Manufacturer's Approved Products List 1 of 15 WATERMAIN *All listed water appurtenances must comply to NSF 61 standards Product Pipe Up To and Including 300mm Diameter Type Specifications Ductile Iron Class 52 ANSI A21.51 (AWWA C151) Cement-mortor lined as per ANSI A21.4 (AWWA C104) Installed with polyethylene encasment as per ANSI A21.5 (AWWA C105) DR 18 Polyvinyl Chloride (PVC ) AWWA C900 Manufacturer Description/Model • Furnished with push-on Tyton® Joints as per ANSI A21.11 (AWWA C111) Canada Pipe Class 52 • Polyethylene encasement shall be installed in accordance with manufacturers specifications and instructions Ipex Blue Brute • Rubber gasketed bell and spigot joints National Pipe Dura Blue • Installed with 12 Gauge stranded tracer wire Next Polymers Aqualoc Diamond Plastics Corp. PR 235 Royal Pipe Systems C900 High Pressure Pressure Rating 235 psi Molecularly Oriented Poly Vinyl Chloride PVCo AWWA 909-09 Comments • Joints restrained where required by design and wrapped with corrosion protective system • Rubber gasketed bell and spigot joints Ipex Bionax • installed with 12 gauge stranded tracer wire. • Joints restrained where required by design and wrapped with corrosion protective system CSA B137.3 National Pipe Dura Blue Ipex Big Brute Next Polymers Aqualoc CSA B137.3 Pipe 400mm Diameter Polyvinyl Chloride (PVC) • Rubber gasketed bell and spigot joints • All joints restrained where required by design and wrapped with corrosion protective system •All PVC pipe to be installed with 12 gauge stranded tracer wire AWWA C905 Royal Pipe Systems Molecularly Oriented Poly Vinyl Chloride PVCo Pressure Rating 235 psi CSA B137.3 AWWA 909-09 Ipex www.peelregion.ca Bionax Last Update: 19/09/2016 Manufacturer's Approved Products List 2 of 15 WATERMAIN Concrete Pressure Pipe 400 to 500mm diameter AWWA C301 and C304 or AWWA C303 Forterra • Supplied with Bell and spigot joints • Joints sealed with wrap around cement mortar diapers • Shop drawings shall be supplied to the Region for review and approval prior to construction • Restrained where required by design Forterra Pipe 400mm Diameter and Larger *no longer accepting new submissions for products larger than 400mm Concete Pressure Pipe > 600mm diameter AWWA C301 and C304 Munro ANSI A21.51-02 (AWWA C151) Ductile Iron 400mm to Minimum Wall Thickness are as 600mm diameter follows for Special Class 52: inclusive 400mm - 10.2mm, 450mm 10.4mm, 500mm - 10.7mm, 600mm - 11.2mm Canada Pipe Special Class 52 www.peelregion.ca • Furnished with push-on Tyton® Joints Last Update: 19/09/2016 Manufacturer's Approved Products List 3 of 15 WATERMAIN Product Type Cast Iron and Ductile Iron Long Body Specifications Manufacturer ANSI A21.10 Sigma AWWA C110 Star Cement-mortor lined as per ANSI A21.4 (AWWA C104) Bibby ANSI A21.53 Ductile Iron Compact Fittings Short Body Polyvinyl Chloride (PVC) up to 200mm Diameter AWWA C153/C111 Star AWWA C907 • Furnished with push-on Tyton Joints as per ANSI A21.11 (AWWA C111) complete with T-304 stainless steel nuts and bolts • Polyethylene encasement shall be installed in accordance with manufacturers specifications and instructions or wrapped with corrosion protection system • Mechanical type ends AWWA C907 • Polyethylene encasement shall be installed in accordance with manufacturers specifications and instructions or wrapped with corrosion protection system Bibby • Complete with T-304 stainless steel nuts and bolts Ipex Royal CSA B137.2 Polyvinyl Chloride (PVC) 250mm & 300mm Diameter Sigma Comments SIP Industries Cement-mortor lined as per ANSI A21.4 (AWWA C104) Fittings Description/Model Galaxy Ipex • PVC Fittings to have fitting pipe restrainers • Joints restrained where required by design and wrapped with corrosion protection system • Complete with T-304 stainless steel nuts and bolts Royal CSA B137.3 Galaxy Victaulic • Acceptable for all AWWA approved pipes excluding PVC www.peelregion.ca Last Update: 19/09/2016 Manufacturer's Approved Products List 4 of 15 WATERMAIN Product Type Corrosion Prevention Protective Coatings System (3 stage system) For PVC Pipe Joint Restraints Specifications ANSI / AWWA C-217 Description/Model Denso System Petro Coating Systems PCS System RPH Distributors Advanced Corrosion Sys Petro guard System PVC Ring Lock (PVCgrip) 3500 Star Pipe Products Inc PVC Stargrip 4000 G2 ASTM F1674 Allgrip 3600 STD DWG 1-3-3A 1000-C Tufgrip Dual Wedge Clow Canada Series 90 Series 300, 350, 360 Smith-Blair 111 & 120 PV-Lok series PWM, Sigma Corp PWP and PWPF One-Lok SLC All complete with 304 stainless EBAA Iron Sales Inc. Megalug Series steel nuts & bolts Romac Industries Inc. Grip Ring UniFlange Series 1300C UniFlange Series Ford Meter Box Co. Inc. 1350C UniFlange Series 1500C ASTM F1674 For PVCO Pipe to PVC Fittings Manufacturer Denso North America Inc. 100mm to 300mm Comments Denso Paste, LT Paste, Profiling Mastic Applied to all metallic fittings and components PT150ST, PP04 and PM3ST TC Envirotape, Enviroprime and Enviromastic Paste PP04ST, Mastic PM3ST, Tape PTLT ▪Installed with concrete thrust blocks (on existing pipe only) in accordance with OPS standards ▪Corrosion protection system (as per specs) MJ fittings only Orange colour coded 1500 series Flange Adapter Restrainers Cam lock' 1500, 1600, 2000, 2600 PVC pipe used with Mech Joint/Push-On Fittings For PVC pipe bell Joints MJ retainer gland joint restraint Ford Meter Box Co. Inc. Uni-Flange UFR 1369 EBAA Iron Sales Inc. 2600 Sigma PV-Lok PWPF Star Pipe Products Inc 1000-1100-1200G2 PVC 3500C Series Tufgrip Dual Wedge Clow Canada Orange colour coded 1500 series 360c 400mm For PVCO Pipe Bell and Spigot Push-On Joints Clow Canada 390c Sigma PV-Lok PWPF Star Pipe Products Inc 1200R Series Tufgrip Dual Wedge Clow Canada ASTM F1674 EBAA Iron Sales Inc. Orange colour coded 1500 series 390c 1900 www.peelregion.ca Last Update: 19/09/2016 Manufacturer's Approved Products List 5 of 15 WATERMAIN 100mm to 300mm Sigma PV-Lok PWPF Star Pipe Products Inc PVC 3500C Series 1000-1100-1200G2 For PVCO Pipe Bell and Spigot Push-On Joints 400mm ASTM F1674 Uni-Flange UFR 1399 Ford Meter Box Co. Inc. Uni-Flange 1559 Tufgrip Dual Wedge Orange colour coded 1500 series Clow Canada 390c Sigma PV-Lok PWP Star Pipe Products Inc 1100 Series Ford Meter Box Co. Inc. UFR 1559 300c Clow Canada Tuf Grip Dual Wedge Orange colour coded 1500 series EBAA Iron Sales Inc. PWM Sigma Sigma One-Lok SLC PVC 3500 Series 100mm to 300mm Star Pipe Products Inc For PVCO Pipe to Mechanical Joint Fitting Ford Meter Box Co. Inc. Clow Canada 400mm Sigma Star Pipe Products Inc ASTM F1674 Connectors For Tracer Wire PVC 4000 G2 Series PVC 1000 G2 Series Joint Restraints For Ductile Iron Pipe 19MJ00 Uni-Flange 1500 300c Tuf Grip Dual Wedge PV-Lok PWM One-Lok SLCE PVC 1000 Series PVC 4000 G2 Series Star Pipe Products Inc Allgrip 3600 3000 Ford Meter Box Co. Inc. UniFlange Series 1390D, 1400D All complete with 304 stainless steel nuts & bolts Clow Canada approved for direct bury Uni-Flange 1309 Smith-Blair Sigma Corp EBAA Iron Sales Inc. Romac Industries Inc. Klick-It ll -PCS Ltd Dryconn_King Innov. R Stargrip Tufgrip Dual Wedge Series 400 111 & 120 One-Lok SLD Megalug Series Grip Ring Model C8816 Blue (Lug Type) www.peelregion.ca Orange colour coded 1500 series ▪Installed with concrete thrust blocks (on existing pipe only) in accordance with OPS standards ▪Corrosion protection system (as per specs) Orange colour coded 1500 series Flange Adapter 1100, 1500, 1600 connectors shall be used on all non-metallic wms, hydrant laterals & non metallic water services (std dwg 1-7-10) Last Update: 19/09/2016 Manufacturer's Approved Products List 6 of 15 WATERMAIN Product Type Manufacturer Specifications Dresser Piping Specialities Transition Couplings Couplings Flanged Couplings Complete with stainless steel nuts and bolts Style 38 Model 3501 Smith Blair Inc. Model 441, 471 to 476 'pipe lock' restrained coupling Tapped Couplings Smith Blair Inc. Dresser Piping Specialities Viking Johnson Robar Industries Victaulic Co.of Canada Ltd. Romac Industries Smith Blair Inc. Robar Industries STD DWG 1-7-1 AWWA C800 Style #44 Style #31 Hymax 2000 Flexible 1406 Axilock & Axiflex Teekay (Taylor Kerr ltd) Repair Straub Tadco Straub Flex/Open Manufacturing Straub Grip TPS-Cromer Ind Corp Hymax (Large Dia) FC1, FC2A Ford Meter Box Co. Inc. RCPP-x 501 straight transition Romac Industries Inc. coupling YNC Pipe Couplings YNC Pipe Couplings Inc. Clow Canada Insulating Couplings Style 53 and 153 Comments all wm couplings must be self restrainer type or installed with approved restrainers for 400mm watermains and larger Cambridge Victaulic Co.of Canada Complete with T-304 stainless Ltd. steel nuts and bolts TPS-Cromer Ind Corp Robar Industries Centre sleeves and end rings shall be shop coated Description/Model Ipex ductile housing with grade "M" gasket to be installed with split-ring restrainer/tie-rods Non restraint Non restraint, for existing pipe only to be installed with split-ring restrainer/tie-rods to be installed with approved restrainers restrained coupling, PVC x PVC all stainless steel Model 912 Style 127 MaxiDaptor 7406 #341.2 FCA 501 Series 90C Series 40C Model 416 1406 Blue Brute Tapped Coupling www.peelregion.ca ductile housing with grade "M" gasket for PVC pipe for DI pipe complete with insulating boot 150mm to 200mm PVC watermains in 19mm to 50mm service sizes, restrained Last Update: 19/09/2016 Manufacturer's Approved Products List 7 of 15 WATERMAIN Product Type Specifications Manufacturer STD DWG 1-6-1 & 1-6-2 AWWA C502 FM approved Hydrants Valve Box Valve Box Extension Mueller Canada Clow Canada ▪Hose nozzle and operating nut threads in accordance with Province of Ontario standards Clow-Bibby 135mm slide type, minimum 125mm inside diameter, 750mm upper section, 1200mm lower section, 6mm predrilled round hole with grommet for tracer wire in upper section Comments Canada Valve Century ▪Two 63.5mm diameter hose nozzles at 180 degree to each other ▪Base (boot) with 150mm mechanical connection end ▪Safety breakaway flanges and breakaway couplings ▪Painted to Region of Peel specified colours (red and silver) Description/Model McAvity M67B Concord D67-M Sentinel AVK Dry Barrel - Model 2700 ▪If a hydrant extension is required to adjust to the length of a hydrant barrel, it shall be obtained from the manufacturer supplying the hydrant and installed as per the manufacturers instructions ▪Clow split coupling for Brigadier and Concord hydrant extensions ▪Paint type and quality approved by the Region Mueller Canada A769 with guide plate Clow-Bibby Conqueror B.M.Inc. Star Pipe Products R.B. Agarwalla & Co. Sigma Corp VB 1100 & V800 - Lid Less than or equal to 1.8m total Clow Canada extension length Mueller Canada Sigma Corp. R.B. Agarwalla & Co. 300mm and 600mm increments Star Pipe Products www.peelregion.ca Last Update: 19/09/2016 Manufacturer's Approved Products List 8 of 15 WATERMAIN Product Type Specifications Crane Gate Valve 100mm 200mm dia. Mueller Canada Clow Canada 100mm to 300mm dia. Inclusive AWWA C509 400mm AWWA C509 Butterfly Valve Valves *no longer accepting new submissions for products larger than 400mm 600mm and larger AWWA C504 AVK Clow Canada Mueller Canada Kennedy Valve J & S Valve AVK Clow Canada Norriseal Mueller Canada DeZurik Val-matic Mueller Canada Val-matic Clow Canada AWWA C508 Bypass inlet/oulet ports to be min 25mm Suitable for continuous submerged conditions Zurn/Wilkins Mueller Canada Watts/Ames Mueller Canada Tapping Valve AWWA C509 AVK Clow Canada Pressure Regulating Valve Flow Control Valve Comments ▪Installed in above ground applications or in chamber only A-2360 ▪T-304 stainless steel nuts and bolts, corrosion protection system ▪ T-304 stainless steel nuts and bolts, corrosion protection Series 45 system 2639/2640 A-2360 ▪Open left (counter clockwise) Ken-Seal ▪50mm square operating nut Series 6600,6800,6900 ▪Inside non-rising stem Series 25, 45 ▪Fusion Bonded Epoxy (FBE) Coated M & H 4500 and 1450 ▪Actuators as per AWWA C504, Sec 4.5.8.5.3 Norris 200 Series ▪Actuators no less than 90% grease packed and totally Pratt sealed using gaskets, O-rings or similar means BAW ▪Open left (counter clockwise) American ▪Fusion Bonded Epoxy (FBE) Coated F6102 Mission Check Valve Detector Check Valve Description/Model ▪Rising spindle Gate Valve < 100mm dia. Resilient Wedge Gate Valve Manufacturer ▪ T-304 stainless steel nuts and bolts, corrosion protection Duo-Check series 125 system A-2600 ▪ Not to be used for backflow prevention unless two inline Swingflex and certified for that purpose Kenflex #506 Model 310 (up to 200mm) ▪ 25mm bypass in brass only for all DCV, per STD 1-3-9 Model EDCIV (250mm) ▪ meter supplied/installed by Region Meter Dept SS07F (200 & 250mm) 1000DCV (all sizes) T2360 A2360 ▪100mm diameter and larger Series 45 ▪All taps done by Region of Peel F6114 Cla-Val Series 90 ▪Model to be approved on a site specific basis Singer 106-PR, 206-PR ▪Provided with filter canisters ▪Provided with stainless steel rings ▪Model to be approved on a site specific basis ▪Provided with filter canisters ▪Provided with stainless steel rings Cla-Val Singer www.peelregion.ca Last Update: 19/09/2016 Manufacturer's Approved Products List 9 of 15 WATERMAIN Product Type Manufacturer Specifications Vent-O-Mat Val-Matic Floodsafe® (on all air valve installations) Watts Cla-Val Febco Series 900 or 9D Model 3 or R.P. 825Y Robar Industries 6606 Val-Matic Air Valves Crispin Air/Vacuum Release Air Release Backflow Preventer A.R.I Backflow Preventor Sampling Station Comments Vented Apco Air Release Description/Model RBX 143C, 145C, 149C Threaded 201C, 202C, 203C Threaded UL 10.1, UL 20.1, UL 41.1 D-040P D-040CV STD DWG 1-7-6 PVC Pipe All tapping sleeves to be supplied with stainless steel (passive 304) nuts and bolts DI and CI all stainless steel SST 663 H304 6606 Ford "Fast" with full liner all stainless steel Romac Industries Smith-Blair Inc Mueller Canada Robar Industries Ford Meter Box Co. Inc. Romac Industries SST Smith-Blair Inc 663 H304 H613 H304 SS H619 6606 SST Mueller Canada Tapping Sleeves Mueller Canada Robar Industries Romac Industries Asbestos Cement Pipe (rough barrel) Concrete Pressure Pipe with full liner Ford Meter Box Co. Inc. Ford "Fast" Ductile iron only 350mm and larger 300mm and smaller with full liner Ford Meter Box Co. Inc. Ford "Fast" all stainless steel TPS-Cromer Ind Corp Smith-Blair Inc all stainless steel-full seal Ez-Tap Plus serv/sad 663 Tapping sleeves to be supplied by the corresponding manufacturer ▪spec to CPP C-301 or C-303 ▪tap to be done by certified installer/welder www.peelregion.ca Last Update: 19/09/2016 Manufacturer's Approved Products List 10 of 15 WATERMAIN Product Type Specifications Manufacturer TPS-Cromer Ind Corp Robar Industries Mueller Canada Cambridge Brass Teekay (Taylor Kerr ltd) Straub-Tadco Inc All repair clamps to be supplied Romac Industries with stainless steel (passive YNC. Pipe Couplings 304) nuts and bolts Co. Repair Clamps Clow Canada Smith-Blair Inc. Romac Industries Dresser Bell Joint Repair Clamps Compression type - Stainless Steel Ball style Main Stops All brass water service fittings are 'no lead' (5 ppb) as per NSF 61 Annex F 19mm and 25mm same size inlet and pack joint Description/Model all stainless steel Concord D76R Series 200 274 516 60 and 160 Ford Meter Box Co. Inc. FB1000-X- NL Cambridge Brass Saddles to be used on all PVC Mueller Canada pipe A.Y. McDonald Mfg. for non metallic pipe use main stop with tracer wire hole do not use serrated jaw pipe wrenches to tighten main stops Series 301NL Teflon tape to be added to all listed main stops Series 300N Model 74701BT Series 301NL Torque shall be between 37 Cambridge Brass Joules and 47 Joules (27 ft-lb to Ford Meter Box Co. Inc. FB1000-X- NL 35 ft-lb) 40mm and 50mm Comments Ez-max Repair Clamp all stainless steel-full seal all stainless steel all stainless steel Teck with taper gasket Repair all stainless steel-full seal Straub Clamp LSS1 1 piece with full seal Mueller Canada Series 300N Cambridge Brass 301-A-HE(NL) Ford Meter Box Co. Inc. Ballcorp FB1000-XTW-Q (NL) www.peelregion.ca shipped with green colour coded thread protector do not use serrated jaw pipe wrenches to tighten main stops Non metallic pipe must be installed with tracer wire compatible appurtenances Last Update: 19/09/2016 Manufacturer's Approved Products List 11 of 15 WATERMAIN Product Type Specifications Copper Type K Soft Copper ASTM B88-49 STD DWG 1-7-1 Manufacturer Description/Model Comments Water Service ▪Due to outside diameter, sizing of pipe shall be one size larger, i.e. 25mm nominal size where 19mm is specified AWWA C901 CSA B.137.10 19mm - 50mm Polyethylene ▪Stainless steel inserts required, in accordance with manufacturers recommendations ▪12 gauge TWU stranded copper, light coloured, plastic coated tracer wire to be installed with all non-metallic pipe. Main stops, curb stops and service boxes must be designed to specifically accommodate TWU. (see Type for detailed infromation) STD DWG 1-7-1 www.peelregion.ca Last Update: 19/09/2016 Manufacturer's Approved Products List 12 of 15 WATERMAIN Product Type Specifications Description/Model D72 306 double bolt 2706 double strap 323 373 s.s. with band 403 Broad Band Cambridge 3412AS 3416AS FS313 Ford Meter Box Co. Inc FS323 Continental Ind. PVC Fast Tap Clow D72 Mueller H13428 H13431 H13433 Robar 1606 2606 403 Broad Band Cambridge 3412AS 3416AS Romac 306 double bolt Concord Daigle D71 Smith Blair 373 FS313 Ford Meter Box Co. Inc FS323 Continental Ind. PVC Fast Tap Clow D72 Robar 0406 Smith Blair 313 FS313 Ford Meter Box Co. Inc FS323 Romac 306 double bolt 403 Broad Band(Teck) Cambridge 3412AS 3416AS Smith Blair 323 Romac 306 double bolt 403 Broad Band(Teck) Cambridge 3412AS 3416AS PVC Class 150 PVC Class 160, Series 100 Service Saddles (must be double bolt, for all service taps) C.I. and D.I. Asbestos Concrete Manufacturer Comments Clow Romac Robar Smith Blair Manufactured to AWWA C301, C303 and C304 Welded outlets are to be as per pipe manufacturers recommendations Smith Blair www.peelregion.ca 362 single band double band single band double band with s.s bales with s.s bales single band double band T-304 stainless steel nuts and bolts Last Update: 19/09/2016 Manufacturer's Approved Products List 13 of 15 WATERMAIN Product Type Specifications Manufacturer Description/Model Comments B44 Series NL Z44 Series NL Ford Meter Box Co. Inc. BH 44-233G NL 4713T NL Curb Stops 19mm to 50mm Compression type - Stainless must be 'no steel Ball style lead' (5 ppb) as per NSF 61 Annex F Mueller Canada A.Y. McDonald Cambridge Brass for non metallic pipe use Curb Stop with tracer wire insert PCHG Clow Canada Service Box for 1.52m to 1.83m bury, use rod 1.14m long. Extension required if special depths are encountered (as per manufacturers recommendations). for non metallic pipe use Service Box with tracer wire hole Bibby T-304 Stainless Steel Model 76100T 74713T 202NL A726 A728 D2N D1N D1 D2 VSB1 VSB2 Non metallic pipe must be installed with tracer wire compatible appurtenances 19mm 40mm 40mm 19mm 19mm 40mm 19mm 40mm - 25mm - 50mm - 50mm - 25mm - 25mm - 50mm - 25mm - 50mm Conqueror BMI R.B. Agarwalla & Co. Sigma Corp. #8 Star Pipe Products SB-5001 SB-5002 Ford Meter Box Co. Inc. Curb Box EM2-XX-5X- Non metallic pipe must be installed with tracer wire TW compatible appurtenances Cascade Casing Spacers H15209N Cambridge Brass 202-H-HE NLseries Ford Meter Box Co. Inc. B44-XXX-TW-Q-NL Mueller Canada To be supplied with stainless steel rod and brass cotter pin H 15207N Cambridge Advanced Product Ssytems CCI Pipeline Systems 19mm - 25mm 40mm - 50mm CCS-1320-8 ▪Ultra high molecular weight polymer runners (or equivalent) Model 4810 SSI ▪Position of pipe within liner to be centered and restrained, sufficient to provide no less than 19mm clearance between Stailess steel bands & glass filled polymer runners CCS8 and CCS12 www.peelregion.ca ▪Watermain restrained laterally for the entire length of the liner ▪Sealed using wrap around rubber ends complete with stainless steel (T-304) banding Last Update: 19/09/2016 Manufacturer's Approved Products List 14 of 15 WATERMAIN Product Precast Chamber and components Type Concrete Standard Chamber Frame and Cover Water Tight Chamber Adjusment Units Anodes Manufacturer Specifications Bibby Ste. Croix Delta McCoy Foundary OPSD 401.01 - Type A, no lugs Mueller R.B. Agarwalla Sigma Corp. STD DWG 2-2-3 Mueller Bibby Ste. Croix OPSD 401.03, no lugs EJ Pre-Cast Concrete Polyethylene OPSS 1853 High Potential Magnesium ASTM B843-07 OPSS 442 Munro Forterra Pipe Ipex ICCC Comments ASTM 418-09 OPSS 442 Cast Iron, square frame with circular closed or open cover ▪Frame to be attached to the precast section as per STD DWG 2-2-3a or 2-2-3b Moduloc Lifesaver 32D5GG Bren Tech Maple Agencies High Purity Zinc Description/Model STD DWG 1-1-5, 1-1-6, 1-1-7 Con Cast Pipe M Con Pipe & Products Forterra Pipe CSA A257.4 Munro Concrete OPSS 1351 Products 3m AWG#10/7 strand copper wire c/w RWU-90 insulation Exothermal Ind.MA-32 Size of anode as per design Intergity Anode Corporation * water appurtenances larger than 400mm are no longer accpeted * Not accepting product submissions for the following categories at this time: Transition Couplings Flanged Couplings Standard MH Frame & Covers Hydrants Valve Boxes & Extensions Service Boxes PVC Pipe -water Joint Restraints Tapping Sleeves Repair Clamps Service Saddles www.peelregion.ca Last Update: 19/09/2016