V is h ay I nt e rt e c h no l o g y, I nc .
I
INNOVAT
AND TEC
O L OGY
ORN
N
HN
thin film resistor
O
19
62-2012
Resistors - Dual-In-Line Thin Film Network
Molded, 50 Mil Pitch, Dual-in-Line Resistor,
Surface-Mount Thin Film Network
Key Benefits
•
•
•
•
•
Wide resistance range available: 33 Ω to 500 kΩ
Close ratio tolerance: 0.05 %
Tight TCR tracking: ± 5 ppm/ºC
Ratio stability characteristics: ∆R ± 0.015 % at 2000 h and + 70 ºC
Standard narrow-body SOIC gullwing surface-mount molded package
APPLICATIONS
• Industrial applications
• Medical instrumentation and imaging
• Process controls
Resources
• Datasheet: ORN - http://www.vishay.com/doc?60005
• For technical questions contact thinfilm@vishay.com
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0265-1201
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V is h ay I nt e rt e c h no l o g y, I nc .
I
INNOVAT
ORN
www.vishay.com
AND TEC
ORN
19
O L OGY
thin film resistor
N
HN
O
62-2012
Vishay Dale Thin Film
FEATURES
• 0.068" (1.73 mm) maximum seated height
• Rugged molded case construction with no
internal solder
• Low temperature coefficient (± 25 ppm/°C)
• JEDEC MS-012 STD variation AA package
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21 definition
Actual Size
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
ORN series resistor networks feature four isolated resistors
with standard 50 mil pitch lead spacing. The networks
feature close TCR tracking and tight ratio tolerance and are
ideally suited for unity gain operational amplifier circuitry.
The standard resistance offering listed are available for
immediate delivery.
TYPICAL PERFORMANCE
TCR
SCHEMATIC
TOL.
8
7
6
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.05
5
STANDARD RESISTANCE OFFERING (R1 =)
R1
R1
1
R1
2
R1
3
49.9 
10 k
100 
20 k
500 
50 k
1 k
100 k
2 k
200 k
4.99 k
500 k
4
5 k
Note
• Consult factory for additional values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
Revision 02-Sep-11
Resistors - Dual-In-Line Thin Film Network
Molded,
Pitch,
Dual-in-Line
Resistor,
Molded,
5050
milMil
Pitch,
Dual-In-Line
Thin Film
Resistor,
Surface-Mount
Thin Film
Network
Surface Mount
Network
TEST
Material
Pin/Lead Number
Resistance Range
TCR: Absolute
TCR: Tracking
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
Revision: 02-Sep-11
SPECIFICATIONS
Passivated nichrome
8
33  to 500 k per resistor
± 25 ppm/°C
± 5 ppm/°C
± 0.05 % to ± 1.0 %
± 0.01 % to ± 0.5 %
100 mW
400 mW
R ± 0.05 %
R ± 0.015 %
0.1 ppm/V (typical)
100 V max. not to exceed P x R
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 30 dB
0.08 μV/°C
R ± 0.01 %
R ± 0.002 %
1
CONDITIONS
- 55 °C to + 125 °C
- 55 °C to + 125 °C
+ 25 °C
+ 25 °C
Maximum at + 70 °C
Maximum at + 70 °C
2000 h at + 70 °C
2000 h at + 70 °C
1 year at + 25 °C
1 year at + 25 °C
Document Number: 60005
For technical questions, contact: thinfilm@vishay.com
PRODUCT SHEET
2/2 THE PRODUCTS DESCRIBED HEREIN AND THIS
VMN-PT0265-1201
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000