Data sheet
ESBE Series 60 Electronic Motor Actuator
(Combined with ESBE 3&4-way rotary valves)
Features:
The ESBE 24 volt electronic series of motor
actuators are direct mounted actuators that
rotate ESBE 3 & 4-way mixing/diverting valves
for hydronic heating and cooling systems. The
Series 60 of compact motors are designed for
operating valves up to 2”. The fixed 90° rotation
provides consistent rotation of the actuator for
the hydronic application.
Features:
• ESBE control motor series are of a compact design.
• Direct mount actuators.
• Easy manual override of motor.
• Floating 3-point or proportional signal operation.
• An adjustable cam auxiliary contact switch.
• Wiring lead for ease of installation.
Ordering Information:
Replacement Parts:
60 Series Actuator: Used with ESBE rotary mixing valves up to 2”
Code No.
Series
Signal
Run Time
(90°@60Hz)
082F8972
62E
Floating 3 point
1.7 min.
082F8974
62EM
Floating 3 point,
with Aux. Switch
1.7 min.
082F8973
62P
0-10VDC , 2-10VDC
0-20mA or 4-20mA
60, 90 or 120 sec.
Replacement Parts for 60 Series
1. Plastic Driver
2. Mounting Screw
3. Locking Screw
4. Label
5. Plastic Cap
Code No.
Description
065B8929
Plastic drive sleeve
600-0000
Mounting kit for 60 Series
VDCPA122 © Danfoss 04/08
Item #
1
1-5
1
Data sheet
ESBE Series 60 Electronic Motor Actuator
(Combined with ESBE 3&4-way rotary valves)
Applications:
4-Way mixing valve application
3-Way mixing valve application
3-Way diverting valve application
3 & 4-Way Rotary Valves
3-Way Valve
4-Way Valve
Code No.
Reference
Connection
Cv*
Code No.
Reference
Connection
Cv*
065B8970
3MG 15-2.5
1/2” NPT
2.9
065B8981
4MG 15-2.5
1/2” NPT
2.9
065B8971
3MG 20-4
3/4” NPT
4.7
065B8982
4MG 20-4
3/4” NPT
4.7
065B8950
3MG 20-6.3
3/4” NPT
7.3
065B8983
4MG 20-6.3
3/4” NPT
7.3
065B8972
3MG 25-8
1” NPT
9.3
065B8984
4MG 25-8
1” NPT
9.3
065B8968
3MG 25-12
1” NPT
14
065B8985
4MG 25-12
1” NPT
14
065B8969
3MG 32-18
1-1/4” NPT
21
065B8986
4MG 32-18
1-1/4” NPT
21
065B8953
3 G 40
1-1/2” NPT
35
065B8967
4MG 20-2.5
3/4” Solder
2.9
065B8954
3 G 50
2” NPT
50
065B8990
4MG 25-6.3
1” Solder
7.3
065B8991
4MG 32-12
1-1/4” Solder
14
065B8979
4 G 40
1-1/2” NPT
35
065B8980
4 G 50
2” NPT
50
Cv value based on flow per a 1 psi pressure drop through
the valve
*
VDCPA122 © Danfoss 04/08
2
Data sheet
ESBE Series 60 Electronic Motor Actuator
(Combined with ESBE 3&4-way rotary valves)
Technical Specifications:
Supply Voltage
24VAC 50/60 Hz, (62P: 24VAC/DC 50/60 Hz)
Power Consumption
62E & 62EM 2VA (62P: 5VA)
Rotation (Factory set)
90°
Torque
45 in. lb (5 Nm)
Mountable Valve Size
1/2” to 2” ESBE rotary mixing valves
Enclosure
NEMA 1, IP 41
Ambient Temp. Range
5 to 131°F (-15 to 55°C)
Weight
1 lb (0.4 kg)
Signal / Run Time
3-point floating:
60 Hz
Auxiliary Switch
Mounting:
62E
1.7min.
62EM
1.7min.
Proportional: (selectable)
62PSignal:
0-10V, 2-10V,
0-20mA, 4-20mA
Run TIme:
60, 90 or 120 sec.
62EM: max. 2A, adjustable cam position
The actuator should be mounted with the ESBE
rotary valve stem in either a horizontal position
or pointing upwards. The actuator should not be
installed in a downward orientation to reduce
the possible contact of water with the actuator.
Included with the actuator is the mounting
hardware necessary to mount the electric motor
actuator to an ESBE rotary mixing valve.
1. Plastic Driver
2. Mounting Screw
3. Locking Screw
4. Label
5. Plastic Cap
Auxiliary Contact Cam:
Within the 62EM there is a settable cam that
determines when the auxiliary switch is
engaged. Beneath the cover of the actuator is
VDCPA122 © Danfoss 04/08
the settable cam for the auxiliary switch. Lift and
position the cam within the rotation path. The
maximum load for the auxiliary switch is 2amps.
3
Data sheet
ESBE Series 60 Electronic Motor Actuator
(Combined with ESBE 3&4-way rotary valves)
Manual Operation:
When placing the actuator in manual
operation power should be turned off to
the actuator. In the event the actuator is
powered and is left in a manual position,
the result could lead to the internal damage
of the actuator.
To place the 60 Series actuator in manual
operation, push in the large knob. With the
knob pushed in rotate it either clockwise
or counter clockwise. To return back to
automatic operation, rotate until the knob
pops out.
62EM Motor
Aux.
Switch
Blue
Blue
62E Motor
CCW
Brown CW
N
L
1
L
62P Motor, Signal Wire Signal
2
3
Black
Black
Black
COM
Brown
Blue
Black
Brown
62M
Black
Electrical Wiring:
4
5
62EM
Blue
COM
Black
CCW
Brown
CW
Black
AUX
Black
AUX
62P Motor, 2-Wire Signal
62P
VDCPA122 © Danfoss 08/08
Blue
COM
Black
SGNL
Brown
PWR
4
Data sheet
ESBE Series 60 Electronic Motor Actuator
(Combined with ESBE 3&4-way rotary valves)
62P Proportional
Actuator Settings:
Internal DIP Switches (Factory settings in bold)
Actuating time
1
2
Selection
OFF
OFF
60 sec
ON
OFF
90 sec
ON
120 sec
OFF
Rotation direction
3
Direction
OFF
Clock wise
ON
Counter clock wise
Control signal
4
5
Selection
OFF
OFF
0-10V
OFF
ON
2-10V
ON
OFF
0 20mA
ON
ON
4 20mA
1.65”
(42 mm)
1.75”
(44 mm)
Dimensions:
0.45”
(11 mm)
1.45”
(37 mm)
Technical
Specification:
0.8”
(20 mm)
2.6”
(65 mm)
The electronic motor actuator shall
be a compact design mountable on a
rotary valve. The actuator shall be 24Vac
powered with an ability for manual
VDCPA122 © Danfoss 08/08
3.25”
(82 mm)
override. It shall have a clear indication of
the actuator's position and be available
as either a floating point or proportional
style of actuator.
5
Data sheet
ESBE Series 60 Electronic Motor Actuator
(Combined with ESBE 3&4-way rotary valves)
Danfoss can accept no responsibility for possible errors in printed materials and reserves the right to alter its products without notice.
All trademarks in this material are property of the respective companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Danfoss Inc.
Danfoss Inc.
6711 Mississauga Road, Suite 410
Mississauga, ON, L5N 2W3
Tel.: 905-285-2050, Fax: 905-285-2055
www.na.heating.danfoss.com
Baltimore, MD
Tel.: 443-512-0266, Fax: 443-512-0270
www.na.heating.danfoss.com
VDCPA122 © Danfoss 04/08