CONCEPT™ Accessories CONCEPT™ Accessories
™
Accessories
CONCEPT™ Accessories
CONCEPT
Accessories
Spec-00186
M63.422.2211
7
763.422.2600
CONCEPT™ Panel Conversion Kit
Panel Conversion Kit adapts enclosure for mounting standard
NEMA-style panels in CONCEPT™ enclosures. Bracket attaches to
rear collar stud. Kit includes four adapter plates and hardware for
mounting panel.
Bulletin: CWY
Catalog Number
CCPM4
Swing-Out Rack Frame
Material
Steel
Fits CONCEPT Enclosure
When A x B is equal to or less than 30.00 x 30.00 in. (762 x 762 mm)
Swing-Out Rack Frames provide 120-degree swing-out access for
19-in. rack equipment. Welded rack frame mounts to front flange.
Distance from frame to door surface is 1.32 in. (33 mm) for solid
doors and 1.07 in. (27 mm) for window doors. Frame is painted
white. Mounting hinge and latching hardware provided.
Order separately clip nut package catalog number XNM5 and
screws XSM5 (metric) or AN1032 and screws AS1032 (English).
Swing-Out Rack Frame cannot be mounted on adjustable mounting kit.
Bulletin: CWY
Catalog Number
CSF2424
CSF3024
CSF3624
CONCEPT™ Adjustable-Depth Mounting Kits
Material
Painted steel
Painted steel
Painted steel
Fits Enclosure A x B
24.00 x 24.00 in. (610 x 610 mm)
30.00 x 24.00 in. (762 x 610 mm)
36.00 x 24.00 in. (914 x 610 mm)
Adjustable-Depth Mounting Kits provide mounting means for
installing panels, swing-out panels, DIN rails, rack angles,
mounting channels or grid straps at any depth from front to rear of
enclosure. Kits include slide mechanisms and hardware. Use two
kits when enclosure has six collar studs for mounting panel. Kit
catalog numbers ending in 2 contain two slide mechanisms; catalog
numbers ending in 4 contain four slide mechanisms.
Dead Front Panel and Swing-Out Rack Frame cannot be mounted on
adjustable mounting kit.
Bulletin: CWY
Catalog Number
CAM64
CAM82
CAM84
CAM102
CAM104
CAM122
CAM124
CAM162
CAM164
CAM202
CAM204
Pole-Mount Kit
Fits CONCEPT
Enclosure (in.)
when C = 6.00
when C = 8.00
when C = 8.00
when C = 10.00
when C = 10.00
when C = 12.00
when C = 12.00
when C = 16.00
when C = 16.00
when C = 20.00
when C = 20.00
Fits CONCEPT
Enclosure (mm)
when C = 152
when C = 203
when C = 203
when C = 254
when C = 254
when C = 305
when C = 305
when C = 406
when C = 406
when C = 508
when C = 508
Use to mount CONCEPT™ , Networking and wall-mount enclosures
to poles of various sizes and shapes. Simply attach the plated steel
channel bar to the mounting holes at the back of the enclosure and
wrap the stainless steel strap around the pole and through the bar.
Kit includes two mounting channels, two straps suitable for 3-in.
(76-mm) to 12-in. (305-mm) diameter pole and mounting hardware.
Bulletin: CWY
Catalog Number
CPMK12
CPMK16
CPMK20
CPMK24
CPMK30
1
Accessories
SUBJECT TO CHANGE WITHOUT NOTICE
Fits Enclosure (in.)
when B = 12.00
when B = 16.00
when B = 20.00
when B = 24.00
when B = 30.00
Fits Enclosure (mm)
when B = 305
when B = 406
when B = 508
when B = 610
when B = 762
EQUIPMENT PROTECTION SOLUTIONS
Spec-00186 M
CONCEPT™ Accessories CONCEPT™ Accessories
Mounting Channels
Mounting Channels provide mounting framework for installing
DIN rails and grid straps at various positions within the enclosure.
Channels can be mounted vertically or horizontally to collar studs
or to the slide mechanisms of the adjustable-depth mounting kit. Kit
includes two channels.
Bulletin: CWY
Catalog Number
CMC12
CMC16
CMC20
CMC24
CMC60
Rack-Mount Angles
Fits CONCEPT Enclosure
when A or B = 12.00 in. (305 mm)
when A or B = 16.00 in. (406 mm)
when A or B = 20.00 in. (508 mm)
when A or B = 24.00 in. (610 mm)
when A or B = 60.00 in. (1524 mm)
Rack-Mount Angles are a mounting means for 19-in. rack
equipment in 24-in. wide enclosures. L-shaped through-hole angles
attach to enclosure flange or the adjustable-depth mounting kit.
Holes are .281 in. (7 mm) in diameter. Clear plated 14 gauge steel
construction. Mounting hardware included.
Order separately clip nut package catalog number XNM5 and screws
XSM5 (metric) or AN1032 and screws AS1032 (English).
Bulletin: CWY
Catalog Number
CRA12TH
CRA16TH
DIN3 Rail Kits
Fits CONCEPT Enclosure
when A = 24.00 in. (610 mm)
when A = 30.00 in. (762 mm)
Rack Units
12
16
DIN3 Rail Kits supply mounting surfaces for DIN mount snap-on
devices in either DIN 1, DIN 3 or CENELEC styles. Rails attach
vertically or horizontally to rear collar stud or to mounting
channels. Kit includes three rails and mounting hardware.
Bulletin: CWY
Catalog Number
CDR3P12
CDR3P16
CDR3P20
CDR3P24
EQUIPMENT PROTECTION SOLUTIONS
Spec-00186 M
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Fits CONCEPT Enclosure
when A or B = 12.00 in. (305 mm)
when A or B = 16.00 in. (406 mm)
when A or B = 20.00 in. (508 mm)
when A or B = 24.00 in. (610 mm)
Accessories
2
CONCEPT™ Accessories CONCEPT™ Accessories
CONCEPT™ Panels
These panels are taller and wider than corresponding NEMA-size
panels. Panels are 14 or 12 gauge steel and painted white or have a
conductive finish.
Panels have a formed flange along any side that is longer than 22.20 in.
(564 mm). CP2420 and CP2424 have a flange on all four sides.
Bulletin: CWP, CWY, DWDH2
Catalog Number
CP1212
CP1212G
CP1612
CP1612G
CP1616
CP1616G
CP2016
CP2016G
CP2014
CP2014G
CP2416
CP2416G
CP2020
CP2020G
CP2420
CP2420G
CP3020
CP3020G
CP3220
CP4420
CP5620
CP2424
CP2424G
CP3024
CP3024G
CP3624
CP3624G
CP4824
CP4824G
CP3030
CP3030G
CP3630
CP3630G
CP4230
CP4230G
CP3636
CP3636G
CP4236
CP4236G
CP4836
CP4836G
CP6036
CP6036G
CP2442
CP2442G
CP3048
CP3048G
CP3060
CP3060G
CP7236
Panel Type
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Painted steel
Painted steel
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Conductive
Painted steel
Panel Size D x E (in.)
10.20 x 10.20
10.20 x 10.20
14.20 x 10.20
14.20 x 10.20
14.20 x 14.20
14.20 x 14.20
18.20 x 14.20
18.20 x 14.20
18.20 x 12.20
18.20 x 14.20
22.20 x 14.20
22.20 x 14.20
18.20 x 18.20
18.20 x 18.20
22.20 x 18.20
22.20 x 18.20
28.20 x 18.20
28.20 x 18.20
30.20 x 18.20
42.20 x 18.20
53.20 x 18.20
22.20 x 22.20
22.20 x 22.20
28.20 x 22.20
28.20 x 22.20
34.20 x 22.20
34.20 x 22.20
46.20 x 22.20
46.20 x 22.20
28.20 x 28.20
28.20 x 28.20
34.20 x 28.20
34.20 x 28.20
40.20 x 28.20
40.20 x 28.20
34.20 x 34.20
34.20 x 34.20
40.20 x 34.20
40.20 x 34.20
46.20 x 34.20
46.20 x 34.20
58.20 x 34.20
58.20 x 34.20
22.20 x 40.20
22.20 x 40.20
28.20 x 46.20
28.20 x 46.20
28.20 x 58.20
28.20 x 58.20
70.20 x 34.20
Panel Size D x E (mm)
259 x 259
259 x 259
361 x 259
361 x 259
361 x 361
361 x 361
462 x 361
462 x 361
462 x 310
462 x 310
564 x 361
564 x 361
462 x 462
462 x 462
564 x 462
564 x 462
716 x 462
716 x 462
762 x 462
1072 x 462
1351 x 462
564 x 564
564 x 564
716 x 564
716 x 564
869 x 564
869 x 564
1173 x 564
1173 x 564
716 x 716
716 x 716
869 x 716
869 x 716
1021 x 716
1021 x 716
869 x 869
869 x 869
1021 x 869
1021 x 869
1173 x 869
1173 x 869
1478 x 869
1478 x 869
564 x 1021
564 x 1021
716 x 1173
716 x 1173
716 x 1478
716 x 1478
1783 x 869
Gauge
14
14
14
14
12
12
12
12
14
14
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Catalog number CP4230 is used on CONCEPT disconnect enclosures.
3
Accessories
SUBJECT TO CHANGE WITHOUT NOTICE
EQUIPMENT PROTECTION SOLUTIONS
Spec-00186 M
CONCEPT™ Accessories CONCEPT™ Accessories
CONCEPT™ Swing-Out Panels
CSPB Panels
Catalog Number
CSPB1212
CSPB1612
CSPB1616
CSPB1620
CSPB2016
CSPB2020
CSPB2024
CSPB2416
CSPB2420
CSPB2424
CSPB2430
CSPB3020
CSPB3024
CSPB3030
CSPB3624
CSPB3630
CSPB3636
CSPB4236
CSPB4824
CSPB4836
CSPB6036
Panels swing clear from the front of the enclosure to provide
access to mounted internal equipment. For CSPB panels, maximum
swing is 94 degrees. For CSP panels, maximum panel swing is 106
degrees. Distance from panel surface to door when in the latched
position is 1.71 in. (43 mm) for solid doors and 1.45 in. (37 mm) for
window doors. Kits include panel, brackets and hardware to mount
to the front flange. Panel is painted white.
Swing-out panels also can be mounted on front-to-back adjustable
rails. CSPB panels require adapter CSPBADB and front-to-back
adjustable rails for front-to-back adjustment.
Bulletin: CWY
Fits
Enclosure
Size (in.)
12.00 x 12.00
16.00 x 12.00
16.00 x 16.00
16.00 x 20.00
20.00 x 16.00
20.00 x 20.00
20.00 x 24.00
24.00 x 16.00
24.00 x 20.00
24.00 x 24.00
24.00 x 30.00
30.00 x 20.00
30.00 x 24.00
30.00 x 30.00
36.00 x 24.00
36.00 x 30.00
36.00 x 36.00
42.00 x 36.00
48.00 x 24.00
48.00 x 36.00
60.00 x 36.00
Fits
Enclosure
Size (mm)
305 x 305
406 x 305
406 x 406
406 x 508
508 x 406
508 x 508
508 x 610
610 x 406
610 x 508
610 x 610
610 x 762
762 x 508
762 x 610
762 x 762
914 x 610
914 x 762
914 x 914
1067 x 914
1219 x 610
1219 x 914
1542 x 914
Panel
Size (in.)
9.72 x 9.75
13.72 x 9.75
13.72 x 13.75
13.72 x 17.75
17.72 x 13.75
17.72 x 17.75
17.72 x 21.75
21.72 x 13.73
21.72 x 17.75
21.72 x 21.75
21.72 x 27.75
27.72 x 17.75
27.72 x 21.75
27.72 x 27.75
33.72 x 21.75
33.72 x 27.75
33.72 x 33.75
39.72 x 33.75
45.72 x 21.75
45.72 x 33.75
57.72 x 33.75
Panel
Size (mm)
247 x 248
349 x 248
349 x 349
349 x 451
450 x 349
450 x 451
450 x 553
552 x 349
552.452
552 x 553
552 x 705
704 x 451
704 x 553
704 x 705
857 x 553
857 x 705
857 x 857
1009 x 857
1161 x 553
1161 x 857
1466 x 857
CSP Panels
Catalog Number
CSP1212
CSP1612
CSP1616
CSP1620
CSP2016
CSP2020
CSP2024
CSP2416
CSP2420
CSP2424
CSP3020
CSP3024
CSP3030
CSP3624
CSP3630
CSP3636
Fits
Enclosure (in.)
12.00 x 12.00
16.00 x 12.00
16.00 x 16.00
16.00 x 20.00
20.00 x 16.00
20.00 x 20.00
20.00 x 24.00
24.00 x 16.00
24.00 x 20.00
24.00 x 24.00
30.00 x 20.00
30.00 x 24.00
30.00 x 30.00
36.00 x 24.00
36.00 x 30.00
36.00 x 36.00
Fits
Enclosure (mm)
305 x 305
406 x 305
406 x 406
406 x 508
508 x 406
508 x 508
508 x 610
610 x 406
610 x 508
610 x 610
762 x 508
762 x 610
762 x 762
914 x 610
914 x 762
914 x 914
Panel
Size (in.)
9.78 x 9.84
13.78 x 9.84
13.78 x 13.84
13.78 x 17.84
17.78 x 13.84
17.78 x 17.84
17.78 x 21.84
21.78 x 13.84
21.78 x 17.84
21.78 x 21.84
27.78 x 17.84
27.78 x 21.84
27.78 x 27.84
33.78 x 21.84
33.78 x 27.84
33.78 x 33.84
Panel
Size (mm)
248 x 250
350 x 250
350 x 352
350 x 453
452 x 352
452 x 453
452 x 555
553 x 352
553 x 453
553 x 555
706 x 453
706 x 555
706 x 707
858 x 555
858 x 707
858 x 860
CONCEPT™ Adapter Bracket
Bulletin: CWY
Adapter bracket for use with CONCEPT™ B-style Swing-Out Panels
and Adjustable-Depth Mounting Kits. Bracket enables the B-style
swing-out panels to be mounted in infinite front-to-back positions
within a CONCEPT enclosure.
Catalog Number
CSPBADB
Handles
Handles can replace the standard slotted insert on all CONCEPT™ wall-mount enclosures. The CONCEPT non-locking handle provides
quick and easy access to the enclosure contents. Handle is black
plastic. A zinc die-cast keylock handle is available for applications
requiring quick access and security. A padlocking handle, also zinc
die-cast, accommodates a padlock with up to a 5/16-in. locking bar.
Each latch system can be converted from clockwise to counterclockwise opening. Kit includes all hardware.
Material
Steel
Bulletin: CWY
Catalog Number
CWHK
CWHNL
CWHPTO
UL Rating
Maintains UL/CSA Type 12 when properly installed
Maintains UL Type 3, 4, 4X, 12 when properly installed
Maintains UL/CSA Type 3, 4, 12 when properly installed
Description
Keylock handle
Non-locking handle
Padlock handle
CWHNL is not suitable for 3-point latch operation.
EQUIPMENT PROTECTION SOLUTIONS
Spec-00186 M
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Accessories
4
CONCEPT™ Accessories CONCEPT™ Accessories
Door Stop Kit
Door Stop Kit secures the door in the open position. Kit can be
installed at the top or bottom of a door which opens horizontally.
Door opening angle can be easily adjusted by means of a wing nut.
Stop arm slides neatly out of the way when the door is closed. All
parts are plated. Mounting hardware included.
• Door stop kits should not be installed on enclosures configured with a
swing-out panel or swing-out rack frame
• Door stop kits cannot be used with CONCEPT window doors
Bulletin: A80
Catalog Number
ADSTOPK
Data Pockets
Finish
Plated Steel
Data Pockets provide convenient storage for wiring diagrams,
operation manuals and other documentation inside an enclosure.
Pocket mounts on studs located on the inside of a solid-door
enclosure. Constructed of high-impact thermoplastic, pockets are
dark gray and have cutout areas for easy access and visibility to
contents. Mounting hardware included.
Bulletin: UX1Y
Catalog Number
ADP1
ADP2
Length x Width
in./mm
6.00 x 6.00
152 x 152
12.00 x 12.00
305 x 305
Fits CONCEPT Enclosure
when A is less than or equal to 24
and B is less than or equal to 24
when A is greater than or equal to 30
and B is greater than or equal to 20
Use ADP2 when A = 24 and B = 30
Lock Inserts
Lock inserts can be substituted for the standard 3-mm double-bit
latch insert. Inserts have a chrome finish. Matching key is zinc diecast.
Bulletin: A4GY, CWY
Catalog Number
CLKTM7
CLKSM7
CLKDBM3
CLKSLOT
Mounting-Bracket Kits
Description
Triangular 7-mm insert with key
Square 7-mm insert with key
Double bit with key
Slotted Insert no key
Mounting-Bracket Kits are field installable. Composite and
stainless steel brackets are rated to Type 4X. Set of four (4) brackets
can support 500 lb. maximum load. All hardware is included. Four
brackets per kit.
Mounting brackets are required to maintain UL/CSA external mounting
requirement.
Bulletin: A80
Catalog Number
CMFK
CMFKSS
CMTGFT
5
Accessories
SUBJECT TO CHANGE WITHOUT NOTICE
Description
Steel
Stainless Steel
Composite
EQUIPMENT PROTECTION SOLUTIONS
Spec-00186 M
CONCEPT™ Accessories CONCEPT™ Accessories
Hinge Pins
Contact Customer Service to order new mild steel hinge pins for an
existing product.
Bulletin: VM3
Description
Hinge Pin
Catalog Number
GHPINMS
Door Bars
Non-metallic door bar includes pressure-sensitive tape adhesive.
Bulletin: CWY
Catalog Number
ADB305MM
EQUIPMENT PROTECTION SOLUTIONS
Spec-00186 M
Qty.
2
Description
Door Bar
PH 763.422.2211 • FAX 763.422.2600 • HOFFMANONLINE.COM
Length
8 in. (203 mm)
Qty.
4
Accessories
6