211
System sections 50 mm
Structural profile options
Assembly options
Polygon glazing system
Cover/Pressure profile options
Building connections
225
239
242
250
254
260
System sections 56 mm
Structural profile options
Assembly options
Polygon glazing system
Cover/Pressure profile options
Building connections
271
280
282
287
291
297
All illustrations in 75% or 50%.
2011
209
THERM+ A-I
System benefits
System sections
Content
210
2011
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Technology in detail
THERM+ A-I
– System widths 50 and 56 mm.
– All profiles can be used as well for mullions as
for transoms.
– Maximal energy saving by variable thermal
insulation with insulating block options up to
Uf= 0.95 W/(m²K) including screw influence.
– Vertical curtain wall and glass roof up to
2° roof inclination.
– Infill thickness from 6 to 64 mm.
– Dissipating for very high glass weights up to
600 kg.
– Construction as polygon curtain wall up to 45°
with system accessoiries.
– Wide selection for structural profiles
(identical for mullion and transom):
– rectangular profiles
– expansion profiles
– profiles in tee-shape
– Perfect optic also at flush transom through
sharp-edged cross sections.
– High structural values due to optimised profile
desgin.
– Vertical T-connection technology in
various options.
– Efficient and simple processing.
– Integrated drainage at the continuous gasket
in three levels.
– Extensive system accessories.
2011
211
System sections
■ Features basic system
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Technology in detail
■ Pressure and cover profiles
for curtain wall and roof light
applications
– Wide selection of various types for both
system widths.
– Individual solutions for objects in a short time
available.
– Visually especially attractive flat pressure
profile with an offset of only 4 mm above the
glass surface.
– Special accessories for optimum sealing of the
cross points.
■ Base profiles for mullion and
transom
– All profiles can be used as well for mullions as
for transoms.
– Simple production without additional notches
– High strucural values due to optimised profile
design.
– Gasket holding fixture for easy fixing.
– Object–based individual structural profile
options.
– Rectangular box profiles, system widths 50
and 56 mm, depths from 75 to 200 mm.
– Expansion profiles, system widths 50 and 56
mm, depths from 75 to 200 mm.
– Profiles in tee-shape, system widths 50 mm
and depth from 50 to 200 mm.
■ T-connection technology
– Various options for different assembly
methods.
– German general approval DiBt,
Berlin No. Z.-14.4-461.
– All profiles can be used as well for mullions
as for transoms.
– High vertical load up to 400 kg with addtional
cross glass carrier up to max. 600 kg.
– Pre-fabrication of transportable units possible.
– Easy and quick posterior integration of
transom.
– T-connector also sold by meters for in-house
cutting and also available as insertion profile
for structural reinforcement.
212
2011
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
THERM+ - Certified quality, CE-conform and tested
THERM+ quality you can rely upon
No.
Test type/Standard
Classification/Result
Testing institute/Test no.
4.1
Wind resistance (EN 12179)
Permissible load 1,875 KN/m2
Increased load 2,813 KN/m2
ift Rosenheim
No. 10-000502
4.3
Resistance against impact (if specially requesed) (EN 14019)
Interior I5
Exterior E5
ift Rosenheim
No. 10-000502
4.4
Air permeability (EN 12153)
AE (>600)
ift Rosenheim
No. 10-000502
4.5
Water penetration (EN 12155)
RE 1650
ift Rosenheim
No. 10-000502
4.7
Thermal transmittance (UCW vallue)
(EN 13947)
Calculation with data from RAICO Uf
value tables
EN 13947 (Calculation)
THERM+ A-I
■ Product standard for curtain walling EN 13830:
Features and classification for CE-Labelling
■ Notice
– All features can be used for CE-Labelling by the manufactures of curtain walls. It is mandatory that only RAICO products has to be
used and the production process has to be monitored by an in-house production control system. The whole production process
has to be compliant to the RAICO assembly instructions.
– Depending on the panel dimensions of the curtain wall and the structural connections the sound insulation value has to be calculated separately. The system testimonial can only be used for an overview.
– Depending on the different systems options and the glass thickness the Uf-value can be adapted step-by-step. The exacts values
based on DIN EN ISO 10077-2 are documented in the thermal protection documentations by RAICO.
■ Additional approvals and certifications
Test
Result
Description
German general approval:
clamping joint for the curtain
wall system
– Screw channel of mullion-transom
profiles
– Pressure profiles
German general approval for the
clamping joint for the curtain wall
system THERM+ A-I aluminium
curtain wall
– Screws
Testing institute/Test no.
DIBt, Berlin
No. Z-14.4-454
German general approval
Connection types with maximal
mullion-transom-connections vertical load
(T-connections)
German general approval for the
DIBt, Berlin
T-connections THERM+ A-I alumi- No. Z-14.4-461
nium curtain wall
Glass roof with 2° inclination: Class AE including accessoiries
Air permeability
(e. g. sun protection fixation)
Test of airpermeability after EN
12153:2000-06
ift Rosenheim
No. 10527436
Glass roof with 2° inclination: Class RE 1050 including accessoiWater penetration
ries (e. g. sun protection fixation)
Test of water penetration after EN
12155: 2000-06
ift Rosenheim
No. 10527436
Glass roof with 2° inclination: Test load 2000 Pa, safety 3000 Pa
Wind resistance
(e. g. sun protection fixation)
Test of wind resistance to windload after EN 12579:2000-06
ift Rosenheim
No. 10527436
Burglar prevention
Resistance class WK 2 (EF1) for
system widhts 50 and 56 mm
Test THERM+ A-I after DIN V
ENV 1627 and DIN V 18054
ift Rosenheim
No. 25536302
Burglar prevention
Resistance class WK 3 (EF2) for
system widhts 50 and 56 mm
Test THERM+ A-I after DIN V
ENV 1627 and DIN V 18054
ift Rosenheim
No. 25536301
Fall protection
Criteria of TRAV
(technical rules for fall proof glazing)
fulfilled
TRAV, figure 6:
criteria fulfilled
2011
213
System sections
Extensive product tests with excellent results confirm the high quality in practical applications of the THERM+ aluminium curtain wall.
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Curtain wall options/drainage system
■ Structural Glazing SG2
– System widths 50 or 56 mm.
– Glazing system for optical exclusive
SG-curtain wall.
– Maximum thermal insulation by special
insulating block SG.
– Simple and economic processing.
– Without visible physcial protections up to 8 m
assembly height.
■ Burglar proof curtain wall and
roofs WK2/WK3
– System widths 50 or 56 mm.
– Resistance class WK2 and WK3
permitted.
– Simple processing.
– Identical technology to the basic system.
■ Drainage system
– The drainage flute of the
mullion and transom gasket is
arranged in various levels.
– In all THERM+ systems the
ventilation and drainage
principle is so designed that a
controlled condensate removal
from transom to the mullion
rebate is secured via interior
gaskets.
214
2011
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Gasket options
THERM+ A-I
– Various exterior gaskets and insulating block
options available.
Standard exterior gasket
– Gradual adaptation of the insulation value.
– Maximum thermal insulation up to
Uf= 0.80 W/(m²K) including screw influence.
Insulating block 9
– Economic solution.
Insulating block 21
Insulating block P
■ Transom and mullion gaskets
– Optimised shape for maximum thermal
insulation and efficient processing.
– Complete covering and sealing of the base
prof ile.
Mullion gasket
Transom gasket
– Perfect and easy fitting on the structural profile
(without silicone).
– Two options of gaskets with flaps for transom
and base drainage as well as draining within
the continuous gasket at the structural
connections.
Base transom gasket, flap
Gasket for transom, flap
– Reliable drainage in two or three levels
by simply notching.
– Proved up to 2° roof inclination.
– Special accessories for all applications,
e. g. transom and mullion sealing elements.
Polygon gasket
Mullion gasket
Single glazing
Expansion mullion gasket
2011
215
System sections
■ Exterior gasket
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Expansion profiles
■ Assembly technology in detail
– Maximal, glazing finished pre-assembly of complete
mullion-transom-elements.
– Easy plug-in system using half of mullion gasket for pressing
to the aluminium expansion profile. Plastic cover profile for
pressing to the gasket.
– Minimal installation costs without screws or special tool on
the construction site:
– Connecting the elements to the building.
– Pin up the KS-cover profiles.
– Inserting the glass or infill panels.
– Glazing with the pressure profiles which are preassembled and eqipped with exterior gaskets or
insulating block.
– All features as density, thermal insulation and easy handling
and assembling identical to the base system.
KS-cover profile
half-mullion gasket
216
2011
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
T-connector-options
THERM+ A-I
– Various options for different assembly
methods.
– German general approval DiBt,
Berlin No. Z.-14.461.
– All profiles can be used as well for mullions
as for transoms.
– High vertical loads up to 400 kg with additional
cross glass carrier up to max. 600 kg.
– Prefabrication of solid, transportable elements
possible.
■ Variable T-connector
– Use for transoms which are not in an angle of
90° with the mullion.
– Variable connections in angles from 35° to 90°.
– Flexible and reliable solution.
■ T-connector set with spring bolt
– Use for posterior external transom assembly.
– Simply assembly:
– Two connectors units which are equipped
with spring bolts are fixed in the transom
profile.
– Transom can be inserted form the interior
side of the curtain wall.
– Independent adjustment in the correct
position.
– Screw effects pressure on the transom
against the mullion.
– Perfect transom joint with simple
and efficient technology.
2011
217
System sections
■ T-connector 25 to 200
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
T-connector-options
■ T-connectorset N
– Use for posterior internal transom
assembly.
– Simple assembly:
– Preparing the transom profile with
a notch.
– Positioning the transom.
– Move and fix with screws of the
including connection component.
– Perfect transom joint with simple and
efficient technology.
– No part can get lost in the transom.
– Posterior dismantling of the transom
is possible.
■ T-connector for expansion profiles
– Use for expansion profiles.
– Various options for different assembly
methods.
– Direct screwing of the transom from the inside
of the expansion mullion.
– Depending on the glass weight
the T-connectors 25 to 200 can also be used.
218
2011
THERM+ A-I
System benefits
THERM+ A-I
■ T-connector set D 50 / D 56
expansion transom
– Alternative to expansion mullion.
– Expansion transom plates take up the
movements.
– Assembly identical to T-connectors 25 to 200.
■ T-connectors in tee-shape
– Use for profiles in tee-shape.
– Efficient and reliable assembly method.
– For a unilateral connection with only one
transom and for a cruciform connection with
two transoms connection pins are available.
– Simple screwing of the connection pins.
– Notching and screwing of the
transom-T-profile at the joint.
– Drilling or thread cutting
are not necessary.
■ T-connector set TR
– Use for profiles in tee-shape with rectangular
transoms for the base and ceiling connections.
– Connector is longer and notched
2011
219
System sections
Aluminium curtain wall 50/56 mm
T-connector-options
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Isothermal lines
Especially for aluminium curtain walls and conservatories it is essential for long term function and maximum satisfaction of
the clients to offer a well-performing thermal insulation and an optimized isothermal line. Only high quality systems which
correspond to both requirements can avoid the formation of condensate.
■ Isothermal lines
– Double glazing with Ug=1.1 W/(m2K) and acrylic
spacer.
– Already with standard exterior gaskets the
10°C- isothermal line remains completely within
the system.
– Condensate is avoided efficiently.
– Individual adaption at higher risk of
condensation is possible (e. g. conservatories
and swimming pools).
■ Formation of condensate
– The humidity in the room can no longer be absorbed by the air.
– Drop of humidity on building components with
low surface temperature.
– Movement of the drop formation of insulating
glass towards the area of the spacer an the
frame of the curtain wall system.
THERM+ 50 A-I
with acrylic spacer
Due to the outstanding thermal insulation
already with standard gaskets as well as
the insulating effect of acrylic spacers the
isothermal line does not touch the surface
of the structure.
– Appearing of condensate at standardized conditions of 50% humidity and 20°C temperature
on surfaces with a temperaure of 10°C.
■ Influence of the curtain wall system
– The surface temperature on the inside of the
curtain wall system does not decrease below
10°C even when the exterior temperature is
10°C below zero.
– 10°C-isothermal line of the THERM+ system
remains completely within the system and
condensate is efficiently avoided.
■ Influence of the glass spacer
– Besides the thermal insulation of the curtain
wall system the type of spacer and glass edge
is another important factor.
– The spacer which is a thermal bridge transfers
temperatures deep into the frame of the curtain
wall system.
– Use of glass spacers which offer a maximum
thermal insulation (e. g. acrylic or steel).
220
2011
THERM+ 50 A-I
with aluminium spacer
Here the isothermal line is less advantageous
due to the influence of the aluminium spacer.
THERM+ A-I
System benefits
THERM+ A-I
The ventilation and the condensate removal of the
glazing rebate is effected via the four corners of
every infill unit in the mullion profiles and across an
on-site adapter construction.
■ Technical information
– T44 = Foil connection behind
drainage level
– T45 = Collateral pressure
compensation
– T48 = Ventilation
– T49 = Ventilation
– T138 = Maximum 8 m resp.
maximum 8 panels
– T139 = All other 8 m resp. 8 panels
Z.-Nr.: KA-0100
2011
221
System sections
Aluminium curtain wall 50/56 mm
Ventilation options
Options I a: Pressure compensation via mullion-connection below/on top
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Ventilation options
Option I b: Pressure compensation via mullion and synthetic sealing piece
The ventilation and the condensate removal of the
glazing rebate is effected via the four corners of
every infill unit in the mullion profiles and addtional
with a sealing piece via an opening of pressure
profiles in the mullion area.
Synthetic sealing piece:
System widths 50 mm:
No. 167140 PU = 10 pieces
System widths 56 mm:
No. 167145 PU = 10 pieces
■ Technical information
– T44 = Foil connection behind
drainage level
– T45 = Collateral pressure
compensation
– T48 = Ventilation
– T49 = Ventilation
– T138 = Maximum 8 m resp.
maximum 8 panels
– T139 = All other 8 m resp.
8 panels
222
2011
Z.-Nr.: KA-0102
THERM+ A-I
System benefits
THERM+ A-I
An additional opening result from a transom
width of 1200 mm, two additional openings
result from a transom width of 1800 mm in the
pressure and cover profiles (options II a and II b).
The number of openings depends on the transom
length, the individual project and glazing
requirements and must be determined in
accordance with the glass supplier.
T121
T122
■ Technical information
– T121 = Option II a
– T122 = Option II b
Z.-Nr.: KA-0101
2011
223
System sections
Aluminium curtain wall 50/56 mm
Ventilation options
Option II: Pressure compensation of extra large transom via pressure and cover profiles
THERM+ A-I
System benefits
Aluminium curtain wall 50/56 mm
Interior gasket design
3 drainage levels
■ Technical information
– T38 = Level 2
– T39 = Level 3
– T40 = Level 1
– T151 = Interior gasket E3
– T152 = Interior gasket E2
– T153 = Interior gasket E1
– T159 = Interior gasket E2 with flap
224
2011
Z.-Nr.: K-0011
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Certified passive house curtain wall with insulating block P 50/39
Mullion section/transom section 50 mm
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/39
168514
50 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0085
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x65
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 47 to 48
162090
012125
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
2011
10 pc(s)
225
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Insulating block P 50/19
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– The type of insulating block P depends on the infill
thickness:
24 to 29 mm: insulating block P 50/19, No. 168509
30 to 43 mm: insulating block P 50/25, No. 168510
44 to 52 mm: insulating block P 50/39, No. 168514
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/19
168509
50 m
– Uf-values see chapter thermal insulation.
■ Gaskets
– T12 = Depths from 25 mm
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
226
2011
Z.-Nr. AI-0081
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Insulating block 21
Mullion section/transom section 50 mm
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block 50/21
150605
50 m
■ Accessories
Article
Z.-Nr. AI-0094
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x45
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 27 to 28
162040
012115
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
2011
10 pc(s)
227
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Insulating block 9
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block 50/9
151010
50 m
■ Accessories
Article
228
2011
Z.-Nr. AI-0015
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Standard exterior gasket
Mullion section/transom section 50 mm
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0001
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
2011
10 pc(s)
229
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Certified passive house curtain wall with insulating block P 50/39 and structural T-profile
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Uf-values see chapter thermal insulation.
– T1 = Depths from 50 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/39
168514
50 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
230
2011
Z.-Nr. AI-0085a
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x65
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 47 to 48
162090
012125
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Insulating block P and T-Profile
Mullion section/transom section 50 mm
Article
– The type of insulating block P depends on the infill
thickness:
24 to 29 mm: insulating block P 50/19, No. 168509
30 to 43 mm: insulating block P 50/25, No. 168510
44 to 52 mm: insulating block P 50/39, No. 168514
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block P 50/19
168509
50 m
– Uf-values see chapter thermal insulation.
■ Gaskets
– T1 = Depths from 50 mm
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0082
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
2011
10 pc(s)
231
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Insulating block 21 and structural T-profile
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Uf-values see chapter thermal insulation.
– T1 = Depths from 50 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block 50/21
150605
50 m
■ Accessories
Article
232
2011
Z.-Nr. AI-0022
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x45
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 27 to 28
162040
012115
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Insulating block 9 and structural T-profile
Mullion section/transom section 50 mm
Article
– Uf-values see chapter thermal insulation.
– T1 = Depths from 50 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
■ Gaskets
Article
No.
PU
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Insulating block 50/9
151010
50 m
■ Accessories
Article
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
110305
Z.-Nr. AI-0016
2011
233
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Standard exterior gasket with structural T-profile
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Uf-values see chapter thermal insulation.
– T1 = Depths from 50 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
234
2011
Z.-Nr. AI-0002
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 50 mm
90°
Aluminium curtain wall 50/56 mm
Corner mullion, 90° angle, vertical
System width 50 mm
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
perforated
118005
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
227010
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Compensation gasket 2
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
Z.-Nr. AI-0157
No.
PU
012114
100
pc(s)
100
pc(s)
908118
2011
235
THERM+ A-I
Article
System sections
■ Profiles
THERM+ A-I
System sections 50 mm
90°
Aluminium curtain wall 50/56 mm
Corner mullion, 90° angle, vertical
System width 50 mm
■ Profiles
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
perforated
118005
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
227010
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Compensation gasket 2
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
236
2011
Z.-Nr. AI-0158
No.
PU
012114
100
pc(s)
100
pc(s)
908118
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Corner mullion for variable angles, vertical
System width 50 mm
Article
No.
PU
Cover profile 50/15
013003
6m
Structural profile 50/75
110010
6m
Pressure profile 47
perforated
118005
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
150005
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
Z.-Nr. AI-0159
No.
PU
012114
100
pc(s)
100
pc(s)
908118
2011
237
THERM+ A-I
■ Profiles
– T123 = vapour-tight membrane no. 014010
System sections
■ Technical information
THERM+ A-I
System sections 50 mm
Aluminium curtain wall 50/56 mm
Saddle roof, ridge solution
System width 50 mm
■ Technical information
■ Profiles
– T123 = vapour-tight membrane no. 014010
Article
No.
PU
013300
6m
Structural profile 50/25
110003
6m
Connection profile 39/22
168021
6m
No.
PU
Gasket for transom 50
150010
20 m
Gasket for pressure
profile 2
220205
100 m
Compensation gasket 6
227020
100 m
Pressure profile 50/3
■ Gaskets
Article
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
238
2011
Z.-Nr. AI-0160
No.
PU
012114
100
pc(s)
100
pc(s)
908118
THERM+ A-I
Structural profile options
Aluminium curtain wall 50/56 mm
Overview structural profiles 50 mm
Mullion section 50 mm
Article
No.
PU
– Structural reinforcement with insertion profiles
no. 119005 to 119035 or conventional steel profiles.
Cover profile 50/15
013003
6m
Structural profile 50/25
110003
6m
Structural profile 50/75
110010
6m
Structural profile 50/100
110015
6m
Structural profile 50/125
110020
6m
Structural profile 50/150
110025
6m
Structural profile 50/175
110030
6m
Structural profile 50/200
110035
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150005
20 m
– T-connectors see chapter assembly options/
connecting technology.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
■ Accessories
Article
Pan head tapping screw
5.5x42
No.
Z.-Nr. AT-0001
No.
PU
012114
100
pc(s)
Statical values
Ix cm4
Iy cm4
110003
8.63
11.00
110005
34.35
19.26
110010
88.65
26.61
110015
170.10
32.75
110020
288.93
39.14
110025
439.56
45.65
110030
627.60
52.23
110035
1017.25
80.11
2011
239
THERM+ A-I
■ Profiles
– For mullions and transoms.
System sections
■ Technical information
THERM+ A-I
Structural profile options
Aluminium curtain wall 50/56 mm
Overview expansion profiles 50 mm
System width 50 mm
■ Technical information
■ Profiles
– For expansion mullions.
Article
No.
PU
– Structural reinforcement with insertion profiles
no. 119115 to 119125.
Cover profile 50/15
013003
6m
Expansion structural
profile 50/75 left
Expansion structural
profile 50/75 right
Expansion structural
profile 50/100 left
Expansion structural
profile 50/100 right
Expansion structural
profile 50/125 left
Expansion structural
profile 50/125 right
Expansion structural
profile 50/150 left
Expansion structural
profile 50/150 right
Expansion structural
profile 50/200 left
Expansion structural
profile 50/200 right
Pressure profile 47
perforated
110160
6m
110161
6m
110165
6m
110166
6m
110170
6m
110171
6m
110175
6m
110176
6m
110185
6m
110186
6m
118005
6m
168201
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
– Consisting of 1x profile L and 1x profile R and
2x gasket for expansion profile.
– T-connectors see chapter assembly options/
connecting technology.
Fixation profile 18/14 I
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50 H
150305
40 m
Gasket for expansion mullion
152005
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
No.
240
2011
Z.-Nr. AT-0002
No.
PU
012114
100
pc(s)
Statical values
Ix cm4
Iy cm4
110160
53.87
8.66
110161
30.13
3.28
110165
106.47
9.81
110166
64.30
4.14
110170
183.14
10.90
110171
116.86
5.00
110175
287.09
11.94
110176
190.32
5.86
110185
693.67
15.51
110186
456.29
9.22
THERM+ A-I
Structural profile options
Aluminium curtain wall 50/56 mm
Overview structural T-profiles 50 mm
System width 50 mm
Article
No.
PU
– Structural reinforcement with conventional steel
profiles.
Cover profile 50/15
013003
6m
Structural profile T 50/50
110305
6m
Structural T-profile 50/75
110310
6m
Structural T-profile
50/100
Structural profile T
50/125
Structural T-profile
50/150
Structural T-profile
50/200
Pressure profile 47
perforated
110315
6m
110320
6m
110325
6m
110335
6m
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150005
20 m
– T-connectors see chapter assembly options/
connecting technology.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 50
■ Accessories
Article
Pan head tapping screw
5.5x42
No.
110305
Z.-Nr. AT-0003
No.
PU
012114
100
pc(s)
Statical values
Ix cm4
Iy cm4
33.07
9.18
110310
81.16
9.60
110315
158.66
10.03
110320
269.50
10.46
110325
417.35
10.88
110335
910.76
12.37
2011
241
THERM+ A-I
■ Profiles
– For mullions and transoms.
System sections
■ Technical information
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Gasket for transom with flap between mullions
Transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Available for all insulating blocks.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150015
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50
with flap
■ Accessories
Article
242
2011
Z.-Nr. AI-0003
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Continuous base gasket with flap
Transom section 50 mm
Article
– Available for all insulating blocks.
– Base gasket up to 64 mm infill thickness.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
Connection profile 36/22
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
50 with flap
150020
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0003a
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for base
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
152071
10 pc(s)
162035
10 pc(s)
2011
243
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Gasket for transom between mullions
Transom section 50 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Available for all insulating blocks.
– T1 = Depths from 50 mm
No.
PU
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150015
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 50
with flap
■ Accessories
Article
244
2011
Z.-Nr. AI-0004
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Continuous base gasket with flap
Transom section 50 mm
Article
– Available for all insulating blocks.
– Base gasket up 64 mm infill thickness available.
– T1 = Depths from 50 mm
No.
PU
Cover profile 50/12
013004
6m
Structural profile T 50/50
110305
6m
Pressure profile 47
perforated
118005
6m
Connection profile 36/22
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
50 with flap
150020
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0004a
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for base
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
012114
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
152071
10 pc(s)
162035
10 pc(s)
2011
245
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Connection of ventilated/non-ventilated curtain wall
Transom section 50 mm
■ Profiles
Article
No.
PU
Cover profile 50/12
013004
6m
Structural profile 50/100
110015
6m
Pressure profile 47 perforated
118005
6m
Connection profile 45/42
168060
6m
■ Gaskets
Article
No.
PU
Gasket for pressure profile 3
011070.LI
100 m
Gasket for pressure profile 3
011070.RE
100 m
Gasket for pressure profile 7
011074
100 m
Gasket for transom 50 with flap
150015
20 m
■ Accessories
Article
246
2011
Z.-Nr. AI-0150
No.
PU
Flat fillister head screw 5.5x16
012097
100 pc(s)
Pan head tapping screw
5.5x42
Sealing piece for pressure
profile 50
012114
100 pc(s)
014035
10 pc(s)
Cross point sealing plate 50
016050
10 pc(s)
Sealing piece for transom 50
152010
100 pc(s)
Sealing piece for transom
152050
100 pc(s)
Glass carrier 25 to 26
162035
10 pc(s)
Pan head tapping screw
4.8x16
230150
100 pc(s)
Connection spring 39/25
915500
10 pc(s)
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Interior compensation of varying infill thicknesses
Mullion section/transom section 50 mm
Article
No.
PU
Cover profile 50/15
013003
6m
– T-connectors see chapter assembly options/
connecting technology.
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Compensation profile
7/23
Pressure profile 47
perforated
116005
6m
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
Interior gasket 3
220320
100 m
– T12 = Depths from 25 mm
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0072
No.
PU
Flat fillister head screw
5.5x19
Pan head tapping screw
5.5x52
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012103
100
pc(s)
100
pc(s)
Glass carrier 33 to 34
162055
10 pc(s)
Fixture spring 30/25/5
915015
50
pc(s)
012118
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
2011
247
THERM+ A-I
■ Profiles
– Difference between the glass thicknesses
from 10 to 24 mm can be compensated
without exterior glass offset.
System sections
■ Technical information
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Single glazing
Mullion section/transom section 50 mm
■ Technical information
■ Profiles
– Depending on the infill thickness for the following
gaskets for pressure profile must be used:
infill thickness 10 to 11 mm: gaskets for pressure
profile 5 mm, no. 011073
infill thickness from 12 mm: gaskets for pressure
profile 3 mm, no. 011070
Article
– T-connectors see chapter assembly options/
connecting technology.
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50
150005
20 m
Gasket for transom 50
150010
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
248
2011
Z.-Nr. AI-0007
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x30
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 10 to 14
162005
012109
014035
10 pc(s)
016050
10 pc(s)
152010
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
Assembly options
Aluminium curtain wall 50 mm
Single glazing and interior gasket 26 mm
Mullion section/transom section 50 mm
Article
– T12 = Depths from 25 mm
No.
PU
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Structural profile 50/50
110005
6m
Pressure profile 47
perforated
118005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 50/26
150461
20 m
Interior gasket 50/26 E3
150462
20 m
Interior gasket 50/26 E2
150463
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x32
Sealing piece for
pressure profile 50
Cross point sealing plate
50
Sealing piece for
transom 50/26
Sealing piece for
transom 50/26 E2
Z.-Nr. AI-0114
No.
PU
012110
100
pc(s)
014035
10 pc(s)
016050
10 pc(s)
152007
100
pc(s)
100
pc(s)
152011
Glass carrier 10 to 13
167556
10 pc(s)
Special flat fillister head
screw 5.5x19
908308
100
pc(s)
2011
249
THERM+ A-I
■ Profiles
– Infill thickness from 4 to 20 mm.
System sections
■ Technical information
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle 50 mm
■ Technical information
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
Article
No.
PU
Cover profile 50/15
013003
6m
Pressure profile 47
perforated
118005
6m
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 50
150005
20 m
■ Gaskets
Article
■ Accessories
Article
Pan head tapping screw
5.5x45
250
2011
Z.-Nr. AI-0027
No.
PU
012115
100
pc(s)
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system 8° to 15°
Mullion section exterior angle 50 mm
Article
No.
PU
– Glass bite (A and B) must be min. 12 mm. The
distance between glass edge and gasket cap
(C) has to be min. 3 mm.
Cover profile 56/15
013023
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011810
100 m
150040
20 m
– Please note the glass tolerances!
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for mullion 50
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x45
Z.-Nr. AI-0123
No.
PU
012115
100
pc(s)
2011
251
THERM+ A-I
■ Profiles
– Face width of cover profile depends on angle
and infill thickness.
System sections
■ Technical information
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system 8° to 20° and 21° to 33° with polygon interior and exterior gasket
Mullion section exterior angle 50 mm
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
No.
PU
Cover profile 50/15
013003
6m
Insertion profile 8° to 20°
013800
6m
Insertion profile
21° to 33°
Pressure profile 47
perforated
013801
6m
118005
6m
No.
PU
011805
100 m
150040
20 m
150045
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 50
polygonal 8° to 20°
Gasket for mullion 50
polygonal 21° to 33°
■ Accessories
Article
Pan head tapping screw
5.5x52
Pan head tapping screw
5.5x55
252
2011
Z.-Nr. AI-0029
No.
PU
012118
100
pc(s)
100
pc(s)
012119
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system 34° to 45° with polygon interior and exterior gasket
Mullion section exterior angle 50 mm
Article
No.
PU
Cover profile 50/15
013003
6m
Insertion profile
34° to 45°
Pressure profile 47
perforated
013802
6m
118005
6m
No.
PU
011805
100 m
150050
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 50
polygonal 34° to 45°
■ Accessories
Article
Pan head tapping screw
5.5x60
Z.-Nr. AI-0031
No.
PU
012123
100
pc(s)
2011
253
THERM+ A-I
■ Profiles
– Insulating strips available on demand.
System sections
■ Technical information
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Cover profile options clipped
Mullion section 50 mm
■ Technical information
■ Profiles
– Slipping down of the cover profiles must be
prevented.
Article
No.
PU
– For more cover profiles, end caps and belay
sheet see product range.
Cover profile 50/15
013003
6m
Cover profile 50/12
013004
6m
Cover profile 50/25
013005
6m
Cover profile 50/30
013200
6m
Cover profile 50/25
013201
6m
Cover profile 50/90
013202
6m
Cover profile 50/20
013210
6m
Cover profile 50/15
013510
6m
Cover profile 50/25
013512
6m
Pressure profile 47
perforated
118005
6m
254
2011
Z.-Nr. AI-0039
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Pressure profile options visible screwed
Mullion section 50 mm
Article
Z.-Nr. AI-0041
No.
PU
Pressure profile 50/25
013006
6m
Pressure profile 50/12
013007
6m
Pressure profile 50/9
013008
6m
Pressure profile 50/15
013009
6m
Pressure profile 50/25
013014
6m
2011
255
THERM+ A-I
■ Profiles
– For more pressure profiles see product range.
System sections
■ Technical information
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Flat pressure profile options
Mullion section 50 mm with three options
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
Pressure profile 50/3
No.
PU
013300
6m
No.
PU
220205
100 m
No.
PU
012011
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 2
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
256
2011
Z.-Nr. AI-0005c
012111
012175
014110
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle 50 mm
Article
Pressure profile 50/3
No.
PU
013300
6m
■ Gaskets
Article
No.
PU
Gasket for flat pressure
profile 3 polygonal
011850
200 m
Gasket for mullion 50
150005
20 m
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
Z.-Nr. AI-0127
No.
PU
012011
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
012111
012175
014110
2011
257
THERM+ A-I
■ Profiles
– Minimum infill thickness 22 mm.
System sections
■ Technical information
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Options with flat pressure profile with ground outer panes
Mullion section 50 mm
■ Technical information
■ Profiles
– Glass bite inside 13.5 mm, outside 10 mm.
Article
– Insulation glass with UV resistant glass edge
and grinding 16x4 mm.
Pressure profile 43/3
– The execution with pressure profile 43/3 and
ground glass pane must be approved by
RAICO for each project.
No.
PU
013343
6m
No.
PU
Gasket for mullion 50
150005
20 m
Pressure profile gasket
2/12
220207
100 m
■ Gaskets
Article
– T12 = Depths from 25 mm
■ Accessories
Article
258
2011
Z.-Nr. AI-0129
No.
PU
Flat fillister head screw
5.5x32 with sealing ring
Pan head tapping screw
5.5x30
Pan head tapping screw
5.5x35 with sealing ring
012010
Cover 11 S
014110
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
012109
012174
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Pressure/Cover profile options for roof light
Transom section 50 mm
Article
No.
PU
– In case of option 1 maintain a distance of 7 mm
between the pressure profile and the rafter pressure profile and assemble with end cap.
Pressure profile 50/7
013018
6m
Pressure profile 50/3
013300
6m
– For option 2 minimum glass infill thickness 22 mm.
Pressure profile 50
perforated
013470
6m
– Option 3 possible from 25° roof inclination.
Cover profile 50/15
013471
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
220205
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for pressure
profile 2
Option 3
■ Accessories
Article
Option 2
Option 1
Z.-Nr. AI-0047
No.
PU
Pan head tapping screw
5.5x45 with sealing ring
Flat fillister head screw
5.5x48 with sealing
washer
Flat fillister head screw
5.5x52 with sealing
washer
Sealing piece for
pressure profile 50
Sealing piece for
pressure profile 50 F
Cross point sealing plate
50
Cross point sealing plate
50 F
012178
100
pc(s)
012240
100
pc(s)
012241
100
pc(s)
014035
10 pc(s)
014038
10 pc(s)
016050
10 pc(s)
016053
10 pc(s)
End cap 50/7
016618
10 pc(s)
2011
259
THERM+ A-I
■ Profiles
– For roof light glazing only use pressure profile
screws with sealing washer.
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of mullion and wall with foil
■ Technical information
– T190 = Vapour-tight membrane no. 011091
260
2011
Z.-Nr. AI-1016
THERM+ A-I
Building connections
THERM+ A-I
Z.-Nr. AI-1013
2011
261
System sections
Aluminium curtain wall 50/56 mm
Connection of mullion and wall without foil
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall, base point
Drainage downwards
■ Technical information
– Bolting of base point fixation bracket referring
to statistical requirements.
– T5 = Floor finishing
– T9 = Floor
– T129 = Vapour-tight membrane no. 014011
– T130 = 119016 for insertion
– T191 = Breather membrane no. 011094
262
2011
Z.-Nr. AI-1025
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and frame profile
THERM+ A-I
– T5 = Floor finishing
– T9 = Floor
– T126 = Vapour-tight membrane no. 011092
– T191 = Breather membrane no. 011094
Z.-Nr. AI-1017
2011
263
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall, base point
Drainage forwards with window sill
■ Technical information
– Bolting of base point fixation bracket referring
to statistical requirements.
– T5 = Floor finishing
– T9 = Floor
– T129 = Vapour-tight membrane no. 014011
– T130 = 119016 for insertion
– T191 = Breather membrane no. 011094
264
2011
Z.-Nr. AI-1024
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and ceiling
Floating bearing
THERM+ A-I
– Bolting of base point fixation bracket referring
to statistical requirements.
– T6 = Ceiling
– T10 = Ceiling finishing
– T130 = 119016 for insertion
– T191 = Breather membrane no. 011094
Z.-Nr. AI-1026
2011
265
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and ceiling
Floating bearing
■ Technical information
– T6 = Ceiling
– T7 = Interior ceiling finishing
– T8 = Exterior ceiling finishing
– T123 = Vapour-tight membrane no. 014010
– T191 = Breather membrane no. 011094
– T192 = Fixation bracket 80 no. 166005
266
2011
Z.-Nr. AI-1021
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and inserted ceiling
Fixed bearing with fixation bracket set no. 1
THERM+ A-I
– T4 = Intermediate floor
– T5 = Floor finishing
– T123 = Vapour-tight membrane no. 014010
– T194 = Fixation bracket 120 no. 166015
Z.-Nr. AI-1022
2011
267
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and inserted ceiling
Floating bearing with fixation bracket set no. 2
■ Technical information
– T4 = Intermediate floor
– T5 = Floor finishing
– T123 = Vapour-tight membrane no. 014010
– T194 = Fixation bracket 120 no. 166015
268
2011
Z.-Nr. AI-1023
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and inserted ceiling
Joint of mullion with fixation bracket set no. 3
THERM+ A-I
– T4 = Intermediate floor
– T5 = Floor finishing
– T123 = Vapour-tight membrane no. 014010
– T193 = Fixation bracket 140 no. 166010
Z.-Nr. AI-1020
2011
269
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and attic
■ Technical information
– T6 = Ceiling
– T10 = Ceiling finishing
– T123 = Vapour-tight membrane no. 014010
– T194 = Fixation bracket 120 no. 166015
270
2011
Z.-Nr. AI-1027
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Certified passive house curtain wall with insulating block P 56/39
Mullion section/transom section 56 mm
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block P 56/39
168520
50 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
011070
■ Accessories
Article
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x65
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 47 to 48
162090
012125
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
10 pc(s)
011070
Z.-Nr. AI-0093
2011
271
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Insulating block P 56/19
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– The type of insulating block P depends on the infill
thickness:
24 to 29 mm: insulating block P 56/19, No. 168515
30 to 43 mm: insulating block P 56/25, No. 168516
44 to 52 mm: insulating block P 56/39, No. 168520
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
– Uf-values see chapter thermal insulation.
■ Gaskets
– T12 = Depths from 25 mm
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block P 56/19
168515
50 m
■ Accessories
Article
272
2011
Z.-Nr. AI-0091
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Insulating block 21
Mullion section/transom section 56 mm
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
■ Gaskets
Article
Gasket for mullion 56
No.
PU
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block 56/21
150610
50 m
■ Accessories
Article
Z.-Nr. AI-0100
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x45
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 27 to 28
162040
012115
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
2011
10 pc(s)
273
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Insulating block 9
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
■ Gaskets
Article
Gasket for mullion 56
No.
PU
150105
20 m
Gasket for transom 56
150110
20 m
Insulating block 56/9
151020
50 m
■ Accessories
Article
274
2011
Z.-Nr. AI-0058
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Standard exterior gasket
Mullion section/transom section 56 mm
Article
– Uf-values see chapter thermal insulation.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0051
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
2011
10 pc(s)
275
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Corner mullion, 90° angle, vertical
System width 56 mm
90°
■ Profiles
Article
No.
PU
Cover profile 56/15
013023
6m
Structural profile 56/25
110053
6m
Structural profile 56/75
110060
6m
Pressure profile 53
perforated
118010
6m
Connection profile 39/22
168021
6m
No.
PU
■ Gaskets
Article
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
276
2011
Z.-Nr. AI-0161
No.
PU
012114
100
pc(s)
100
pc(s)
908118
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Corner mullion, 90° angle, vertical
System width 56 mm
90°
No.
PU
Cover profile 56/15
013023
6m
Structural profile 56/100
110065
6m
Pressure profile 53
perforated
Base profile 47
perforated
118010
6m
145010
6m
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Connection profile 39/22
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
No.
PU
012114
100
pc(s)
100
pc(s)
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
Z.-Nr. AI-0162
908118
2011
277
THERM+ A-I
Article
System sections
■ Profiles
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Corner mullion for variable angles, vertical
System width 56 mm
■ Technical information
■ Profiles
– T123 = vapour-tight membrane no. 014010
Article
No.
PU
Cover profile 56/15
013023
6m
Structural profile 56/75
110060
6m
Pressure profile 53
perforated
118010
6m
Connection profile 39/22
168021
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Compensation gasket 2
227010
100 m
■ Accessories
Article
Pan head tapping screw
5.5x42
Special countersunk
screw 4.8x19
278
2011
Z.-Nr. AI-0163
No.
PU
012114
100
pc(s)
100
pc(s)
908118
THERM+ A-I
System sections 56 mm
Aluminium curtain wall 50/56 mm
Saddle roof, ridge solution
System width 56 mm
Article
No.
PU
013310
6m
Structural profile 56/25
110053
6m
Connection profile 39/22
168021
6m
No.
PU
Gasket for transom 56
150110
20 m
Gasket for pressure
profile 2
220205
100 m
Pressure profile 56/3
■ Gaskets
Article
■ Accessories
Article
Special countersunk
screw 4.8x19
Z.-Nr. AI-0164
No.
PU
908118
100
pc(s)
2011
279
THERM+ A-I
■ Profiles
– T125 = vapour-tight interior connection
System sections
■ Technical information
THERM+ A-I
Structural profile options
Aluminium curtain wall 50/56 mm
Overview structural profiles 56 mm
Mullion section 56 mm
■ Technical information
■ Profiles
– For mullions and transoms.
Article
– Structural reinforcement with insertion profiles
no. 119005 to 119035 or conventional steel
profiles.
– T-connectors see chapter assembly options/
connecting technology.
No.
PU
Cover profile 56/15
013023
6m
Structural profile 56/25
110053
6m
Structural profile 56/50
110055
6m
Structural profile 56/75
110060
6m
Structural profile 56/100
110065
6m
Structural profile 56/125
110070
6m
Structural profile 56/150
110075
6m
Structural profile 56/175
110080
6m
Structural profile 56/200
110085
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150105
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
■ Accessories
Article
Pan head tapping screw
5.5x42
No.
280
2011
Z.-Nr. AT-0004
No.
PU
012114
100
pc(s)
Statical values
Ix cm4
Iy cm4
110053
9.32
15.75
110055
42.75
32.43
110060
101.38
42.65
110065
195.95
51.82
110070
333.31
61.62
110075
510.95
72.45
110080
738.38
93.19
110085
1159.57
108.92
THERM+ A-I
Structural profile options
■ Profiles
– For expansion mullions.
Article
No.
PU
– Structural reinforcement with insertion profiles
no. 119115 to 119125.
Cover profile 56/15
013023
6m
Expansion sturctural
profile 56/75 left
Expansion structural
profile 56/75 right
Expansion structural
profile 56/100 left
Expansion structural
profile 56/100 right
Expansion structural
profile 56/125 left
Expansion structural
profile 56/125 right
Expansion structural
profile 56/150 left
Expansion structural
profile 56/150 right
Pressure profile 53
perforated
110210
6m
110211
6m
110215
6m
110216
6m
110220
6m
110221
6m
110225
6m
110226
6m
118010
6m
Fixation profile 18/14 I
168201
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Interior gasket 56 H
150335
40 m
Gasket for expansion
mullion
152005
100 m
No.
PU
012114
100
pc(s)
– Consisting of 1x profile L and 1x profile R and
2x gasket for expansion profile.
– T-connectors see chapter assembly options/
connecting technology.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Pan head tapping screw
5.5x42
No.
Z.-Nr. AT-0005
Statical values
Ix cm4
Iy cm4
110210
63.15
12.86
110211
35.09
4.16
110215
124.57
14.39
110216
74.61
5.14
110220
213.60
15.79
110221
134.53
6.12
110225
333.81
17.11
110226
218.39
7.10
2011
281
THERM+ A-I
■ Technical information
System sections
Aluminium curtain wall 50/56 mm
Overview expansion profiles 56 mm
System width 56 mm
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Gasket for transom with flap between mullions
Transom section 56 mm
■ Technical information
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
Article
– Available for all insulating blocks.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
150115
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for transom 56
with flap
■ Accessories
Article
282
2011
Z.-Nr. AI-0052
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
162035
012114
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Continuous base gasket with flap
Transom section 56 mm
Article
– Available for all insulating blocks.
– Base gasket up to 64 mm infill thickness
available.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
Connection profile 36/22
168005
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Compensation gasket 2
011080
100 m
Base gasket for transom
56 with flap
150120
20 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0052a
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x42
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for base
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 25 to 26
012114
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
152071
10 pc(s)
162035
10 pc(s)
2011
283
THERM+ A-I
■ Profiles
– T-connectors see chapter assembly options/
connecting technology.
System sections
■ Technical information
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Connection of ventilated/non-ventilated curtain wall
Transom section 56 mm
■ Profiles
Article
No.
PU
Cover profile 56/12
013024
6m
Pressure profile 53
perforated
118010
6m
Connection profile 45/42
168060
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
011074
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for pressure
profile 7
■ Accessories
Article
284
2011
Z.-Nr. AI-0165
No.
PU
Special countersunk
screw 5.5x24
Flat fillister head screw
5.5x16
Pan head tapping screw
5.5x42
012029
100
pc(s)
100
pc(s)
100
pc(s)
012097
012114
Glass carrier 25 to 26
162035
10 pc(s)
Pan head tapping screw
4.8x16
230150
100
pc(s)
Connection spring 39/25
915500
10 pc(s)
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Interior compensation of varying infill thicknesses
Mullion section/transom section 56 mm
Article
No.
PU
Cover profile 56/15
013023
6m
– T-connectors see chapter assembly options/
connecting technology.
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Compensation profile
7/23
Pressure profile 53
perforated
116005
6m
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
Interior gasket 3
220320
100 m
– T12 = Depths from 25 mm
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
■ Accessories
Article
Z.-Nr. AI-0073
No.
PU
Flat fillister head screw
5.5x19
Pan head tapping screw
5.5x52
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012103
100
pc(s)
100
pc(s)
Glass carrier 33 to 34
162055
10 pc(s)
Fixture spring 30/25/5
915015
50
pc(s)
012118
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
2011
285
THERM+ A-I
■ Profiles
– Difference between the glass thicknesses
from 10 to 24 mm can be compensated
without exterior glass offset.
System sections
■ Technical information
THERM+ A-I
Assembly options
Aluminium curtain wall 50/56 mm
Single glazing
Mullion section/transom section 56 mm
■ Technical information
■ Profiles
– Depending on the infill thickness for the following
gaskets for pressure profile must be used:
infill thickness 10 to 11 mm: gaskets for pressure
profile 5 mm, no. 011073
infill thickness from 12 mm: gaskets for pressure
profile 3 mm, no. 011070
Article
– T-connectors see chapter assembly options/
connecting technology.
– T12 = Depths from 25 mm
No.
PU
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Structural profile 56/50
110055
6m
Pressure profile 53
perforated
118010
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for mullion 56
150105
20 m
Gasket for transom 56
150110
20 m
■ Accessories
Article
286
2011
Z.-Nr. AI-0054
No.
PU
Special countersunk
screw 5.5x24
Pan head tapping screw
5.5x30
Sealing piece for
pressure profile 56
Cross point sealing plate
56
Sealing piece for
transom 56
Sealing piece for
transom
012029
100
pc(s)
100
pc(s)
Glass carrier 10 to 14
162005
012109
014036
10 pc(s)
016051
10 pc(s)
152015
100
pc(s)
100
pc(s)
152050
10 pc(s)
THERM+ A-I
Polygon glazing system
Aluminium curtain wall50/56 mm
Polygon glazing system with standard interior gasket 1° to 7°
Mullion section exterior angle/interior angle 56 mm
Article
– T-connectors see chapter assembly options/
connecting technology.
No.
PU
Cover profile 56/15
013023
6m
Pressure profile 53
perforated
118010
6m
No.
PU
Gasket for pressure
profile 5
011073
100 m
Gasket for mullion 56
150105
20 m
■ Gaskets
Article
■ Accessories
Article
Pan head tapping screw
5.5x45
Z.-Nr. AI-0064
No.
PU
012115
100
pc(s)
2011
287
THERM+ A-I
■ Profiles
– With exterior gasket for pressure profile 5 mm
and standard interior gasket to max. 7°.
System sections
■ Technical information
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system 8° to 15°
Mullion section exterior angle 56 mm
■ Technical information
■ Profiles
– Face width of cover profile depends on angle
and infill thickness.
Article
No.
PU
– Glass bite (A and B) must be min. 13 mm. The
distance between glass edge and gasket cap
(C) has to be min. 3 mm.
Cover profile 76/15
013050
6m
Pressure profile 73
perforated
118015
6m
No.
PU
011810
100 m
150140
20 m
– Please note the glass tolerances!
■ Gaskets
Article
Gasket for pressure
profile 8° to 15°
Gasket for mullion 56
polygonal 8° to 20°
■ Accessories
Article
Pan head tapping screw
5.5x45
288
2011
Z.-Nr. AI-0124
No.
PU
012115
100
pc(s)
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system 8° to 20° and 21° to 33° with polygon interior and exterior gasket
Mullion section exterior angle 56 mm
Article
No.
PU
Cover profile 56/15
013023
6m
Insertion profile 8° to 20°
013800
6m
Insertion profile
21° to 33°
Pressure profile 53
perforated
013801
6m
118010
6m
No.
PU
011805
100 m
150140
20 m
150145
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 56
polygonal 8° to 20°
Gasket for mullion 56
polygonal 21° to 33°
■ Accessories
Article
Pan head tapping screw
5.5x52
Pan head tapping screw
5.5x55
Z.-Nr. AI-0064a
No.
PU
012118
100
pc(s)
100
pc(s)
012119
2011
289
THERM+ A-I
■ Profiles
– Insulating strips available on demand.
System sections
■ Technical information
THERM+ A-I
Polygon glazing system
Aluminium curtain wall 50/56 mm
Polygon glazing system 34° to 45° with polygon interior and exterior gasket
Mullion section exterior angle 56 mm
■ Technical information
■ Profiles
– Insulating strips available on demand.
Article
No.
PU
Cover profile 56/15
013023
6m
Insertion profile
34° to 45°
Pressure profile 53
perforated
013802
6m
118010
6m
No.
PU
011805
100 m
150150
20 m
■ Gaskets
Article
Gasket for pressure
profile 5 polygonal
Gasket for mullion 56
polygonal 34° to 45°
■ Accessories
Article
Pan head tapping screw
5.5x60
290
2011
Z.-Nr. AI-0064b
No.
PU
012123
100
pc(s)
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Cover profile options clipped
Mullion section 56 mm
Article
No.
PU
– For more cover profiles, end caps and belay
sheet see product range.
Cover profile 56/15
013023
6m
Cover profile 56/12
013024
6m
Cover profile 56/25
013025
6m
Cover profile 56/36
013035
6m
Cover profile 56/32
013320
6m
Cover profile 56/25
013400
6m
Cover profile 56/20
013410
6m
Pressure profile 53
perforated
118010
6m
■ Accessories
Article
Pan head tapping screw
5.5x42
Z.-Nr. AI-0066
No.
PU
012114
100
pc(s)
2011
291
THERM+ A-I
■ Profiles
– Slipping down of the cover profiles must be
prevented.
System sections
■ Technical information
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Pressure profile options visible screwed
Mullion section 56 mm
■ Technical information
■ Profiles
– For more pressure profiles see product range.
Article
No.
PU
Pressure profile 56/25
013026
6m
Pressure profile 56/12
013027
6m
Pressure profile 56/9
013028
6m
■ Accessories
Article
Flat fillister head screw
5.5x45 with sealing ring
292
2011
Z.-Nr. AI-0067
No.
PU
012014
100
pc(s)
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Flat pressure profile options
Mullion section 56 mm with three options
Article
Pressure profile 56/3
No.
PU
013310
6m
No.
PU
220205
100 m
No.
PU
012011
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
■ Gaskets
Article
Gasket for pressure
profile 2
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
Z.-Nr. AI-0068
012111
012175
014110
2011
293
THERM+ A-I
■ Profiles
– Minimum infill thickness 22 mm.
System sections
■ Technical information
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Flat pressure profile options for polygon glazing system 3° to 7° with standard interior gasket
Mullion section exterior angle 56 mm
■ Technical information
■ Profiles
– Minimum infill thickness 22 mm.
Article
Pressure profile 56/3
No.
PU
013310
6m
■ Gaskets
Article
No.
PU
Gasket for flat pressure
profile 3 polygonal
011850
200 m
Gasket for mullion 56
150105
20 m
■ Accessories
Article
Flat fillister head screw
5.5x35 with sealing ring
Pan head tapping screw
5.5x35
Pan head tapping screw
5.5x38 with sealing ring
Cover 11 S
294
2011
Z.-Nr. AI-0127
No.
PU
012011
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
012111
012175
014110
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Options with flat pressure profile with ground outer panes
Mullion section 56 mm
Article
– Insulation glass with UV resistant glass edge
and grinding 16x4 mm.
Pressure profile 43/3
– The execution with pressure profile 43/3 and
ground glass pane must be approved by
RAICO for each project.
No.
PU
013343
6m
No.
PU
Gasket for mullion 56
150105
20 m
Pressure profile gasket
2/12
220207
100 m
■ Gaskets
Article
– T12 = Depths from 25 mm
■ Accessories
Article
Z.-Nr. AI-0152
No.
PU
Flat fillister head screw
5.5x32 with sealing ring
Pan head tapping screw
5.5x30
Pan head tapping screw
5.5x35 with sealing ring
012010
Cover 11 S
014110
100
pc(s)
100
pc(s)
100
pc(s)
100
pc(s)
012109
012174
2011
295
THERM+ A-I
■ Profiles
– Glass bite inside 16.5 mm, outside 10 mm.
System sections
■ Technical information
THERM+ A-I
Cover/Pressure profile options
Aluminium curtain wall 50/56 mm
Pressure/Cover profile options for roof light
Transom section 56 mm
■ Technical information
■ Profiles
– For roof light glazing only use pressure profile
screws with sealing washer.
Article
No.
PU
– In case of option 1 maintain a distance of 7 mm
between the pressure profile and the rafter
pressure profile and assemble with end cap.
Pressure profile 56/7
013038
6m
Pressure profile 56/3
013310
6m
Pressure profile 52
perforated
013475
6m
Cover profile 56/15
013476
6m
No.
PU
011070.LI
100 m
011070.RE
100 m
220205
100 m
No.
PU
012214
100
pc(s)
012215
100
pc(s)
014036
10 pc(s)
014039
10 pc(s)
016051
10 pc(s)
016054
10 pc(s)
016638
10 pc(s)
– For option 2 minimum glass infill thickness 22
mm.
– Option 3 possible from 25° roof inclination.
■ Gaskets
Article
Gasket for pressure
profile 3
Gasket for pressure
profile 3
Gasket for pressure
profile 2
Option 3
■ Accessories
Article
Option 2
Flat fillister head screw
5.5x45 with sealing
washer
Flat fillister head screw
5.5x50 with sealing
washer
Sealing piece for
pressure profile 56
Sealing piece for
pressure profile 56 F
Cross point sealing plate
56
Cross point sealing plate
56 F
Option 1
End cap 56/7
296
2011
Z.-Nr. AI-0070
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of mullion and wall with foil
THERM+ A-I
– T190 = Vapour-tight membrane no. 011091
Z.-Nr. AI-1016
2011
297
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of mullion and wall without foil
298
2011
Z.-Nr. AI-1013
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall, base point
Drainage downwards
THERM+ A-I
– Bolting of base point fixation bracket referring
to statistical requirements.
– T5 = Floor finishing
– T9 = Floor
– T129 = Vapour-tight membrane no. 014011
– T130 = 119016 for insertion
– T191 = Breather membrane no. 011094
Z.-Nr. AI-1025
2011
299
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and frame profile
■ Technical information
– T5 = Floor finishing
– T9 = Floor
– T126 = Vapour-tight membrane no. 011092
– T191 = Breather membrane no. 011094
300
2011
Z.-Nr. AI-1017
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall, base point
Drainage forwards with window sill
THERM+ A-I
– Bolting of base point fixation bracket referring
to statistical requirements.
– T5 = Floor finishing
– T9 = Floor
– T129 = Vapour-tight membrane no. 014011
– T130 = 119016 for insertion
– T191 = Breather membrane no. 011094
Z.-Nr. AI-1024
2011
301
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and ceiling
Floating bearing
■ Technical nformation
– Bolting of base point fixation bracket referring
to statistical requirements.
– T6 = Ceiling
– T10 = Ceiling finishing
– T130 = 119016 for insertion
– T191 = Breather membrane no. 011094
302
2011
Z.-Nr. AI-1026
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and ceiling
Floating bearing
THERM+ A-I
– T6 = Ceiling
– T7 = Interior ceiling finishing
– T8 = Exterior ceiling finishing
– T123 = Vapour-tight membrane no. 014010
– T191 = Breather membrane no. 011094
– T192 = Fixation bracket 80 no. 166005
Z.-Nr. AI-1021
2011
303
System sections
■ Technical nformation
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and inserted ceiling
Fixed bearing with fixation bracket set no. 1
■ Technical information
– T4 = Intermediate floor
– T5 = Floor finishing
– T123 = Vapour-tight membrane no. 014010
– T194 = Fixation bracket 120 no. 166015
304
2011
Z.-Nr. AI-1022
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and inserted ceiling
Floating bearing with fixation bracket set no. 2
THERM+ A-I
– T4 = Intermediate floor
– T5 = Floor finishing
– T123 = Vapour-tight membrane no. 014010
– T194 = Fixation bracket 120 no. 166015
Z.-Nr. AI-1023
2011
305
System sections
■ Technical information
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and inserted ceiling
Joint of mullion with fixation bracket set no. 3
■ Technical information
– T4 = Intermediate floor
– T5 = Floor finishing
– T123 = Vapour-tight membrane no. 014010
– T193 = Fixation bracket 140 no. 166010
306
2011
Z.-Nr. AI-1020
THERM+ A-I
Building connections
Aluminium curtain wall 50/56 mm
Connection of curtain wall and attic
THERM+ A-I
– T6 = Ceiling
– T10 = Ceiling finishing
– T123 = Vapour-tight membrane no. 014010
– T194 = Fixation bracket 120 no. 166015
Z.-Nr. AI-1027
2011
307
System sections
■ Technical information
308
2011