NEW!
TEMPERATURE
Accessories for Temperature Products
Temperature Sensor Accessories
ADJUSTABLE PIPE BRACKET
MODEL APB-28
The APB-28 is used with Model ST-R*SC, ST-MP*, KTMP*,
STR* S, KTM*SC, KTM*S sensors. The bracket can be used
on pipe sizes from 2" to 8" (5.08 to 20.32 cm) outside diameter.
Precon TCC-12 thermal conducting compound should be used
with the bracket to improve heat transfer between the pipe and
the temperature sensor. Insulate approximately 2' (61m) on
each side of the probe for best results.
Adjustable for
2" to 8" pipe
(5-20 cm)
APB-28
in
(cm)
ADAPTER BRACKET
MODEL BKT-1
4.25
(10.80)
The BKT-1 can be used with Models WMB-1 or ST-S*P to
mount directly on a standard electrical box. Mounting screws
are provided.
BKT-1
2.5
(6.35)
in
(cm)
DRYWALL ADAPTER BRACKET
MODEL BKT-2
The BKT-2 is used to mount wall sensors directly to drywall
quickly and securely. Simply cut a hole and bend the ears over
the back of the drywall. Then, secure with supplied drywall
screws
4.25
(8.25)
BKT-2
TEMPERATURE
2.75
(6.99)
in
(cm)
ADAPTER PLATE
MODEL ISPL-1, SSPL-1
The ISPL-1 ivory model and the SSPL-1 stainless steel
model are standard light switch plates that can be used with
the BKT-1 as attractive mounting plates for installing a Model
WMB-1 or ST-S*P on a standard electrical box. Mounting
screws are provided.
4.25
(10.80)
ISPL-1
SSPL-1
29
⁄32''
7"
The 10-531 plate is ideal for cover mounting holes from old
sensors. For the KTR*, ST-S*EW, ST-T90EW, ST-T91E,
ST-T91K.
C
5.25"
D
A
C
B
4½''
3¼''
2¼''
SENSOR ADAPTER PLATE
MODEL 10-531
1¾''
3¼''
D
B
C
B
20
13/16''
A
10-531
Rear View (not actual size)
SENSOR COVER REMOVER TOOL 1/16"
MODEL KT-1
The KT-1 tool fits Kele and most TAC, Johnson Controls, and
Siemens covers. The tool has a 1/16" hex top and a reversible
blade (flat and Philips).
March 2014
in
(cm) 2.25
(5.72)
1.0
(2.54)
Exposed
Insert
WE MAKE IT EASY.
2.65
(6.73)
KT-1
kele.com
0.37
(0.95)
TM
888-397-5353 USA
1297
TEMPERATURE
NEW!
Accessories for Temperature Products
Temperature Sensor Accessories
in
(cm)
BRUSHED ALUMINUM FACEPLATE
MODEL PN-10
The PN-10 is a blank Brushed Aluminum Faceplate for use
with the WMB-1 enclosure. Customized logos are available.
Shown with
custom logo
1.63
(4.13)
2.63
(6.67)
in
(cm)
DECORATIVE FACEPLATE
MODELS PN-26, PN-32
PN-10
Shown with
custom logo
The gray PN-26 or tan PN-32 Decorative Faceplates are
available for use with the WMB-2 enclosure. Customized logos
are available.
1.38
(3.49)
1.75
(4.45)
in
(cm)
RAW SENSOR CLIP
MODEL PN-46
0.31
(0.8)
The PN-46 is used where an aluminum clip is desired to mount
a raw sensor into an existing enclosure. The PN- 46 includes
adhesive backing for easy installation.
TEMPERATURE
PN-26
SPANNER DRIVER
MODEL SD-6
The SD-6 Spanner Driver is used to install the security screws
(XS option) for the ST-S* sensor.
0.63
(1.59)
PN-46
in
(cm)
SD-6
3.88
(9.84)
XS Option Screw Head
THERMAL CONDUCTING COMPOUND
MODEL TCC-12
20
The TCC-12 Thermal Conducting Compound is a metal oxidefilled, dielectric, silicone-based compound that facilitates heat
transfer by filling voids and gaps between mating surfaces. The
operating temperature range is -40° to 302°F (-40° to 150°C).
The compound is packaged in convenient, single-application,
0.13 fl oz (12 gram) tubes.
TCC-12
THERMAL CONDUCTING COMPOUND
MODEL TCC-111
The TCC-111 Thermal Conducting Compound consists of
an aluminum powder in a barium grease-based compound.
It facilitates heat transfer by filling voids and gaps between
mating surfaces. The operating temperature limit is -40°
to 302°F (-40° to 150°C). The compound is packaged in a
convenient 3.75 fl oz (111 mL) tub.
1298
888-397-5353 USA
kele.com
TCC-111
When you need it right, right now, call Kele.
March 2014
NEW!
TEMPERATURE
Accessories for Temperature Products
Temperature Sensor Accessories
SOLAR COMPENSATOR
MODEL M-2500
1.75
(4.45)
in
(cm)
The Johnson Controls Model M-2500 Solar Compensator
is a non-directional device used to compensate for the solar
effects on buildings. Mount outside in sunlight to measure
the solar gain experienced by the building envelope. Any 1/4"
probe may be inserted into the solar chamber. This device is
ideal for tuning perimeter hot water reset to each building's
requirements.
4.31
(10.95)
4.25
(10.8)
Probe
Insert
M-2500
5.86
(14.88)
7.13
(18.11)
0.31
(0.79)
1/2 EMT
Conduit Nut
3.75 (9.53)
PRECISION RESISTORS
MODEL 250R-3-1, 13F142, ZGR01, TR10K
The 250R-3-1 is a 250Ω 3-watt 1% resistor used to convert
a 4-20 mA si gnal to a 1-5 volt signal and is perfect for use in
areas with limited access.
The ZG-R01 is a 500Ω, 1/2-watt, 1.2% resistor used to convert
a 4-20mA signal to a 2-10V signal.
250R-3-1
TR-10K
TEMPERATURE
The TR-10K is a 10,000Ω, 1/4-watt, 0.1% resistor with alligator
clips for static testing of Type 3 or 24 thermistors at 77°F.
WALL SENSOR ENCLOSURE
MODEL WMB
The WMB is a vented, plastic wall enclosure. A raw sensor can
be snapped directly in contact with the aluminum faceplate. The
WMB can be mounted directly to sheet rock block walls using
the screws provided.
WMB-1
WMB-2
WMB-3
WMB-4
20
NON-CFC FREEZE SPRAY
MODEL ES-1051
The ES-1051 is ideal for quick point-to-point sensor wiring
verification and freezestat operability. Freeze each sensor in
order, check the trend printout, and rework the terminations as
needed. Each unit contains 8 fl oz (235 mL).
ES-1051
March 2014
WE MAKE IT EASY.
kele.com
888-397-5353 USA
1299