Draft Rev.A Aug/06/2008 High Output Power, High Efficiency Half Brick, SV24-32-400-B Module: 18Vdc to 36Vdc Input, 32Vdc Output, Output Power Up to 400W. FEATURES: World's Most Advanced High Power Density DC-DC Converters. • Miniature Size: 61.0mm x 57.9mm x 12.7mm (2.40in. x 2.28in. x 0.50in.) (Typical) • High Power Density: Up to 146.2W/in.^3 • High Efficiency: 92% Typical • Low Output Noise • Industry-Standard Size • Metal Baseplate • Thermal Protection • Input Under Voltage Protection • Output Over Voltage Protection • Current Limit/Short Circuit Protection • Adjustable Output Voltage: 90% to 110% of Vo,set DESCRIPTION: The SUPERVERTERTM module is a high density DC-DC converter designed for use in distributed • Remote Sense power architectures, workstation, EDP equipment, • RoHS Compliant and telecommunication applications. The sur- • Safety: TBD face-mount construction uses a metal baseplate and planar transformer to produce up to 400W in a half brick package. The SUPERVERTERTM module is a suitable replacement for all industry. OPTIONS • Remote On/Off Logic Configuration • Heat Sink Available for Extended Operation 1 Web Site: http://www.acbel.com Draft Rev.A Aug/06/2008 SPECIFICATIONS: ABSOLUTE MAXIMUM RATINGS PARAMETER Input Voltage (+In to –In) Storage Temperature Storage Humidity Operating Temperature Operating Humidity MIN -0.3 -0.3 -40 10 -40 TYP 30 MAX 50 36 125 95 100 UNITS V V ℃ % ℃ 95 % MAX 36 28 2 UNITS V A A^2s 15 mAp-p CONDITIONS <100ms Continuous Temperature measure shall be taken from the baseplate (Tb). INPUT SPECIFICATIONS: PARAMETER Operation Input Voltage (Vi) Maximum Input Current (Ii,max) Inrush Transient Input Reflected-Ripple Current: Peak-Peak Input Ripple Rejection Input Under Voltage Protection: Turn-on Threshold Turn-off Threshold MIN 18 TYP 24 7 60 dB V V V 17 16 18 15 PARAMETER Output Set Point (Vo,set) MIN 31.95 TYP 32 MAX 32.05 UNITS V Output Voltage Accuracy Output Voltage Tolerance Band Line Regulation Load Regulation Temperature Drift Output Ripple and Noise Voltage Peak to Peak 31.7 -3 32 32.3 +3 0.2 0.2 0.02 V % % % %/ ℃ 350 mVp-p 12.5 A A CONDITIONS Vi=18V, Io =Io,max 5HZ to 100MHZ, Io=Full Load, 12uH source impedance 120Hz Vo=32V, Io =Io,max. OUTPUT SPECIFICATIONS: Output Current Io,min Io,max 0 Output Current Limit 110 125 %Io,max Output Short Circuit Current Output Over Voltage Protection External Capacitance 112 10 140 Arms %Vo,set uF 1000 2 CONDITIONS Initial Adjusted Tb=25℃,Vi=24V, Io=Io,max Io=Io,max All Operating Condition Vi=18V to 36V Io= Io,min to Io,max. Tb= -40 to 100℃ Bandwidth 5Hz to 20MHz and with 0.1uF MLCC. Output Capacitor: 1000uF At Vo<=32V, if Vo>32V, Output Power (Po) should be less than its rating power. Current limit inception point Vo=90% of Vo,set Hiccup Mode Io=0.5A Web Site: http://www.acbel.com Draft Rev.A Aug/06/2008 OUTPUT SPECIFICATIONS (CONTINUED): PARAMETER MIN Efficiency TYP 92 MAX UNITS % Dynamic Response: 25% - 50% -75% load, ΔIo/Δt=0.1A/us; with Output Capacitor 220uF/50V, 3 Peak Deviation Settling Time 300 %Vo,set us MAX UNITS 0.8 V V CONDITIONS Vi=24V, Vo=32V, Io=80 % of Io,max, Tb=25 ℃. Vi=24V, Vo=24V, Io=33 % of Io,max, Tb=25 ℃. Vi=24V, Tb=25oC Duration outside of Vo,set +/- 1.0% error band CONTROL SPECIFICATIONS: PARAMETER Logic ON/OFF Remote: Positive: Off-State Voltage On-State Voltage MIN TYP 2.0 Negative: Off-State Voltage On-State Voltage Turn-On Time Output Voltage Trim Range Over Temperature Protection Shutdown Recovery 2.0 0.8 30 90 100 90 110 105 110 V V ms %Vo,set o C C o CONDITIONS Vo=90% of Vo,set Refer to Trim Circuit. Refer to Fig.3 for location definition Auto. Recovery ISOLATION SPECIFICATIONS: PARAMETER Input to Output Input to Case Output to Case Input to Output Capacitance Isolation Resistance MIN TYP 1500 1500 500 2000 MAX 100 UNITS Vdc Vdc Vdc pF Mohm CONDITIONS 60 seconds 60 seconds 60 seconds At Tb=25℃, 70%RH, Output to Baseplate 500VDC STRUCTURAL DYNAMICS: PARAMETER Vibration Shock CONDITIONS Sine Wave, 10-55Hz (Sweep for 1 min.), Amplitude 0.825mm Constant (Maximum 5g) X,Y,Z 1 Hour each, At No Operating, 20g, 166 in/sec, Square Wave GENERAL SPECIFICATIONS: PARAMETER MTBF Weight Size (WxHxD) MIN TYP 2 TBD 2.40x2.28x0.5 3 MAX UNITS Mhrs CONDITIONS Tc=40℃, Io=80% of Io,max g in.^3 Web Site: http://www.acbel.com Draft Rev.A Aug/06/2008 TRIM CIRCUIT: A. Trim down: The resistor for output voltage trim-down function could be calculated with the following formula: + Out 100 Rtrim − down = -2 ∆% +Sense Trim Rtrim-down Load ( k Ω) Δ%: Desired output voltage change. -Sense -Out Fig. 1 The schematic for output voltage trim down. B. Trim up: The resistor for output voltage trim-up function could be calculated with the following formula + Out V (100 +∆%) (100 + 2∆%) Rtrim−up = O − ∆% 1.225∆% +Sense Load Trim Rtrim-up (kΩ) Vo: The required output voltage. Δ%: Desired output voltage change. -Sense -Out Fig. 2 The schematic for output voltage trim up. OUTLINE DRAWING: 4 Web Site: http://www.acbel.com