CV3 Series
Thermoplastic LED Exit Signs
Ordering Guide
CV
3 R
A
W-2C
Series
Options
Housing
Finish
Faces
3- Universal Single/Double Face
W - White
B - Black
Letter Color
R- Red
G- Green
Operation
A - AC Only
E - Emergency
Options
COLLECTION
CV3 thermoplastic exit signs feature an attractive, high impact,
UV stable, injection molded enclosure. CV thermoplastic exits
offer bright and even LED illumination, low energy consumption,
universal chevrons, universal back / ceiling / end mounting, and
contractor-friendly quick installation. Emergency version also
includes high temperature, long life nickel-cadmium battery.
Standard Features
All Models
• UV-stable thermoplastic housing
• Compact, low-profile design
• Easy to install
• Long-life LED lamps
• Bright, even illumination
• Red and green letters
• Universal single/double face
• White or black finishes
• Push-in wiring connectors
• Universal end/ceiling/wall mount
• Universal snap-in, chevron arrows
• Damp location listed
• 120/277VAC, 60 Hz operation
Emergency Models
• Solid-state charger with low voltage disconnect
• Maintenance-free NiCad battery
• 90 minute emergency operation
• Test switch and AC-On light
• Temperature range: 0°C to 40°C (32°F to 104°F)
• UL 924 Listed
• Available with Spectron® self-diagnostic/self-testing
electronics option
I
-2C
-FAP
-FM
-AF
-DC -24K
(1)
(2)
(3)
(4)
(5)
(6)
Spectron self-diagnostic/self-testing electronics (1)
2-circuit operation (2)(6)
Fire alarm panel interface (3)(5)(6)
Flasher module (1)(5)
Audible/Flasher module (1)(5)
Remote DC operation (2)(4)(6)
220-240VAC, 60 Hz operation
Available on emergency models only.
For use with AC models only.
Operates with 24-volt AC or DC fire alarm panels.
For emergency illumination of sign from remote 6-24 VDC power sources.
-FAP, -FM, and -AF options may not be specified together.
-DC option may not be specified with -2C or -FAP.
Accessories
PMLXB
PMLXW
WGLX WG-MLT
WGLXC
WGLXE
VRS3 Pendant mounting kit (black)
Pendant mounting kit (white)
Wire guard (Wall mount)
Wire guard (Wall mount)
Wire guard (Ceiling mount)
Wire guard (End mount)
Vandal resistant shield
Dimensions
7”
(17.8 cm)
53/16”
(13.2 cm)
93/4”
(24.8 cm)
9”
(22.9 cm)
13”
(33.0 cm)
13/4”
(4.4 cm)
CV3 Series
Specifications
Thermoplastic LED Exit Signs
Construction
Sign:Housing,exitface(s)andmatchingcanopyconstructed
offlame-rated,UVstablethermoplastic
Sign Finish:Texturedbrightwhiteorblack
Diffuser:.030Polystyrene
Diffuser Finish:Frequency-matchedsilkscreenedcoating
providesoptimizedLEDlightoutput
Exit Face Design
Letters:6”letters,3/4”stroke
Directional Arrows:Snap-inchevrontype
Illumination
All Models:redorgreenhigh-outputLEDs
Rated lamp life:Inexcessof20years
Brightness Index:ExceedsULrequirements
Illumination Uniformity:ExceedsULrequirements
Installation
Mounting:Signmountsto31/2”,4”octagon,or4”squareoutlet
boxesandstandardplasterrings.
Wall Installations:Backplateprovidesaknockoutpattern
formountingtooutletbox.Keyholeknockoutprovidedfor
securinghousingtowallsurface.
Ceiling or End Installations:Mountingcanopyprovidedwith
allmodels.Canopymountstooutletboxesbymeansof
mountingplatesupplied.Exithousingsnapstocanopy.
Wiring:Pre-strippedACinputpigtailleadsprovided.Push-in
wireconnectorssuppliedformakingACconnections.All
wiringdressesintoformedwirewaysinexithousing.
Operating Temperature range:0°Cto40°C(32°Fto104°F).
Electronics
Input:120/277VAC,60Hz(allmodels)
Built-in Protection:Surge,transientandlowbatteryvoltage
protection
Emergency Operation Module(InternallyMounted)
Charger:Solid-state,constantcurrenttype
Transfer:Solid-statedesign
Battery Recharge Cycle:PerULtimestandards
Test Means:Integraltestswitch
Indicators:AC-OnLEDindicator
Battery
Power Consumption*
RedACOnlyModels:
GreenACOnlyModels:
RedEmergencyModels:
GreenEmergencyModels:
120VAC
2.7watts
2.3watts
3.8watts
3.5watts
277VAC
2.7watts
2.3watts
3.8watts
3.5watts
*Wattage figures include LED lamps, transformer and electronics power
requirements. LED lamp assemblies (red or green) consume less than 1 watt.
Power factor, average:.8(lagging)
Warranty
Battery
Unit and
Electronics
Full
Pro-Rata
Standard Models
3years
2years 8years
Spectron Models5years3years 7years
Suggested Specifications
Exitsignconstructionwillbeflame-rated,UVstablethermoplasticintextured(white)(black)finish.Exitfacewillprovide6”high
letterswith3/4”strokeandsnap-in,chevrontypedirectional
arrows.Exitsigndesignwillallowuniversal120/277VAC,60
Hzoperation.NormalACilluminationwillbeprovidedbyredor
greenhigh-outputLEDsconsuminglessthanonewattat120
or277VAC.NormalLEDlamplifewillbeinexcessof20years.
ExitletterswillexceedthelumenoutputandilluminationuniformityrequiredbyULspecifications.Exitswillbeuniversalsingle/
doublefaceandprovidedwithallnecessarycomponentsforwall,
ceilingorendmountingapplications.Mountingcanopieswillbe
providedwithallmodelsandwillbeofidenticalconstructionand
colortomatchtheexitframe.Exitsshallbedesignedtomount
to4”squareor31/2”and4”octagonoutletboxesaswellas
standardplasterrings.Emergencyexitmodelswillbeachieved
througha(factory)(field)installedfullyautomaticemergency
operationmodule.Allemergencymodulecomponentswillmount
insidetheexithousingandwillincludeasolid-stateconstant
currenttypebatterycharger,amaintenance-freenickel-cadmium
battery,anAC-Onindicatorlightandatestswitch.Theunit
chargerwillbecapableofrechargingthebatterywithinacceptableULtimestandards.Theemergencyoperationmodulemust
becapableofprovidingaminimumof2hoursofemergency
operation.ExitsignsmustcomplywithallUL924,(ULDamp
Location)andNFPA101LifeSafetyCoderequirements.
Optionalequipmentwillinclude:__________________________
Dimensionstobe9”(228mm)highx13”(330mm)widex13/4”
(44mm)deep.
Type: Maintenance-freenickel-cadmium
A Hubbell Lighting, Inc. brand with representatives’ offices in principal cities throughout North America.
Copyright © Dual-Lite, All Rights Reserved • Specifications subject to change without notice. • Printed in U.S.A.
0603196 3/08