International Publication in Mechanical Engineering Department 1- Dr.Ali Sadiq Yasir, The Cooling Rate Effect on the Buckling Strength and Elastic Properties of Heated Martensitic Stainless Steel Columns , International Journal of Engineering and Science(IJENS) -International Journal of mechanics and mechatronics Engineering (IJMME) Vol.12,No.3.2012 . IF=0.667 http://ijens.org/Vol_12_I_03/122203-4747-IJMME-IJENS.pdf. 2- Dr.Ali Sadiq Yasir , Study the Effect of Welding Joint Location on the Fatigue Strength and Fatigue Life for Steel Weldment, Asian Transaction on Engineering,Vol.2,Isuu 4,2012. http://www.asian-transactions.org/Journals/Vol02Issue04/ATE/ATE-80212044.pdf . 3- Dr.Ali Sadiq Yasir, Dr.Luay Sadik Al-ansari , Studying the Effect of Cooling Rate on the Linear, Non-Linear Deflection and Elastic Properties of Stainless Steel (grade 410) Beams, International Journal of Applied Science and Technology, Vol . 2 No. 8, 2012, http://www.ijastnet.com/journals/Vol_2_No_8_October_2012/4.pdf 4- Dr.Ali Sadiq Yasir , Comparative Investigation of the Dental Material Ablation Using Laser Radiation and Focusing Ione Beam Microscopy. Proceeding of summer school 2008(Electron and Ion Microscopy and Micromanipulation )2012. http://www.centrovolta.it/landau/ 5- Dr. Luay Sadik Al-ansari, Muhannad Al-Waily, Ali M. H. Yusif. Vibration Analysis of Hyper Composite Material Beam Utilizing Deformation and Rotary Inertia Effects. International Journal of Engineering and Science(IJENS) -International Journal of mechanics and mechatronics Engineering (IJMME) Vol.12,No.4.2012 , http://ijens.org/Vol_12_I_04/1216104-8383-IJMME-IJENS.pdf. 6- Dr.Luay Sadik Al-ansari , Calculating of Natural Frequency of Stepping Cantilever Beam., . International Journal of Engineering and Science(IJENS) -International Journal of mechanics and mechatronics Engineering (IJMME) Vol.12, No 5 ,2012. IF=0.667 http://ijens.org/Vol_12_I_05/1217204-05-3737-IJMME-IJENS.pdf 7- Dr.Luay Sadik Al-ansari , Calculating Stress Intensity Factor (Mode I) for Plate with Central Crack: Review and Comparison Between Several Techniques of Calculations, Asian Transaction on Engineering,Vol.2,Isuu 4,2012 . http://www.asian-transactions.org/Journals/ Vol. 2, Issue.5 /ATE/ATE-80202056.pdf. 8- Hafidh H.Mmohammed ,N.A.Madlool .Energy saving measuring for clinker production in cement industry .Advanced Materials Research .Vol.347-353. 2012. http://www.ttp.net/978-3-03785-265-1/58.html. 9- Aimen Rashad Noor, Annajaf City Naphtha as a Commercial Alternative Fuel for S.I. Engines in Iraq , International Journal of Engineering and Science(IJENS) -International Journal of mechanics and mechatronics Engineering (IJMME) Vol.12,No.4.2012, http://ijens.org/Vol_12_I_04/121004-4747-IJMME-IJENS.pdf 10- Muhannad Al-Waily, Prof. Dr. Muhsin J. Jweeg, Asst. Prof. Dr. Ali S. Hammood, Experimental and Numerical Study of Oblique Crack Effect on Natural Frequency of Different Composite Plate Structure Types, Asian Transactions on Engineering Volume 02. Issue 05. 2012, http://www.asian-transactions.org/Journals/Vol02Issue05/ATE/ATE-80203058.pdf. 11- Muhannad Al-Waily, Prof. Dr. Muhsin J. Jweeg, Asst. Prof. Dr. Ali S. Hammood, Analytical Solution to Oblique Crack Effect for Difference Composite Material Plates, ARPN Journal of Science and Technology Vol. 2, No 8, Sep 2012. http://www.ejournalofscience.org/archive/vol2no8/vol2no8_4.pdf 12- Muhannad Al-Waily, Prof. Dr. Muhsin J. Jweeg, Asst. Prof. Dr. Ali S. Hammood, Experimental and Theoretical Studies of Mechanical Properties for Reinforcement Fiber Types of Composite Materials, International Journal of Engineering and Science(IJENS) International Journal of mechanics and mechatronics Engineering (IJMME) Vol. 12, No. 4. 2012, IF=0.667 http://www.ijens.org/Vol_12_I_04/129304-5959-IJMME-IJENS.pdf 13- Muhannad Al-Waily, Prof. Dr. Muhsin J. Jweeg, Asst. Prof. Dr. Ali S. Hammood, A Suggested Analytical Solution of Isotropic Composite Plate with Crack Effect, International Journal of Engineering and Science (IJENS) -International Journal of mechanics and mechatronics Engineering (IJMME) Vol. 12, No. 5. 2012, IF=0.667 http://www.ijens.org/Vol_12_I_05/123605-9797-IJMME-IJENS.pdf 14- Muhannad Al-Waily, Prof. Dr. Muhsin J. Jweeg, Asst. Prof. Dr. Ali S. Hammood, A Suggested Analytical Solution of Orthotropic Composite Plate Structure with Crack Effect, International Academy of Science, Engineering and Technology (IASET)- International Journal of Mechanical Engineering (IJME) Vol.1, Issue 2 Nov 2012 41-66, IF=0.7283 19- Nasser A.Madlool. A critical review on energy use and savings in the cement industries. Science Direct /Renewable and Sustainable Energy Reviews Vol.15 (2011). http://www.sciencedirect.com/science/journal/13640321/15 20- Nasser A.Madlool . A energy analysis for cement industries An overview . Science Direct / Renewable and Sustainable Energy Reviews Vol.16(2011). http://www.sciencedirect.com/science/journal/13640321/16 21- Nasser A.Madlool . Assessment of energy efficiencies of grate clinker cooling system through the optimization of its operational parameters. Science Direct / Energy, Volume 46, Issue 1, October 2012, Pages 664-674. http://www.sciencedirect.com/science/article/pii/S0360544212005269 22- Nasser A.Madlool . Investigation of waste heat recovery in cement industry :A case study. International Journal of Engineering and Technology Vol.4. no.5(2012). http://www.ijetch.org/papers/457-Y2012.pdf 23-- Nasser A.Madlool. Energetic and Energetic Efficiencies of a Grate Cooler in Iraq Cement Industry . International Congress of Informatics ,environment , energy and application.IEEA,VOL.38.(2012) . http://www.ipcsit.com/vol38/031-IEEA2012-A20055.pdf