Idaho 100 Profile System - Trimless

advertisement
Idaho 100 Profile System - Trimless
Date: ____________________________ Project: _______________________________
3 9/16”
90mm
Fixture Type: ______________________ Specifier/Rep: __________________________
DIRECT
4 7/16”
112mm
L3ID100-TRI-SYS
DR
Article #
Distribution
Product
L3ID100-TRI-SYS
OP
Distribution Diffuser
DR Direct
OP Opal
Idaho 100
Diffuser
Length
State desired
length
Length
Angle
Couplers
Angle Couplers
(if required)
FC surface 90°
Voltage
Voltage
Inserts
Mounting
Brackets
Accessories
Electrical Options
120V
Linear
LED
277V
LED
Non-Dimming
CC wall to wall/ ceiling 90°
Trimless
Electrical
Linear
L3014 (3000K) 14W/ft 25W non-dimm.
Fluorescent
Non-Dimming
S Standard Output non-dimm.
347V
L3514 (3500K) 14W/ft 60W non-dimm.
H High Output non-dimm.
(Optional)
L3021 (3000K) 21W/ft 100W non-dimm.
Dimming
L3521 (3500K) 21W/ft Dimming
DIM1 0-10V
Fluorescent
DIM1 0-10V (60W)
DIME Lutron Eco System (10%)
S1 T5 SO 1 lamp
DIM2 0-10V (100W)
DIME3 Lutron Eco System 3 Wire (10%)
H1 T5 HO 1 lamp
DIM3 Lutron Hi-Lume A series DIM3D Lutron Hi-Lume 3D (1%)
S2 T5 SO 2 lamp
EM Emergency (Supplied by others) DIM3D3 Lutron Hi-Lume 3 Wire (1%)
H2 T5 HO 2 lamp
other: please specify
DIMEH Lutron Eco System H series (1%)
EM Emergency
other: please specify
Mounting Brackets
Accessories
Ceiling Thickness (Drywall)
Fluorescent Gels
10 10mm (3/8")
R Red
12 12.5mm (1/2")
Y Yellow
15 15mm (5/8")
G Green
B Blue
P Pink
Pp Purple
O Orange
For unique customized profiles please include a layout drawing or description below;
Profile Layout Suggestions
* Include detailed information such as distance between linear lamps, spots and aluminum caps.
* Zaneen will supply submittal drawing for approval once an order is received.
Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request.
For assistance to write your “custom” specification, email your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days.
Zaneen reserves the right to change the specifications and/or materials without notice. Please check www.zaneen.com for the most recent updates.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 1 of 6
Idaho 100 Profile System - Trimless
Date: ____________________________ Project: _______________________________
Fixture Type: ______________________ Specifier/Rep: __________________________
Type Trimless (Non-IC Type)
Rated for Dry or Damp locations (IP20)
Approval Certified by C.S.A. for North American Standards.
Emission Direct.
Efficiency
Acrylic diffuser (snap-in) lens 32%
PROFILE
Measurements w. 112mm (4 7/16”) x ht. 90mm (3 9/16")
Housing Anodized extruded aluminum profile up to 9’-10 2/16” long.
Profiles are joined with a coupler to ensure uniform appearance and
easy installation. White aluminum reflector is used for maximum light
output.
Corners 100% homogeneous appearance. Corners require 90
degree couplers. Lens is created with mitered cut.
Mounting Bracket 135mm (5.3") ceiling space required to
incorporate mounting bracket and screw (self tapping screws
provided must be used). Mounting brackets are located
approximately every 3ft.
Cutout 115mm (4 ½") x profile length+8 mm (5/16")
Ceiling Thickness (Drywall)
Mounting brackets must be specified considering the ceiling
thickness; 10mm(3/8”) or 12.5mm(½”) or 15mm(5/8”).
Frame Alignment Kit comes with the order for easy installation.
INSERTS
Linear
LED
LED 3000K° (14W/ 2184 lm/ft or 21W/ 3276 lm/ft)
LED 3500K° (14W/ 2352 lm/ft or 21W/ 3528 lm/ft)
(LM 79-80)
LED inserts are offered in 3", 6",12" increments. Zaneen will finalize
the actual profile length after calculating the inserts required.
* Please contact Zaneen for other color temperature options.
Fluorescent
Available Configurations
1 lamp flush
T5 SO: 14W, 21W, 28W, 35W / T5 HO: 24W, 39W, 54W
2 lamp flush
T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W
1 lamp overlap (not available for Dark light)
T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W
2 lamp overlap (not available for Dark light)
T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W
Emergency
1 lamp flush
T5 SO: 28W, 35W / T5 HO: 54W
1 lamp overlap (not available for Dark light)
T5 SO: 28W, 35W / T5 HO: 54W
ELECTRICAL
Luminaires are pre-wired with a factory installed branch circuit wiring
and quick-release connectors. Through wiring is used to connect the
luminaires.
BX Cable is connected directly into the fixture.
Power Feed 22mm diameter hole located 2 inches from one end of
the fixture, on top of the profile. If a different location is required,
please specify.
LED Driver Remote driver must be installed into a metal enclosure
(supplied by others). Maximum distance between the power supply
and the last fixture on the circuit is 30' using a 18-gauge wire. For
more than 30', the gauge of the wire must be determined by a
certified professional. The length of the fixture specified must be
considered within the maximum distance of 30’.
Provisions must be made on site for accessibility to the power
supplies.
*Electronic Class II driver, 120V/ 277V/ 347V (optional).
Dimming driver 0-10V (10-100%)
Lutron Hi-Lume A type dimming
Emergency Inverter Compatible To be installed remotely but
provided by others, can be located up to 250’ away from the fixture.
Emergency Circuit Wiring Upon request.
Fluorescent Ballast Electronic high power factor ballast. Specify
120V, 277V, 347V. Ballast is pre-wired with leads to one end of
fixture. Ballast is positioned behind lamp insert and is fully accessible
from below.
0-10V, Lutron 3-wire or Lutron digital dimming options are available.
* Lutron dimming ballast is used as standard , 120V/ 277V/ 347V.
Emergency Ballast To be installed remotely. Only 1 emergency
ballast for 4’ (flush) and/or 5’ (flush or overlap) insert can be integral.
Emergency Circuit Wiring Upon request.
Emergency Testing Switch is to be installed close to the
emergency ballast equipped fixture. An installation kit will be
supplied by Zaneen.
WARRANTY
Zaneen provides a limited warranty from date of purchase to original
purchaser.
LED Inserts : 5 year
Rated for 50,000 hours at 70% lumen output (L70)
LED Driver : 5 year
Fluorescent / Ballast : 5 year
Dimming Ballast : 3 year
12V Transformer : 1 year
Non-Electrical Components : 1 year
Lamp Combination For specific lamp combinations or
configurations, please specify the overall length and attach a sketch
or drawing of the intended configuration. Zaneen will supply
submittal drawings for approval once an order is received.
Zaneen reserves the right to change the specifications and/or materials without notice. Please check www.zaneen.com for the most recent updates.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 2 of 6
Idaho 100 Profile System - Trimless
Date: ____________________________ Project: _______________________________
Fixture Type: ______________________ Specifier/Rep: __________________________
INSERTS
LINEAR INSERTS
Lumens
LED
Color Temp. (K)
Watt
Nominal
Actual
Length
L3014
3000° K
14W / ft
2184 lm/ft
626 lm/ft
3”, 6”,12”
76mm, 152mm, 304mm
L3514
3500° K
14W / ft
2352 lm/ft
696 lm/ft
3”, 6”,12”
76mm, 152mm, 304mm
L3021
3000° K
21W / ft
3276 lm/ft
964 lm/ft
3”, 6”,12”
76mm, 152mm, 304mm
L3521
3500° K
21W / ft
3528 lm/ft
1071 lm/ft
3”, 6”,12”
76mm, 152mm, 304mm
LED
LED
FLUORESCENT
Flush
S1
H1
Standard Output T5: 14W, 21W, 28W, 35W
High Output T5: 24W, 39W, 54W
S2
H2
Standard Output T5: 21W, 28W, 35W
High Output T5: 24W, 39W, 54W
Overlap
Lamp Insert Position
1-Lamp
2-Lamp
Emergency: Standard Output T5: 21W, 28W, 35W
High Output T5: 39W, 54W
Zaneen reserves the right to change the specifications and/or materials without notice. Please check www.zaneen.com for the most recent updates.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 3 of 6
Idaho 100 Profile System - Trimless
Date: ____________________________ Project: _______________________________
Fixture Type: ______________________ Specifier/Rep: __________________________
ELECTRICAL OPTIONS
LED
DRIVERS
Non-Dimm/Dimmable
Max. Wattage
25W
60W
100W
non-dimm
non-dimm
non-dimm
25W
60W
100W
DIM1
DIM2
0-10V dimming
0-10V dimming
60W
100W
DIM3
Lutron Hi-Lume A Series
Voltage
Dimensions (mm/inch)
120-277V / 24Vdc
347V (*Optional)
120-277V / 24Vdc
40W
L.318x W.102x H.50.8mm
/L.12 1/2”x W.4”x H.2”
L.318x W.102x H.50.8mm
/L.12 1/2”x W.4”x H.2”
FLUORESCENT
BALLASTS
Dimensions (mm/inch)
Voltage
Non-Dimm/Dimmable
T5SO /Wattages
T5HO /Wattages
S
H
Standard Output non-dimm
High Output non-dimm
14-21-28-35W
---
--24-39-54W
120V-277V
347V (*Optional)
INTEGRAL
DIM1
DIME
DIME3
DIM3D
DIM3D3
DIMEH
0-10V dimming
Lutron Eco System(10%)
Lutron Eco System 3 wire (10%)
Lutron Hi-Lume 3D (1%)
Lutron Hi-Lume 3 wire (1%)
Lutron Eco System H series (1%)
14-21-28W
14-21-28-35W
14-21-28-35W
14-21-28W
14-21-28W
14-21-28W
54W
24-39-54W
24-39-54W
24-39-54W
24-39-54W
24-39-54W
120V-277V
347V (*Optional)
INTEGRAL
EM
Emergency
90 minutes
operation
21-28-35W
39-54W
L.571.5x W.30x H.30mm
/L.22 1/4”x W.1 3/16”x H.1 3/16”
120V-277V
COMPONENTS
*max. 3000mm lengths
Linear
Coupler
Diffuser
*max. 3000mm lengths
90° Corner
Coupler
80
35
Profile
195
195
90° Vertical
Coupler
100
90
End Cap
Mounting
Bracket
107
10 0
Frame
Alignment Kit
1 pc for every 10 runs
Zaneen reserves the right to change the specifications and/or materials without notice. Please check www.zaneen.com for the most recent updates.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 4 of 6
Idaho 100 Profile System - Trimless
Date: ____________________________ Project: _______________________________
Fixture Type: ______________________ Specifier/Rep: __________________________
WIRING DIAGRAMS FOR LINEAR LED
0-10V DIMMING
RED/WHITE
+
0-10Vdc
LINE
LINE
VOLTAGE
GRAY
_ PURPLE
0-10V DRIVER
*DIMMER
RED
BLUE
NEUTRAL
24Vdc
+
_
*Zaneen recommends Diva 0-10V (DVTV) dimmer.
* This diagram applies only to Diva 0-10V (DVTV) dimmer.
LED LIGHT
ENGINE
LUTRON ECO SYSTEM DIGITAL DIMMING
LINE
LINE
VOLTAGE
BLACK
NEUTRAL
WHITE
GROUND
GREEN
HI-LUME
A SERIES
+ RED LED LIGHT
_ BLACK ENGINE
GROUND
E1 - PURPLE 1
LUTRON
ECOSYSTEM BUS
E2 - PURPLE 2
LUTRON 3-WIRE DIMMER CONTROL
LINE
BLACK
3-WIRE
NEUTRAL
CONNECTION
DIMMER
RED
BLACK
YELLOW OR ORANGE
ORANGE
DIMMING DRIVER
WHITE
LINE
VOLTAGE
GREEN
+
_
LED LIGHT
ENGINE
WHITE
NEUTRAL
Zaneen reserves the right to change the specifications and/or materials without notice. Please check www.zaneen.com for the most recent updates.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 5 of 6
Idaho 100 Profile System - Trimless
Date: ____________________________ Project: _______________________________
Fixture Type: ______________________ Specifier/Rep: __________________________
WIRING DIAGRAMS FOR FLUORESCENT T5 SO AND HO
0-10V DIMMING
RED/WHITE
0-10Vdc
LINE
VOLTAGE
LINE
0-10V BALLAST
+
GRAY
_
PURPLE
*DIMMER
RED
BLUE
NEUTRAL
24Vdc
FLUORESCENT
FIXTURE
*Zaneen recommends Diva 0-10V (DVTV) dimmer.
* This diagram applies only to Diva 0-10V (DVTV) dimmer.
LUTRON ECO SYSTEM DIGITAL DIMMING
E1 - PURPLE 1
LINE
LINE
VOLTAGE
E2 - PURPLE 2
BALLAST
LUTRON
ECOSYSTEM BUS
NEUTRAL
FLUORESCENT
FIXTURE
LUTRON 3-WIRE DIMMER CONTROL
LINE
BLACK
3-WIRE
NEUTRAL
CONNECTION
DIMMER
RED
BLACK
YELLOW OR ORANGE
ORANGE
NEUTRAL
DIMMING BALLAST
WHITE
LINE
VOLTAGE
GREEN
LINE
FLUORESCENT
FIXTURE
WHITE
NEUTRAL
Zaneen reserves the right to change the specifications and/or materials without notice. Please check www.zaneen.com for the most recent updates.
30 Tycos Drive, Toronto, Ontario, Canada M6B 1V9 PH: 800.388.3382 / 416.247.9221 FAX: 416.247.9319 www.zaneen.com tech@zaneen.com
Page 6 of 6
Download