EUROPEAN IRON CABINET FITTINGS
advertisement
PAGE 80 EUROPEAN IRON CABINET FITTINGS The items on this page are a small selection of the many possiblities that can be realized by combining the rings knobs and backplates on the following several pages. Many backplates can also be supplied as keyhole escutcheons. EUROPEAN IRON KNOBS AND RINGS Code 13 Patinated iron 81EUP1 Code 13 Patinated iron 81EUP2 These knobs and rings can be combined with any of the backplates shown on the next ten pages. Examples can be seen on page 80. Rings are supplied with a suitable nut and knobs are supplied with machine screw. Code 13 Patinated iron 81EUP4 Code 13 Patinated iron 81EUP6 Code 13 Patinated iron 81EUP7 PAGE 81 Code 13 Patinated iron 81EUP3 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 13 Patinated iron 81EUP5 Code 13 Patinated iron 81EUP8 PAGE 82 EUROPEAN IRON BACKPLATES These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 LH With hole 82U10 With keyhole 82U10K RH (shown) With hole 82U11 With keyhole 82U11K Code 13 LH (shown) With hole 82U12 With keyhole 82U12K RH With hole 82U13 With keyhole 82U13K Code 13 LH (shown) With hole 82U14 With keyhole 82U14K RH With hole 82U15 With keyhole 82U15K EUROPEAN IRON BACKPLATES PAGE 83 These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 83U18 With keyhole 83U18K Code 13 Patinated iron With hole 83U16 With keyhole 83U16K Code 13 Patinated iron With hole 83U17 With keyhole 83U17K PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. PAGE 84 EUROPEAN IRON BACKPLATES These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron LH (shown) With hole 84U19 With keyhole 84U19K RH With hole 84U20 With keyhole 84U20K Code 13 Patinated iron LH With hole 84U21 With keyhole 84U21K RH (shown) With hole 84U22 With keyhole 84U22K Code 13 Patinated iron With hole 84U23 With keyhole 84U23K PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 13 Patinated iron LH (shown) With hole 84U24 With keyhole 84U24K RH With hole 84U25 With keyhole 84U25K EUROPEAN IRON BACKPLATES These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron LH (shown) With hole 85U28 With keyhole 85U28K RH With hole 85U29 With keyhole 85U29K Code 13 Patinated iron LH (shown) With hole 85U26 With vertical keyhole 85U26VK With horizontal keyhole 85U26HK RH With hole 85U27 With vertical keyhole 85U27VK With horizontal keyhole 85U27HK Code 13 Patinated iron LH (shown) With hole 85U30 With keyhole 85U30K RH With hole 85U31 With keyhole 85U31K PAGE 85 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 13 Patinated iron With hole 85U32 With vertical keyhole 85U32VK With horizontal keyhole 85U32HK PAGE 86 EUROPEAN IRON BACKPLATES These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 86U37 With keyhole 86U37K Code 13 Patinated iron LH (shown) With hole 86U33 With keyhole 86U33K RH With hole 86U34 With keyhole 86U34K Code 13 Patinated iron LH With hole 86U35 With vertical keyhole 86U35VK With horizontal keyhole 86U35HK RH (shown) With hole 86U36 With vertical keyhole 86U36VK With horizontal keyhole 86U36HK PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 Patinated iron With hole 86U38 With keyhole 86U38K Code 13 Patinated iron With hole 86U39 With keyhole 86U39K EUROPEAN IRON BACKPLATES PAGE 87 These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 87U41 With keyhole 87U41K Code 13 Patinated iron With hole 87U40 With keyhole 87U40K Code 13 Patinated iron With hole 87U43 With keyhole 87U43K Code 13 Patinated iron With hole 87U44 With keyhole 87U44K Code 13 Patinated iron With hole 87U45 With keyhole 87U45K Code 13 Patinated iron With hole 87U42 With keyhole 87U42K Code 13 Patinated iron With hole 87U46 With keyhole 87U46K PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. EUROPEAN IRON BACKPLATES PAGE 88 These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 88U47 With keyhole 88U47K Code 13 Patinated iron With hole 88U48 With keyhole 88U48K Code 13 Patinated iron With hole 88U51 With keyhole 88U51K PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 Patinated iron With hole 88U49 With keyhole 88U49K Code 13 Patinated iron With hole 88U52 With keyhole 88U52K Code 13 Patinated iron With hole 88U50 With keyhole 88U50K Code 13 Patinated iron With hole 88U53 With keyhole 88U53K EUROPEAN IRON BACKPLATES These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 89U54 With keyhole 89U54K Code 13 Patinated iron With hole 89U55 With keyhole 89U55K Code 13 Patinated iron With hole 89U59 With keyhole 89U59K Code 13 Patinated iron With hole 89U56 With keyhole 89U56K Code 13 Patinated iron With hole 89U60 With keyhole 89U60K Code 13 Patinated iron With hole 89U57 With keyhole 89U57K Code 13 Patinated iron With hole 89U61 With keyhole 89U61K PAGE 89 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 13 Patinated iron With hole 89U58 With keyhole 89U58K Code 13 Patinated iron With hole 89U62 With keyhole 89U62K EUROPEAN IRON BACKPLATES PAGE 90 These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 90U63 With keyhole 90U63K Code 13 Patinated iron With hole 90U65 With keyhole 90U65K Code 13 Patinated iron With hole 90U64 With keyhole 90U64K Code 13 Patinated iron With hole 90U66 With keyhole 90U66K Code 13 Patinated iron With hole 90U67 With keyhole 90U67K Code 13 Patinated iron With hole 90U68 With keyhole 90U68K PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 Patinated iron With hole 90U69 With keyhole 90U69K Code 13 Patinated iron With hole 90U70 With keyhole 90U70K Code 13 Patinated iron With hole 90U71 With keyhole 90U71K EUROPEAN IRON BACKPLATES PRODUCT SIZE All products are shown full size over a 1/4” grid. PAGE 91 These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron With hole 91U75 With keyhole 91U75K Code 13 Patinated iron With hole 91U72 With keyhole 91U72K Code 13 Patinated iron With hole 91U76 With keyhole 91U76K Code 13 Patinated iron With hole 91U73 With keyhole 91U73K Code 13 Patinated iron RH (shown) With hole RH With keyhole LH With hole LH With keyhole Code 13 Patinated iron With hole 91U79 With keyhole 91U79K Code 13 Patinated iron With hole 91U74 With keyhole 91U74K Code 13 Patinated iron With hole 91U80 With horizontal keyhole 91U80HK With vertical keyhole 91U80VK 91U77 91U77K 91U78 91U78K PAGE 92 EUROPEAN IRON BACKPLATES These backplates can be mated to any of the knobs and rings on page 81. Example combinations can be seen on page 80. Code 13 Patinated iron 92U83 Code 13 Patinated iron 92U82 Code 13 Patinated iron 92U81 Code 13 Patinated iron 92U84 Code 13 Patinated iron 92U85 Code 13 Patinated iron 92U88 Code 13 Patinated iron 92U86 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 13 Patinated iron 92U87 EUROPEAN IRON AND PORCLAIN KNOBS Code 13 Black iron 93KF3 Code 13 Black iron 93KF4 Code 13 Black iron 93KF5 Code 7 Black iron 93REG12 Code 13 Patinated iron Knob 93KF2 Rose 93KE2 Code 26 Rusted iron White porclain 93REG14 Polished brass White porclain 93REG142 Code 26 Rusted iron White porclain 93REG15 Polished brass White porclain 93REG152 PAGE 93 Code 7 Black iron 93REG13 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 26 Rusted iron White porclain 93REG16 Polished brass White porclain 93REG162 PAGE 94 Code 7 Black iron 94ET3 Code 7 Black iron 94RE3 Code 28 Highlighted black iron 94RS3 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. EUROPEAN IRON KNOBS Code 7 Black iron 94ET5 Code 7 Black iron 94RE5 Code 28 Highlighted black iron 94RS4 Code 7 Black iron 94ET7 Code 7 Black iron 94RE7 Code 28 Highlighted black iron 94RS5 Code 28 Highlighted black iron 94RS6 EUROPEAN IRON KNOBS Code 26 Rusted iron 95RE41 Code 26 Rusted iron 95RE6 Code 26 Rusted iron 95RE43 Code 26 Rusted iron 95RE4 Code 26 Rusted iron 95RE45 Code 26 Rusted iron 95RE2 PAGE 95 Code 26 Rusted iron 95RE48 Code 26 Rusted iron 95RE49 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 26 Rusted iron 95RE10 Code 26 Rusted iron 95RE9 Code 26 Rusted iron 95RE8 BRASS CABINET KNOBS PAGE 96 Code 16 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 96KSK1P 96KSK1A 96KSK1PC 96KSK1PN 96KSK1SN Code 16 Polished brass 96KSL1P Antiqued brass 96KSL1A Polished chrome 96KSL1PC Polished nickel 96KSL1PN Satin nickel 96KSL1SN Code 16 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 96KSK2P 96KSK2A 96KSK2PC 96KSK2PN 96KSK2SN Code 16 Polished brass 96KSL2P Antiqued brass 96KSL2A Polished chrome 96KSL2PC Polished nickel 96KSL2PN Satin nickel 96KSL2SN Code 16 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 96KSK3P 96KSK3A 96KSK3PC 96KSK3PN 96KSK3SN Code 16 Polished brass 96KSL3P Antiqued brass 96KSL3A Polished chrome 96KSL3PC Polished nickel 96KSL3PN Satin nickel 96KSL3SN PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 16 Polished brass 96KSK4P Antiqued brass 96KSK4A Polished chrome 96KSK4PC Polished nickel 96KSK4PN Satin nickel 96KSK4SN Code 16 Polished brass 96KSL4P Antiqued brass 96KSL4A Polished chrome 96KSL4PC Polished nickel 96KSL4PN Satin nickel 96KSL4SN BRASS CABINET KNOBS Code 1 Polished brass 97KSB5P Antiqued brass 97KSB5A Polished chrome 97KSB5PC Polished nickel 97KSB5PN Satin nickel 97KSB5SN Code 1 Polished brass 97KSB4P Antiqued brass 97KSB4A Polished chrome 97KSB4PC Polished nickel 97KSB4PN Satin nickel 97KSB4SN Code 1 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel 97KCB1P 97KCB1A 97KCB1PC 97KCB1PN 97KCB1SN Code 1 Polished brass 97KNB7P Antiqued brass 97KNB7A Code 1 Polished brass Antiqued brass Polished chrome Polished nickel Satin nickel Code 1 Polished brass 97KNB1P Antiqued brass 97KNB1A 97KCB2P 97KCB2A 97KCB2PC 97KCB2PN 97KCB2SN Code 1 Polished brass 97KCB3P Antiqued brass 97KCB3A Polished chrome 97KCB3PC Polished nickel 97KCB3PN Satin nickel 97KCB3SN Code 1 Polished brass 97KNB2P Antiqued brass 97KNB2A PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass 97KNB3P Antiqued brass 97KNB3A PAGE 97 Code 1 Polished brass 97KSB6P Antiqued brass 97KSB6A Polished chrome 97KSB6PC Polished nickel 97KSB6PN Satin nickel 97KSB6SN Code 1 Polished brass 97KCB4P Antiqued brass 97KCB4A Polished chrome 97KCB4PC Polished nickel 97KCB4PN Satin nickel 97KCB4SN Code 1 Polished brass 97KNB4P Antiqued brass 97KNB4A BRASS CABINET KNOBS PAGE 98 These three knobs are hollow brass and face mounted with a non-removable integral wood screw. Code 1 Polished brass 98KSB7 Code 1 Polished brass 98KSB8 Code 5 Polished brass 98KV22 Code 1 Polished brass Antiqued Polished chrome Polished nickel Satin nickel 98K61P 98K61A 98K61PC 98K61PN 98K61SN Code 5 Polished brass 98KV10 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass Antiqued Polished chrome Polished nickel Satin nickel Code 5 Polished brass 98KV11 Code 1 Polished brass 98KSB9 Code 5 Polished brass 98KV23 98K63P 98K63A 98K63PC 98K63PN 98K63SN Code 5 Polished brass 98KV24 Code 1 Polished brass Antiqued Polished chrome Polished nickel Satin nickel Code 5 Polished brass 98KV12 98K64P 98K64A 98K64PC 98K64PN 98K64SN Code 5 Polished brass 98KV13 BRASS CABINET KNOBS Code 1 Polished brass 99K71P Antiqued brass 99K71A Code 1 Polished brass 99K72P Antiqued brass 99K72A PAGE 99 Code 1 Polished brass 99K73P Antiqued brass 99K73A PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 1 Polished brass 99K1P Antiqued brass 99K1A Code 1 Polished brass 99KC1P Antiqued brass 99KC1A Code 1 Polished brass 99K2P Antiqued brass 99K2A Code 1 Polished brass 99KS1P Antiqued brass 99KS1A Code 1 Polished brass 99K3P Antiqued brass 99K3A Code 1 Polished brass 99K41P Antiqued brass 99K41A Code 1 Polished brass 99K4P Antiqued brass 99K4A All these knobs are authentically manufactured. They combine a cast brass body and a pressed brass face. This technology allows for a finer level of detail than would be possible with sand casting, while retaining most of the solidity of a cast knob. The size larger knobs are mounted by machine screw, while the smaller sizes have a non-removable integral woodscrew. BRASS CABINET KNOBS PAGE 100 Code 4 Antiqued brass 100KBY15 Code 4 Antiqued brass 100KBY31 Code 4 Antiqued brass 100KBY2 Code 4 Antiqued brass 100KBY17 Code 4 Antiqued brass 100KBY1 Code 4 Antiqued brass 100KBY3 Code 4 Antiqued brass 100KBY42 No other reproduction hardware available can begin to compete with the convincing quality of our Code 4 fittings. Each is a clone of an original cast by the time consuming and demanding lost wax process. No attempt has been made to “improve” upon the original either visually or functionally. In almost all cases you will find the quality of line and generosity of form exceeds that of modern copies. Each item is finished in a beautiful and genuine patina that can be removed with common brass polish for a “cared for” effect. If you would like your work to stand out from the crowd, then consider our Code 4 range. Code 4 Antiqued brass 100KBY16 Code 4 Antiqued brass 100KBY4 Code 4 Antiqued brass 100KBY5 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 4 Antiqued brass 100KBY6 KNOBS GENERAL The history of the knob is woven through the history of furniture. Every age found application for this simple fitting. Despite their apparent utility, knobs are somewhat less common in earlier periods than later. This may be explained by their fundamental vulnerability. Rugged durability is the mark of medieval and Jacobean furniture. The need for furniture to survive rough treatment and travel would discourage the use of fixed projections. Many handles seen on early furniture took the form of drops or rings that project very little, or were simply keys. Later we find the knob gaining more general favor. The knob played a restricted role during the 18th century periods of formal furniture making. If they are to be found at all, it will be on small doors and drawers inside desks. These little brass knobs were usually cast, hand finished and attached with a simple hand cut integral woodscrew. Only at the beginning of the 19th century does the knob become an acceptable exposed fitting on fine furniture. Hepplewhite and Sheraton introduced large decorated face brass knobs in their late 18th and 19th century designs. The technology of the time allowed fine detail to be pressed into thin brass sheet. These faces were then spun onto a heavier body of solid brass. Time has taken its toll on these knobs. They damaged easily and, as fashions changed, most were replaced with more popular bail type handles. Turned wood knobs were popular with the Shakers and others of minimalist persuasion and throughout the 19th century the bulk of country furniture styles employed wooden knobs. USE We stock knobs in wood, brass and iron that range in size from 5/16” diameter all the way up to the 2 1/2” diameter. Most are fixed and some operate latches. We stock knobs that attach by integral woodscrew, woodscrew from behind, glued tenon, machine screw, bolt and nut. Some knobs come with round backplates to protect the cabinet work from fingernail attack, others come with decorative escutcheons and many stand alone without any kind of backplate. Most questions regarding knobs fall into the related topics of size, quantity and positioning. Knobs, more than any other fitting, bear physical resemblance to body parts, notably eyes and noses, their size and placing on a piece of furniture can have some rather unfortunate effects if not well considered. SIZE No firm rules govern the choice of knob size. The Shakers rarely used knobs bigger than 1 1/4” diameter on even the largest casework. Other less severe furniture of the same period was commonly outfitted with more comfortable and larger mushroom or bun-shaped knobs. The Sheraton styles of the early 19th century popularized large decorative brass knobs, few of which survived the ravages of use and the changes of taste. By far the most common application for knobs in our day is on built-in cabinetwork. Kitchens have become such an important part of the modern domestic life that a great deal of effort and expense goes into their creation. Even a moderate kitchen can consume fifty or more knobs. If the knob is wrong, it will have ample opportunity to repeat its mistake. Unless your cabinetwork is truly massive you will probably select a knob between 1” and 1 1/2” diameter for your cabinet doors. If you are using knobs on the drawers, make sure they are the same size or bigger than the door knobs. The typical cabinet knob we sell is 1 1/4” diameter. Because wood knobs have less visual mass than metal ones, you will generally want to use a wood knob one size larger than the equivalent metal knob. QUANTITY Quantity only becomes an issue on drawers. Smaller drawers need one knob and larger drawers two, but deciding where the dividing line between small and large is drawn takes thought. An 18” drawer can accommodate either a single knob or two smaller knobs. Any wider and a drawer will feel more comfortable with two knobs and any smaller drawer will only need one. A wide drawer with a single knob is prone to rack when opened, and a drawer fitted with two knobs may rack if only one knob is used to open the drawer. POSITIONING The placing of knobs is crucial to the overall integration of your cabinetwork. When placed with care a knob should blend into its context. Poorly placed knobs act as a visual stumbling blocks to the balance of otherwise well proportioned cabinetwork. If most cabinetwork was on the cutting edge of contemporary design, there would be little point in making blanket rules on knob placement, but the truth is that the vast bulk of new cabinetwork is very traditional in design and seeks to evoke times past. The modern obsession with convenience can lead designers and homeowners to sacrifice all the time and effort they have expended on solid hardwoods, raised panels and custom finishes, and then scatter knobs in the most PAGE 101 Too Wide Too Narrow Correct non-traditional places. Here are a few thoughts that might help. Never place a knob in the corner of a door. Imagine the door length divided into four quarters and try to keep the knob in the middle two. It does nobody any harm to stretch up or down a little. Avoid placing knobs on raised panels. This cannot always be avoided, particularly when the cabinetmaker has seen fit to produce raised panel drawer fronts. A knob should always be positioned a little above center on a drawer front. A centered knob will always appear below center when seen from above. If a drawer is wide enough to need two knobs, as a rule of thumb, they should be set about 1/6 of the drawer length from each end. Take this as a starting point, not a strict rule. MOUNTING Wooden knobs are attached either by a woodscrew from behind or, if provided with a tenon, they are glued in place. Woodscrew attachment is the most popular method though not as secure as glued tenon. Because of wood shrinkage a woodscrew will eventually loosen, and given the human capacity of procrastination, the knob will loosen further over the course of years until one day it will come off in the hands of an unsuspecting visitor. The glued tenon will survive longer but, unless they are sawn or broken off, commits the user to his choice of knob. Metal knobs can be attached either with machine screws from behind or with integral woodscrews. Most cabinet knobs come with a machine screw suitable for 3/4” thick material. If your wood is thicker, it is usually up to you to find suitable longer screws. American made knobs are commonly threaded for 8-32 screws which can easily be found in your local hardware store. Manufacturers of European knobs seem to take pleasure in frustrating customers wherever possible with a wide range of threads from 2mm metric to 1/4” Whitworth. We try our best to supply a suitable screw for your needs. Often, the best solution to an installation problem will be to use ‘Hanger Screws’. These screws look like a machine screw on one end and a wood screw on the other. They are screwed into the back of the knob and the knob is simply screwed into a pilot hole in the wood. This is certainly as secure as any other mounting in hardwoods, but might not hold up against abuse on pine or other softwoods. We can supply hanger screws upon request with most of our knobs. Some of our European knobs come with a long steel bolt and a nut. To install these requires cutting the tread to the appropriate length. I don’t envy anyone installing a kitchen’s worth of these and would refer back to the last paragraph. If these are to be used as supplied, the process is as follows. Locate knob position, then create a counter-bore with a suitable size Forstner bit on the backside to accommodate the nut. Drill the bolt hole and with the bolt not quite fully threaded into the knob, insert the knob into place. Mark the bolt flush with the back surface of the wood. Remove the knob and thread the nut onto the bolt past this point. Now cut the bolt to length. File the bolt end to remove damage and unscrew the nut to repair the threads. Install the knob. While you could possibly avoid the counter-bore on kitchen work, on furniture it should not be ignored. PAGE 102 BRASS CABINET KNOBS All the knobs on this page are mounted by woodscrew. In the case of Code 4 products, the woodscrew is cast in brass as part of the knob, while the Code 1 knobs have a force-fit steel screw. Code 4 Antiqued brass 102KBY9 Code 4 Antiqued brass 102KBY10 Code 1 Polished brass 102KSB1P Antiqued brass 102KSB1A Polished chrome 102KSB1PC Polished nickel 102KSB1PN Satin nickel 102KSB1SN Code 4 Antiqued brass 102KBY8 Code 4 Antiqued brass 102KBY11 Code 1 Polished brass 102KSB2P Antiqued brass 102KSB2A Polished chrome 102KSB2PC Polished nickel 102KSB2PN Satin nickel 102KSB2SN PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 4 Antiqued brass 102KBY7 Code 4 Antiqued brass 102KBY12 Code 1 Polished brass 102KSB3P Antiqued brass 102KSB3A Polished chrome 102KSB3PC Polished nickel 102KSB3PN Satin nickel 102KSB3SN Code 4 Antiqued brass 102KBY13 Code 4 Antiqued brass 102KBY14 Code 1 Code 1 Polished brass Polished brass 102K5P 102K6P Antiqued brass Antiqued brass 102K5A 102K6A Polished chrome Polished chrome 102K5PC 102K6PC Polished nickel Polished nickel 102K5PN 102K6PN Satin nickel Satin nickel 102K5SN 102K6SN Code 1 Polished brass 102K7P Antiqued brass 102K7A Polished chrome 102K7PC Polished nickel 102K7PN Satin nickel 102K7SN WOOD CABINET KNOBS PAGE 103 The wood screw mounted knobs below are drilled to a depth of 3/4” and accept a common #8 woodscrew. We do not include screws with these knobs. Code 10 Birch 103KW8 Code 10 Maple 103KW7 Code 10 Maple 103KW6 Code 9 Walnut Cherry Oak Maple 103KW40 103KW41 103KW42 103KW43 Code 9 Walnut Cherry Oak Maple 103KW70 103KW71 103KW72 103KW73 Code 9 Walnut Cherry Oak Maple 103KW60 103KW61 103KW62 103KW63 Code 9 Walnut Cherry Oak Maple 103KWD40 103KWD41 103KWD42 103KWD43 Code 9 Walnut Cherry Oak Maple 103KWD70 103KWD71 103KWD72 103KWD73 Code 9 Walnut Cherry Oak Maple 103KWD60 103KWD61 103KWD62 103KWD63 Code 10 Maple 103KW5 Code 10 Maple 103KW33 Code 10 Maple 103KW34 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. PAGE 104 WOOD CABINET KNOBS Code 9 Walnut 104KW891 Cherry 104KW892 Oak 104KW893 Maple 104KW894 Pine 104KW895 Mahogany 104KW896 Code 9 Walnut Cherry Oak Maple Pine Mahogany 104KW881 104KW882 104KW883 104KW884 104KW885 104KW886 Code 9 Walnut 104KW871 Cherry 104KW872 Oak 104KW873 Maple 104KW874 Pine 104KW875 Mahogany 104KW876 Code 9 Walnut Cherry Oak Maple Pine Mahogany 104KW861 104KW862 104KW863 104KW864 104KW865 104KW866 Code 9 Pine 104KW908 Code 9 Pine 104KW907 Code 10 Maple 104KW47 Code 9 Walnut Cherry Oak Maple 104KW94 104KW95 104KW96 104KW97 Code 10 Maple 104KW48 Code 9 Walnut Cherry Oak Maple Code 10 Maple 104KW49 104KW90 104KW91 104KW92 104KW93 The wood screw mounted knobs on this page are drilled to a depth of about 3/4” and accept a common #8 or #10 woodscrew. We do not include screws with these knobs. PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. WOOD CABINET KNOBS Code 9 Walnut Cherry Oak Maple Code 9 Walnut Cherry Oak Maple 105KW13 105KW12 105KW17 105KW11 105KW16 105KW15 105KW18 105KW14 Code 9 Walnut Cherry Oak Maple Code 9 Walnut Cherry Oak Maple PAGE 105 Code 9 Maple 105KW80 105KW21 105KW22 105KW23 105KW24 The six wood screw mounted knobs on the left of this page are drilled to a depth of 3/4” and accept a common #8 woodscrew. We do not include screws with these knobs. The two knobs on the right are supplied with screws. Code 9 Maple 105KW81 105KW82 105KW83 105KW84 105KW85 PRODUCT SIZE All products are shown full size over a 1/4” grid. Code 9 Walnut Cherry Oak Maple 105KW123 105KW124 105KW125 105KW126 Code 9 Walnut Cherry Oak Maple 105KW36 105KW37 105KW38 105KW39 Code 9 Walnut Cherry Oak Maple Code 9 Maple 105KWL82 105KW3 105KW2 105KW4 105KW1 MAGPIE HANDLES PAGE 106 These handles are handmade in a local Wilson, WY furniture shop. Code 8 Projection: 3/4” Walnut 106CH31 Maple 106CH32 Cherry 106CH33 Code 8 Projection: 1 1/16” Walnut 106CH21 Maple 106CH22 Cherry 106CH23 PRODUCT SIZE All products are shown full size over a 1/4” grid pattern. Code 8 Projection: 1 1/4” Walnut 106CH11 Maple 106CH12 Cherry 106CH13
