AWNING
22
PIVOT SHOE
OPERATOR
Designed for face-mount applications
on single vent awning windows, this
operator’s unique pivot shoe design
allows approximately 10" of opening.
The double arm design also helps
achieve corner pull-in and sash stability
of ventilator. Acetal pivot shoes slide
smoothly in the track assuring positive
operation and creating a self-cleaning
action. Available in both front-mount
and rear-mount styles. Also incorporating an adjustable stabilizing tab
(optional), which helps reduce flexing
of window frame during operation.
LOGO OPTIONS: Have you
considered personalizing your window
with your company name or logo? All
of Truth’s operator handles are capable
of accepting your own “signature”.
Contact Truth for further details.
WARRANTY: Protected under the
terms of the Truth Warranty for Window
and Door Manufacturers and Authorized
Distributors. Refer to Truth’s Terms
and Conditions for further details.
MATERIAL: High-pressure die-cast
zinc case, crank handle and knob.
Hardened steel worm and gear arm.
Acetal pivot shoe. Non-magnetic
stainless steel track. Optional stainless
steel arms.
CORROSION PROTECTION:
Truth’s E-Gard® Hardware has a multistage coating process that produces a
superior physical and aesthetic finish.
Plus, it is resistant to a wider range of
corrosive materials, including industrial
cleaning materials and environmental
pollutants. This proprietary process has
been tested to be approximately three
times better than common zinc plated
finishes.
For the severe conditions associated
with coastal areas, Truth has stainless
steel hardware. See Tech Note #7 for
further information about corrosion
protection and these special hardware
options.
FINISH: Electrostatically applied,
durable coatings that provide excellent
resistance to chipping, scratching and
corrosion while maintaining color
stability for years in direct sunlight.
Please refer to Truth’s Color Chart for
examples of Truth’s most popular finish
options. Truth also offers a wide range
of decorative “plated” finishes - contact
Truth for additional information on
availability of these finishes on specific
product lines.
ORDERING INFORMATION &
OPTIONS:
1. Choose Operator style desired specify by part number. See table
within drawings for details.
2. Specify finish number.
3. Select mounting hardware (sold
separately):
#11454 - Contour Handle (painted) or
#10579 - Roto Gear Operator Handle shown above (painted).
Optional handle styles, such as Truth’s
Folding Handle, are also available.
Order Track separately - specify by
part number. See table within
drawings for details (2 per operator).
#12789 - Stabilizing Tab Kit.
#20947 - Backing Plate (2 per operator).
#20189 - Backing Grommet (optional).
#21306 - Protective red plastic spline
cap (optional).
#30171 - Rubber-cork adhesive backed
gasket (optional).
RECOMMENDED SCREWS:
Types of screws required determined
by material of profile used. Refer to
drawings for complete information on
screw type and quantity needed (sold
separately). For additional information
regarding screw selection - see Truth
Tips and Tech Note #11.
TRUTH TIPS:
1. Operator mounting screws must pass
through one PVC wall and Truth
Backing Plates #20947 or one PVC wall
and one insert wall. Track mounting
screws must pass through two PVC walls
or one PVC wall and one insert wall. For
this reason, it is necessary to use a longer
screw than is recommended.
2. When selecting mounting screws for
Truth hardware, coating compatibility is
one of the most important criteria. For
best corrosion resistance the coating on
the screws should be the same as the
coating on the hardware. For more
information see Tech Note #11.
3. This operator is intended for single
vent applications only, and should not
be used on multi-vent applications.
4. For accurate hardware replacement,
pre-drilling is recommended.
5. Truth recommends that Backing
Plates (#20947) and/or a Stability Tab
(#12789) be used for added support to
the operator in an effort to reduce the
amount of flex experienced in many
PVC Profile Systems.
6. For metal window profiles, Truth
recommends machine screws.
However, in most applications, sheet
metal screws will provide adequate
holding power.
7. Butt Hinges can be used with the
pivot shoe operator, however, some
degree of sash chatter will usually
occur. Chatter is caused by the weight
of the window pushing the operator
closed rather than the operator pulling
the window closed.
8. A window operator alone provides
poor forced entry resistance and must
always be used in conjunction with
sash locks when forced entry resistance
is required.
9. The Pivot Shoe Operator can be used
with all Truth 13 Series Awning and
4-Bar Hinges. To insure maximum
operator efficiency, it is important that
operator, hinge, and sash height is
properly matched. Consult sash size
table found in the Hinge section of the
catalog.
INCLUDE TRUTH SPECS ON
YOUR NEXT WINDOW PROJECT
Window operators shall be provided
which allow easy adjustment of window
position. The mechanism should be
crank operated and provide wide range
of open positions. Connection to the
movable sash should use pivoting slide
shoes and stainless steel guide tracks.
40
22
Window operators will be of twin push
arm design driven by hand crank. The
operator must be constructed of
E-Gard® components, hardened steel
PIVOT SHOE
OPERATOR
worm and gear arms and high pressure
zinc alloy die castings. Stainless steel
shoe guide tracks.
Window Operators shall be 22 series
Pivot Shoe Operator as manufactured
by Truth Hardware, Owatonna, MN.
FIG. 1 APPLICATION OF 22 SERIES PIVOT SHOE OPERATOR
A
.438
[11.12 mm]
B
TRACK
SASH
.438
[11.12 mm]
TAPPED #8-32
(.218 MIN. SCREW
ENGAGEMENT)
20947 BACKING PLATE (2)
(20189 BACKING GROMMET
CAN ALSO BE USED)
REAR MOUNT
SEE FIG. 3
7.750
[196.85 mm]
.688 TRACK
[17.48 mm]
1.312 MINIMUM
[33.33 mm]
.344
[8.74 mm]
.315
[8.00 mm]
.155 TRACK
[3.94 mm]
FRONT MOUNT
SEE FIG. 2
.780
[19.81 mm]
C-SINK FOR
#10 SCREW
SASH
.479
[12.17 mm]
FRAME
OPERATOR MOUNT HOLES
TO TRACK MOUNT SURFACE
INNER WALL, SEE NOTE
OPTIONAL
STABILIZING TAB
OUTER WALL
HARDWARE SHOWN
22.10
30169
10579
20947
NOTE:
INNER WALL MAY BE RELIEVED TO ALLOW SUFFICIENT ARM CLEARANCE IN
THE CLOSED POSITION. RELIEF REQUIRED FOR CLEARANCE WILL VARY
DEPENDING ON THE TRACK MOUNTING POSITION RELATIVE TO THE OPERATOR.
40a
OPERATOR
PART No.
ARM
LENGTH
OVERALL
LENGTH A
22.10
11.00
(279.4mm)
27.75
(704.9mm)
22.17
5.50
(139.7mm)
16.75
(425.5mm)
22.18
9.00
(228.6mm)
25.75
(654.1mm)
22.19
11.00
(279.4mm)
27.75
(704.9mm)
MOUNTING
STYLE
FRONT
REAR
STABILIZING
TAB TO ORDER
PART No.
12789
RECOMMENDED TRACK
TRACK
LENGTH
OPERATOR
TRACK (2)
HANDLE
BACKING PLATE (2)
B
30169
13.00
(330.2mm)
31594
7.50
(190.5mm)
31322
12.00
(304.8mm)
30169
13.00
(330.2mm)
FRAME
B
22
PIVOT SHOE
OPERATOR
FIG. 2 FRONT MOUNT CUT OUT DETAILS
2.750
[69.9 mm]
2.750
[69.9 mm]
4X PILOT FOR #10 SCREWS
OR .25DIA HOLES FOR
(P/N 20189) GROMMETS
.110
[2.8 mm]
FROM CL
OF MOUNTING
HOLES TO CL
OF SLOT
.344
[8.7 mm]
.625
[15.9 mm]
PILOT FOR A
#8 SCREW
3.063
[77.8 mm]
3.500
[88.9 mm]
3.063
[77.8 mm]
3.500
[88.9 mm]
STABILIZING TAB
RECOMMENDED SCREWS:
(AVAILABLE WITH OR WITHOUT STABILIZING TAB)
.625
[15.88 mm]
.250
[6.35 mm]
OPERATORS:
FRONT MOUNT: 4 (P/N 19700.XX) #10-24 X .688 PHILLIPS, FLAT HEAD, STEEL SHEET METAL SCREWS
1 STABILIZING TAB UNIT PACK (P/N 12789)
1 (P/N 19215.92) #8 X .750 PHILLPS, PAN HEAD, STEEL, SHEET METAL SCREW (STABILITY TAB)
NOTE: SCREW LENGTH AND THREAD TYPE WILL BE DETERMINED BY PROFILE.
FIG. 3 REAR MOUNT CUT OUT DETAILS
2.750
[69.9 mm]
2X Ø.296
[7.5 mm]
2.750
[69.9 mm]
.110
[2.8 mm]
FROM CL
OF MOUNTING
HOLES TO CL
OF SLOT
.344
[8.7 mm]
.625
[15.9 mm]
PILOT FOR A
#8 SCREW
3.500
[88.9 mm]
3.500
[88.9 mm]
.625
[15.9 mm]
STABILIZING TAB
RECOMMENDED SCREWS:
(AVAILABLE WITH OR WITHOUT STABILIZING TAB)
.250
[6.4 mm]
OPERATORS:
REAR MOUNT: 2 (P/N 19535.XX) #8-32 X .312 PHILLIPS, TRUSS HEAD, STEEL, MACHINE SCREWS
1 STABILIZING TAB UNIT PACK (P/N 12789)
1 (P/N 19215.92) #8 X .750 PHILLPS, PAN HEAD, STEEL, SHEET METAL SCREW (STABILITY TAB)
NOTE: SCREW LENGTH AND THREAD TYPE WILL BE DETERMINED BY PROFILE.
40b
22
PIVOT SHOE
OPERATOR
FIG. 4 GASKET 30171
7.750
(196.9mm)
.750
(19.1mm)
7.0
(177.8mm)
.031
(.8mm)
FIG.FIG.
5 5BACKING
PLATE
20947.XX
BACKING PLATE
20947.XX
.437
(11.1mm)
2X .190
(4.8mm)
2X Ø.172
(4.4mm)
.500
(12.7mm)
.190
(4.8mm)
NOTES:
BACKING PLATE IS DESIGNED FOR #8 SCREW TO
PASS THROUGH FOR REAR MOUNT APPLICATIONS
AND FOR A #10 SCREW TO TAP INTO IT FOR A FRONT
MOUNT APPLICATIONS.
FIG.FIG.
6 6BACKING
GROMMET
BACKING GROMMET
20189 20189
.104
(2.6mm)
FIG.
STABILIZING
FIG. 77STABILIZING
TAB 12789TAB 12789
.500
[12.70 mm]
.156
[3.97 mm]
.930
[23.62 mm]
.110
[2.79 mm]
90°
.250
[6.35 mm]
Ø.260
[6.60 mm]
.560
[14.22 mm]
1.120
[28.45 mm]
2X .418
[10.62 mm]
HOLE FOR #8
PAN HEAD SCREW
#10-24 NC
Ø.359
[9.12 mm]
NOTE:
INCLUDES TWO SCREWS FOR ATTACHMENT
TO OPERATOR.
40c
700 WEST BRIDGE ST REET, OWATONNA , MN 55060
■
507.451.5620 800.866.7884
■
TRUTH . COM