00 SERIES (NIM-CAMAC) ® www.lemo.com ® 5 ® ® 00 Series (NIM-CAMAC CD/N 549) The 00 series is a range of 50 Ω coaxial connectors. They are suitable for a wide variety of applications particularly in measurement, control system and nuclear physics, having formed the basis for the NIM-CAMAC CD/N 549 standard. LEMO 00 connectors offer customers many benefits including: – Self-latching push-pull system – Aesthetically pleasing appearance – Small size – High packing density – Rugged construction – Ease of use – Low weight – Reliable performances – Wide choice to suit application Metal housing models (page 8) Fixed plugs Straight plugs Fixed sockets Elbow sockets FAA FFA ERA, ERE EPL, EPM, EPK, EPR FAN FFA ERN FAB FFA ERC FPA FFC ERT FPL FFC ERX Free sockets Fixed coupler PCA RAD Free coupler PCS RMA EPS Straight and elbow plugs with socket Fixed sockets EPN PSA EPY FTR PSS Plugs with resistor Elbow plugs FFY PES ECP FTA FRT FLC FFE EHP PFS FLS.NTAE FFF FLS, FLV FFS FLR ELF FTL PLK EPA, EPB, EPC Socket with microswitch FTY EPE ERM Plastic housing models* (page 21) Threaded latching Models* (page 26) Adaptors Straight plug Fixed socket Straight plug (See page 27) FFA ERN FVS Watertight or vacuumtight models (page 22) Straight sockets HGP Straight coupler HEP HGW EWF EWV VPS SWH Metal housing models with mechanical keying* (page 24) Straight plug Elbow sockets FSG XBG Fixed sockets XRG XSG EXG ESG PSG * not included in NIM-CAMAC standard 6 www.lemo.com ® ® Part Numbering System Plug FFA . 00 . 250 . N T A C 29 Free socket PCA . 00 . 250 . N T L C 29 Variant: (page 30) Cable ø Collet type: C = with cable collet clamping E = with cable crimping K, D = with oversize cable collet Fixed socket ERA . 00 . 250 . N T Contact type : A = male solder C = male crimp L = female solder M = female crimp L Variant: (page 30) Fixed coupler RAD . 00 . 250 . N Contact type : A = male solder D = male print L = female solder N = female print T M Model: (page 8) Variant: (page 30) Series: 00 Contact type : A = male-female E = male-male-female 3) F = female-female-male L = female-male M = female-female Insert configuration : 250 = coaxial ( 50 Ω ) Housing : N = brass nickel-plated 4) C = brass chrome-plated 4) 1) D = brass gold-plated 5) K = brass black chrome 1) G = PEEK 2) Insulator: T = PTFE L = PEEK 5) Note: 1) 2) 3) 4) 5) Part Number Example treatment not available for the printed circuit models available for the FFA and ERN model only used only for models: FTA, FTL and FTY. standard non-standard, on request only FFA.00.250.NTAC29 = straight plug with cable collet, series 00, coaxial type (50 Ω), outer shell in nickel-plated brass, PTFE insulator, male solder contact, C type collet of 2.9 mm diameter. Part Section Showing Internal Components 1 2 3 4 3 4 5 Fixed socket outer shell earthing crown retaining ring hexagonal nut 5 6 7 7 6 www.lemo.com 2 1 1 locking washer insulator female contact 1 2 3 4 7 6 2 5 4 8 3 Plug with cable clamping 5 rear insulator outer shell 6 insulator latch sleeve 7 male contact collet nut earthing sleeve 8 collet 1 6 5 4 2 3 7 Plug with cable crimping outer shell 5 insulator 6 male contact 2 latch sleeve 3 crimp backnut 7 crimp ferrule 4 rear insulator 1 7 ® ® Metal housing models Technical Characteristics Mechanical and climatical Characteristics Electrical Value Standard Test Characteristics Impedance Operating voltage (50 Hz) Test voltage (50 Hz) Rated current Contact resistance Shell electrical continuity Insulating resistance VSWR Shielding efficiency Contact retention force Cable pull off force 1) Connector pull off force > 18 N > 100 N > 90 N IEC 60512-8 IEC 60512-9 IEC 60512-8 15a 17c 15f Endurance > 5000 cycles IEC 60512-5 9a - 55°C + 260°C Operating temperature Note : 1) depending on cable design Value Standard Test 50 Ω – 0.7 kV rms – 2.1 kV rms IEC 60512-2 4A IEC 60512-3 < 6 mΩ IEC 60512-2 < 3.5 mΩ IEC 60512-2 > 1012 Ω IEC 60512-2 see chart N°1 below see chart N°2 below 4a 5a 2a 2f 3a Voltage Standing Wave Ratio The VSWR (Voltage Standing Wave Ratio) is the value representing the power reflected in a connection. The VSWR varies with frequency, in most cases, the working frequency range is where VSWR is ≤ 1.25. 1 Shielding efficiency (EMC properties) in dB (transfer impedance in dBohm) The shielding efficiency is the ratio between the electromagnetic field inside the connector and a power source at the outside of the connector (or vice versa). VSWR 2 1.3 75 Ω 50Ω 1.2 (dBΩ) -10 (dB) 60 -20 80 -30 100 1.1 -40 0.01 0.1 1 10 120 1000 f (MHz) 100 1.0 500 1000 FFA + PCA 1500 f FFS + PCS FFV + PCS FFS + PCS Note : value for connectors with PTFE insulator. VSWR measured 50 Ω with a RG-174 A/U cable and 75 Ω with a RG-179 B/U cable. Measured according to IEC-60169-1-1. Note : measured according to IEC-60169-1-3 standard. FFA Straight plug with cable collet Part number FFA.00.250.NTAC15 FFA.00.250.NTAC17 FFA.00.250.NTAC22 FFA.00.250.NTAC27 FFA.00.250.NTAC31 ~26 ø 6.4 ~18 M1 Cable group Cond. Ø max. Dielectric Ø max. 9 – 1 2-3-4 8 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 Sheath Ø min. max. 1.1 1.3 1.8 2.3 2.8 1.4 1.7 2.2 2.7 3.0 Cable assembly, solder contact (page 39) S 4.5 8 www.lemo.com ® ® FFA Straight plug with oversize cable collet Part number FFA.00.250.NTAK37 FFA.00.250.NTAK42 ~ 36.5 ø8 ø 6.4 ~ 28.5 S 6.5 M1 Cable group Cond. Ø max Dielectric Ø maxi 8 – 0.55 0.55 1.95 1.95 Sheath Ø mini maxi 3.0 3.3 3.6 4.1 Cable assembly, solder contact (page 39) S7 FFA Straight plug with cable collet and nut for fitting a bend relief ~33.5 ø 6.4 ~25.5 Part number Cable group Cond. Ø max Dielectric Ø maxi FFA.00.250.NTAC15Z FFA.00.250.NTAC17Z FFA.00.250.NTAC22Z FFA.00.250.NTAC27Z FFA.00.250.NTAC31Z 9 – 1 2-3-4 8 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 M1 Sheath Ø mini maxi 1.1 1.3 1.7 2.3 2.8 1.4 1.7 2.1 2.7 3.0 Cable assembly, solder contact (page 39) S6 Note: the bend relief must be ordered separately (see page 30). FFC Straight plug with flats on latch sleeve and cable collet Part number FFC.00.250.CTAC22 FFC.00.250.CTAC27 FFC.00.250.CTAC31 ~26 ø 6.4 ~18 S5 M3 Cable group Cond. Ø max Dielectric Ø maxi 1 2-3-4 8 0.60 0.60 0.60 1.55 1.95 1.95 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.0 Cable assembly, solder contact (page 39) S 5.5 FFC Straight plug with flats on latch sleeve and oversize cable collet Part number FFC.00.250.CTAD42 FFC.00.250.CTAD52 FFC.00.250.CTAD56 ~34.5 ø 8.6 ø 6.4 ~26.5 S7 www.lemo.com S8 M3 Cable group Cond. Ø max Dielectric Ø maxi 5 6-7 – 1.05 1.05 1.05 3.05 3.05 3.05 Sheath Ø mini maxi 3.1 4.1 5.1 4.0 5.0 5.5 Cable assembly, solder contact (page 39) S 5.5 9 ® ® FFY Straight plug, large shell with cable collet Part number ~33 ø 8.9 ø 8.6 ~25 FFY.00.250.NTAC40 FFY.00.250.NTAC47 FFY.00.250.NTAC52 M2 S7 Cable group Cond. Ø max Dielectric Ø maxi 5 – 6-7 1.05 1.05 1.05 3.05 3.05 3.05 Sheath Ø mini maxi 3.2 3.9 4.6 3.8 4.5 5.0 Cable assembly, solder contact (page 39) S8 FFE ~33.5 ø 7.4 ~25.5 Straight plug with front sealing ring, cable collet and nut for fitting a bend relief (IP 54 protection index when mated) Part number Cable group Cond. Ø max Dielectric Ø maxi FFE.00.250.NTAC22Z FFE.00.250.NTAC27Z FFE.00.250.NTAC31Z 1 2-3-4 8 0.55 0.55 0.55 1.95 1.95 1.95 M1 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.0 Cable assembly, solder contact (page 39) S6 Note: the bend relief must be ordered separately (see page 30). FFF Straight plug, non-latching, with cable collet Part number FFF.00.250.NTAC22 FFF.00.250.NTAC27 FFF.00.250.NTAC31 ~26 ø 6.4 ~18 M1 Cable group Cond. Ø max Dielectric Ø maxi 1 2-3-4 8 0.55 0.55 0.55 1.95 1.95 1.95 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.0 Cable assembly, solder contact (page 39) S 4.5 FFS Straight plug for cable crimping Part number FFS.00.250.CTAE24 FFS.00.250.CTAE31 FFS.00.250.CTAE52 M5 Dim L M 31 31 34 23 23 26 Cable Cond. group Ø maxi 1 3-4 6 Dielec. Ø maxi Sheath Ø maxi 0.95 1.65 3.05 2.35 3.0 5.2 0.4 0.55 0.97 Cable assembly, solder contact (page 41) Part number L Dim M Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi L ø 6.4 M S 5.5 S 5.5 FFS.00.250.CTCE24 FFS.00.250.CTCE25 FFS.00.250.CTCE30 FFS.00.250.CTCE31 FFS.00.250.CTCE35 FFS.00.250.CTCE44 FFS.00.250.CTCE52 FFS.00.250.CTCE56 M4 10 31 31 31 31 31 31 34 34 23 23 23 23 23 23 26 26 1 1 2 3-4 8 5 6 7 0.28 0.28 0.28 0.46 0.46 0.28 0.90 0.90 0.4 0.4 0.4 0.55 0.55 0.4 0.97 0.97 0.95 1.15 1.65 1.65 1.65 2.65 3.05 3.05 2.35 2.35 3.0 3.0 3.35 4.35 5.2 5.45 Cable assembly, crimp contact (page 40) www.lemo.com ® ® FFV Straight plug for cable crimping with improved screen efficiency 1) Part number FFV.00.250.NTAE24 FFV.00.250.NTAE31 FFV.00.250.NTAE52 M5 L FFV.00.250.NTCE24 FFV.00.250.NTCE30 FFV.00.250.NTCE31 FFV.00.250.NTCE35 FFV.00.250.NTCE44 FFV.00.250.NTCE52 FFV.00.250.NTCE56 ø 6.4 S 5.5 S 5.5 M4 Dim M 31 31 34 Cable Cond. group Ø maxi 23 23 26 1 3-4 6 Dielec. Ø maxi Sheath Ø maxi 0.95 1.65 3.05 2.35 3.0 5.2 0.4 0.55 0.97 Cable assembly, solder contact (page 41) Part number M L L Dim M 31 31 31 31 31 34 34 Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi 23 23 23 23 23 26 26 1 2 3-4 8 5 6 7 0.28 0.28 0.46 0.46 0.28 0.90 0.90 0.4 0.4 0.55 0.55 0.4 0.97 0.97 0.95 1.65 1.65 1.65 2.65 3.05 3.05 2.35 3.0 3.0 3.35 4.35 5.2 5.45 Cable assembly, crimp contact (page 40) Note : 1) Screen efficiency >100dB at 1 GHz, see page 8. FLC Elbow plug (90°) with cable collet 17.2 Part number ø 7.5 9.2 ~16.3 FLC.00.250.CTAC22 FLC.00.250.CTAC27 FLC.00.250.CTAC31 M6 Cable group Cond. Ø max Dielectric Ø maxi 1 – – 0.35 0.35 0.35 1.55 1.75 1.75 Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.0 Cable assembly, solder contact (page 42) FLA Elbow plug (90°) with oversize cable collet 17.5 ø9 9.5 24 Part number FLA.00.250.CTAD42 FLA.00.250.NTAD52 FLA.00.250.NTAD56 S8 Cable group Cond. Ø max Dielectric Ø maxi 8 6 7 0.97 0.97 0.97 1.75 1.75 1.75 Sheath Ø mini maxi 3.1 4.1 5.1 4.0 5.0 5.5 S7 M6 Cable assembly, solder contact (page 42) ø 8.6 FLS Elbow plug (90°) for cable crimping 17.5 H 9.5 ø9 Part number FLS.00.250.NTAE31 FLS.00.250.NTAE35 FLS.00.250.NTAE52 FLS.00.250.NTAE56 M7 www.lemo.com H Cable (mm) group 15 15 18 18 – – 6 7 Cond. Ø maxi Dielectric Ø maxi Sheath Ø maxi 0.35 0.35 0.97 0.97 1.65 1.65 3.05 3.05 3.0 3.35 5.2 5.45 Cable assembly, solder contact (page 42) 11 ® ® FLV Elbow plug (90°) for cable crimping with improved screen efficiency * 17.5 Part number ø9 9.5 H FLV.00.250.NTAE31 FLV.00.250.NTAE35 FLV.00.250.NTAE52 FLV.00.250.NTAE56 M7 H Cable (mm) group 15 15 18 18 3-4 8 6 7 Cond. Ø maxi Dielectric Ø maxi Sheath Ø maxi 0.35 0.35 0.97 0.97 1.65 1.65 3.05 3.05 3.0 3.35 5.2 5.45 Cable assembly, solder contact (page 42) * Screen efficiency >100dB at 1 GHz, see page 8. FAA Straight plug, non-latching, nut fixing 15.6 13 S9 9 2 maxi ø8 ø5 M7x0.5 ø 10.2 Part number P5 S 6.3 2.5 Panel cut-out (page 38) FAN Straight plug, non-latching, nut fixing with earthing tags 15.6 13 S9 FAA.00.250.NTA Weight (g) ø5 2 maxi ø8 Part number M7x0.5 ø 10.2 9 FAN.00.250.CLA P5 S 6.3 Weight (g) 2.5 Panel cut-out (page 38) FPA Straight plug, non-latching, for printed circuit 7 5.08 14 ø1 Part number ø5 ø 0.7 (4x) 17 FPA.00.250.NTD Weight (g) 2.5 P11 PCB drilling pattern (page 38) FPL Elbow plug (90°), non-latching for printed circuit 7 ø5 5.08 Part number Weight (g) 17.5 P10 PCB drilling pattern (page 38) ø 0.7 12 2.5 7 10 FPL.00.250.NTD (5x) www.lemo.com ® ® ERA Fixed socket, nut fixing 15 1 S9 ø8 ø 10.2 M7x0.5 Part number 5.5 maxi ERA.00.250.NTL S 6.3 P5 Weight (g) 2.5 Panel cut-out (page 38) ERN Fixed socket, nut fixing, with earthing tags 15 S9 1 ø8 ø 10.2 M7x0.5 Part number 5.5 maxi ERN.00.250.NTL S 6.3 P5 Weight (g) 2.5 Panel cut-out (page 38) ERC Fixed socket, with thread, with slots in flange 1 1.6 Part number ø8 ø 10.2 M7x0.5 15 S9 ERC.00.250.NTL Weight (g) 2.6 P1 Panel cut-out (page 38) P3 Panel cut-out for use wihout hexagonal nut (page 38) 5.5 maxi ERE Fixed socket, nut fixing, with conical lead-in 15 1 S9 ø8 ø 10.2 M7x0.5 Part number 5.5 maxi S 6.3 ERE.00.250.NTL P5 Weight (g) 2.8 Panel cut-out (page 38) 15 1 Part number ø8 6.98 ±0.03 ERT Straight socket without thread, force or adhesive fit, with earthing tags ERT.00.250.NTL P4 www.lemo.com Weight (g) 2.1 Panel cut-out (page 38) 13 ® ® ERM Fixed socket, nut fixing, with microswitch 20 1 S9 ø8 ø 10.2 M7x0.5 Part number ERM.00.250.NTL Weight (g) 3.0 A 5.5 maxi S 6.3 P5 Panel cut-out (page 38) Technical characteristics on request B ERX Fixed socket, with thread, with slots in flange, with earthing tags 15 1.6 1 ø8 Part number ERX.00.250.NTL Weight (g) 2.0 P3 Panel cut-out (page 38) ECP Fixed socket with two nuts 15 2 ø9 ø9 M7x0.5 Part number ECP.00.250.NTL Weight (g) 3.3 P1 Panel cut-out (page 38) 4 maxi EHP Fixed socket, nut fixing, protruding shell S9 15 13.5 8.5 2 maxi ø8 ø 6.4 M7x0.5 ø 10.2 Part number EHP.00.250.NTL P5 S 6.3 ELF 15 10.5 S 6.3 14 2.8 Panel cut-out (page 38) Fixed socket, with slotted nut, long threaded shell, with earthing tags (back panel mounting) 2.5 1.5 mini 7.0 maxi Part number ø 10 M7x0.5 S 7.5 Weight (g) ELF.00.250.NTL P5 Weight (g) 3.1 Panel cut-out (page 38) www.lemo.com ® ® EPA-EPB Straight socket for printed circuit 7 ø 0.7 (5X) 17 5.08 L ø 6.8 Part number EPA.00.250.NTN EPB.00.250.NTN L (mm) Weight (g) 14 12 3.4 3.3 P10 PCB drilling pattern (page 38) EPC Straight socket for printed circuit with clearance under the body 7 ø 0.7 (5x) 17 5.08 14 ø 6.8 Part number EPC.00.250.NTN Weight (g) 3.3 P10 PCB drilling pattern (page 38) EPE Fixed socket with two nuts, for printed circuit 17 14 2.5 ø 10.2 ø 0.7 (5x) S9 7 3.5 maxi ø 10 M7x0.5 Part number EPE.00.250.NTN P1 5.08 Weight (g) 4.3 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) EPL Elbow socket (90°) for printed circuit 7 ø 6.8 5.08 Part number EPL.00.250.NTN 7 10 17.5 H (mm) Weight (g) 10 4.3 P10 PCB drilling pattern (page 38) ø 0.7 (5x) EPM Elbow socket (90°) for printed circuit, elevated solder tail 7 ø 6.8 5.08 Part number 17.5 13 4.6 P10 PCB drilling pattern (page 38) ø 0.7 www.lemo.com Weight (g) 7 10 13 EPM.00.250.NTN H (mm) (5x) 15 ® ® EPK Elbow socket (90°) for printed circuit with clearance under the body 7 ø 6.8 5.08 Part number 17.5 4.2 10 7 EPK.00.250.NTN Weight (g) P10 PCB drilling pattern (page 38) ø 0.7 (5x) EPS Elbow socket (90°) with two nuts, for printed circuit 7 M7x0.5 ø 10.2 2.5 5.08 Part number Weight (g) S9 EPS.00.250.NTN 5.4 17.5 10 7 ø 10 P1 ø 0.7 (5x) P12 PCB drilling pattern (page 38) 4 maxi EPR Elbow socket (90°) with two nuts for printed circuit, with clearance under the body (back panel mounting) 7 ø 10.2 M7x0.5 5.08 Part number 2.5 S9 EPR.00.250.NTN 7 ø 10 17.5 10 Panel cut-out (page 38) P1 Weight (g) 5.4 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) ø 0.7 (5x) 4 maxi EPY Elbow socket (90°) for printed circuit, with two vertical sockets 5.08 ø 6.8 2.42 Part number 21.5 10.5 17.8 14.3 EPY.00.250.NTN 12.8 P13 PCB drilling pattern (page 38) 3.9 7.5 8 Weight (g) ø 0.7 16 (6x) www.lemo.com ® ® EPN Straight socket for press mounting in pair on printed circuit Part number EPN.00.250.NTN 0.8 Weight (g) 3.6 5.08 ø 1.5 P9 PCB drilling pattern (page 38) 14 7 10.7 8.7 maxi 8.3 mini ø6 3.5 1.7 maxi 1.3 mini ø 0.9 (2x) 2 PCA Free socket with cable collet ø 6.5 ~25 Part number Cable group Cond. Ø max Dielectric Ø maxi PCA.00.250.NTLC15 PCA.00.250.NTLC22 PCA.00.250.NTLC27 PCA.00.250.NTLC31 9 1 2-3-4 8 0.55 0.55 0.55 0.55 1.45 1.95 1.95 1.95 M1 Sheath Ø mini maxi 1.1 1.7 2.3 2.8 1.4 2.1 2.7 3.0 Cable assembly (page 39) S 4.5 PCS Free socket for cable crimping ø 6.5 L S 5.5 Part number Dim L Cable group PCS.00.250.NTME24 PCS.00.250.NTME30 PCS.00.250.NTME31 PCS.00.250.NTME44 PCS.00.250.NTME52 30 30 30 30 33 1 2 3-4 5 6 M4 S 5.5 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.28 0.4 0.46 0.55 0.28 0.4 0.90 0.97 0.95 1.65 1.65 2.65 3.05 2.35 3.0 3.0 4.35 5.2 Cable assembly, crimp contact (page 40) PSA Fixed socket, nut fixing, with cable collet ~25 Part number S 4.5 www.lemo.com M7x0.5 ø8 1 5.5 maxi S 6.3 ø 10.2 S9 PSA.00.250.NTLC22 PSA.00.250.NTLC27 PSA.00.250.NTLC31 Cable group Cond. Ø max Dielectric Ø maxi 1 2-3-4 8 0.55 0.55 0.55 1.95 1.95 1.95 M1 Cable assembly (page 39) P5 Panel cut-out (page 38) Sheath Ø mini maxi 1.7 2.3 2.8 2.1 2.7 3.0 17 ® ® PSS Fixed socket, nut fixing, for cable crimping Part number Dim L Cable group PSS.00.250.NTME24 PSS.00.250.NTME30 PSS.00.250.NTME31 PSS.00.250.NTME35 PSS.00.250.NTME52 30 30 30 30 33 1 2 3-4 8 6 L S9 S 5.5 M7x0.5 5.5 maxi ø 10.2 ø8 1 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.28 0.4 0.46 0.55 0.46 0.55 0.90 0.97 0.95 1.65 1.65 1.65 3.05 2.35 3.0 3.0 3.35 5.2 S 6.3 M4 Cable assembly, crimp contact (page 40) P5 Panel cut-out (page 38) PES Fixed socket, nut fixing, for cable crimping (back panel mounting) 30 2.5 S 5.5 ø 10 M7x0.5 S 6.3 2.5 maxi Part number Cable group PES.00.250.NTME24 PES.00.250.NTME30 PES.00.250.NTME31 PES.00.250.NTME35 1 2 3-4 8 Cond. Ø Dielectric Ø Sheath Ø mini maxi maxi maxi 0.28 0.4 0.28 0.4 0.46 0.55 0.46 0.55 M4 Cable assembly, crimp contact (page 40) P5 Panel cut-out (page 38) 0.95 1.65 1.65 1.65 2.35 3.0 3.0 3.35 PFS Fixed socket, with two nuts, for cable crimping (back panel mounting) L S9 S 5.5 M7x0.5 ø 10.2 ø 10 2.5 Part number Dim L Cable group PFS.00.250.NTME24 PFS.00.250.NTME31 PFS.00.250.NTME52 30 30 33 1 3-4 6 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.46 0.55 0.90 0.95 0.95 1.65 3.05 2.35 3.0 5.2 S 6.3 P5 5.5 maxi Panel cut-out (page 38) Cable assembly, please contact customer services PLK Fixed elbow socket (90°), for cable crimping (back panel mounting) 18.5 2.5 2.5 maxi S6 Part number ø 10 15.5 M7x0.5 S 6.3 PLK.00.250.NTLE31 PLK.00.250.NTLE35 P5 Cable group 3-4 8 Cond. Ø Dielectric Ø Sheath Ø mini maxi maxi maxi 0.46 0.55 0.46 0.55 1.65 1.65 3.0 3.35 Panel cut-out (page 38) Cable assembly, please contact customer services 18 www.lemo.com ® ® FRT Straight plug with resistor 29 21 ø 6.4 Part number FRT.00.250.NTA00 FRT.00.250.NTA50 FRT.00.250.NTA100 Resistor Weight (g) shorted 50 Ω 0.6W 100 Ω 0.4W 4.4 4.4 4.4 Note S 5.5 Note: Standard, first choice alternative Non standard, on request only FLR Elbow plug (90°) with resistor 17.5 ø9 9.5 18.8 Part number FLR.00.250.NTA50 Resistor Weight (g) 50 Ω 0.6 W 5.6 RAD Fixed coupler, nut fixing 22 S9 1 M7x0.5 ø 10.2 ø8 Part number RAD.00.250.NTM P5 5.5 maxi S 6.3 Weight (g) 3.8 Panel cut-out (page 38) Note: the first contact type mentioned (page 7) is always the contact at the flange end. RMA Free coupler ø 6.4 22 Part number RMA.00.250.NTM Weight (g) 2.7 FTR Elbow plug (90°) with socket 18.5 17.5 9.5 9 Part number FTR.00.250.NTA www.lemo.com Weight (g) 5.4 19 ® ® FTA T-plug with two sockets in line Part number 30 FTA.00.250.NTF 7.8 17.5 9.5 ø9 Weight (g) FTL T-plug with two sockets (90°) Part number 28 ø9 FTL.00.250.NTF Weight (g) 7.1 18.5 20 FTY Straight plug with two parallel sockets Part number 29.5 20 21.5 FTY.00.250.NTF 12.5 ø 16 7 7 Weight (g) www.lemo.com ® ® Plastic housing models This plastic housing provides the ideal solution when the isolation of the connector is critical (non metallic). The FFA and ERN models in PEEK allow weight saving and can provide ease of use in applications such as medical electronic instrumentation. Technical Characteristics Mechanical and climatical Characteristics Value Standard Test Contact retention force Cable pull off force Connector pull off force > 18 N > 100 N > 90 N IEC 60512-8 IEC 60512-9 15a 17a Endurance > 5000 cycles IEC 60512-5 9a - 50°C + 250°C Operating temperature FFA Straight plug with cable collet, PEEK outer shell Part number FFA.00.250.GTAC15 FFA.00.250.GTAC17 FFA.00.250.GTAC22 FFA.00.250.GTAC27 .FFA.00.250.GTAC31 ~33.5 ø7 ~25.5 M1 S6 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 1.1 1.3 1.7 2.3 2.8 1.4 1.7 2.1 2.7 3.0 Cable assembly (page 39) Part number ø9 M7x0.5 ø 10.2 1 ERN.00.250.GTL 5.5 maxi 9 – 1 2-3-4 8 ERN Fixed socket, nut fixing, with earthing tags, PEEK outer shell 15 S9 Cable Cond. Dielectric Ø Sheath Ø group Ø max maxi mini maxi S 6.3 Weight (g) 1.4 P5 Panel cut-out (page 38) PCA Free socket with cable collet, PEEK outer shell Part number ø7 ~32.5 S6 www.lemo.com PCA.00.250.GTLC15 PCA.00.250.GTLC17 PCA.00.250.GTLC22 PCA.00.250.GTLC27 PCA.00.250.GTLC31 M1 Cable Cond. Dielectric Ø Sheath Ø group Ø max maxi mini maxi 9 – 1 2-3-4 8 0.55 0.55 0.55 0.55 0.55 1.45 1.45 1.95 1.95 1.95 1.1 1.3 1.7 2.3 2.8 1.4 1.7 2.1 2.7 3.0 Cable assembly (page 39) 21 ® ® Watertight or vacuumtight models A range of sealed sockets and couplers allows the device on which they are fitted to reach a protection index of IP68 as per IEC 60529 (unmated). They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter «P» at the end of the reference for watertight model and by a «PV» for vacuumtight models. Epoxy resin or o-rings are used to seal these models. Mechanical and climatical Characteristics Endurance Humidity Temperature range Salt spray corrosion test Climatical category Leakage rate (He)1) Maximum operating pressure2) Value Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 60° C - 20° C/+100° C > 144h IEC 60512-6 test 11f 20/80/21 IEC 60068-1 < 10-7 mbar.l.s -1 IEC 60512-7 test 14b 60 bars IEC 60512-7 test 14d HGP Fixed socket, nut fixing, watertight or vacuumtight 17 1.5 S9 Part number ø 11 M7x0.5 ø 10.2 Note: 1) only for vacuumtight models. 2) this value corresponds to the maximum allowed pressure difference for the assembled socket. HGP.00.250.NTLP HGP.00.250.NTLPV Weight (g) 4.2 4.2 8 maxi P1 HGW Fixed socket, nut fixing, watertight with rear sealing ring 15 1 Part number ø8 M7x0.5 ø 13 S9 Panel cut-out (page 38) HGW.00.250.NTLP P1 3.8 mini 5.8 maxi Weight (g) 4.2 Panel cut-out (page 38) Note: Non standard, on request only HEP Fixed socket, nut fixing, watertight for printed circuit (back panel mounting) 18 3 4.7 S9 2 maxi S 6.3 5.08 Part number ø 0.7 ø11 ø8.7 M7x0.5 2.5 HEP.00.250.NTNP 0.9 (4 x) P5 Weight (g) 7.4 Panel cut-out (page 38) P15 PCB drilling pattern (page 38) 22 www.lemo.com ® ® EWF Fixed socket, nut fixing, watertight or vacuumtight (back panel mounting) 17 3 Part number ø 10.2 ø 11 M7x0.5 S9 EWF.00.250.NTLP EWF.00.250.NTLPV 9.5 maxi S9 P1 Weight (g) 4.2 4.2 Panel cut-out (page 38) EWV Fixed socket, watertight or vacuumtight 17 ø 1.5 2.6 ø 11 EWV.00.250.NTLP EWV.00.250.NTLPV ø 7.9 M7x0.5 Part number P2 Weight (g) 3.7 3.7 Panel cut-out (page 38) SWH Fixed coupler, nut fixing, vacuumtight 24.5 1.5 S9 M7x0.5 ø 11 ø 10.2 Part number SWH.00.250.NTMV P1 5.5 maxi Weight (g) 5.2 Panel cut-out (page 38) Note: this model is sealed with o-rings (no epoxy). VPS Fixed socket, short shell, vacuumtight with cable crimping (back panel mounting) ø 10 ø7 ø 11 M7x 0.5 24.5 1.5 max Part number VPS.00.250.CTLE31 Cable group 3-4 Cond. Ø Dielectric Ø Sheath Ø maxi maxi mini maxi 0.46 0.55 1.65 3.0 S5 16.5 P1 Panel cut-out (page 38) Cable assembly, please contact customer service www.lemo.com 23 ® ® Metal housing models with mechanical keying The straight plug and receptacle models FSG,XBG,XRG,XSG,ESG,EXG and PSG are available with a key to avoid cross mating of similar connectors. These models are not included in the NIM-CAMAC standard. The standard "G" key consists of one mechanical alignment key. Front view of the standard "G" key FSG Straight plug with key (G), with cable crimping Part number FSG.00.250.NTAE24 FSG.00.250.NTAE31 FSG.00.250.NTAE52 M5 L L 31 31 34 ø 6.4 Part number FSG.00.250.NTCE24 FSG.00.250.NTCE31 FSG.00.250.NTCE52 S 5.5 M4 2.5 0.4 0.55 0.97 0.95 1.65 3.05 2.35 3.0 5.2 L Dim M 31 31 34 23 23 26 Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi 1 3-4 6 0.28 0.4 0.46 0.55 0.90 0.97 0.95 1.65 3.05 2.35 3.0 5.2 Cable assembly, crimp contact (page 40) M7x0.5 Part number 17.5 XBG.00.250.NTN 9 P1 ø 10 7 1 3-4 6 Cond. Dielec. Sheath Ø maxi Ø maxi Ø maxi XBG Elbow socket (90°) with slotted nut, for printed circuit with key (G) 7 5.08 23 23 26 Cable group Cable assembly, solder contact (page 41) M S 5.5 Dim M Weight (g) 5.1 Panel cut-out (page 38) 3 P12 PCB drilling pattern (page 38) ø 0.7 (5 x) 5 maxi XRG Elbow socket (90°), with key (G), short shell and slotted nut, for printed circuit, screw fixing (back panel mounting) 14 7 2 x M 1.4 4 maxi Part number ø 10 M7x0.5 3 7 2.5 XRG.00.250.NTN P1 Weight (g) 3.8 Panel cut-out (page 38) P14 PCB drilling pattern (page 38) 24 www.lemo.com ® ® XSG Elbow socket (90°) with slotted with key (G), and hex nuts for printed circuit S9 7 2.5 ø 10.3 M7x0.5 5.08 Part number XSG.00.250.NTN 17.5 7 ø 10 P1 Weight (g) 5.4 Panel cut-out (page 38) 3 P12 PCB drilling pattern (page 38) ø 0.7 (5 x) 4 maxi ESG Fixed socket with two round nuts, threaded shell, with key (G) (back panel mounting) 15 Part number ø9 ø9 M7x0.5 2 ESG.00.250.NLL Weight (g) 3.1 4 maxi P1 EXG Elbow socket (90°) with slotted nut for printed circuit, with key (G), with o-ring on flange (back panel mounting). Special shell design. 2.5 7 Panel cut-out (page 38) ø10 M7x0.5 5.08 Part number 11 9 ø 10 17.5 EXG.00.250.NTNY P1 6.3 Panel cut-out (page 38) 5 maxi ø 0.7 ø 1.2 Weight (g) P15 PCB drilling pattern (page 38) (4x) PSG Fixed socket, nut fixing, with key (G) with cable crimping L www.lemo.com M7x0.5 S 5.5 5.5 maxi ø 10.2 1 ø8 S9 Part number Dim L Cable group PSG.00.250.NTME24 PSG.00.250.NTME31 PSG.00.250.NTME52 30 30 33 1 3-4 6 Cond. Ø Dielec. Sheath mini maxi Ø maxi Ø maxi 0.28 0.4 0.46 0.55 0.90 0.97 0.95 1.65 3.05 2.35 3.0 5.2 S 6.3 M4 Cable assembly, crimp contact (page 40) P5 Panel cut-out (page 38) 25 ® ® Threaded-coupling models The straight plug and receptacle models FVS, EPE and EPS are available with threaded coupling. On sockets, 3.2 mm minimum length of free threading must be available to ensure screw mating. These models are not included in the NIM-CAMAC standard. FVS Straight plug for cable crimping Part number FVS.00.250.NTAE24 FVS.00.250.NTAE31 FVS.00.250.NTAE52 M5 M FVS.00.250.NTCE24 FVS.00.250.NTCE25 FVS.00.250.NTCE30 FVS.00.250.NTCE31 FVS.00.250.NTCE35 FVS.00.250.NTCE44 FVS.00.250.NTCE52 FVS.00.250.NTCE56 ø9 S5 S5 M4 31 31 34 Cable group Cond. Ø maxi Dielec. Ø maxi Sheath Ø maxi 1 3-4 6 0.4 0.55 0.97 0.95 1.65 3.05 2.35 3.0 5.2 23 23 26 Cable assembly, solder contact (page 41) Part number L Dim L M L Dim M 31 31 31 31 31 31 34 34 23 23 23 23 23 23 26 26 Cable Cond. Ø Dielec. Sheath group mini maxi Ø maxi Ø maxi 1 1 2 3-4 8 5 6 7 0.28 0.28 0.28 0.46 0.46 0.28 0.90 0.90 0.4 0.4 0.4 0.55 0.55 0.4 0.97 0.97 0.95 1.15 1.65 1.65 1.65 2.65 3.05 3.05 2.35 2.35 3.0 3.0 3.35 4.35 5.2 5.45 Cable assembly, crimp contact (page 40) EPE Straight socket with two nuts, for printed circuit 17 14 3.2 mini ø 0.7 (5x) S9 0.7 maxi 7 Part number ø 10 ø10.2 M7x0.5 2.5 EPE.00.250.NTN 5.08 P1 Weight (g) 4.3 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) 7 M7x0.5 3.2 mini EPS Elbow socket (90°) with two nuts, for printed circuit ø 10.2 2.5 5.08 Part number S9 EPS.00.250.NTN Weight (g) 5.4 17.5 ø 0.7 (5 x) 26 ø 10 7 10 P1 Panel cut-out (page 38) P12 PCB drilling pattern (page 38) 0.7 maxi www.lemo.com ® ® Adaptors ABF Adaptor from LEMO plug to BNC socket 36 Part number 28 8.3 ø 11.5 ABF.00.250.NTA Weight (g) Part number 35.5 APF.00.250.DTAB APF.00.250.DTAR ø 6.4 ø 8.3 ø 4.6 APF Adaptor from LEMO plug to CINCH socket Colour of the ring Weight (g) white red 7 7 43.5 ABA Adaptor from LEMO socket to BNC plug ø 14.5 28.5 Part number ABA.00.250.NTL Weight (g) 18.7 ABC Adaptor from LEMO socket to BNC socket ø 14.5 29.5 Part number S 16 S 17 Part number ABD.00.250.NTM P7 S 11.7 www.lemo.com 17 ABD Adaptor from LEMO socket to BNC fixed socket 29.5 ø 19.5 1/2-28 UNEF - 2A ABC.00.250.NTM Weight (g) Weight (g) 21.4 Panel cut-out (page 38) 5 maxi 27 ® ABB Adaptor from LEMO fixed socket to BNC socket 3/8-32 UNEF - 2A ® 25 Part number ø 14 S 11 ABB.00.250.NTM P6 Weight (g) 9.4 Panel cut-out (page 38) 9.5 maxi S 8.7 ACA Adaptor from LEMO socket to C plug 31 ø 19.5 Part number ACA.00.250.NTL Weight (g) 32 Note: Non standard, on request only AGH Adaptor from LEMO socket to UHF plug ø 18.5 26 Part number AGH.00.250.NTL Weight (g) 13.8 ANA Adaptor from LEMO socket to N plug 33.5 ø 20.5 Part number ANA.00.250.NTL Weight (g) 38 ANB Adaptor from LEMO socket to N socket ø 17.5 45.5 Part number ANB.00.250.NTM Weight (g) 61.7 5/8 - 24 UNEF - 2A Note: Non standard, on request only 28 www.lemo.com 5/8 - 24 UNEF - 2A ® 46 ® ANC Adaptor from LEMO socket to N fixed socket S 19 ø 21.8 Part number ANC.00.250.NTM P8 S 13.5 Weight (g) 63.5 Panel cut-out (page 38) 17 maxi Note: Non standard, on request only ASA Adaptor from LEMO socket to SMA plug 30 ø9 Part number ASA.00.250.NTL Weight (g) 4.9 S8 1 / 4 - 36 UNS - 2A ASB Adaptor from LEMO socket to SMA socket 30.8 ø9 Part number ASB.00.250.NTM Weight (g) 4.6 S8 1 / 4 - 36 UNS - 2A ASF Adaptor from LEMO plug to SMA socket 31.8 23.8 ø9 Part number ASF.00.250.NTA Weight (g) 4.6 S8 ASG Adaptor from LEMO plug to SMA plug 31 ø9 23 Part number ASG.00.250.NTC Weight (g) 4.9 S8 www.lemo.com 29 ® ® Variant Bend relief for models with collet (letter Z in the variant position) Need to be ordered Reference Need to be ordered separately (see page 33) C15Z C17Z C22Z C27Z C31Z C52Z K37Z K42Z D42Z D52Z GMA.00.0●●.D● GMA.00.0●●.D● – GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● GMA.0B.0●●.D● Note: The “GMD” are thin bend reliefs (for very flexible cables) Bend relief for models for cable crimping (no letter in the variant position) The bend relief can be fitted directly over the crimp ferrule Need to be ordered 30 Reference Need to be ordered separately (see page 33) E24 E25 E30 E31 E32 E35 E44 E52 E56 GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● GMD or GMB.00.0●●.D● – – – – Note: The “GMD” are thin bend reliefs (for very flexible cables) www.lemo.com ® ® Assembled cables MFB models MSB models Delay lines Part number MFB.00.250.RTE005 MFB.00.250.RTE010 MFB.00.250.RTE020 MFB.00.250.RTE030 MFB.00.250.RTE040 MFB.00.250.RTE050 MFB.00.250.RTE060 MFB.00.250.RTE080 MFB.00.250.RTE100 MFB.00.250.RTE160 MFB.00.250.RTE200 MFB.00.250.RTE320 MFB.00.250.RTE640 Assembled Cables Delay (ns) 0.5 1.0 2.0 3.0 4.0 5.0 6.0 8.0 10.0 16.0 20.0 32.0 64.0 Part number MSB.00.250.RTE005 MSB.00.250.RTE010 MSB.00.250.RTE020 MSB.00.250.RTE030 MSB.00.250.RTE040 MSB.00.250.RTE050 MSB.00.250.RTE060 MSB.00.250.RTE080 MSB.00.250.RTE100 MSB.00.250.RTE160 MSB.00.250.RTE200 MSB.00.250.RTE320 MSB.00.250.RTE640 Length (cm) Part number MFB.00.250.LTE010 MFB.00.250.LTE020 MFB.00.250.LTE030 MFB.00.250.LTE040 MFB.00.250.LTE050 MFB.00.250.LTE060 MFB.00.250.LTE080 FRT MFB.00.250.LTE100 MFB.00.250.LTE150 MFB.00.250.LTE200 MFB.00.250.LTE300 MFB.00.250.LTE400 MFB.00.250.LTE500 10 20 30 40 50 60 80 100 150 200 300 400 500 Part number MSB.00.250.LTE010 MSB.00.250.LTE020 MSB.00.250.LTE030 MSB.00.250.LTE040 MSB.00.250.LTE050 MSB.00.250.LTE060 MSB.00.250.LTE080 MSB.00.250.LTE100 MSB.00.250.LTE150 MSB.00.250.LTE200 MSB.00.250.LTE300 MSB.00.250.LTE400 MSB.00.250.LTE500 Note: the standard cable used to manufacture these cable assemblies is according to IEC.50.2.1 standard. On request this type of cable can be replaced by other coaxial cables. Other cable lengths are available on request. Accessories Fitting of the cord Slide the plug into the loop of the cord. Place the loop into the groove in front of the collet nut and tighten the loop. BFG Caps for plug with or without keying Part number BFG.00.100.PCSG Weight (g) 0.7 9.8 ø 7.5 10 60 www.lemo.com Note: upon request this cap can be supplied in black and the last letter “G” of the part number should be replaced with “N”. ● ● ● ● ● Body material: Polyoxymethylen (POM) grey Cord material: Polyamid 6, grey O-ring material: Silicone rubber Maximum operating temperature: 100°C Watertightness: IP61 according to IEC 60529 31 ® ® BRA Blanking cap for fixed socket and free straight socket 9 3.5 9.8 ø 7.5 Part number ø 3.5 60 BRA.00.200.PCSG Weight (g) 0.6 Note: upon request this cap can be supplied in black and the last letter “G” of the part number should be replaced with “N”. ● O-ring material: Silicone rubber ● Maximum operating temperature: 100°C ● Watertightness: IP61 according to IEC 60529 ● Body material: Polyoxymethylen (POM) grey ● Cord material: Polyamid 6, grey Fitting of the cord Slide the socket into the loop of the cord. Place the loop into the groove in front of the collet nut and tighten the loop. BRD Blanking cap for free socket Part number BRD.00.200.PCSG 9 Weight (g) 0.5 Note: upon request this cap can be supplied in black and the last letter “G” of the part number should be replaced with “N”. 9.8 ø 7.5 3.5 ● ● ● ● ● 60 Body material: Polyoxymethylen (POM) grey Cord material: Polyamid 6, grey O-ring material: Silicone rubber Maximum operating temperature: 100°C Watertightness: IP61 according to IEC 60529 BRE Blanking cap for fixed socket, free socket and coupler 8.8 7.5 3.5 Part number 6.5 ø 3.5 60 ø8 BRE.00.200.NAS Weight (g) ● ● ● ● ● Body material: Brass (UNS C 38500), nickel-plated (3 µm) Cable material: Stainless steel O-ring material: Silicone rubber or FPM Maximum operating temperature: 250°C Watertightness: IP61 according to IEC 60529 GCD Earthing cap ø8 øC L S7 Part number GCD.00.020.LA GCD.00.032.LA GCD.00.050.LA Cable group Dim. L C 1 2-3-4 6 12 2.0 16 3.2 19 5.0 Note: the shield braid of the cable should be soldered onto the back of the cap screwed on the socket outer shell. ● Material: Brass (UNS C 38500) gold-plated (0.5 µm) 32 www.lemo.com ® ® GM• Bend relief (Polyurethane) A Dim. L ø Cable max min Nut for fitting the bend relief part nb GMA.00.012.D • GMA.00.018.D• GMB.00.025.D• GMB.00.028.D• GMB.00.032.D• GMD.00.025.D• GMD.00.028.D• GMD.00.032.D• 1.2 1.8 2.5 2.8 3.2 2.5 2.8 3.2 22 22 22 22 22 22 22 22 1.4 2.1 2.8 3.1 3.5 2.8 3.1 3.5 1.1 1.8 2.5 2.8 3.2 2.5 2.8 3.2 FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN FFM.00.130.LN GMA.0B.025.D • GMA.0B.030.D• GMB.0B.035.D• GMB.0B.040.D• GMB.0B.045.D• 2.5 3.0 3.5 4.0 4.5 24 24 24 24 24 2.9 3.4 3.9 4.4 5.2 2.5 3.0 3.5 4.0 4.5 FFM.0B.130.LC FFM.0B.130.LC FFM.0B.130.LC FFM.0B.130.LC FFM.0B.130.LC øA Part number L Note: a) for use with crimp models and nut for fitting a bend relief. b) the last letter of the part number “•” specifies the colour. Refer to the table below, for GRA washers, to define another colour and replace the letter “•” by the one corresponding to the colour required. c) material: Polyurethan (Desmopan 786) d) operating temperature: -40°C + 80°C GRA Insulating washers Weight (g) Part number GRA.00.269.G• 1.8 ø10 1 ø 8.8 6.4 3.5 maxi Note: a) sockets and plugs mounted on panels can be fitted with insulating washers. The nine colours available combined with those for the bend reliefs makes colour coding possible. b) the last letter of the part number “•” specifies the colour. Refer to the table below to define another colour and replace the letter “•” by the one corresponding to the colour required. c) material: Polyamid d) operating temperature: -40°C + 80°C Ref. 8 0.1 Colour A B G blue white grey Ref. J M N Colour Ref. yellow brown black R S V Colour red orange green Spare Parts FFS Crimp ferrule L øB øA Part number FFS.00.160.DN FFS.00.161.MN FFS.00.162.DN FFS.00.163.DN FFS.00.164.DN CRK.0A.160.DN Cable group øA Dim. øB L 1 2-3-4 8 5 6 7 3.1 3.8 4.4 5.3 6.2 6.2 2.4 3.05 3.4 4.4 5.25 5.5 8 8 8 8 11 11 Note: sockets and plugs to be crimped are always supplied with a crimp ferrule. To order this accessory separately, use the above part numbers. ● Material: Copper (UNS C 18700) nickel-plated (3µm) www.lemo.com 33 ® ® GBB Tapered washer ø9 2 ø 7.1 Weight (g) Part number GBB.00.250.LN 0.2 Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) GBA Locking washer ø9.5 1 ø7.1 Weight (g) Part number GBA.00.250.FN 0.2 Note: sockets and plugs are always supplied with a locking washer. To order this accessory separately, use the above part number. GEA Hexagonal nut 9 2 M7 x 0.5 Weight (g) Part number ø 10.2 GEA.00.240.LN 0.6 Note: sockets and plugs are supplied with a hexagonal nut as standard. To order this accessory separately, use the above part number. The last letters “LN” of the part number refer to the nut material and treatment. If a nut in aluminium alloy is desired, replace the last letters of the part number by “PT”. ● Material: - Brass (UNS C 38500) nickel-plated (3 µm) - Aluminium alloy natural anodized GEB Round nut ø9 M7 x 0.5 4 Part number Weight (g) Standard for models 0.8 ECP, ESG GEB.00.240.LN Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) GEC Conical nut 8 M7 x 0.5 2.5 Weight (g) ø 10 Part number GEC.00.240.LN 0.6 Note: to order this accessory separately, use the above part number. ● Material: Brass (UNS C 38500) nickel-plated (3 µm) GEG Notched nut øA L øB e Part number GEG.00.240.LN A 8.7 Dimensions (mm) B e 10 M7 x 0.5 Standard for models L 2.5 EPE, EPS, EPR PES, PFS, PLK, VPS, HEP Note: to order this accessory separately, use the above part numbers. ● Material: Brass (UNS C 38500) nicked-plated (3 µm) 34 www.lemo.com ® ® GEB Slotted nut øA L e A Dimensions (mm) B e GEB.00.242.LN 8.5 10 M7 x 0.5 Standard for models L øB Part number 2.5 ELF, XBG, XRG, XSG, EXG Note: to order this accessory separately, use the above part numbers. ● Material: Brass (UNS C 38500) nicked-plated (3 µm) GCA Earthing Washer ø 9.5 0.4 ø 7.1 18.2 Part number GCA.00.255.LT Weight (g) 0.2 ● Material: Brass (UNS C 27400) treated CuSnZn (2 µm) Tooling DCG Spanner for hexagonal nut 40 50 Part number of the nut Part number DCG.91.149.0TN GEA.00.240.LN ● Material: Blackened steel ø 14 DCA Spanner for hexagonal nut with locator for flats on socket thread 65 maxi 50 DCA.91.149.0TN ø 14 Part number of the nut Part number GEA.00.240.LN ● Material: Blackened steel ø 10.1 DCH Spanner for notched nut ø 12.8 124 Part number DCH.91.101.PA Part number of the nut GEG.00.240.LN 48.3 ● Material: blue polyurethane www.lemo.com 35 ® ® DCB Spanner for slotted nut 60 Part number of the nut 19 Part number DCB.91.455.0LN GEB.00.242.LN ø 11 ● Material: Steel, nicked plated DCB Spanner for round nut 50 Part number of the nut 40 Part number DCB.91.119.0TN GEB.00.240.LN ø 11 ● Material: Blackened steel DCN Spanner for assembling plug with 3 latches 12 Part number 42 ø9 DCN.91.905.0TK ● Material: Blackened steel DCP Flat spanner for collet nut L Dimensions M N S1 M Part number DCP.99.045.TC DCP.99.050.TC DCP.99.055.TC DCP.99.060.TC N S1 S1 L 70 78 78 78 2 2 2 2 10.5 12.6 12.6 12.6 4.5 5.0 5.5 6.0 ● Material: Chrome-plated steel DCR Extraction tool for plugs Part number DCR.91.106.0PN ø 12 ø 10.3 120 ● Material: Black Polypropylene 9 36 Note: this type of tool has been produced in order to facilitate the mating and unmating of plugs and is particularly useful in high density applications. www.lemo.com ® ® DPE Crimping tool with die Part number DPE.99.000.0K DPE.99.123.1K DPE.99.123.8K DPE.99.124.3K DPE.99.125.2K DPE.99.176.2K Cable group Crimp collet ref. Crimping tool with no die 1 E24 2-3-4 E30, E31 8 E35 5 E44 6-7 E52, E56 DPN Dies Part number A A DPN.99.123.1K DPN.99.123.8K DPN.99.124.3K DPN.99.125.2K DPN.99.176.2K 1 2-3-4 8 5 6-7 Die dimension For contacts For shield A B L A B 1.29 1.29 1.29 1.29 1.71 0.91 0.91 0.91 0.91 1.21 2.0 2.0 2.0 2.0 2.5 3.10 3.80 4.36 5.20 6.20 2.70 3.30 3.78 4.50 5.37 B B L Cable group for contacts www.lemo.com for shield ● Dies material: Blackened steel 37 ® ® Panel cut-outs Panel cut-out P1 P2 P3 P4 P5 Cut-out P1 B + 0.1 0 L mini e P6 P7 øA P2 P3 P4 + 0.1 0 P8 P5 B + 0.1 0 L mini øA P6 P7 P8 Model ECP-EPE-EPR-EPS-ERC EWF-EXG-FAB-HGP HGW-SWH-VPS-XBG XSG-XRG EWV ERC-ERX ERT EHP-ELF-ERA-ERE-ERM ERN-FAA-FAN-PES-PFS PLK-PSA-PSG-PSS 1) ABB ABD ANC Dimensions B L A e 7.1 – 14.5 – – – 6.92 + 0.02 0 – – – 12.0 9.0 – M7x0.5 M7x0.5 – 7.1 6.4 14.5 – 9.7 12.9 16.1 9.0 11.7 13.7 15.0 20.5 24.0 – – – Note: 1) If these models are used with a tapered washer GBB, the panel cut-out must be according P1. + 0.1 0 Recommended mounting nut torque: 1 Nm. PCB drilling pattern P9 P10 P11 P12 P15 Drill B ø A + 00.1 = = B øC + 0.1 0 Model A Dimensions B C P9 EPN 1.0 5.08 – P10 EPA-EPB-EPC-EPL-EPK EPM-FPL 0.8 5.08 0.8 P11 P12 P15 FPA EPE-EPS-EPR-XSG HEP, EXG 0.8 0.8 1.3 5.08 5.08 5.08 1.1 0.8 0.8 P13 EPY 0.8 5.08 0.8 XRG 1.8 5.5 0.8 P14 P13 B ø A + 00.1 B = = øC + 0.1 0 P14 B ø A + 00.1 2.05 ø C + 00.1 38 www.lemo.com ® ® Cable assembly Terminating of plugs and straight sockets with cable collet 5 M1 M2 4 M3 3 1 Straight plug 2 5 Free socket 3 4 5 1 Fixed socket nut fixing 1. Cable preparation First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 Cable group T M1 S L T M2 S L T M3 S L 1-2-3-4-8 6-7 4 – 4.5 – 9 – – 7.5 – 8.5 – 13 5 – 5 – 8 – T ± 0.2 2. Cable termination 2.1 Place the collet nut ➀ and the collet ➁ on the cable. Fold back the shield braid onto the conical part of the collet, and trim to the outer edge of the collet Crimp 2.2 Slide the subassembly ➂ to trap the shield braiding and solder the central conductor into the contact. Crimp 2.3 Slide the insulator ➃ onto the subassembly ➂ until it rests against the earthing sleeve of the subassembly ➂. 2.4 Slide the assembly into the connector outer shell ➄. Screw the collet nut ➀ into the connector outer shell ➄ using the appropriate tool and tighten to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37). Push the bend relief (if used) onto the collet nut. Note: these terminating instructions apply to the following models: M1 = FFA, FFE, FFF, PCA, PSA M2 = FFY M3 = FFC www.lemo.com 39 ® ® Terminating of plugs and straight sockets with cable crimping (crimp contact) 4 M4 2 3 Straight plug 1 4 Free socket 3 2 4 Fixed socket nut fixing 1. Cable preparation First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 Cable group T M4 S L 1-2-3-4-8 6-7 7 7 15 15 19.5 21.5 T ± 0.2 2. Cable termination 2.1 Place crimp ferrule ➀ on the cable. Widen the shield braid. Slide the subassembly ➁ into the cable until the insulator rests against the dielectric and the cable conductor is visible through the contact inspection hole. Crimp 2.2 Crimp the contact with the LEMO crimping tool using the square hole (see “Tooling” on page 37). Gently pull the cable in order to check the crimping. Crimp 2.3 Slide the crimp ferrule ➀ onto the shield until it rests against the crimp backnut of the subassembly ➁. Crimp with the same LEMO crimping tool using the hexagonal opening. Slide the insulator ➂ onto the subassembly ➁. 2.4 Slide the assembly into the connector shell ➃ and screw it onto the subassembly ➁. Tighten using the appropriate tool to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37). Push the bend relief (if used) onto the crimp ferrule ➀. Note: these terminating instructions apply to the following models: M4 = FFS, FFV, PCS, PSS, PES 40 www.lemo.com ® ® Terminating of plugs and straight sockets with cable crimping (solder contact) 4 M5 2 3 Straight plug 1 4 Free socket 3 2 4 Fixed socket nut fixing 1. Cable preparation First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 Cable group T M5 S L 1-2-3-4-8 6-7 5 5 12 12 17 19 T ± 0.2 2. Cable terminating 2.1 Place the crimp ferrule ➀ on the cable. Widen the shield braid. Slide the subassembly ➁ over the cable until the insulator rests against the dielectric and the cable conductor is visible through the contact solder hole. 2.2 Solder the conductor through the hole. Solder Solder 2.3 Slide the crimp ferrule ➀ onto the shield until it rests against the crimp backnut of the subassembly ➁. Crimp with the LEMO crimping tool using the hexagonal opening (see “Tooling” on page 37). Slide the insulator ➂ onto the subassembly ➁. 2.4 Slide the assembly into the connector shell ➃ and screw it onto the subassembly ➁. Tighten using the appropriate tool to a torque of 0.25 Nm (see tooling on pages 35, 36 and 37). Push the bend relief (if used) onto the crimp ferrule. Note: these terminating instructions apply to the following models: M5 = FFS, FFV www.lemo.com 41 ® ® Terminating of elbow plugs (90°) with cable collet (solder contact) 3 M6 and cable crimp (solder contact) M7 5 4 2 3 4 2 1 1 1. Cable preparation 1. First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 2. Solder 42 Cable group T M6 S L 1-2-3-4-8 1 3.5 6.5 First place the bend relief (if to be used) on the cable. Strip the cable according to dimensions below. L ± 0.2 S ± 0.2 T ± 0.2 T ± 0.2 Cable terminating Cable preparation 2. Cable group T M7 S L 1-2-3-4-8 6-7 1 3 4.5 4.5 9 11 Cable terminating 2.1 Place the crimp ferrule ➀ and collet ➁ on the cable. Fold back the shield braid onto the conical part of the collet, and trim to outer edge of the collet. 2.1 Place the cable crimp ferrule ➀ on the cable and widen the braiding. 2.2 Slide the assembly into the connector shell ➂ and tighten the collet nut ➀ using the appropriate tool to a torque of 0.25 Nm (see “Tooling” on page 35, 36 and 37). Check that the cable conductor rests in the contact slot, solder the conductor through the hole. 2.2 Slide the cable into the connector shell ➁. Check that cable conductor rests in the contact slot, tin solder the conductor through the hole. Slide the crimp ferrule ➀ over the braiding until it reaches the connector shell ➁. Crimp with the LEMO crimp tool using the hexagonal opening (see “Tooling” on page 37). Solder 2.3 Place the insulating sleeve ➃ over the soldered contact. 2.3 Place the insulating sleeve ➂ over the soldered contact. 2.4 Close the access hole with the flat screw ➄. Push the bend relief (if used) onto the collet nut ➀. 2.4 Close the connector hole with the flat screw ➃. Push the bend relief (if used) onto the crimping tube ➀. Note: these terminating instructions apply to the following models: Note: these terminating instructions apply to the following models: M6 = FLA M7 = FLS, FLV www.lemo.com