NEW!
LIGHTING CONTROLS
SENSOR SWITCH PIR AND PDT CEILING MOUNT OCCUPANCY SENSORS
CM SERIES
DESCRIPTION
The CM Series occupancy sensor offers amazing
peformance and sensitivity to small motions. There are
variety of model options to fit the applcation needs. The CM
9 models offers standard range PIR sensor for smaller rooms
and the CM 10 models provide extended range for larger
spaces. The CM PDT models offers dual technolgoy PIR with
Microphonics for excellent detection. The CMR line voltage
models are economical solution for automatic lighting control
with no power pack needed. The CM series is light weight
and ceiling mounted with 360 degree coverage pattern.
FEATURES
•
•
•
•
•
•
•
100% digital PIR detection with excellent RF immunity
Push-button programmable
User adjustable time delays (30 sec to 20 min)
No field calibration or sensitivity adjustments required
Convenient test mode
100 hr lamp burn-in timer
Green LED indicator
CM9
SPECIFICATIONS
Supply Voltage
CM
CMR
360°
Passive Infrared (PIR)
Dual Technology
(PIR and Microphonics)
Operating Temperature14 to 160°F (-10 to 71°C)
Operating Humidity
20-90% non-condensing
Mounting
Ceiling mount
Dimensions
4.55"Ø (11.56 cm),
1.55" (3.94 cm) deep
Approvals
UL, cUL (E167435)
Weight
0.38 lb (0.17 kg)
Warranty
5 year limited
4mA, 16mA w/R option
50/60 Hz
1/4 HP
Sinks <20mA
500 sq. ft
1000 sq. ft
2000 sq. ft.
2500 sq. ft,
LIGHTING CONTROLS
Supply Current
CMx
Frequency
Motor Load
CMRx
Dimming Load
Coverage
CMx-9
CMx-PDT-9
CMx-10
CMx-PDT-10
11
Coverage Pattern
Sensor Type
CMx
CMx-PDT
12-24 VAC/VDC
800/1200/
1500 W @ 120/277/347 VAC
INSTALLATION
PUSH BUTTON
FOR TIMER PROGRAMMING
PROGRAMMING INSTRUCTIONS
1. Press button twice for function 2, occupancy time delay.
2. LED will flash back the selected function's current setting
(5 flashes for 10 minutes time delay).
3. Press button the number of times indicated in Occupancy
Time Delay table below to change.
4. To exit the current setting, wait for LED flsh dequence to
repeat 3 times then return to step 1.
March 2014
WE MAKE IT EASY.
kele.com
888-397-5353 USA
633
NEW!
LIGHTING CONTROLS
SENSOR SWITCH PIR AND PDT CEILING MOUNT OCCUPANCY SENSORS
CM SERIES
WIRING
STANDARD WIRING
- Power Input (12-24 VAC/VDC)
RED
BLACK - Common
WHITE - Occupancy State (high VDC for occupied)
PHOTOCELL/DIMMING OPTIONS
POWER PACK
RED
WHT
BLK
(-)
BLUE - Direct output to power pack for providing photocell
control and/or secondary dim time out. Output is high VDC
with occupancy & low light. Output also held high during
secondary dim time out. For multi-level control, use two
power packs and connect White wire to primary load and
Blue to daylight load.
VIOLET w/ WHITE STRIPE - Connect to 0-10 VDC control
wire (typically Violet) from 0-10 VDC dimmable ballast
GRAY from BALLAST - Connect to sensor Black wire
11
(PP20)
VIO w/ WHT STRIPE (+)
Photocell / Dimming Options
Relay Option
CM MODEL
SENSORS IN PARALLEL
Sensors may be wired in parallel; however, the
maximum load ratings stay the same. Do not wire
sensors with Photocell and dimming option in parallel.
H
HOT
BLK
BLK
BLK
BLK
BLK
BLK
WHT
WHT
N
SWITCH
LOAD
WHT
LIGHITING CONTROLS
VIO (+)
N
LOAD
GRY (-)
Dimming Options
N
CMR MODEL
ORDERING INFORMATION
MODEL
CM-10
CM-9
CM-PDT-10
CM-PDT-9
CMR-10
CMR-9
CMR-PDT-10
CMR-PDT-9
DESCRIPTION
Extended Range 360 Degree Sensor-Ceiling Mount, Low Voltage, PIR
Standard Range 360 Degree Sensor-Ceiling Mount, Low Voltage, PIR
Extended Range 360 Degree Sensor-Ceiling Mount, Low Voltage, PDT
Standard Range 360 Degree Sensor-Ceiling Mount, Low Voltage, PDT
Extended Range 360 Degree Sensor-Ceiling Mount, Line Voltage, PIR
Standard Range 360 Degree Sensor-Ceiling Mount, Line Voltage, PIR
Extended Range 360 Degree Sensor-Ceiling Mount, Line Voltage, PDT
Standard Range 360 Degree Sensor-Ceiling Mount, Line Voltage, PDT
Note: Call Kele for models with low voltage relay, photocell, dimming, and low temperature
options availabilty.
PP20
634
888-397-5353 USA
RELATED PRODUCTS
Power Pack, 120/277 VAC
kele.com
WHEN YOU NEED IT RIGHT, RIGHT NOW, CALL KELE.
March 2014