38" (60.5) Box Mtg. 3.28" (83.3) Rectangular Devices 3.81" (96.8) Mtg. Specifications are subject to change without notice. K-28 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Custom Metal Wall Plates How To Select A Custom Metal Wall Plate Step 1 : Determine wall plate material and enter in box marked catalog number Determine number of gangs required and enter in box marked catalog number next to material. Smooth Metal Material Code Anodized Aluminum Brass plated steel Solid brass Chrome plated steel Stainless steel 302/304 AL BP BR CH SS WC* Code One-gang Two-gang Three-gang Four-gang Five-gang Six-gang Seven-gang Eight-gang 1 2 3 4 5 6 7 8 Step 2: Enter Catalog Number Number of Gangs Step 3: Select the custom Enter quantity. SS metal wall plate configuration. Refer to the custom wall plate configuration chart to select a configuration for each gang in the wall plate. Each configuration has a specific 3-digit code located in the right hand side of the chart on pages K-30–K-34. Enter this 3-digit configuration code in the corresponding box on the order form grid to match the position required on the finished custom wall plate. 4 Sample Order Form Catalog No. WCSS4 Quantity Code H* Position 1 001 Position 2 149 Position 3 008 Position 4 026 Custom Metal Wall Plates Item No. 1 2 *WC and H are preprinted on the distributor order form. Number to use for pricing. The 3-digit numbers listed at the upper right of the Sample Order Form (001, 149, etc.) represent the custom wall metal plate selected on the right. See Configuration Chart and Hubbell Configuration Selector Guide on pages K-30–K-34 for additional configuration choices. Dimensions in Inches (mm) www.hubbell-wiring.com K-29 Wall Plates Wall Plates Hubbell Custom Metal Wall Plate Configuration Chart 001 Switch. 058 One-gang .50” ID (12.7) Hole Box Mounted. 007 Single Receptacle. 091 Single Receptacle 1.595” ID (40.5) Hole. 2.78" (70.6) 4.53" (115.1) Available in smooth metal, standard size only up to and including 8-gang type 456 .375” (9.5) Dia. Round Box Mtd. 458 .500” (12.7) Dia. Round Box Mtd. 411 .635” (16.1) Dia. Round Box Mtd. 435 9 Pin Vertical Box Mtd. 008 Duplex Receptacle. 011 One-gang .635” ID (16.1) Hole Box Mounted with .50” ID (12.7) Nylon Bushing. 012 One-gang .635” ID (16.1) Hole Strap Mtd. incl. Strap with .50” ID (12.7) Nylon Bushing. 013 Blank Box Mount. 014 Blank Strap Mtd. incl. Strap. 026 Rectangular Opening. Custom Metal Wall Plates 055 One-gang .375” ID (9.5) Hole Strap Mtd. incl. Strap. 056 One-gang .375” ID (9.5) Hole Box Mounted. 057 One-gang .50” ID (12.7) Hole Strap Mtd. incl. Strap. 098 Single Receptacle 2.156” ID (54.7) Hole. 135 Vertical Mounted Louver. 149 Totally Blank (no mounting holes). Coax/Twinax and Modular Jack Openings 422 .505” (12.8) Dia. “D” Box Mtd. .436” (11.1) Flat Dia. 425 .505” (12.8) Dia. “D” Box Mtd. .473” (12) Flat Dia. 428 .580” (14.7) Dia. “D” Box Mtd. .550” (14) Flat Dia. 430 .755” (19.2) Dia. “D” Box Mtd. .731” (18.6) Flat Dia. 423 .505” (12.8) Dia. “D” Box Mtd. .436” (11.1) Flat Dia. 426 .505” (12.8) Dia. “D” Box Mtd. .473” (12) Flat Dia. 429 .580” (14.7) Dia. “D” Box Mtd. .550” (14) Flat Dia. 431 .755” (19.2) Dia. “D” Box Mtd. .731” (18.6) Flat Dia. 438 15 Pin Vertical Box Mtd. 295 25 Pin Vertical Box Mtd. 314 IBM Type Ppening Box Mounted. 415 IBM Type Opening with One .586” X .762” (14.9 X 19.3). Voice/Data Opening 470 .542” X .750” Vertical Box Mtd. (13.8 X 19.0). 473 .586” X .762” Vertical Box Mtd. (14.9 X 19.4). 476 .586” X .815” Vertical Box Mtd. (14.9 X 20.7). 479 .575” X .783” Vertical Box Mtd. (14.6 X 19.9). 471 .542” X .750” Vertical Box Mtd. (13.8 X 19.0). 474 .586” X .762” Vertical Box Mtd. (14.9 X 19.4). 477 .586” X .815” Vertical Box Mtd. (14.9 X 20.7). 480 .575” X .783” Vertical Box Mtd. (14.6 X 19.9). For detailed dimensions of the above configurations, see pages K-31 to K-34. K-30 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Hubbell Configuration Selector Guide Custom Metal Wall Plates 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw Configuration 001 (2) Mtg. Holes for #6-32 2.78" Screw (70.6) Configuration 014 4.53" (115.1) 4.53" (115.1) .925" (23.5) 2.38" (60.5) .406" (10.3) 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw 4.53" (115.1) 2.38" (60.5) Toggle Switch Plate. Blank Plate (Strap Mount). Configuration 007 2.78" (2) Mtg. Holes for #6-32 (70.6) Screw 4.53" (115.1) 1.405" DIA (35.7) .09" R (2.3) 2.64" (67.1) 2.38" (60.5) 3.81" (96.8) Single 15 or 20A Straight Blade Receptacle. 15A Twist-Lock® Receptacle. 2.78" (70.6) 4.53" (115.1) 1.34" DIA (34.0) .56" (14.2) Mtg. Hole for #6-32 Screw 2.78" (70.6) 4.53" (115.1) 3.28" (83.3) (2) Mtg. Holes for #6-32 Screw Configuration 011 2.78" (70.6) 3.28" (83.3) Single, .375” (9.5) Telephone (Box Mount). Configuration 012 (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 4.53" (115.1) 2.38" (60.5) Configuration 057 .50" DIA (12.7) Single, .635” (16.1) Telephone (Strap Mount). Single, .50” (12.7) Telephone (Strap Mount). Configuration 013 (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 3.28" (83.3) Configuration 056 .375" DIA (9.5) Single, .635” (16.1) Telephone (Box Mount). 4.53" (115.1) 4.53" (115.1) (2) Mtg. Holes for #6-32 Screw 3.28" (83.3) Blank Plate (Box Mount). Configuration 058 .50" DIA (12.7) Single, .50” (12.7) Telephone (Box Mount). Specifications are subject to change without notice. Dimensions in Inches (mm) www.hubbell-wiring.com K-31 Custom Metal Wall Plates (2) Mtg. Holes for #6-32 2.78" Screw (70.6) Configuration 055 Single, .375” (9.5) Telephone (Strap Mount). Duplex Receptacle. .635" DIA (16.1) .50" DIA (12.7) w/Bushing GFI/Rectangular Opening. .375" DIA (9.5) 2.38" (60.5) 4.53" (115.1) (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 2.38" (60.5) 4.53" (115.1) .635" DIA (16.1) .50" DIA (12.7) w/Bushing 4.53" (115.1) (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 1.53" 2.66" (38.9) (67.6) .41" (10.4) 1.32" (33.5) Configuration 008 Configuration 026 Wall Plates Wall Plates Hubbell Configuration Selector Guide Custom Metal Wall Plates Configuration 091 (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 2.78" (70.6) 1.595" DIA (40.5) 2.38" (60.5) 1.50" (38.1) 3.28" (83.3) .50" DIA (12.7) w/Bushing Single 20 or 30A Twist-Lock® Receptacle. Configuration 098 (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 2.78" .86" (70.6) (21.8) 1.02" (2) Mtg. Holes for #6-32 (259) Screw .89" (22.6) 4.53" (115.1) 2.50" (63.5) Single Receptacle, 30 or 50A Straight Blade, 3 Wire Power Outlet. 2.78" (70.6) 4.53" (115.1) Configuration 135 (2) Mtg. Holes for #6-32 Screw .71" (18.0) .762" (19.4) .586" (14.9) 2.78" (70.6) 4.53" (115.1) 4.53" (115.1) (2) Mtg. Holes for #6-32 Screw .505" DIA (12.8) Louvered Plate, Strap Mount. Configuration 149 2.78" (70.6) 2.78" (70.6) 4.53" (115.1) 4.53" (115.1) 3.28" (83.3) (2) Mtg. Holes for #6-32 Screw .436" (11.1) (2) TYP .505" DIA (12.8) 1.50" (38.1) Custom Metal Wall Plates 2.78" (70.6) .06" (1.5) R (2) Typ .09" (2.3) (4) Typ 4.53" (115.1) .45" (11.4) .89" (22.6) .98" (24.9) 3.28" (83.3) .13" (3.3) (2) Mtg. Holes for #6-32 2.78" Screw (70.6) 1.02" (25.9) .86" (21.8) .80" (20.3) (2) Mtg. Holes for #6-32 Screw 4.53" (115.1) 1.66" 1.86" (42.1) (47.2) 3.28" (83.3) 4.53" (115.1) Configuration 295 (2) Mtg. Holes for #6-32 Screw IBM Type and Modular Jack (Box Mount). Configuration 422 Single .505” (12.8) D-Hole (Box Mount). Configuration 423 Dual .505” (12.8) D-Holes (Box Mount). Totally Blank Plate. 2.78" (70.6) Configuration 415 .436" (11.1) 3.28" (83.3) 2.38" (60.5) Dual .635” (16.1) Holes (Box Mount). .80" (20.3)3.28" (83.3) 1.50" (38.1) .98" (24.9) 2.156" DIA (54.7) Configuration 411 .635" (16.1) DIA (2) Typ 4.53" (115.1) 4.53" (115.1) (2) Mtg. Holes for #6-32 Screw .473" (12.0) 3.28" (83.3) .505" DIA (12.8) RS232 Port Single 25-Pin (Box Mount). Configuration 314 2.78" (70.6) 4.53" (115.1) 3.28" (83.3) .71" (18.0) (2) Mtg. Holes for #6-32 Screw Single .505” (12.8) D-Hole (Box Mount). Configuration 426 .473" (12.0) 1.50" (38.1) .505" DIA (12.8) (2) Typ IBM Type (Box Mount). Configuration 425 Dual .505” (12.8) D-Holes (Box Mount). Specifications are subject to change without notice. K-32 www.hubbell-wiring.com Dimensions in Inches (mm) Wall Plates Wall Plates Hubbell Configuration Selector Guide Custom Metal Wall Plates 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw Configuration 428 2.78" (70.6) .550" (14.0) 4.53" (115.1) 3.28" (83.3) 1.50" (38.1) 3.28" (83.3) Single .580” (14.7) D-Hole (Box Mount). 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw 2.78" (70.6) .550" (14.0) 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw 4.53" (115.1) Dual .580” (14.7) D-Holes (Box Mount). Dual .50” (12.7) Round (Box Mount). Configuration 430 2.78" (70.6) .542" (13.8) .755" DIA (19.2) (2) Typ 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw .44" (11.2) 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw .06" R (1.5) .09" R (2.3) 3.28" (83.3) .443" (11.3) 1.50" (38.1) Dual .755” (19.2) D-Holes (Box Mount). Dual Modular Jack (Box Mount). Configuration 435 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw Configuration 473 .586" (14.9) 4.53" (115.1) .762" (19.4) 3.28" (83.3) Single 9-Pin RS232 (Box Mount). Single Modular Jack (Box Mount). Configuration 438 2.78" (70.6) 4.53" (115.1) 1.156" 1.32" (29.4) (33.5) Configuration 471 Custom Metal Wall Plates 3.28" (83.3) (2) Mtg. Holes for #6-32 Screw Single Modular Jack (Box Mount). .542" (13.8)-(2) Typ .750" (19.0) 4.53" (115.1) .06" R (1.5) .09" R (2.3) 1.01" (25.7) 4.53" .84" (115.1) (21.3) 3.28" (83.3) 2.78" (70.6) 1.50" (38.1) 3.28" (83.3) 4.53" (115.1) Configuration 431 .731" (18.6) 4.53" (115.1) Configuration 470 .750" (19.0) 3.28" (83.3) Single .755” (19.2) D-Hole (Box Mount). (2) Mtg. Holes for #6-32 Screw (2) Mtg. Holes for #6-32 Screw 4.53" (115.1) .731" (18.6) 2.78" (70.6) Configuration 458 1.50" (38.1) 3.28" (83.3) .755" DIA (19.2) 3.28" (83.3) (2) Mtg. Holes for #6-32 Screw .500" DIA (12.7) (2) Typ 4.53" (115.1) 1.50" (38.1) 3.28" (83.3) Dual .375” (9.5) Round (Box Mount). Configuration 429 .580" (14.7) D (2) Typ 4.53" (115.1) Configuration 456 .375" DIA (9.5) (2) Typ 4.53" (115.1) .580" DIA (14.7) (2) Mtg. Holes for #6-32 Screw 3.28" (83.3) Single 15-Pin RS232 (Box Mount). (2) Mtg. Holes for #6-32 Screw Configuration 474 .586" (14.9)-(2) Typ .762" (19.4) 1.50" (38.1) Dual Modular Jack (Box Mount). Specifications are subject to change without notice. Dimensions in Inches (mm) www.hubbell-wiring.com K-33 Wall Plates Wall Plates Hubbell Configuration Selector Guide Custom Metal Wall Plates 2.78" (70.6) 4.53" (115.1) (2) Mtg. Holes for #6-32 Screw Configuration 476 4.53" (115.1) .586" (14.9) .815" (20.7) 3.28" (83.3) 2.78" (70.6) (2) Mtg. Holes for #6-32 Screw .575" (14.6) .783" (19.9) 3.28" (83.3) Dual Modular Jack (Box Mount). 2.78" (70.6) 4.53" (115.1) 3.28" (83.3) (2) Mtg. Holes for #6-32 Screw Single Modular Jack (Box Mount). Configuration 477 .586" (14.9)-(2) Typ .815" (20.7) 2.78" (70.6) 4.53" (115.1) 3.28" (83.3) 1.50" (38.1) Configuration 479 Dual Modular Jack (Box Mount). (2) Mtg. Holes for #6-32 Screw Configuration 480 .575" (14.6)-(2) Typ .783" (19.9) 1.50" (38.1) Dual ModularJack (Box Mount). Custom Metal Wall Plates Specifications are subject to change without notice. K-34 www.hubbell-wiring.com Dimensions in Inches (mm)