TYPE:
CATALOG #:
NOTES:
INDUSTRIAL
IL Series
6, 12 & 24 Volt Heavy Duty Industrial
Emergency Power Unit
Features
Suggested Specification
• Each unit comes with two (2) impact resistant, flame retardant
thermoplastic EF-18 lamp heads with 9 watt high intensity
incandescent lamps (standard)
• All 20 gauge in steel construction ASA61 gray baked enamel finish
• Available with sealed, maintenance-free Nickel-Cadmium, LeadCalcium
(Free Electrolyte) or Lead-Calcium batteries
• PulsePlus Charger circuitry offers 120/277 volt input 60 Hz,
0.3/0.15A (other inputs available), fused output circuit(s), dual
diagnostic indicator lights, temperature compensation, sealed relay,
low voltage battery disconnect, brownout protection and lockout
(automatic battery connect)
• Provision for mounting to any standard 4” octagonal electrical
box. The hinged and lockable front door allows easy access for
maintenance and provides security against unauthorized access
and vandalism
• UL924 Listed. Complies with NEC, Life Safety Code and OSHA.
Approved for use in the Commonwealth of Pennsylvania
• 3-year limited warranty
Supply and install Emergi-Lite® Series ILSC_________, ILSE_________,
ILSM_________ , ILC_________ in 6 volt, single or double heads, with
electrically compatible remote fixtures or exit signs as indicated on
the plans. The emergency lighting unit shall be a self-contained fixture
including sealed, maintenance-free battery. TYPE ILSC to be supplied
with long life Nickel-Cadmium battery. TYPE ILSE to be supplied with
long life pure lead battery. TYPE ILSM to be supplied with lead calcium
battery. TYPE ILC to be supplied with lead calcium (free electrolyte)
battery. The unit shall supply the rated load for a minimum of 90 minutes
or to 871/2% of rated batter y voltage. The unit shall be rated 120/277
Vac, 60 Hz and be UL924 Listed.
Detailed warranty terms located at: www.emergi-lite.com/usa/files/EL_Warranty.pdf
Dimensions
Dimensions are approximate and subject to change.
10-3/8”
16-1/2”
Knockouts for 1/2” Conduit: -2 each side, 1 rear (7/8” Dia) knockout
16-1/8”
4-3/4”
Accessories (order as a separate item)
SUFFIX
DESCRIPTION
Mounting bracket
B2
Mounting shelves (gray)
MP3-GY
Wire Guard
WG3-E
Unit Warranty*
Entire unit (excluding lamps and fuses) carries a 3-year Full Warranty.
Battery Warranty*
Unit batteries are warranted as follows:
Sealed Nickel-Cadmium: ILSC – 10-year life expectancy, 5-year Full
Warranty, plus 5-year pro rata warranty.
Sealed Long Life Lead: ILSE – 12-year life expectancy, 5-year Full
Warranty, plus 5-year pro rata warranty.
Sealed Lead Calcium (immobilized electrolyte): ILC – 12-year life
expectancy, 5-year Full Warranty, plus 5-year pro rata warranty.
Sealed Lead Calcium: ILSM – 8-year life expectancy, 3-year Full
Warranty, plus 3-year pro rata warranty.
*Subject to proper installation and maintenanceé.
The unit charger shall utilize an integrated circuit which samples
the battery in relation to its temperature, state of charge and input
voltage fluctuations. The charger shall be current limited, temperature
compensated, short-circuit protected and reverse polarity protected.
The unit shall be furnished with an electronic lockout circuit which will
connect the battery when the AC circuit is activated, and an electronic
brownout circuit which will activate the unit when utility power dips below
80-85% of nominal voltage. A low voltage battery disconnect circuit shall
be provided and will disconnect the load and circuitry from the battery
when it reaches 871/2% of its nominal voltage. The unit shall be capable
of full recharge in compliance with UL924 specifications. The unit shall be
furnished with sealed dust-tight relay, a test switch and dual diagnostic
LED indicator lights (hi-charge and AC pilot). The entire cabinet shall be
constructed of 20 gauge steel in ASA61 grey baked enamel finish. The
door shall be hinged to provide full access to the battery and charger for
ease of installation and servicing. The door shall be lockable to prohibit
unauthorized entry or vandalism. Unit shall have rear keyhole mounting
slots and will be designed to mount directly to any standard 4” octagonal
electrical box. Unit shall have provisions for mounting up to three lighting
heads on the cabinet. Unit shall be furnished with two EF18 lighting
heads constructed of impact resistant, flame retardant thermoplastic
material complete with 9W High Intensity Incandescent lamps. Fused
output terminals shall be provided for ease of remote lamp connections.
Every IL Series unit shall be fully warranted for three years, subject to
proper installation and maintenance.
The unit shall be Emergi-Lite® model:
.
Unit Rating Chart
Furnished standard with two 9 watt High Intensity Incandescent lamps.
Sealed Maintenance-Free Battery Types D.C. Voltage
Nickel-Cadmium
Long Life Lead
Lead-Calcium
Model Number
6
6
6
ILSC18-2
ILSE18-2
ILSM18-2
6
12
12
24
6
6
6
6
6
12
12
12
12
24
24
6
6
6
6
6
6
6
12
12
12
24
ILSC25-2
12ILSC36-2
12ILSC50-2
24ILSC72-2
ILSE27-2
ILSE36-2
ILSE54-2
ILSE80-2
ILSE110-2
12ILSE36-2
12ILSE54-2
12ILSE72-2
12ILSE110-2
24ILSE72-2
24ILSE110-2
ILC87-2
ILC100-2
ILSM27-2
ILSM36-2
ILSM54-2
ILSM81-2
ILSM110-2
12ILSM36-2
12ILSM54-2
12ILSM110-2
24ILSM110-2
1-1/2 hrs
18
18
18
Watts to 87-1/2% of rated battery voltage*
2 hrs
4 hrs
8 hrs
12
6
–
11
6
–
12
7
–
# of Load Fuses
–
–
–
UNIT EQUIPMENT - WITH REMOTE CAPABILITY
Nickel-Cadmium
Long Life Lead
Lead-Calcium (Immobilized Electrolyte)
Lead-Calcium
25
36
50
72
27
36
54
80
110
36
54
72
110
72
110
87
100
27
36
54
81
110
36
54
110
110
18
21
36
42
16
24
36
65
72
24
37
48
74
48
74
70
77
18
25
37
54
72
25
37
72
72
9
12
18
24
10
13
20
35
40
13
21
26
43
26
43
41
47
10
14
21
36
40
14
21
40
40
–
6
10
12
6
7
11
19
24
7
10
14
21
14
21
24
24
6
7
12
18
24
7
12
24
24
–
1
1
2
–
–
–
–
–
1
1
2
2
2
2
–
–
–
–
–
–
–
1
1
2
2
* National Electrical Code Specification
How to Order
SERIES/VOLTAGE
UNIT CAPACITY
ILC= 6V
87= 87W Lead-Calcium
100= 100W Lead-Calcium
ILS= 6V
C18= 18W Ni-Cd*
C25= 25W Ni-Cd*
E18= 18W Long Life Lead
E27= 27W Long Life Lead
E36= 36W Long Life Lead
E50= 50W Long Life Lead
E80= 80W Long Life Lead
E110= 110W Long Life Lead
M18= 18W Lead-Calcium
M27= 27W Lead-Calcium
M36= 36W Lead-Calcium
M54= 54W Lead-Calcium
M81= 81W Lead-Calcium
M110= 110W Lead-Calcium
12ILS= 12V
C36= 36W Ni-Cd*
C50= 50W Ni-Cd*
E36= 36W Long Life Lead
E54= 54W Long Life Lead
E80= 80W Long Life Lead
E110= 110W Long Life Lead
M36= 36W Lead-Calcium
M54= 54W Lead-Calcium
M110= 110W Lead-Calcium
24ILS= 24V
C100= 100W Ni-Cd*
E72= 72W Long Life Lead
E110= 110W Long Life Lead
M110= 110W Lead-Calcium
C72= 72W Ni-Cd*
* Not available with sealed beams
# OF HEADS
-0= No head
-1= One head
-2= Two heads
-3= Three heads
LAMP
OPTIONS
Blank= 6V-9W, 12V-9W,
24V-9W incandescent
wedge base
H_= Halogen bi-pin
Z_= Tungsten incandescent
U_= Tungsten sealed beam
X_= Halogen sealed beam
-AD= Advanced Diagnostics (audible)*
-ADNA= Advanced Diagnostics (non-audible)*
NEX= NEXUS® wired
(consult your sales representative)*
NEXRF= NEXUS® wireless
(consult your sales representative)*
-A= Ammeter
-V= Voltmeter
-CP= Cord and plug 120V only
-D1= Time Delay (5 minutes)
-D2= Time Delay (10 minutes)
-D3= Time Delay (15 minutes)
-E= Cord and plug 277V**
-OW= Off-white cabinet and heads
NOTE: F or a complete list of available lamp
types, please refer to the lamp data
on pages 146-147
* Minimum lamp load required: 20% of unit capacity
Option not available with 24V-100W Ni-Cd units
** S tandard cord is 3 ft
Example: ILC87-2HB-A
All information and specifications contained in this specsheet are subject to change due to engineer design, errors and omissions.
Illustrations and diagrams within this specsheet may vary from actual products.
2016© Thomas & Betts Limited. All rights reserved.
INDUSTRIAL
UNIT EQUIPMENT - NO REMOTE CAPABILITY