DESCRIPTION
With maximized performance in a uniquely minimal profile, the new JAYLUM Series
features crisp modern lines with and high efficient lens material to meet the most
stringent energy needs. The JAYLUM Series may be mounted individually or continuously with 4’ and 8’ modular sections and is suited for open offices, private offices,
conference rooms, reception areas, and educational facilities.
Type
Catalog #
Project
Date
Comments
Prepared by
SPECIFICATION FEATURES
A ... Construction
E ... Finish
Low profile housing and integral gear
tray constructed from die-formed 20
gauge cold rolled steel forming a 8-1/2” x
1-1/2” profile.
Fixture housings are high
reflectance white using
electrostatically applied polyester
powder coat paint.
B ... Reflectors
Reflector pan is painted with a high
reflectance white powder coat finish.
Optional die-formed side reflectors are
highly specular anodized aluminum.
G ... Electrical
For fixtures equipped with proprietary
Cooper LED technology, modules are
driven using universal voltage switchmode LED drivers with standard 0-10V
dimming. Cooper LED modules are availF ... Mounting
able in 3000K, 3500K, and 4000K with a
“Y” aircraft cable mounts on 4’-0” and
8’-0” centers. Refer to installation instruc- CRI greater than 85. Fixtures and electrical
tions for various ceiling interface details components certified to UL and CUL
standards.
C ... Lens
Lens is high light transmission 0.118”
thick clear microlinear prismatic acrylic
Optics Down0.08” thick Lamp Type
or a high light transmission
Series
Fluorescent
M = Micro
J2 = JAYLUM
frosted
acrylic material.
N5 = T5 Normal Output
Prismatic Lens
Suspended
D ... End PlatesL = Frosted Lens
Standard endcaps are rounded die
Opticsaluminum
Up
cast
and
atNumber
of mechanically
Lamps
W = White
= 1 Lamp
tached
flush1 to
end of fixture without
S = Specular
2 = 2 Lamps
exposed fasteners.
3 = 3 Lamps
C
D
1 = 1 Circuit
2 = 2 Circuits 1,2
1.
2.
3.
4.
5.
6.
7.
8.
9.
Suspension Length
Fixture Run Length
A = Aircraft Cable
48 = 48"
120 = 120"
240 = 240"
300 = 300"
360 = 360"
4 = 4ft
8 = 8ft
XX = Specify Length 4
T = Nightlight
E
Y = Daylight
Powerfeed
F
C = Straight Cord
K = Curly Cord
G
Voltage
Number of Circuits
Notes:
Suspension
B = Battery
C = Standard
D = Dimming
E = Emergency
T5 = T5 High Output
T8 = T8 Normal Output
AB
Wiring
XX = Specify
Length
120 = 120V
277 = 277V
Ceiling Type
UNV = Universal
(120V-277V) 3
T9 = 9/16" T-Bar
T1 = 1" T-Bar
TS = Slotted T-Bar
Option only availaible in fluorescent with 2 or more lamps.
347 = 347V
Maximum two ballasts per 4’ fixture.
This option accommodates 120/220/240/277V at 50/60Hz.
Continuously mounted standard row configurations over 8’ consist of 4’ and 8’ sections.
Sensor must be combined with 0-10V dimming ballast.
Sensor must be combined with DALI dimming ballast.
Percentages shown for reference only. Refer to photometric data for actual percentages up and down.
48” [1219mm]
Dust Cover limited to 2-Lamps in cross section.
43.5” [1066mm]
Ideal for True parallel-lamp dimming and/or use with low mercury and energy saving lamps.
1.55” [38mm]
ST = Structure
JB = 4" Octagonal
J-Box
8.5” [216mm]
8.5” [216mm]
JAYLUM
Suspended
Top Cover
Slide-N-Lock
Micro
Prismatic/
(%Up/%Down)
DL1 = (5/95)
Frosted
Lens
DL2 = (10/90)
Ballast Options
5LT = Fifthlight Ballast
GFLO30 = Green Fluorescent
Option - 3000K Lamps
GFLO35 = Green Fluorescent
Option - 3500K
GFLO41 = Green Fluorescent
Option - 4100K
5LTV = 0-10V Program Rapid Start Ballast
5LTVS = 0-10V Spec Grade
Program Rapid Start Ballast 9
24VDC = 24V DC Ballast
Blank = Standard Ballast
Integral Control Options
7
DL3 = (15/85)
DL4 = (20/80)
LED
DL5 = (25/75)
DL6 = (30/70)
DL7 = (35/65)
Suspended
DL8 = (40/60)
Direct/ Indirect
DC = Dust Cover 8
Blank = None
Finish
Blank = White
S = Silver
CC = Custom Color
DS = Day-Sense Integral Sensor 5
2S = 2Sense Integral Sensor 6
Blank = None
3.75” [95mm]
96” [2438mm]
ORDERING INFORMATION
Sample Number: J2-WL-2L35-1C-UNV-AC48-T1-4-DLED
Optics Down
Series
J2 = JAYLUM
Suspended
M = Micro
Prismatic Lens
L = Frosted Lens
Optics Up
W = White
Color Temperature
30 = LED 3000K
35 = LED 3500K
40 = LED 4000K
T = Nightlight
Y = Daylight
Light Level
1L =Light Level 1 (30W/2999Lumen)1
2L = Light Level 2 (39W/3858Lumen) 1
3L = Light Level 3 (50W/4731Lumen) 1
Suspension
Suspension Length
Fixture Run Length
A = Aircraft Cable
48 = 48"
120 = 120"
240 = 240"
300 = 300"
360 = 360"
4 = 4ft
8 = 8ft
XX = Specify Length 4
Powerfeed
C = Straight Cord
K = Curly Cord
XX = Specify
Length
Voltage
Number of Circuits
1 = 1 Circuit
Notes:
Wiring
C = Standard
D = Dimming
E = Emergency
120 = 120V
277 = 277V
Ceiling Type
UNV = Universal
(120V-277V) 3
T9 = 9/16" T-Bar
1. Lumen values vary depending on color temperature and lens option.
Refer to photometric data for specific lumen values.
2. Dust Cover cannot be combined with DLED kit.
3. This option accommodates 120/220/240/277V at 50/60Hz.
4. Continuously mounted standard row configurations over 8’ consist of 4’ and 8’ sections.
5. Lutron Driver not available in Light Level 3. Default wiring is for digital controls. Consult your representative for alternate wiring options.
6. Sensor must be combined with 0-10V dimming ballast.
7. Sensor must be combined with DALI dimming ballast.
T1 = 1" T-Bar
TS = Slotted T-Bar
ST = Structure
Consult your representative for additional options and finishes.
5LT = Fifthlight Driver
LUT = Lutron Driver 5
DC = Dust Cover 2
DLED = LED
Downlight Kit 2
Blank = None
Finish
Blank = White
S = Silver
CC = Custom Color
Blank = Standard 0-10V Driver
Integral Control Options
DS = Day-Sense Integral Sensor 6
2S = 2Sense Integral Sensor 7
Blank = None
JB = 4" Octagonal
J-Box
Specification and Dimensions subject to change without notice.
www.cooperlighting.com
Driver Options
Top Cover
ADE130897
07/15/2013