NOTE: THESE DRAWINGS & SPECIFICATIONS ARE INTENDED FOR GENERAL PRUPOSES ONLY. GREAT PLAINS TOWERS RESERVES THE RIGHT TO CHANGE MATERIAL OR DESIGN, WITHOUT PRIOR NOTICE, IN A CONTINUING EFFORT TO IMPROVE ITS PRODUCTS. 4 11 4 ~ 2 1 MATERIAL LIST ITEM QTY DESCRIPTION 1 2 2 10 3 1 SUB FLOOR 4 4 2" x 3" ANGLE IRON FLOOR SUPPORTS 5 4 Ø1-1/8" HOLES (HINGED POLE HOLE PATTERN) 6 1 Ø5" HOLE 7 1 SUB BASE PLATE 8 4 PAD EYES FOR LIFTING EMPTY BALLAST TRAY 9 10 Ø3/4" A325 BOLT W/NUT & LOCK WASHERS 10 4 Ø1" x 12" A325 THREADED ROD W/NUTS 11 3 1" x 1/8" BAR GRATING FOR TOP (NOT SHOWN FOR CLARITY) Ø3" HOLE W/KNOCK OUTS FOR PVC PIPE CABLE ROUTING Ø13/16" BOLT HOLES 2,450 LB EMPTY WEIGHT SUGGESTED BALLAST MATERIAL WEIGHT: 30' POLE - 1 CU YDS GRAVEL OR 3,000 LBS OF WT OR .75 CU YDS REDI MIX 40' POLE - 2 CU YDS GRAVEL OR 6,000 LBS OF WT OR 1.5 CU YDS REDI MIX 50' POLE - 3 CU YDS GRAVEL OR 9,000 LBS OF WT OR 2.5 CU YDS REDI MIX 60' POLE - 4 CU YDS GRAVEL OR 12,000 LBS OF WT OR 3.0 CU YDS REDI MIX 4 CU YD MAX CAPACITY VOLUME 4 4 PLAN VIEW RIGHT SIDE VIEW 1 8 8 16" FRONT VIEW 6 5 SUB BASE PLATE 2 List Update Authorization here. Approved By: Great Plains Towers DD/MM/YY Drawn: J.Heer 2/20/15 Checked: 126 6th Street West West Fargo, ND USA 58078 Phone: 701-282-2236 Ballast Tray Assembly Kit Revision 1 Revision 2: Revision 3: Scale: N/A Part #: GPT/BT/01 Sheet [1] of [1]