LOW HEAD AND ULTRA-LOW HEAD HEXAGON SOCKET HEAD CAP SCREWS CBSS(Ultra-low head hexagon socket head cap screws) t L 725 Base unit price CBS CBSST 1 ~ 99 pcs. 100 ~ 300 1 ~ 99 pcs. 100 ~ 300 27 11 27 14 29 13 32 16 31 15 36 19 30 14 33 17 32 34 35 34 16 18 19 18 38 42 45 42 20 23 25 23 32 16 38 20 36 39 36 19 22 19 48 54 48 27 31 27 34 18 42 23 36 39 42 46 53 19 22 25 29 36 48 54 60 68 86 27 31 35 39 51 49 32 77 45 48 31 75 44 L E B Strength class ~ S45C(M3~8・M12) 22~32HRC Black oxide(Fe3O4) 8.8 SCM435 (M10) SUSXM7 A2-50 - - ℓ Catalog No. t M×P A E B max. CBS CBSST Type M-L CBS 3-6 CBSST 8 Full 10 Full 3×0.5 5.5 2 2 1.5 thread thread 12 16 12 20 CBS 4-6 CBSST 8 10 Full Full 4×0.7 7 2.8 2.5 2.3 thread thread 12 16 20 25 CBS 5-8 CBSST 10 12 Full Full 5×0.8 8.5 3.5 3 2.7 thread thread 16 20 25 16 24 30 CBS 6-8 CBSST 10 12 Full Full thread 16 thread 20 6×1.0 10 4 4 3 25 30 35 18 26 40 45 CBS 8-10 CBSST 12 16 Full thread Full 20 thread 25 8×1.25 13 5 5 3.8 30 35 40 22 30 45 50 CBS 10-16 CBSST 20 25 Full Full thread thread 30 10×1.5 16 6 6 4.5 35 40 45 32 36 50 CBS 12-20 CBSST 25 30 Full Full 12×1.75 18 7 8 5 thread thread 35 40 45 30 40 50 ~ Equivalent to S20C 48HRC Thin zinc coating ℓ1 ~ SCM435 32~39HRC Black oxide (Fe3O4) ℓ1 Catalog No. Base unit price t max. max. Type M-L 1~49 pcs. 50~300 CBSS 3-6 43 28 3×0.5 6 1.3 1.5 2 1.6 8 44 29 10 CBSS 4-6 38 23 4×0.7 8 1.5 2 2.5 1.6 8 39 24 40 25 10 CBSS 5-8 41 26 10 42 27 5×0.8 9 1.5 3 3 1.6 12 43 28 16 44 29 45 30 20 CBSS 6-8 44 29 10 46 31 12 47 32 6×1.0 10 1.5 3 4 2.0 16 49 34 20 51 36 52 37 25 CBSS 8-8 89 72 10 84 67 12 65 49 8×1.25 13 1.5 4 5 2.5 16 67 51 20 69 53 25 72 56 72 56 30 CBSS10-10 108 90 12 94 76 16 78 61 10×1.5 16 1.5 5 5 3.0 20 80 63 25 81 64 89 72 30 M×P A E B For larger orders, ask about prices/delivery. ※“Strength class”indicates the tensile strength of the threads. 50 33 54 37 57 39 64 46 69 51 62 44 66 48 71 53 74 56 79 60 83 64 88 69 91 72 94 75 85 66 89 70 108 88 110 90 115 95 138 116 78 87 95 110 120 105 113 126 132 144 153 165 171 177 158 165 210 218 225 270 46 52 56 66 73 63 68 76 80 88 93 101 108 109 96 101 130 134 139 168 Example: 8.8 A2-50 Indicates that the minimum tensile Indicates that the minimum yield 2 2 strength is 500N/mm{51kgf/mm point or proof strength is 80% of }. the tensile strength. S teel class A2 (Austenitic stainless steel) Indicates that the minimum tensile strength is 800N/mm2 2 . {81.6kgf/mm } Order Catalog No. CBS 4-10 CBSS5-12 Dispatch 2 of these products form a single pair for use. Strength class 10.9 Head strength class M3~M8 5.8 M10 4.8 7 Days Bolt ■Features Low head hexagon socket head cap screws ・C an be used without modification in locations where the heads of conventional hexagon socket head cap screws would cause an obstruction. ● Ultra-low head hexagon socket head cap screws ・Developed in order to reduce the space required for the height of the screw head. ・Unlike flat head screws, countersinking of the opposite material is not required. d 1.8 1.8 1.8 1.8 2.5 2.5 2.5 3.4 3.4 Base unit price Volume discount unit price No. 1 ~ 19 pairs 20 ~ 199 pairs 3 4 101 71 5 6 8 118 82 10 126 88 12 176 123 * 176 16 252 * 218 20 319 Prices marked with * apply to orders for 20~99 pairs. NLDP Dispatch NLDP 6 (chrome-free) Catalog No. Type t Catalog No. Order 7 Days Example Can be used without enlarging the size of the bolt head counterbore. ■Set sales Catalog No. Type Set price No. 3 4 5 6 8 10 12 16 20 NLDP-B Pairs/set Order Catalog No. NLDP-B6 Be sure that the quantity is correct when ordering. Example: An order for one NLDP-B6, will result in the delivery of 200 pairs. 5,040(25.2/pair) 168 pairs 6,720(33.6/pair) 8,400(42.0/pair) 15,120(75.6/pair) 15,120(151.2/pair) 84 pairs 17,640(176.4/pair) Dispatch 7 Days α>β α ■Principle of washers for loosening prevention Washers for loosening prevention have wedge-shaped cams on the inside and radial ribs on the outside. 2 of these washers form a single pair. The cam angle is set larger than the thread lead angle(β) . (α) When a force acts to loosen the bolt, the cams of one washer press the cams of the other washer up and away, however due to the wedge effect the washers do not separate by more than the thread pitch. β Correct ■Installing correctly 2 washers are delivered as a single pair, with adhesive already applied. Before reusing these washers, check that the raised parts have not been crushed and that there is no cracking. Then use in accordance with the correct installation method shown in the figure at right. Remove any other washers or similar items before using these products. ■Precautions for repeated use NLDP can be used repeatedly.At this time, be sure to use lubricating oil. ■Allowable temperature limit 25 20 NLDP 15 None Ordinary washer 10 ● 5 0 5 ■Concerning the clamped material Marks in the shape of the ribs on the outside of the washers will be left on the clamped material. Use only clamped material with a hardness that is no greater than the hardness of the washers for loosening prevention. Loosening prevention washer used: NLDP8 Bolt used: M8(strength class 12.9) Clamped material used: Equivalent to S20C(28HRC) [Table]: Recommended bolt tightening torques and bolt tightening force when loosening prevention washers are used 30 0 Incorrect When tightening a bolt and using washers for loosening prevention, refer to the recommended values in the table below. At values that are significantly less than the recommended values, the loosening prevention effects will not be achieved. At values higher than the recommended values, removing the bolts will be difficult and the loosening prevention washers may crack. Use caution. ■Graph of vibration test results (reference) Tester: Yanker type vibration tester Amplitude: ±0.5mm Frequency: 40 Hz Incorrect ■Recommended tightening torque and tightening force The maximum allowable temperature for NLDP is 200℃. Do not use these washers at temperatures above this limit. P.37 ■Volume discount price ●CBS ・CBSST Quantity 1~199 200~300 Applicable Base unit price Volume discount price Price list 5% For larger orders, ask about prices/delivery. D M3 7.0 3.4 M4 7.6 4.4 M5 9.0 5.4 M6 10.8 6.5 M8 13.5 8.7 M10 16.6 10.7 M12 19.5 13.0 M16 25.4 17.0 M20 30.7 21.4 2 of these products form a single pair for use. Tightening force kN CBS CBSST E ℓ t A A t B d M×P Type NLDP M×P D CBS (Low head hexagon socket head cap screw) CBSST(Stainless steel low head hexagon socket head cap screw) WASHERS FOR LOOSENING PREVENTION 15 10 20 25 Time sec. [Fig.] Results of vibration tests with and without NLDP washers NLDP Bolt M×P 3 4 5 6 8 10 12 16 20 3×0.5 4×0.7 5×0.8 6×1.0 8×1.3 10×1.5 12×1.8 16×2.0 20×2.5 Bolt strength class 12.9 Bolt strength class 10.9 Bolt strength class 8.8 µT=0.12 GF=0.75 µT=0.14 GF=0.71 µT=0.14 GF=0.71 Torque Tightening force Torque Tightening force Torque Tightening force kN Nm kN Nm kN Nm 2 3.9 4.6 6.7 9 10.9 15.7 15.4 37.6 28.1 74 44 127 65 310 120 607 188 µT: Thread coefficient of friction GF: Yield point ratio 1.7 3.8 7.5 13.1 31.3 62 106 258 506 3.2 5.6 9.1 12.9 23.4 37 54 100 156 1.3 3 5.9 10.3 24.8 49 84 203 398 2.4 4.2 6.8 9.7 17.6 28 40 75 118 726