PKWS – Parkway Square Small Housing Scale
•
Four optical systems: horizontal, LED,
vertical, and indirect
•
Highly efficient LEDs
•
0-10V dimmable 1
•
Three hood styles to configure a look in
harmony with your architecture
TYPE
•
Six decorative screen options
•
Tool-less access
•
Wide variety of custom mounting
options, including post-top, wall
mount, or pole mount arm
•
Cast aluminum struts
•
Full cutoff options
•
Powder coat finish in 13 standard
colors with a polymer primer sealer
•
Custom 3" square pole perfectly
complements luminaire styling
1. LUMINAIRE 2. HOOD 3. OPTICS 4. LAMP/BALLAST 5. SCREEN 6. COLOR
7. OPTIONS
GENERAL
1.
LUMINAIRE
PKWS
5. DECORATIVE SCREEN (Painted to match fixture.
Parkway Square Accent (small scale)
2. HOOD
ANGLED INDIRECT STRAIGHT
ANGIND STR
DOUBLE
DBL
3. OPTICS
HORIZONTAL LED (ANG hood and LEDs only. Flat glass lens)
T1 (Type 1) 8. MOUNTING
T3 (Type 3. DLC Listed) T5 (Type 5. DLC Listed)
VERTICAL LED
GLA (Frosted glass diffuser)
HORIZONTAL OPTICAL SYSTEM (ANG hood only. Not for
LEDs. Flat glass lens)
H2 (Type 2)
H3 (Type 3)
H4 (Type 4) H5 (Type 5)
VERTICAL OPTICAL SYSTEM (Not for IND. Clear acrylic
cylinder)
GLA (Frosted glass diffuser)
GR3 (Type 3, glass refractor)
GR5 (Type 5, glass refractor)
INDIRECT OPTICAL SYSTEM (IND hood only. Not for LEDs.
Clear acrylic cylinder. Underside of hood painted in high reflectance white)
-3 (Type 3)
-5 (Type 5)
Also available in stainless steel or copper. Not available with
horizontal optics)
INFINITY
OFFSET
WHEAT
DSINDSOF DSWH
TRIO
SHUTTER
DSTRDSSH
CUSTOM
DSCS
6. COLOR
WH Arctic White
BL Black
BLT Matte Black
DB Dark Bronze
DGN Dark Green
TT Titanium
WDB Weathered Bronze
MDB Bronze Metallic
VBU Verde Blue
CRT Corten
MAL Matte Aluminum
MG Medium Grey
AGN Antique Green
LG Light Grey
RAL Premium Color
CUSTOM * * Contact Factory
7.OPTIONS
GENERAL
ULS (Upper lens shield)
LDL (Lightly diffused lens)
4. LAMP/BALLAST
347 (120/240/347 volt. HID only, except 50MH and 50HPS)
LED (Warm white (3000K), Neutral white (4000K), Bright white (5000K).
Class 2, 120 thru 277 volt.)
36LED-WW 36LED-NW36LED-BW
HOOD
COP (Copper)STS (Stainless steel)
GLA only:
9LED-WW 19LED-NW 19LED-BW 1
18LED-WW 18LED-NW18LED-BW
DECORATIVE SCREEN
CPR (Copper)SSP (Stainless steel)
Note: 1 9LED configurations not dimmable
COMPACT FLUORESCENT (GE F70QBX lamp. Start -10°C min)
CF
COSMOPOLIS™ (PGZ12 base, CosmoPolis™ lamp. Not for
horizontal or LED optics)
60CO
METAL HALIDE
(Not for horizontal or LED)
Medium base, ED-17 lamp. 50MH
70MH
G12 base, T-6 ceramic lamp
70MHT6
HIGH PRESSURE SODIUM
(Not for horizontal or LED)
Medium base, ED-17 lamp
50HPS70HPS
ELECTRONIC METAL
HALIDE
Medium base, ED-17 lamp
70MHEB
G12 base, T-6 ceramic lamp
70MHT6EB39MHT6EB
PGJ5 base, Mini Master color lamp. Not for horizontal or LED optics 20MMC39MMC
8. MOUNTING – Standard fixture shall slip over a 3” / 76mm
pole or tenon or may choose one
ARM POLE MOUNT (Mounts to the side of a 4” / 102mm
diameter pole or post)
PSA-TU (Fixture above with up-swept arm)
PSA-TD (Fixture above with down-swept arm)
PSA-BU (Fixture below with up-swept arm)
PSA-BD (Fixture below with down-swept arm)
WALL MOUNT
PSA-WM (Fixture above with up-swept arm)
PSA-WM (Fixture above with down-swept arm)
PSA-WM (Fixture below with up-swept arm)
PSA-WM (Fixture below with down-swept arm)
SPECIFICATIONS
HOUSING
Parkway Square housings are cast aluminum,
A356 alloy, free of any porosity, foreign materials,
or cosmetic fillers. The ballast is mounted
internally and accessed by loosening four captive
bolts and lifting away the lamp compartment. One
stainless steel latch shall release the door to allow
access to the lamp. The lamp compartment is
sealed with a molded silicone gasket. The reflector
cone is matte finished aluminum. All lenses are
molded, seamless high impact lighting grade
acrylic. The lens is sealed to the housing with a
molded silicone gasket on the top and bottom.
The vertical struts are cast aluminum and painted
to match the fixture. All internal and external
hardware is stainless steel. The fixture shall slip
over a 3”/76mm round post top and secured with
four stainless steel set screws. The hood is formed
from 5052 H32 aluminum, 304 stainless steel or
110 copper. For indirect models, the underside
of the painted, copper, and stainless steel hoods
are finished in a high reflectance white powder
coating. Copper hoods are unfinished to develop
a patina.
The horizontal reflector door shall be cast
aluminum painted to match the fixture. The internal
horizontal reflector module is sealed from the outer
housing with a silicone gasket. The tempered
glass lens shall be sealed to the housing with a
silicone gasket. A pair of stainless steel latches
shall release the door to allow access to the
lamp. The reflector module shall be composed of
faceted, specular and semi-specular anodized
aluminum panels. The reflector assembly shall
be removed by loosening four screws and lifting
it out. The reflector tray shall be rotatable on 90°
centers for orienting the light distribution. The
horizontal lamp reflectors shall meet ANSI-IES
standards for full cutoff reflector systems when
using arm in the BU or BD configuration.
The GLA element is frosted borosilicate glass
with a twist on connection to the lower cone
assembly. The cone is matte finished anodized
aluminum. The GR3 and GR5 are precision
molded borosilicate glass refractors with a Type 3
or Type 5 distribution. The refractors are mounted
to a gasketed aluminum holder with an internal
pressure plate.
See next page
Visit www.aal.net for Arms, Poles & Accessories
Specification Guide
All fixtures prewired for 277 volts unless specified. Lamps not included (except
LED options). CosmoPolis™ is a trademark of Philips Lighting®.
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 2.15
PKWS
HOOD SCREEN
JOB
TYPE
NOTES
| 1 |
PKWS – Parkway Square Small Housing Scale
TYPE
ELECTRICAL
DIMENSIONS
The ballast shall be integral to the fixture mounted on
Photometric Report
HOOD
a prewired module with a quick disconnect plug.CATALOG
The
NUMBER: PKWS-ANG-H3-70MHT6
STR
IND
ANG
ballast module has two keyhole slots and is removable by
FILENAME: PKWS-ANG-H3-70MHT6.IES
Straight Hood
Indirect Hood
Angled Hood
loosening four screws. Sockets are pulse rated porcelain.
IESNA:LM-63-2002
HID ballasts are high power factor, rated for -30°C
starting.
(Underside
[TEST] KL02299
The compact fluorescent ballast shall be electronic
for KIM LIGHTING
[TESTLAB]
finished
[TESTDATE]
10-11-2010
use with 4 pin lamps (GX24q-4 socket) rated for [ISSUEDATE]
-18° C
in high
03-16-2011
starting temperature. Ballasts are wired at the factory
for ARCHITECTURAL AREA LIGHTING
[MANUFAC]
reflectance
[LUMCAT]
PKWS-ANG-H3-70MHT6
277 volts, unless specified. The LED driver shall[LUMINAIRE]
be integralPARKWAY SQUARE ACCENT SCALE
white)
to the fixture mounted on a prewired module with[MORE]
a quick
ALUMINUM ANGLED HOOD WITH CAST ALUMINUM HOUSING AND LENS FRAME.
[MORE] CLEAR FLAT GLASS LENS. SPECULAR ALUMINUM REFLECTOR SYSTEM.
disconnect plug. The driver module has two keyhole
slots
[LAMP] 70 WATT MH, T6 LAMP.BASE-DOWN POSITION. RATED AT 6000
and is removable by loosening four screws. The [MORE]
driver INITIAL
shall LUMENS.
accept 120 thru 277 volts input, with output driveSUMMARY
current DATA
Horizontal Optics
Vertical Optics
Vertical Optics
of 350ma. Standard color temperatures for LEDs shall be
HT: 23"/584 mm
HT: 21.75"/553 mm
HT: 21.75"/553 mm
EFFICIENCY (Total):
75.4 %
3000K, 4000K, and 5000K. Rated luminous efficacy
of
DIA: 14"/356 mm
DIA: 21"/533 mm
EFFICIENCY (Down / Up):
75.4 % / DIA:
0.0 %14"/356 mm
luminaire shall be >40 lm/w, with rated light output
of >1600(Street / House):
EFFICIENCY
51.4 % / EPA:
24.0 %1.46
EPA: 1.68
EPA: 1.52
ROADWAY CLASSIFICATION:
TYPE II, MEDIUM
lumens for 5000K LED, standard mount.
WT: 34 lbs.
WT: 44 lbs.
WT: 45 lbs.
CUTOFF CLASSIFICATION:
FULL CUTOFF
LUMENS/LAMP:
INSTALLATION & MOUNTING
NO. OF LAMPS:
LUMINOUS OPENING:
The PKWS shall be factory supplied as a complete,
Width:
prewired assembly. The fixture shall slip over a 3”/75mm Length:
Height:
open top round pole or 4”/100mm pole mounted arm
and NUMBER:
CATALOG
INPUT WATTS:
secured and leveled with 4 stainless steel set screws
6000
Wednesday, July 11, 2012
DBL
Double Hood
Vertical Optics
HT: 21.75"/553 mm
DIA: 21"/533 mm
EPA: 1.56
WT: 46 lbs.
DECORATIVE1 SCREENS
RECTANGULAR
Painted to match1.08
fixture.
Also available in stainless steel or copper. Not available with horizontal optics.
(Feet)
Photometric Report
1.08
0.92
PKWS-ANG-T5-36LED-BW
94
Wednesday, July 11, 2012
FILENAME: PKWS-ANG-T5-36LED-BW.IES
FINISH
IESNA:LM-63-2002
28480
Fixture finish consists of a five stage pretreatment[TEST]
regimen
SCIENCES, INC.
with a polymer primer sealer, oven dry off and top[TESTLAB]
coated LIGHTING
[ISSUEDATE]
02/10/2011
[TESTDATE]
03/16/2011
with a thermoset super TGIC polyester powder coat
[MANUFAC] ARCHITECTURAL AREA LIGHTING
finish. The finish shall meet the AAMA 605.2 performance
DSWH
DSIN
DSOF
DSTR
[LUMCAT] PKWS-ANG-T5-36LED-BW
PARKWAY SQUARE
ACCENT SCALE
specification which includes passing a 3000 hour[LUMINAIRE]
salt
Wheat
Infinity
Offset
Trio
[MORE] ALUMINUM ANGLED HOOD WITH CAST ALUMINUM HOUSING AND LENS FRAME.
spray test for corrosion resistance.
[MORE] TYPE 5 OPTIC, WITH SPECULAR REFLECTORS AND CLEAR FLAT GLASS LENS.
DSSH
Shutter
DSCS
Custom
[LAMP] THIRTY CONSTANT CURRENT LEDS. 5100K. LUMINAIRE OUTPUT: 961 Lms.
CERTIFICATION
[OTHER] TWO HIGH PERFECTION LP102-36-CO620 DRIVERS OPERATING AT 120 VAC AND 38.9 WATTS
PKWS H3 70MHT6
WATTAGE:ISO-ILLUMINANCE
94
LUMEN
OUTPUT:
DIAGRAM
(fc) 4524
The fixture is listed with ETL for outdoor, wet location use.
SUMMARY DATA
Conforms to UL1598 and Canadian CSA Std. C22.2 no.9.
B1 U0 G1
EFFICIENCY
- 196074.5 %
IP66 rated for horizontal configurations and IP66 rated
for (Total):
FORWARD LIGHT
LUMEN
EFFICIENCY (Down / Up):
- 196074.5 %
/ 0.0 %
vertical configurations.
o - 99444.6 %
EFFICIENCY (Street / House):
7.7% / - 96623.4
349 %
FL30
ROADWAY CLASSIFICATION:
TYPE
II,
VERY
SHORT
o
33.3% 1507
CUTOFF CLASSIFICATION:FM60 NONCUTOFF
0.01
WARRANTY / TERMS AND CONDITIONS OF SALE
LUMENS/LAMP:
0.02
FH80 o -1 26.9% 1219
0.05
0.10.2
NO. OF LAMPS:
1
Download:
0.2%
FVH90 o RECTANGULAR
8
LUMINOUS OPENING:
0.5
http://www.hubbelllighting.com/resources/warranty/
1.
Width:
0.00 (Feet)
BACK LIGHT0.00
Length:
o 0.00
Height:
6.2%
282
BL30 38.9
INPUT. WATTS:
AAL reserves the right to change product specifications without notice
BM60 o 15.8%
716
o
9.6%
BH80
435
0.2%
BVH90 o
8
UPLIGHT
UL100 o
UH180 o
0% 0%
0
0
PKWS T5 36LED BW
FL30 o 15.9%
FM60 o 29.0%
FH80 o 5.5% FVH90 o 0.3%
WATTAGE: 38.9
LUMEN OUTPUT: 1961
ISO-ILLUMINANCE DIAGRAM (fc)
LUMEN
311
568
108
6
0.01
BACK LIGHT
BL30 o
BM60 o
BH80 o
BVH90 o
15.8%
28.4%
4.8% 0.3%
309
558
95
5
UPLIGHT
UL100 o
UH180 o
0% 0%
0
0
Mounting 0%
UPLIGHT
Height
Multiplier
DOWNLIGHT
75.4%
-----------------------10
15
20
25
30
35
40
45
50
4.000
1.778
1.000
0.640
0.444
0.327
0.250
0.198
0.160
+ = Point of max candela
12' MOUNTING
Mounting
Height =HEIGHT
20 Feet. Each box represents one mounting height.
B1 U0 G0
Reported data calculated from manufacturer's data file, based on IESNA recommended methods.
LIGHT
Photometric ViewerFORWARD
v3.4
EFFICACY: 48.1 Lm/W
0.02
0.05
0.1
0.2 0.5
1.
EFFICACY: 50.4 Lm/W
Mounting 0%
UPLIGHT
Height
Multiplier
DOWNLIGHT
100%
-----------------------10
15
20
25
30
35
40
45
50
4.000
1.778
1.000
0.640
0.444
0.327
0.250
0.198
0.160
+ = Point of max candela
12'
MOUNTING
Mounting
Height =HEIGHT
20 Feet. Each box represents one mounting height.
IES files can be found at www.aal.net
ARCHITECTURAL AREA LIGHTING
from manufacturer's data file, based on IESNA recommended methods.
16555 East Gale Ave. | City of Reported
Industrydata
| calculated
CA 91745
Photometric Viewer v3.4
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | REV 2.15
| 2 |