High Efficiency Lens - Pinnacle Architectural Lighting

advertisement
EDGE EV1HE
E V O L U T I O N
LED Recessed Linear with
High Efficiency Lens
Project Name
Date
Catalog Number
Type
CONSTRUCTION Extruded aluminum trim with formed cold rolled 20 gauge steel back box housing. Highly reflective
die-formed white painted steel reflector, .09” snap-in acrylic lens, removable for maintenance.
ELECTRICAL Electronic, 120 to 277 volt input and 36V output. 0-10 volt dimming standard. Must specify 1D in circuiting
for dimming.
LED All luminaire configurations tested in accordance with IES LM-79. Diodes tested in accordance with IES LM-80.
R9≥20, 27K is CRI≥90, 30K, 35K, and 40K is CRI≥82. Minimum lifetime greater than 60,000.
MOUNTING Edge Evolution is designed to install into acoustical grid and inaccessible ceilings. Specify GXG, FLF, SFS,
NFN for individual, unjoinable units (individual units will fall on-grid). Specify GX, FL, SF, NF for continuous runs (runs
designed to fall on-grid). Consult factory for detailed installation instructions.
FINISH Standard powder-coat textured white, metallic silver, textured black, graphite or bronze painted finish. Consult
factory for chip of standard paint finishes. Contact factory for additional custom color and finish options.
WARRANTY Edge Evolution LED offered with a 5-year limited warranty. Covers LED, driver and fixture.
LABELS IC Rated, UL and cUL Listed, approved for dry/damp location unless otherwise noted.
YEAR LED
WARRANTY
Recessed
Daylight
Sensor
MR16
Corners
LFL
Convertible
LED
YEAR LED
WARRANTY
LED
LFL
3-1/2”
(88.9mm)
LED
Convertible
Convertible
LFL
3-1/2”
(88.9mm)
Convertible
LED
LFL
1-1/2” (38.1mm)
G1/G9: 2-5/16” (58.7mm)
FL: 2-9/16” (65.8mm)
L U M I N A I R E S P E C I F I C AT I O N
EV1_HE
EV1__-
____-
___’-
___-
HOUSING
COLOR/LUMENS
LENGTH
MOUNTING1
Sample Catalog #: EV1HE-30-24’-FL-120-1C-W
___-
Individual Units3
2- 23” (584.2mm)3
3- 35”’ (889mm)3
4- 47” (1193.8mm)3
5- 59” (1498.6mm)3
6- 71” (1803.4mm)3
Staggered
7- 83” (2108.2mm)3
Lamps
8- 95” (2413mm)3
Continuous Runs4
xx’- Specify row length to 1’ increments
Suspended
(bidirectional housing)
Installation
Instructions
Temperature
Staggered
Lamps
27K Color
Lumen Options
27See page 2 for lumen packages
27HO- See page 2 for lumen packages
30K Color Temperature Lumen Options
30See page
for lumen packages
Year2LED
Warranty
30HO- See page
2 for lumen packages
35K Color Temperature Lumen Options
35See page 2 for lumen package
LFL page 2 for lumen LED
35HO- See
packages
Convertible
Convertible
40K Color
Temperature
Lumen
Options
LED
LFL
40See page 2 for lumen package
40HO- See page 2 for lumen packages
__-
YEAR LED
WARRANTY
VOLTAGE
LFL
EV1HE- Edge
Evolution 1, High
Efficiency Lens
EV1BW- Edge
Evolution 1, High
Efficiency Lens
with Batwing Insert
EV1WHE- Edge
Evolution 1, High
Efficiency Lens
with Asymmetric Insert
Convertible
LED
120- 120 V
V
277- 277
3-9/16”
347 V
347- (90.5mm)
UNV- UNV
(120-277)
CIRCUITING
(short housing)
Custom Output2
CL_____- Specify color temp. and lumens/ft. (i.e. CL35600)
CW____- Specify color temp. and wattage/ft. (i.e. CW407.5)
__-
____
FINISH
OPTIONS
LED
Convertible
1C1D1B1E-
LFL
Single Circuit
Single Circuit Dimming6
Single Circuit with Battery6
Single Circuit with
Emergency Circuit6
3
Individual Units
1-1/2”(CANNOT
(38.1mm)BE JOINED)
Acoustical Grid Ceiling
1-3/4” (44.5mm)
G1G- 1” (25.4mm) Ceiling Grid
(Utilize Illuminated [EI] or Non-Illuminated
G9G- 9/16” (14.3mm) Ceiling Grid
[EN] Extension in the Options sectionEX1B_HE/HE
to
GSG- Screw Slot Ceiling Grid
specify rows to 1/8” increments)
GBG- 9/16” (14.3mm) Grid with Bevel Trim
Inaccessible Ceiling
FLF- Standard 1/2” (12.7mm) Flange
SFS- Spackle Flange
5
(44.5mm)
NFN- Flangeless1-3/4”
Suspended
1-1/2” (38.1mm)
NF: 1-15/16” (48.5mm)
Continuous Runs (JOINABLE)4
Acoustical Grid Ceiling
G1- 1” (25.4mm)
Ceiling Grid
2-5/16”
G9- 9/16” (14.3mm)
Ceiling Grid
(58.7mm)
GS- Screw Slot Ceiling Grid
GB- 9/16” (14.3mm) Grid with Bevel Trim
Inaccessible Ceiling
1-1/2” (38.1mm)
FL- Standard 1/2” (12.7mm) Flange
SF- Spackle Flange
EX12_HE
NF- Flangeless5
remote
Specify lumens/watts between standard offering listed above. Lumens are specified per color temp.
W- Matte White
S- Metallic
Silver
3-9/16”
BL- Textured
Black
(90.5mm)
BR- Bronze
GR- Graphite
CC- Custom Color
1-1/2” (38.1mm)
1-3/4”
(44.5mm)
CPChicago
Plenum
CL90° Horizontal Corner
CI90° Inside Corner
EX1B_HE/HEL
CO90° Outside Corner
CTT Intersection
CXX Intersection
RCRotating Crossbar8
1-1/2” (38.1mm)
PMPerimeter
Mount7
FW66’, 18 gauge, Flex Whip
FW12- 12’, 18 gauge, Flex Whip
EI__- Factory Installed
2-5/16”
Illuminated Extension9
(58.7mm)
1-3/4” (44.5mm)
EX12_N/HE
3
See page 3 for mounting detail. 2
Individual units cannot be joined. All end trims are factory installed
and cannot be removed in the field. 4Continuous Rows made up of both even and odd length fixtures. Designed to fall on-grid. 5NF and NFN to be utilized for metal pan / millwork ceiling. 6Some Edge Evolution configurations will not accommodate all electrical options. Consult factory. 7Available for acoustical grid ceilings. Wall rail painted white unless otherwise specified. 81/2” to 5/8” drywall thickness.
Available for standard 1/2” flange (FL). 9Use “__” to specify desired length. Minimum length is 1”. Sample part number EV1HE-27-24-G1-120-1C-W-EI4 for order a 24’-4” run.
1
®
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
August 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
PHOTOMETRY
EDGE EVOLUTION EV1
828
497
882
995
1840
621
372
662
747
1380
414
248
441
498
920
207
124
221
249
460
Test#: ITL86985
Part #: EV1HE-40-4
Lumens per watt: 87
Total Delivered Lumens: 1726
Test#: ITL86987
Part #: EV1BW-40-4
Lumens per watt: 69
Total Delivered Lumens: 1371
828
497
DELIVERED LUMENS
(Numbers are shown as per foot)372
621
882
995
1840
662
747
1380
248
441
498
920
207
124
221
249
460
High Efficiency
Bat Wing
Lumens Watts Lumens Watts
27
325 lm 4.9W
258 lm 4.9W
27HO
601 lm 9.3W
478 lm 9.3W
30
412 lm 4.9W
327 lm 4.9W
30HO
760 lm 9.3W
604 lm 9.3W
Test#:
ITL86985
35
424 lm 4.9W
336 lm 4.9W
Part
35HO#: EX1HE-N-40-4
782 lm 9.3W
621 lm 9.3W
Lumens
per
87
40
432watt:
lm 4.9W
343 lm 4.9W
40HODelivered
797 lm Lumens:
9.3W 1726
633 lm 9.3W
Total
Asymmetric
Lumens Watts
289 lm 4.9W
534 lm 9.3W
366 lm 4.9W
676 lm 9.3W
Test#:
ITL86987
376 lm
4.9W
Part695#:lm
EX1BW-N-40-4
9.3W
Lumens
watt: 69
383 lmper4.9W
708Delivered
lm 9.3WLumens: 1371
Total
828
497
882
995
1840
662
747
1380
414
248
441
498
920
23" (584.2mm)
207
124
221
249
460
(1) lens per 2' unit
35" (889mm)
71” (1803.4mm) or 72” (1828.8mm)
6'
(1) lens per 3' unit
(1) lens per 6' unit
Test#: ITL86985
47” (1193.8mm) or 48” (1219.2mm) Test#: ITL86987
Part #: EX12HE-N-40-4
Part #: EX12BW-N-40-4
4'
Lumens per watt: 87
Lumens per watt: 69
(1) lens per 4' unit
Total Delivered Lumens: 1726
Total Delivered Lumens: 1371
59” (1498.6mm) or 60” (1524mm)
Test#: ITL87006
Test#: ITL86988
83” (2108.2mm) or 84” (2133.6mm)
Part #: EX12P-N-40-4
Part #: EX12WHE-N-40-4
7'
Lumens per watt: 57
Lumens
per watt: 77
(1) lens per 7' unit
Total Delivered Lumens: 1144
Total Delivered Lumens: 1532
95” (2413mm) or 96” (2438.4mm)
5'
8'
(1) lens per 5' unit
742
1372
(1) lens per 8' unit
1Acoustical Grid Ceiling and Inaccessible Ceilings available as individual units or continuous rows. Individual units and rows are available for on-grid installation with acoustical ceilings.
557
1029
Specified Individual units are shipped as odd fixtures. Continuos rows consist of both odd and even fixtures.
793
1443
595
1082
686
396
721
186
343
198
361
23" (584.2mm)
SJT
2'
attached (1) louver per 2' unit
Test#: ITL87004
at factory
35" (889mm)
Part #: EV1HED-N-40-4
Lumens per watt: 80
3'
louver perLumens:
3' unit 1582
Total(1)Delivered
Ends
47” (1193.8mm)
or 48” (1219.2mm)
attached
5'
Test#: ITL87006
Part #: EX12P-N-40HO-4
Lumens per watt: 57
Total Delivered Lumens: 2115
371
JOINING DETAILS
4'
Test#: ITL87006
Part #: EX1P-N-40HO-4
Lumens per watt: 57
Total Delivered Lumens: 2115
Test#: ITL87006
Part #: EX1P-N-40-4
Lumens per watt: 57
Total Delivered Lumens: 1144
Test#: ITL86988
Part #: EX1WHE-N-40-4
Lumens per watt: 77
Total Delivered Lumens: 1532
621 AND CONTINUOUS RUN
372 MODULES 1
INDIVIDUAL
3'
Test#: ITL87006
Part #: EV1P-40HO-4
Lumens per watt: 57
Total Delivered Lumens: 2115
414
DIRECT
Color Temperature / Lumens
2'
Test#: ITL87006
Part #: EV1P-40-4
Lumens per watt: 57
Total Delivered Lumens: 1144
Test#: ITL86988
Part #: EV1WHE-40-4
Lumens per watt: 77
Total Delivered Lumens: 1532
ILLUMINATED EXTENSIONS
The new joining feature on the
EV1 incorporates the joining
biscuits used in all the Edge
Evolution family and also a new
Test#: ITL87004
Bracket that goes onto the
Part #: Joint
EV1HED-N-40HO-4
the fixtures
and locks the
Lumenstop
perofwatt:
80
joined fixtures
together.
Total Delivered
Lumens:
2924
at factory
(1) louver per 4'742
unit
59”557
(1498.6mm) or 60” (1524mm)
1372
6'
7'
1029
371
686
(2) louvers per186
5' unit, made up of a 2’ and 3’
343
1Add 1/4” (6.4mm) for each end plate or 1/2” (12.7mm) to the overall length of the row.
®
8'
APPLICATION: Illuminated extensions allow
architects to go beyond the 1 ft standard row
configurations. Don’t modify your design to
accommodate
Evolution
Test#:
ITL86999 the lighting, form Edge
Test#:
ITL87000
71” (1803.4mm) or 72” (1828.8mm)Part1 #:
fixtures
to fit your design. Illuminated
EX12-N-HE-40-4
Part #:extenEX12-N-HE-40HO-4
sions per
allow
rows
1/8” increLumens
watt:
101to be specified inLumens
per watt: 102
(2) 3’ louvers per 6' unit
ments
with the
minimum
at 1”. Lumens: 3498
Total
Delivered
Lumens:
1911length starting
Total Delivered
83” (2108.2mm) or 84” (2133.6mm)
ORDERING INFORMATION: Specify illumination
connections in the options section
7424’
1372 of the part
(2) louvers per 7' unit made up of a 3’ and
number. For example, ordering a 24’-3” row
1029
95” (2413mm)557
or 96” (2438.4mm)
would be entered as EV1HE-35-24’-G1-120-1C371
686
W-EI3”
(2) 4’ louvers per 8' unit
186
343
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
© 2016 Pinnacle Architectural Lighting®
August 2016
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Test#: ITL87004
Test#: ITL87004
Test#: ITL87004
Test#: ITL87004
EDGE EVOLUTION EV1
MOUNTING DETAILS
1” Grid Mounting Options
9/16” Grid Mounting Options
Screw Slot
Mounting
1” Grid, Standard Tile: 1” Grid, Tegular Tile: 9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
Use G1 or G1G in part # Use G1 or G1G in part # Use G9 or G9G in part # Use G9 or G9G in part # Use GB or GBG in part # Use GS or GSG in part # Use GS or GSG in part #
INACCESSIBLE CEILING MOUNTING
Flange Detail
Non-Flange
SPECIALTY MOUNTS
Spackle Flange
Exposed Flange Detail:
Metal Pan or Millwork:
Drywall, Flangeless Look:
Specify FL or FLF in part # Specify NF or NFN in part # Specify SF or SFS in part #
CORNER
CONNECTOR
1” GridAND
Mounting
Options DETAILS
Perimeter Mount
Rotating Crossbar
Bracket and Wall Rail:
Specify PM in part #
Unavailable Structure Support:
Specify RC in part #
9/16” Grid Mounting Options
12”
(305mm)
12”
(305mm)
6”
(152mm)
Screw Slot
Mounting
6”
(152mm)
12”
12”
11-1/8”
(305mm)
(305mm)
(283mm)
1” Grid, Tegular Tile:
9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
Use G1 or G1G in part # Use G1 or G1G in part # Use G9 or G9G in part # Use G9 or G9G in part # Use GB or GBG in part # Use GS or GSG in part # Use GS or GSG in part #
12”
1”(305mm)
Grid, Standard Tile:
11-1/8”
(282mm)
Flange Detail
Non-Flange
6”
(152mm)
Spackle Flange
12”
11-1/8”
(282mm)
Perimeter Mount
Rotating Crossbar
(305mm)
APPLICATION: Utilize horizontal corners, inside
corners, outside corners, “X”s and “T”s to create
unique patterns and configurations in your space.
INSTALLATION: Corners easily join to linear
fixtures using standard Pinnacle Lighting joiner kits.
Exposed Flange Detail:
Metal Pan or Millwork:
Drywall, Flangeless Look:
Specify FL or FLF in part # Specify NF or NFN in part # Specify SF or SFS in part #
1” Grid Mounting Options
ORDERING INFORMATION: Specify corner in the
options section of the part number. Sample Catalog #:
EV1-HE-30-24-G1-120-1C-W-CX.
Bracket and Wall Rail:
Specify PM in part #
Unavailable Structure Support:
Specify RC in part #
9/16” Grid Mounting Options
Screw Slot
Mounting
1” Grid, Standard Tile: 1” Grid, Tegular Tile: 9/16” Grid, Standard Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile: 9/16” Grid, Tegular Tile:
Screw Slot Grid:
Use G1 or G1G in part # Use G1 or G1G in part # Use G9 or G9G in part # Use G9 or G9G in part # Use GB or GBG in part # Use GS or GSG in part # Use GS or GSG in part #
Pinnacle Architectural Lighting 12655 East 42nd Avenue, Suite 50 Denver, CO 80239
Phone 303.322.5570
Fax 303.322.5568 www.pinnacle-ltg.com
®
Flange Detail
Non-Flange
Spackle Flange
© 2016 Pinnacle Architectural Lighting®
Perimeter Mount
August 2016
Rotating Crossbar
Specifications and dimensions subject to change without notice. Specification sheets that appear on pinnacle-ltg.com are the most recent version and supersede all other previously printed or electronic versions.
Download