Punches, Drill Bits and Tool Sets GENERAL PURPOSE DRILL BITS AND DRILL BIT SETS ELECTRONIC CONNECTOR PANEL PUNCHES Features: A .787 1.127 1.655 2.296 2.201 9 15 25 37 50 • High speed steel •Industrial quality •Black ferous oxide finish cases •Straight shanks (except for 5876-34156 which has 3/8" reduced shanks) Drill Bits B MOUSER STOCK NO. For quantities greater than listed, call for quote. No. of Pins Drill Bit Set Features: C and ball bearing drive nut (in a plastic carrying case) 586-0229 586-0231 586-0232 586-0234 586-0238 • Sizes for PC board applications • High speed steel • Straight shank A •Drill only one 7/16" pilot hole • Use wrench or hydraulic drive methods • Capacity 22-16 gauge mild steel • Universal size for front or back mount of connectors • 5 piece assembly: Punch, die, draw stud, square nut, MOUSER STOCK NO. Drill Bit Features: Dimensions: in. B .982 1.309 1.853 2.497 2.402 Price Each C .469 .469 .469 .469 .579 517.51 517.51 509.86 550.44 544.97 Drill No. 52 55 60 66 69 80 5876-409-52 5876-409-55 5876-409-60 5876-409-66 5876-409-69 5876-409-80 Drill Size Hole Size (in.) .0635 .0520 .0400 .0330 .0292 .0135 Drill Bit Sets MOUSER STOCK NO 5876-34156 5876-34181 5876-34201 5876-34241 STANDARD METAL KNOCKOUT PUNCHES Operate manually using wrench to turn the threaded draw stud into the mating threads of the punch. This draws the punch into the die, shearing a hole in the material being punched. Can also be operated with ratchet or hydraulic punch drivers. For quantities greater than listed, call for quote. MOUSER STOCK NO. 586-3801 586-3802 586-3803 586-3804 586-3805 586-3806 586-3807 586-3808 586-3809 586-3810 586-3811 586-3814 586-3815 586-3816 586-3817 586-3818 586-3819 586-3821 586-3822 586-3823 586-3824 Hole Size (in.) 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-5/8 1-3/4 2 2-1/8 2-1/4 2-1/2 Capacity (Gauge) Price Each 16 16 16 14 14 14 10 14 14 16 14 16 16 16 16 10 10 10 10 10 10 44.12 40.80 42.04 42.05 40.10 42.05 38.03 43.83 47.82 46.62 49.11 72.05 46.62 64.54 74.43 82.90 91.35 109.00 112.48 126.48 176.77 For quantities greater than listed, call for quote. Hole Size (in.) .5 1 MOUSER STOCK NO. 586-3827 586-3831 "D" Capacity (Gauge) Price Each 14 14 202.96 264.16 A B A Dimensions: Capacity in. (Gauge) A B "D" (Formerly 733 Series) 586-3837 .469 .50 14 586-3838 .594 .625 14 586-3839 .703 .75 14 Double "D" (Formerly 734 Series) 586-3870 .769 .642 14 586-3873 .913 .795 14 MOUSER STOCK NO. MOUSER STOCK NO 5876-41095 Price Each 10 20 1.04 .99 1.49 1.41 1.38 1.31 2.33 2.21 3.05 2.90 2.39 2.27 50 .97 1.34 1.24 2.10 2.75 2.22 Price Each 15 piece set: No. 1/16" - 1/2" in 1/32" increments,3/8" reduced shanks 64.67 21 piece set: No. 1/16" - 3/8" in 1/64" increments 45.83 29 piece set: 1/16" - 1/2" in 1/64" increments 96.70 60 piece set: No. 1-60 (.2280" - .0400") 75.16 #4-1/2" NC and NF sizes For quantities greater than listed, call for quote. Price Each Carbon steel plug taps with 1" round screw adjusting dies for 17 most 178.09 common thread sizes. Includes die stock, tap wrench, (2) T-handle tap wrenches, screw pitch gauge, and molded case. Description 13 Piece Threading Set Double "D" B MOUSER STOCK NO 5876-44332 1 1.10 1.56 1.45 2.45 3.21 2.52 For quantities greater than listed, call for quote. 39 Piece Super Tap and Die Set Square (Formerly 731 Series) Type 730 (Round) Length (in.) 1 7/8 1 7/8 1 5/8 1 3/8 1 3/8 3/4 Description TOOL SETS Use to punch holes for switches and instruments in enclosures • Accurate alignment • Burr-free holes • Punch up to 14 gauge mild steel For quantities greater than listed, call for quote. For quantities greater than listed, call for quote. Description Packed in an attractive vinyl display pouch. Contents: 6 wire gauge 135° split point screw machine length HSS drill bits, no.’s 43, 35, 29, 25, 21, and 7; 6 plug taps, 4-40NC, 6-32NC, 8-32NC, 10-24NF, and 1/4-20NC plus tap wrench Price Each 20.97 Price Each 194.04 213.44 221.85 232.32 295.61 T-Handle Reamer MOUSER STOCK NO 5876-44268 For quantities greater than listed, call for quote. Description Hardened and ground steel reamer for removing burrs or enlargingholes in sheet, plastics and similar material. Enlarges holes 1/8" to 1/2" Price Each 9.92 SPEEDY BEND LEAD FORMERS Bench Top Tools Features: •Watt size indicates approximate package size • Centers components on accurate lead spacing • Each lead former is graduated in .05" increments • Lead Spacing: 1/4W: 4-1.5" 1/2W: 5-1.5" 1W: 8-1.4" 2W: 9-1.9" For quantities greater than listed, call for quote. 5166-801 5166-901 MOUSER STOCK NO. © Copyright 2012 Mouser Electronics 2278 Price Each 1 5 5.05 4.80 5.05 4.80 Description (Approximate Size) 1/4 Watt, 1/2 Watt 1 Watt, 2 Watt mouser.com (800) 346-6873 © Copyright 2012 Mouser Electronics