CALL 800-942-2324
FAX 800-577-8832
ORDERS@LOADRITE.COM
WELCOME TO LOAD RITE'S NEWEST
PARTS CATALOG
FAMILIAR LAYOUT
This parts catalog is designed to dissect a boat trailer from the ground up. Beginning with
tires and fenders then progressing through axles, hubs and brakes, on to frame components,
lighting, and support systems. Following the trailer system breakdown are sections featuring
utility trailer, snowmobile trailer, and miscellaneous accessories. The final section lists the
various hardware components that form the "glue" of a quality Load Rite trailer, followed by
appendices with information on trailer maintenance.
NEW PARTS AND FEATURES
On the opposite page is a Quick Reference Trailer Chart. It is designed both to help quickly
locate the area of the catalog containing the parts you need, and as a descriptive aid when
ordering parts.
The appendices are a compendium of useful information assembled to form a reference
manual of trailer specification and maintenance.
Load Rite is proud to publish this comprehensive offering.
THE FUTURE
This edition of our parts catalog is designed to become a trusted resource for your trailer
parts needs. Every effort has been made in designing a useful tool for Load Rite dealers and
to help you regard Load Rite as the first source for all of your trailer parts needs.
Load Rite anticipates your comments and welcomes requests, corrections, and critiques of
this document. Load Rite has made every effort to offer complete and accurate information in
a concise and useful format. We realize that any publication leaves room for improvement. It
is the intention of Load Rite that each subsequent Parts Catalog be better, more accurate,
and more comprehensive than the version it replaces.
Corrections and suggestions are accepted at customerservice@loadrite.com. Interim updates
will be available at our website, www.loadrite.com.
CALL 800-942-2324
FAX 800-577-8832
Load Rite Trailers, Inc.
265 Lincoln Highway
Fairless Hills, PA 19030
215-949-0500
www.loadrite.com
Products manufactured by Load Rite carry a two-year warranty against defects in material and
workmanship. This warranty is limited to defective parts replacement only. Labor charges,
incidental, and consequential damages resulting from the warranted defect are excluded. Items of
outside manufacture purchased through Load Rite Trailers, Inc. will be replaced by Load Rite within
30 days of purchase if found defective in manufacture or workmanship. Thereafter, items of outside
manufacture will be subject to the terms and conditions of the original manufacturer, and are
otherwise not warranted for any purpose by Load Rite Trailers, Inc. Load Rite Trailers, Inc. is not
responsible for consequential damage or injury incurred as a result of accident, improper installation,
overloading, or alteration of any product in any manner by anyone.
This catalog is and will remain the property of Load Rite Trailers, Inc. No part of this catalog may be
reproduced, stored in a retrieval system or transmitted by any form or by any means, electronic,
photocopying, recording or otherwise, or exploited either in whole or in part, without prior and express
written consent of Load Rite Trailers, Inc.
Copyright © 2008 by Load Rite Trailers, Inc.
Load Rite Trailers, Inc. is not responsible for printing errors and omissions.
2
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
10
11
12
Winchstand Components
Hull Support System Components
Rollers, bunks, pivot bar assemblies, and support peripherals
Snowmobile
Options and accessories for all needs
Hardware Components
Torsion axles, spring axles, spindles, bearings, and springs
Appendix
Recommended maintenance procedures, charts, and reference materials
Wheel &
Fender
Axles &
Parts
Brakes
Hubs &
Spindles
Replacement parts and options for snowmobile trailers
Optional Accessory Components
Frames
Hull
Support
Weldments, assemblies, winches, cables, and bowstops
Lights
Lights, harnesses, brackets, and accessories
Winch
Lighting Components
6-
Tongues, couplers and accessories, brackets, and crossbars
Snow
23-
45-
Frame Components
Options
9
Actuators, drum and disc components, brake lines, and complete kits
Hardware
8
Braking Components
Appendix
7
Hubs, drums, bearings, seals, caps, and spindles
7-
6
Hub and Spindle Components
8-
5
Torsion axles, spring axles, spindles, bearings, and springs
9-
4
Axle Assemblies and Components
10 -
3
Tires on wheels, spare tire carriers, fenders and brackets
11 -
2
Wheel Assemblies and Fender Components
12 -
1
1-
contents
section
3
CALL 800-942-2324
FAX 800-577-8832
Steel Wheel and Tire Assemblies
Diameter
6.5"
1-
Wheel &
Fender
A
B
Part #
Tire Size
Wheel Size
Lug
1432.03
16.5 x 6.5
8 x 5.38
5 - 4.5
Galv
B
8"
1087.02G
4.80 x 8
8 x 3.75
5 - 4.5
Galv
B
8"
1431.03
5.70 x 8
8 x 3.75
5 - 4.5
Galv
B
8"
6100.81
18.5 x 8
8 x 7.00
5 - 4.5
Galv
C
B
10"
6100.71
6100.75
6100.77
20.5 x 10
20.5 x 10
20.5 x 10
10 x 6.00
10 x 6.00
10 x 6.00
5 - 4.5
5 - 4.5
5 - 4.5
Galv
Galv
Galv
C
D
E
C
12"
1087.09G
1435.15
4.80 x 12
4.80 x 12
12 x 4.00
12 x 4.00
5 - 4.5
5 - 4.5
Galv
Galv
B
C
D
12"
1436.07
5.30 x 12
13"
6100.01
1450.10
1450.10R
1450.11
ST175 / 80D13
ST175 / 80D13
ST175 / 80D13
ST175/80D13
13 x 4.50
13 x 4.50
13 x 4.50
13 x 4.50
5 - 4.5
5 - 4.5
5 - 4.5
5 - 4.5
Galv
Galv
Galv
Galv
B
C
C
D
14"
6100.35
6100.66
6100.66R
6100.64
6100.64R
ST205 / 75D14
ST205 / 75D14
ST205 / 75D14
ST215 / 75D14
ST215 / 75D14
14 x 6.00
14 x 6.00
14 x 6.00
14 x 6.00
14 x 6.00
5 - 4.5
5 - 4.5
5 - 4.5
5 - 4.5
5 - 4.5
Galv
Galv
Galv
Galv
Galv
B
C
C
C
C
15"
6100.85
6100.85R
6100.83
6100.83R
ST225 / 75D15
ST225 / 75D15
ST225 / 75D15
ST225 / 75D15
15 x 6.00
15 x 6.00
15 x 6.00
15 x 6.00
6 - 5.5
6 - 5.5
6 - 5.5
6 - 5.5
Galv
Galv
Galv
Galv
C
C
D
D
16"
6100.89R ST235 / 80R16 16 x 6.00
6 - 5.5
Galv
D
16.5 x 6.75 6 - 5.5
16.5 x 6.75 6 - 5.5
16.5 x 6.75
8-
Galv
Galv
Galv
E
E
E
C
16.5" 6100.42
D
Finish Rating Picture
6100.97
6100.70
12 X 4.00
8.75 x 16.5
9.50 x 16.5
9.50 x 16.5
5 - 4.5
Galv
A
C
E
Wheel Hardware
E
4
Part #
Type
1003.02
Bolt
1003.01
Nut
1003.03C Nut
Size
Picture
1/2"-20
G
1/2"-20
H
1/2"-20
J
WWW.LOADRITE.COM
H
G
J
ORDERS@LOADRITE.COM
Custom Aluminum Wheel and Tire Assemblies
Tire Size
Wheel Size
12”
7073.31*(R) (S)
LT145/R12E
12 x 4.5
5 - 4.5
Alum
E
14"
7073.15*(R) (S)
ST205/75R14
14 x 6.00
5 - 4.5
Alum
C
7073.07*(R) (S)
ST215/75R14
14 x 6.00
5 - 4.5
Alum
C
7073.19*(R) (S)
7073.21*(R) (S)
ST225/75R15
ST225/75R15
15 x 6.00
15 x 6.00
6 - 5.5
6 - 5.5
Alum
Alum
C
D
7073.30*(R) (S)
ST235/80R16
16 x 6.75
6 - 5.5
Alum
D
15"
16"
B
A
A
*Aluminum
wheel suffix
legend:
B
1-
Part #
Wheel &
Fender
Lug
Finish Rating Picture
Pattern
Diameter
R - Radial
C
S - Bias ply
C
Spare Tire Carriers
Part #
Type
Notes
Picture
1480.00
Non-locking
D
U-bolt
1480.01
With lock
E
1480.03
Boxed, 13" and 14" wheels
F
1480.043
3" tall steel frame
HD
1480.044 Weldment, 4" tall steel frame
G
1480.045 13", 14" & 5" tall steel frame
1480.046 15" wheels 6" tall steel frame
1480.07
Torsion spindle
H
1480.13
Aluminum frame
J
1480.15
Alum. frame, 6-bolt hub
1480.16
Alum. Frame, 5-bolt hub
D
E
F
H
G
J
5
CALL 800-942-2324
FAX 800-577-8832
Fenders
1-
Wheel &
Fender
Part # Letter Width Length Height Arc
Material
Special Notes
Picture
2301.03
Bandit, BZ, LRT, white
7"
6.38"
D
2301.07
Bandit, BZ, LRT, gray
Plastic Tie Down style, white
2301.06
2301.08
Tie Down style, gray
2301.10
29.25”
E
6283.02
Single axle <80", LH and RH
6283.10L
Plastic Single axle >80", w/ light, LH
9.75" 42.00" 12.75"
F
6283.10R
Single axle >80", w/ light, RH
6039.07
G
Steel
C
13.50" 45.00"
13" / 14" Tires
6039.07A
G
Aluminum
A
31.50"
8"
6039.01
A
14.75" 47.50"
14" Tire
Steel
6039.14
R
28.90" 10.63" 38.00"
Standard Utility
C
6039.04
8.5” 24.66” 12.75”
Aluminum Aluminum 2-place WV
1088.04
W
25.00" 6.10" 28.83"
Pontoon and 2-place WV
Steel
6039.30A
T
32.00" 11.20" 41.25" Aluminum Triaxle, center
A
6039.20A
S
33.44" 14.00" 48.00"
Triaxle, outer
A
Aluminum
6039.03A
C
33.50" 14.75" 50.00"
15" Tire
A
6039.08
H
34.00" 16.75" 53.25"
15" / 16.5" Tires
9"
Steel
C
6039.02
B
35.00" 18.50" 57.00"
15" Tire
6039.02A
B
6039.64A SS
32.76" 13.25" 45.56"
Tandem axle
Aluminum
A
6039.65A
TT
30.87" 10.25" 39.06"
Triaxle
6039.66A UU
32.97" 15.75" 50.15"
Single axle
6138.51
67.00" 16.38"
Tandem, 13" / 14" Tires
9.50"
Steel
B
6138.72
72.00" 17.50"
Tandem, 15" / 16.5" Tires
6039.67A VV
34.44" 13.44" 48.96"
10"
Aluminum Triaxle
A
6039.68A WW
32.51" 10.61" 43.15"
H
e
I
g
h
t
B
Length
Width
A
E
C
D
F
6
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Fender Brackets
Material
L bracket
Angle
Angle "U"
Step
Step /
Weldment
Weldment
Extrusion
End cap
Push pin
Angle
Dimensions
2" x1" x 6.5"
2" x 1.75" x 6.4"
1.5" x 2.53" x 6.56"
1.75" x 1.75" x 14"
Notes
14' models
8 Ga.
Replaces “loop” style
1/4"
Light utility
7 Ga.
Tandem, center, 5 STARR
5 STARR aluminum frame
11 Ga.
4.5" x 14"
Universal fenderstep
7 Ga.
4" x 13.38"
Universal utility fenderstep
HD Utility, RH
1/4"
2" x 5" x 10"
HD Utility, LH
11 and 7 Ga. 14.25" x 6.2"
Center fender support
Aluminum
3.45" x 1.64" x 14" Universal step, req. end cover
Plastic
Black end cap w/ logo
Plastic
.300” x .065” x .70 For 1675.10, 4 req’d.
HD Utility, RH, chamfered
7 Ga.
1.6" x 1.6" x 11.5"
HD Utility, LH, chamfered
Pre-galv., RH, chamfered
.164"
1" x 2.31" x 12.12"
Pre-galv., LH, chamfered
Picture
A
C
E
1-
Type
Wheel &
Fender
Part #
1356.016
1356.106
1812.206
6037.006
1599.116
1599.126
1599.566
4274.016
4274.026
1157.616
1599.13A
1675.10
2515.01
1805.116
1805.126
6096.01G
6096.02G
D
F
G
H
J
K
A
C
D
E
G
H
J
F
K
7
CALL 800-942-2324
FAX 800-577-8832
Leaf Spring Axle Weldments and Assemblies
Weldment Load
Type
Part #
Rating
2-
Axles &
Parts
4186.02G
1800#
4186.04G
Str.
4186.516
6098.076
2000#
XXXX.XXX
6098.196
Dip
6098.176
6098.026
6098.206
Str.
Dip
6098.166
6098.036
6098.216
6111.016
2700#
Str.
Dip
Str.
1357.016
6098.226
6098.066
Dip
Str.
6044.01G
3500#
Str.
6044.056
6044.096
6009.006
6044.086
Drop
3700#
6044.106
6008.006
6008.036
Str.
Str.
5200#
Drop
Drop
Tube
Size
Spindle Spring
Idler
Track
Dimensions Center
Assembly
38.5" 51.25” 6090.70
45"
54.5" 6090.92GB
1.5"
x1.5" 1.06" x 1.06" 51"
61.5" 6090.71G
58"
6090.93G
38.5"
6090.45
2"x 2"
1.06" x 1.38" 45"
6090.46
55.75"
6228.18
50"
6227.096
50"
6227.076
58"
6090.26
66.5"
6228.19
62"
6227.086
62"
6227.066
2" x 2" 1.06" x 1.06"
70"
6090.44
72"
6228.20
66.25" 6090.38
66.25" 6090.51
77"
77.5"
6228.30
78.5"
6090.57W
6090.20
58"
72"
Braking
Assembly
Tie Down axle
Bearing protectors
Bearing caps
BT150A hub
BT151A hub
6090.84
BT150A hub, UL snomo
BT151A hub, UL snomo
BT151A hub
6090.84 (F)
BT150A hub
BT151A hub
7” Surge
6090.74
10” Electric
6090.19G (F) 10” Surge
6090.19GF
6227.026 6227.036
10” Surge
2.38" Rd.
74"
6227.046
Electric
6228.22
6228.22B (F) 10” Surge
66.5"
6228.22DB
Disc
6090.12
6090.11G
(F)
10”
Surge
1.06" x 1.38"
2" x 2"
70"
87"
6090.11DG
Disc
6228.21
6228.21B (F) 10” Surge
2.38" Rd.
72"
6228.21DB
Disc
6228.21TBF
2.38" Rd.
77.75"
6228.31
6228.31B (F) 10” Surge
77.75"
6228.31DB
Disc
6228.31TBF
3" x 2"
70"
87" 6090.04
6090.03 (F)
12” Surge
1.25" x 1.75"
3" x 2"
74"
6228.05
6228.05B (F) 12” Surge
(F) Indicates fresh water flush kit availability. Add suffix F to standard part number.
6228.21
Dip style
8
Notes
6090.11G
Straight
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Axle / Spring Assemblies
2030.023
2030.033
2073.07
2073.02
2073.04
2073.05
Notes
ATV 3 place
U 6' wide
ATV 2 place
UL4' wide
SN 4' wide
SN 5' wide
UL 5' wide
U 5' wide
Jon boat, Tie Down style
14' boat and WV, Sure-Lube®
1250 lb. boat trailer, 58" SC
WV1200BZTS, 45" SC
16' boat, bearing prot., 3 leaf
161500 models
6090.92
2-
Springs
Axles &
Parts
Part # Idler Assy.
5003.19
6090.20
5003.20
6227.026
1841.50
6090.26
1812.56
6227.026
1812.57
6227.096
1812.67
6227.086
1812.66
6227.066
5003.18
6090.24
5003.01
6090.70
5003.14B 6090.92GB
5003.16J 6090.93G
5003.14BZ 6090.92GB
9001.16B 6090.71G
5003.17J 6090.93G
Hub Face
Spring
Center
Drop style
Torsion axle
Straight tube
Torsion Axle Assemblies
Part #
6090.26T
6090.28T
6090.28TE
6090.28TS
4271.42
4271.63
6227.37TDR
4271.44
4271.64
6227.37TDR-W
6227.55
6227.55B12
6227.55TDR
6227.55AL
6227.55ALB12
6227.55TDR-W
6226.01
6226.02
6225.01
6225.02
Load
Spindle
Frame Brake
Notes
Rating Dimensions Center Type
2000#
Idler
1.06" x 1.06"
58”
Snomo
2500#
Electric
Surge
Idler
70" Disc
Drum
3750# 1.06" x 1.38"
Idler
74" Disc
Drum
Idler
70" Disc
Drum
5500#
Idler
74" Disc
1.25" x 1.75"
Drum
Disc
70"
Idler
6000#
Disc
74"
Idler
9
CALL 800-942-2324
FAX 800-577-8832
Leaf Springs
Leafs Length Style Capacity Part # Picture
20"
550#
2073.02
A
2
CO
22"
950#
2073.04
3 23.25” SRF 750 # 2073.07
26"
1,600# 2030.033
22"
1,100# 2073.05
4
2,350# 2030.023
B
26"
CO
22"
1,500# 2073.06
5
26"
2,900# 2030.013
A
2-
Axles &
Parts
B
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
Spring Support Brackets and Weldments
Part #
1160.016
1160.216
1549.006
4050.006
4050.026
6052.516
6057.006
6120.006
10
Type
Dimensions
4" x 5.75"
4” x 4.25”
Plate 3" x 3.38"
3" x 8.25"
3.63" x 8.25"
4.5" x 5.25" x 29"
Weldment 4.5" x 5.25" x 65"
Notes
2-3/8” round axle
Spring clamp plate
Equalizer, aligned holes
Equalizer, offset center hole
Single axle, HD, 26" spring
Galvanized tandems
Galvanized triaxles
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Spring Bushings and Kits
Size
20" and 22" springs
Bushing Sets
Equalizer
(each spring)
24" and 26" springs
Nylon, **(2)
9/16" x 1" x 1-1/8"
Nylon, ***(2)
3/4" x 1-1/16" x 1"
Nylon, ***(2)
1/2" x 1" x 1-9/16"
Steel, *(1), ***(1) 9/16" x 11/16" x 2.05"
Nylon, *(2)
1/2" x 11/16" x 1.75"
Nylon
9/16" x 11/16" x 1.75"
Notes
Picture
Includes items with *
C
Includes items with **
A
Includes items with ***
B
White hat, equalizer
Black hat, slipper
Black hat, front
Rolled
Black
White
A
2-
Material
B
Axles &
Parts
Part #
1421.01
1421.02
1421.03
1011.00
1011.01
1011.02
2015.02
2041.01
2041.02
C
Leaf Spring to Axle Hardware Mounting Kits
Part #
Description / Application
Spring to Axle Tie Plate Kit
AX KIT 1
2.38" Round Axle
Spring to Axle Tie Plate Kit
AX KIT 2
2" Square 3500#, 3700# Axle
Spring to Axle Tie Plate Kit
AX KIT 3
2" X 3" Rectangular 5200# Axle
Spring to Axle Tie Plate Kit
AX KIT 4
1-1/2" Square Axle
Spring to Axle Tie Plate Kit
AX KIT 5
2" Square 2700# Axle
Spring to Axle Tie Plate Kit
AX KIT 6
3.00" Round Axle 5200# Axle
Qty.
2
8
4
8
2
8
4
8
2
8
4
8
4
2
8
2
4
8
8
2
8
8
4
Part #
1160.216
2504.03
2510.03
2505.536
1160.216
2504.03
2510.04
2505.536
1160.216
2505.536
2510.05
2504.03
2049.60
1549.006
2504.02
1160.216
2049.50
2505.536
2504.03
1160.016
2504.03
2505.536
2510.48
Kit Contents
Description
Spring Clamp Plate, 4.25" x 4.00" Galvanized
Nut, 1/2" Ny-Lock
U-bolt, 1/2" x 2.44" x 5.5", Round
Washer, 1/2" Flat Galvanized
Spring Clamp Plate, 4.25" x 4.00" Galvanized
Nut, 1/2" Ny-Lock
U-bolt, 1/2" x 2.03" x 5.25"
Washer, 1/2" Flat Galvanized
Spring Clamp Plate, 4.25" x 4.00" Galvanized
Washer, 1/2" Flat Galvanized
U-bolt, 1/2" x 2.03" x 6.75"
Nut, 1/2" Ny-Lock
U-bolt, 3/8" x 1.53" x 3.125"
Spring Clamp Plate, 1-1/2" Galvanized
Nut - 3/8" Ny-Lock
Spring Clamp Plate, 4.25" x 4.00" Galvanized
U-bolt, 1/2" x 2.03" x 4.75"
Washer, 1/2" Flat Galvanized
Nut, 1/2" Ny-Lock
Spring Clamp Plate, 5.75" x 4.00" Galvanized
Nut, 1/2" Ny-Lock
Washer, 1/2" Flat Galvanized
U-bolt, 1/2" x 3.12" x 6.50", Round
11
CALL 800-942-2324
FAX 800-577-8832
Axle Hardware Mounting Kits
Part # Description / Application
Axle Mounting Hardware
Bandit and BZ Models
PK1
2-
Axles &
Parts
PK2
Axle Mounting Hardware
LRT Models
1999 and older
Axle Mounting Hardware
Standard Utility Models
PK6
Axle Mounting Hardware
Heavy Duty Utility Models
PK7
PK10
PK12
PK14
PK16
PK18
PK19
PK20
12
Axle Mounting Hardware
8', 10', 12' Aluminum Torsion
Snowmobile Models
Axle Mounting Hardware
Tilt Aluminum Snowmobile
Models with Brakes
Axle Mounting Hardware
Ramp Aluminum Snowmobile
Models with Idler Hubs
Axle Mounting Hardware
Ramp Aluminum Snowmobile
Models with Brakes
Axle Mounting Hardware
Tandem Alum. 12' and 14',
20' 2000 and earlier
Snowmobile Models
Axle Mounting Hardware
Tandem Alum. 16' and 20'
2001 Model year and later
Snowmobile Models
Axle Mounting Hardware
8', 10' Aluminum Leaf-Spring
Snowmobile Models
Qty. Part #
2
2
10
4
4
10
2
2
4
4
10
2
4
4
4
4
10
2
4
4
10
4
8
10
4
8
10
8
4
10
4
8
2
20
16
8
20
16
2
8
2
10
4
4
4
2
20
4
4
2015.02
2041.01
1003.02
2504.03
2502.32
1003.02
2502.32
2504.03
1011.02
1011.01
1003.02
2015.02
2504.03
2502.32
1011.02
1011.01
1003.01
2015.02
2504.03
2502.32
1003.02
2049.50
2504.03
1003.01
2049.50
2504.03
1003.02
2504.03
2510.05
1003.01
2510.05
2504.03
1606.01E
1003.01
2504.03
2510.05
1003.01
2504.03
1606.076
2510.05
2015.02
1003.02
1011.01
2049.50
1011.02
1160.516
2504.03
2502.32
2510.40
WWW.LOADRITE.COM
Kit Contents
Description
Bushing, Rolled Steel, 11/16" x 2.05"
Bushing, Delrin® 1.00" OD, Black
Lug Bolt (60 Degree Cone)
Nut, 1/2" Ny-Lock
Hex Head Bolt, 1/2" x 3-1/4", Grade 5
Lug Bolt (60 Degree Cone)
Hex Head Bolt, 1/2" x 3-1/4", Grade 5
Nut, 1/2" Ny-Lock
Bushing, Spring Front, .53", Hat
Bushing, Slipper, .725", Hat
Lug Bolt (60 Degree Cone)
Bushing, Rolled Steel, 11/16" x 2.05"
Nut, 1/2" Ny-Lock
Hex Head Bolt, 1/2" x 3-1/4", Grade 5
Bushing, Spring Front, .53", Hat
Bushing, Slipper, .725", Hat
Nut, Lug
Bushing, Rolled Steel, 11/16" x 2.05"
Nut, 1/2" Ny-Lock
Hex Head Bolt, 1/2" x 3-1/4", Grade 5
Lug Bolt (60 Degree Cone)
U-bolt, 1/2" x 2.03" x 4.75"
Nut, 1/2" Ny-Lock
Nut, Lug
U-bolt, 1/2" x 2.03" x 4.75"
Nut, 1/2" Ny-Lock
Lug Bolt (60 Degree Cone)
Nut, 1/2" Ny-Lock
U-bolt, 1/2" x 2.03" x 6.75"
Nut, Lug
U-bolt, 1/2" x 2.03" x 6.75"
Nut, 1/2" Ny-Lock
Plate, Axle Spacer, 5.5 / 6K, 23.37"
Nut, Lug
Nut, 1/2" Ny-Lock
U-bolt, 1/2" x 2.03" x 6.75"
Nut, Lug
Nut, 1/2" Ny-Lock
Plate, Axle Spacer, 31.5", Galv.
U-bolt, 1/2" x 2.03" x 6.75"
Bushing, Rolled Steel, 11/16" x 2.05"
Lug Bolt (60 Degree Cone)
Bushing, Slipper, .725", Hat
U-bolt, 1/2" x 2.03" x 4.75"
Bushing, Spring Front, .53", Hat
Spring Clamp Plt, 4.25" x 4.00" Galv.
Nut, 1/2" Ny-Lock
Hex Head Bolt, 1/2" x 3-1/4", Grade 5
U-bolt, 1/2" x 2.03" x 4.25"
ORDERS@LOADRITE.COM
Hub /
Cups
6042.18
N/A
6042.15
Hub w/ Capacity
Brgs
1409.01 1250#
6042.33 1350#
1409.04 1350#
6042.07 1409.06
1350#
6042.08 1409.08
1350#
N / A 1409.20
N / A 1409.21
6042.32 1409.22
1409.09
6042.02
1409.10
1350#
1350#
1500#
1750#
6042.34
6042.29 1409.18
6042.17 1409.11
N / A 1409.17
1850#
1850#
2600#
3000#
1750#
Bearing Stud
Size
Pattern
1.00"
1.06”
1.06"
1.06"
1.06"
1.06"
1.06" x
1.38"
1.25" x
1.75"
Notes
Picture
4 - 4.0" 5.56" flange diam.
TDE, Super-Lube®
5.56" flange diam.
BT150A, 3.5" high, 5.56" flange,
8" wheel
BT151A, 3.5" high, 6.50" flange,
10", 12", and 13" wheels
Torsion, idler w/ disc, fits rotor
5 - 4.5"
Torsion, idler
TDE, SuperLube® hub
1.719" seal ID, round axle
1.693" seal ID, 2" x 2" square
axle
TDE, with bearings
1.693" seal ID, fits cap-style rotor
A
A
3-
Part # Part #
Hubs &
Spindles
Idler Hubs with Bearings and Seals
B
C
B
C
D
E
6 - 5.5"
D
E
4265.26TD
4265.05
4265.05TD
Hub Drums ,Rotors with Bearings and Seals
Part #
Part #
Rotor w/
Drum w/
6042.24
4265.85
6042.13
4265.26TD 6042.13TD
4265.05
6042.27
4265.05TD 6042.27TD
ID Rating Bearing Size
7"
10"
10"
12"
12"
1350 #
1750 #
1750 #
3000#
3000#
Stud Bearing
Pattern
Kit
Mfr.
1.06" x 1.06"
1419.01
Reliable
1.06" x 1.38" 5 - 4.5" 1419.03
1.06" x 1.38"
TDE
1.25" x 1.75"
1419.10 Reliable
6 - 5.5"
1.25" x 1.75"
TDE
6042.01
13
CALL 800-942-2324
FAX 800-577-8832
Complete Bearing Kits - One Wheel
Part #
Description / Application
Fits 1.06" straight spindle
Bandit, Outlaw, Li'l Rider
1419.01
Pontoon, Snomo w/o brakes
Fits 1.06" x 1.38" tapered spindle
with 1.719" diameter seal
1419.02
2.38" Round straight axle
3-
Hubs &
Spindles
Fits 1.06" x 1.38" tapered spindle
with 1.684" diameter seal
2" x 2" Square drop axle
1419.03
Fits 1.25" x 1.75" tapered spindle
6 bolt LR hub
through 06/98
1419.04
3" x 2" Rectangular drop axle
Fits 1.25" x 1.75" tapered spindle
8 bolt LR hub
3" x 2" Rectangular drop axle
1419.05
1419.06
Fits 1.00" straight spindle
Some non-LR models
Fits most .75" x 1.25" tapered spindle
Some non-LR models
1419.07
1419.09
Fits .75" straight spindle
Some non-LR models
Fits 1.25" x 1.75" tapered spindle
6 bolt LR hub
after 06/98
1419.10
3" x 2" Rectangular drop axle
Hub Bearing Kit, 6 Bolt 2600#
2056.02S
14
Kit Contents
Qty.
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
Part #
6059.01
6059.51
2051.10
6059.01
6059.51
6059.04
6059.54
2051.08
6059.01
6059.51
6059.04
6059.54
2051.06
6059.02
6059.52
6059.05
6059.55
2051.02
6059.03
6059.53
6059.05
6059.55
2051.02
6059.06
6059.51
2051.10
6059.02
6059.52
6059.07
6059.56
2051.20
6059.07
6059.56
2051.10
6059.05
6059.55
6059.10
6059.57
2051.02
6059.05
6059.55
6059.02
6059.52
2051.02
Industry
L44649
L44610
12192TB
L44649
L44610
L68149
L68111
171255TB
L44649
L44610
L68149
L68111
168255TB
L67048
LM67010
25580
25520
21334TB
14125
14276
25580
25520
21334TB
L44643
L44610
12192TB
L67048
LM67010
LM11949
LM11910
15234VB
LM11949
LM11910
12192TB
25580
25520
15123
15245
21334TB
25580
25520
L67048
LM67010
21334TB
WWW.LOADRITE.COM
Description
Bearing, 1.06" x 1.98"
Race, 1.98"
Seal, LR 2700# axle
Bearing, 1.06" x 1.98"
Race, 1.98"
Bearing, 1.38" x 2.36"
Race, 2.36"
Seal, LR 3500# round axle
Bearing, 1.06" x 1.98"
Race, 1.98"
Bearing, 1.38" x 2.36"
Race, 2.36"
Seal, LR 3500# square axle
Bearing, 1.25" x 2.33"
Race, 2.33"
Bearing, 1.75" x 3.26"
Race, 3.26"
Seal, LR 5200# axle
Bearing, 1.25" x 3.72"
Race, 2.72"
Bearing, 1.75" x 3.26"
Race, 3.26"
Seal, LR 5200# axle
Bearing, 1.00" x 1.98"
Race, 1.98", L44610
Seal, LR 2700# axle
Bearing, 1.25" x 2.33"
Race, 2.33"
Bearing, 0.75" x 1.78"
Race, 1.78"
Seal, fits most 1-1/4" spindle
Bearing, 0.75" x 1.78"
Race, 1.78"
Seal, LR 2700# axle
Bearing, 1.75" x 3.26"
Race, 3.26"
Bearing, 1.25" x 2.44"
Race, 2.33"
Seal, LR 5200# axle
Bearing, 1.75" x 3.26"
Race, 3.26"
Bearing, 1.25" x 2.33"
Race, 2.33"
Seal, LR 5200# axle
ORDERS@LOADRITE.COM
Bearing Caps and Spindle Covers
OD Picture
1.505"
1.980"
A
1.980"
B
1.980"
C
2.441"
2.441"
2.441"
D
2.441"
2.716"
E
B
A
D
3-
Description
Dust cap
Plastic protector
Chrome SureLube®
Sup-R-Lube® assembly
Dust cap
Plastic grease cap
Dust cap, Sup-R-Lube®
Bearing protector, Sup-R-Lube®
Plastic grease cap
Rubber Grommet, Sup-R-Lube®
E
C
Roller Bearings
Part #
6059.01
6059.02
6059.03
6059.04
6059.05
6059.06
6059.07
6059.10
Industry
44649
67048
14125
68149
25580
L44643
LM11949
15123
ID / OD
1.06" x 1.98"
1.25" x 2.33"
1.25" x 3.72"
1.38" x 2.36"
1.75" x 3.26"
1.00" x 1.98"
0.75" x 1.78"
1.25" x 2.44"
Hubs &
Spindles
Part #
1259.00
2019.04
2019.05
2019.11
1170.11
2019.09
2019.14
2019.15
2019.10
2019.07
Bearing Races
Part #
6059.51
6059.52
6059.53
6059.54
6059.55
6059.56
6059.57
Industry
L44610
LM67010
14276
L68111
25520
LM11910
15245
OD
1.98"
2.33"
2.72"
2.36"
3.26"
1.78"
1419.03
Wheel Seals
Part #
Industry
2051.02M
2051.05
2051.06M
2051.08
2051.10
2051.10M
2051.14
2051.17
2051.19
2051.20
2051.22
2051.23
2051.27
2052.26
21334TB
168233TB
168255TB
171255TB
12192TB
12192TB
15191VB
22333VB
11174VB
15234VB
13194TB
21325TB
Application Notes
LR 5200# axle, metal
LR 3500# square axle, metal
LR 3500# round axle, plastic
LR 2700# axle, plastic
LR 2700# axle, metal
SL-150-1
Fits 3/4" spindle
Fits most 1-1/4" spindle
Fits TDE 1850# spindle
22333TC Fits TDE 3000# spindle
Dimensions
Shaft OD Width
2.125" 3.377" .438"
1.688" 2.332" .313"
1.687" 2.563" .500"
1.719" 2.565" .500"
1.219" 1.983" .500"
1.219" 1.983" .500"
1.50" 1.987" .188"
2.25" 3.376" .375"
1.125" 1.784" .469"
1.50" 2.332" .406"
1.372" 1.979" .432"
2.125" 3.269" .500"
1.721” 2.563" .500"
2.25" 3.376" .500"
15
CALL 800-942-2324
FAX 800-577-8832
Spindles
Part #
Type Bearing Size
1263.01
6098.01
1.06"
6043.07
3-
Hubs &
Spindles
6043.03
1.06" x 1.38"
Taper
6043.05
1.25" x 1.75"
6043.12
1.06" x 1.38"
6043.13 Bolt-in 1.25" x 1.75"
6043.14 taper 1.06" x 1.38"
6043.15
1.25" x 1.75"
Seal
Length Thread
Notes
Picture
Size
1.230" 5.25"
LR small
1.230" 5.72" 13/16"-20 LR 2700# axle, Sure Lube®
Pont., w/ brake flange, Sure
1.230" 7.23"
1.00"-14
Lube®
1.684" 7.50" 13/16"-20 LR 3500# axle, Sure Lube®
A
2.125" 9.50" 13/16"-20 LR 5200# axle, Sure Lube®
1.721" 8.30"
1"-14 TDE torsion, 3700# axle
2.25" 10.218"
1"-14 TDE torsion, 6000# axle
1.721" 8.30"
1"-14 TDE, 3700# axle, 12 pos’n.
2.25" 10.218"
1"-14 TDE, 6000# axle, 12 pos’n.
OAL
A
Seal
Inner
Bearing
Outer
Bearing
Spindle Parts, Loose
B
A
G
C
H
D
16
Notes
Zerk fitting, Sup-R-Lube®
Cotter key, Sup-R-Lube®
Washer, round ID
Picture
A
B
Washer, "D" ID
Washer, tooth ID
Washer, retainer, tang, TDE
Castle nut
Retaining ring, 5200# spindle
Spindle nut
TDE 12position
Cotter pin
Wear sleeve, TDE 17291
F
H
D
C
E
G
Spindle Hardware Parts Kit
E
1408.02
Part #
Size
2019.08
1170.10
1159.01
1.00"
1159.04
1159.02
1159.03
13/16"
1170.16
1170.01 1.00"-14
1170.02
.81"
1170.03
SN813
1170.17
1170.09 1/8" x 2-1/4"
2051.31
1.71"
F
Part # Size
Contents
1408.02
Nut, retainer, "D" washer, cotter pin
1408.04
Nut, retainer, tooth washer, cotter pin
.81" Nut, tang washer; for TDE 1750# spindle
1408.05
before 02/09
1408.07
12 pos’n. nut, washer, cotter pin; after 02/09
1408.03 1.00" Nut, Washer, Cotter pin
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Hydraulic Surge Brake Actuators
Capacity Ball Size
Special Notes
Picture
A
6,600 lb.
2.00" Drum brake
7,000 lb.
2.00" Disc, w/ reverse lockout
B
Drum brake
2.00"
Tie Down 8,000 lb.
Disc, w/ reverse lockout
8,500 lb.
C
Drum brake
2.31"
Titan
Gooseneck style
Demco
D
10,000 lb.
Disc, w/ reverse lockout
Lunette
Tie Down
Disc, w/ reverse lockout
E
12,500 lb.
Tie Down
Drum brake
2.31” Drum brake
Titan
N/A
Lunette eye, welded Whaler models
H
20,000 lb.
2.31" Disc, w/ reverse lockout
F
Carlisle
Electro-hydraulic
G
Brakes
Mfr.
4-
Part #
6080.06
6080.25
6080.27
6080.26
6080.31
6080.32
6080.026
6080.52
6080.55
6080.28
6080.29
6080.03
6080.11
6080.036
6080.53
B
A
C
D
F
E
H
G
17
CALL 800-942-2324
FAX 800-577-8832
Actuator Parts
Part #
1422.10
1422.01
84258
1422.07
1422.24
1422.18
1422.17
1422.20
A
B
4-
Brakes
C
D
E
F
G
Description
Damper replacement kit
Filler cap
Master cylinder boot
Master cylinder replacement kit
Pushrod replacement kit
Release handle replacement kit
Shoulder bolt replacement kit
Stop and spring replacement kit
6080.53HBA-CAM Adapter, Ford, electro-hydraulic
6080.53-CAP
Filler cap, electro-hydraulic
05408
Breakaway cable assembly
10271
Master cylinder assembly
6080.52-MCK
Master cylinder replacement kit
47252C
Ball latch kit
47254
Breakaway cable assembly
50305
Breakaway cable assembly
47258
Filler cap and seal
6080.92
Filler cap
47268
Master cylinder assembly
50301
Pin, safety cable
43358
Ball latch kit
23383
Ball latch kit, hand wheel
43584
Ball latch kit, Lever-Lock
43595
Breakaway lever assembly
12426
Damper
23362
Damper
17556
Filler cap and gasket
44807
Filler cap, 1-1/4"-18 NEF
12503
Filler cap, 1-5/8"-18 NEF
23414
Gasket, master cylinder
10555
Hook, S
1051.04
Hook, S, safety chain
43951
Master cylinder assembly
23744
Master cylinder assembly, 1-1/4"
15026
Master cylinder repair kit
10187
Master cylinder repair kit, 1-1/4"
23463
Pushrod replacement kit
Mfr.
A
Atwood
Carlisle
Demco
Tie Down
WWW.LOADRITE.COM
B
66, 80
70
66, 80
80
60
60
L
K
H
60
6, 10
60
Titan /
Dico
10
60
60
10, 20
60
D
C
J
G
F
60
K
18
6
70, 80
66, 80
H
J
Model Picture
L
E
ORDERS@LOADRITE.COM
Drum Brake Kits
Application
Size / Finish Actuator
7",
Painted
6.6k
Single axle,
hydraulic
10", Galvanized 12.5k
6.6k
10", Galvanized
7.5k
Single axle,
hydraulic
12.5k
12", Galvanized
6.6k
7", Painted
N/A
Second axle,
10", Galvanized N / A
hydraulic
12", Galvanized N / A
4-
Part #
6201.086
6201.256
6201.246
6201.250
6201.276
6201.336
6201.30
6201.406
6201.506
Brakes
Kits include brake assemblies, drums,
Hydraulic Disc Brake Kits
Part #
6201.139
6201.137
6201.142
6201.143
6201.141
6201.140
6201.601
6201.602
6201.70
4265.07
4265.08
Application
Tandem axle, 5 bolt
Single axle, 5 bolt
Single axle, 5 bolt
Tandem axle, 5 bolt
Second axle, 5 bolt
Single 2" x 2" axle, no actuator
Single axle, 6 bolt
Second axle, 6 bolt, Reliable
Second axle, 6 bolt, TDE
Caliper, bracket, rotor, pads, 5 bolt
Caliper, bracket, rotor, pads, 6 bolt
Actuator
6.6k
7k
8k
N/A
12.5k
N/A
Tie Down
19
CALL 800-942-2324
FAX 800-577-8832
Complete Backing Plate Assemblies
Size
Type
Finish
7"
Surge
10”
12"
Surge Galv-X
10" x 2-1/4" Electric
Components
Shoes / Wheel Cylinder
Wheel Set Left
Right
6012.01
6012.02
8780
6014.04TD 6014.03TD 1411.11TD 9777.6A 9776.6A
6015.12TD 6015.11TD 1411.12TD 9777.6A 9776.6A
6013.03
6013.04
Left
Right
4-
Brakes
6012.02
6013.04
6013.03
9776.6A
1411.11TD
Brake Line Kits
Kit includes steel lines, rubber flex hoses, fittings and
mounting brackets to accommodate application
Part #
Application
6016.10 Complete Kit, Single Axle
6016.10S Complete Kit, Single Axle, Stainless
6017.10 Complete Kit, Tandem Axle
6017.10S Complete Kit, Tandem Axle, Stainless
2513.00 Flush Kit, Each Axle
6016.10
2513.00
Brake Lines and Fittings
1021.02
1021.03
20
Part #
1021.06
1021.11
1021.03
1021.05
1021.18
1021.26
1021.02
1021.08
1021.01
1021.16
1021.13
1021.096
2031.04G
Description
Rigid steel w/ fittings, flexible, 6"
Rigid steel w/ fittings, flexible, 12"
Rigid steel w/ fittings, flexible, 18"
Rigid steel w/ fittings, flexible, 57"
Rigid steel w/ fittings, flexible, 77"
Rubber flex hose assembly, 14"
Rubber flex hose assembly, 18"
Rubber flex hose assembly, 24"
Fitting, brass, 3/16", M-F
Fitting, brass, 3/16", union tee
Fitting, brass, 3/16", inverted tee
Brake line clip, plated
Brake line holder, bent
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Hydraulic Disc Brake Parts
System Picture
A
TDE
Reliable /
Kodiak
A
C
TDE
Reliable
TDE
B
D
E
Reliable /
Kodiak
TDE
Reliable
TDE
C
B
E
D
A
Electric Breakaway Kits
Part #
Notes
Picture
6220.01 Battery, case, and switch A, B, C
6220.13 Breakaway switch
C
6220.18 Replacement battery
A
Brakes
Description
Reverse lock out solenoid
Reverse lock out solenoid, in-line
Reverse lock out solenoid
Caliper assembly, RH
Caliper assembly, LH
Caliper, RH / LH, 5 and 6 stud
Caliper bracket, cap-style rotor
Caliper bracket, integral rotor, 5 stud
Caliper bracket, cap or int. rotor, 6 stud, Galv-X
Caliper bracket, LH, 6 stud
Caliper bracket, RH, 6 stud
Rotor, 3700#, 5 stud
Rotor, cap-style, 6 stud
Rotor, cap-style, 5 stud
Friction pads, one wheel, inside
Friction pads, one wheel, outside
Friction pads, one axle
Metric / SAE adapter, M10 x 3/8"-24
Bleeder valve, caliper
Fitting, inverted flare inlet elbow
Fitting, brass, .041" orifice
Caliper bolt, 6 stud
Caliper bolt, stainless, 7/16" hex head
Caliper bracket bolt, 7/16”-14 x 1”, Grade 5
Caliper bracket nut, 7/16” Ny-Lock
4-
Part #
6220.14
6220.15
6220.16
4265.61
4265.62
4265.19TD
4265.23
4265.25TD
4265.06TD
4265.24L
4265.24R
4265.85
4265.04
4265.21
4265.03TD
4265.04TD
4265.82
1021.15
4265.01TD
4265.02TD
1021.23
4265.24B
4265.22TD
2506.10
2504.04
B
A
C
C
6220.01
21
CALL 800-942-2324
FAX 800-577-8832
Tongues
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
5-
Frames
22
Part #
Finish
Tube Length Wall
Notes
PWC, 3/8” hole
4089.606 Hot Dip
54" .072" BZ, for cover plate
2453.146
Hot Dip
4089.706
BZ, 9/16" holes
3" x 2"
4089.656
90" .072" 14', Class II coupler
4089.666 Hot Dip
Big hole
120" .083"
4089.646
16', Class I coupler
6276.046
24" .095" MC1800
1827.206
61"
Full-frame
.095"
4090.516
61.38"
WV Double
1812.196
65.5" 1/8" Lite Utility
6276.056 Hot Dip 3" x 3"
.095" Skiff
72"
1827.616
.120"
1805.036
84" .120" 5' x 10' Utility
6276.036
94"
16'
.095"
4090.036
144"
16"
60"
4062.306
Full-frame
.095"
4097.016
70"
4062.216
.120"
1827.546 Hot Dip
Aluminum model
1815.806
1/8" 3600 aluminum
72"
4016.046
3/16"
4016.046
3/16"
1721.00A
Snowmobile
Aluminum
80"
1/8"
4242.07A
Snowmobile, welded “E”
4017.016
1/8"
4" x 3"
4017.036
3/16" Pontoon
4016.016
84”
1813.526
1/8" 6' x 12' HD Utility
1815.296
.120" 18' - 20' Aluminum
1827.726
1/8"
Hot Dip
4062.506
.120”
4017.146
96”
4016.076
3/16”
4016.036
108”
1815.276
24' Aluminum
4017.056
123"
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Tongues
Hot Dip
Tube Length
70"
78"
84"
85"
90"
95"
5" X 3" 96"
102"
.120"
Notes
Pontoon
.110”
.134"
.148"
1/4"
.134"
SOME ITEMS
.188"
108"
1/4" Tandem roller
112" .188" 32' pontoon
114"
126" 1/4" Tandem bunk
90" 3/16"
4062.076
4062.096
4104.036
4293.066
4063.046
4293.076
4104.026
4063.056
4104.016
4104.046
Wall
95"
Hot Dip
6" x 3"
96"
102"
108"
114"
120"
126"
144"
168"
REQUIRE COMMON
CARRIER SHIPPING
.188"
.250"
1/4" 27' Triaxle
.120"
.188"
.120"
1/4" 30' Triaxle
.188"
1/4" 34' Triaxle
1/4"
Frames
Finish
5-
Part #
4097.036
4062.226
4017.136
4016.096
4293.016
4062.026
4016.106
4293.026
4016.086
4063.016
4062.056
4293.036
4063.026
4293.056
Swing Tongue Kit
Part #
Description
4272.81 4" x 3" tongue, cast, plated
Tongue Skids
Part #
Description
Picture
1161.00A Aluminum extrusion
A
4053.006 Galvanized steel
B
A
B
23
CALL 800-942-2324
FAX 800-577-8832
Tongue Angles and Junction Plates
Part #
1827.266
2001.016
2001.046
1827.076
2001.026
2001.036
1713.01A
1713.02A
1823.146
1823.136
1823.116
1823.126
Type
Material
Dimensions
1.5" x 2" x 17.25"
2.5" x 2.5" x 20"
3/16"
2.5" x 2.5" x 70"
Angle
1.5" x 2" x 15.5"
1/4"
3" x 4" x 22.5"
3/8"
3" x 4" x 32.75"
.19" extruded 1" x 3.5" x 52.25"
Angle
aluminum 1" x 3.5" x 52.25"
2.75" x 10.62"
4 Gauge
2.75" x 10.62"
Plate
3.5" x 10.62"
1/4"
3.5" x 10.62"
Notes
90" - 96" full-frame
Motorcycle tie down
80" full-frame
Chamfered edge
A
Snomo, RH tongue guide
Snomo, LH tongue guide
LH Tongue Jct., 18' - 20' AB models
RH Tongue Jct., 18' - 20' AB models
Tongue Jct., 22' - 24' AB models
Tongue Jct., 26' - 28' AB models
B
B
A
5-
Frames
Couplers
C
Part #
6019.12
6019.01
6019.02
6019.03
Class Width Ball
Notes
2"
II
2.00" Plated
III
Painted
3"
Weldment,
6019.516
IV
2.31"
painted
6019.53
Adjustable
D
F
24
Picture
WWW.LOADRITE.COM
E
G
Picture
D
F
F
ORDERS@LOADRITE.COM
Safety Cable and Chain
Size
3/16" x 30"
Red
3/16" x 36"
1/4" x 30"
Clear
1/4" x 36"
1/4" x 30"
White
1/4" x 36"
Black 1/4" x 48"
5/16" x 30"
Blue
5/16" x 36"
7/16" x 30"
Black
7/16" x 36"
3/16" x 18"
3/16" x 24"
Chain 3/16" x 30"
5/16" x 18"
1/4"
Notes
w/ 13/32" hook
Loop end
w/ 13/32" hook
Loop end
w/ 7/16" hook
No hook
w/ 7/16" hook
No hook
w/ 7/16" hook
No hook
w/ 7/16" hook
No hook
w/ 7/16" hook
Part #
1051.02
1051.03
1052.02
1052.01
Type
SHook
Size
Notes Picture
13/32" Medium
7/16" Large
Quick 1/2"
A
Link
3/8"
A
Loop end
Loop end
w/ 7/16" hook
Frames
Color
5-
Part #
6229.03
6229.09
6229.02
6229.10
6229.05
6229.13
6229.06
6229.14
6229.15
6229.17
6229.16
6229.18
6229.19
6229.07
6229.08
6229.11
6229.12
6104.01
6104.02
6104.03
4055.08
4055.05
Chain and Accessories
Winch safety
Hitch Accessories
Part # Description
Notes
Picture
1468.04 Retainer Clip Cl II
1483.00
Fulton #HL
B
Lock
UTL100
Universal
C
B
C
Jacks
Part #
6081.15
6081.56
6081.06F
Rating
Notes
800#
Swivel
1000#
1200# Footed
Picture
D
E
F
F
D
E
Jack Replacement Parts
Part #
Notes
1394.01 6" frame swivel adapter hardware
1219.006 Strap, .25 x 1" x 7.5"
1394.01
25
CALL 800-942-2324
FAX 800-577-8832
Crossbars
Part # Finish
Tube
Length
7108.55G
1.56" x 3.57" 12.55"
1546.026
1510.046
Hot Dip
1546.616
Wall
10 Ga.
1.34" x 3.26"
37.75"
1.34" x 3.26"
54.75" 11 Ga.
1.34" x 3.26"
60.00"
.134"
76.00"
.120"
2496.076
2496.066
1375.066
1375.076 Hot Dip
2" x 2"
86"
Shape
.105"
Channel
95.75"
.120"
102.00"
41.50"
4007.616
45.75"
4007.646
4007.046
Catamaran
Catamaran, diagonal holes
Pontoon
Straight Diagonal holes
50.63"
5-
Frames
Hot Dip
2" x 3"
Catamaran
Pontoon
Straight Front crossbar, 161201
Bent
.083"
51.78"
Bent
55.19"
BZ
Motorcycle
Straight Full-frame, 80" wide
Full-frame, 80" wide
Straight 14' - 16'
4007.016
62.81"
.105"
1140.006
63.5"
.095"
4304.066
65"
.120"
2489.036
75.38"
.095"
Bent
Full-frame, 90" wide
Straight V-sail
Straight
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
26
Rear crossbar
Wire holes
1519.006
1375.056
1547.026
1681.546
Front crossbar
Front crossbar, dipsy double
1375.096
4007.026
Notes
Tongue cross, 14' Bandit
WWW.LOADRITE.COM
Underslung, aluminum models
WV double
ORDERS@LOADRITE.COM
Crossbars
65.50"
67"
66.86"
68.50"
69.19"
71.00"
71.33"
72.61"
73.33"
73.81"
74.25"
Wall
3/16"
Shape
Bent Weldment
Notes
.095" Straight Full-frame, 90" wide
.120"
11 Ga.
Satellite x-bar, alum. Models
6-hole plates, 7"x3.5"x1/4", 90" wide
Standard, 96" wide models
3/16"
Straight HD option
7 Ga.
Drop 4-hole plates, 7"x3.5"x1/4"
11 Ga.
Straight Whaler, 96" wide, SA, Skiff full-frame
.120"
Full-frame, 96" wide
Bent
Stiffener weldment
1/8"
.120"
Bent
Weldment
.095"
Straight
1/8" Straight Whaler, 102" wide, SA
.120"
Bent Weldment
3/16"
Straight
.120"
Bent Full-frame, 102" wide
Bent
Frames
Length
38.5"
61.38"
62.81"
63.14"
63.50"
5-
Part # Finish Tube
4296.616
4006.186
4008.136
4304.096
4304.136
4008.006
1628.006
4304.106
4304.116
4006.166
Hot Dip 3" x 3"
4006.136
4296.666
4304.126
4296.706
4296.846
4006.146
4296.596
4296.646
4304.176
4006.156
Crossbar Hanger Brackets
Part # Material
Dimensions
3/16"
1.69" x 2.68" x 4.5"
Galv
4209.526
3" x 4.365" x 6.625"
10 Ga.
4209.516
3" x 4.37" x 6.63"
1776.046
4203.006
3" x 4.365" x 6.625"
4203.506
3/16" 3" x 4.365" x 6.625"
Galv
4203.516
3" x 4.365" x 6.625"
4260.006
3" x 4.365" x 6.625"
Hole Sets Positions
7/16" (3)
--
7/16" (3),
3 Slots
3
7/16" (3),
3 Slots
3
Notes
Picture
Bandit, 81*, radiused edge
3" frame, welded pivot stop
4" frame, welded pivot stop
Large, 5" and 6" frame, welded
pivot stop and washer, 3" hole CL
to pivot top
Large, 5" and 6" frame, welded
pivot stop and washer, triaxle rear
Large, 5" and 6" frame, welded
pivot stop and washer, 8000# rear
Large, 5" frame, welded pivot stop
A
B
C
Order hardware
separately.
A
B
C
27
CALL 800-942-2324
FAX 800-577-8832
Taillight Assemblies
Part #
1090.24
1090.25
1260.01LD
1260.01
1260.02LD
1260.02
1090.05LD
1090.05
1090.06LD
1090.06
6136.01
6136.02LD
6136.02
6136.02LD
7053.01
A
B
C
Description
Picture
Taillight Petersen 440 RH
Taillight Petersen 44051 LH
Under 80", RH, Bandit, BZ, LRT, Utility, LED
Under 80", RH, Bandit, BZ, LRT, Utility
B
Under 80", LH, Bandit, BZ, LRT, Utility, LED
Under 80", LH, Bandit, BZ, LRT, Utility
Over 80", RH, gasketed, 5 STARR, LED
Over 80", RH, gasketed, 5 STARR
A
Over 80", LH, gasketed, 5 STARR, LED
Over 80", LH, gasketed, 5 STARR
Over 80", RH, low profile
C
Over 80", LH, low profile, LED
D
Over 80", RH, low profile
Over 80", LH, low profile, LED
Oval stoplight, grommet and plug, snomo
E
D
Marker Lights
6-
Lights
Part #
Description
Picture
4046.04LD Clearance light, Wesbar, amber, 24" lead, LED
4046.04
Clearance light, Wesbar, amber, 24" lead
G
4046.05
Clearance light, Wesbar, amber, 24" lead, LED
4046.10
Clearance / marker light, Petersen, 24" lead
4046.14
Clearance light, recessed, red
7053.02
Clearance light, red, 15" leads
7053.03
Clearance light, amber, 15" leads
4046.02
Marker light, Petersen, 12" lead, amber
F
4046.02LD Marker light, Petersen, 12" lead, LED
4046.15
Marker light, plastic fender, with grommet
H
4108.04
Marker light, round, amber
4108.05
Marker light, round, red
4046.05
Side marker light, bubble, red, stud
4046.06
Side marker light, sealed, red, stud
4046.07
Side marker light, sealed, amber, ear
4046.11
Side marker light, submersible, red, stud
4046.03
Side marker light, flat, red, stud
4108.06
Grommet, round side marker
4047.01
Rear 3-bar, chrome
J
4047.01LD Rear 3-bar, chrome, LED
E
F
G
H
J
L
K
28
Miscellaneous Lights and Reflectors
Part #
1319.00
4047.01
4109.01
4109.02
4109.51
4036.25
Description
Picture
License plate bracket / light for snomo
3 bar light, chrome
J
Reflector, amber, 1-1/2" x 3-1/4"
K
Reflector, red, 1-1/2" x 3-1/4"
Reflective tape, red and white, per foot
Wiring tester
L
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Wiring Harness Assemblies
H
J
L
D
M
K
N
F
E
G
Lights
Description
Picture
18", Flat 4, trailer end repair
G
4', Flat 4, vehicle end harness connector
F
18", Flat 5, trailer end repair
B
4', Flat 5, Vehicle end harness connector
A
Adapter - 7 round to 4 flat
Adapter - 7 round to 5 flat
C
Connector, 7 way, snowmobile
D
Connector, 7 prong flat, RV
Cable, 7 conductor, snowmobile
Stress relief, snomo electric brake
Harness, front snowmobile assembly
Harness, rear snowmobile assembly
Ring terminal, 1/2", bare, 14-18 ga.
M
Butt connector, 12-10 gauge, yellow
Butt connector, 16-18 gauge, red
N
Butt connector, 16-14 gauge, blue, silicone filled
Scotch-Lock® connector, blue
L
Female quick disconnect, 18-20 gauge, red
Wire loom, 3/8" ID split plastic
K
Wire, 2 conductor, 14 ga.
18' Wire harness
22' Wire harness
E
27' Wire harness
33' Wire harness, 5 flat, disc brakes
H
27' Wire harness, 5 flat 5, disc brakes
40' Wire harness
Wire clip - Thick grip, frames, etc.
Wire clip - Thin grip, fenders, etc.
Wire clip - Nylon, screw mount
Grommet, 3/8"
Grommet, 1/2"
Grommet, 3/8"
J
Grommet, 5/8"
Grommet, 7/8"
Tie wrap, black, .090" x 3.75"
Tie wrap, black, .30" x 15.25"
H
Tie wrap, black, .30" x 21.50"
Tie wrap, black, .18" x 14"
6-
Part #
4036.12
4036.11
4036.19
4036.20
1352.04
1352.05
1352.00
1352.10
1354.00
2323.55
1750.06
1750.05
2323.05
2323.03
4036.09
4036.16
2507.10
2323.04
2336.02
1355.00
4036.15
4036.03
4036.06
4036.17
4036.18
4036.04
2512.01
2512.01B
2512.02
1000.01
1000.02
1000.07
1000.03
1000.05
1005.01
1005.00
1005.04
1005.05
H
C
A
B
29
CALL 800-942-2324
FAX 800-577-8832
Light Kits
Each kit includes tail and marker lights, harness, license plate
bracket, 4' trunk connector, and 3 light bar (as applicable)
Part #
Description
1469.01
Over 80", 26' harness, low profile lights
1469.01LD Over 80", 26' harness, low profile lights, LED
1469.08LD Over 80", 26' harness, w/ 3-bar, LED
1469.04
Under 80", 20' harness
1469.05
Over 80", 27' harness, low profile lights
A
C
B
D
F
G
H
6-
Lights
E
Light Brackets and Fender Steps
Part #
1010.00G
1010.01G
1191.51G
1262.00G
1782.00G
2016.01
1778.016
2250.076
2250.106
2250.096
5001.026
5001.016
6134.016
6134.026
6134.036
6134.046
6135.036
6135.046
6135.916
6135.926
30
Type
3 Bar light
Material
14 Ga.
Clearance light 11 Ga.
12 Ga.
Marker light
11 ga.
License plate
Light bar
1/4"
1/4"
Taillight
11 Ga.
11 Ga.
Dimensions
4.89" x 12.75"
4.86" x 9.75"
1.25" x 2.38" x 3.18"
1" x 3.5"
1.18" x 3.68"
2" x 2.26" x 10"
2" x 3.13" x 5.88"
2" x 3.13" x 8.88"
5" x 3.42" x 3.42"
9" x 4.91" x 4.91"
4.12" x 8.31" x 11.62"
4.12" x 3.13" x 11.25"
Tail step
10 Ga.
4.41" x 6.00" x 11.62"
4 Ga.
3.38" x 3.12" x 11.00"
Notes
Z bend, 12" keel roller
Z bend, 10" keel roller
Pontoon trailer, 90*, flush kit
30* bend
30* bend
Plastic
BZ, 7 holes
BZ
AB models
5 STARR LH
5 STARR RH
Weldment, RH, 3" and 4" frame
Weldment, LH, 3" and 4" frame
Weldment, RH, 3" and 4" frame
Weldment, LH, 3" and 4" frame
Weldment, RH, 5" and 6" frame
Weldment, LH, 5" and 6" frame
Weldment, LH, large AB models
Weldment, RH, large AB models
WWW.LOADRITE.COM
Picture
A
B
G
C
H
D
E
F
ORDERS@LOADRITE.COM
Winch Stand Weldments and Assemblies
Stop
Style
Notes
Stainless
Roller
Poly
Endcaps
Endcaps
Wedge
Poly
Roller
Boards
Roller
Boards
Winch
Poly
7-
Weldment Tube Tube Degree Winchstand
Winch
Part #
Size Height Angle Assembly
6198.86
2” x 2”
4120.11
16”
Alum.
6198.85
900#
6198.87
4120.096
16”
6198.91
1600#
30
6198.92
900# 12’ Strap
2" x 2"
6198.88
900#
4120.106
26.75”
6198.89
6198.90
1100#
1119.026
58"
90 6198.816
900#
6110.006
6114.366
1600#
20' Strap
6114.306
1100#
6114.406
1300# Strap
6114.486
26"
2" x 3"
60
1827.526
6114.476
1400#
6114.606
20' Strap
6114.686
1700#
28"
6068.806
31
CALL 800-942-2324
FAX 800-577-8832
Winch Stand Weldments and Assemblies
7-
Winch
32
Weldment Tube Tube Degree Winchstand
Winch
Part #
Size Height Angle Assembly
6067.906
6067.806
1700#
20' Strap
6067.936
6067.976
1600#
6062.326 3" x 3" 32"
60 6066.906
6066.806
2000# Cable
6066.816
6066.916
6066.936
1600#
6060.416
35"
60 1828.926
20' Strap
6204.906
1700#
6204.936
6064.906
6064.806
2600#
6060.406
40"
6064.816
Cable
6064.916
6064.996
3200#
50
6064.976
2600#
1830.166
6091.956
n/a
n/a
3" x 4"
6260.906
6260.806
6084.506
40"
6260.976
6260.916
6260.816
3200# Cable
1830.126
52"
90 6091.966
6091.906
6084.006
54"
6091.806
50
6084.606
6260.606
60"
6273.006
6091.996
WWW.LOADRITE.COM
Stop
Style
Roller
Notes
Boards Skiff
Roller
Poly
Wedges
Whaler
Boards Skiff
Boards Pontoon
Pontoon
Boards
Pontoon w/ steps
Roller
Poly
Wedges
Whaler
Roller
Boards Catamaran bowstop
Roller
Poly
Wedge
Poly
Boards Catamaran
Wedge
Poly
Roller
Boards Cat - Old Style
ORDERS@LOADRITE.COM
Manual Winches
Rating
600#
600#
900#
900#
1100#
1400#
1600#
2000#
2300#
2300#
2500#
3200#
Mfr. Speed
Special Notes
Picture
Kit
Handle
D-L
1
Strap incl., 12' PWC
D-L
1
Strap incl., 12'
Shelby
1
Winch post w/ holes
1474.01 1473.02
D-L
1
Strap incl., 12' PWC
A
1473.15 1473.13
D-L
1
Strap incl., 20'
B
1473.15 1473.13
D-L
1
Strap incl., 20'
C
6291
1473.16
D-L
1
Strap incl., 20'
D
6292
1473.17
D-L
2
Strap incl., 27'
E
6294A 1473.18
Strap included
1474.04 1473.04
D-L
2
6294A 1473.18
D-L
2
Strap incl., 27'
F
6294A 1473.18
D-L
2
Strap incl., 27'
G
6294A 1473.18
A
B
F
E
1473.06
7-
G
D
C
Winch
Part #
6089.12
6089.13
6089.05
6089.21
6089.20
6089.22
6089.23
6089.24
6089.09
6089.09
6089.28
6089.29
Winch Cables, Ropes, and Straps
Part #
2413.00
2294.04
1476.21
4034.02
4034.03
4034.01
1475.04
A
Type
Size
Special Notes
Picture
Hook 5000#
Safety for rope
B
1-1/2" x 12' PWC loop
A
Strap
2" x 20'
3/16" x 26'
C
Cable 3/16" x 50'
7/32" x 30'
Clamp
For cable, w/ screws
C
B
33
CALL 800-942-2324
FAX 800-577-8832
Winchstand Parts
A
Can be used in other applications.
Part #
Size
Description
Picture
2045.09
3.62"
Skiff spacer
A
2481.116
Winch support, dimpled
2482.416
4" x 15.68"
Bow stop arm, DLP
D
2482.006
11.78" x 3.3" Bow stop arm, tapered
B
2369.006
13.00" x 2"
Bow roller bar
4064.51A 3/8" x 3" x 26.75" Bow arm, aluminum
C
2206.006 1/4" x 5" x 3.75" Line pull bracket
E
B
C
D
E
Winch Adapter Plates
7-
Winch
Part # Description
Notes
Picture
2064.016
Adapter Power winch, 3 hole
Plate
2064.006
Power winch
1191.06G Bow Rest Skiff bracket, 90*, 1.5" x 4.75", 8 Ga.
1140.106 Winch Rail WV24T and WV25T
Winch Support Caps
Can be used in other applications.
Part #
Size
Description
4042.04 2" x 2"
4042.03 3" x 2"
Black plastic
4042.02 3" x 3"
4042.01 4" x 3"
34
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Individual Rollers
A
B
C
D
E
8-
F
G
Hull
Support
Part # Material OD Width ID
Notes
Picture
4025.00
Black
3"
2-5/8"
1008.09
Poly 2-7/8"
3"
1008.10
1/2" Bow roller
E
Yellow
4025.04
J
4"
3-3/8"
4025.06
Blue
M
1261.05
4-1/2" 1-1/2"
1261.03
Black 5-1/4" 1-3/4"
H
1261.06
4"
1/2" End bell
1261.04
Poly 5-1/4"
2"
N
1261.07
Blue
3.5"
L
1008.23
1/2"
Black
1008.05
3-1/2" 1-1/2"
C
End cap
1008.19
Poly
D
5/8"
3"
1"
1008.19T Yellow
1008.04
4"
Black
Spool
1008.02
7-3/4"
B
1008.10
Poly
4"
V roller
F
1008.11
Poly
2-7/8" 4-5/8" 1/2"
1008.11T Yellow
1008.00
Black
5"
1008.12
Poly
3-3/8" 7-3/4"
1008.12T Yellow
Keel roller
1008.07
Black
8"
1008.06
Poly 3-1/8" 9-5/8" 5/8"
1008.03
10"
Black
1008.01
4" 11-1/2"
A
1008.13
Poly
12"
G
4058.01
Black
3" x 3"
6"
4058.03
Poly
3"
1/2" Wedge
4058.02
Black
7"
4" x 4"
K
4058.05
Poly 4-1/4"
3"
Bow stop, PR3V
K
H
J
L
M
N
35
CALL 800-942-2324
FAX 800-577-8832
Support Rollers
4026.13 roller shown with
1002.51 logo bushing,
sold separately
Part #
Material OD Width ID
Notes
Picture
1008.20
1-1/8" 530R, 5 STARR
C
3"
1008.25
11/16"
Black
5"
4026.01
1-1/8"
B
3-1/2"
Load Rite®
4026.02
5/8"
4026.03
n/a No bushing
Poly
4"
3"
4026.05
5/8" LR, 5 STARR
1008.35
Blue
5/8"
G
5 STARR TPR, black hub
Gray
1008.40
1-1/8"
F
4026.14
5/8" LR TPR, w/ bushing
E
4"
3"
4026.12
LR TPR, w/ bushing
Yellow
4026.12KIT
1-1/8" Black roller conversion
J
4026.13
LR TPR, no bushing
H
C
B
F
E
G
H
8-
Hull
Support
J
36
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Support Roller Assemblies
Roller Roller
Notes
Qty Type
Black
2 Blue Long 12" brackets, 2" crossbar
6076.02
5001.56
16' Lite
6076.01
17' Lite
2
Shorthorn
2
Longhorn
2
6073.00
5001.64
6073.01
6074.00
6074.02
6074.01
6074.05
6072.17
6072.18
6072.01
6072.02
6072.19
6072.20
6156.00
6156.01
6071.03
6071.06
6071.02
6071.07
6071.01
6071.08
6155.00
6155.01
6070.02
6070.01
6070.26
6070.25
6070.24
6070.23
6070.04
6070.03
6070.28
6070.27
6154.00
6154.01
6121.016
6121.026
2
Slider
1
4
I-beam
2
8
Truck
4
Long bar
18
Yellow Std. 10" brackets, 3" crossbar
Black
Blue
9-1/4" roller centers
Yellow
Black
Yellow
12-1/4" roller centers
Blue
Gray
2" pivot bar, RH
Yellow
2" pivot bar, LH
3" pivot bar, RH
Black
3" pivot bar, LH
3" pivot bar, RH
Yellow
3" pivot bar, LH
Black
Replace 1/2 assembly
Yellow
Black
2" pivot bar
Yellow
Black
3" pivot bar
Yellow
Black
4" pivot bar
Yellow
Black
U-bar, 1/2 assembly
Yellow
3" pivot bar, RH
Black
3" pivot bar, LH
3" pivot bar, RH
Yellow
3" pivot bar, LH
3" pivot bar, RH
Blue
3" pivot bar, LH
4" pivot bar, RH
Black
4" pivot bar, LH
4" pivot bar, RH
Yellow
4" pivot bar, LH
Black
Replace 1/2 assembly
Yellow
Black
Triaxle rear assembly
Yellow
8-
Style
Hull
Support
Part #
37
CALL 800-942-2324
FAX 800-577-8832
Roller Pivot Bar Assemblies
Part #
5002.14L
Pivot Bar
Pivot Bar Size
4068.006
2"x2"x31.75
5002.14R
Roller
Quantity
4
(2) 2 Roller
Sliders
5002.03L
4
5002.03R
(2) 2 Roller
Sliders
5002.01
4
4004.016
2"x2"x32"
5002.60L
Roller
Set #2
6071.06
Notes
Yellow, LH
Yellow, RH
Yellow, LH
6072.18
6073.01
Yellow, RH
Yellow
4
5002.02
5002.60R
(2) 2 Roller
Shorthorns
Roller
Set #1
(2) 2 Roller 6074.00 6074.00 Yellow
Longhorns
4
4003.036
3"x2"x28"
(2) 2 Roller 6074.01 6074.01 Blue
Steel Lnghrns
5002.04L
4
5002.04R
(2) 2 Roller
Sliders
5002.16L
6
5002.16R
(1) 2 Roller
Sliders
(1) 4 Roller
4003.026
3"x2"x.032"x32"
8
5002.07
(2) 4 Roller
I-beams
Yellow, LH
6072.20
Yellow, RH
6072.19 Yellow, LH
6071.07
6072.20 Yellow, RH
6071.07
Yellow
5002.63L
6074.01 6074.01
5002.63R
5002.61L
8-
Hull
Support
4003.056
3"x2"x35.5"
5002.61R
5 STARR,
Value Line,
6074.01 (3 sets) Blue
steel longhorns
5002.62L
6074.01 (4 sets)
5002.62R
5002.09
38
4118.026 3"x2"x .120"x35.5"
8
(2) 4 Roller
I-beams
WWW.LOADRITE.COM
6071.07
Yellow
ORDERS@LOADRITE.COM
Roller Pivot Bar Assemblies
Part #
Pivot Bar
Pivot Bar Size
Roller
Quantity
5002.05L
4
5002.05R
(2) 2 Roller
Sliders
4003.016 3"x2"x.095"x38.75"
6
5002.06R
(1) 2 Roller
Sliders
(1) 4 Roller
4241.016
3"x2"x3/16"x47"
4002.486
3"x2"x.25"x48"
4001.016
4"x3"x.125"x54"
5002.17L
Yellow, LH
Yellow, RH
5002.17R
Yellow
Yellow, LH
6071.07
Yellow, RH
16
Yellow
(4) I-beam
Sets
24
Notes
6072.20
(2) 4 Roller
I-beams
5002.06L
5002.10
Roller
Set #2
8
5002.08
5002.12
Roller
Set #1
6070.123 (3
sets)
Yellow, LH
(3) 8 Roller
Truck Sets 6070.124 (3 sets) Yellow, RH
8
(2) 4 Roller
I-beams
6071.08
Yellow
8-
REQUIRE COMMON
CARRIER SHIPPING
Hull
Support
SOME ITEMS
39
CALL 800-942-2324
FAX 800-577-8832
Roller Assembly Components
A
C
B
E
D
F
Part #
1002.00
1002.01
1002.02
1002.51
1002.61
1012.00
1012.01
2010.01A
2010.02A
2021.01
2021.02
2022.02A
2022.03A
2024.01A
2067.00A
2069.00A
3305.10
2023.01A
G
H
Description
Notes
Picture
1-1/8" ID, for yellow TPR
1.00" ID, "7P"
1.12" ID x 1.50", for black
Roller
Logo, LR, white, w/ hole
bushing
L
5 Starr, black, w/ hole
5/8" ID
Value Line
.25"x.75"x2.8125", Slider
U-bolt plate
.25"x1.00"x2.8125", I-beam
K
Bearing pad, 1.69" long
concave 2.88" long
1.50", 2 holes, I-beam, Slider
C
1.78”, 4 holes, Value Line
Roller
1.00", I-beam to U-bar
assembly
2.68", 8 roller Truck
pivot
1.25", Short- and Longhorns
2.82"
I-beam
16"
D
Shorthorn
Shorthorn, yellow TPR
Slider
Longhorn
Longhorn, yellow TPR
Longhorn, Value Line
I-beam U-bar
I-beam U-bar, yellow TPR
E
4029.01A
4029.02A
4030.01A
4031.00A
4031.01A
4031.036
4032.00A
4032.01A
Bar
extrusion
4061.006
Extension
Truck
2045.01
2045.02
2045.04
2045.11
2045.13
Pivot bar
spacer
2.25", galvanized pipe
3.18", galvanized pipe
.87", galvanized pipe
.640" ID x 2.63"
1/2" ID x 2.69", galv. Steel
2046.01
8 Roller
.75"x1.31" galvanized pipe
F
G
H
J
8-
Hull
Support
K
2505.06
2505.14
2505.906
2509.00
2509.02
1466.02
1466.03
4026.12KIT
L
6118.006
40
6077.01
J
1-1/8" ID, Std. LR
Washer
1-1/2" OD x 13/16" ID
2-1/4" OD x 1-3/8" ID
Use w/ std. LR
Hog ring
Use w/ logo bushings
Retainer 5/8" track roller
Kits
1-1/8" roller
Upgrade Kit Black rubber to TPR, each
6077.01PS
6077.60
WWW.LOADRITE.COM
6077.62
A
A
A
A
A
A
B
ORDERS@LOADRITE.COM
Keel Roller Assemblies
10"
8"
7.75"
5"
Material Roller
Black
1008.01
Poly
1008.13
End Caps Bracket Shaft(s)
1008.05
1008.19
6077.42PS Poly
1008.13
6077.01S
6077.01PS
6077.50S
6077.50PS
6077.51S
6077.51PS
6077.60S
6077.60P
6077.61S
6077.61P
6077.45PS
6077.11S
6077.11PS
6077.16S
6077.16PS
6077.24P
6077.62S
6077.62PS
6077.63PS
6118.006
6118.016
6077.03S
6077.03PS
6077.04S
6077.04PS
6077.39PS
6077.07S
6077.06S
6077.06PS
Black
Poly
Black
Poly
Black
Poly
Black
Poly
Black
Poly
Poly
Black
Poly
Black
Poly
Poly
Black
Poly
Poly
Black
Poly
Black
Poly
Black
Poly
Poly
Black
Black
Poly
1008.01
1008.05
1008.13
1008.19
1008.01
1008.05
1008.13
1008.19
1008.01
1008.05
1008.13
1008.19
1008.01 (3) 1008.05
1008.13 (3) 1008.19
1008.01 (2) 1008.05
1008.13 (2) 1008.19
1008.13
1008.19
1008.01 (2) 1008.05
1008.13 (2) 1008.19
1008.01 (2) 1008.05
1008.13 (2) 1008.19
1008.13 (2) 1008.19
1008.01 (3) 1008.05
1008.13 (3) 1008.19
1008.13 (5) 1008.19
1008.01 (2) 1008.05
1008.13 (3) 1008.19
1008.03
1008.05
1008.06
1008.19
1008.03
1008.05
1008.06
1008.19
1008.06
1008.19
1008.07
1008.05
1008.07
1008.05
1008.12
1008.19
6077.05S
Black
1008.07
1008.05
6077.40S
6077.41
6077.41PS
6077.02S
Black
Black
Poly
Black
1008.07
1008.07
1008.12
1008.07
1008.05
1008.05
1008.19
1008.05
6077.70P
Black
1008.12
1008.19
6077.02S
6077.64S
6077.65S
Black
1008.02
6070.05
Black
1008.00
Nuts
Notes
Incl. u-bolts for 2" x-bar
Incl. u-bolts for 2" x-bar,
brake line mount
1008.19
Incl. u-bolts for 3" x-bar
1026.026
Incl. 3-bar light bracket
Incl. 3-bar light bracket
and u-bolts for 3" x-bar
Pivot assy., 3 rollers, ubolts for 3" x-bar
1059.09 2504.62 Pivot assy., 2 rollers, ubolts for 3" x-bar
Incl. 1/2" x 4" HHB
Double roller, 3" x-bar
4070.096
Double roller, selfadjusting
Double roller, front
Pivot assy., 3 rollers, ubolts for 3" x-bar
As above, 5 rollers
Self adjusting with
1227.006 (2) brackets
1063.006
Without u-bolts
1026.046 1059.10 2504.62
Incl. u-bolts for 3" x-bar
8-
12"
Part #
6077.00
6077.00P
Hull
Support
Size
Incl. u-bolts for 3" x-bar
Incl. u-bolts for 2" x-bar
Incl. u-bolts for 2" x-bar.
High.
1026.056
1059.11 2504.62
4 bolts
1141.516
Steady rest bow
1026.056 1071.01 2504.50 Incl. u-bolts
Front and rear
n/a
1026.016 2502.70 2504.03 No end caps or u-bolts.
41
CALL 800-942-2324
FAX 800-577-8832
Galvanized Keel Roller Brackets
Part # Size
Notes
Picture
1026.016 5"
A
1026.026 12"
Panel bracket
1026.046 10"
1026.056 8"
4070.096
45 deg. Chamfers
1063.006 - - Self adjusting keel, accepts 12" roller
B
1081.026 - - Steady rest
1010.00G
3 bar light adaptor
C
A
B
C
8-
Hull
Support
Bumper Strips
Part # Material
Size
Picture
1261.17 Poly
3” x 11.75”
A
1261.10 Black PVC 10" x 1-1/16" x 1-1/16"
B
1261.11 Black PVC 1.1" x 1.1" x 3"
C
A
C
42
B
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
8-
Part # Dimension Length
Lumber
1149.09
24" Treated
1060.99
Non-treated
84"
1187.08
Treated
1060.93
Non-treated
96"
1060.28
Treated
2" x 4"
1060.37
108" Treated
1060.95
Non-treated
120"
1060.31
Treated
1060.94
Non-treated
144"
1060.29
Treated
1646.09
18" Treated
1646.05
26" Treated
1646.01
36" Treated
1646.02
42" Treated
1646.03
52" Treated
1060.14
60" Treated
1646.04
64" Treated
1646.07
72" Treated
1065.15
Treated, stiffener
84"
1060.43
Treated
1060.97
Non-Treated
1060.40
96" Treated
1065.13
Treated, stiffener
2" x 6"
1060.34
Treated
108"
1065.14
Treated, stiffener
1060.98
Non-Treated
1060.41
120" Treated
1065.12
Treated, stiffener
1060.44
132" Treated
1060.32
Non-Treated
1060.96
144" Treated
1065.10
Treated, stiffener
1060.69
162" Treated
1065.11
166" Treated, stiffener
1060.33
174" Treated
1060.77
186" Treated
1060.50
2" x 8"
144" Treated
1060.53
4" x 4"
96" Treated
1060.01
96" Treated
1060.02
4" x 6"
116" Treated
1060.03
134" Treated
1060.52C
Treated
144"
1060.04
Treated
4" x 8"
1060.55C
200" Treated
Hull
Support
Carpeted Bunks
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
43
CALL 800-942-2324
FAX 800-577-8832
Plastic Covered Bunks
8-
Hull
Support
44
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
Part #
Dimension Length
Lumber
1060.99PLH
Non-treated
1060.99PRH
Non-treated
84"
1187.08PLH
Treated
1187.08PRH
Treated
1060.93PLH
Non-treated
1060.93PRH
Non-treated
96"
2" x 4"
1060.28PLH
Treated
1060.28PRH
Treated
1060.95PLH
Non-treated
120"
1060.95PRH
Non-treated
1060.94PLH
Non-treated
144"
1060.94PRH
Non-treated
1646.05PLH
Treated
26"
1646.05PRH
Treated
1646.01PLH
Treated
36"
1646.01PRH
Treated
1646.02PLH
Treated
42"
1646.02PRH
Treated
1646.03PLH
Treated
52"
1646.03PRH
Treated
1060.14PLH
Treated
60"
1060.14PRH
Treated
1646.04PLH
Treated
64"
1646.04PRH
Treated
1646.07PLH
Treated
72"
1646.07PRH
Treated
2" x 6"
1060.43PLH
Treated
84"
1060.43PRH
Treated
1060.40PLH
Treated
96"
1060.40PRH
Treated
1060.34PLH
Treated
108"
1060.34PRH
Treated
1060.98PLH
Non-treated
1060.98PRH
Non-treated
120"
1060.41PLH
Treated
1060.41PRH
Treated
1060.44PLH
Treated
132"
1060.44PRH
Treated
1060.96PLH
Non-treated
144"
1060.96PRH
Non-treated
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Bunk Carpet
Hull
Support
8-
Available bulk roll
or cut lengths
Part #
Roll Size
1014.30 7" x 150'
1014.10 9" x 150'
1014.20 12" x 150'
1014.50 15" x 150'
1014.24 24” x 150’
Plastic Bunk Covers
Part #
1008.37L
1008.37R
1008.41
1008.42
1008.43
Size
Location
2"x4" x 4’
LH
2"x4" x 4’
RH
2"x6" x 1’
Round
2"x6" x 2’
end
2”x6” x 3’
Center
Notes
Silver
PVC
45
CALL 800-942-2324
FAX 800-577-8832
Bunk Brackets - Bolster, Billy, and Swivel
Part #
1027.016
1027.026
1027.036
2179.006
A 1029.026
1029.006
1029.036
1029.016
1029.046
1029.056
1027.716
M 1027.726
1027.536
1027.546
4157.516
1017.006
1017.01
2494.016
B 1622.016
1622.026
2330.006
Material
3/16"
Type Length Width
Slot / Holes
8"
10" 2-7/16" 5-7/8" x 15/32"
12"
8.75"
2" 5.25" x .5"
10.5"
Bolster
13.5"
18"
3.5" 10" x 9/16"
24"
30"
36"
10 Ga.
10.93"
3.43" 7/16" (4) Holes
12"
3.81" 9/16" (4) Holes
Notes
Flat bunk, light duty
3/8" Pontoon 11.44"
3/16"
1.88"
11 Ga. Swivel 1.91"
1/4"
4.5"
Posi
Lock
1/4"
3"
6.25"
3.5"
1"
1.31"
3.19"
2.5"
3.5"
5"
F
D
C
E
Universal, vertical bunk
M
Flat bunk, heavy duty
Left, 3/8" u-bolts
Right, 3/8" u-bolts
Left, 1/2" u-bolts
Right, 1/2" u-bolts
Gull wing shape
Billy
7 Ga.
Picture
G
F
7/16" (2), 9/16" (1)
Use w/ bolster bracket
7/16" (3)
7/16" (2), 9/16" (1) Tiger Cat
Channel, fits 2" x-bar
7/16"
Channel, fits 3" x-bar
9/16" (9)
Plate, large
G
L
C
E
D
K
8-
Hull
Support
J
H
SA Pivot Bar Assemblies
Carpeted
Part #
5002.53
5002.54
5002.56
5002.55
5002.57
5002.50
5002.59
5002.58
46
Plastic
P.B. /
Type
Tube Dimension
Bunk Bunk Size
Notes
Part # **
Tube #
5002.53P
4004.016 2" x 2" x .083" x 32"
1646.01 2" x 6" x 36"
5002.54P
5002.56P
4118.016 3" x 2" x .120" x37.75"
1646.02 2" x 6" x 42"
5002.55P Pivot 4003.016 3" x 2" x .095" x 38.75"
SA models
5002.57P Bar 4003.036 3" x 2" x .120" x48"
1646.03 2" x 6" x 52"
5002.50P
4002.486 3" x 2" x .25x48"
1646.03 2" x 6" x 52"
5002.59P
1111.046 3" x 2" x 66"
1646.07 2" x 6" x 72"
5002.58P
4001.026 4" x 3" x 1/8" x 60"
1646.04 2" x 6" x 64"
** Part numbers require LH or RH suffix (left or right side of trailer)
WWW.LOADRITE.COM
L
B
A
H
J
K
ORDERS@LOADRITE.COM
Pivot Bar Brackets
Part #
2072.06A
2072.03A
2072.04A
1615.016
4041.016
4000.016
4070.096
4070.126
4070.146
4070.036
4070.046
4070.056
4070.066
4070.076
4071.006
Material Height Holes
2.82" 5/8"
Aluminum 3.82" 5/8"
4.57" 5/8"
.437" (2)
10"
1/4" Steel
.406" (5)
4.75"
2.88"
4.81”
4.81"
9.5"
11/16"
3/8" Steel 12.5"
15.5"
18.5"
22.5"
6.38" 9/16"
Notes
Picture
A
A
Roller mount, lite
B
.206” stock
.313” stock
B
C
C
Double pivot bar (2)
D
SOME ITEMS
Part #
Tube Length Wall
Notes
4004.016
32"
.083"
2" x 2"
4068.006
31.75" .188" Welded pivot stop
4003.046
28"
Value Line
.083"
4003.026
32"
4003.056
Value Line
35.5" .105"
4118.026
4003.016 3" x 2" 38.75" .095"
4241.016
47"
3/16"
4003.066
Value Line
4003.036
.120"
48"
4002.486
.25"
4001.036
44"
.125"
4001.026 4" x 3"
Top holes
60"
4069.016
3/16" Side mount
Picture
B
8-
Pivot Bars
Hull
Support
REQUIRE COMMON
CARRIER SHIPPING
A
C
B
C
47
CALL 800-942-2324
FAX 800-577-8832
Side Guide Sets
B
C
Part #
G2
G3
G6
G8
G4
G6A
G10
G11
G12
G13S
G7A
G7B
G7C
G200AS
G993X3
G994X3
G995X3
G996X3
G999
Type
Carpeted
Carpeted
Carpeted
Dimension Length
2" x 4"
60"
2" x 4"
60"
2" x 6"
96"
2" x 4"
PVC
1-1/2" OD
Carpeted
2" x 4"
PVC
2-1/2" OD
Notes
2" x 3" frames
3" x 3" frames
4" x 3" frames
Picture
A
4" x 3" frames, HD
5" x 3" frames, HD
4" x 3" frames, skiff models
18.5" 3" x 2" frames, skiff models
3" x 3" frames, skiff models
Catamaran inner set
Pontoon inner, vertical, set of 4
18"
Pontoon inner, vertical, set of 2
84" Pontoon inner, carpeted boards
Alum. Models w/ torsion axles
3" x 3" frames
60" 4" x 3" frames
5" x 3" frames
6" x 3" frames
48" Universal, boxed
C
B
D
E
A
D
E
8-
Hull
Support
Bow Steady Rests
G
Part #
1115.00S
6077.70
1115.02S
1115.04S
2241.115
2241.114
6077.99
Type Dim. Length Application
Notes
Picture
5"
Li'l Rider
12" steady rest bracket
F
Roller
8”
Heavy duty 5/16” x 2.5” x 20.63” bkt.
G
18"
H
Skiff
12" bolsters, steady rest
20"
Bunk
24" 4" x 3" frames
Tongue board
36"
PVC
AB, AC
Satellite
J
F
J
48
WWW.LOADRITE.COM
H
ORDERS@LOADRITE.COM
Snowmobile Parts
Picture
H
K
A
J
F
C
K
F
A
E
G
D
G
9-
Description
Hold down bar
Vinyl bar end
Ramp for non-tilt trailers
Pin, snap, 3/8" x 1-1/2"
Pin, snap, 3/8" x 2-3/4"
Plug, 7 pin, trailer end
Cable, 7 conductor
Wire, 2 conductor 14 ga., jacketed
Oval stoplight, grommet and plug, snomo
Aluminum cap, 99.88", rear of plywood deck
Basket nut clinched assembly
T-handle, w/ plated stud
Tilt latch handle
Hold down handle, iron
Hold down assembly w/ handle and knob
Black twist knob
Retainer, "E" shape
Tie down bracket, rear
Tie down bracket, front
Screw, 1/4" x 14 x 1-5/8"
Screw, square drive, #14 x 1.5", stainless
Screws, stainless, for 3399.43, 24 required
Plastic vent
Door prop bracket
Interior light, 12V
Salt shield, 3 piece
Salt shield, 4 piece
Door pull handle, black
Door gas prop, aluminum end
Gas spring, 150 lb., black end
Gas spring, 35 lb.
Tilt assist kit
D
Snow
Part #
1298.526
1675.01
1305.10RA
1349.01
1349.03
1352.00
1354.00
1355.00
7053.01
1715.83A
1748.02G
1838.07
1838.01E
1838.08
1838.09
1838.13
1838.14A
2052.02E
2052.136
2511.11
2511.48
1270.00S
3399.44
5006.15
6259.01
6259.40
6259.41
6259.44
6259.65
6259.80
6259.82
6259.73
J
C
49
CALL 800-942-2324
FAX 800-577-8832
E
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
H
9-
Snow
ls!
e
ilt Mod
T
use on
OT for
N
C
50
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Pontoon Accessories
Part #
1828.17
1828.06
1828.16
G7A
G7B
6081.56
Description
Picture
Steps and u-bolts
Grab rail only
Steps with handrail
Inner side guides (4), vert. PVC
Inner side guides (2), vert. PVC
C
Tongue jack (standard w/ brakes)
B
B
C
Mast Support Kit
Part #
Description
1119.116
Mast support kit
1119.126
1119.006
Mast support
1119.016
Dimensions
Notes
2" x 2" x 60" 2" x 3 or 3" x 3" tongues or frames,
2" x 2" x 63" includes plate and u-bolts
2" x 2" x 60"
Weldment only
2" x 2" x 63"
1119.006
Motorcycle Accessories
Dimensions
Notes
8" x
Utility models
8" x 57"
Mounting slot
2" x 4"
Universal
Picture
B
A
C
C
Options
Description
Chock
Ramp
Tie down
10 -
Part #
1812.356
1565.52G
2052.016
A
B
51
CALL 800-942-2324
FAX 800-577-8832
Utility and ATV Accessories
Part #
Models Description
Notes
1813.48
UL48, 3 sides
1813.410
Aluminum UL410, 3 sides
Rail Sidekit UL510, 3 sides
1813.510
1813.58
UL58, 3 sides
1812.ULT1
Tie downs Use with aluminum rail sidekits
4229.80
UL 4' wide
Ramp
4229.90
UL 5' wide
1812.ATV1 Standard
Tie downs only
1812.ATV2
Conversion Tie downs and ramps
kit
1812.MOT
Chock and ramp
1812.SNO
Basket clinch nut and 6259.72
1812.356
Motorcycle chock only
6259.72
Snowmobile hold down set
Kit
component Winchstand assembly
6198.296
2052.016
Tie down angle bracket
1813.59
Aluminum U510, 3 sides
Rail Sidekit U612, 3 sides
1813.60
Heavy
4229.566
U510, 5' tall
Duty
4229.4612
U612, 4' tall
Ramp
4229.5612
U612, 5' tall
1841.526
Fence
Weldment, 2 unit
ATV
1842.28
Ramp
Aluminum, 53.88"
B
D
Picture
B
E
C
A
B
C
D
C
A
B
Option shown installed on trailer.
E
10 -
Options
H
Miscellaneous Accessories
G
F
J
52
Part #
Notes
Picture
2052.016 Tie down angle bracket
F
3091.01 Non-skid tape, 2" wide roll
1543.01 Spray Cold Galvanizing compound
G
1006.05 Shell Alvania® wheel bearing grease, tube
H
6081
Tongue scale
J
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
Boat and Trailer Dollies
Part # Capacity
Description
Picture
2390.008 3000# Showroom boat dolly
A
2390.019 1000# Showroom PWC dolly
B
1644.01
Replacement caster, boat dolly
750#
1644.02
Replacement caster, boat dolly, locking
6242.01
Standard duty trailer dolly, solid wheels
6242.02
Heavy duty trailer dolly, pneumatic wheels
A
B
SOME ITEMS
REQUIRE COMMON
CARRIER SHIPPING
Jacks
Part #
6081.15
6081.56
6081.06F
Rating
Notes
800#
Swivel
1000#
1200# Footed
Picture
D
E
F
E
C
D
10 -
Part #
Notes
1394.01 6" frame swivel adapter hardware
1219.006 Strap, .25 x 1" x 7.5"
1394.01
Options
Jack Replacement Parts
Hitch Accessories
Part # Description
Notes
Picture
1468.04 Retainer Clip Cl II
1483.00
Fulton #HL
F
Lock
UTL100
Universal
G
F
G
53
CALL 800-942-2324
FAX 800-577-8832
Stainless U-Bolts
H
W
T
Part # Thread
2049.60S
3/8"
2049.63S
2510.40S
2049.25S
2049.26S
2049.27S
2049.12S
1/2"
2510.42S
2049.76S
2049.14S
2049.80S
Width Length
1.53"
3.12"
1.56" 2.375"
2.03"
4.25"
4.5"
5.25"
3.03"
6.25"
7.25"
8"
4.25"
4.03"
8.75"
10.5"
Round Plated U-Bolts
Part #
2510.41
2510.03
2510.48
Thread
1/2"
Width
2.44"
3.12"
Length
3.75"
5.50"
6.50"
Aluminum
U-Bolt Pads
Part #
2474.07
2474.01
2474.03
2474.06
11 -
Hardware
54
Size
1.69”
2.62"
2.92"
3.62"
U-Bolt Plates
Part #
2010.02A
2010.01A
Size
1" wide
3/4" wide
Square Plated U-Bolts
Part #
2049.78
2049.02
2049.60
2049.03
2049.63
2049.08
2049.75
2049.05
2049.09
2049.11
2049.74
2049.06
2049.10
2049.07
2510.01
2510.43
2510.45
2049.73
2049.21
2049.22
2049.23
2049.81
2510.40
2049.50
2510.04
2510.05
2510.08
2049.59
2049.68
2049.24
2049.25
2049.26
2049.27
2049.12
2510.42
2049.66
2049.67
2049.79
2049.13
2049.53
2049.76
2049.14
2049.80
2510.47
2510.46
WWW.LOADRITE.COM
Thread
5/16"
Width
.78”
1.31"
1.53"
1.56"
2.03"
3/8"
3.03"
4.06"
5.125"
2.03"
1.78"
2.03"
2.56"
1/2"
3.03"
3.06"
3.31"
3.34"
3.38"
4.03"
5.06"
5.50"
Length
1.56”
2.75"
3.125"
2.13"
2.375"
4.00"
3.00"
3.75"
4.25"
5.75"
2.75"
3.25"
3.75"
4.25
5.00"
4.00"
3.75"
3.25"
3.50"
4.50"
5.50"
6.50"
4.25"
4.75"
5.25"
6.75"
6.25"
7.25"
3.56"
3.25"
4.50"
5.25"
6.25"
7.25"
8.00"
8.75"
10.75"
4.00"
8.00"
5.50"
4.25"
8.75"
10.5"
4.25"
4.00"
ORDERS@LOADRITE.COM
Standard Hex Head Bolts
Length
1"
1-1/8"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
2-3/4"
3"
3-1/4"
3-1/2"
4"
4-1/2"
5"
5-1/2"
6"
6-1/2"
7"
7-1/2"
8"
8-1/2"
9"
9-1/2"
5/16"
3/8"
7/16"
2501.10 2506.10
1/2"
9/16"
2501.12 2506.12 2502.12
2508.15 2501.15 2506.15 2502.15
2508.17
2502.17
2501.20
2508.22 2501.22
2502.25
2508.25 2501.25
2501.28
2501.30
2502.30
2502.32
2508.35 2501.35
2502.35
2501.40
2502.40
2501.45
2502.45 2509.45
2501.50
2502.50
2502.55
2501.60
2502.60
2502.65
2502.70
2502.75
5/8"
2503.15
2503.20
Thread
Diameter
2503.40
2503.45
2503.50
2503.55
2503.70
2503.75
Shank
Length
2502.85
2503.90
2502.95
Hardware
11 -
Stainless Hex Head Bolts
Length
5/16"
3/8"
1/2"
5/8"
2501.10S
1"
2501.12S 2502.12S
1-1/4"
2502.15S 2503.15S
1-1/2"
2502.17S
1-3/4"
2502.20S
2"
2501.22S 2502.25S
2-1/4"
2502.26S
2-1/2"
3-1/2" 2508.35S
2502.40S 2503.40S
4"
2502.45S 2503.45S
4-1/2"
2502.50S 2503.50S
5"
55
CALL 800-942-2324
FAX 800-577-8832
Nuts and Washers
Size
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
2505.10
3/4"
1-1/8" 2505.06
1-3/8" 2505.906
2504.03
2504.50
2504.02
Washers
Flat
Lock
Std.
1028.03 2505.01
2505.08 2505.09
2505.02
2505.17 2504.15
Nuts
Ny-lock Half Lock
2504.12
2504.08 2504.07
2504.02 2504.40
2504.04
2504.03 2504.50
2504.16
2504.09 2504.62
2504.18
2504.12
Stainless Nuts, Galvanized and Stainless Washers
Stainless Washers
Size
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
Flat
Lock
Galv. Washers
Flat
Nuts
Lock
Std.
Ny-lock
Galv
Ny-lock
2505.01S
2504.01S 2504.12S
2505.09S
2504.21S
2505.51S 2505.21S 2505.516 2505.216 2504.22S 2504.02S
2505.53S 2505.31S 2505.536 2505.316 2504.23S 2504.03S
2505.686
2505.54S 2505.41S 2505.546
2504.24S 2504.09S
Special Nuts and Washers
Part #
11 -
Hardware
1003.01
56
Size
Notes
1003.01
Lug
1/2"-20
Wheel attachment
1003.03C
Lug
1/2"-20
Aluminum wheel
2504.90
1003.03C
Type
Std. Nut #10
4265.18
Lock
10 MM
2505.14
Flat
13/16" x 1-1/2" Zinc plated
WWW.LOADRITE.COM
Metric
ORDERS@LOADRITE.COM
Special Bolts
Part #
Type
Size
Notes
1003.02
Lug
1/2"-20
Wheel attachment
2509.33E Shackle 9/16" x 3-1/2" Leaf spring shackle
2506.00
J-bolt 3/8" x 4-5/8"
7058.14
1/2" x 1"
7058.16
1/2" x 1-1/2"
7058.16S
1/2" x 1-1/2" Stainless
7058.10
3/8" x 1-3/4"
7058.11 Carriage 1/2" x 3/4"
7058.02
1/2" x 4"
7058.45
1/2" x 4-1/2"
7058.45S
1/2" x 4-1/2" Stainless
7058.55
1/2" x 5-1/2"
2503.66
HHB 3/4" x 5"
Grade 8
1003.02
2506.00
Screws
Notes
2511.11
1028.06
11 -
Self drilling
Self drilling
Self tapping
SDSF Utility
Round head
Round head
Self drilling, stainless
Phillips head
Pan phillips, stainless
Self drilling
Square drive, galv.
Self tapping
Hardware
Part #
Type
Size
1028.06
1/4" x 1-1/4"
Lag
1028.02
5/16" x 1-1/2"
2511.33
1/4" x 3/4"
2511.14
1/4" x 1-1/2"
Torx
2511.20
1/4" x 1-9/16"
2511.19
1/4" x 2-1/2"
2511.31
1/4" x 5/8"
Machine
2505.57
1/4" x 2-3/4"
2511.16
#8 x 1/2"
2511.28
#8 x 3/4"
2511.21
#10 x 5/8"
1270.00
#10 x 3/4"
1028.05
#10 x 3"
2511.23
#14 x 3/4"
57
CALL 800-942-2324
FAX 800-577-8832
Pins
Part #
1170.09
1170.07
1170.14
1664.51E
1664.006
1349.02
1349.01
1349.03
1216.00
1216.01
2354.01
2354.02
2354.03
2354.00
1349.01
1216.01
Type
Size
Notes
1/8" x 2-1/4"
Cotter 5/32" x 2-1/4"
1/4" x 2-1/4" Zinc
3/4" x 7-5/8" Ramp pivot, 5' utility
Ramp, 16' galv
1/4" x 1-1/2" Coupler lock pin
3/8" x 1-1/2"
Snap pin
3/8" x 2-3/4"
w/ chain, KD
Lynch
1/4" x 1-3/4"
1/2" x 4-3/4" WVUT
1/2" x 5-3/4" WV
Hitch
3/4" x 4-3/4" CDUT
5/8" x 4-3/4" BWSNUT
Chain and Accessories
Part #
1051.02
1051.03
1052.02
1052.01
Type
SHook
Size
Notes Picture
13/32" Medium
7/16" Large
Quick 1/2"
Link
3/8"
Hitch Accessories
B
Part # Description Notes
Picture
1468.02 Retainer Cl III
Clip
1468.04
Cl II
1483.00
Fulton #HL
B
Lock
UTL100
Universal
A
A
11 -
Hardware
58
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
BRAKE LAWS BY STATE
Appendix
12 -
INSURANCE
TWO TRAILERS
TIEDOWNS
BREAKAWAY
BRAKES
FLARES
X
X
X
X
X
X
X NO N/A
X
X
X
X
X
X
X NO YES
X
X
X
X
X
X
X YES YES
X
X
X
X
X
X
X YES YES
X
X
X
X
X
X
X NO YES
X
X
X
X N/A X
X YES YES
N/A X
X
X
X
X
X NO YES
X
X
X
X
X N/A N/A NO YES
X
X
X
X N/A X
X NO YES
X
X
X
X
X
X N/A NO N/A
X
X
X
X N/A X N/A NO NO
X
X
X
X
X
X
X YES YES
X
X
X
X
X
X
X NO YES
X
X
X
X N/A X
X YES YES
X
X
X
X N/A X
X YES NO
X
X
X
X
X N/A X YES YES
X
X N/A X N/A N/A N/A YES NO
X
X
X
X N/A X
X YES YES
X
X
X
X
X N/A X NO YES
X
X
X
X N/A X
X YES YES
X
X
X N/A X N/A X NO YES
X
X
X
X N/A N/A N/A YES YES
X
X
X
X
X
X
X NO YES
X
X
X
X
X
X N/A YES N/A
N/A X
X
X N/A X
X YES YES
X
X
X
X N/A X N/A YES YES
X N/A X
X
X
X
X YES YES
X
X
X
X
X
X
X YES YES
N/A X N/A X
X N/A N/A NO N/A
N/A X
X
X N/A X N/A NO NO
X
X
X
X
X
X
X NO YES
X
X
X
X N/A N/A X NO N/A
X
X
X
X N/A N/A N/A NO NO
X
X
X
X N/A N/A X YES NO
X
X
X
X N/A X N/A YES N/A
X
X
X
X N/A X
X YES N/A
X
X
X
X N/A N/A X NO NO
X
X
X
X N/A X
X NO YES
X
X
X
X N/A X N/A NO N/A
X
X
X
X N/A X N/A NO NO
X
X
X
X
X
X N/A YES YES
X N/A X
X
X
X N/A YES YES
X
X
X
X
X
X
X NO YES
X
X
X
X N/A X
X YES N/A
X
X
X
X
X
X
X NO YES
X
X
X
X
X
X
X NO YES
X
X
X
X
X
X
X NO YES
X
X
X
X
X
X
X NO NO
X
X
X
X N/A X
X YES NO
X
X
X
X N/A X N/A YES YES
REFLEC-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
TURN
SIGNALS
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X N/A
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
N/A X
LICENSE
LIGHT
3000
3000
3000
3000
1500
3000
3000
4000
3000
2500
3000
1500
3000
3000
3000
N/A
N/A
3000
3000
3000
N/A
3000
3000
2000
N/A
3000
3000
1500
3000
3000
3000
3000
4000
ALL
2000
3000
N/A
3000
4000
3000
3000
3000
4500
2000
3000
3000
3000
3000
3000
N/A
CLEARANCE
LIGHTS
60
65
65
65
65
70
60
60
60
55
65
65
60
60
60
65
55
70
65
55
N/A
60'
65'
N/A
60'
75'
65'
70'
48'
50'
65'
60'
60'
75'
65'
65'
65'
60'
60'
N/A
70'
65'
65'
65'
65'
60'
75'
65'
65'
85'
TAILLIGHTS
13'6"
13'6"
13'6"
13'6"
14'
13'
13'6"
13'6"
13'6"
13'6"
13'6"
14'
13'6"
13'6"
13'6"
14'
13'6"
13'6"
13'6"
13'6"
13'6"
13'6"
13'6"
13'6"
14'
13'6"
14'6"
14"
13'6"
13'6"
14'
13'6"
13'6"
14'
13'6"
13'6"
14'
13'6"
13'6"
13'6"
14'
13'6"
13'6"
14'
13'6"
13'6"
14'
13'6"
13'6"
14'
STOP LIGHTS
MAX. LENGTH
WITH
TRAILER(S)
8'
8'
8'
8'
8'6"
8'6"
8'6"
8'6"
8'6"
8'
9'
8'6"
8'
8'6"
8'6"
8'6"
8'
8'
8'6"
8'
8'6"
8'
8'6"
8'6"
8'
8'6"
8'6"
8'6"
8'
8'
8'
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'6"
8'
8'6"
8'6"
TRAILER EQUIPMENT REQUIREMENTS
SAFETY
CHAINS
HEIGHT
N/A
40'
40'
N/A
40'
35'
45'
40'
48'
N/A
40'
45'
42'
40'
48'
N/A
N/A
30'
45'
N/A
33'
45'
48'
50'
N/A
N/A
40'
N/A
48'
35'
40'
45'
48'
60'
40'
N/A
35'
53'
48.6'
48'
53'
48'
N/A
48'
53'
N/A
48'
40'
45'
60'
MIN. WEIGHT
REQUIRING SEPARATE TRAILER
WIDTH
MAX. SPEED LIMIT
55
55
75
60
55
75
55
55
70
55
55
75
65
65
65
70
65
55
45
65
55
55
65
65
65
N/A
75
75
45
55
75
65
55
65
65
65
65
55
65
55
75
65
55
65
65
55
60
65
65
75
LENGTH
STATE
AL
AK
AZ
AR
CA
CO
CT
DE
FL
GA
HI
ID
IL
IN
IA
KS
KY
LA
ME
MD
MA
MI
MN
MS
MO
MT
NE
NV
NH
NJ
NM
NY
NC
ND
OH
OK
OR
PA
RI
SC
SD
TN
TX
UT
VT
VA
WA
WV
WI
WY
MAX. DIMENSIONS
TRAILER ONLY
59
CALL 800-942-2324
FAX 800-577-8832
FREQUENTLY ASKED QUESTIONS
TOW BALL HEIGHT
How high off the ground should the tow ball be with my tow vehicle at rest?
The ideal tow ball height should produce a ball centerline 18” to 21” from the
ground.
Centerline
Ideal
centerline
range
TIRES
How often should I check tires for proper inflation and wear patterns?
Tires should be checked before EACH trailer use! Using an accurate
pressure gauge, make sure reading matches maximum inflation
pressure printed on the tire sidewall. On longer trips, check at each
fuel stop. Before each trip check for overall tread depth and even wear
across the face of the tire, and for cracking due to dry-rot on the
sidewall and between tread ribs.
LUG NUTS
How often should I check the lug nuts for tightness?
Wheel lug nuts should be checked before EACH trailer
use!
Using a torque wrench, make sure lugs are
tightened to 85 – 95 pound feet of torque. On longer trips,
check at each fuel stop. Always criss-cross the wheel
and tighten in a star pattern.
BEARINGS
AND
GREASE
What kind of grease does Load Rite use in their trailer wheel bearings?
Load Rite and 5 STARR use Shell Alvania grease as factory-fill on all wheel bearings. It is a
lithium-complex based grease.
Do I have to use the exact same wheel bearing grease that Load Rite uses?
Not exactly. The brand name is unimportant. What is very important
is the type and quality of the grease you choose. Load Rite factory-fill
grease, Shell Alvania, is a multi-purpose lithium-complex based
product with an NLGI EP #2 rating. It is compatible with most any
lithium-complex based grease readily available on the market today.
When is the best time to check and add grease?
Generally, the hub is most prone to water infiltration when at operating
temperature (warm to the touch) and immersed in ambient water while
launching your boat. This will most likely occur during launch after an
over-the-road tow. The ambient water will quickly cool the grease
reservoir causing the hot grease to contract. Water infiltration by
siphon will ensue. Add grease to displace water on all BUT bearing
buddy equipped models. If towing long distance, monitor hub
condition at each rest or gasoline stop. Add grease as necessary.
What is the regularly scheduled maintenance interval for wheel bearings on a boat trailer?
Boat trailer wheel bearings should be regularly maintained as per the above recommendations
based on the particular system in question. Also, at the end of each season, each hub on a trailer
should be disassembled and examined for wear and contamination, regardless of trailer age.
12 -
Appendix
60
BRAKES
Do I need brakes on my trailer?
Load Rite and 5 STARR recommend brakes on all axles where available. However, laws vary by
state. Consult with your local DMV if you are unsure of the requirements of the state where your
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
FAQ’S, CONT’D.
trailer will be registered.
What are surge brakes?
Most hydraulic trailer brakes operate on the surge principle. The coupler assembly is known as an
actuator and contains a master cylinder similar to that in any automobile. When the brakes are
applied in the tow vehicle, the trailer “surges” against the tow ball forcing fluid through the trailer
hydraulic system.
How do I bleed my brakes?
Bleeding trailer brakes is the same in principle as bleeding brakes on a tow vehicle. Disconnect
the trailer from the tow vehicle and block the trailer. Make sure the master cylinder is full of fluid at
all times. Open the bleeder screw furthest from the actuator. Apply force to the actuator slide.
Hold. Tighten the bleeder screw. Release the actuator slide. Repeat as necessary until all air is
purged from the system. Proceed to the next furthest bleeder screw and repeat until the entire
trailer has been bled. Make sure to check the master cylinder fluid level often during the
operation.
In addition, if a new actuator is installed, it should be bench bled, or pre-bled, before attaching the
hydraulic line at the rear.
Visit www.loadrite.com for even more FAQ’s and detailed instructions.
12 -
What can I do to assure that my boat trailer is properly maintained?
Load Rite recommends regular maintenance during the boating season as follows:
Lights, wiring, coupler action, safety cables, winch cable, and lug nut torque should be checked
before each use.
Recommended lubricant, NLGI #2 EP lithium complex based high temperature wheel bearing
grease, should be applied via the grease fitting on the hub after each submersion in water of a
warm hub, or monthly, whichever comes first.
All fasteners should be checked for proper tension. All roller assemblies and winches should be
checked for free movement and lubricated as necessary.
Drum brakes should be adjusted. It is very important to adjust drum brakes "regularly". Given
varying amounts and types of use it is almost impossible to define "regularly" by a mileage or
elapsed time designation. Common sense and precaution are good rules of thumb in this
instance. Disc brakes require no adjustment.
Recommended annual maintenance is to include all of the above in addition to the following:
Annual maintenance should involve the disassembly, cleaning, inspection, and repacking of all
wheel bearings with the recommended lubricant, NLGI #2 EP lithium complex based high
temperature wheel bearing grease. It is recommended the inner seal and retaining hardware be
replaced any time the hub assembly is removed from the trailer.
All moving parts within the brake drum and sliding points on the brake caliper should be
inspected for wear and free movement, and lubricated as needed. Brake shoes or pads should
be inspected to assure they are clean, dry, free of any contaminants, and not worn below their
serviceable limit. Serviceable limit is commonly considered 3/32” from top of rivet to pad
surface.
Brake fluid should be thoroughly bled annually and replaced with fresh DOT 3 from a previously
unopened container.
All fasteners should be checked for proper tension. All roller assemblies and winches should be
checked for free movement and lubricated as necessary. Bunk boards should be checked for
internal integrity.
Frames and axles should be visually inspected for rust, damage, and fractures. Load Rite
recommends replacement of any structural member having been stressed beyond its range of
intended service.
Appendix
MAINTENANCE
61
CALL 800-942-2324
FAX 800-577-8832
WIRING DIAGRAM
1. White Wire - Ground
11
2. Side Marker Lights
3. Brown Wire
4. Yellow Wire
5. Green Wire
6. Clearance Lamps
7. Clearance Lamps
8. Side Marker Lights
9. I.D. Light Bar
10. Tail, Stop and Turn Lights
11. Disc Brake Solenoid
12 -
Appendix
62
Load Rite installs harnesses color-coded for conformity to SAE, NMMA, and TMA
standards. Tested to withstand a 9O-degree bend test at -20 degrees Fahrenheit without
cracking insulation, damaging the plug connectors, or suffering damage to the conductor.
Color-coding is:
White - ground
Brown - taillights, sidemarker lights, and clearance lights
Yellow - left turn and stop light
Green - right turn and stop light
Blue - disc-brake solenoid
WWW.LOADRITE.COM
ORDERS@LOADRITE.COM
INDEX
Parts
Axles
Leaf spring
Mounting kits
Torsion
Bearing Caps
8, 9
11, 12
9
15
15
14
Bow Steady Rests
48
Bowstop Assemblies
34
Brackets
Bunk
Crossbar hanger
Fender
Fender steps
Keel roller
License plate
Light
Pivot bar
Spring support
Tie down
Winch
Brake Drums
46
27
7
30
41, 42
28
30
47
10
51, 52
34
13
Disc
Drum
Electric
Flush
Hydraulic lines
29
20
21
21
21
Brake Rotors
13
Bumper Strips
45
Bunk Covering
Carpet
Plastic
42
44
Bunks
Carpeted
Plastic covered
Bearings
Individual
Kits
19
19
21
21
21
Brake Parts
17
18
59-62
Appendix
Disc
Drum
Electric
Flush
Hydraulic lines
42, 43
44, 45
Bushings
Roller
Spring
40
11
Cable Accessories
25
Caps, Winch Support
34
Chain Accessories
25
Couplers
24
Crossbars
26, 27
Drawbar
24
Dollies
53
Electrical
29
Fenders
6
Grease
52
Appendix
Actuators
Brake Kits
25, 58
25, 58
25
52
51
51
49, 50
52
33, 34
12 -
Accessories
Cable
Chain
Hitch
Miscellaneous
Motorcycle
Pontoon
Snowmobile
Utility
Winch
63
CALL 800-942-2324
FAX 800-577-8832
INDEX, CONT’D.
Hardware
54-58
Axle kits
11, 12
Hex head bolts
55
Nuts
56
Pins
58
Screws
57
Specialty bolts
56
Specialty nuts
57
Specialty washers
57
U-bolts
54
Washers
56
Roller Assembly Components
Brackets
Keel
Support
42
41
40
Safety Cable
25
Safety Chain
25
Seals
15
Side Guides
48
Snowmobile Parts
25, 53
Hitch Accessories
Hitch Balls
24
Hubs, Idler
13
Leaf Springs
10
License Plate Bracket
28
Spare Tire Carriers
Spindles
Retainers
Sleeve
Washers
Tongues
Angles
Junction plates
Skids
Swing kits
Lighting
Kits
Marker lights
Reflectors
Taillights
30
28
26
28
Mast Support
51
Motorcycle Accessories
51
Pivot Bar Assemblies
Bunk
Roller
46
38, 39
Pivot Bars
47
Pontoon Accessories
51
Rollers
12 -
Appendix
64
Keel
Spool
Support
Winch
35
35
36
35
Roller Assemblies
Keel
Support
41
37
Tongue Jacks
49, 50
5
16
16
16
16
22, 23
24
24
23
23
25, 53
Utility Accessories
52
Wiring Harnesses
29
Winch Accessories
Adapter plates
Cable
Handles
Hooks
Straps
34
33
33
33
33
Winches
33
Winchstand
Assemblies
Parts
Weldments
31, 32
34
31, 32
Wheel Assemblies
Aluminum
Galvanized
4
5
WWW.LOADRITE.COM