INSTALLATION INSTRUCTIONS
Product
Revision
7160-0390-04, -05, -06, -10, -11, -12
Rev.A
PANASONIC TOUGHBOOK CF-31 MAG DOCKING STATION, w/GPS
Form
INST-552
Printing Spec: PS-001
This instruction sheet is a supplement to INST-509 & INST-398 for the following products:
Panasonic Toughbook CF-31 docking station with no integrated high gain antenna pass-thru cables.
Item No. 7160-0390-04 (Button lock, No RF, Int. power)
Item No. 7160-0390-10 (Auto lock, No RF, Int. power)
Panasonic Toughbook CF-31 docking station with single integrated high gain antenna pass-thru cable.
Item No. 7160-0390-05 (Button lock, Single RF, Int. power)
Item No. 7160-0390-11 (Auto lock, Single RF, Int. power)
Panasonic Toughbook CF-31 docking station with
dual integrated high gain antenna pass-thru cable.
Item No. 7160-0390-06 (Button lock, Dual RF, Int. power)
Item No. 7160-0390-12 (Auto lock, Dual RF, Int. power)
REFERENCE INST-509 & INST-398 FOR COMPLETE INSTALLATION AND USE INSTRUCTIONS
INSTALLATION
The GPS module is powered via the CF-31 Mag Docking Station power cable. Follow INST-398 for
the dock wiring considerations.
The GPS antenna is located under the gray plastic cover on top of the Mag Dock. The dock should be
installed so that the gray cover has a clear view of they sky through the windshild.
The hardware bag contians a harness that allows for four inputs and three outputs (I/O Harness) The
ouputs should be connected using standard automotive relays.
Figure 1 - I/O Harness
Wire Color
Blue Wire
Orange Wire
Violet Wire
Grey Wire
Green Wire
Brown Wire
Yellow Wire
Signal/Description
Input 1 ‐ Visible on Screen
Input 2
Input 3
Input 4
Output 1 ‐ Starter Disable Relay
Output 2 ‐ Honk Horn
Output 3 ‐ Unlock Doors
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2011 Gamber-Johnson, LLC
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
SETUP AND TESTING
To activate your account contact Tag Global Systems at 1-800-630-4708. (Service actications can
only be processed by the wireless carriers bewteen 9 am and 5 pm Central time, Monday thru Friday.
Actication orders typically take 1 hour to process through the GSM wireless network partners.)
The dock serial number (located on the white label on the bottom of the dock) is the serial number
required for actication. For future reference you can record your serial number and VIN or license
number here.
VIN/License:__________________________________ Serial #_______________________
Once your account is activated make sure the unit is getting good GSM/GPS signals. Use the hole in
the side of the dock housing to view the troubleshooting LEDs on the GPS unit.
Figure 2
Troubleshooting
Port
Figure3 - Troubleshooting LEDs
Once the system has been fully tested and is functional. Plug Troublshooting Port hole with plug
supplied in hardware bag.