TYPE:
CATALOG #:
SPEC GRADE
NOTES:
LS Series
6 and 12 Volt Steel Enclosure
Suggested Specification
• Each unit comes with two (2) EF-18 heads with 9 watt high
intensity incandescent lamps (standard). One or three heads
available as options
• Constructed of 20-gauge steel with an off-white baked enamel
finish
• Available with sealed, maintenance-free Nickel-Cadmium, or LeadCalcium batteries
• Power Requirements: 120/277 VAC 60Hz, 0.3/0.15A
• PulsePlus Charger circuitry offers 120/277 VAC 60 Hz., 0.3/0.15A
(other inputs available), fused output circuit(s), dual diagnostic
indicator lights, temperature compensation, sealed relay, low
voltage battery disconnect, brownout protection and lock out
(automatic battery connect)
• Removable front panel
• UL Listed. Complies with NEC, Life Safety Code and OSHA.
Approved for use in the Commonwealth of Pennsylvania and
New York City
• 3-year full warranty, excluding lamps and fuses
Supply and install the Emergi-Lite® LC Series LSC_________,
LSE_________, LSM_________ or LC _________in 6 or 12 volt, single
or double heads, with electrically compatible remote fixtures or exit
signs as indicated on the plans. The emergency lighting unit shall be
an architecturally designed, self-contained fixture including sealed,
maintenance-free battery.
Accessories (order as a separate item)
SUFFIX
DESCRIPTION
Mounting bracket (cabinet A)
B1
Mounting bracket (cabinet B)
B2
Mounting shelves (cabinet B)
MP3-EG
Mounting shelves (cabinet C)
MP6-EG
Wire Guard (cabinet A)
WG2-E
Wire Guard (cabinet B & cabinet C)
WG3-E
Dimensions
Dimensions are approximate and subject to change.
TYPE LSC to be supplied with Long Life Nickel-Cadmium battery.
TYPE LSE to be supplied with Long Life Pure Lead battery.
TYPE LSM to be supplied with Lead Calcium battery.
TYPE LC to be supplied with Lead Calcium (Immobilized Electrolyte)
battery. The unit shall supply the rated load for a minimum of 90 minutes
or to 871/2% of rated battery voltage. The unit shall be rated 120/277Vac,
60 Hz and be UL924 listed. The unit charger shall utilize an integrated
circuit which samples the batter y in relation to its temperature, state
of charge and input voltage fluctuations. The charger shall be current
limited, temperature compensated, short-circuit protected and reverse
polarity protected. The unit shall be furnished with an electronic lockout
circuit which will connect the battery when the AC circuit is activated,
and an electronic brownout circuit which will activate the unit when utility
power dips below 80-85% of nominal voltage. A low voltage battery
disconnect circuit shall be provided and will disconnect the load and
circuitry from the battery when it reaches 871/2% of its nominal voltage.
The unit shall be capable of full recharge in compliance with UL924
specifications. The unit shall be furnished with sealed dusttight relay, a
test switch and dual diagnostic LED indicator lights (hi-charge and AC
pilot). The cabinet shall be constructed of steel (see dimension chart
for gauge) in off-white baked enamel color. A removable front panel
shall be furnished to provide full access for ease of installation and
servicing. A and B cabinet units shall have a universal mounting cluster.
All cabinets shall be furnished with1/2” conduit knock-out, rear keyhole
mounting slots (bracket or shelf available as an option) and provisions
for mounting up to 3 heads on cabinet. Unit will be furnished with two
EF18 lighting heads constructed of impact resistant, flame retardant
thermoplastic material complete with 9 watt high intensity incandescent
lamps. Fused output terminals shall be provided for ease of remote
lamp connection. Every LS and LC Series unit shall be fully warranted
for three years, subject to proper installation and maintenance.
The unit shall be Emergi-Lite® model:
.
Unit Warranty*
Unit equipment (except battery and lamps): 3-year limited warranty
Battery Warranty*
Unit batteries are warranted as follows:
EF18
Cabinet
Size
EF9
Dimensions
a
b
12-3/4”
c
d
A
14-5/8” // 13”
3-1/8”
8-1/2”
B
16-3/8” // 14-3/4” 16-1/8”
5-7/16”
10-1/4”
C
18-3/8” // 16-3/4” 16-1/2”
7-1/4”
12-1/4”
Sealed Nickel Cadmium: 12LSC – 10year life expectancy, 5-year Full
Warranty, plus 5-year pro rata warranty.
Sealed Long Life Lead: 12LSE – 12-year life expectancy, 5-year Full
Warranty, plus 5-year pro rata warranty.
Sealed Lead Calcium (Free Electrolyte): 12LC – 12-year life
expectancy, 5-year Full Warranty, plus 5-year pro rata warranty.
Sealed Lead Calcium: 12LSM – 8-year life expectancy, 3-year Full
Warranty, plus 3-year pro rata warranty.
*Subject to proper installation and maintenance
COMMERCIAL
Features
Furnished standard with two 9 watt High Intensity Incandescent lamps.
UNIT EQUIPMENT - NO REMOTE CAPABILITY
Nickel-Cadmium
6
LSC18-2
Watts to 87-1/2% of rated battery voltage*
1-1/2 hrs
2 hrs
4 hrs
4 hrs
18
12
9
6
Lead-Calcium
6
LSM18-2
12
Sealed Maintenance-Free Battery Types
D.C. Voltage
Model Number
12
10
7
# of Load Fuses Cabinet size
1
A
1
A
SPEC GRADE
Unit Rating
UNIT EQUIPMENT - WITH REMOTE CAPABILITY
1-1/2 hrs
Nickel-Cadmium
3 hrs
8 hrs
LSC25-2
25
18
9
–
1
A
12
12LSC36-2
36
21
12
6
1
A
12
12LSC50-2
50
36
18
10
1
A
24
24LSC100-2
100
73
37
20
2
B
6
LSM27-2
27
18
10
6
1
A
6
LSM36-2
36
25
14
7
1
A
6
LSM54-2
54
37
21
12
1
A
6
LSM81-2
81
54
36
18
2
B
6
LSM110-2
110
72
40
24
2
B
6
LSM162-2
162
108
60
48
2
C
6
LSM200-2
200
144
80
48
2
C
12
12LSM36-2
36
25
14
7
1
A
12
12LSM54-2
54
37
21
12
1
A
12
12LSM110-2
110
72
40
24
2
B
12
12LSM162-2
162
108
60
36
2
C
12
12LSM220-2
220
144
80
48
2
C
* National Electrical Code Specification
= New York City Approved
How to Order
COLOR
Blank= O
ff
white
B= Black
enclosure
SERIES/CAPACITY
LSC Series
LSC18= 6V-18W Ni-Cd
LSC25= 6V-25W Ni-Cd
12LSC36= 12V-36W Ni-Cd
12LSC50= 12V-50W Ni-Cd
12LSC72= 12V-72W Ni-Cd
LSM Series
LSM18= 6V-18W Lead-Calcium
LSM27= 6V-27W Lead-Calcium
LSM36= 6V-36W Lead-Calcium
LSM54= 6V-54W Lead-Calcium
LSM81= 6V-81W Lead-Calcium
LSM110= 6V-110W Lead-Calcium
LSM162= 6V-162W Lead-Calcium
LSM200= 6V-200W Lead-Calcium
12LSM36= 12V-36W Lead-Calcium
12LSM54= 12V-54W Lead-Calcium
12LSM105= 12V-105W Lead-Calcium
12LSM110= 12V-110W Lead-Calcium
12LSM162= 12V-162W Lead-Calcium
12LSM220= 12V-220W Lead-Calcium
# OF LAMPS
-0= No head
-1= 1 head
-2= 2 heads
-3= 3 heads
HEAD STYLE
LAMP TYPE/WATTAGE
OPTIONS
Blank= EF18 (PAR 36 plastic)
28= EF28 (PAR 36 metal)
9= EF9 (mini plastic)
10= EF10 (small plastic MR16)
150= EF150 (MR16 lamp heads)
Blank_= 6V-9W and
12V-9W
incandescent
wedge base
H_= Halogen bi-pin
I_= Incandescent
DC-bayonet
U_= Incandescent
sealed-beam**
X_= Halogen sealed-beam**
Z_= Incandescent wedge
M_= Halogen MR16*
LA= 6V-4W, MR16 LED*
LG= 12V-4W, MR16 LED*
LL= 24V-4W, MR16 LED*
LI= 12V-5W, MR16 LED*
LJ= 12V-6W, MR16 LED*
Blank= No options
-AD= Advanced Diagnostics (audible)*
-ADNA= A dvanced Diagnostics
(non-audible)*
-NEX= NEXUS® wired
(consult your sales representative)*
-NEXRF= NEXUS® wireless (consult
your sales representative)*
-V= Voltmeter
-A= Ammeter
-CP= Cord and plug 120V only**
-D1= Time Delay (5 minutes)
-D2= Time Delay (10 minutes)
-D3= Time Delay (15 minutes)
-E= Cord and plug 277V
* Available with EF10 & EF150 only
** Available with EF18 & EF28 only
NOTE: For a complete list of available
lamp types, please refer to the
lamp data on pages 146-147
* Minimum lamp load required: 20% of unit
capacity. Not available with 12V-72W Ni-Cd
**Standard cord is 3 ft.
Example: BLSC18-110LA-AD
All information and specifications contained in this specsheet are subject to change due to engineer design, errors and omissions.
Illustrations and diagrams within this specsheet may vary from actual products.
2014© Thomas & Betts Limited. All rights reserved.
COMMERCIAL
Lead-Calcium
2 hrs
6