Bulletin 800S
Standard Duty Stations
10
Type 1 or 4
Complete Assembled Stations
Pilot Lights
Push button stations with pilot lights can operate on either 120V or 240V by changing connections. A red pilot lens is supplied.
Selector Switches
All two-position Bulletin 800S standard duty selector switch stations can be changed to three-position in the field, and the
three-position selector switches can be changed to two-position. Instructions for changing are included with each station.
In addition to the standard marking, all selector switches are supplied with adhesive-backed metal legend plates, marked as follows:
OFF-ON, FOR-REV, HAND-AUTO, OPEN-CLOSE, HIGH-LOW, SUMMER-WINTER, SUMMER-OFF-WINTER, HIGH-OFF-LOW,
OPEN-OFF-CLOSE, FOR-OFF-REV, HAND-OFF-AUTO.
Flush Mount Units fit a standard GEM
or Handy Type Wall Box. Contact Symbol 3
Cat. No. 800S-2AS
Type 1 Flush Mount Unit ➊ — Wall Box not included
Description and
Legend Marking
START-STOP
Contact Symbol
3
Gray Painted Flush Plate
Cat. No.
800S-2AS
Stainless Steel Flush Plate
Cat. No.
800S-2ASQ
➊ Not rated for DC operation.
1
Cat. No. 800S-2SAP
Cat. No. 800S-2SCM
Momentary Contact Buttons and Pilot Light — 120V or 240V, Type 1
Description and
Contact
Cat. No.
Legend Marking
Symbol
START-STOP
6
800S-2SAP
Cat. No. 800S-R3SX
Selector Switches — Type 1
Description and
Contact
Legend Marking
Symbol
OFF-ON — 2-position
HAND-OFF-AUTO — 3-position
8
9
Maintained Contact Buttons — Type 1
Description and
Contact
Legend Marking
Symbol
7
ON-OFF
START-STOP
7
Cat. No.
800S-2SCM
800S-2SBM
Cat. No. 800S-R2SXP
Cat. No.
800S-R2SX
800S-R3SX
Selector Switch and Pilot Light — 120V or 240V, Type 1
Description and
Contact
Cat. No.
Legend Marking
Symbol
OFF-ON — 2-position
HAND-OFF-AUTO — 3-position
10
11
800S-R2SXP
800S-R3SXP
10-325
Bulletin 800S
Standard Duty Stations
Type 1 or 4
Complete Assembled Stations, Continued
Cat. No. 800S-2SA
Description and
Legend Marking
Cat. No. 800S-2SA4
Contact
Symbol
Type 1
Cat. No.
Cat. No.
STOP — N.C. Contact
STOP — N.O. Contact
START
1
2
2
800S-1SA
800S-1SAK
800S-1SB
800S-1SA4
800S-1SAK4
800S-1SB4
START-STOP — N.O. - N.C. Contact
START-STOP — N.O. - N.O. Contact
FOR-REV
OPEN-CLOSE
ON-OFF — N.O. - N.C. Contact
ON-OFF — N.O. - N.O. Contact
RAISE-LOWER
UP-DOWN
3
4
4
4
3
4
4
4
800S-2SA
800S-2SAK
800S-2SB
800S-2SF
800S-2SE
800S-2SEK
800S-2SD
800S-2SC
800S-2SA4
800S-2SAK4
800S-2SB4
800S-2SF4
800S-2SE4
800S-2SEK4
800S-2SD4
800S-2SC4
FAST-SLOW-STOP
FOR-REV-STOP
OPEN-CLOSE-STOP
RAISE-LOWER-STOP
UP-DOWN-STOP
5
5
5
5
5
800S-3SF
800S-3SA
800S-3SD
800S-3SB
800S-3SC
—
Momentary Contact Buttons
0
Type 4
Die Cast Aluminum Enclosure ➊➋
➊ Not rated for DC operation.
➋ Flip levers permit attachment of lock without additional accessory.
Contact Ratings — (IEC 337-1) (NEMA ICS 2-125) Maximum Continuous Current Ith 5 A. Bulletin 800S push button stations have
control circuit ratings as follows:
Utilization Category
Maximum
Operational Voltage Ue
IEC
AC 600
DC 600
Rated Operational Current
NEMA
Volts
Ue
Make
Break
AC-11
B600
480…600
240…480
120…240
3600V A
3600V A
30 A
360V A
360V A
3.0 A
DC-11
P600
28…600
24…28 ➌
138V A
5.0 A
➌ For applications below 24V and 24 mA, Bulletin 800T units with Logic Reed, sealed switch, or stackable sealed switch contact blocks are
recommended.
10-326
Bulletin 800S
Standard Duty Stations
Type 1 or 4
Accessories
Complete Assembled Stations
Description
Pilot Light Lens
Red lens replacement cap.
Cat. No.
800S-N90R
Pilot Light Lens
Cat. No. 800S-N90R
Lamp
120V Lamp
800S-N60
Locking Attachments
This device is used with extended push buttons or 2-position selector switches.
800S-N1
Lamp
Cat. No. 800S-N60
1
This device is used with 3-position selector switches, to lock in the right or left
position.
800S-N4
Locking Attachments
Cat. No. 800S-N1
10-327
Bulletin 800S
Standard Duty Stations
Type 1 or 4
Approximate Dimensions and Shipping Weights
Dimensions in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes.
Type 1 — General Purpose Enclosures
Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits
(Top & Bottom)
7/ (5.6) Dia.
32
Mtg. Holes (2)
Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits
(Top & Bottom)
1 1/32
(26.2)
7/ (5.6) Dia.
32
Mtg. Holes (2)
4 1/16
2 (103.2)
(50.8)
1 1/32
REV
Padlocking
Adjustment
1 1/8
(28.6)
(22.2)
1/
8
2 7/32
(56.4)
(3.2)
2 5/16
(58.7)
For Stop Button Only
Knockouts for 1/2 (12.7) & 3/4 (19.1) Conduits
(Top & Bottom)
7/
7/
8
16
(22.2)
(11.1)
5/
8
(15.9)
OFF
HAND AUTO
3 9/32
(83.3)
Padlocking
Adjustment
Insulation
1 1/8
(28.6)
1 1/2
(38.1)
Two-Unit Flush Mounting Station
Shipping Wt. 1 lb (0.45 kg)
2 5/16
(58.7)
3/
8
(9.5)
7/
2(56.4)
32
(22.2)
Selector Switch Surface Mounting Station
Shipping Wt. 1 lb (0.45 kg)
Type 4 — Watertight Enclosure
2 15/16
(74.6)
3 7/16
(87.3)
1/
2
(12.7)
START
5 1/4
(133.4)
6 1/8
(155.6)
STOP
3/ (19.1) Pipe Tap
4
CL
3/
4
(19.1)
2 1/8
(54)
19/ (7.5) Dia. Mtg. Holes (4)
64
Shipping Wt. 3 lbs (1.36 kg)
10-328
4 1/16
(103.2)
5/
8
(15.9)
1/
2
(12.7)
4 5/8
(117.5)
2 13/16
(71.4)
CL of Conduit
1 7/8
(47.6)
STOP
2 7/32
(22.2)
(56.4)
7/
8
(22.2)
Three-Unit Surface Mounting Station
Shipping Wt. 2 lbs (0.91 kg)
7/ (5.6) Dia.
32
Mtg. Holes (2)
START
5/8
(15.9)
1/ (3.2) for
8
Stop Button
Only
One- and Two-Unit
Surface Mounting Stations
Shipping Wt. 1 lb (0.45 kg)
2 3/4
(69.9)
CL
(12.7)
1 1/8
(28.6)
0
4 1/8
(26.2)
(104.8
5 3/8
(136.5)
STOP
7/
8
2 5/16
(58.7)
7/
8
(22.2)
1/
2
(26.2)
Padlocking
Adjustment
1/
2
(12.7)
FOR
CL
STOP
1/
2
(12.7)
7/
8
(22.2)
of Conduit
START
5/8
(15.9)
7/
8
(22.2)