BE SURE THE FOLD IS EXACTLY ON THE LINE
THIS FLAP FOLDS OVER THE EDGE OF THE DOOR
TEMPLATE
7104
2 3/ 4"
(70 mm)
BACKSET
11/2"
(38 mm)
1/ 8"
1" dia.
7104
BACKSET
1/ 8"
(4 mm)
Mark center of
door thickness
13/4"
(44 mm)
13/8" dia.
(35 mm)
13/8"
(35 mm)
21/4"
(57 mm)
(25 mm)
15/8"
(41 mm)
21/4"
(58 mm)
1"
(25 mm)
2 3/ 4"
(70 mm)
2 3/ 4"
(70 mm)
4" deep
(10 cm)
13/8"
(35 mm)
21/4"
(57 mm)
3 3/4"
(95 mm)
2 3/ 4"
(70 mm)
(4 mm)
13/4"
(44 mm)
1" dia.
(25 mm)
1 1/ 4"
(32 mm)
BACKSET
Mark center of
door thickness
dia.*
(6 mm)
CAUTION: Mark accurately, bore precision
For door with existing 2 1/ 8"
(54 mm) dia. hole align template
with this circle.
Latch cutout
1/4"
TEMPLATE
*IMPORTANT
Drill the four 1/ 4"
(6 mm) dia. holes
before all other holes.
Top
BE SURE THE FOLD IS EXACTLY ON THE LINE
NOTE: Lock will accomodate doors
13/8" (35 mm) to 21/4" (57 mm) thick.
Suitable reinforcement shall be provided
by the hollow metal door manufacturer
to prevent collapsing of door. When
door silencers are to be installed,
proper allowances must be made for
strike location.
3/4" dia.
(19 mm)
THIS FLAP FOLDS OVER THE EDGE OF THE DOOR
23/4"
(70 mm)
Kaba Access Control
www.kabaaccess.com
Tel: 800.849.8324
LEFT HAND DOOR
CAUTION
Apply template and drill
from the outside but
compensate for door
bevel if any
BACKSET RIGHT HAND DOOR
ALE
REFERENCE ONLY, NOT TO SC
MPLATE
DO NOT USE AS A DRILLING TE
CALL 800-849-8324
1/4"
dia.*
(6 mm)
11/2 "
(38 mm)
2"
(51 mm)
Bore
1" (25 mm) dia.
latch hole
11/2 "
(38 mm)
2"
(51 mm)
Insert latch, mark around
face plate of latch, mortise
to depth required.
4"
(100 mm)
Bottom
4"
(100 mm)
Bore
1" (25 mm) dia.
latch hole
PKG3371-E 0212
BE SURE THE FOLD IS EXACTLY ON THE LINE
THIS FLAP FOLDS OVER THE EDGE OF THE DOOR
TEMPLATE
7104
2 3/ 8"
(60 mm)
BACKSET
13/8"
(35 mm)
1" dia.
7104
BACKSET
2 3/ 8"
(60 mm)
2 3/ 8"
(60 mm)
11/2"
(38 mm)
Mark center of
door thickness
1/ 8"
21/4"
(57 mm)
13/4"
(44 mm)
13/8" dia.
(35 mm)
13/8"
(35 mm)
21/4"
(57 mm)
(25 mm)
15/8"
(41 mm)
21/4"
(58 mm)
1"
(25 mm)
2 3/ 8"
(60 mm)
TEMPLATE
4" deep
(10 cm)
3 3/4"
(95 mm)
(4 mm)
13/4"
(44 mm)
1" dia.
(25 mm)
1 1/ 4"
(32 mm)
BACKSET
Mark center of
door thickness
dia.*
(6 mm)
CAUTION: Mark accurately, bore precision
For door with existing 2 1/ 8"
(54 mm) dia. hole align template
with this circle.
Latch cutout
1/4"
BE SURE THE FOLD IS EXACTLY ON THE LINE
NOTE: Lock will accomodate doors
13/8" (35 mm) to 21/4" (57 mm) thick.
Suitable reinforcement shall be provided
by the hollow metal door manufacturer
to prevent collapsing of door. When
door silencers are to be installed,
proper allowances must be made for
strike location.
*IMPORTANT
Drill the four 1/ 4"
(6 mm) dia. holes
before all other holes.
Top
THIS FLAP FOLDS OVER THE EDGE OF THE DOOR
23/4"
(70 mm)
3/4" dia.
(19 mm)
LEFT HAND DOOR
CAUTION
Apply template and drill
from the outside but
compensate for door
bevel if any
BACKSET RIGHT HAND DOOR
Kaba Access Control
www.kabaaccess.com
Tel: 800.849.8324
1/4"
dia.*
(6 mm)
11/2 "
(38 mm)
2"
(51 mm)
Bore
1" (25 mm) dia.
latch hole
11/2 "
(38 mm)
Insert latch, mark
around face plate of
latch, mortise to depth
required.
3 5/ 8"
(103 mm)
Bottom
3 5/ 8"
(103 mm)
2"
(51 mm)
Bore
1" (25 mm) dia.
latch hole