introducing
Verve IV
Verve IV
Verve IV is a natural progression of the Verve family of linear
luminaires. Practical and budget friendly, this new design aptly
addresses the evolving needs of designers to illuminate spaces
using less energy. A new collection of shielding choices, coupled
with lamping flexibility and high efficiencies provides a superior
lighting solution and great aesthetics in any environment.
Get more with Verve IV.
Verve Family
Verve I
Unobtrusive and sleek indirect. Verve I
has a low-profile look that blends with
architecture.
Verve II
Versatile indirect with perforation and a
wide array of lamping configurations in
a budget-conscious design.
Verve III
High Performance Direct/Indirect. Our
low-brightness parabolic louver adds a
controlled direct component to boost
footcandle levels while maintaining visual
comfort and high efficiency.
Shielding
More Appeal
Frosted Acrylic Lens
Flat Blade Baffle
Round Patterned
Acrylic Lens
Semi-Specular Flat
Blade Parabolic Louver
Square Patterned
Acrylic Lens
Standard with lens shielding, the
debris shield, seen below in orange,
forces dust, dirt and debris to the
sides minimizing their visual impact
on the lens itself.
2.5"
64.5mm
Radial Blade Baffle
Six different shielding options make
Verve IV one of our most aesthetically
versatile luminaires. Choose from a
traditional Radial or Flat Blade Baffle,
Parabolic Louver, or one of three
different lens options. Specify the
Acrylic Overlay to hide lamps from
view on louver and baffle options.
3.8"
96.5 mm
9.0"
229 mm
Flat Blade
Radial Blade
Acrylic Lens
Performance
More Balanced
Verve IV’s indirect/direct distribution contributes the
type of performance needed to meet light level and
energy recommendations, balanced with shielding
options that provide glare control and visual interest.
Choose the louver or baffle for 40% downlight and
classic styling, or a lensed version for modern looks
and more uplight.
60%
40%
Radial Blade Baffle
2-lamp T5
99% efficiency
75%
25%
Frosted Acrylic Lens
2-lamp T5
96.5% efficiency
More Downlight
Open Optic** (Standard)
DR0 (100% downlight)
DR1 (up to 85% downlight)
DR2 (up to 80% downlight)
DR4 (up to 60% downlight)
Verve IV’s optional DR optics deliver light where
you need it. Increased direct illumination suits
ceiling heights from low to high, providing an
opportunity to reduce lamps while maintaining
light levels. Limited indirect illumination creates
a soft glow on the ceiling to minimize contrast
and cave effect.*
*actual percentages vary depending on lamping and shielding. For accurate percentages refer
to IES test data available at www.focalpointlights.com.**4’, Radial Baffle, 2-T5 lamping.
Value Added Options
More Control
Available on all 3-lamp configurations, the downlight reflector optic
(PDR), isolates the center lamp for direct distribution and two outer
lamps for indirect distribution. Independent switching of direct and
indirect light sources makes Verve IV with the PDR optic ideal for
both standard and AV teaching modes in classrooms.
More Energy Conscious
Integrated daylight sensors not only help meet new stricter code
requirements, but keep ceilings clean and eliminate sensor
interference from indirect light produced by the luminaire. Daylight
and occupancy sensors are standard catalog options.*
*Additional sensors may be available to meet your needs.
More Maintainable
Select the clear acrylic dust cover for environments where quick
and easy cleaning is desired. This option provides a smooth surface
for wiping off dust and debris.
All standard configurations meet or exceed our
everGreen™ standard of 80% or more efficiency.
Design Guides
30'x30' | 14' Spacing
Radial Baffle
Frosted Lens
10' Ceiling | 24" Suspension
Radial Baffle
Frosted Lens
8.5' Ceiling | 18" Suspension
1T5HO
32.2
3:1
7:1
29.7
3:1
8:1
33.8
4:1
8:1
31.3
3:1
10:1
2T8
37.6
3:1
7:1
35.0
3:1
8:1
39.3
4:1
8:1
36.8
3:1
9:1
2T5
39.8
3:1
7:1
35.6
3:1
8:1
41.7
4:1
8:1
37.5
3:1
10:1
2T5-DR2
34.7
4:1
4:1
23.9
3:1
6:1
36.0
5:1
5:1
25
4:1
7:1
30'x30' | 10' Spacing
Radial Baffle
Frosted Lens
10' Ceiling | 24" Suspension
Radial Baffle
Frosted Lens
8.5' Ceiling | 18" Suspension
1T5HO
45.4
3:1
6:1
42.3
2:1
7:1
44.9
3:1
8:1
44.8
3:1
8:1
2T8
53.0
3:1
6:1
49.7
3:1
7:1
55.9
3:1
7:1
52.5
3:1
8:1
2T5
56.2
3:1
6:1
50.6
3:1
7:1
59.3
3:1
7:1
53.5
3:1
8:1
2T5-DR2
48.0
3:1
4:1
33.0
3:1
5:1
50.1
4:1
4:1
34.8
3:1
6:1
Average Footcandles
Reflectances: 80/50/20
Workplane Uniformity
Light Loss Factors: T8 - 0.75
T5/T5HO - 0.85
Ceiling Uniformity
Download additional guides at www.focalpointlights.com.
Light levels calculated in AGI-32.
Calculations do not include any
furniture or partitions.
baffle/louver
Verve IV
lens
FV4S
fixture series
FV4S
Verve IV
shielding
Radial Blade Baffle - White
Flat Blade Baffle - White
Semi-Specular, Flat Blade Parabolic Louver
Frosted Acrylic Diffuser
Round Patterned Diffuser
Square Patterned Diffuser
Close-to-Ceiling
Performance
Downlight Reflector - isolates center lamp
Radial Baffle
2T5-DR2
35.1
35.7
5:1
5:1
DR0
DR1
DR2
DR4
100%
Up to 75%
Up to 60%
Up to 50%
Single Circuit
Dual Circuit
2 Lamp T5
3 Lamp T5
1 Lamp T5HO
2 Lamp T5HO
3 Lamp T5HO
2 Lamp T8
3 Lamp T8
Single Circuit
Dual Circuit
5:1
120 Volt
277 Volt
347 Volt
2T5-DR1
2T5-DR2
36.1
36.0
6:1
5:1
4:1
5:1
Even when mounted 6”
from the ceiling, Verve IV
with a DR optic produces
superior ceiling uniformity
and the right amount of
light for most office and
educational applications.
S
D
Electronic Program Start <10% THD
Electronic Dimming Ballast
DC
(May not be combined with AO)
Emergency Circuit
Emergency Battery Pack
HLR/GLR Fuse
Include 3000K Lamp
Include 3500K Lamp
Include 4100K Lamp
Lutron™ Daylight Sensor
EC
EM
FU
L830
L835
L841
LY1
(EcoSystem ballast required)
Lutron™ Sensor Feed
SF
(EcoSystem ballast required)
Philips® Daylight Sensor
PY1
(0–10V dimming ballast required)
WattStopper™ Daylight Sensor
WY1
(0–10V dimming ballast required)
WattStopper™ Occupancy Sensor
WO1
finish
Matte Satin White
Titanium Silver
WH
TS
luminaire length
4'
8'
12'
16' (8'+8')
20’ (12’+8’)
24' (12'+12')
4'
8'
12'
16'
20'
24'
FV4–90
remotes
WYSR
(required for daylight programming,
one included per order)
WattStopper™ Occupant Controller
Dust Cover
Emergency Circuit
Emergency Battery Pack
HLR/GLR Fuse
Include 3000K Lamp
Include 3500K Lamp
Include 4100K Lamp
Lutron™ Daylight Sensor
DC
EC
EM
FU
L830
L835
L841
LY1
(EcoSystem ballast required)
Lutron™ Sensor Feed
SF
(EcoSystem ballast required)
Philips® Daylight Sensor
PY1
(0–10V dimming ballast required)
WattStopper™ Daylight Sensor
WY1
(0–10V dimming ballast required)
WattStopper™ Occupancy Sensor
WO1
finish
Matte Satin White
Titanium Silver
WH
TS
luminaire length
4'
8'
12'
16' (8'+8')
20’ (12’+8’)
24' (12'+12')
4'
8'
12'
16'
20'
24'
integrator options
90-degree Corner
FV4–90
(specify quantity)
WattStopper™ Daylight Setup Remote
WYSR
(required for daylight programming,
one included per order)
(specify quantity)
WattStopper™ Daylight Setup Remote
(Specify “J" in place of “C" for 5" dia.
canopies at power feed and 2" dia.
canopies at non–feed locations)
(Consult factory for sloped ceiling applications)
remotes
integrator options
90-degree Corner
C24
C48
C96
factory options
AO
(T5, T5HO only. May not be combined with DC)
Dust Cover
24" Cable Suspension
48" Cable Suspension
96" Cable Suspension
factory options
S
D
mounting
C24
C48
C96
(Specify “J" in place of “C" for 5" dia.
canopies at power feed and 2" dia.
canopies at non–feed locations)
(Consult factory for sloped ceiling applications)
Acrylic Overlay on Louver or Baffle
E
(T8 Only)
mounting
24" Cable Suspension
48" Cable Suspension
96" Cable Suspension
120
277
347
ballast
Electronic Instant Start <20% THD
E
(T8 Only)
Electronic Program Start <10% THD
Electronic Dimming Ballast
1C
2C
voltage
120
277
347
ballast
Electronic Instant Start <20% THD
8’ Ceiling | 12” Suspension
2T5
3T5
1T5HO
2T5HO
3T5HO
2T8
3T8
(Multiple lamp luminaires only)
voltage
120 Volt
277 Volt
347 Volt
DR0
DR1
DR2
DR4
circuit
1C
2C
(Multiple lamp luminaires only)
4:1
downlight
downlight
downlight
downlight
lamping
2T5
3T5
1T5HO
2T5HO
3T5HO
2T8
3T8
circuit
8’ Ceiling | 6” Suspension
PDR
(3-lamp & dual circuit options only)
lamping
2 Lamp T5
3 Lamp T5
1 Lamp T5HO
2 Lamp T5HO
3 Lamp T5HO
2 Lamp T8
3 Lamp T8
30'x30' | 14' Spacing
2T5-DR1
downlight
downlight
downlight
downlight
AC
RA
SA
shielding accessories
PDR
(3-lamp & dual circuit options only)
100%
Up to 85%
Up to 80%
Up to 60%
FV4S
shielding
RB
FB
PL
shielding accessories
Downlight Reflector - isolates center lamp
FV4S
fixture series
WOR
WattStopper™ Occupant Controller
WOR
©2010 Focal Point LLC, 4141 S. Pulaski Road, Chicago, Illinois 60632, www.focalpointlights.com, T 773.247.9494, F 773.247.8484
All rights reserved. “Focal Point”, “The Art of Light”, everGreen, Verve and the Light-Ray Graphic are trademarks or registered
trademarks of Focal Point, LLC. Products shown in this brochure may be covered by U.S. patents and patents pending.
Visit focalpointlights.com for specifications and other details on our entire Focal Point catalog.
01/10 #MKT1086