Edition 2011
Green Passion
INDEX
04.
LAWN TRACTORS
14.
FRONT MOWERS
22.
LAWN MOWERS
2.
36.
BRUSH CUTTERS,
TRIMMERS
46.
HEDGE CUTTERS,
grass shear
48.
CHAIN SAWS
56.
LEAF BLOWERS,
Chipper & Shredder,
SCARIFIER
62.
CULTIVATORS,
SCYTHE
3.
LAWN TRACTORS
What really makes the difference in choosing a Castelgarden machine are the design and the reliability,
in few words: the high end result of almost 20 years of history in building gardening lawntractors. The wide range covers all consumer needs, both semi-professional and
domestic use from 122 cm down to 63 cm cutting deck. The range is
complete with many valuable accessories to work out different
situation and tasks all year round.
4.
Castelgarden lawn tractors offer different options for collecting or discharging your cut grass. You can find a range of
different solutions, including the best collecting system, mulching and rear or side discharge. With Castelgarden lawn
tractors you will find the solution that fits your individual needs.
BEST COLLECTING
REAR DISCHARGE
The Castelgarden XH, XX and XT lawn tractors are extraordinary
in terms of cutting and collecting. Collecting capacity has been
greatly enhanced due to the technical developments of our engineers in the Castelgarden R&D Department. A newly developed
straighter tunnel and a larger tunnel mouth have improved the
effectiveness of the “inverse vacuum cleaner principle”.
All collecting tractors with a 72 cm or larger cutting deck upward,
can work without a rear bag, thanks to the deflector kit that
allows you to cut tall grass and leave it behind on the lawn. The
fallen grass can then be collected by cutting again but mounting
the grass-collector, so you obtain a perfect result even in tough
conditions with wet grass or lots of leaves.
MULCHING
Mulching is the perfect way to keep a nice lawn, without having to empty
the grass-collector. By adding the optional mulching kit to your collecting or
side discharge lawn tractor you can cut the grass into small clippings that
disappear onto your lawn and fertilize the soil.
SIDE DISCHARGE
Use a side discharge tractor to quickly work out cutting of tall and rough
grass. The two cutting decks in the Castelgarden range (98 and 108 cm)
have two blades and a wide side chute to always grant the top performance
of the Castelgarden lawn tractors.
5.
lawn TRACTORS
THE 4 WHEEL DRIVE SYSTEM
A unique 4 wheel drive system makes Castelgarden XH lawn tractors
even more enjoyable and useful. It features a rear pump and a
hydraulic drive system on the front axle, for highly efficient hydraulic
4WD transmission. The system ensures traction on uneven, wet
and slippery areas and slopes. The 4WD automatically adjusts the
traction on all wheels depending on conditions and terrain.
Easy to operate twin
speed foot pedals for
precise control and
effortless speed and
direction changes.
Strong iron foot rests.
6.
The diagnostic dashboard
has 6 colour coded safety
LEDs and a multifunctional
LCD display showing :
-Hours of operation
-Battery voltage
-RPM
-Status of the collector
-Oil level
-Fuel level and reserve
-24/hour time display
Cutting height is
selected using
Castelgarden’s new
“Easy memo” control.
It allows selection of
a cutting height from
25 to 100 mm with
memorisation of the
chosen height.
The benefits of a 4 WD system:
• Increases effectiveness with rear mounted accessories.
• Provides excellent traction via differentials, reducing the
risk of tearing the grass.
• Increased control and maneuverability on slopes.
122 cm or 102 cm
cutting decks with
contra-rotating twin
collection blades.
The large and effective
360 litre collector is
perfect for collecting
leaves as well as grass.
Easily emptied from the
driver’s seat.
XHX 255 4WD model
powered by the new
professional
Honda GXV 660 engine.
XH RANGE
Four models, perfect for consumers with large, open garden areas and demanding professional requirements. XH lawn
tractors have a powerful appearance and fully pressure-lubricated, two-cylinder Briggs & Stratton or professional Honda
engines. Featuring 102 or 122 cm cutting decks with side bumper, they are equipped with big 360 liter collectors, heavy
duty anti-chipping wheels. hComfort and professional features now enriched by the brand new cruise-control system, new
steering system with cardanic transmission to reduce effort and a new seat with arm-rests. All models include the ingenious
“EASY MEMO” device to set the right cutting height for your garden, the blades are then easily engaged by simply pulling a
button on the dashboard.
B
D
E
A
XHX 240 4WD E
C
G
F
A - Extra large rear tyres ensure great mobility
and a smooth ride;
rear 20” – front 16”.
B - New comfort steering system
C - Steel chassis – longer, stronger and larger than
on any other model – provides superior balance
and stability.
D - Useful cup and phone holder and 12 V
power supply.
E - Foot operated hydrostatic transmission and strong black iron footrest.
F - Anti-scalp wheels reduce the risk of
damaging delicate ground.
G - The strong bumper protects the front of
the lawn tractor effectively.
A
XHX 240
XHT 220 4WD
XHX 240 4WD E
Intek 8240 V-twin
Intek 7220 V-twin
Intek 8240 V-twin
XHX 255 4WD
GXV 660 Twin cyl.
1000 m²
102 cm
8000 m²
122 cm
7.
lawn TRACTORS
XX AND XT RANGE
Castelgarden tractors are equipped with modern multi-function
displays which provide the operator with information on safety and lawn
tractor functions. The operator can adjust cutting height, control the speed
of the engine, and easily empty the grass box with the lifting bar or, in some models,
electrically from the dashboard. All from the driver’s seat, bringing comfort and safe operation.
6 LED and a LCD display (where applicable), are integrated in the dashboard. These models are ideal for
medium to large sized gardens. Designed with a strong chassis and high specifications to guarantee maximum
reliability. Available with 102 cm (XT) or 122 cm (XX) cutting deck they are the symbol of the Castelgarden lawn tractors.
Now available with brand new cruise-control and a new steering system for maximum comfort and minimum effort.
XX RANGE
A
XX 220 HD
XX 220 HDE
Intek 7220 V-twin
Intek 7220 V-twin
1000 m²
8000 m²
D
E
XT RANGE
C
B
B
XX 220 HDE
XT 170 HDP.B. 4165 AVS
XT 190 HD
Intek 4185
XT 220 HD
Intek 7220 V-twin
XT 175 HD
1000 m²
GCV 530 Twin cyl.
8000 m²
A - Adjustable ergonomic seat.
B - 15” front wheels, 18” rear.
C - Strong metal footrest. Non-slip footpads help
protect the driver’s feet from vibration.
D - Easy access for maintenance.
E - Big collector, 320 litre volume.
102 cm
XT deck
102 cm
XX deck
The grass collector
can be manually
emptied easily from
the driver’s seat.
8.
Larger tunnel mouth: the
tunnel can be removed
without tools.
Deck height adjustable
between 30–90 mm
from the driver’s seat
using the 7 position lever.
Winged collection blades.
XD RANGE
The compact solution for out of control grass. With the brand-new Castelgarden bonnet, the XD and XDL
models are the right solution when you have to face tall and rough grass, but not just that, the 98 or 108 cm
cutting deck are also easily converted to mulching function for perfect lawns. XD and XDL models will assure
you perfect comfort, reliability and an extreme handiness thanks to the narrow turning circle. Powered by B&S
Stratton engines up to 500 cc they have big front 15” wheels, a mulching plug and trailer hitch as standard,
allowing use of additional accessories such as a small cart.
A
XD RANGE
D
XD 140P.B.
XD 140 HDP.B.
XDL 170P.B.
XDL 190 HDP.B.
1000 m²
B
AVS
AVS
AVS
AVS
8000 m²
C
98 cm
E
B
XDL 190 HD
108 cm
A - Adjustable ergonomic seat.
B - 15” front wheels, 18” rear.
C - Strong metal footrest.
D - Easy access for maintenance.
E - 7 cutting positions from 25 to 80 mm.
Dashboard with
Speed control and
electromagnetic
clutch for easy blade
engagement.
3130
3130
4165
4185
Wide side-ejector
mouth for better cutting
performance even in
demanding conditions.
Cutting height
adjustment to
7 positions from
25 to 80 mm.
Gear selector: 5 forward
and 1 reverse. Central
compartment for small
objects.
9.
lawn TRACTORS
XG RANGE
Smaller but always big on features! This is because they are compact
in size, but include high standard features such as the diagnostic display, the
big petrol tank (up to 6 litre), the big front tyres, and the engagement of the blades
via electromagnetic clutch. The collector has a volume of 260 litres to give you good range
when cutting your garden area, and the collecting performance is maximised. If necessary they can be
transformed into mulching machines by adding the optional mulching kit.
XG RANGE
A
XG 140 HDP.B. 3130 AVS
XG 170 HDP.B. 4165 AVS
C
XG 135 HD
XG 175 HD
B
1000 m²
D
E
XG 175 HD
GXV 390
GCV 530 Twin cyl.
8000 m²
92 cm
F
D
A - Adjustable ergonomic seat.
B - 260-litre capacity collector.
C - Compartment under the seat.
D - 15” front wheels, 18” rear.
E - 7 cutting positions from 25 to 80 mm.
F - Front bumper for improved safety.
The cutting height can be
easily set with 7 different
levels. (25-80 cm)
10.
New dashboard with 6
useful diagnostic LEDs:
- Parking brake engaged
- Collector unhooked
- Blades engaged
- Seat without operator
- Neutral gear
- Low battery
Forward and reverse
hydrostatic speed control.
Safe driving: the tractor
stops when the pedal is
released.
Collector easy to
discharge from the
driver’s seat.
A wide and straight
tunnel for better
collection; trailer hitch
kit as standard.
Fuel tank
XF AND XE RANGE
Castelgarden collecting ride-ons are ideal for those who have a small garden but still have a great passion
for gardening. They are extremely handy and easy to use and are enjoyable and comfortable to drive.
Powered by Briggs & Stratton or Honda engines, the compact ride-on are available with manual gear or
hydrostatic speed control. The grass-collector can easily be emptied from the driver’s seat by using the
handle bar. The mulching kit is available as optional on all models.
XF RANGE
A
C
The compact XF collecting ride-on have a single blade with great
effectiveness of the collecting system. They feature a manual
gear or hydrostatic speed control. The adjustable seats ensures
ergonomic positioning and the grass-collector is easily emptied
from the driver’s seat via the handle bar.
B
XF 140P.B. 3130 AVS
XF 140 HDP.B. 3130 AVS
D
XF 135 HD
GXV 390
1000 m²
8000 m²
XF 140 HD
72 cm
A - Adjustable ergonomic seat.
B - Grass collector capacity: 170 litre.
C - Cutting height adjustment – 7 cutting positions from 30 to 80 mm.
D - 72 cm cutting deck; mulching kit available as an option on all models.
Gear transmission
XE RANGE
E
B
A
D
C
These are the smallest Castelgarden ride-on, but are powerful
nevertheless. The engine - with electric start - is placed just between
the foot panels, with easy access for standard maintenance. They
feature a single cutting blade and a 63 cm cutting deck which can
be set to 5 different cutting heights, ranging from 30 to 75 mm.
The innovative continuously variable transmission lets you choose
the right speed without pushing the clutch.
XE 80 VD
875 Series ES
XE 75 VD
Honda GCV 190 E.S.
1000 m²
8000 m²
XE 80 VD
A - 140 litre. capacity collector; easily discharged from the driver’s seat.
B - 5 cutting positions from 30 to 75 mm.
C - 63 cm cutting deck; mulching kit available as an option on all models.
D - Easy access to the engine for maintenance.
E - Easy manual blade engagement.
63 cm
11.
lawn TRACTORS
PLUS RANGE
New to the Castelgarden family is a range of tractors for consumers without
a particular need. Pure collecting garden lawn tractors with cutting widths
up to 102 cm. All the essential features and the same appeal, reliability and
cutting performance as the rest of the Castelgarden family.
B
D
A
E
C
A - 300 litre capacity collector easy to discharge
from the drivers’ seat
B - 7 cutting positions from 30 to 90 mm
C - 102 cm cutting deck, mulching kit available
as optional
D - 7 litre fuel tank capacity
E - Hydrostatic speed control
OPTIONAL KIT
Mulching kit
Combi cart
Rear deflector
Snow-blade
Battery charger
Snow-chains
Trailer hitch kit
PTC RANGE
A tractor with 102cm cutting deck for large gardens. Twin
collecting blades, big grass-collector (300 litre), 15” front wheels
and hydrostatic transmission. Electromagnetic clutch for easy
blade engagement. Powered by B&S Intek series 7220 twin
cylinder engine.
PTC 220 HD
Intek series 7220 V-twin
102 cm
PTC dashboard
12.
PTC deck 102 cm
PG - PT RANGE
Compact lawn tractor family with 2 cutting widths available, 92
cm and 102 cm, with big 15” front wheels. Powered by OHV B&S
engine with AVS system, available both with gear transmission and
hydrostatic transmission.
B
D
A
PG 140P.B. series 3130 AVS
PG 140 HDP.B. series 3130 AVS
E
PT 140P.B. series 3130 AVS
PT 170 HDP.B. series 4165 AVS
C
PT 170 HD
A - 260 litre capacity collector easy to discharge
from the drivers’ seat
B - 7 cutting positions from 25 to 80 mm
C - 92 or 102 cm cutting deck.Mulching kit available as option.
D - Easy access for routine maintenance and fueling.
E - Hydrostatic speed control (HD).
OPTIONAL KIT
Mulching kit
Combi cart
Rear deflector
Snow-blade
102 cm
92 cm
Battery charger (included for PT model)
Snow-chains
Trailer hitch kit
Protective cover
PG deck 92 cm
PT deck 102 cm
PE RANGE
A
C
Small garden collecting rider-on with a B&S 850 series manual
start engine. Ideal for small gardens, very handy and easy to use.
It is equipped with a 140 litre Grass collector and a variable drive
transmission which allows you to choose the right speed in a
smooth and comfortable way.
B
PE 60 VD
D
63 cm
PE 60 VD
A - Adjustable ergonomic seat.
B - Grass collector 140 litre.
C - Adjustment of cutting height.– 5 positions (30-75 mm)
D - 63 cm cutting deck. Mulching kit available as option.
850 series, Manual start
PE deck 63 cm
OPTIONAL KIT
Mulching plug
Protective cover
13.
FRONT MOWERS
Castelgarden front mowers are easy to use, versatile and particularly comfortable: all the
essential features for a great mower. Heavy-duty components along with a powerful
engine guarantee many years of reliable and safe service even under difficult
conditions. The unmatched traction and manoeuvrability make
them ideal for larger gardens. The high comfort level
enables the operator to carry out consistently high
workloads with minimal stress.
14.
REAP THE BENEFITS OF A FRONT MOWER.
Front mounted cutting deck for improved accessibility.
Because the cutting deck is at the front, nothing is missed.
You have full mowing control and can mow along fences,
close to trees and under bushes, as well as cut right into
corners and over edges. The front mounted cutting decks
give a superb finish as the grass is cut before it is driven
over by the wheels. Great manoeuvrability is assured
thanks to the rear wheel steering.
Spring, summer, autumn, or winter, the wide range of
accessories make the Castelgarden front mowers yearround companions.
Castelgarden front mowers are truly for year-round use.
You can cut grass in summer, collect leaves in autumn,
clean snow from your garden paths in winter and brush
away dust and gravel from paved areas in spring. From
sweepers and trailers to snow blades – think about the
accessories you may want to add, either now or in the future.
Mulching technology for a healthy lawn.
A beautiful lawn normally takes three steps: cut and remove the cuttings, water and
then add nutrition. With Castelgarden front mowers you cut and fertilise in one step.
With mulching technology the grass is cut and re-cut into tiny bits that are then blown
right down into the turf again. The recycled clippings provide moisture and natural
nutrients for your lawn. Cutting is easier and faster because you skip the collection
stage. You save time, reduce fuel consumption and minimise environmental impact.
That’s mulching.
15.
FRONT M0WERS
XK RANGE
Because the cutting deck is at the front, nothing is missed. You
have full mowing control and can mow along fences, close to trees and
under bushes, as well as cut right into corners and over edges. The front mounted
cutter decks give a superb finish as the grass is cut before it is run over the wheels. Great
manoeuvrability is assured thanks to the rear wheel steering.
XK4 160 HD
Engine: Briggs & Stratton 4155 AVS
Transmission: Hydrostatic four wheel drive
Cutting width: 95 or 105 cm
Adjustable ergonomic seat
Mulching technology and rear discharge
Adjustable steering wheel with servo
XK 160 HD
Engine: Briggs & Stratton 4155 AVS
Transmission: Hydrostatic drive
Cutting width: 95 or 105 cm
Adjustable ergonomic seat
Mulching technology and rear discharge
Adjustable steering wheel
XK 140 HD
Engine: Briggs & Stratton 3130 AVS
Transmission: Hydrostatic drive
Cutting width: 95 cm
Adjustable ergonomic seat
Mulching technology and rear discharge
Adjustable steering wheel
16.
XM RANGE
The XM Castelgarden front mower range is powered by reliable petrol engines with maximum torque for tough
mowing conditions. The engines provide excellent fuel economy, low emission levels, quick starting and quiet
operation. The machines are fitted with 3.8 litre fuel tanks to provide sufficient capacity for long mowing
sessions. The reinforced protective frame on the deck protects the mower from obstacles that may get in the
operator’s way. The mulching system turns piles of rotting grass into a thing of the past. Once you try it you will
not want to be without it!
XM 160 HD
XM 140 HD
Engine: Briggs & Stratton 4155 AVS
Transmission: Hydrostatic drive
Infinitely variably controlled speed
Cutting width: 85,95 or 105 cm
Adjustable ergonomic seat
Mulching technology and rear discharge
Adjustable steering wheel
Engine: Briggs & Stratton 3130 AVS
Transmission: Hydrostatic drive
Infinitely variably controlled speed
Cutting width: 85 - 95 cm
Adjustable ergonomic seat
Mulching technology and rear discharge
Adjustable steering wheel
XM 130
Engine: Briggs & Stratton 3115 AVS
Transmission: 5 forward gears; 1 reverse
Cutting width: 85 cm
Adjustable ergonomic seat
Mulching technology and rear discharge
Adjustable steering wheel
XM 160 HD
After use, the deck can
easily be raised to a
30° washing position
for cleaning without
removing the belt.
Castelgarden front
mowers are compact
mowers which require
little storage space.
All front mowers have
bumpers for completely
safe operation.
Using the lever on the
deck you can easily
select the right cutting
height from 25-85 mm.
17.
TRACTORS & FRONT MOWERS
ACCESSORIES
Mulching kits for lawn-tractors
All Castelgarden tractors can be easily turned into mulching
machines to mulch the grass into small pieces that then
fertilise the soil.
18.
Stone guard
Trailer hitch kit
By using the stone guard in safe conditions to cut long grass
without fitting the grass-collector, the grass falls to the ground.
Fit a trailer hitch to use rear mounted attachments such as a
combi-cart or spreader. Easily fitted to the rear of the tractor
using the bolts supplied in the kit.
Combi-cart
Fertilizer
Get to grips with heavy garden tasks with the help of the
combi-cart. With a rust resistant poly bed and 180 litre
capacity, it can be used as a wheelbarrow or hitched to
any ride-on tractor or front mower.. Unladen weight: 25 kg.
Dimensions: length 159/173, width 83 cm, height 75 cm.
Fertilizer spreader, with a 40 litre capacity poly bed and
a measuring device adjustable from the driver’s seat.
Spreading width: 240 cm.
Plastic roller
Protective cover
Tow and push roller, with a very light plastic body (14 kg when
not filled). It can be filled with water to a maximum weight of
114 kg. 45 cm cylinder diameter. Working width: 60 cm.
Essential to protect your garden tractor or front mower when
not in use. This cover is quick and easy to fit; in just a few
seconds your machine is protected from dust and moisture.
Designed to fit all tractors, it measures 250 cm long by 125
cm wide and has a side window for ventilation. Easy to fold
and put in its bag that measures only 45 x 39 cm!
Tractors
Front Mowers
Snow blade
Sweeper
A robust metal blade, easy to mount on the front of an XX and
XT tractor or a XK frontmower, to clean paths and snow from
driveways.Working width: 120 cm. Either a metal scraper or
a rubber scraper blade can be fitted. Also available for XM
front movers with a 107 cm working width.
Ideal for clearing sand, dirt and leaves from asphalt, lawns
and concrete areas, this sweeper will also clear newly fallen
snow. It features adjustable ground pressure with two rear
pivot wheels. The angle is easily adjusted manually. Working
width: 110 cm for tractors and 95 cm for XK font mowers. An
optional dust cover is also available.
Snow thrower
PTO KIT
This accessory transforms tractors into efficient snow
removers. Front mounted, with single stage operation, it has
a rectangular chute and adjustable skid shoes. The snow
thrower can be raised and lowered comfortably from the
driver’s seat. The chute angle is operated using a control
near the steering wheel. Working width: 100 cm.
The PTO kit enables the garden tractor to be used to power
front mounted accessories such as the sweeper or the snow
thrower. It is a patented Castelgarden product that transfers
the power from the engine to the front accessory. Only fits XX
or XT tractors with electromagnetic clutches.
Rear weight
Front weight
Easy to fit to the grass collector support on the XX and
XT models. It improves the stability of the machine when
using front accessories, particularly the snow-thrower and
sweeper. Weight: 23 Kg.
Just a few bolts are all it takes to mount the front weight and
the frame weight kit on your garden tractor or front mower and
improve stability when using rear mounted accessories.
Front weight: 11.5 Kg. Frame weight: 2 x 17 kg for XK models
or 2 x 13,5 kg for XM models.
Tractors
Front Mowers
Frame weight
19.
TRACTORS & FRONT MOWERS
ACCESSORIES
Snow chains
Pro-snow chains
Easy to fit on the tractor’s rear
wheels, these classic ladder
cross chains in a “D-shape” are
made of galvanized manganese
steel and provide traction on
snow covered paths.
These snow chains offer increased
traction and are recommended when
operating on icy ground. Highly
efficient with transverse links that
are fitted with spikes for maximum
traction. Snow chains for 18” tyres.
RAC Quick Connection
RAC stands for “Release And Connect”. The system
enables you to change accessories in one easy movement,
without the need for any tools! Just click on and off. The
unique RAC quick connection is standard for XK models
and available as accessory for XM models.
1.
2.
3.
4.
THE TWO-IN-ONE CUTTING DECK.
The range of high performance cutting decks let you
choose between mulching mode and rear discharge. The
mulching system recycles grass clippings, with the grass
serving as fertiliser for your lawn. The rear discharge
mode deposits the grass behind the machine, when the
20.
Tractors
Front Mowers
grass is long. Perfect cutting is achieved by adjusting the
cutting height in small gradations. The three decks have
manual cutting height adjustment. The roller levels the
grass to a perfect finished result.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
PT 170 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
PTC 220 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
XHX 240
X
X
X
X
X
X
X
X
X
XHT 220 4WD
X
X
X
X
X
X
X
X
X
XHX 240 4WD E
X
X
X
X
X
X
X
X
X
XHX 255 4WD
X
X
X
X
X
X
X
X
XX 220 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XX 220 HDE
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XT 170 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XT 190 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XT 175 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XT 220 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XD 140
X
X
X
X
X
X
X
X
X
XD 140 HD
X
X
X
X
X
X
X
X
X
XDL 170
X
X
X
X
X
X
X
X
X
XDL 190 HD
X
X
X
X
X
X
X
X
X
XG 135 HD
X
X
X
X
XG 140 HD
X
X
X
XG 170 HD
X
X
X
XG 175 HD
X
X
X
XF 140
X
X
X
X
XF 140 HD
X
X
X
X
XF 135 HD
X
X
X
X
XE 75 VD
X
X
XE 80 VD
X
X
X
X
X
X
EDGE CUTTER
X
X
SPRING HOE
X
PT 140
GRASS & LEAF COLLECTOR 38”
PG 140 HD
WHEEL AXLE ATTACHMENTS
X
RAC QUICK CONNECTIONS
X
ROLLER FOR DECK 85+95+105
X
CUTTING DECK 105 mm
PRO SNOW CHAINS
X
CUTTING DECK 95 cm
SNOW CHAINS
X
CUTTING DECK 85 mm
RUBBER SCRAPER BLADE FOR SNOW
X
PROTECTIVE COVER
STEEL SCRAPER BLADE FOR SNOW BLADE
X
PTO KIT
SNOW BLADE
X
SNOW THROWER
FRONT WEIGHT
X
DUST PROTECTION SWEEPER
PLASTIC ROLLER
X
SWEEPER
COMBI CART
X
REAR WEIGHT
FERTILIZER
X
FRAME WEIGHT
TRAILER HITCH KIT
X
PRO CART
STONE GUARD
X
PG 140
MULCHING KIT
PE 60 VD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
XM 130
X
X
XM 140 HD
X
X
X
X
X
X
X
X
X
XM 160 HD
X
X
X
X
X
X
X
X
X
XK 140 HD
X
X
X
X
X
X
X
X
X
XK 160 HD
X
X
X
X
X
X
X
X
X
X
XK4 160 HD
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
21.
LAWN MOWERS
Technological innovation and aesthetic improvements characterize the range of Castelgarden walk-behind lawn
mowers. A wide range includes users-friendly electric models as well as high performance petrol
engine mowers for heavy-duty work. The petrol machines feature engines such as Honda
or Briggs & Stratton, offering both quality and performance. Innovation is much
in evidence in the Castelgarden range: in the 4-in-1 steel galvanized
mowers, the shining stainless-steel mowers and the upgraded
aluminium range, featuring Dryflex wheels, AVS and
BBC systems.
22.
PROFESSIONAL
With the Professional range, Castelgarden breaks new ground. The BBC (Blade Brake Clutch) allows the engine
to be running while the blade is stopped and the user can engage and disengage the blade directly from the
handle as needed. A clever feature for comfortable and faster mowing.
All XSPW models have the innovative 4- in- 1 cutting system, which allows collecting, mulching, side discharge
or rear discharge. The ergonomic PRO 25mm handlebar is easily adjusted using camlocks. Models are
equipped with a large capacity textile grass collector (75 litre), which has an indicator to show when it is full.
Centralised cutting height adjustment makes any job simple and the washing link speeds up the cleaning
process after completing the job. The wide tread wheels have been specially developed to prevent damage to
the lawn and the integrated front bumper protects the cutting deck.
XSPW 57 MHS BBC
Engine: Honda GCV 190 autochoke
Deck material: steel galvanized
Cutting width: 53 cm, 4-in-1 cutting system
Collector capacity: hybrid 75 litres
Wheel regulation: centralized
Cutting height positions: 6-from 22-95 mm
Self-propelled
BBC: yes
300 m²
3000 m²
Integrated 4 in 1 cutting
system: collecting,
mulching, rear discharge,
side discharge.
You can easily select the
cutting method by the
lever integrated in the
deck system. Therefore
galvanized treatment
protects steel decks from
corrosion and rust.
Ergonomic, comfortable
and robust Pro 25mm
handlebar, adjustable
by camlocks.
BBC lever.
Comfortable height
adjustment regulation.
23.
LAWN MOWERS
PROFESSIONAL
XSPW 52 MHS
XSPW 52 MHS BBC
Engine: Honda GCV 160 autochoke
Deck material: steel galvanized
Cutting width: 48 cm, 4-in-1 cutting system
Collector capacity: hybrid 75 litres
Wheel regulation: centralized
Cutting height positions: 6-from 22-95 mm
Self-propelled
BBC: no / yes
XSPW 52 MHS BBC
300 m²
3000 m²
XSPW 52 MBS
XSPW 52 MBS BBC
XSPW 57 MBS
Engine: B&S 675 series XRZ “Ready start” /
B&S 675 series XRZ “Ready start” /
B&S 750 series DOV “Ready start”
Deck material: steel galvanized
Cutting width: 48 cm / 48 cm / 53 cm, 4-in-1 cutting system
Collector capacity: hybrid 75 litres
Wheel regulation: centralized
Cutting height positions: 6-from 22-95 mm
Self-propelled
BBC: no / yes / no
300 m²
3000 m²
XSPW 57 MBS
XSPW 52 MBS INOX
Engine: B&S 750 series DOV “Ready start”
Deck material: stainless steel
Cutting width: 48 cm, 4-in-1 cutting system
Collector capacity: hybrid 75 litres
Wheel regulation: centralized
Cutting height positions: 6-from 22-95 mm
Self-propelled
300 m²
BBC lever.
24..
24
Honda engines with autochoke system.
Easy starting in all conditions.
3000 m²
PROFESSIONAL
The Pro 60 models are specially designed for heavy duty mowing. Engineered with long lasting components,
ergonomics and features for maximum performance, Pro 60 models are available with Briggs & Stratton or
Honda engines, with integrated AVS on the handle, and professional transmissions for excellent cutting results
in all grass conditions.
PRO 60 MHV BBC
Engine: Honda GXV 160
Deck material: aluminium
Cutting width: 50.5 cm - pro blade
Collector capacity: canvas 80 litres
Wheel regulation: centralized
Cutting height positions: 5 - from 26-76 mm
Self-propelled - 3 speed
BBC: yes
AV-System: yes
300 m²
3000 m²
PRO 60 MB
Engine: B&S 750 series DOV “Ready start”
Deck material: aluminium
Cutting width: 50.5 cm - pro blade
Collector capacity: canvas 80 litres
Wheel regulation: centralized
Cutting height positions: 5 - from 26-76 mm
Self-propelled
AV-System: yes
300 m²
Professional chain
driven transmission.
3000 m²
Profi wheels on ballbearings
with rubber tread.
25.
LAWN MOWERS
The strong aluminium deck on the XA models gives great grass collecting performance. A
mulching plug is also available to convert the lawn mower to mulching, which fertilizes your lawn
by mulching the grass cuttings as you mow. The ergonomic PRO 25mm handlebar on these models
is adjusted using knobs. Some models are equipped with BBC (Blade Brake Clutch), which disengages the
cutting blade so that the grass collector can be emptied without stopping the engine. These models use reliable and
powerful Briggs & Stratton or Honda engines, which use Ready Start and Autochoke systems to allow easier starting.
XA 52 MHS
Engine: GCV 160 autochoke
Deck material: aluminium
Cutting width: 48 cm; mulching kit included
Grass-box capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 30-80 mm
Self-propelled
300 m²
3000 m²
XA 55 MHS
Engine: GCV 190 autochoke
Deck material: aluminium
Cutting width: 51 cm; mulching kit included
Grass-box capacity: hybrid 70 litre
Wheel regulation: centralized
Cutting height positions: 7-from 30-80 mm
Self-propelled
300 m²
3000 m²
XA 55 MHS BBC
Engine: GVC 190 Autochoke
Deck material: aluminum
Cutting width: 51 cm; mulching kit included
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 7-from 30-80 mm
Self-propelled
BBC: yes
300 m²
Mulching kit: you can
either collect the grass
cuttings into the collector,
or finely shred and blow
them down into the lawn.
26.
Grass cuttings are blasted
into a large collection bag you don’t have to stop and
empty it so often.
3000 m²
XA 52 MBS
Engine: 675 series XRZ “Ready start”
Deck material: aluminium
Cutting width: 48 cm; mulching kit included
Grass-box capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 30-80 mm
Self-propelled
300 m²
3000 m²
XA 55 MBS
Engine: 750 series DOV “Ready start”
Deck material: aluminium
Cutting width: 51 cm; mulching kit included
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 7-from 30-80 mm
Self-propelled
300 m²
3000 m²
XA 55 MBS BBC
Engine: B&S 750 series DOV “Ready start”
Deck material: aluminium
Cutting width: 51 cm - kit mulching
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 7 - from 30-80 mm
Self-propelled
BBC: yes
300 m²
Mulching kit: you can
either collect the grass
cuttings into the collector,
or finely shred and blow
them down into the lawn.
3000 m²
Grass cuttings are blasted
into a large collection bag you don’t have to stop and
empty it so often.
27.
LAWN MOWERS
Stainless steel is an iron-carbon alloy with a minimum of 10.5% chromium content.
The name comes from the fact that stainless steel does not stain, corrode or rust as easily
as ordinary steel. Stainless steel has higher resistance to oxidation and corrosion in natural and
man-made environments. It is a hard wearing material that brings extra durability to the machine.
XSI 55 MHS INOX
XSIW 55 MHS 4 INOX
Big wheel mowers
Engine: GCV 160 autochoke / GCV 190 autochoke
Deck material: stainless steel
Cutting width: 51 cm; mulching kit included
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 5-from 30-75 mm, 6-from 30-90 mm
Self-propelled / Self-propelled - 4 speed
300 m²
3000 m²
XSIW 55 MHS 4 INOX
XSIW 55 MBS INOX
Big wheel mower
Engine: 650 series XRZ “Ready start”
Deck material: stainless steel
Cutting width: 51 cm; mulching kit included
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 30-90 mm
Self-propelled
300 m²
3000 m²
XSIW 55 MBS 4 INOX
Big wheel mower
Engine: 750 series DOV “Ready start”
Deck material: stainless steel
Cutting width: 51 cm; mulching kit included
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 30-90 mm
Self-propelled - 4 speed
300 m²
Stainless steel deck has
a higher resistance to
oxidation and corrosion
that brings extra
durability to the machine.
28.
Big wheels for perfect cutting
results even in the most
demanding garden conditions.
Wheel dimensions: front 210 mm
– rear 300 mm.
3000 m²
Castelgarden lawnmowers offer different options for collecting or discharging your cut grass. Castelgarden
has the solution that fits your individual needs. Whether it is a machine with a steel deck for mulching, which
fertilizes your lawn by mulching the grass cuttings as you mow, saving time and money and providing a
great finish to your lawn, or the machines with the extremely durable ABS decks, which have excellent grass
collection performance and feature 70 litre textile grass collectors.
XP 50 HS
Engine: GCV 160 autochoke
Deck material: ABS
Cutting width: 46 cm; high lift blade
Collector capacity: hybrid 70 litres
Wheel regulation: 2 levers
Cutting height positions: 5-from 20-70 mm
Self-propelled
300 m²
3000 m²
XP 50 B
XP 50 BS
Engine: 625 series XRZ
Deck material: ABS
Cutting width: 46 cm; high lift blade
Collector capacity: hybrid 70 litres
Wheel regulation: 2 levers
Cutting height positions: 5-from 20-70 mm
Push / self-propelled
300 m²
3000 m²
XP 50 BS
XSM 52 B
XSM 52 BS
Engine: 675 series XRZ “Ready start”
Deck material: steel galvanized
Cutting width: 48 cm; mulching system
Wheel regulation: 4 / 3 handles
Cutting height positions: 5-from 31-75 mm
Push / self-propelled
300 m²
3000 m²
XSM 52 BS
ABS decks: lightness
and durability combined
for excellent cutting
results. (XP 50 models
with red or grey deck).
Mulching System. The grass
cut is finely chopped before
being blown back into the
lawn.( XSM models)
29.
LAWN MOWERS
Powerful Honda OHC engines for the steel Castelgarden range! The autochoke
system ensures easy starting, with the usual excellent standards of reliability, performance
and low noise emissions. Improvements such as PRO handles, dryflex wheels and standard
features such as the fully adjustable ergo handles and the mulching plugs combine to make these walk
behinds unique in the lawn-care market.
XS 50 MH
XS 50 MHS
Engine: GCV 135
Deck material: steel galvanized
Cutting width: 46 cm; mulching kit included; skid plate
Grass collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-75 mm
Push / Self-propelled
300 m²
3000 m²
XSW 50 MHS
Big wheel mower
Engine: GCV 160 autochoke
Deck material: steel galvanized
Cutting width: 46 cm; mulching kit included; skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-90 mm
Self-propelled
300 m²
3000 m²
XS 55 MHS
Engine: GCV 160 autochoke
Deck material: steel galvanized
Cutting width: 51cm; mulching kit included; skid plate
Grass-box capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-75 mm
Self-propelled
300 m²
3000 m²
XSW 55 MHS
Big wheel mower
Engine: GCV 190 autochoke
Deck material: steel galvanized
Cutting width: 51 cm; mulching kit included; skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-90 mm
Self-propelled
300 m²
Ergonomic, comfortable
and robust Pro 25mm
handlebar, adjustable
by camlocks.
30.
Galvanised treatment that
protects steel decks from
corrosion and rust.
3000 m²
Powerful, versatile and always reliable; Castelgarden steel lawn mowers powered by Briggs & Stratton engines
handle big and medium size lawns with ease. The Ready Start system in the engines is a useful feature that makes
mowing more comfortable than ever. The mowers also accommodate PRO-handles, dryflex wheels, textile grasscatchers and mulching plugs. They are user-friendly with ergonomic controls and light weight for full manoeuvrability.
XS 50 MB
XS 50 MBS
Engine: 625 series XRZ
Deck material: steel galvanized
Cutting width: 46 cm; mulching kit included; skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-75 mm
Push / self-propelled
300 m²
XSW 50 MBS
3000 m²
Big wheel mower
Engine: 625 series XRZ
Deck material: steel galvanized
Cutting width: 46 cm; mulching kit included;
skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-90 mm
Self-propelled
XS 55 MBS
300 m²
Engine: 650 series XRZ “Ready start”
Deck material: steel galvanized
Cutting width: 51 cm; mulching kit
included; skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6 from 25-75 mm
Self-propelled
300 m²
3000 m²
3000 m²
XSW 55 MBS
XSW 55 MBSQ
Big wheel mowers
Engine: 675 series XRZ “Ready start”
Deck material: steel galvanized
Cutting width: 51 cm; mulching kit included;
skid plate / 4-in-1 cutting system (MBSQ)
Collector capacity: hybrid 70 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-90 mm
Self-propelled
300 m²
3000 m²
XSW 55 MBSQ
Skid plate is designed
to prevent scalped spots
on lawn.
Dust protection on steel
models to protect ball
bearings of wheels.
4-in-1 cutting system:
collecting, mulching, rear
discharge and side discharge
31.
LAWN MOWERS
ELECTRIC
Castelgarden electric lawn mowers tackle smaller lawns between 300
- 900 m². They weigh less than petrol mowers, are inexpensive to operate,
easy to maintain and quiet to use. Just plug them in, push a button and you are off!
No starter to pull, no need to check the petrol tank or the oil dipstick. The easy-start electric
motor powers the blades with a cutting width from 33 cm to 46 cm. Controls are handily located on
the handlebar. The handlebar folds in for easy storage in restricted spaces.
XSW 50 EL
Big wheel mower
Motor: 1600 Watt - 230-240 V
Deck material: steel galvanized
Cutting width: 46 cm; skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: 2 levers
Cutting height positions: 6-from 25-90 mm
Push
300 m²
XSW 50 ELS
Big wheel mower
Motor: 1800 Watt - 230-240 V
Deck material: steel galvanized
Cutting width: 46 cm; skid plate
Collector capacity: hybrid 70 litres
Wheel regulation: 2 levers
Cutting height positions: 6-from 25-90 mm
Self-propelled
300 m²
Skid plate is designed
to prevent scalped spots
on lawn.
32.
Easy lever wheels
regulation.
3000 m²
Dust protection on steel
models to protect ball
bearings of wheels.
3000 m²
XP 37 EL
Motor: 1000 Watt - 230-240 V
Deck material: polypropylene
Cutting width: 33 cm
Collector capacity: plastic 27 litres
Wheel regulation: screw in screw out
Cutting height positions: 3-from 25-55 mm
Push
300 m²
3000 m²
XP 41 EL
Motor: 1300 Watt - 230-240 V
Deck material: polypropylene
Cutting width: 37 cm
Collector capacity: plastic 35 litres
Wheel regulation: screw in screw out
Cutting height positions: 3-from 25-55 mm
Push
300 m²
3000 m²
XPL 41 EL
Motor: 1500 Watt - 230-240 V
Deck material: polypropylene
Cutting width: 37 cm
Collector capacity: hybrid 40 litres
Foldable telescopic handlebar
Wheel regulation: centralized
Cutting height positions: 5-from 18-60 mm
Push
300 m²
3000 m²
XPL 43 EL
Motor: 1600 Watt - 230-240 V
Deck material: polypropylene
Cutting width: 39 cm
Collector capacity: plastic / canvas 45 litres
Foldable telescopic handlebar
Wheel regulation: centralized
Cutting height positions: 5-from 21-60 mm
Push
300 m²
3000 m²
The mower needs
no assembly. Just fix
the easy links and set
the right height for
comfortable mowing.
33.
LAWN MOWERS
SPECIAL EDITION
This range uses reliable and powerful Briggs & Stratton or Honda engines, which have the
Ready Start and Autochoke systems to ensure easy starting. The ergonomic handlebar is adjustable and can
be folded for easy storage. Cutting height is easily adjusted using spring-assisted levers, individually on each
wheel or in a centralized control depending on the model. Available in a range of cutting widths from 41 cm to 51 cm.
An important feature of the 51cm cutting width models is the innovative 4-in-1 cutting system, which allows collecting,
mulching, side discharge or rear discharge.
XSE 45 B
Engine: B&S 450 series
Deck material: steel
Cutting width: 41 cm
Collector capacity: plastic 60 litres
Wheel regulation: 4 levers
Cutting height positions: 5-from 27-80 mm
Push
300 m²
3000 m²
XSEW 50 B
Big wheel mower
Engine: B&S 500 series XQ
Deck material: steel
Cutting width: 46 cm
Collector capacity: plastic 60 litres
Wheel regulation: 4 levers
Cutting height positions: 5-from 27-80 mm
Push
300 m²
3000 m²
XSEW 50 BS
Big wheel mower
Engine: B&S 500 series XQ
Deck material: steel
Cutting width: 46 cm
Collector capacity: plastic 60 litres
Wheel regulation: 3 levers
Cutting height positions: 5-from 27-80 mm
Self-propelled
Grass cuttings are blasted
into a large plastic grasscatcher. A comfortable wide
handle helps you to empty
the grasscatcher.
34.
Adjustable handlebar
by knobs.
300 m²
3000 m²
XSE 55 BS
Engine: 625 series XLS
Deck material: steel
Cutting width: 51 cm
Collector capacity: plastic 60 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-75 mm
Self-propelled
300 m²
3000 m²
XSEW 55 BSQ
Big wheel mower
Engine: B&S 650 series XLS “Ready start”
Deck material: steel
Cutting width: 51 cm; 4-in-1 cutting system
Collector capacity: plastic 60 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-90 mm
Self-propelled
300 m²
3000 m²
XSEW 55 HSQ
Big wheel mower
Engine: Honda GCV 160
Deck material: steel
Cutting width: 51 cm, 4-in-1 cutting system
Collector capacity: plastic 60 litres
Wheel regulation: centralized
Cutting height positions: 6-from 25-90 mm
Self-propelled
300 m²
Easy lever wheels
regulation.
3000 m²
4-in-1 cutting system: collecting,
mulching, rear discharge and
side discharge.
35.
BRUSH CUTTERS
Castelgarden trimmers and brush cutters are ideal not only for professional but also for private users. Depending on
their power rating and type, they can be used to remove tough scrub and to thin out overgrown bushes,
as well as for general mowing work. With their interchangeable cutting heads, that feature
everything from nylon lines to metal blades, they have a versatility that is rarely seen
on the market. They are not only easy to operate, but also easy to start in all weather conditions. The powerful engines are robust and
hard-wearing. The new body design for some models,
the grip on the handle bar and the anti-vibration
system are the biggest changes. The
backpack of the flex models is also
completely updated, to give
an outstanding level
of comfort.
36.
A -Air filter.
B -Controls on the handgrip.
C -Handle with safety bar.
D -Handgrip connection vibration proofed.
C
D
A
B
The two-stroke engine and the handgrip are vibration proofed. The controls are
integrated to ensure perfect control and higher quality work. All models feature a
shoulder harness, which makes handling easierand reduces fatigue, two nylon trimmer
lines and three or four tooth discs for grass cutting. Ergonomic bike handlebars or
standard handlebars with safety bar ensure comfortable and safe use.
XB 51 DS
L
Displacement: 47.1 cc
Power: 2.0 kW - 2.7 HP
Shaft: 28 mm
Handle: bike
Double comfort harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 9.1 kg*
XB 51 S
L
Displacement: 47.1 cc
Power: 2.0 kW - 2.7 HP
Shaft: 26 mm
Handle: loop
Single harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 8.4 kg*
Castelgarden brush cutters can be divided into three categories:
S
Easy to use, they are ideal for small
cutting areas. Due to their materials
their are extremely lightweight.
Double comfort harness.
Tap & Go nylon head Profi.
M
They are ideal for use on small farms.
The engine and the anti-vibration
system allow longer work sessions
without stress.
4 tooth blade.
L
Professional models with
particularly powerful engines.
Single harness.
* Weight includes nylon head.
37.
BRUSH CUTTERS
PETROL
The products have perfect balance and an excellent power-weight
ratio. A rigid drive shaft and the ergonomic handlebar with incorporated
controls and comfortable grip ensure top performance. “Easy Starter” provides
easy start-ups every time. Some models feature mini 4-stroke 25 and 35cc engines.
They are reliable, smooth, efficient and quiet, making them more environmentally friendly yet
offering you superb performance. A convenient looped or bike handle, in some cases with a safety bar,
ensure control with safety. A metal blade is supplied as standard for more demanding jobs. In line with the
latest product developments, the structure and the materials used improve the handiness and light weight that make
them ideal for use around the house. Easy and very comfortable to use they are ideal for private users.
XB 43 DS
L
Displacement: 42.7 cc
Power: 1.4 kW - 1.9 HP
Shaft: 28 mm
Handle: bike
Double comfort harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 9.0 kg*
XB 43 S
L
Double comfort harness.
38.
3 tooth blade.
Double harness.
Displacement: 42.7 cc
Power: 1.4 kW - 1.9 HP
Shaft: 26 mm
Handle: loop
Single harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 8.3 kg*
Tap & Go nylon head Profi.
4 tooth blade.
Single harness.
XB 35 DS
M
Displacement: 32.6 cc
Power: 1.1 kW - 1.5 HP
Shaft: 26 mm
Handle: bike
Double harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 7.9 kg*
XB 35 S
M
Displacement: 32.6 cc
Power: 1.1 kW - 1.5 HP
Shaft: 26 mm
Handle: loop
Single harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 7.2 kg*
XB 29 DS
S
Displacement: 25.6 cc
Power: 0.9 kW - 1.2 HP
Shaft: 24 mm
Handle: bike
Single harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 3T blade
Weight: 6.0 kg*
XB 29 S
S
Displacement: 25.6 cc
Power: 0.9 kW - 1.2 HP
Shaft: 24 mm
Handle: loop
Single harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 3T blade
Weight: 5.6 kg*
* Weight includes nylon head.
39.
BRUSH CUTTERS
PETROL
XB 51 FS
Displacement: 47.1 cc
Power: 2.0 kW - 2.7 HP
Shaft: 28 mm flexible
Handle: loop
Backpack harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 12.0 kg*
L
XB 43 FS
Displacement: 42.7 cc
Power: 1.4 kW - 1.9 HP
Shaft: 28 mm flexible
Handle: loop
Backpack harness
Carburettor: diaphragm with
2 port rotary and primer bulb
Standard cutting head: Tap&Go - 4T blade
Weight: 11.9 kg*
L
THE BACKPACK MODELS
Ideal for mowing steep banks, overgrown slopes, narrow ditches
vineyards or orchards. The weight is carried on the user’s back for
maximum comfort. The backpack – with completely new design
and material – allows ergonomic distribution of weight and, thanks
to the cushioning, a reduction of vibration during operation.
40.
Flameproof and equipped with quick uncoupling fastener for
great safety, it only weights 0.9 kg. The flexible connection
between engine and shaft allows use without tiring even when
working uphill. The “Easy Starter” system ensures smooth and
simple starting.
XB 435 HD
L
Displacement: 35 cc
Power: 1.2 kW - 1.6 HP
Shaft: 26 mm
Handle: bike
Double harness
Carburettor: rotary valve
Standard cutting head: Tap&Go - 4T blade
Weight: 10.6 kg*
XB 435 H
L
Double harness.
Tap & Go nylon head Profi.
4 tooth blade.
Displacement: 35 cc
Power: 1.2 kW - 1.6 HP
Shaft: 26 mm
Handle: loop
Single harness
Carburettor: rotary valve
Standard cutting head: Tap&Go - 4T blade
Weight: 9.8 kg*
Single harness.
* Weight includes nylon head.
41.
BRUSH CUTTERS
PETROL
XB 425 HD
Displacement: 25 cc
Power: 0.8 kW - 1.1 HP
Shaft: 26 mm
Handle: bike
Single harness
Carburettor: diaphragm
Standard cutting head: Tap&Go - 3T blade
Weight: 8.1 kg*
M
XB 425 H
M
Displacement: 25 cc
Power: 0.8 kW - 1.1 HP
Shaft: 26 mm
Handle: loop
Single harness
Carburettor: diaphragm
Standard cutting head: Tap&Go - 3T blade
Weight: 7.2 kg*
XR 425 HJ
S
3 tooth blade.
42.
Double harness.
Tap & Go nylon head Profi.
Single harness.
Displacement: 25 cc
Power: 0.8 kW - 1.1 HP
Shaft: 26 mm curved joint
Handle: loop
Single harness
Carburettor: diaphragm
Standard cutting head: Tap&Go
Weight: 5.8 kg*
BJ 345 D
BJ 345
L
Displacement: 42.7 cc
Power: 1.3 kW - 1.8 HP
Shaft: 26 mm
Std cutting head: Tap&Go – 4 T Blade
Handle: bike / loop
Double / single harness
Weight: 8.5 / 7.8 Kg
XB 34 D
M
Displacement: 32.6 cc
Power: 0.9 Kw – 1.2 HP
Shaft: 26 mm
Std cutting head: Tap&Go – 3 T Blade
Handle: bike
Double harness
Weight: 7.5 Kg
XB 34
M
Displacement: 32.6 cc
Power: 0.9 Kw – 1.2 HP
Shaft: 26 mm
Std cutting head: Tap&Go – 3 T Blade
Handle: loop
Single harness
Weight: 7.3 Kg
ACCESSORIES
For pruning at great heights. Developed for Castelgarden brush
cutters, the accessories make it easier and safer to prune
fruit trees and thin out shrubs and bushes. Branches can be
cut keeping your feet on the ground and using the pruner
or the hedge cutter. As they have low power absorption we
recommend use with models with engines from 28 to 35 cc.
PRUNER
HEDGE CUTTER
PRA Ø 24 mm
PRA Ø 26-28 mm
Bar length: 25 cm
HTA Ø 24 mm
HTA Ø 26 mm
Bar length: 42 cm
* Weight includes nylon head.
43.
BRUSH CUTTERS/
TRIMMERS
PETROL
XB 26 JD
XB 26 D
S
Displacement: 25.4 cc
Power: 0.7 Kw - 1.0 HP
Shaft: 26 mm Joint / 26 mm
Std cutting head: Tap&Go - 3 T Blade
Handle: bike
Double harness
Weight: 6.7 Kg
XB 26 J
XB 26
S
Displacement: 25.4 cc
Power: 0.7 Kw - 1.0 HP
Shaft: 26 mm Joint / 26 mm
Std cutting head: Tap&Go - 3 T Blade
Handle: loop
Single harness
Weight: 6.5 Kg
XR 26 J
S
Double harness.
44.
Tap & Go nylon head Profi.
3 tooth blade.
Single harness.
Displacement: 25.4 cc
Power: 0.7 Kw – 1.0 HP
Shaft: 26 mm curved Joint
Std cutting head: Tap&Go
Handle: loop
Single harness
Weight: 5.8 Kg
Jointable shaft for easy
transportation.
ELECTRIC
The powerful and robust Castelgarden electric grass trimmers are ideal for cutting smaller lawns and
undergrowth and for precise finishing touches under bushes, on path borders, around wall corners and at the
edges of steps and fences. They are quiet and easy to start - you simply push a button. The engine is at the top,
making them very easy to handle. The shaft connects to the engine and controls the trimmer head, where the
plastic lines revolve. The low-noise cutting threads are automatically reset by tapping the trimmer head on the
ground. Take into account your landscape when choosing a trimmer. Trimmers with a straight shaft can reach
beneath bushes and shrubs more easily whereas curved shafts are easy to handle.
XR 11 EL
Power: 1100 Watt - 1.1 kW
Shaft: 25 mm curved
Handle: loop
Standard cutting head: Tap&Go
Single harness
Weight: 5.1 kg
XR 7 EL
Power: 700 Watt - 0.7 kW
Shaft: 25 mm curved
Handle: loop
Standard cutting head: Tap&Go
Single harness
Weight: 5.0 kg
XB 10 J EL
Power: 1000 Watt
Shaft: 25 mm jointable
Handle: loop
Standard cutting head: Tap&Go - 4T blade
Single harness
Weight: 6.0 kg
45.
HEDGE CUTTERS
Regular hedge trimming is an essential part of park, garden and landscape maintenance
to ensure dense, healthy growth and tidy hedges. Castelgarden hedge trimmers
are distinguished by their hard-wearing construction and practical
features. Choose between Castelgarden petrol or electric
hedge cutters depending on the intended use.
46.
PETROL
Castelgarden petrol hedge trimmers have been developed to combine ergonomic design with high quality
and excellent cutting performance. The handle rotates through 90° from left to right, ensuring the best
cutting position at all times.
XHM 75
28 mm
The engine and starter
have been designed so
the machine starts quickly
with minimum effort.
Displacement: 25.4 cc
Power: 0.8 Kw – 1.1 HP
Blade: Single
Blade length: 75 cm
Teeth dist.: 28 mm
Mech. Brake: yes
Anti-vibr.: no
Adj. Handle: no
Weight: 5.4 Kg
XHM 60
28 mm
Anti-vibration system: precisely
calculated spring elements
dampen engine vibrations to
a minimum, reducing fatigue.
Displacement: 25.4 cc
Power: 0.8 Kw – 1.1 HP
Blade: Laser double
Blade length: 60 cm
Teeth dist.: 28 mm
Mech. Brake: yes
Anti-vibr.: yes
Adj. Handle: yes (180°)
Weight: 5.7 Kg
XHJ 550
28 mm
Adjustable rear handle: the
rear handle is adjustable
for easier cutting of hedge
sides and tops.
Displacement: 24.5 cc
Power: 0.9 Kw – 1.2 HP
Blade: Laser double
Blade length: 61 cm
Teeth dist.: 28 mm
Mech. Brake: yes
Anti-vibr.: yes
Adj. Handle: yes (180°)
Weight: 5.4 Kg
grass shear
BATTERY
XGS 60 LI
Easily removable
tooling system.
Battery type: lithium - ions
Battery power: 3.6 v
Grass blade width: 8 cm
Shrub blade length: 16 cm
Charging time: 5 hours
Operating time: 40 min.
Weight: 540 g
Metal gear.
Grass shear blade.
Shrub shear blade.
47.
CHAIN SAWS
Castelgarden chain saws are the handy solution whether you are a homeowner cleaning up a few
trees and branches in the yard or a farmer cutting firewood and keeping the pasture
clear. They are reliable and powerful machines delivering professional
quality and performance for the toughest jobs.
48.
STRATO CLEAN TECHNOLOGY
A selection of the Castelgarden petrol chain saws feature the new
Strato Clean Technology. In a two-stroke conventional engine, part
of the fresh fuel mix is expelled with the exhaust gases during the
combustion phase; this component of unburned fuel mix is the
main cause of high emissions. The Strato Clean Technology is a
layer of pure air interposed between the flow of fuel mix, made
Advantages:
Emission
Conventional
engine
New
engine
up of air plus fuel, and exhaust gases. Because of this layer of
pure air, emissions are 70% lower than those for a conventional
2-stroke engine. In addition, this layer of air ensures the complete
combustion of the fuel mix without any loss of fresh fuel mix (air +
fuel). This brings considerable fuel savings of up to 30% compared
to a conventional engine.
Fuel consumption
Conventional
engine
Noise
Conventional
engine
New
engine
New
engine
Air-head port
Scavenging port
Intake port
Mixture
Air
L
Compact chain saws for small pruning or wood chopping work. These
are the perfect bridge between hobby and agricultural requirements.
XL
Farmers’ chain saws, ideal for agricultural use but also for use in
extreme environments.
XXL
Semi-professional chain saws for tree cutting as well as for demanding
environments.
49.
chain saws
petrol
The Castelgarden petrol chain saw range includes pruning models as well
as semi–professional chain saws. They are all easy to handle, high quality and high
performing. Strato Clean Technology features on some models; these machines are one
step ahead of current European emissions legislation. Castelgarden chain saws are available in
three categories:
F
B
G
E
A
H
C
XC 42 P
D
XL
A -Excellent anti-vibration system.
B -Bar with sprocket nose.
C -Side chain tensioner
D -Adjustable oil pump.
E -Fast idle carburettor. Air lever automatic return.
F -Automatic chain brake system.
G -Easy access to air filter and spark plug w/o tool.
H -Handle isolated from engine.
A -Two-mass
anti-vibration system.
B - Automatic
chain lubrication.
*Weight without bar and chain.
50.
B
A
A
Displacement: 40.1 cc
Power: 1.8 kW - 2.4 HP
Anti-vibration: yes
Bar length: 16” - 40 cm
Chain type : .325”.050” (95VP - 66E)
Oil pump: automatic / adjustable
Weight: 4.4 kg*
XC 68
XXL
Displacement: 62.0 cc
Power: 3.0 kW - 4.2 HP
Bar length: 20” - 50 cm
Chain type: 3/8”.058” (73LP-72 E)
Oil pump: automatic adjustable
Weight: 5.7 kg*
XC 52 P
XXL
Displacement: 50.9 cc
Power: 2.3 kW - 3.1 HP
Bar length: 18” - 45 cm
Chain type: .325”.058” (21BP - 72 E)
Oil pump: automatic
Weight: 5.5 kg*
XC 48 P
XL
Displacement: 48.7 cc
Power: 2.1 kW - 2.9 HP
Bar length: 18” - 45 cm
Chain type: .325”.050” (95VP - 72E)
Oil pump: automatic adjustable
Weight: 5.3 kg*
XC 47 P
XL
Automatic starter.
Displacement: 48.7 cc
Power: 2.1 kW - 2.9 HP
Bar length: 18” - 45 cm
Chain type: .325”.050” (95VP - 72E)
Oil pump: automatic
Weight: 5.3 kg*
Decompression valve.
*Weight without bar and chain.
Metal spikes.
Air lever with automatic
return: a convenient
starting device.
51.
chain saws
petrol
XC 38 P is the smallest chain saw and it is designed for leisure and parttime use. Our main focus, as always, is on the user and the work environment.
For this machine our requirements in terms of safety, function, ergonomics and reliability
are as high as those for professional tools: Simply the best power to weight ratio, high torque and
throttle response, featuring low emission, low noise and fuel economy.
B
C
A
D
E
A -Bar with sprocket nose.
B -Automatic and inertial chain brake.
C -Primer.
D -Fast idle carburettor.
E -Limited vibration with the handle isolated
from the engine by steel springs.
XC 38 P
L
Primer and easily
removable air filter
without tools.
52.
Displacement: 38.3 cc
Power: 1.7 Kw – 2.3 HP
Bar: 16” – 40 cm
Chain: 3/8” .050” (91VG-56E)
Oil pump: automatic
Tensioner: front
Fuel tank: 390 cm3
Oil tank: 240 cm3
Weight: 4.7 Kg
Low emissions and low noise.
E
petrol
The concept of Castelgarden chain saws was born to guarantee some particular features including
handiness, reliability, easy starting and lightness that make them user friendly and pleasant, and assure
high quality and excellent performance. Engines marked by low exhaust emissions is one of the reasons
why Castelgarden chain saws are Euro 2 approved.
XC 4500
XL
Displacement: 45.0 cc
Power: 1.8 kW - 2.4 HP
Bar length: 18” - 45 cm
Chain type: .325”.058” (21BPXO - 72 X)
Oil pump: automatic adjustable
Weight: 5.3 kg*
XC 4000
L
Displacement: 40,1 cc
Power: 1.5 kW - 2.0 HP
Bar length: 16” - 40 cm
Chain type: 3/8”.050” (91PO - 53 X)
Oil pump: automatic adjustable
Weight: 4.6 kg*
XC 3700
L
Displacement: 37,2 cc
Power: 1.2 kW - 1.5 HP
Bar length: 14” - 35 cm /16” - 40 cm
Chain type: 3/8”.050” (91PO - 53 /57 X)
Oil pump: automatic adjustable
Weight: 4.5 kg*
53.
chain saws
XC 27 P
Displacement: 25.4 cc
Power: 1.0 kW - 1.4 HP
Anti-vibration: yes
Bar length: 10” - 25 cm sprocket nose
Chain type: 3/8”.050” (91VG - 40E)
Oil pump: automatic adjustable
Weight: 2.9 kg*
XC 27 PC
Displacement: 25.4 cc
Power: 1.0 kW - 1.4 HP
Anti-vibration: yes
Bar length: 10” - 25 cm carving
Chain type: 1/4”.050” (25AP - 60E)
Oil pump: automatic adjustable
Weight: 2.9 kg*
PRUNING
The Castelgarden pruning models have been designed for
professional use. Compact, well-balanced and light, they
guarantee perfect and fast cutting even for lengthy and intensive
work. The XC 27PC model is designed for tree pruning by
professionals. The carving bar with 1/4” chain allows precise
Balanced ergonomic
handle.
54.
Professional air filter.
The screw allows manual
chain tensioning (model XC
19 PE and XC 22 PE).
and sharp cutting, perfect for grafting and plant maintenance.
Personal protective equipment such as helmets, gloves, visors,
safety footwear and protective overalls must always be worn
when using any of these machines.
electric
Castelgarden electric chain saws are ideal for people who occasionally use saws for light work around
the house. They can deal with trimming of bushes and small branches, as well as cutting down saplings.
They are fun, light, easy to use and quieter than petrol saws. The convenience begins even before you
start cutting, you just plug it in and off and you go. They do not require any specific maintenance. To
store simply place the guard on the bar and wind the cord up. From 1800 to 2000 Watt, with manual or
quick tensioner.
XC 19 PE
XC 22 PE
XC 22 QE
Power 19 PE: 1800 Watt
Power 22 PE / 22 QE: 2000 Watt
Bar length 19 PE: 14” - 35 cm
Bar length 22 QE / 22 PE: 16” - 40 cm
Chain type 19 PE: 3/8” .050” (91VG - 50E)
Chain type 22 QE / 22 PE: 3/8” .050” (91VG - 56E)
Chain tensioning 19 PE / 22 PE:manual
Chain tensioning 22 QE: quick chain tightening
Oil pump: automatic
Oil tank capacity: 200 ml
Weight: 3.9 kg*
EX 200 Q
Power: 2000 Watt
Bar length: 16” - 40 cm
Chain type: 3/8” .050” (91VG - 56E)
Chain tensioning: quick chain tightening
Oil pump: automatic
Oil tank capacity: 200 ml
Weight: 3.9 kg*
EX 180
Power: 1800 Watt
Bar length: 14” - 35 cm
Chain type: 3/8” .050” (91VG - 50E)
Chain tensioning: manual
Oil pump: automatic
Oil tank capacity: 200 ml
Weight: 3.9 kg*
*Weight without bar and chain.
55.
LEAF BLOWERS
Castelgarden power leaf blowers are available in both hand-held and backpack options. Low noise levels
and high volume air output combine to create performance leaf blowers that are also comfortable
to operate. The hand held versions have a large handgrip for use with gloves and
can easily be converted into a vacuum cleaner. The backpack model has
wide angle tube rotation, an extra flexible tube, a variable speed
throttle mounted on the tube with cruise control and shock
absorbers to reduce vibration. The transparent tank
on all three models enables quick checking
of the fuel supply. Blow away your
biggest jobs in less time
with this powerful
Castelgarden
blower.
56.
XBL 620 B
Displacement: 62.0 cc
Power: 3.0 kW - 4.2 HP
Average air vol.: 15.7 m³/min.
Max air speed: 87 m/s
Carburettor: diaphragm rotary valve
Weight: 8.5 kg
XBL 250 H
Displacement: 22.5 cc
Power: 0.9 kW - 1.2 HP
Average air vol.: 10 m³/min.
Max air speed: 67 m/sec
Carburettor: diaphragm
Weight: 4.0 kg
XBL 260 H
Displacement: 25.4 cc
Power: 0.7 kW - 1 HP
Air volume: 7.8 m³/min.
Air speed: 28 m/s
Vaccum kit included
Weight: 5.0 Kg
Vacuum kit
57.
CHIPPER & SHREDDER
Leaves and other vegetation account for a large portion of landfill waste. The chipper and the
shredder cut brush and small branches to a size that is easier to handle and suitable
for composting or mulching, reducing moisture loss and weed regrowth and
improving the appearance of your garden. Shredding leaves and
grass clippings also reduces the time it takes to compost
materials to decay. Both the Castelgarden chipper
and shredder are light-use, electrically
powered models. They differ in terms
of technology and end result,
but are both extremely
useful machines.
58.
58.
BIO POWER
Large collector to collect
and transport chippings.
Knife chipper: knives are double reversible
Powerful motor: 2100 Watt
Capacity for branches: up to 40 mm (inlet opening)
Cutting system: rotating disc with 2 blades
Weight: 19.0 kg
Self-feeding function
Zero current switch
Collector included
Sharp blades for extremely
small wood cutting.
The blade system is based on a rotating disc that
has two blades mounted on the top. The blades cut
branches into small chips.
BIO QUIET
Cuts and crushes the waste
Powerful motor: 2100 Watt
Capacity for branches: up to 45 mm (inlet opening)
Cutting system: silent roller cutter with 8 teeth
Weight: 23.0 kg
Reverse function
Self-feeding function
Zero current switch
Collector included
Comfortable and very easy
to use and transport.
The blades cut and crush
the wood into pieces.
Matter is cut and crushed by a slowly rotating roller with
sharp teeth. The mechanism pulls the branches down and
chips them into rough compost.
59.
SCARIFIER
Scarifying is important to maintain the quality of your lawn. Castelgarden electric scarifier are
easy to use and efficient at removing moss and thatch. Their vertical cutting blades
cut deep grooves into the soil, allowing regenerative oxygen to penetrate
into grass roots. The scarifier cuts the roots into smaller pieces
that then generate new shoots, helping to make your
lawn compact and vigorous.
60.
XSE 32
Power: 1500 Watt, low noise
Working width: 32 cm – 12 knives - Ø 155 mm
Working depth: 5 positions from –10 mm to + 3 mm and transport position
Single lever for convenient changes
of working depth
Collector: 40 litres included
Weight: 20.0 kg
The blades cut deep
grooves into the soil
allowing oxygen
to penetrate into the
grass roots.
It cuts the roots into
small pieces that
generate new shoots.
The grass box collects
the thatch from the
lawn as you go.
Rake
61.
CULTIVATORS
Castelgarden presents its own cultivator range. Their light weight ensures easy manoeuvring.
Easy to start with ergonomic handles to reduce fatigue, and with throttle and
transmission controls mounted on the handles with height adjustment.
These cultivators make tilling your garden easy and bring a
crisp edge to beds. The range includes models for
demanding work in large gardens as well as
machines for smaller areas. There
are also several accessories to
tackle garden jobs from
spring to autumn.
62.
TELLUS 103 B
Specific for cultivating. Powerful engine, a 60 cm rotivator and 2 working gears. Tellus 103 B controls are
simple and ergonomic, easy to use for the hobby user as well.
TELLUS 103 B
Engine type: B&S INTEK OHV 6.5
Transmission: Gears and chain in running oil and belt
Handlebar: Height adjustable
Working width: 60 cm
Drive wheels: 13x5.00-6
Speeds: 2 + 1 reverse
Gross weight: 78 Kg
TELLUS 103 B ATTACHMENTS
Ridging plough
32 cm rotivator
with iron wheels Ø350 x 50
63.
CULTIVATORS
TELLUS 95 B
Tellus 95 B and Tellus 95 H are multifunctional units, with 4-stroke
engine and geared reverse drive. They can be converted from motor cultivators to twin-bladed mowers or 50 cm multifunctional mowers by simply
changing the implements and turning the handlebars.
TELLUS 95 B
TELLUS 95 H
Engine type: B&S 675 series / HONDA GCV 160
Transmission: Worm in oil bath and gears + belts drive
Handlebar: Adjustable & Reversible
Drive wheels: 13x5.00-6
Speeds: 1 + 1 reverse
Gross weight: 55 Kg
TELLUS 95 ATTACHMENTS
64.
Grassland mower 53 cm
Double blade 87 cm cutting bar Snow blade 85 cm
Rear mount rotivator 50 cm
Ridging plough
Front adjustable brush
82 cm with collector
TELLUS 75
TELLUS 75 models are ready to handle the toughest jobs and larger areas. These rugged cultivators
have plenty of horsepower and a well-balanced, easy-to-control design. Fitted with Honda, B&S and
Castelgarden engines they create less vibration and bring faster soil tilling. Two tilling speeds, reverse
and forward for transport, get the work done quickly. So if you are breaking up turf, preparing particularly
difficult soil or turning over a large vegetable garden at the end of the season, the TELLUS models are
ready and willing, and more than capable.
TELLUS 75 RG
TELLUS 75 RH
TELLUS 75 RB
Working width: 75 cm
Rotors: 6
Engine: GGP OHV 182 / Honda GC 160 / B&S 800 series
Speed: 1+1 speed
Handle adjustable in height
Transport wheel in front
Crop protector discs standard
Gross weight: 50 Kg
The TELLUS 75 models with horizontal shaft engines are
equipped with belt and chain transmission in oil bath.
65.
CULTIVATORS
TELLUS 40 / TELLUS 50
TELLUS 40 and TELLUS 50 are forward-rotating cultivators ideal for
many types of garden work - including preparing seedbeds in spring and
maintenance throughout the season. They run more smoothly, more cleanly and
more quietly than comparable tillers. They feature a 40 to 50 cm tilling width, heavy duty
handles and fingertip controls. Their size makes them perfect for working in raised beds and narrow
rows so that your soil stays in top condition all year round. TELLUS is built to last so that you can enjoy
more quality time in your garden for years to come.
TELLUS 50 G
TELLUS 50 RB
Working width: 50 cm
Rotors: 4
Engine: GGP OHV 160 / B&S 625-series
Speed: Single speed / 1+1 speed
Handle adjustable in height/side
Transport wheels at rear
Crop protector discs standard
Gross weight: 41 Kg
TELLUS 40 G
TELLUS 40 RG
Working width: 40 cm
Rotors: 4
Engine: GGP SV 150 / GGP OHV 160
Speed: Single speed / 1+1 speed
Handle adjustable in height
Transport wheels at rear
Gross weight: 29 Kg
TELLUS 40 / 50 models
with a vertical shaft
engine are equipped
with belt and worm gear
transmission in oil bath,
a proven reliable design.
CULTIVATORS ACCESSORIES
66.
De-thatcher.
Scarifier.
Adjustable ridging plough.
Ridging plough.
Rotivator 16 cm.
Kit adjustable spur.
Transport wheels kit.
TELLUS 500 / TELLUS 360 G
The TELLUS 500 and TELLUS 360 G rotary cultivators are the perfect fit for smaller gardens, and offer you
Castelgarden quality at a lower price. With the different attachments, this handy 2-in-1 machine will cultivate
your garden and bring a crisp edge to beds. They are light and easy to operate, and the Castelgarden engine
will not shy away from heavy work.
TELLUS 500 G
TELLUS 500 RG
Working width: 50 cm
Rotors: 4
Engine: GGP OHV 160
Speed: Single speed / 1+1 speed
Worm gear and belt drive transmission
Handle adjustable in height/side
Transport wheel in front
Crop protector discs as standard
Gross weight: 41 Kg
TELLUS 360 G
Working width: 36 cm
Rotors: 4
Engine: GGP SV 150
Speed: Single speed
Worm gear and belt drive transmission
Handle adjustable in height
Transport wheel in front
Gross weight: 25 Kg
ACCESSORIES
TELLUS 360
TELLUS 500
DE-THATCHER
•
RIDGING PLOUGH
•
ROTIVATOR 16 CM
•
•
SCARIFIER
•
•
•
KIT ADJUSTABLE SPUR
•
TRANSPORT WHEELS
•
TELLUS 40
TELLUS 50
TELLUS 75
•
•
•
•
•
•
•
•
•
67.
scythe
68.
scythe PETROL
Tried and tested technology, outstanding cutting performance and exemplary reliability are the inherent
qualities in the new Castelgarden Tellus 87 B scythe mower. This self-propelled sickle bar mower will
cut long grass, tall weeds and light scrub in paddocks, orchards and meadows. It is designed to operate
in conditions where you cannot use an ordinary mower. Equipped with a powerful Briggs & Stratton
625 series engine, the Tellus 87 B has a single mulch bar with height adjustment skids and cutting bar
clutch. 87 cm cutting width and clutched, v-belt drive system. The wheels have solid track grip tyres for
inclines and rough terrain. Weight 54 kg.
TELLUS 87 B
Engine: B&S 625 series
Transmission: worm in oil bath and belts
Speed: single
Recoil starter
Drive wheels: 4.00-6 semi-pneumatic
Cutting bar: 87 cm with easy connection system
Gross weight: 54 kg
Lever on handlebars
disengages wheels and
mowing bar.
69.
TECHNICAL DATA
lawn
TRACTORS
MODEL
PE 60 VD
PG 140
PG 140 HD
PT 140
PT 170 HD
PTC 220 HD
ENGINE
B&S, 850 series 190 cc
(manual start)
B&S, P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 3130 AVS 344 cc
(single cylinder)
B&S. P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 4165 AVS 500 cc
(single cylinder)
TRANSMISSION
Variator
Gear
Hydro
Gear
Hydro
B&S, Intek series 7220 V-Twin 656 cc
Hydro
B&S, 875 Series ES cut pro 190 cc
Variator
CUTTING
SYSTEM
CUTTING
POSITIONS
63 cm
rear discharge
92 cm
rear discharge
92 cm
rear discharge
102 cm
rear discharge
102 cm
rear discharge
102 cm
rear discharge
5 pos.
from 30 to 75 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 30 to 90 mm
63 cm
rear discharge
72 cm
rear discharge
72 cm
rear discharge
92 cm
rear discharge
92 cm
rear discharge
98 cm
side discharge
98 cm
side discharge
108 cm
side discharge
108 cm
side discharge
102 cm, rear discharge
with new antiscalp wheels
102 cm, rear discharge
with new antiscalp wheels
102 cm, rear discharge
with new antiscalp wheels
122 cm, rear discharge
with new antiscalp wheels
122 cm, rear discharge
with new antiscalp wheels
New HE 122 cm deck
rear discharge
New HE 102 cm deck
rear discharge
New HE 122 cm deck
rear discharge
5 pos.
from 30 to 75 mm
7 pos.
from 30 to 80 mm
7 pos.
from 30 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 30 to 90 mm
7 pos.
from 30 to 90 mm
7 pos.
from 30 to 90 mm
7 pos.
from 30 to 90 mm
7 pos.
from 30 to 90 mm
9 pos.
from 25 to 100 mm
9 pos.
from 25 to 100 mm
9 pos.
from 25 to 100 mm
63 cm
rear discharge
72 cm
rear discharge
92 cm
rear discharge
92 cm
rear discharge
102 cm, rear discharge
with new antiscalp wheels
New HE 122 cm deck
rear discharge
5 pos.
from 30 to 75 mm
7 pos.
from 30 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 25 to 80 mm
7 pos.
from 30 to 90 mm
9 pos.
from 25 to 100 mm
BLADE
ENGAGEMENT
COLLECTION
CAPACITY
Manual
140 l
Electromagnetic clutch
260 l
Electromagnetic clutch
260 l
Electromagnetic clutch
260 l
Electromagnetic clutch
260 l
Electromagnetic clutch
300 l
Manual
140 l
Manual
170 l
Manual
170 l
Electromagnetic clutch
260 l
Electromagnetic clutch
260 l
Electromagnetic clutch
-
Electromagnetic clutch
-
Electromagnetic clutch
-
Electromagnetic clutch
-
Electromagnetic clutch
New 320 l
Electromagnetic clutch
New 320 l
Electromagnetic clutch
New 320 l
Electromagnetic clutch
New 320 l
PTC 220 HD
XE 80 VD
XF 140
XF 140 HD
XG 140 HD
XG 170 HD
XD 140
XD 140 HD
XDL 170
XDL 190 HD
XT 170 HD
XT 190 HD
B&S , P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 4165 AVS 500 cc
(single cylinder)
B&S, P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 3130 AVS 344 cc
(single cylinder)
B&S, P.B. series 4165 AVS 500 cc
(single cylinder)
B&S, P.B. series 4185 AVS 500 cc
(single cylinder)
B&S, P.B. series 4165 AVS 500 cc
(single cylinder)
B&S, Intek series 4185 AVS 500 cc
(single cylinder)
Gear
Hydro
Hydro
Hydro
Gear
Hydro
Gear
Hydro
Hydro
Hydro
XT 220 HD
B&S, Intek series 7220 V-Twin 656 cc
Hydro
XX 220 HD
B&S, Intek series 7220 V-Twin 656 cc
Hydro
XX 220 HDE
B&S, Intek series 7220 V-Twin 656 cc
Hydro
XHX 240
B&S, Intek 8240 V-Twin 724 cc
Hydro 2WD
XHT 220 4WD
B&S, Intek 7220 V-Twin 656 cc
Hydro 4WD
XHX 240 4WD E
B&S, Intek 8240 V-Twin 724 cc
Hydro 4WD
Honda, GCV 190 E .S.
Variator
XF 135 HD
Honda, GXV 390 (single cylinder)
Hydro
XG 135 HD
Honda, GXV 390 (single cylinder)
Hydro
XG 175 HD
Honda, GCV 530 Twin-cylinder
Hydro
XT 175 HD
Honda, GCV 530 Twin-cylinder
Hydro
XHX 255 4WD
Honda, GXV 660 Twin-cylinder
Hydro 4WD
XE 75 VD
"7 pos.
70.
Electromagnetic clutch
Electromagnetic clutch
Electromagnetic clutch
320 l
electric dump
360 l
360 l
Electromagnetic clutch
360 l
electric dump
Manual
140 l
Manual
170 l
Electromagnetic clutch
260 l
Electromagnetic clutch
260 l
Electromagnetic clutch
New 320 l
Electromagnetic clutch
360 l
ALARM FULL
COLLECTOR
HEADLIGHTS
WHEEL
DIMENSIONS
ADJUSTABLE
SEAT
DASHBOARD
BATTERY
CHARGER
GROSS WEIGHT
ACCESSORIES
INCLUDED
no
-
11" X 13"
Standard junior
-
-
120 kg
-
yes
twin headlights
15" X 18"
Standard junior
1 LED
Optional
222 kg
-
yes
twin headlights
15" X 18"
Standard junior
1 LED
Optional
226 kg
-
yes
twin headlights
15" X 18"
Standard junior
1 LED
Included
250 kg
-
yes
twin headlights
15" X 18"
Standard junior
1 LED
Included
256 kg
-
yes
twin headlights
15" X 18"
Standard plus
8 LED
Optional
276 kg
-
no
-
11" X 13"
Castelgarden
-
Included
125 kg
-
no
-
11" X 15" steel rim
Castelgarden
1 LED
Included
185 kg
-
no
-
11" X 15" steel rim
Castelgarden
1 LED
Included
193 kg
-
yes
twin headlights
15" X 18"
Castelgarden
6 LED
Included
221 kg
Trailer hitch
yes
twin headlights
15" X 18"
Castelgarden
6 LED
Included
230 kg
Trailer hitch
no
twin headlights
15" X 18"
-
Included
198 kg
no
twin headlights
15" X 18"
-
Included
200 kg
no
twin headlights
15" X 18"
-
Included
202 kg
no
twin headlights
15" X 18"
-
Included
204 kg
yes
twin headlights
15" X 18"
6 LED
Included
274 kg
yes
twin headlights
15" X 18"
Included
275 kg
yes
twin headlights
15" X 18"
Included
278 kg
yes
twin headlights
15" X 18"
Included
288 kg
yes
twin headlights
15" X 18"
Included
290 kg
SD with comfort
back-rest
SD with comfort
back-rest
SD with comfort
back-rest
SD with comfort
back-rest
Castelgarden
comfort
Castelgarden
comfort
Castelgarden
comfort
Castelgarden
comfort
Castelgarden
comfort
Castelgarden
comfort
New Comfort seat with
arm rest
New Comfort seat with
arm rest
6 LED
with display
6 LED
with display
6 LED
with display
6 LED
with display
6 LED
with display
6 LED
with display
6 LED
with display
Included
New 22 Ah battery
Included
New 22 Ah battery
Included
New 22 Ah battery
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
yes
twin headlights
16" X 20"
yes
twin headlights
16" X 20"
yes
twin headlights
16" X 20"
no
-
11" X 13"
Castelgarden
-
Included
123 kg
-
no
-
11" X 15" steel rim
Castelgarden
1 LED
Included
196 kg
-
yes
twin headlights
15" X 18"
Castelgarden
6 LED
Included
231 kg
Trailer hitch
yes
twin headlights
15" X 18"
Castelgarden
6 LED
Included
232 kg
yes
twin headlights
15" X 18"
Castelgarden comfort
yes
twin headlights
16" X 20"
New Comfort seat with
arm rest
6 LED
with display
6 LED
with display
337 kg
352 kg
357 kg
Included
287 kg
Included
New 22 Ah battery
361 kg
GENUINE
PARTS
Trailer hitch
Mulching kit
Trailer hitch
Mulching kit
Trailer hitch
GGP recommends the use
of genuine spare parts
71.
TECHNICAL DATA
FRONT
MOWERS
MODEL
ENGINE
TRANSMISSION
CUTTING
WIDTH
CUTTING
HEIGHT
XM 130
B&S, P.B. series 3115 AVS
5+R
Front wheel drive
85 cm
25-85 cm
Manual adjustment
XM 140 HD
B&S, P.B. series 3130 AVS
Hydro
Front wheel drive
85-95 cm
25-85
Manual adjustment
XM 160 HD
B&S, P.B. series 4155 AVS
Hydro
Front wheel drive
85-105 cm
25-85 cm
Manual adjustment
XK 140 HD
B&S, P.B. series 3130 AVS
Hydro
Rear wheel drive
95 cm
25-85 cm
Manual adjustment
XK 160 HD
B&S, P.B. series 4155 AVS
Hydro
Rear wheel drive
95-105 cm
25-85 cm
Manual adjustment
XK4 160 HD
B&S, P.B. series 4155 AVS
Hydro
4 wheel drive
95-105 cm
25-85 cm
Manual adjustment
LAWN MOWERS
PROFESSIONAL
ENGINE
RPM CONTROL/
DASHBOARD
DECK
MATERIAL
CUTTING
WIDTH
XSPW 52 MBS
B&S 675 series XRZ
Ready Start
Accelerator on handle
Galvanized steel
48 cm
4-in-1 cutting system
XSPW 52 MBS BBC
B&S 675 series XRZ
Ready Start
Accelerator on handle
Galvanized steel
48 cm
4-in-1 cutting system
XSPW 52 MBS INOX
B&S 750 series DOV
Ready Start
Accelerator on handle
Stainless steel
48 cm
4-in-1 cutting system
XSPW 57 MBS
B&S 750 series DOV
Ready Start
Accelerator on handle
Galvanized steel
53 cm
4-in-1 cutting system
XSPW 52 MHS
Honda GCV 160
autochoke
Accelerator on handle
Galvanized steel
48 cm
4-in-1 cutting system
XSPW 52 MHS BBC
Honda GCV 160
autochoke
Accelerator on handle
Galvanized steel
48 cm
4-in-1 cutting system
XSPW 57 MHS BBC
Honda GCV 190
autochoke
Accelerator on handle
Galvanized steel
53 cm
4-in-1 cutting system
B&S 750 series DOV
Ready Start
Accelerator on handle
Aluminum
50,5 cm
Pro blade
Honda GXV 160
Accelerator on handle
Aluminum
50,5 cm
Pro blade
MODEL
PRO 60 MB
PRO 60 MHV BBC
72.
CUTTING
METHOD
WASHING
POSITION
STEERING
ADJUSTABLE
SEAT
WEIGHT
Multiclip/Rear discharge
Yes
Mechanical
Comfort
166 kg
Multiclip/Rear discharge
Yes
Mechanical
Comfort
169 kg
Multiclip/Rear discharge
Yes
Mechanical
Comfort
174 kg
Multiclip/Rear discharge
Yes
Mechanical
Comfort
164 kg
Multiclip/Rear discharge
Yes
Mechanical
Comfort
172 kg
Multiclip/Rear discharge
Yes
Mechanical servo
Comfort
200 kg
CUTTING
POSITIONS
DRIVING
COLLECTOR
WHEELS
DIMENSIONS
SPEED
VARIATOR
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
6 pos., 22 - 95
Self propelled
Hybrid 75Lt
210/300
Ball bearings
-
Centralized
5 pos., 26 - 76
Self propelled
Textile 80 Lt
200/250 PRO
Ball bearings
-
Centralized
5 pos., 26 - 76
Self propelled
Textile 80 Lt
200/250 PRO
Ball bearings
3 Speed
GENUINE
PARTS
GGP recommends the use
of genuine spare parts
73.
TECHNICAL DATA
LAWN
MOWERS
MODEL
ENGINE
SPEED CONTROL/
DASHBOARD
DECK
MATERIAL
XP 50 HS
GCV 160
autochoke
Accelerator on dashboard
ABS
XS 50 MH
GCV 135
Accelerator on handle
XS 50 MHS
GCV 135
Accelerator on handle
XS 55 MHS
XSW 50 MHS
XSW 55 MHS
XA 52 MHS
XA 55 MHS
XA 55 MHS BBC
XSI 55 MHS INOX
XSIW 55 MHS 4 INOX
GCV 160
autochoke
GCV 160
autochoke
GCV 190
autochoke
GCV 160
autochoke
GCV 190
autochoke
GCV 190
autochoke
GCV 160
autochoke
GCV 190
autochoke
Accelerator on handle
Accelerator on handle
Accelerator on handle
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Accelerator on handle
Aluminium
Accelerator on handle
Aluminium
Accelerator on handle
Aluminium
Accelerator on dashboard
Stainless steel
Accelerator on handle
Stainless steel
CUTTING
WIDTH
46 cm
High lift blade
46 cm, Mulching kit
Skid plate
46 cm, Mulching kit
Skid plate
51 cm, Mulching kit
Skid plate
46 cm, Mulching kit
Skid plate
51 cm, Mulching kit
Skid plate
48 cm
Mulching kit
51 cm
Mulching kit
51 cm
Mulching kit
51 cm
Mulching kit
51 cm
Mulching kit
LAWN
MOWERS
MODEL
ENGINE
RPM CONTROL/
DASHBOARD
DECK
MATERIAL
XP 50 B
625 series XRZ
Accelerator on dashboard
ABS
XP 50 BS
625 series XRZ
Accelerator on dashboard
ABS
XS 50 MB
625 series XRZ
Accelerator on dashboard
XS 50 MBS
625 series XRZ
Accelerator on dashboard
XS 55 MBS
650 series XRZ
Ready Start
Accelerator on dashboard
XSW 50 MBS
625 series XRZ
Accelerator on dashboard
XSW 55 MBS
XSW 55 MBSQ
XSM 52 B
XSM 52 BS
XA 52 MBS
74.
675 series XRZ
Ready Start
675 series XRZ
Ready Start
675 series XRZ
Ready Start
675 series XRZ
Ready Start
675 series XRZ
Ready Start
Accelerator on dashboard
Accelerator on dashboard
Accelerator on handle
Accelerator on handle
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Galvanized Steel
(Hammered)
Accelerator on handle
Aluminium
XA 55 MBS
750 series DOV
Accelerator on handle
Aluminium
XA 55 MBS BBC
750 series DOV
Accelerator on handle
Aluminium
XSIW 55 MBS INOX
650 Series XRZ
Ready start
Accelerator on dashboard
Stainless steel
XSIW 55 MBS 4 INOX
750 series DOV
Accelerator on handle
Stainless steel
CUTTING
WIDTH
46 cm
High lift blade
46 cm
High lift blade
46 cm, Mulching kit
Skid plate
46 cm, Mulching kit
Skid plate
51 cm, Mulching kit
Skid plate
46 cm, Mulching kit
Skid plate
51 cm, Mulching kit
Skid plate
51 cm, Mulching kit
Skid plate, 4-in-1 cutting system
48 cm
Mulching
48 cm
Mulching
48 cm
Mulching kit
51 cm
Mulching kit
51 cm
Mulching kit
51 cm
Mulching kit
51 cm
Mulching kit
CUTTING
POSITIONS
2 levers
5 pos., 20 - 70
Centralized
6 pos., 25 - 75
Centralized
6 pos., 25 - 75
Centralized
6 pos., 25 - 75
Centralized
6 pos., 25 - 90
Centralized
6 pos., 25 - 90
Centralized
6 pos., 30 - 80
Centralized
7 pos., 30 - 80
Centralized
7 pos., 30 - 80
Centralized
5 pos., 30 - 75
Centralized
6 pos., 30 - 90
CUTTING
POSITIONS
2 levers
5 pos., 20 - 70
2 levers
5 pos., 20 - 70
Centralized
6 pos., 25 - 75
Centralized
6 pos., 25 - 75
Centralized
6 pos., 25 - 75
Centralized
6 pos., 25 - 90
Centralized
6 pos., 25 - 90
Centralized
6 pos., 25 - 90
4 levers
5 pos., 31 - 75
3 levers
5 pos., 31 - 75
Centralized
6 pos., 30 - 80
Centralized
7 pos., 30 - 80
Centralized
7 pos., 30 - 80
Centralized
6 pos., 30 - 90
Centralized
6 pos., 30 - 90
DRIVING
COLLECTOR
Self propelled
Hybrid 70Lt
Push
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
DRIVING
COLLECTOR
Push
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Push
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Push
-
Self propelled
-
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
Self propelled
Hybrid 70Lt
WHEELS
DIMENSIONS
SPEED
VARIATOR
170/210
Ball bearings
200/200
Ball bearings
200/200
Ball bearings
200/200
Ball bearings
200/280
Ball bearings
200/280
Ball bearings
170/210
Ball bearings
170/210
Ball bearings
170/210
Ball bearings
170/210
Ball bearings
210/300
Ball bearings
4 Speed
WHEELS
DIMENSIONS
SPEED
VARIATOR
170/210
Ball bearings
170/210
Ball bearings
200/200
Ball bearings
200/200
Ball bearings
200/200
Ball bearings
200/280
Ball bearings
200/280
Ball bearings
200/280
Ball bearings
210/210
Ball bearings
210/210
Ball bearings
170/210
Ball bearings
170/210
Ball bearings
170/210
Ball bearings
210/300
Ball bearings
210/300
Ball bearings
4 Speed
GENUINE
PARTS
GGP recommends the use
of genuine spare parts
75.
TECHNICAL DATA
LAWN MOWERS
SPECIAL EDITION
MODEL
ENGINE /
ELECTRIC MOTOR
RPM CONTROL/
DASHBOARD
DECK
MATERIAL
CUTTING
WIDTH
XSE 45 B
B&S 450 series
Fix RPM
Steel
41 cm
XSEW 50 B
B&S 500 series XQ
Accelerator on handle
Steel
46 cm
XSEW 50 BS
B&S 500 series XQ
Accelerator on handle
Steel
46 cm
XSE 55 BS
B&S 625 series XLS
Accelerator on handle
Steel
51 cm
XSEW 55 BSQ
B&S 650 series XLS
Ready Start
Accelerator on handle
Steel
51 cm, Mulching kit
4-in-1 cutting system
XSEW 55 HSQ
Honda GCV 160
Accelerator on handle
Steel
51 cm, Mulching kit
4-in-1 cutting system
MODEL
ELECTRIC
MOTOR
RPM CONTROL/
DASHBOARD
DECK
MATERIAL
CUTTING
WIDTH
XP 37 EL
1000W 230V
Spark cover
-
Polypropylene
33 cm
XP 41 EL
1300W 230V
Spark cover
-
Polypropylene
37 cm
XPL 41 EL
1500W 230V
NCL cover
-
Polypropylene
37 cm
XPL 43 EL
1600W 230V
NCL cover
-
Polypropylene
39 cm
XSW 50 EL
1600W 230V
Castel cover
-
Galvanized Steel
(Hammered)
46 cm
Skid plate
XSW 50 ELS
1800W 230V
Castel cover
-
Galvanized Steel
(Hammered)
46 cm
Skid plate
ELECTRIC
LAWN MOWERS
76.
CUTTING
POSITIONS
DRIVING
COLLECTOR
WHEELS
DIMENSIONS
SPEED
VARIATOR
4 levers
5 pos., 27 - 80
Push
Plastic 60 Lt
180/180
Ball bearings
-
4 levers
5 pos., 27 - 80
Push
Plastic 60 Lt
180/240
Ball bearings
-
3 levers
5 pos., 27 - 80
Self propelled
Plastic 60 Lt
180/240
Ball bearings
-
Centralized
6 pos., 25 - 75
Self propelled
Plastic 60 Lt
200/200
Ball bearings
-
Centralized
6 pos., 25 - 90
Self propelled
Plastic 60 Lt
200/280
Ball bearings
-
Centralized
6 pos., 25 - 90
Self propelled
Plastic 60 Lt
200/280
Ball bearings
-
CUTTING
POSITIONS
DRIVING
COLLECTOR
WHEELS
DIMENSIONS
SPEED
VARIATOR
screw in screw out 3 pos., 25 - 55
Push
Plastic 27 Lt
130/160
-
screw in screw out 3 pos., 25 - 55
Push
Plastic 35 Lt
130/160
-
Centralized
5 pos., 18 - 60
Push
Hybrid 40 Lt
130/160
Wide pattern
-
Centralized
5 po.s, 21 - 60
Push
Hybrid 45 Lt
165/190
Wide pattern, bushes
-
2 levers
6 pos., 25 - 90
Push
Hybrid 70Lt
200/280
Ball bearings
-
2 levers
6 pos., 25 - 90
Self propelled
Hybrid 70Lt
200/280
Ball bearings
-
GENUINE
PARTS
GGP recommends the use
of genuine spare parts
77.
TECHNICAL DATA
PETROL
BRUSH CUTTERS
MODEL
DISPLACEMENT
POWER
SHAFT
XR 26 J
25.4 cc
0.7 kW - 1 HP
26 mm curved joint
XB 26 J
25.4 cc
0.7 kW - 1 HP
26 mm joint
XB 26
25.4 cc
0.7 kW - 1 HP
26 mm
XB 26 JD
25.4 cc
0.7 kW - 1 HP
26 mm joint
XB 26 D
25.4 cc
0.7 kW - 1 HP
26 mm
XB 34
32.6 cc
0.9 kW - 1.2 HP
26 mm
XB 34 D
32.6 cc
0.9 kW - 1.2 HP
26 mm
BJ 345
42.7 cc
1.3 kW - 1.8 HP
26 mm
BJ 345 D
42.7 cc
1.3 kW - 1.8 HP
26 mm
XB 29 S
25.6 cc
0.9 kW - 1.2 HP
24 mm
XB 29 DS
25.6 cc
0.9 kW - 1.2 HP
24 mm
XB 35 S
32.6 cc
1.1 kW - 1.5 HP
26 mm
XB 35 DS
32.6 cc
1.1 kW - 1.5 HP
26 mm
XB 43 S
42.7 cc
1.4 kW - 1.9 HP
26 mm
XB 43 DS
42.7 cc
1.4 kW - 1.9 HP
28 mm
XB 51 S
47.1 cc
2 kW - 2.7 HP
26 mm
XB 51 DS
47.1 cc
2 kW - 2.7 HP
28 mm
XB 43 FS
42.7 cc
1.4 kW - 1.9 HP
28 mm
XB 51 FS
47.1 cc
2 kW - 2.7 HP
28 mm
XR 425 HJ
25 cc
0.8 kW - 1.1 HP
26 mm curved joint
XB 425 H
25 cc
0.8 kW - 1.1 HP
26 mm
XB 425 HD
25 cc
0.8 kW - 1.1 HP
26 mm
XB 435 H
35 cc
1.2 kW - 1.6 HP
26 mm
XB 435 HD
35 cc
1.2 kW - 1.6 HP
26 mm
MODEL
ELECTRIC MOTOR
POWER
SHAFT
XR 7 EL
700 Watt
0,7 kW
25 mm curved
XB 10 JEL
1 000 Watt
1,0 kW
25 mm joint
XR 11 EL
1 100 Watt
1,1 kW
25 mm curved
ELECTRIC
TRIMMERS
78.
BLADE
NYLON HEAD
HANDLE
HARNESS
WEIGHT
-
Tap & Go
Loop
Single
5.8 kg
3 teeth
Tap & Go
Loop
Single
6.5 kg
3 teeth
Tap & Go
Loop
Single
6.5 kg
3 teeth
Tap & Go
Bike
Double
6.7 kg
3 teeth
Tap & Go
Bike
Double
6.7 kg
3 teeth
Tap & Go
Loop
Single
7.3 kg
3 teeth
Tap & Go
Bike
Double
7.5 kg
4 teeth
Tap & Go
Loop
Single
7.8 kg
4 teeth
Tap & Go
Bike
Double
8.5 kg
3 teeth
Tap & Go
Loop
Single
5.6 kg
3 teeth
Tap & Go
Bike
Single
6.0 kg
4 teeth
Tap & Go
Loop
Single
7.2 kg
4 teeth
Tap & Go
Bike
Double
7.9 kg
4 teeth
Tap & Go
Loop
Single
8.3 kg
4 teeth
Tap & Go
Bike
Double comfort
9.0 kg
4 teeth
Tap & Go
Loop
Single
8.4 kg
4 teeth
Tap & Go
Bike
Double comfort
9.1 kg
4 teeth
Tap & Go
Loop
Back pack
11.9 kg
4 teeth
Tap & Go
Loop
Back pack
12.0 kg
-
Tap & Go
Loop
Single
5.8 kg
3 teeth
Tap & Go
Loop
Single
7.2 kg
3 teeth
Tap & Go
Bike
Single
8.1 kg
4 teeth
Tap & Go
Loop
Single
9.8 kg
4 teeth
Tap & Go
Bike
Double
10.6 kg
BLADE
NYLON HEAD
HANDLE
HARNESS
WEIGHT
-
Tap & Go
Loop
Single
5 kg
4 Teeth
Tap & Go
Loop
Single
6 kg
-
Tap & Go
Loop
Single
5.1 kg
GENUINE
PARTS
GGP recommends the use
of genuine spare parts
79.
TECHNICAL DATA
PETROL
HEDGECUTTERS
MODEL
DISPLACEMENT
POWER
BLADE
LENGTH
TEETH
DISTANCE
BLADE
BRAKE
WEIGHT
XHM 75
25.4 cc
0.8 kW - 1.1 HP
75 cm
28 mm
Yes
5.4 kg
XHM 60
25.4 cc
0.8 kW - 1.1 HP
60 cm
28 mm
Yes
5.7 kg
XHJ 550
24.5 cc
0.9 kW - 1.2 HP
61 cm
28 mm
Yes
5.4 kg
GRASS SHEAR
POWER
ACCUMULATOR
TYPE
SHRUB LENGTH
SHEAR WIDTH
WORKING TIME
WEIGHT
3,6 V
5 hour recharging time
1.1 Ah
160 mm
80 mm
40 min
0.54 kg
MODEL
XGS 60 LI
PETROL
CHAINSAWS
MODEL
DISPLACEMENT
POWER
BAR
LENGTH
CHAIN TYPE
OIL PUMP
WEIGHT*
XC 27 P
25.4 cc
1 kW - 1.4 HP
10" -25 cm
3/8".050" (91VG-40E)
automatic / adjustable
2.9 kg
XC 27 PC
25.4 cc
1 kW - 1.4 HP
10" -25 cm
Carving
1/4".050" (25AP-60E)
automatic / adjustable
2.9 kg
XC 3700
37.2 cc
1.2 kW - 1.5 HP
14"/16” -35 cm / 40 cm
3/8'' .050'' (91P0-53/57X)
automatic / adjustable
4.5 kg
XC 4000
40.1 cc
1.5 kW - 2.0 HP
16" -40 cm
3/8'' .050'' (91P0-57X)
automatic / adjustable
4.6 kg
XC 4500
45.0 cc
1.8 kW - 2.4 HP
18" -45 cm
.325'' .058'' (21BPX0-72X)
automatic / adjustable
5.3 kg
XC 38 P
38.3 cc
1.7 kW - 2.3 HP
16" -40 cm
3/8'' .050'' (91VG-56E)
automatic
4.7 kg
XC 42 P
40.1 cc
1.8 kW - 2.4 HP
16" -40 cm
.325".050" (95VP-66E)
automatic / adjustable
4.4 kg
XC 47 P
48.7 cc
2.1 kW - 2.9 HP
18" -45 cm
.325".050" (95VP-72E)
automatic
5.3 kg
XC 48 P
48.7 cc
2.1 kW - 2.9 HP
18" -45 cm
.325".050" (95VP-72E)
automatic / adjustable
5.3 kg
XC 52 P
50.9 cc
2.3 kW - 3.1 HP
18" -45 cm
.325".058" (21BP-72E)
automatic
5.5 kg
XC 68
62.0 cc
3 kW - 4.2 HP
20" -50 cm
3/8".058" (73LP-72E)
automatic / adjustable
5.7 kg
*Weight without bar and chain.
80.
ELECTRIC
CHAINSAWS
MODEL
ELECTRIC
MOTOR
POWER
BAR
LENGTH
CHAIN TYPE
TENSIONER
WEIGHT*
EX 180
1800 Watt
1.8 kW
14" -35 cm
3/8".050" (91VG-50E)
manual
3.9 kg
EX 200 Q
2000 Watt
2 kW
16" -40 cm
3/8".050" (91VG-56E)
Quick - tensioner
3.9 kg
XC 19 PE
1800 Watt
1.8 kW
14" -35 cm
3/8".050" (91VG-50E)
manual
3.9 kg
XC 22 PE
2000 Watt
2 kW
16" -40 cm
3/8".050" (91VG-56E)
manual
3.9 kg
XC 22 QE
2000 Watt
2 kW
16" -40 cm
3/8".050" (91VG-56E)
Quick - tensioner
3.9 kg
*Weight without bar and chain.
LEAF
BLOWERS
DISPLACEMENT
POWER
AVERAGE
AIR SPEED
MAX
SPEED AIR
VACUUM
KIT
WEIGHT
XBL 260 H
25.4 cc
0.7 kW - 1 HP
7.8 m3/min
28 m/s
included
5.0 kg
XBL 250 H
22.5 cc
0.9 kW - 1.2 HP
10 m3/min
67 m/s
-
4.0 kg
XBL 620 B
62.0 cc
3 kW - 4.2 HP
15.7 m3/min
87 m/s
-
8.5 kg
MODEL
CHIPPER
SHREDDER
ELECTRIC
MOTOR
POWER
CUTTING
SYSTEM
CAPACITY
FOR BRANCHES
COLLECTOR
WEIGHT
BIO POWER
2100 Watt
2.1 kW
Rotating disc with 2 blades
40 mm
included
19.0 kg
BIO QUIET
2100 Watt
2.1 kW
Roller cutter with 8 teeth
45 mm
included
23.0 kg
MODEL
SCARIFIERS
MODEL
ELECTRIC
MOTOR
POWER
WORKING
WIDTH
NUMBER
OF KNIVES
WORKING
DEPTH
COLLECTOR
WEIGHT
XSE 32
1500 Watt
1.5 kW
32 cm
12
5 positions
40 Lt
20.0 kg
GENUINE
PARTS
GGP recommends the use
of genuine spare parts
81.
TECHNICAL DATA
CULTIVATORS
MODEL
ENGINE
DISPLACEMENT
GEAR BOX
TRANSMISSION
TELLUS 360 G
GGP SV 150
150 cc
1 speed
Worm screw in oil bath + belt
TELLUS 500 G
GGP OHV 160
160 cc
1 speed
Worm screw in oil bath + belt
GGP OHV 160
160 cc
1 speed
+ reverse
Worm screw in oil bath + belt
GGP SV 150
150 cc
1 speed
Worm screw in oil bath + belt
TELLUS 40 RG
GGP OHV 160
160 cc
1 speed
+ reverse
Worm screw in oil bath + belt
TELLUS 50 G
GGP OHV 160
160 cc
1 speed
Worm screw in oil bath + belt
1 speed
+ reverse
Worm screw in oil bath + belt
TELLUS 500 RG
TELLUS 40 G
TELLUS 50 RB
B&S 625 series
190 cc
TELLUS 75 RG
GGP OHV 182
182 cc
TELLUS 75 RH
HONDA GC 160
160 cc
TELLUS 75 RB
B&S 800 series
205 cc
ENGINE
DISPLACEMENT
TELLUS 95 B
B&S 675 series
190 cc
TELLUS 95 H
HONDA GCV 160
160 cc
TELLUS 103 B
B&S INTEK OHV 6.5
206 cc
1 speed
+ reverse
1 speed
+ reverse
1 speed
+ reverse
Case chain in running oil + belt
Case chain in running oil + belt
Case chain in running oil + belt
CULTIVATORS
MODEL
GEAR BOX
1 speed
+ reverse
1 speed
+ reverse
2 speed
+ reverse
TRANSMISSION
Worm screw in oil bath + belt
Worm screw in oil bath + belt
Case chain in running oil + belt
PETROL SCYTHE
MODEL
TELLUS 87 B
82.
ENGINE
DISPLACEMENT
GEAR BOX
TRANSMISSION
B&S 625 series
190 cc
1 speed
Worm screw in oil bath + belt
ADJUSTABLE
HANDLEBAR
WORKING
WIDTH
TRANSPORT
WHEEL
GROSS WEIGHT
Height
36 cm
In front
25 kg
Height / side
50 cm
In front
41 kg
Height / side
50 cm
In front
41 kg
Height
40 cm
At rear
29 kg
Height
40 cm
At rear
29 kg
Height / side
50 cm
At rear
41 kg
Height / side
50 cm
At rear
41 kg
Height
75 cm
In front
50 kg
Height
75 cm
In front
50 kg
Height
75 cm
In front
50 kg
ADJUSTABLE
HANDLEBAR
WORKING
WIDTH
PNEUMATIC DRIVE
WHEELS
GROSS WEIGHT
Height / reversible
-
13X5,00-6
55 kg
Height / reversible
-
13X5,00-6
55 kg
Height
60 cm
13X5,00-6
78 kg
ADJUSTABLE
HANDLEBAR
PNEUMATIC DRIVE WHEELS
CUTTING WIDTH
GROSS WEIGHT
Height
4.00 - 6
87 cm
54 kg
GENUINE
PARTS
GGP recommends the use
of genuine spare parts
83.
OFFICIAL GENUINE PARTS
Quality & Safety
This new range of Accessories is born from the long experience of Castelgarden in
manufacturing and development of garden machinery and is suitable for the most
important models of tractors and walk-behinds. Developed together with the machines,
these accessories enable you to always obtain high performance in total safety.
Strict tests, careful checks during all the processes, high quality of the raw materials used
and the perfect applicability for the machines are the fundamental elements which make
Castelgarden Genuine Accessories different from other general after-market products.
Only Castelgarden Genuine Accessories are tested and approved by the home-factory
and this ensures total safety during use, especially for potentially dangerous components, such as blades. For these reasons, during all maintenance it is essential that
broken or damaged parts only be replaced by Genuine Accessories.
A Castelgarden Genuine Accessory is distinguished by a seal, on each pack which
guarantees the authenticity; all the technical and fitting information can be easily
found on the label on each pack.
Castelgarden Genuine accessories: Guaranteed quality and safety.
84.
Blades
A complete range of blades for different cutting procedures,
always in total safety. All Castelgarden Genuine blades are tested
and only approved if they stand the impact test to guarantee
the user’s safety even in the event of accidental clashes against
stones, rocks or other hidden obstacles. Mulching blades mince
grass clippings into small particles that remain in the grass,
becoming nutrient for the lawn. The special collecting blade has a
fin on each tip to facilitate the down flow of cut grass, through the
exhaust chute, up to the grass catcher.
CODE
QUANTITY
IN THE PACK
1134-9622-01
1
XE
62
MULCHING
1134-9623-01
1
XF
72
MULCHING
1134-9624-01
2
XJ-XG
46
COLLECTING
1134-9625-01
2
XL-XD (2010)
49
MULCHING
1134-9630-01
2
XDL
53
MULCHING
1134-9626-01
2
XT-XHT (2010)
52
COLLECTING
1134-9627-01
2
XX-XHX (2010)
62
MULCHING
1111-9608-01
1
XP 37
33
COLLECTING
1111-9609-01
1
XP 41
37
COLLECTINGMULCHING
1111-9610-01
1
XP 41 (←2006)
37
COLLECTING
1111-9611-01
1
XS 45 PETROL/ELECTRIC - XP 45 PETROL/
ELECTRIC
41
COLLECTINGMULCHING
1111-9612-01
1
XS 45 PETROL/ELECTRIC - XP 45 PETROL/
ELECTRIC
41
COLLECTING
1111-9613-01
1
XE-XSE 48
44
COLLECTING
1111-9614-01
1
XS 50 - XP 50
46
MULCHING
1111-9615-01
1
XP 50
46
COLLECTING
1111-9616-01
1
XA-XAP 52
48
COLLECTING
1111-9617-01
1
XA-XAP 52 - XSP 52 (2009) - New Garda 504
(←2008)
48
COLLECTINGMULCHING
1111-9620-01
1
XSM-XSIM 52
48
MULCHING
1111-9634-01
1
XSP - XSPW 52
48
COLLECTINGMULCHING
1111-9635-01
1
XSP 52 AVS VERSION - XSPW 52 AVS VERSION
48
COLLECTINGMULCHING
1111-9636-01
1
XSP 52 BBC VERSION - XSPW 52 BBC VERSION
48
COLLECTINGMULCHING
1111-9618-01
1
XS 55 - XA/XAP 55
51
COLLECTINGMULCHING
1111-9619-01
1
XS 55 - XA/XAP 55
51
COLLECTING
1111-9637-01
1
XSP-XSPW 57
53
COLLECTINGMULCHING
1111-9638-01
1
XSP 57 AVS VERSION - XSPW 57 AVS VERSION
53
COLLECTINGMULCHING
1111-9639-01
1
XSP 57 BBC VERSION - XSPW 57 BBC VERSION
53
COLLECTINGMULCHING
MACHINE
FITS FOR
BLADELENGTH (cm)
TYPE OF BLADE
85.
OFFICIAL GENUINE PARTS
Blade holder
Together with the blade, the blade holder is one of the main
safety components both for tractors and walk behinds. In event of
clashes with obstacles, it is fundamental that both the blade and
blade holder remain intact, to prevent sharp parts hitting the user
or people nearby. For this reason, Castelgarden Genuine blade
holders undergo destructive and exhaustive tests to maintain
complete safety.
CODE
QUANTITY
IN THE PACK
1134-9628-01
1
XF-XG-XJ-XL-XD-XDL-XT-XHT-XX-XHX
1134-9629-01
1
XE
1111-9623-01
1
XP 37 - XP 41 - XP 43
33
1111-9628-01
1
ELECTRIC PUSH/SELF PROPELLED VERSION: XS 45 XP 45 - XS 50
37
1111-9622-01
1
PETROL STEEL PUSH VERSION: XS 45-XS 50-XS 55-XSE
43-XSE 48-XAP 52-XSM 52
37
1111-9624-01
1
XP 45-XP 50
41
1
PETROL STEEL SELF PROPELLED VERSION: XS 50-XS
55-XSE 48-XA-XAP 52- XSP 52
41
1111-9625-01
86.
MACHINE
FITS
SPECIFICATIONS
20 MM
BLADE SUPPORT
1111-9626-01
1
XSP 57-XAP 55-XSM 52-XSIM 52
44
1111-9627-01
1
XSM 52 SILENT VERSION
46
1111-9621-01
1
XSDE 49 (DI474)
46
1
PETROL SELF PROPELLED VERSION (2008 ): XS 50-XS
55-XSE 48-XA-XAP 52-XSP 52 XSP 57-XAP 55-XSM 52-XSIM 52
48
Belts
All Castelgarden Genuine belts are developed following
measurements and tolerances which allow the belt to adapt itself
perfectly to the machine. Made to a specific length, different
for each machine, Castelgarden Genuine belts guarantee the
correct operation of all the parts, avoiding any possibility of
damage or breakage that could occur using non-original belts.
In particular, the toothed belt, exclusive to some Castelgarden
tractors, maintains the blades’ synchronization and assures an
outstanding collecting capacity.
CODE
QUANTITY
IN THE PACK
MACHINE
FITS
SPECIFICATIONS
1134-9600-01
1
XE (VD VERSION 2009)
VARIATOR
1134-9601-01
1
XD GEAR VERSION (2009); XD HYDRO VERSION (2010→)
CUT
1
XL GEAR-HYDRO VERSION (2002-2007); XD GEAR-HYDRO
VERSION (2009)
CUT
1134-9607-01
1134-9617-01
1
XJ GEAR-HYDRO VERSION (1997-2007)
CUT
1134-9618-01
1
XG (2007) GEAR-HYDRO VERSION
CUT
1134-9606-01
1
XF GEAR-HYDRO VERSION (2010)
CUT
1134-9632-01
1
XDL GEAR-HYDRO VERSION (2010)
CUT
1134-9613-01
1
XT GEAR-HYDRO VERSION (2001)
CUT-MANUAL
1134-9614-01
1
XX GEAR-HYDRO VERSION (2001)
CUT-MANUAL
1134-9608-01
1
XJ HYDRO VERSION (2001-2007); XL HYDRO VERSION (20022007)
TRANSMISSION
1134-9609-01
1
XJ GEAR VERSION (2007) - XL GEAR VERSION (←2007)
TRANSMISSION
1
XG HYDRO VERSION (2007) - XD HYDRO VERSION (20082009) - XT HYDRO VERSION
TRANSMISSION
1134-9610-01
1134-9612-01
1
(2001) - XX HYDRO VERSION (2001)
TRANSMISSION
1134-9603-01
1
XG GEAR VERSION (2007) - XD GEAR VERSION (2008-2009)
TRANSMISSION
1134-9605-01
1
XF GEAR VERSION (2000)
TRANSMISSION
1134-9631-01
1
XE (2009)
TRANSMISSION
1134-9602-01
1
XD-XDL (2010) HYDRO VERSION
TRANSMISSION
1134-9604-01
1
XD GEAR VERSION (2009) - XDL GEAR VERSION (2010)
TRANSMISSION
1134-9611-01
1
XF HYDRO VERSION (2006)
TRANSMISSION
1134-9619-01
1
XT GEAR VERSION (2001) - XX GEAR VERSION (2001-2005)
TRANSMISSION
1134-9620-01
1
XE VD VERSION (2009)
TRANSMISSION
1134-9615-01
1
XT GEAR-HYDRO VERSION (2001) - XHT (2009)
CUT (TOOTHED)
1134-9616-01
1
XX GEAR-HYDRO VERSION(2001) - XHX (2009)
CUT (TOOTHED)
1111-9629-01
1
XS 48
TRANSMISSION
1111-9600-01
1
XS 50
TRANSMISSION
TRANSMISSION
1111-9601-01
1
NEW GARDA 464-504
1111-9602-01
1
XS 55 - XSM 52 - XSM 52 SILENT VERSION - XSIM 52
TRANSMISSION
1111-9603-01
1
XP 50-XSE 55
TRANSMISSION
1111-9604-01
1
XA-XAP 52 - XA-XAP 55 - XSP 52 (2009) - XSP 52 BBC
VERSION (2009)
TRANSMISSION
1111-9605-01
1
XA 55
TRANSMISSION
1111-9606-01
1
XA 55 3 SPEED VERSION
TRANSMISSION
1111-9607-01
1
TURBO 55-TURBO 55 4 SPEED VERSION
TRANSMISSION
1111-9630-01
1
XSP 52 4 SPEED VERSION
TRANSMISSION
1111-9631-01
1
XSP 57
TRANSMISSION
1111-9632-01
1
XSP 57 4 SPEED VERSION
TRANSMISSION
1111-9633-01
1
XSP 52
TRANSMISSION
87.
Box 1006
SE-573 28 Tranås – SWEDEN
Tel. +46.(0)140-677 00
Fax +46.(0)140-677 01
Email: castelgarden@ggp-group.com
www.castelgarden.com
Castelgarden has a policy of continuous development and reserves the right to change models and specifications without prior notice.
88.
Code 171500251/1
Your local Castelgarden contact