LB-001 + LB-001-PS
This unique piece of electronics will allow local switching of led indication and pop/noise free muting of
microphones when used in conjunction with Clockaudio logic controlled touch switches. In addition the LB-001
includes an onboard dip switch to allow for any contingencies for the switching of the microphone. These include
2 x latching modes muted or unmuted and 2 x momentary switching modes.
Connections:
Tini Q Mic output
Pin 1 Phase -, Pin 2 Phase +, Pin 3 ground
Tini Q Mic Input
Pin 1 Phase -, Pin 2 Phase +, Pin 3 ground
Phoenix 8 pin connector.
Connections:
Pin 1 Not used
Pin 2 LED green touch switch
Pin 3 Switch logic touch switch
Pin 4 + 12V dc touch switch
Pin 5 –VE touch switch
Pin 6 LED Red touch switch
Pin 7 –VE from 12VDC adaptor
Pin 8 +VE from 12VDC adaptor
Specifications:











Dip switch settings: Remove 4 screws securing the top
cover assembly and remove the cover
3 programmable settings via internal dip
switch: Momentary PTT or PTM and Latching
modes.
Blue led power indicator.
Red / Green microphone status leds.
Standard Tini Q microphone Input / Output
connectors (Tini Q connectors supplied with
0.5 Metre cable to bare end)
Touch switch module connection via Phoenix
blocks (no tools required).
Dimensions W138mm H32mm D74mm.
Requires 12 VDC Regulated power adaptor
(supplied with LB-001-PS only or available
separately model no. PS-012).
Default setting momentary push to mute.
Weight 0.2Kgs.
Satin Black finish.
Fixing screws supplied.
Latching modes
ON
ON
1 2
1 2
Initially OFF
Initially ON
Momentary modes
ON
ON
1 2
1 2
Push to Talk (PTT)
www.clockaudio.com
Push to Mute (PTM)