Luminaire Type:
Catalog Number
(autopopulated):
Gotham Architectural Downlighting
HID Accent
6” SQDTH
Adjustable Lamp
T4/T6
FEATURES
OPTICAL SYSTEM
•
Self-flanged, anodized semi-specular or matte-diffuse metal finishing trim.
•
Patented optical design provides lamp before lamp image and smooth transition
from top of the reflector to bottom. Patented Bounding Ray™ Optical Principle
design (U.S. Patent No. 5,800,050).
•
1/8” thick softening lens eliminates beam striations and ensures maximum
efficiency. Provides required protective shielding.
•
1/8” thick softening lens eliminates beam striations and ensures maximum
efficiency. Provides required protective shielding.
•
Tool-less 0° - 35° vertical and 360° horizontal lamp adjustments made with the
trim assembly removed for simple focusing.
MECHANICAL SYSTEM
•
Rolled steel housing with matte black finish and 16-gauge painted steel mounting/plaster frame accommodates up to 1-1/2” thick ceiling materials.
•
Patent-pending adjustable aperture allows 1/4” adjustments in all directions
and up to 5° of rotation allowing post-installation adjustments to ensure trim to
trim alignment.
•
16-gauge galvanized steel mounting bars with continuous 4” vertical adjustments are shipped pre-installed.
•
Post-installation adjustment possible without the use of tools from above or
below ceiling.
•
Secondary housing adjustment system for precise, final ceiling to flange alignment.
ELECTRICAL SYSTEM
•
Tool-less access door provides access to junction box and ballast through
the aperture.
•
G12 (T6), G8.5 (T4) or PGJ5 (T4T) base ceramic socket.
•
Pre-wired, electronic, 120 or 277V ballast module is standard.
•
3000 K lamp ships standard.
•
Thermally activated insulation detector.
LISTING
•
Fixtures are UL listed for thru-branch wiring, Non-IC recessed mounting and
damp locations. Listed and labeled to comply with Canadian Standards.
WARRANTY
•
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
ORDERING INFORMATION
EXAMPLE: SQDTH T6 70MHC 6AR N LD 120
Series
Lamp type
Wattage
Aperture/Trim
Distribution
Finish
SQDTH1
T4T2
T43
T64
20MHC
39MHC
70MHC
150MHC5
6AR
6PR
6WTR
6WR6
6BR6
N
M
W
Narrow
Medium
Wide
(blank)
LD
Clear
Pewter
Wheat
White
Black
Semi-specular
Matte-diffuse
Voltage
Options
120
277
347
QRS
QRSTD
EC
SF
LRC7
TRW
MFLG8
CP
L/LP
Quartz restrike system
QRS with time delay
Emergency circuit
Single fuse
Provides compatibility with Lithonia Reloc®
System. Access above ceiling required.
White flange
Microflange trim
Chicago plenum approved
Less lamp
ACCESSORIES order as separate catalog numbers (shipped separately)
LTWFH700 DBL
F700
Filter holder
Lens for use with 700 series filter holder.
NOTES
ORDERING NOTES
1.
2.
3.
4.
Standard metal trim (SQMT).
Philips Mini MasterColor available in 20W, 39W & 120V only.
Available in 20W, 39W and 70W only.
Available in 39W, 70W and 150W only.
5.
6.
7.
8.
California Title 20 compliant.
Not available with matte-diffuse finish.
For compatible Reloc systems, refer to TECH-110.
Order ships as 3 components: housing, trim and microflange gypsum board.
SQDTH-6-ADJ
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
PAGE 1 OF 3
© 2009-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 01/24/13. Specifications subject to change without notice.
6” SQDTH
Adjustable Lamp
T4/T6
DIMENSIONAL DATA
All dimensions are inches (centimeters) unless otherwise noted.
13-7/8
(35.2)
19-13/16
(50.4)
21-3/4
(55.2)
Ceiling opening:
Overlap trim:
Aperture opening:
6-5/8 (16.8)
7-3/16 (18.3)
5-15/16 (15.1)
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
SQDTH-6-ADJ
© 2009-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 01/24/13. Specifications subject to change without notice.
PAGE 2 OF 3
6” SQDTH
Adjustable Lamp
T4/T6
PHOTOMETRY
CONSULT FACTORY FOR PHOTOMETRY
PHOTOMETRY NOTES
•
•
•
Tested to current IES and NEMA standards under stabilized laboratory conditions.
Actual performance may differ as a result of end-user environment and application.
Consult factory or IES file for microgroove baffle, black cone or other photometric reports.
SQDTH-6-ADJ
GOTHAM ARCHITECTURAL DOWNLIGHTING | 1400 Lester Road Conyers GA 30012 | P 800.315.4982 | gothamlighting.com
PAGE 3 OF 3
© 2009-2013 Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 01/24/13. Specifications subject to change without notice.