PARTS CATALOGUE
PMC Authorized Dealer in England
R
Z1 4-4 Exhaust System
Chrome exhaust mufflers.
Connecting pipes and clamps are included.
Parts No.
86-260
Z1 (72-75), Z900 (76)
R
Exhaust Mounting Flange Set
Flanges for mounting
exhaust (2 of LH and
2 RH) and mouting
hardware included.
6mm
Parts No.
86-164
Z1 (72-75), Z900 (76)
8mm
Parts No.
86-168
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R
Exhaust Mounting Stud Set
R
Replacement Baffle for 4-4 Exhaust
Exhaust Gasket Set
R
Fits Kawasaki Z1 4-4 exhaust only.
STD Type
Racing type
Size M
Size S
Copper gasckets. 4pcs set.
Size S
Parts No.
Size M
Stainless studs including stainless nuts.
6mm
Parts No.
81-3241
Z1 (72-75), Z900 (76)
Size S/ 19mm (1pc)
81-3242
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Size M/ 30mm (1pc)
Parts No.
8mm
Parts No.
Parts No.
R
Exhaust Mounting Damper
Cushion damper for 4-4
exhaust. Sold by 1pc.
Parts No.
86-169
86-262
Parts No.
86-163
86-261
G
for Center Stand
81-5472 : for Side Stand
Parts No.
81-5471
Z1 (72-75), Z900 (76)
1pc
# 92075-015
for Side Stand
Parts No.
81-5472
81-5471 : for Center Stand Z1 (72-75), Z900 (76)
#92075-157
R
Z1R-1 STD Tail Pipe Assy
Chrome tail pipe. Contains mounting
stay, rubber center stand stopper and
clamp.
R = Reproduction parts
G = Genuine parts
86-511
Exhaust Mounting Bolt & Nut Set R
Racing/ 35mm (4pcs)
Center & Side Stand Rubber Damper
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Parts No.
34-18067
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Z1R-1 (D1 / 78)
Chrome bolts with flanges and
U-locks. A set of 2 screws and 2 nuts.
Parts No.
Z1R-2 STD Tail Pipe Assy
Chrome 2 tail pipes. Contains mounting stay, rubber
center stand stopper and clamp.
Parts No. 86-512 Z1R-2 (D3 / 79-80)
- 01 -
86-170
Z1 (72-75), Z900 (76)
R
R
Z1 Fuel Tank
Steel fuel tank. Inner capacity is 18 liters.
Emblem, Fuel tap and cap of genuine and PMC original products
can be used to this tank.
R
Z1 Fuel Cap
Parts No.
73-180 Z1 (72-75)
Chrome fuel cap made of aluminum
die-casting.
Parts No. 81-1040 Z1 (72-75)
R
Mk-2 Fuel Tank
R
Mk-2 Fuel Cap
Chrome fuel cap with 2 keys.
Fuel cap mounting kit (No.81-1044)
is useful for installation.
Parts No.
81-1042
Z1000Mk-2 (A3-A4 / 79-80)
Z1000J / R (81-83)
Z1100R / GP (81-84)
Steel fuel tank. Inner capacity is same as genuine tank. Emblem,
Fuel tap and cap of genuine and PMC original products can be used to this tank.
Parts No.
73-321
81-1044
Z1000Mk-2 (A3-A4 / 79-80)
Fuel Tank Mounting Rubber Band
R
73-187
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Fuel Tank Mounting Cushion Rubber
R
Fuel Cap Seal
R
Z900 / 1000 Fuel Cap
Rubber seal for fuel cap.
Rubber stopper for mounting fuel tank.
Parts No.
Fuel Cap Mounting Kit
Parts No.
R
Parts No.
81-1220
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Parts No.
81-1221
Z1000Mk-2 (A3-A4 / 79-80)
Fuel Tank Mounting Rubber
Chrome aluminum fuel cap.
Contains 1 spring pin and 2 keys.
R
Parts No.
86-1045
Z900 (76), Z1000 (A1-A2 / 77-78)
Fuel Tank Mounting Spacer
Contains 2 each of 2.3mm and 1.0mm spacers.
Parts No.
73-181 2pcs
Parts No.
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
R = Reproduction parts
G = Genuine parts
73-182 2pcs
Parts No.
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
- 02 -
73-184
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
R
R
Chrome Fuel Tap
R
Z1 Early Model Fuel Tap
Aluminum fuel tap.
Parts No.
81-2300
Z1 (72-75), Z900 (76)
Z1000 (A1 / 77)
Z1R (D1-D3 / 78-80)
Z1100GP (B1-B2 / 81-82)
GPZ1100 (A1-A3 / 83-85)
R
Z1 Late Model Fuel Tap
G
Z1000 / 1100 Fuel Tap
Fuel tap for use with
22mm mounting nuts.
Parts No.
#51023-1372. Mounting
hardware included.
Bolt pitch 44mm and total
height 80mm.
81-2306
Z1 (72-75), Z900 (76)
Z1000 (A1 / 77)
Z1R (D1-D3 / 78-80)
Z1100GP (B1-B2 / 81-82)
GPZ1100 (A1-A3 / 83-85)
Parts No.
81-2303
Z1000A / J / R (78-83)
Z1100R (84)
O/H Kit
For use with 22mm mounting nuts.
Parts No.
81-2304 Black
Parts No.
81-2305 Unichrome
Z1 (72-75), Z900 (76), Z1000 (A1 / 77)
Z1R (D1-D3 / 78-80)
Z1100GP (B1-B2 / 81-82)
GPZ1100 (A1-A3 / 83-85)
Fuel Hose / Clip
O/H Kit
Sold by the 50cm unit.
Fuel Hose for 6-8mm
Parts No.
#11009-1044, #16126-1038,
#43058-1001 and #92022-183.
O ring included.
Parts No.
81-2150
Parts No.
Clips for 12-13mm
81-2151
Parts No.
R
ABS Tail Cowl & Side Cover
72-444
2pcs set.
72-442
Side Cover Grommet Set R
ABS tail cowl and side cover.
for Z1 (72-75)
Parts No.
for Z1 (72-75)
Parts No.
81-1012
Parts No.
81-1010 RH
Parts No.
81-1011 LH
81-1250
6pcs set.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Tail Cowl Mounting Grommet Set R
for Z900 (76)
Z1000 (A1-A2 / 77-78)
Mounting hardware included.
for Z1000 (A1-A2 / 77-78)
Parts No.
81-1022
Parts No.
81-1020 RH
Parts No.
81-1021 LH
Parts No.
81-1251
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
for Z1000Mk-2 (A3-A4 / 79-80)
Parts No.
69-201
R = Reproduction parts
for Z1000Mk-2 (A3-A4 / 79-80)
Parts No.
G = Genuine parts
69-202
RH
- 03 -
Parts No.
69-203 LH
81-1252
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R
FRP Cowl Series
R
Z1R Inner Panel
FRP front cowl, tail cowl and side cover. Excellent in durability and intensity.
ABS front cowl
inner panel.
Parts No.
69-221
Z1R (D1-D3 / 78-80)
Meter Mounting Rubber
Parts No.
Z1R (D1-D3 / 78-80)
Z1000J / R, Z1100R / GP (81-84)
Side Cover (RH)
Front Cowl
Parts No.
73-140
Side Cover (LH)
Parts No.
73-341
Parts No.
Parts No.
73-342
Parts No.
73-050
Parts No.
Side Cover (RH)
73-343
Parts No.
R
MK-2 Side Reflector
73-060
73-080
Parts No.
Parts No.
R
Parts No.
69-225 RH (1pc)
Parts No.
69-226 LH (1pc)
73-090
Tail Cowl
73-070
Z1R Seat Lock Cover
ABS end cap.
Z1R (D1-D3 / 78-80)
Seat Rail (LH)
Side Cover (LH)
Parts No.
Z1R End Cap for Front Cowl R
Seat Rail (RH)
Front Cowl
Tail Cowl
69-223
73-100
R
Mirror Series
Z1 Early Model
The Early model is a thin type mirror.
Including long and short stay. Fit either
left or right side. Diameter is 10mm.
Parts No. 152-121
Square type side reflectors.
Chrome aluminum seat lock cover.
Stainless spring included.
Parts No. 73-111 Z1R (D1-D3 / 78-80)
Z1000Mk-2 (A3-A4 / 79-80)
(1pc)
Parts No.
81-1260 Red
Parts No.
81-1261 Orange (1pc)
R
Tail Tray
152-121: Z1 Early Model
R
Panel Sticker
152-101 :
Universal Model Black
Aluminum coated panel sticker of
wiring diagram.
English
Rubber grip included.
Parts No.
Parts No.
81-1015
81-1013/1
Z1 (72-75)
Japanese
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Parts No.
81-1014/1
Early Model (left) & Universal Model (right).
Z2 (72-75)
R
Smoke Screen Series
These screens are hard to be damaged by special surface processing.
Excellent in durability.
152-102 :
Universal Model Chrome
Universal Model
General purpose mirror. Diameter is 10mm.
Including long and short stay. Fit either left or right side.
Parts No.
152-101 Black
Parts No.
R
Transfer Film for Graphics
A transfer film like genuine product which can be removed after use.
Model
Z1A
Z1B
Z750D1
Z1000A3-A4
Z1000H1
Z1000A3-A4
Z1R-1 (D1)
Z1R-2 (D3)
Z1000R2
GPZ1100-A1
Z1R Racing Type
Parts No. 81-1141 Z1R (D1-D3 / 78-80)
Z1300A1
Z1R STD Type
Parts No. 81-1140 Z1R (D1-D3 / 78-80)
GPZ750R-G2
GPZ900R-A2
Z400FX
Z400GP
(STD)
81-1295 : Z1000Mk-2 (STD)
Parts No.
81-1150
Parts No.
R = Reproduction parts
81-1151
G = Genuine parts
- 04 -
Color
Parts No.
Yellow
Orange
Blue
Maroon
Black
Blue/ Red
Black
Black
Silver/ Blue
Black
Blue/ White
Red
Blue
Lime Green
Lime Green
Silver/ Black
Red/ Black
81-1278
81-1279
81-1280
81-1281
81-1294
81-1295
81-1276
81-1346
81-1277
81-1293
81-1288
81-1283
81-1347
81-1285
81-1286
81-1345
81-1284
R
Custom Paint Sticker Set
Model
81-1277 :
Z1R (Silver / Blue)
GPZ1100 (A1-A3 / 83-85)
Pattern
1974
1974
1975
1975
Gold Line
A3-STD
Z1000 H
US Model
Pin Stripe
Pin Stripe
Lime Green
Early Model
US Model
Normal
Normal
E4 Type
Normal
Sticker type like current model.
81-1280 :
Z1B (Blue)
Z1000R (R1-R2 / 82-83), Z1100GP (B2 / 82)
Z1100R (R1 / 84)
152-102 Chrome
Z1000R1
GPZ750 / 1100
GPZ400
ZRX400
Zephyr 400
Color
Lawson Color
Rainey Model
Rainey Model
Lawson Color
1975 Z1B Type
Set Items
Parts No.
3 x 1m-Line
10pcs
10pcs
3 x 1m-Line
6pcs
81-1287
81-1289
81-1290
81-1291
81-1292
R
Z1 Grab Rail
R
Grab Handle Kit
74-0060 : Full Set
Sold by a set or separately.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78) , Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Side grip
Parts No. 81-1030
Spacing collar
Parts No. 74-0061
Full set
Mounting nut
Parts No. 74-0062
Parts No.
R
Z1 Helmet Holder
74-0060
Universal Helmet Holder
Stainless helmet holder
excellent in intensity
and rust-prevention.
Z1 (72-75)
Unpainted
Parts No.
Chrome steel grab rail.
Parts No.
81-1110
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
R
Center Stand
Black painted steel center stand. Mounting hardware
are sold separately.
Z1 (72-75), Z900 (76)
Mounting Bolt (2pcs)
Parts No. 81-5462
A spare key included.
81-1211
R
Side Stand
81-5230
Parts No.
Center Stand Spring
Parts No. 81-5463
Parts No.
81-4029
Side Stand Spring Set
R
Fits genuine side stand and also PMC side
stand.
Fitting hardware included.
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Center Stand
Parts No. 81-5464
81-1210
Black
Parts No.
81-5231
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78),
Z1000Mk-2 (A3-A4 / 79-80) , Z1R (D1-D3 / 78-80)
R
Urethane Seat Form Series
Made of Urethane foam. Optimal for restoration or making an original seat.
Z1000 (A1-A2 / 77-78)
Parts No.
Z1R (D1-D3 / 78-80)
83-112
Parts No.
KZ900 / 1000 LTD
83-114
Parts No.
83-113
R
Seat Leather Series
Made of high quality synthetic leather. Excellent in durability and weatherability.
Parts No.
83-108
Z1 (72-75)
Parts No. 83-102 Z1000 (A1-A2 / 77-78)
Parts No. 83-104 Z1R-1 (D1 / 78)
Parts No.
Parts No.
83-101
Z900 (76)
Parts No. 83-105 Z1R-2 (D3 / 79-80)
Parts No. 83-107 Z1000R (R1-R2 / 82-83)
Parts No. 83-103 KZ900 / 1000 LTD
R = Reproduction parts
G = Genuine parts
- 05 -
83-106
Z1000Mk-2 (A3-A4 / 79-80)
R
Completed Seat
R
Seat Hinge
Made of high quality synthetic leather. Excellent in durability and weatherability. Seat hinge and latch included.
Z1 Early Type
Z1 Tackroll Type
Sold by 1pc. Mounting hardware included.
Parts No.
81-1057
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
R
Seat Catch
Parts No. 151-1150
Z2 Model (with Belt)
Parts No. 151-1170
Z2 Model (with Belt)
Parts No. 151-1050
Z1 Model (without Belt)
Parts No. 151-1070
Z1 Model (without Belt)
Z1 Lowing Type
Z1 S1 Type
Including mounting hardware for fitting to
genuine seat.Z1 seat can be used to Z900
and Z1000 with this seat catch.
Parts No.
81-5344
Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
Parts No. 151-1165
Z2 Model (with Belt)
Parts No. 151-1160
Z2 Model (with Belt)
Parts No. 151-1065
Z1 Model (without Belt)
Parts No. 151-1060
Z1 Model (without Belt)
Mk-2 STD Type
81-5345
Z1000Mk-2 (A3-A4 / 79-80)
R
Seat Stopper
Mk-2 Lowing Type
Stainless stopper with retaining spring
and snap pin.
Seat belt equipped
Seat belt equipped
Parts No. 151-1201 Z1000Mk-2 (A3-A4 / 79-80)
Parts No. 151-1205 Z1000Mk-2 (A3-A4 / 79-80)
R
Seat Belt
Universal type and Z2 type seat belts. Please put on the “NO-ASSY” by adjusting the length of the belt.
The belt of the “ASSY” is the length same as a belt of Z1 STD sheet.
Universal Type
Parts No.
81-1052
Parts No.
81-1055 Z1 (72-75)
Parts No.
81-1056 Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
R
Seat Pin
2 stainless mounting pin with snap pin.
Z2 Type
Parts No.
81-1051
Parts No. 151-1012
Parts No. 151-1011
81-5339
81-1053
Z1 (72-75), Z900 (76)
Parts No.
81-1054
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
R
Seat Lock
Contains seat catch, lever and rubber grip.
Black painted steel seat lock.
Parts No.
Parts No.
Z1 (72-75)
R
Seat Catch Lever Grip
Rubber grip only for seat catch lever.
Parts No.
Z1 (72-75)
R = Reproduction parts
G = Genuine parts
- 06 -
81-5338
Stem Emblem Series
Stem Emblem Mounting Stay Set
R
●
Decorations Type
The combination of letters such as "DOHC" or "Kawasaki"
is possible by processing.
Parts No.
Parts No.
69-212
69-211
Chrome
Black
Z1 Tank Emblem
Parts No.
47-2289
●
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
KAWASAKI Type
Parts No.
47-2282 Chrome
Parts No.
47-2283 Black
G #44033-1054
R
Early 900 Model Emblem
R
750 Emblem
Mounting screws included.
122mm G #56014-1013
Parts No. 81-1224
Z1 (72-73)
Fits on either left or right side. Sold by 1pc.
Speed Nut Type
Parts No.
81-1230
Z1 (72-75)
Double Sided Tape Type
Parts No.
81-1223
G
#56014-1038. Mounting pitch is 122mm.
Parts No.
Z2 (72-75)
Universal
Mk-2 Tank Emblem
81-1228 122mm
Z1000Mk-2 (A3-A4 / 79-80), Z1R-2 (D3 / 79-80)
Fits on either left or right side. Sold by 1pc.
Speed Nut Type
Double Sided Tape Type
Parts No. 81-1233
Parts No. 81-1232
Parts No.
81-1231
Z1 (74-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R (D1 / 78)
Universal
R
1100 Emblem
Late 900 Model Emblem
G
KZ1000 Emblem
81-1234
Parts No.
81-1240
R
Contains 2 speed nuts. Fits on either left
or right side. Sold by 1pc.
#56018-197. Fits on either left or right side.
Sold by 1pc. Speed nuts included.
Fits on either left or right side. Double
sided tape type. Sold by 1pc.
Parts No.
140mm
Z1 (72-75)
Parts No.
81-1219
Z1000 (A1-A2 / 77-78)
Universal
Mk-2 US Model Side Cover Emblem R
R
Z900 Side Cover Emblem
Contains 2 speed nuts.
Mounting pitch is
74mm. Fits on either
left or right side.
Sold by 1pc.
Parts No.
Contains 2 speed nuts. Mounting pitch is
98mm. Fits on either left or right side.
Sold by 1pc.
Parts No.
81-1225
FX Side Cover Emblem
Emblem Mounting Screw Set
Z900 (76)
R
Z1R Side Cover Emblem
Fits on either left or
right side.
Sold by 1pc.
81-1242
Screws and nuts to fix emblem.
Z750FX-1
Parts No.
81-1214 R
Screws for Tank Emblem
Parts No. 81-1239 4pcs
Nuts for Side Cover
Parts No. 81-1227 6pcs
Z1000Mk-2 (A3-A4 / 79-80)
Parts No.
81-1245
Z400FX/750FX-1
Z1R-1 (D1 / 78)
Parts No.
R
Z1000R1 Side Cover Emblem
Contains 2 speed nuts. Mounting pitch is 100mm. Fits on either left or
right side. Sold by 1pc.
Z1000R Tank Emblem G
#56014-1043. Mounting pitch is
140mm. Fits on either left or right
side. Sold by 1pc.
Parts No.
81-1247
Z1000R (R1 / 82)
R = Reproduction parts
Parts No.
81-1248
Z1000R (R2 / 83)
G = Genuine parts
R
Fits on either left or right side.
Fixed by double-sided tape.
Sold by 1pc.
Parts No.
81-1229
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84) , GP (B1-B2 / 81-82)
- 07 -
81-1241 G
#56018-1097
Z1000R Tail Emblem
G
#56018-1208. Fixed by double
sided tape.
Size:W122mm × H25mm
Parts No.
81-1243
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84) , GP (B1-B2 / 81-82)
Z1000R Champion Sticker R
Sticker of "Superbike Champion"
for Z1000R1.
Parts No.
81-1226
Z1000R (R1 / 82)
Z1 Chrome
Front Fender
R
Chrome steel front fender.
For users who prefer
standard form.
81-1381
Parts No.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
R
ABS Inner Fender
R
Chrome Rear Fender
Chrome steel rear fender.
Parts No. 81-1382
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
MK-2 Chrome Front Fender
G
MK-2 Rear Fender
R
ABS inner fender excellent in resistance against vibration.
Parts No. 81-1184
Parts No. 81-1185
Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1 (72-75)
R
Caution Label Set
Equipped with damper rubber to improve resistance
against vibration.Contains all bolts and collars
required for mounting meters.
Chrome steel front fender.
Parts No.
81-1364 #35001-1009
Z1000Mk-2 (A3-A4 / 79-80)
Set of 4 caution labels for tail cowl and
2 labels for helmet hook.
for Z1 (English)
ABS rear fender.
Parts No.
69-204
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Rear Fender Mounting Grommet
R
Parts No.
47-2009
Z1 (72-75)
R
Z1 Rear Fender Mounting Stay
Set of 7 caution labels and 2 labels for
helmet hook.
for Z2 (Japanese)
Parts No.
47-2010
R
Z1 Rear Fender Mounting Rubber
Rubber damper for
easing vibration and
shock of rear fender.
Made of stainless.
Parts No.
Z2 (72-75)
81-1369
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Parts No.
81-1366
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
R
License Plate Damper Rubber
Rubber grommets for mounting rear and inner fender.
Parts No.
81-1256
Parts No.
81-1259
Parts No.
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z1 (72-75)
Tail Lamp Base Mounting Damper Set
81-4212
Parts No.
G = Genuine parts
81-1255
G
Z1 Tail Lamp Mounting Damper
#92075-076 and mounting hardware.
3pcs set.
81-4215
Parts No.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1 (72-75)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
R = Reproduction parts
73-021
G
#92075-135. 2pcs set.
Parts No.
Parts No.
Use for only japanese
license plates.
Z1 (72-75)
Rear Fender Cushion Rubber
#35039-004. Mounting hardware included.
R
License Plate Holder
Rubber damper for
reducing resonant
sound of license plate.
- 08 -
81-4216
G
Tail Base Mounting Damper
G
#92075-112 and mouting hardware.
3pcs set.
Parts No.
81-4217
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R
Meter Series
Speedometers
220km and 240km
indicator . Cutting is
required for fitting into
genuine bracket.
220km indicator
Red zone indication
in 80km or more
Speed censor not equipped.
240km indicator
114-012 220km
Tachometer
Parts No.
Parts No.
Full scale indication
without red zone
114-013 240km
Cutting is required for
fitting into genuine
bracket.
Early model
Without stop lamp.
Late model
With stop lamp
Parts No.
R
Z1 Meter Bracket
114-133 Early model
Parts No.
R
Meter Mounting Damper
114-132
R Late model
R
Tachometer Port
Contains rubber dampers,
collars, washers and nuts.
Parts No.
81-2298
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Meter & Indicator Cover Mounting Screws
R
M3 screws with washers.
Parts No.
Equipped with damper rubber to improve resistance
against vibration.Contains all bolts and collars
required for mounting meters.
Parts No.
81-2299
81-4015
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1 (72-75)
R
Z900/1000 Meter Bracket
Tachometer Port
Closecover Cap
R
Unichrome steel port housing. 2 aluminum
lock plates and stainless bracket stay included.
Minimizes the damage to a cylinder head by
its divided structure, even if a meter gear
seizes.
Parts No.
81-2235
Z1 (72-75) , Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80) , Z1R (D1-D3 / 78-80)
G
Tachometer Gear
#13223-011.
O rings included.
Parts No.
Parts No.
81-2290
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R
Cable Clamp Set
81-2231
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
km/h Sticker
Decal for changing mile
indication to kilometer
indication.
Parts No.
47-2011
Sponge damper included.
Parts No.
81-2297
2pcs set.
Z900 (76), Z1000 (A1-A2 / 77-78), Z1000Mk-2 (A3-A4 / 79-80)
Parts No.
81-2029
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2(A3 / 79)
R
Meter Cable
R
Meter Cover
Lower cover
High performance meter cables excellent
in smooth movement and durability .
Shell type meter cover. 2pcs set.
Parts No.
81-1130 Chrome
Parts No.
81-1131 Black
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Tachometer Cable
Parts No.
81-2020 64.5cm
Parts No.
81-2021 69.5cm
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Speedometer Cable
84.5cm / Speedometer Gear M11
Parts No. 81-2030 Z1 (72-75)
Upper cover
92.5cm / Speedometer Gear M11
Parts No. 81-2031 Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2(A3 / 79), Z1R-1 (D1 / 78)
Chrome upper cover. 2pcs set.
93.5cm / Speedometer Gear M12
Parts No. 81-2032 Z1000Mk-2 (A4 / 80), Z1R-2 (D3 / 79-80), Z1000J / R (81-83), Z1100R / GP (81-84)
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
R = Reproduction parts
G = Genuine parts
Parts No.
- 09 -
81-1121
Parts No.
Z400 / 550FX
81-1122
R
Z1 Indicator Cover
Z900 / 1000 Indicator Cover
R
Pilot lamps form a line lengthwise.
From top to bottom;
● NEUTRAL ● HIGH-BEAM
● OIL ● STOP-LAMP
(In 3 lamps type not included)
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
3 lamps type
Parts No.
R
Z1 Indicator Harness
81-4010 : Early Model
81-4016
4 lamps type
81-4017 : 4 Lamps Type
Parts No.
81-4017
Z900 / 1000 Indicator Harness R
81-4011 : Late Model
Early model (neutral lamp is positioned at the left end) and
late model (turn signal lamp is positioned at the left end).
Early model
Parts No. 81-4010 Z1 (72-73)
Late model
Parts No. 81-4011 Z1 (74-75)
R
Main Switch & Lock Set
Z1 (72-75)
Contains Ignition
switch, Seat lock,
Handle lock
Parts No.
Fits either early model or late model.
Parts No. 81-4033 Z1 (72-75)
Unavailable for speed warning light.
Parts No. 81-4043
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
81-4020
Speed Warning Light
R
Contains mounting nuts and wirings.
Parts No.
69-2013
Z2 (72-75)
Speed Warning
Light Sticker
for Z1 (72-75)
Parts No.
Z1000 (A1-A2 / 77-78)
The ignition switch
is 6P coupler type.
Parts No.
47-2014
Z2 (72-75)
R
Ignition Switch Series
Contains ignition switch and a spare key.
81-4023
Z900 (76)
The ignition switch
is 4P coupler type.
Parts No.
for Z900 (76)
and Z1000 (A1-A2 / 77-78)
81-4025
Contains ignition switch, seat lock and handle lock.
81-4067 Z1000 (A1-A2 / 77-78)
81-4074 Z1R-1 (D1 / 78)
Parts No. 81-4068 Z1000Mk-2 (A3-A4 / 79-80)
Z1000Mk-2 (A3-A4 / 79-80)
Contains ignition switch, seat lock,
handle lock and helmet lock.
Parts No.
Z1000J (J3 / 83), R (R2 / 83), Z1100GP (B2 / 82)
Z1100R (R1 / 84), GPZ1100 (A1-A3 / 83-85) (US Model)
Wire Clamp Set
81-4021
Parts No.
81-4072
Parts No.
Parts No.
R
Chrome stainless wire clamp. 2pcs set.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Chrome
Parts No. 81-2026
for Z1000Mk-2 (A3-A4 / 79-80)
R
Throttle Wire
R
Clutch Wire
Clutch Cable Clamp
Parts No.
Stainless throttle wire with teflon inner
tube. Frictional resistance is reduced.
Stainless clutch wire with teflon inner
tube.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Parts No.
81-2080
100cm / STD Handle
Parts No.
81-2090
120cm / STD Handle
Parts No.
81-2081
90cm / Lower Handle
Parts No.
81-2091
111cm / Lower Handle
81-2084
110cm / Upper Handle
Parts No.
81-2092
130cm / Upper Handle
Parts No.
R = Reproduction parts
G = Genuine parts
- 10 -
Stainless
Parts No. 81-2028
81-2027 STD
Parts No. 156-2025
Nylon coated
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R
R
Dimmer Switch
R
Z1 Early Model Dimmer Switch
LH (Winker)
RH (S.motor)
Aluminum handle switch with only necessary function.
LH (Winker)
RH (S.motor)
Parts No.
Passing function and position lamp can be worked by these switches. Switch of hazard lamp
is not equipped.
Models
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z750FX-1 (79-80)
Z1000Mk-2 (A3-A4 / 79-80) (EC)
LH (winker) RH (S. motor)
Parts No.
Parts No.
81-4301
81-4310
81-4305
81-4306
81-4300
81-4302
81-4303
81-4303
LH (Winker)
RH (Starter Motor)
LH (winker) RH (S. motor)
Models
Z1000Mk-2 (A3-A4 / 79-80) (Always On)
Z1R-1 (D1 / 78)
Z1R-2 (D3 / 79-80) (EC)
Z1R-2 (D3 / 79-80) (Always On)
Parts No.
Parts No.
81-4306
81-4307
81-4307
81-4307
81-4304
81-4302
81-4303
81-4304
69-111
Z1 (72-75), Z900 (76)
Parts No.
R
Z1 Throttle Lock
Bolt & Spring
Z1 (72-75), Z900 (76)
R
STD Handle Grip
High weatherproof rubber
grip. 2pcs set.
Parts No. 81-5091
Z1 (72-75)
Cancel relay (no. 71-0012) is required for installation of LH switch (No. 81-4307) on Z1R-1.
STD Throttle Inner Pipe
69-112
R
81-5091 : for Z1 (72-75)
Duralumin-based aluminum inner pipe.
Total length 130mm.
Parts No. 72-482
81-5095 :
for Z900, Z1000
Z1000Mk-2
Stainless bolt and spring set.
Parts No.
81-3174
Z1 (72-75)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Parts No.
81-5095
Z900 (76)
Z1000 (A1-A2 / 77-78)
R
Tapered Roller Bearing for Stem Head
Z1000Mk-2 (A3-A4 / 79-80)
R
Z1 STD Handle
Upper and lower bearings. 2pcs set.
Parts No. 81-5161
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Parts No.
81-5162
Chrome steel handlebar.
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84), GP (B1-B2 / 81-82)
GPZ1100 (A1-A3 / 83-85)
Parts No.
81-5100
Z1 (72-75), Z900 (76) , Z1000 (A1-A2 / 77-78), Z1000Mk-2 (A3-A4 / 79-80)
Chrome Stem Mounting Bolt
Chrome steel mounting hardwares.
Available for:
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Steering Head Mounting Nut & Washer
G #92090-007 and steering cap.
Parts No.
81-5393
Top Bridge Mounting Hexagon Bolt Set
3R
fork3and
stemclamping
clampingbolts
chrome
screws
set.
chrome
for fork
and stem.
3 spring
washers
included.
3 spring
washers
included.
Parts No.
Stem Head Mounting Bolt & Washer
Handle Stem Lock Bolts
R #92007-031. Contains main bolt, washer
R 4 clamping screws and 4 spring washers set.
and thrust washer for fixing.
Parts No.
Parts No.
81-5392
81-5396
Handle Stem Lock Bolts
R 2 chrome clamping bolts for fork.
2 mounting spring washers included.
Parts No.
R = Reproduction parts
G = Genuine parts
- 11 -
81-5394
81-5395
R
Z1 Front Step Assy
R
Z1 Rear Step Assy
Front Step & Rubber
The rigid step which was attached to Z2
Left & Right Step Bar Set R
Parts No.
Chrome pipe and mounting holder. 2pcs set.
Sold by a set of one each of right and left.
Parts No.
81-5110
81-5116 Z2 (72-75)
Z1 (72-75), Z900 (76) , Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Parts No.
R
Front Step Mounting Stud Set
81-5111
Z1 (72-75), Z900 (76)
R
Front Step Mounting Nuts & Washers
Left & Right Step Rubber Set
G #92076-005
Parts No.
81-5117 Z2 (72-75)
Front Step Cushion Rubber
R
4 cap nuts and washers.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Stainless front step studs including lock washers. 4pcs set.
Parts No.
Parts No.
81-5112 Z1 (72-75), Z900 (76) , Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Parts No.
81-5113 Stainless
Parts No. 156-5113 Chrome
R
Engine Mounting Hexagon Bolt Set
81-5114 4pcs
Z1 (72-75), Z900 (76) , Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R
Engine Mounting Steel Plates
81-5403 : for Z1 (72-75)
A set of black steel engine mounting plate.
Unichrome steel hexagon bolt set including mounting collars, nuts and washers.
Parts No.
Parts No.
81-2415 Z1 (72-75), Z900 (76) , Z1000 (A1-A2 / 77-78)
Z1 (72-75)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R
Engine Mounting Stainless Bolt Set
81-5403
Parts No.
81-5404
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
81-5404 : for Z1000Mk-2 , Z1R
R
Engine Mounting Stainless Plates
A set of stainless bolt.
Excellent in intensity
and durability
Parts No. 81-2015
A set of stainless
plates.
Excellent in intensity
and durability.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Parts No. 81-5401
Z1 (72-75)
R
Engine Mounting Nuts
Its special shape has an
effect as the stopper not
to make corotation.
Parts No.
81-2007
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R = Reproduction parts
G = Genuine parts
- 12 -
Parts No. 81-5402
Z1000Mk-2 (A3-A4 / 79-80) , Z1R (D1-D3 / 78-80)
■ Z1 Wire Harness
R
■ Wire Harness Series
R
81-4250 : for Z750FX-1
Improved harness against electric leakage.
Early exchange is recommended before causing the trouble of the electrical component.
Z1 (72-75)
Parts No. 81-4030 Full Set
Models
Single article
Parts No. 81-4031 Main Harness
Parts No.
Parts No. 81-4032 Center Harness
81-4033 Indicator Harness Parts No. 81-4034 Tail Lamp Harness
■ Z1 Fuse & Holder
Fuse of 20A included.
■ STD Fuse Box
2 spare fuses are included.
R
R
69-4232 : for Z1000Mk-2, Z1R-1
81-4230
Universal
Parts No.
69-4233
Z900 (76)
Z1000 (A1-A4 / 77-78)
Z1R-1 (D1 / 78)
Parts No.
69-4232
Z1000Mk-2
(A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
Tube Type
Fuse & Holder
81-4255
81-4252
81-4256
81-4250
81-4251
81-4257
Indicator
Harness
Parts No.
Plate Type
Fuse & Holder
Parts No.
Parts No.
Z900 (76)
Z1000 (A1-A2 / 77-78) “US Model”
Z1R-1 (D1 / 78) “US Model”
Z750FX-1 (79-80)
Z1000Mk-2 (A3-A4 / 79-80)
Z1000R (R1 / 82)
81-4043
Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2
(A3-A4 / 79-80)
■ Harness Band Set
G
#92072-030, #92072-031
and #92072-032.
Total 13pcs set.
Parts No. 81-4231
Z1 (72-75)
Parts No.
■ High Performance Horn
R
■ Z1 Harness Bracket Mounting Bolt
Universal model and Z1 early model.
R
A set of stainless
shoulder screw
including 2 washers
of 14mm and
2 washers of 15.5mm.
Univeral Model
Parts No.
81-4091
Chrome
Parts No.
81-4049
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
81-4091 Chrome
Parts No.
81-4090
Black
81-4090 Black
■ IC Regulator for MF Battery
R
81-1371
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1R-1 (D1 / 78)
81-4092 : Z1 Early Model
Parts No.
■ Z1 Center Harness Bracket
R
81-4092
■ High Performance IC Regulator
R
Stainless harness bracket with barrel polishing.
Excellent in durability and intensity.
Parts No. 81-4028
Z1 (72-75), Z900 (76), Z1000 (A1- A2 / 77-78), Z1R-1 (D1 / 78)
■ Ignition Stabilizer
71-0170 : for Z1 (72-75)
81-4080 : for Z1 (72-75)
High performance IC regulator fitting MF and open
type battery. Installed with coupler.
Models
High performance IC regulator with rectifier.
Models
Parts No.
Parts No.
Z1 (72-75)
71-0170
Z1 (72-75)
81-4080
Z900 (76)
71-0171
Z900 (76)
81-4081
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
71-0172
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
81-4082
Z1000Mk-2 (A3-A4 / 79-80), Z1R-2 (D3 / 79-80)
71-0173
Z1000Mk-2 (A3-A4 / 79-80), Z1R-2 (D3 / 79-80)
81-4083
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
71-0174
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
81-4084
Relay to take the power supply of the ignition out of battery
directly, and to stabilize an electric current and the voltage.
Parts No.
R = Reproduction parts
G = Genuine parts
- 13 -
Universal
71-0010
■ Z1 Steel Battery Case Series
R
Electric Plate
Parts No. 81-5433
Tool Case
Parts No. 81-5432
Battery case, tool case, electric plate and cleaner
holder coated with black powder. Excellent in
durability and weatherability.
Z1 (72-75)
Battery Case
Parts No. 81-5431
Cleaner Holder
Parts No. 81-5434
■ Battery Case Mounting Rubber Damper
R
■ Battery Fixing Band
■ Battery Tray
G
R
Contains cushion rubbers, mounting
rubbers, steel sleeves, screws and washers.
Parts No.
Parts No.
81-1253
Z1 (72-75)
81-1258
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
#92072-045
Parts No.
R
■ Electric Plate
Mounting Rubber
81-1257
Parts No.
Z1 (72-75)
■ Battery Stopper
A set of rubber, grommet
and sleeve for fitting
fusebox on battery case.
Parts No. 81-1254
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1R (D1 / 78)
■ YUASA Open Type Battery
■ YUASA MF Battery
69-131
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R ■ Battery Case Mounting Stay R
Steel battery stopper
for easing vibration
of battery.
Parts No.
81-5336
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Connects engine mounting bracket.
Parts No. 81-5337
Z1R-2 (D3 / 79-80)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
■ Battery Lead Wire
R
High performance battery code.
Electrolyte included.
Parts No.
81-9010
Z900 (76), GS400, GSX400 etc.
Parts No.
81-9011
Z400FX, CB400F, CB400N, CBX400 etc
Parts No.
81-9012
Z1 (72-75), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Parts No.
81-9013
Parts No.
81-9014
Z1100GP (B1-B2 / 81-82)
GPZ1100 (A1-A3 / 83-85)
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84)
R = Reproduction parts
G = Genuine parts
Electrolyte included. Excellent in long-lasting and
high output. Use only with regulator for MF battery.
Z1 (72-75) , Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Parts No.
106-021
Size: W133,D90,H167mm
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84), GP (B1-B1 / 81-82) , GPZ1100 (A1-A3 / 83-85)
Parts No.
106-013
Size: W177,D88,H156mm
- 14 -
Parts No.
81-4240 Z1 (72-75)
Parts No.
81-4241 Z900 (76), Z1000A / D (77-80)
Parts No.
81-4242 Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
■ Battery Quick Charger
R
Rating 12V/1.2A.
Parts No.
81-9021
■ NGK Plug Cord Set
■ Plug Cord Number Plate
Number plates from 1 to 4.
Fit 6mm-8mm plug cords.
Parts No.
81-4370
■ Plug Cord Joint
Contains 4 high tension Taylor wires and 4 NGK plug caps.
Parts No.
■ Ignition Coil
81-4270
■ Plug Cord Clamp set
G
Available for connecting ignition coil
with plug cord. Fit also high tension
wires of Taylor or DYNATEK.
Parts No.
71-0301
■ NGK Spark Plug
#92037-1539. Black steel clamp. 4pcs set.
Parts No.
81-4372
■ NGK Iridium Plug
BR8EIX
Parts No.
The primary resistor is 3Ω.
Mounting pitch is 90mm.
Parts No.
Parts No.
71-0361
81-4360
Sold by a set of 10pcs.
DR8EIX
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1R-1 (D1 / 78)
■ Point Assy
81-4362
BR9EIX
Parts No.
81-4263
R
Parts No.
81-4261
More powerful than a general spark plug. 4pcs set.
■ Advancer Mounting Bolt
D7EA
B7ES
Parts No.
DR9EIX
81-4320
Parts No.
Parts No.
81-4330
D8EA
B8ES
81-4321
Parts No.
81-4331
■ Advancer
G
R
Delivered by the assembly or separately.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
Assembly
Parts No. 81-2391
RH Contact Point
Parts No.
81-2392
Contains unichrome S45C carbon steel screw and
17mm hexagon collar for fitting.
Parts No.
LH Contact Point
Parts No.
81-2393
■ One Way Clutch O/H Kit
Condenser
Parts No.
G
81-2394
81-2421
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
■ One Way Clutch Hub Assy G
#92022-244. Advancer to adjust ignition
timing.
Parts No.
81-2395
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
■ One Way Clutch Starting Gear G
■ One Way Clutch Gear
#21167-002 and #13002-007.
Mounting pin included.
Parts No. 72-484
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
Parts No.
Parts No.
72-081
#92122-001, #92043-087 and #92081-110
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
R = Reproduction parts
G = Genuine parts
#13193-1006. 3 mounting screws
included.
Parts No. 72-485
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
- 15 -
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Parts No.
72-055
G
#21167-003
72-056 #16085-1012
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80), Z1000J / R (81-83)
Z1100R / GP / GPZ (81-85)
■ Brightec Headlight System
■ Chrome Headlight Rim
Black
Chrome
A set of headlight rim, black or chrome light case and 55/66W H4 bulb.
Headlight rim contains an inner retainer.
Head Light Case
Z1, Z900, Z1000, Mk-2, J
8mm Nut Case (Universal)
Black
Chrome
71-0050
71-0060
71-0051
71-0061
R
■ Headlight Rim with Retainer
R
Chrome rim with inner retainer.
Chrome steel rim. Fit standard
light case of Z series.
Parts No. 81-4110/1
Parts No.
81-4110
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), J (J1-J3 / 81-83)
■ Speed Warning R
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Z1000J (J1-J3 / 81-83)
Light Sticker
Parts No.
■ Headlight Rim & Case
47-2014
Z2 (72-75)
R
■ Z1 Headlight G
Case Hole Cover
#92074-006.
Rubber grommet cover
for headlight case.
Parts No.
47-2015
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Black head light case
■ Fork Cover Ring
Chrome head light case
R
Steel headlight case including chrome rim with inner retainer. Mouting hardware included.
Head Light Case
Z1, Z900, Z1000, Mk-2, J
8mm Nut Case (Universal)
Black
Chrome
81-4130
81-4131
81-4120
81-4121
■ Z1 Headlight Case Bracket Set
R
Z1/Z900 model
8mm model
■ Z1 Fork Cover Guide
R
Stainless upper guide ring to fix headlight stay.
Z1 (72-75), Z900 (76) , Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Parts No. 81-5321
Parts No. 156-5321
Stainless
Chrome NEW
■ Fork Cover Lower Damper Rubber
A set of Bracket to fix and adjust vertical position of
headlight. Rubber grommet included.
Stem cover fitted under the headlight stay.
Fits either left or right side. Sold by 1pc.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
71-0059 Full Set
Parts No.
71-0058 Bracket Mounting Damper Only
Parts No.
■ Z1 Light Stay Early Model
R
R
81-5320
Z1 (72-75)
■ Z1 Light Stay Late Model
R
Rubber damper which is attached into guide cover.
Parts No.
81-5322
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
■ Lower Washer for Headlight Stay
Early model chrome light stay.
Late model chrome light stay.
Z1 (72-75) , Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1 (72-75) , Z900 (76)
Z1000 (A1-A2 / 77-78)
Parts No.
81-5260 RH
Parts No.
81-5265 RH
Parts No.
81-5261 LH
Parts No.
81-5266 LH
■ Z1R Headlight Stay
R
Stainless lower washers to hold the lower damper.
Parts No. 81-5323
■ MK-2 Light Stay
R
Aluminum headlight
stay.
Black painted light
stay.
Z1R (D1-D3 / 78-80)
Z1000Mk-2
(A3-A4 / 79-80)
RH
Parts No.
Parts No.
LH
Parts No.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
■ MK-2 Headlight Mounting Bolt Set
Chrome bolts to
fix headlight .
Contains washers
and nuts.
Bolt size:
M10-PC1.25
L35mm.
RH
73-130
81-5263
LH
73-131
Parts No.
81-5264
Parts No.
R = Reproduction parts
G = Genuine parts
- 16 -
R
147-501 Z1000Mk-2 (A3-A4 / 79-80)
R
■ Z1 Type Turn Signal / Orange Lens
R
■ Z1 Type Turn Signal / Clear Lens
R
■ Z1R Type Turn Signal
R
Z1 type orange lens turn signal with chrome aluminum
body. Sold by 1pc.
Z1 type clear lens turn signal with orange bulb.
Sold by 1pc.
Z1R type turn signal with plastic body and metal stay.
Sold by 1pc.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1R (D1-D3 / 78-80)
81-4140 Front / Rear
Parts No. 81-4140/1 Lens Only
Parts No.
81-4160 Front
Parts No.
81-4161 Rear
Parts No.
81-4141 Front / Rear
Parts No. 81-4141/1
Parts No.
Lens Only
■ Mk-2 Type Turn Signal / Orange Lens
R
■ Mk-2 Type Turn Signal / Clear Lens
Mk-2 type orange lens turn signal with chrome
aluminum body. Sold by 1pc.
Mk-2 Clear lens turn signal with orange bulb.
Sold by 1pc.
Z1000Mk-2 (A3-A4 / 79-80)
Z1000Mk-2 (A3-A4 / 79-80)
Parts No.
81-4150 Front Parts No. 81-4151 Rear
Parts No.
R
81-4152 Front Parts No. 81-4153 Rear
R
Z1000R type turn signal with plastic body and stay.
Sold by 1pc.
Parts No. 81-4200 Front
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84), GP (B1-B2 / 81-82)
Parts No.
Parts No. 81-4152/1 Lens Only
Parts No. 81-4150/1 Lens Only
■ Z1000R Type Turn Signal
81-4201 Rear
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84), GP (B1-B2 / 81-82), GPZ1100 (83-85)
■ KH250 / 400 Type Turn Signal
R
Orange lens model and clear lens model
with orange bulb. Sold by 1pc.
Parts No.
Parts No.
■ GPZ Type Front Turn Signal
GPZ type front turn signal with plastic
body and stay. Sold by 1pc.
Parts No.
81-4181 Clear
GPZ1100 (A1-A3 / 83-85)
R
Universal turn signal relay. Rubber mounting holder included.
Parts No.
81-4381 with Operating Sound
81-4382 without Operating Sound
R = Reproduction parts
81-4281 Clear
Clear / Short
Parts No. 81-4283
Orange / Long
Parts No. 81-4284
Clear / Long
Parts No. 81-4285
Universal type turn signal. Orange
lens model and clear lens model.
2pcs set.
Universal type turn signal. Orange
lens model and clear lens model.
2pcs set.
Parts No. 219-5041 Orange
Parts No. 219-5024 Orange
Parts No. 219-5014 Orange
Parts No. 219-5080 Clear
Parts No. 219-5023 Clear
Parts No. 219-5013 Clear
R
■ Mk-2 Type Turn Signal Stay
Chrome aluminum turn signal stay.
Sold by 1pc.
81-4171
Parts No.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
G = Genuine parts
Short or long stay included. Sold by 1pc.
Orange / Short
Parts No. 81-4282
Universal type turn signal. Orange
lens model and clear lens model.
2pcs set.
Chrome aluminum turn signal stay.
Sold by 1pc.
Parts No.
81-4280 Orange
Parts No.
R
■European Type 50mm Turn Signal R
Chrome aluminum turn signal stay.
Sold by 1pc.
81-4170
Parts No.
■ GS400 Type Turn Signal
■European Type 45mm Turn Signal R
■ Z1 Type Turn Signal Stay
Parts No.
R
■ CB72 Type 48mm Turn Signal R
■ Z1 Type Turn Signal Stay / Short R
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
■ CB400F / 750K Type Turn Signal
CB400F/750K type turn signal.
Sold by 1pc.
81-4220 Front
81-4180 Orange
■ High Performance IC Turn Signal Relay
Parts No.
R
- 17 -
81-4172
Z1000Mk-2 (A3-A4 / 79-80)
R
■ Mk-2 Type Turn Signal Stay / Short R
Total length 83mm stem length 37mm.
Sold by 2pcs.
Parts No. 217-1001
Z1000Mk-2 (A3-A4 / 79-80)
■ Z1 Type LED Lamp
R
LED lamp for Z series. Superior to standard bulbs in energy reduction and brightness etc.
■ LED Turn Signal
■ Completed
System
LED Tail Lamp
Total 42 LEDs are built in. If
stop lamp is installed in meter
or indicator, stop lamp adapter
(No.81-4293) is required.
Total 24 LEDs are built
in. 4pcs set with turn
signal relay.
Z1 (72-75)
Z1 (72-75)
81-4289 Red
Parts No. 81-4292 Clear
Parts No. 81-4288 Smoke
81-4146 Orange
81-4144 Clear
Parts No. 81-4147 Smoke
Parts No.
Parts No.
Parts No.
■ Universal Tail Lamp Z1 type
R
■ MK-2 Tail Lamp
R
■ Grounding Cord for Turn Signal R
Inner diameter of terminals is 10mm.
2pcs set.
Parts No.
81-4211
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Red lens model and clear lens model. The included bracket is
universal type.
Red lens model and clear lens model.
Z1 (72-75)
Z1000Mk-2 (A3-A4 / 79-80)
Red Assy
Parts No.
Clear Assy
81-4290
Parts No.
Parts No.
Parts No.
Clear Lens Only
Parts No. 81-4291/1
Red Lens Only
Parts No. 81-4290/1
Bracket Only
Red Assy
81-4291
■ Double Socket for Turn Signal R
Socket to convert
single socket into
double socket.
2pcs set.
Clear Assy
81-4397
Parts No.
81-4398
Clear Lens Only
Parts No. 81-4398/1
Red Lens Only
Parts No. 81-4397/1
Required for fitting assemblies
Parts No.
81-4511 to STD rear fender.
■ Z1R Tail Lamp
R
81-4219 Universal
■ Turn Signal Bushing
R
81-4210 : Full Set
81-4207 : Light Case Mounting Damper
81-4207
Parts No.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Red lens model and clear lens model.
Z900 (76), Z1000 (A1-A2 / 77-78), Z1R (D1-D3 / 78-80)
Red Assy
Parts No. 81-4387
Clear Assy
Parts No. 81-4388
Red Lens Only
Clear Lens Only
Sold by a set or separately.
Parts No. 81-4210 Full set
Parts No. 81-4387/1
Parts No. 81-4388/1
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
■ 88mm Turn Signal Stay R
■ 56mm Turn Signal Stay
Full length 88mm, stem length
26mm and bolt size 10mm.
Full length 56mm, stem length 26mm.
4pcs set.
Parts No. 217-1010
2pcs
Universal
Parts No. 217-1008
R
Diameter 10mm
Parts No. 217-1016 Diameter 8mm
Universal
G = Genuine parts
Parts No.
M10 - PC1.25. Stem length 30mm, Ounter diameter
36mm. Sold by 1pc.
Short (full length 88mm)
Parts No.
81-4174
- 18 -
81-4208
81-4209 : Mounting Damper Rubber
Parts No.
81-4209
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78) , Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
■ Z1 Type Flat Mounting Turn Signal Stay
Universal
R = Reproduction parts
81-4208 : Bush & Collar
Long (full length 125mm)
Parts No.
81-4175
Universal
R
■ H2 Type Turn Signal Stay Bracket R
36mm black steel turn signal mounting
bracket. Clamp screw diameter is 12mm.
Rubber damper included.
Parts No.
147-502 2pcs
Z1000Mk-2 (A3-A4 / 79-80), H2 (750SS)
R
Z1 STD Front Fork
STD front fork with aluminum bottom
case and clear coated inner tube. The fork
spring is equivalent to genuine products.
Yellow reflector included.
Parts No.
81-5376
Z1 (72-75)
R
Inner Tube
Hard chrome inner tube.
●
Sold by 1pc
Parts No. 157-5030
Z1 (72-75), Z900 (76), Z1000 (A1 / 77)
Parts No. 157-5032
Z1000 (A2 / 78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (78-80)
●
Z1 Front Fork Piston Ring R
R
Z1 Relief Valve
Sold by a set of 2pcs
Parts No. 81-5029
Z1000J (J1 / 81)
Parts No. 81-5024
Z1000J (J2 / 82), R (R1 / 82)
Parts No. 81-5025
Z1000J (J3 / 83), R (R2 / 83)
Z1100R (R1 / 84)
R
Front Fork Spring
Contains collar, bulb, spring and clip.
Important parts producing damping
force in the up and down stroke of the
front fork. Sold by a set for a inner tube.
Fork spring kit of progressive structure.
Available for street use, winding and
circuit.
Piston rings for
front fork.
Fit genuine inner
tube and also after
market. 2pcs set.
Parts No.
Z1R (D1-D3 / 78-80)
Parts No.
Parts No.
Z1 (72-75), Z900 (76), Z1000 (A1 / 77)
Z1 (72-75), Z900 (76), Z1000 (A1 / 77)
R
73-0081
Z1000J (J1-J3 / 81-83), R (R1- R2 / 82-83)
Z1100GP (B1-B2 / 81-82), R (R1 / 84)
81-5481
Parts No. 157-5021
36mm Fork Seal Stopper
73-0080
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
GPZ1100 (A1-A3 / 83-85)
R
Front Fork Seal
Front Fork Dust Seal
R
Contains 2 washers
and 2 C-shaped
clips.
Parts No.
81-5219
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
R
Z1 Front Fork Top Cap
High-performance oil seal available to prevent oil leak.
Sold by a set of 2pcs.
Parts No. 81-5210 36mm
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80), W3, H2 etc.
Parts No.
81-5212
Oil seales protecting dust boots against dirt and dust.
Sold by a set of 2pcs.
Parts No. 81-5230 Z1 (72-75), W3, H2
Parts No.
38mm
81-5221
Z1000J (J1-J3 / 81-83) , R (R1-R2 / 82-83) , Z1100GP (B1-B2 / 81-82), R (R1 / 84)
Parts No.
81-5211
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
37mm
GPZ1100 (A1-A3 / 83-85), GPZ750F etc.
R
Z1 Side Reflector
Reflector
Yellow
Sold by 2pcs set. O ring included.
Parts No.
81-5380
Z1 (72-75), Z900 (76), Z1000 (A1 / 77)
R = Reproduction parts
G = Genuine parts
Red
You can choose total
8 combinations with reflector
and trim. Sold by 1pc.
- 19 -
Clear
Chrome
Trim
Parts No.
Black
Chrome
Black
Chrome
Black
Chrome
Black
Chrome
81-1191
81-1194
81-1192
81-1195
81-1193
81-1196
81-1197
81-1198
Z1 Aluminum Reflector Cover
Aluminum reflector cap. 2pcs set.
Parts No.
81-1200
Z1 (72-75)
R
R
Pivot Shaft & Lock Nut
R
Z1 Round Steel Swing Arm STD
Chrome pivot shaft made of S45C steel. Contains lock nut for fixing.
Parts No.
81-5291
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP (81-84)
R
Chain Slider
81-5251 : Late Model 【8mm Early Model】
Stainless Z1 (72-75)
【10mm Late Model】
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
Z1100R / GP (81-84)
156-5250 : Early Model
Chrome
Screw type
Spec
Parts No.
81-5250
156-5250
Stainless
81-5251
Unichrome 156-5251
Stainless
8mm
Early model Chrome
10mm
Late model
R
Chain Adjuster Stopper
Available for round steel swing arm.
2pcs set. M8 mounting bolt included.
Parts No.
81-5295
Z1 (72-75), Z900 (76)
R
Z1 Swing Arm Bush Set
Swing Arm Bush Set Bearing Type
R
Contains 2 stainless distance collars
and 2 teflon bushings.
Parts No.
Z1 (72-75) , Z900 (76) , Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Round bar swing arm elaborated completely in a modern technique up to the details. Improved
in total stability by changing its structure.
● 4 needle bearings are built in the pivot with line boring.
● For maintenance, grease nipples are installed in the pivot.
● The surface is finished by acrylics bake coating.
Parts No. 74-1511
● Fits 130mm tires.
81-5280
Bearing system of the pivoting part to determine the movement of the swing arm.
Seal is the genuine parts #33035-009.
Z1 (72-75), Z900 (76)
Parts No.
81-5290
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R
Rear Shock
Upper Damper
MK-2 STD Rear Shock
R
Z1 STD Rear Shock
R
A set of repairing rubber
damper for genuine rear
shocks. 2pcs set.
Parts No.
81-5368
Z1 (72-75) , Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Rear Shock Mounting Bolt
R
Free length 350mm,
upper mounting diameter
14mm and lower mounting
diameter 10mm.
A set of chrome bolt and nut.
Parts No. 81-5367 Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R = Reproduction parts
G = Genuine parts
Parts No.
109-250
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
- 20 -
type】
Black Rim
【Improved type】
【Improved
Reflector Orange
Red
Spring rate is increased
Improved 109-101 109-102
15% from original rear
Genuine 109-201 109-202
shocks.
Chrome Rim
Reflector Orange
Genuine type】
type】
【Genuine
【
Red
Spring rate is equivalent Improved 109-111 109-112
Genuine
109-211 109-212
to original rear shocks.
Clear
109-103
109-203
Clear
109-113
109-213
R
Z1 Chrome Rim
R
Spoke Set
3 types of wire spoke. Important parts for
restoration and also effective for dress up.
Unichrome, gold and chrome.
Spoke:unichrome
Nipple: zincing
Unichrome
Chrome
Gold
Spoke: hard chrome
Nipple:6kt gold
Unichrome
Model
Spec Fr / Rr
Fr: Disc (6 holes) / Rr: Drum
Z1 (72-75) , Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
72-5141 Front 1.85-19
Front
Z1 (72-75),H2
Chrome steel rim made in D.I.D. 40 holes type.
Z900 (76)
Parts No.
Fr: Disc (4 holes) / Rr: Drum
72-5142 Rear 2.15-18
Z1000 (A1-A2 / 77-78)
Fr: Disc (4 holes) / Rr: Disc
DUNLOP Tire Series
On road bias series
High quality tires
based on the TT100.
Bias tires of F11, K87.
Suitable for both of
widing road and street.
Parts No.
F11 3.25-19
12-111
TT100GP 4.00-18
Parts No.
Weight for Wire Spoke
Parts No.
Parts No.
Rear
Front
Rear
72-5173 72-5172 72-5133 72-5132 72-5138 72-5137
72-5173 72-5174 72-5133 72-5134 72-5138 72-5139
R
A set of axle shaft including
required collars, axle nuts and
split pins. Front part and rear
part are sold separately.
12-121
Parts No.
12-122
Stainless
Unichrome
Rim Band
81-5244 : for Z1
Sold by 1pc.
Parts No. 72-5011 10g
Parts No. 72-5012 20g
Parts No. 72-5013 30g
Front
K87 4.00H-18
12-112
Tire Inner Tube
Parts No.
Chrome
Gold
Rear
72-5171 72-5172 72-5131 72-5132 72-5136 72-5137
Stainless
Axle Shaft
TT100GP series
TT100GP 100/90-19
Spoke:hard chrome
Nipple:chrome
81-5150 Front 19"
81-5151 Rear 18"
81-5246 : for Z1, Z900
19" x 90-100
Parts No.
81-5153
18" x 90-140
Parts No.
81-5154
R
Wheel Hub Seal Set
Rear
Front
81-5245 : for Z900-1000
81-5247 : for Z1000 A1-A2
81-5248 : for Z1000Mk-2, Z1R
For preventing intrusions of water
and dust.
Parts No. 81-5041
Z1 (72-75), Z900 (76)
Parts No.
81-5042
Parts No.
Rear
Front
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Models
81-5043
Spec
Stainless
Unichrome
Stainless
Z900 (76)
Unichrome
Stainless
Z1000 (A1-A2 / 77-78)
Unichrome
Stainless
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Unichrome
Z1 (72-75)
Z1000J (J1-J3 / 81-83) , R (R1-R2 / 82-83)
Z1100GP (B1-B2 / 81-82), R (R1 / 84)
R
Wheel Bearing Set
Maintenance free sealed bearings. The LLU type excellent in waterproofness
by both sides rubber seal and the ZZ type excellent in durability by both sides
metal seal.
Rear
Front
Rear
Parts No.
81-5244
156-5244
81-5245
Parts No.
81-5246
156-5246
81-5246
156-5246
156-5245
81-5245
156-5245
81-5245
156-5245
Integrally molded stainless
wheel hub collars. Excellent in
durability and rust-prevention.
Rear
Front
Parts No.
LLU Type
ZZ Type
Parts No.
Parts No.
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
159-1009 81-5010
Z1000J / R (81-83), Z1100R / GP (81-84)
159-1010 81-5011
R = Reproduction parts
G = Genuine parts
74-491
Z1 (72-75)
ZZ Type
Models
Rear
Parts No.
74-492
Z1 (72-75), Z900 (76)
Front
- 21 -
81-5248
156-5248
R
Z1 Wheel Hub Collar
LLU Type
LLU Type
81-5247
156-5247
R
630 Steel Sprocket
630 size sprocket series made of S45C steel.
【Front Drive Sprocket】
Parts No. 85-001 15T
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
【Rear Driven Sprocket】
● for Rear Drum Hub
85-011
Parts No.
35T
● for Rear Disc Hub
Parts No.
Sold by a set of 6pcs for a vehicle.
81-3180 : for Z1 (72-75), Z900 (76)
85-014 42T
for Drum Hub
Parts No. 81-3180 R
Z1000A / D / J / R (77-84), Z1100R / GP / GPZ (81-85)
85-020 33T
Parts No.
Rear Hub Damper set
Z1 (72-75), Z900 (76)
Parts No.
85-021 35T
Parts No.
Z1 (72-75), Z900 (76)
85-024 42T
for Disc Hub
#42014-033
R
630 Drive Chain Series
Parts No.
81-3181 G
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
81-3181 : for Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Gold
Silver
STD
Sprocket Stud Set
R
Chain Case Mounting Bolt
R
Caulking type drive chain. Sold by 100L.
Parts No.
42-601
STD
Parts No.
42-603
Gold
Parts No.
Drive Sprocket Lock Nut
R
42-602
Silver
Driven Sprocket Lock Nut
R
6pcs set.
※Screw length is 49 mm under the screw
head. Please make sure of the screw length
before ordering.
Parts No.
87-0091
Parts No.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Unichrome M20 nut with U-lock. Screw
pitch is 1.25mm and thickness is 10mm.
Parts No.
87-0020
6pcs set of unichrome M10 nut for rear
driven sprocket. Screw pitch is 1.25mm.
Parts No.
Stainless shoulder bolt. Each 2pcs of
15.5mm and 14mm washer for mounting
chain case and center harness included.
81-1371
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R
STD Chain Case
Chain cover to prevent involution of clothing and scattering of drive chain grease.
87-0030
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
Z1000J / R (81-83) , Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76)
Drive Sprocket Lock Washer
R
Z1 Driven Sprocket Washer Set R
Parts No.
81-1368
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
81-1365
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
M20 washer to prevent the slack and the Stainless washer and mounting nut set to
prevent the slack of driven sprocket nut.
falling off of the drive sprocket nut.
Contains 3pcs washers and 6psc nuts.
Parts No.
87-0021
Z1 (72-75), Z900 (76)
R = Reproduction parts
Parts No.
G = Genuine parts
87-0031
Z1 (72-75), Z900 (76)
- 22 -
R
Z1 STD Caliper
Looks like early model
calipers, but improved
in braking force and
durability. Brake pads
are made of metalloid,
not asbestos.
Z1 (72-75)
RH
Parts No.
81-3271
LH
Parts No.
81-3272
Modify
The sealing system is highly improved and
therefore intrusions of water and dust are
reduced. The size of the surface of hose
jointing was modified into 15.5mm from
14mm. Available for standard brake pipes,
adapter of aftermarkets and also banjos.
Index No.
Parts No.
Compatibility
Parts Name
Completed Piston
Brake Pad (2pcs)
RH Caliper Support
LH Caliper Support
Caliper Slide Bolt (2pcs)
Sticker
Piston Seal
Impossible
Piston Dust Boot
Support Seal (4pcs)
Support O Ring (4pcs)
Pad Stopper
Pad Bushing
Pad Mounting Bolt
Bleeder Cap
As the parts for repairing, all the components necessary for the maintenance of this
product are supplied separately. Except a few parts, the components of this product
are compatible with the components of genuine calipers. Please use for overhaul
and also the repairing of other calipers.
R
Caliper Mounting Bolt
Bleeder
Caliper Body (Front Side)
Caliper Body (Back Side)
Impossible
Impossible
R
Brake Pad
Brake pad for supersports. Made of non-asbestos kevler fiber. 2pcs set.
Contains 2 chromoly hexagon bolts and 2 each of spring washer
and flat washer.
Parts No. 81-327/2 Front
Parts No. 81-3202 Front
Z1 (72-75)
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1 (72-75)
Parts No.
81-3281 Unichrome
Parts No.
81-3282 Chrome
R
Z1 Brake Pad Shim
Brake pad shim set between front brake
caliper piston and brake pad.
Parts No.
81-3311
Z1 (72-75)
Parts No. 81-3203 Rear
Parts No. 81-3204
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z1000J (J1-J3 / 81-83), R (R1-R2 / 82-83)
Z1100R (R1 / 84), GP (B1-B2 / 81-82)
Front / Rear
R
Stainless Special Polished Series
High-quality parts to repair calipers. Excellent in intensity and rust-prevention. Fit genuine calipers and Z1 STD calipers.
Caliper Piston
Z1 Caliper Mounting Bolt
Z1 Caliper Bleeder
Z1 Caliper Bolt
Mirror-like polished caliper piston. Frictional
resistance is drastically reduced.
Bolt for fixing caliper support on the
front fork.
Bleeder bolt for calipers. Rubber cap
included.
Bolt for fixing caliper and caliper
support.
Parts No.
81-3141
Z1 (72-75)
R = Reproduction parts
Parts No.
G = Genuine parts
81-3120
Z1 (72-75)
Parts No.
- 23 -
81-3140
Z1 (72-75)
Parts No.
81-3110
Z1 (72-75)
R
Z1 Capriper Support RH
R
Z1 4 Way Joint
R
Z1 Brake Hose Bracket
LH
RH
Casting brake hose separator for front double disc
brake.
Black coating casting caliper support for front
double disc brake.
RH and LH hose bracket. Rubber grommet included.
Z1 (72-75), Z900 (76)
RH (lower of photo)
81-3090
Parts No. 81-3271/1
Parts No.
Z1 (72-75)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Parts No.
R
STD Type Brake Hose
■ Front
LH (upper of photo)
81-3051
Parts No.
81-3052
R
Stainless 10mm Banjo Bolt Set
Upper Hose
Z1 (72-75), Z900 (76), Z1000A (77-80)
Parts No.
81-3071
STD (390mm)
Parts No.
81-3072
Short (350mm)
Parts No.
81-3073
Long (490mm)
■ Front Lower Hose
Z1 (72-75), Z900 (76)
Parts No.
81-3070
combined with Lower Pipe
Z1000A / D (77-80)
Parts No.
81-3074
Banjos at both ends
■ Rear Hose
Z1000 (A1-A2 / 77-78), Mk-2(A3 / 79), Z1R-1 (D1 / 78)
Parts No.
Front upper hose and rear hose contain protection spring.
Parts No.
R
Z1 Back Mount Brake Pipe
81-3075
A set of 2 stainless banjo bolts and 4 copper gasckets.
Bolt size M10 x PC1.25.
Z1000Mk-2 (A4 / 80), Z1R-2 (D3 / 79-80)
81-3076
Parts No.
81-3097
R
Z1 Lower Brake Pipe
Z1 Dust Boot Stopper Ring
R
Lower brake pipe
to change the
connection of
calipers.
For RH and LH
Parts No. 81-3083
Z1 (72-75), Z900 (76)
Chrome steel
steel stopper
dust boot
forstgenuine
genuine brake
brake c per.
calipers.
Parts No.
81-3155 Z1 (72-75)
RH and LH brake pipe. RH is necessary to change connection of
calipers into double disc brake.
Z1 (72-75), Z900 (76)
Parts No. 81-3080 RH
Parts No.
Parts No.
Adapter for connecting standard brake pipe with #3 Fitting
of Earl's.
Hydraulic Front Brake Switch
81-3081 LH
Z1 Caliper Piston Sealing Kit
Z1 Brake Pipe Fitting Adapter
R
R
Front Caliper Support Seals
81-3082
Z1 (72-75), Z900 (76)
Dust Cover for Front Brake
R
O ring and dust seal set for protecting
caliper pistons against dust intrution.
Parts No.
Set of 4 O rings and 4 dust seals.
Parts No.
G
Front
Diameter 43mm
Z900 (76), Z1000 (A1-A4 / 77-80)
Z1R-2 (D3 / 79-80)
Parts No.
81-3092
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R = Reproduction parts
G = Genuine parts
Dust cover for protecting front brake
switch terminal and harness connector
against ultraviolet rays, wind and rain.
Parts No. 81-3093
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
G
Caliper Piston
Front
Parts No.
81-3151
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
81-3150 Z1 (72-75)
Caliper Piston Sealing Kit
Zinc coating brake switch.
R
Z900 (76)
Z1000 (A1-A4 / 77-80)
Z1R-2 (D3 / 79-80)
81-3152
#43054-003
Z1R-1 (D1 / 78)
Parts No.
Parts No.
81-3154
Rear
Parts No.
Rear
81-3153 Z1000 (A1-A2 / 77-78)
#43053-008, #43054-004 Z1000Mk-2 (79-80)
Z1R (D1-D3 / 78-80)
- 24 -
81-3143
#43020-1012
#43054-003, #43049-1097
Parts No. 81-3144 Z1000 (A1-A2 / 77-78)
#43020-1011
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
■ Z1 Master Cylinder for Double Disc Brake
■ Master Cylinder Dust Boot R
R
Rubber dust boots for protecting banjo
bolt.
Early Model (left)
Parts No. 81-3094
Z1 (72-75)
Late Model (right)
Parts No. 81-3098
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
■ Master Cylinder Repair Kit G
Front
Z1 (72-75), Z900 (76), Z1000 (A1 / 77) (14mm)
Parts No.
81-3131 #43073-001
Z750A4 / A5, Z750D1 (76-78) (5/8mm)
Parts No.
81-3132 #43073-005
Z1000 (A2 / 78) (14mm)
Parts No.
81-3135
#49016-1010, #43020-1026
Z1000Mk-2 (A3-A4 / 79-80) (5/8mm)
Parts No.
5/8-inch master cylinder for double disc brake.
Parts No. 81-3291 Z1 (72-75)
81-3133
#49016-1010, #43020-1023
Rear
CHECK
Z1000 (A1-A2 / 77-78)
Repair Kit
81-3131 : for Z1, Z900, Z1000A1 (14mm)
Parts No. 81-3291/1
Repairing kit for genuine master cyllinder. Contains
piston, spring and other necessary parts for O/H.
■ STD Type Handle Lever
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Parts No.
81-3134
ACCESS to
Detail Page!
#43018-002, #43019-002,
#43072-004, #43024-003
■ Z1 Master Cylinder Adjusting Bolt
R
Installation hole diameter may vary according to the year's type. Please make sure before order.
R
Stainless bolt
to adjust lever of
master cylinder.
Parts No.
81-3060
Z1 (72-75), Z900 (76)
Brake Lever
Parts No.
Clutch Lever (7mm)
Clutch Lever (8mm)
81-5121
Parts No.
81-5123
Parts No.
81-5126
Z1 (72-75), Z900 (76) Z1 (72-75)
Z1 (72-75)
■ Z1 Clutch Lever Holder
R
Brake Lever
Parts No.
81-5122
Z1000A (79-80)
■ Clutch Wire Adjusting Bolt
Clutch Lever (fits also Z1R)
Parts No.
81-5124
Z900 (76), Z1000A / D (77-80)
R
■ Lever Bolt Set
R
A set of stainless bolt and nut for brake and
clutch levers.
Year
Black aluminum clutch lever holder.
Fits mirror holder of 10mm and clutch
lever screw of 7mm.
Parts No.
81-3164
Z1 (72-75)
①
Available for the 8mm wire.
Parts No.
81-3163 Chrome
Parts No.
81-3165 Black
②
③
Brake Lever Bolt
Z1 (72-75), Z900 (76)
Z1000A (77-80)
Clutch Lever Bolt
Z1 (72-75)
Z1 (72-75)
Z900 (76)
Z1000A / D (77-80)
Size of Screw (mm)
Parts No.
①
②
③
81-3173
81-3175
7 mm
8 mm
15.0 11.5 M6
15.2 12.8 M6
81-3161
81-3162
7 mm
8 mm
10.6 11.0 M5
15.0 15.0 M6
81-3166
8 mm
30.0 10.5 M6
■ Z1 Rotor Mounting Lock Washer
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
■ Z1 STD Rotor
④
Models
④
R
Stainless and chrome steel lock
washers. 3pcs set.
R
Z1 (72-75)
Steel
Parts No.
Steel
Stainless
81-3301
Stainless
Parts No. 81-3221
■ Z1 Rotor Mounting Hexagon Bolt
R
Stainless and chrome steel hexagon
bolts. 6pcs set.
Z1 (72-75)
Steel
Parts No.
Steel
■ Z1 Rotor Mounting Cap Bolt
Fully heat-treated stainless outer brake rotor. Available also for
semi-metal brake pad. Excellent in rust-prevention and braking force.
Parts No.
81-3261
Z1 (72-75)
R = Reproduction parts
G = Genuine parts
R
Chromoly cap Bolt. Screw pitch is
M8-1.00. 6pcs set.
Parts No.
- 25 -
81-3230
Z1 (72-75)
Stainless
81-3302
Stainless
Parts No. 81-3222
■ Rotor Mounting Cap Bolt
R
Stainless hexagon cap bolt. Screw
pitch is M10-1.25. 4pcs set.
Parts No. 81-3231
Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
■ Long Brake Arm
R
Stainless
■ Z1 Stainless Pull Rod
35mm longer than standard brake arm. Improved in braking
force.
Parts No.
R
■ Pull Rod with Rod End Bearing
R
81-3190 Z1 (72-75), Z900 (76)
■ Z1 Brake Pedal
R
Unichrome
SUS303 stainless pull rod.
Stainless
Z1 (72-75), Z900 (76)
Parts No.
Reduces friction loss and improves braking force.
81-3020 Stainless
Parts No. 156-3020
Unichrome
Parts No.
NEW
81-3191 Z1 (72-75), Z900 (76)
■ Stainless Pull Rod Adjuster
NEW
R
A set of adjuster for lever stroke of drum brake.
Contains adjuster, 2 rod pins and mouting hardware.
Z1 (72-75), Z900 (76)
Parts No.
Chrome steel brake pedal.
Parts No.
81-3197 Stainless
Parts No. 156-3197
81-3193 Z1 (72-75), Z900 (76)
■ Stainless Torque Rod Mounting Bolt Set
Unichrome
R
■ Z1 Torque Rod
R
Unichrome
Stainless
■ Z1 Brakeshoe
R
NEW
156-3031: Unichrome for Z1
Bolts to fix torque rod
of rear brake. Made of
SUS303 stainless steel.
Mouting hardware
included.
Models
Z1 (72-75), Z900 (76)
Z1000 A / D (77-80)
81-3031: Stainless for Z1, Z900
Spec
Stainless
Unichrome
Stainless
Unichrome
Z1 (72-75), Z900 (76)
Parts No.
81-3031
156-3031
81-3032
156-3032
Parts No.
Parts No.
■ Rear Brake Master Linkage Set
R
81-3021 Stainless
81-3030 Chrome Steel
Non-asbestos brakeshoe. Braking force is improved by kevler
of mixed lining.
Parts No. 81-3209 Z1 (72-75), Z900 (76)
■ Brakeshoe Dust Seal G
■ Drum Level Indicator G
■ Brakeshoe Washer
#41051-003. Dust seal made of
special fiber.
Z1 (72-75), Z900 (76)
Parts No. 81-3211
#41085-004. For checking severemild wear of brakeshoe.
Z1 (72-75), Z900 (76)
Parts No. 81-3208
#41045-006. Unichrome steel
washer. 2 split pins included.
Z1 (72-75), Z900 (76)
Parts No. 81-3210
#41049-012. High tension spring
connecting brakeshoes. 2pcs set.
Z1 (72-75), Z900 (76)
Parts No. 81-3212
■ Rear Brake Switch
R
G
■ Brakeshoe Spring Set G
Stainless U-shaped link set
connecting brake pedal and
push rod. Screw, lock nut and
lock nut for push rod included.
Z1000 (A1-A2 / 77-78)
Z1000Mk-2(A3 / 79)
Parts No.
75-511
■ Z1 Drum Caution Sticker R
For checking the severe-mild
wear of brakeshoe.
■ Rear Brake Switch Spring and Hook
Z1 (72-75), Z900 (76)
Parts No.
47-2016
■ Brake Pedal Return Spring
R
Unichrome return spring
made of steel.
Parts No.
Parts No.
81-3022
81-3011
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z1 (72-75), Z900 (76)
Parts No.
R
A set of unichrome spring
and hook connecting rear
brake pedal and brake
switch. 2 stainless split
pins included.
81-3023
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
Early model-like rear brake switch.
Parts No. 81-3010
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R = Reproduction parts
G = Genuine parts
- 26 -
■ Carburetor O/H Kit
R
■ Fuel Tap O/H kit
R
O ring set for O/H of genuine fuel tap.
Parts No.
81-2200 : for Z1
Contains upper and lower seals, needles, main and
pilot jet, float valve and air screw.
Parts No.
81-2200
Parts No.
Z1 (72-75)
Parts No.
81-2150
Z1 (72-75), Z900 (76), Z1000 (A1 / 77)
Z1R (D1-D3 / 78-80), Z1100GP (B1-B2 / 81-82)
GPZ1100 (A1-A3 / 83-85)
■ Z1 Throttle Lever Metal Set
R
81-2202
Z900 (76), Z1000A / D (77-80)
81-2217
Z750A / D (76-78), Z750FX1 (79-80)
Parts No.
■ Carburetor Float Seal Set
81-2219
Z400FX (E1-E3)
■Carburetor Cover Screw R
Available for top and float
cover of standard Mikuni
VM carbretor. 24 pcs set.
R
Special rubber seal set. Effective for carbretor
suffering from gasoline leak. 4pcs set.
Parts No.
Oilless metal set for
throttle lever. 8pcs set.
81-2114
Parts No.
Z1 (72-75)
Parts No.
81-2175
Z1 (72-75)
81-2115
Z900 (76)
Z1000A / D (77-80)
Parts No.
Parts No.
■ Z1 Carburetor Lock Washer R
■ Z1 Fuel Pipe T connector G
Exchange at the time of the
overhaul of the carburetor is
recommended.
#16046-002. For use on 1/2" and
1/4" fuel lines.
Z1 (72-75)
Parts No.
■ Accelerator Pump O/H Kit
R
81-2110 Z1 (72-73)
81-2111
81-2112
Parts No.
Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1R-1 (D1 / 78)
Z1 (74-75)
Parts No.
81-2113
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
■ Overflow Hose Set
R
Parts No.
Z1 (72-75)
81-2177
81-2185
■ Overflow Hose Clamp
G
For genuine carbretor of Z1000Mk-2 and
Z1R-2. Valve balls, weights and connecting
hose included.
Parts No.
81-2176
■ L-shaped Fuel Pipe
L-shaped rubber fuel
pipe. Total length is
140mm (80mm vertical
and 60mm horizontal).
Available for hoses
6-8mm in internal
diameter.
#92037-134.
Rubber clamp for
fitting overflow hose.
Parts No.
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
81-2182
Z1 (72-75), Z900 (76)
Z1000A / D (77-80)
Parts No.
81-2184
■ Universal Fuel Filter
Made of hypalon (outer) and NBR (inner). 2 meters
of hoses with 4 hose clips. Internal diameter is 3mm.
Parts No. 81-2181
High performance compact inline filters. Straight type and L-shaped type are lined up.
for 8mm Hoses
(with magnet)
for 6mm Hoses
Parts No. 81-2180
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
for 8mm Hoses
(with magnet)
■ Fuel Hose / Clip
Parts No.
Parts No.
81-2186
Straight Type
L-shaped Type
■ Fuel Line Separator
■ Fuel Line Size Conversion Adapter
Separator for branching fuel
hose made of reinforced plastic.
● Y-shaped
Separator
Parts No.
14-9423 for 6mm Hoses
High-quality fuel hose made of dual structure rubber. Sold by
50cm long unit. Hose clip for fitting is also lined up.
Parts No.
14-9424 for 8mm Hoses
Fuel Hose for 7-8mm
● T-shaped
Parts No.
Clips for 12-13mm
72-444
R = Reproduction parts
Parts No.
72-442 2pcs
G = Genuine parts
81-2187
for 6mm Hoses
Parts No. 81-2183
- 27 -
Separator
Parts No.
14-9421 for 6mm Hoses
Parts No.
14-9422 for 8mm Hoses
Aluminum conversion
adapter connecting fuel
hose to carbretor or filter
with different diameter.
Available for converting
6mm into 8mm.
Parts No.
14-9429
■ Insulator Set
■ Insulator &
Air Cleaner Band
R
Adapter for mounting a carburetor on the cylinder head. Sold by a set of 4pcs.
R
Sold by a set of 4pcs.
■ Insulator Side
Parts No.
14-9411
ID 43-47mm
Z1 (72-75), Z900 (76)
Z1000A / D (77-80)
Parts No.
14-9410
ID 48-53mm
Z1000J / R (81-83)
Z1100R / GP / GPZ (81-85)
for Z1, Z900-1000
Parts No.
■ Air
81-2240 Inner Diameter 34mm (Fits Insulator Band No. 14-9411.)
14-9409
ID 43-47mm
Z1 (72-75), Z900 (76)
Z1000A / D (77-80)
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
■ Air Cleaner Duct Set
R
Connects standard air cleaner box and carbretor.
Fits air cleaner band No. 14-9409. 4pcs set.
for Z1000-1100J / R / GP / GPZ
Parts No.
Cleaner Box Side
Parts No.
Parts No.
81-2363
Inner Diameter 34mm
Z900 (76), Z1000A / D (77-80)
14-9400 Inner Diameter 40mm (Fits Insulator Band No. 14-9410.)
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
■ Insulator Mounting Bolt
R
A set of unichrome bolts for fitting insulators.
Hexagon Bolts (left)
Parts No.
Plus Bolts (right)
14-9412
Parts No.
14-9413
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
※ Usable for fitting a large-diameter carburetor to Z series of 72-80 model.
■ Air Filter
R
■ Z1 Air Cleaner Box
R
Air cleaner box for normal carburetor of
Z1. Fits air cleaner band No. 14-9409.
Z1 (72-75)
Air Cleaner Box
Parts No.
81-2361
Air Cleaner Cap
Parts No.
81-2162 :
for Z1000J / R, Z1100R / GP
81-2161 :
for Z900, Z1000A / D
81-2362
81-2160 : for Z1
Periodic exchange is required.
Parts No.
81-2160
Z1 (72-75)
Parts No.
81-2161
Z900 (76), Z1000A / D (77-80)
Parts No.
81-2162
Z1000J / R (81-83), Z1100R / GP (81-83)
■ Filter Cover O Ring
R
A set of O rings for filter cover, drain
bolt and filter screw.
Parts No. 81-2416
Parts No. 81-2417
Z1 (72-75), Z900 (76) Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
■ Oil Line Plug
■ Oil Filler Cap
G
G
■ Oil Filter Bolt
R
Mounting O ring included.
#92066-021. O ring included.
Parts No. 81-2245
#16115-1062. O ring included.
Parts No. 81-2246
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
■ Oil Filter
R
■ Drain Bolt
R
Parts No. 156-2402
Z1 (72-75), Z900 (76)
Parts No. 156-2403
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
■ Oil Tank Filter Adapter
R
Made of duracon resin.
Filter for preventing the
intrusion of dust is attached
inside.
81-2171 :
for Z1000J / R, Z1100R / GP / GPZ
Parts No.
136-305
Z1 (72-75), H2
81-2170 :
for Z1, Z900, Z1000A / D
Periodic exchange is required.
Parts No. 81-2170
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
Parts No.
81-2171
Chrome oil drain bolt
made of steel. Mounting
O ring included.
Parts No.
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
R = Reproduction parts
G = Genuine parts
81-2401
Z1 (72-75), Z900 (76)
Z1000A / D (77-80)
- 28 -
■ Dynamo Cover
■ Point Cover
R
■ Point Base
R
R
Semi-polished aluminum point base.
Early model point cover.
Parts No. 81-2257
Semi-polished aluminum dynamo cover.
Parts No. 81-2258
Parts No. 156-2248
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
■ Clutch Cover
R
■ Starter Cover
R
Polished round type and black painted square
type are lined up.
Chrome steel starter cover.
Parts No. 81-2249
Parts No.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
69-101
■ Oil Level Gauge
Parts No.
69-102
Z1 (72-75), Z900 (76)
Z1000A / D (77-80)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
■ Knock Pin Set
R
G
■ Cam Cover Mounting Bolt Set
Available for genuine
clutch cover and also
other clutch covers .
Chrome steel hexagon
bolts with flanges.
16 pcs set.
Z1 (72-75), Z900 (76)
Z1000A / D (77-80)
Parts No.
81-2259
Parts No. 72-273
#92043-1037, #92043-1266
Parts No. 72-274
#92042-007, #92043-1037
■ Engine Bolt Set
Bolts for assembly of engine. Unichrome steel bolt set consists of plus bolts and hexagon bolts and stainless steel cap bolt set excellent in intensity and rust-prevention.
■ Engine
■ Crank
Cover Bolt
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
■ Oil Pan Bolt
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
Case Bolt
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
For cam cover, point cover, point base, clatch
cover, kick cover, dynamo cover, sprocket cover.
Parts No.
81-2010 51pcs
81-2017
Parts No.
22pcs
81-2016
22pcs
Parts No.
81-2012
10pcs
81-2008
22pcs
Parts No.
81-2006
10pcs
Unichrome Steel Bolt
For point cover, point base, clatch cover, kick
cover, dynamo cover, sprocket cover.
Parts No.
81-2011 35pcs
R = Reproduction parts
Parts No.
G = Genuine parts
81-2009
Parts No.
22pcs
- 29 -
R
■ Transmission Cover Bolt
Z1 (72-75), Z900 (76), Z1000-1100 (77-85)
Stainless Cap Bolt
Parts No.
81-2004
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83), Z1100R / GP / GPZ (81-85)
for Cylinder (4pcs)
for Engine Cover (8pcs)
Parts No.
R
■ Stator Coil
R
72-083 :
for Mk-2 ((A3-A4)
A3-A4) , Z1R-2 ((D3)
D3)
72-611 : for Z1, Z900, Z1000 (A1- A2), Z1R-1(D1)
72-074 :
for Z1000J / R, Z1100R / GP / GPZ
■ Stator Coil Harness
R
Rubber grommet and harness included. Rubber grommet is
sold also by 1pc.
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1R-1 (D1 / 78)
Parts No.
72-611
Rubber Grommet Only
Parts No.
72-083
Z1000Mk-2 (A3-A4 / 79-80), Z1R-2 (D3 / 79-80)
Parts No. 81-4035/1
Parts No.
72-074
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
■ Oil Pressure Switch & Rubber Grommet
All-in-one harness set to solve the oil leak from stator coil grommet.
Rubber grommet, wire, connecting terminals and coupler included.
Parts No.
81-4035
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
■ Starter Motor Relay
Screw Type
Bullet Terminal Type
A set of round type rubber grommet boot and
starter cover grommet. A cord with ring terminal
and bullet terminal included.
Z1 (72-75)
Rubber Grommets Only
Parts No.
Parts No.
81-4380
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z900 (76), Z1000A / D (77-80)
Z1000J / R (81-83)
Parts No.
Oil Pressure Switch
Parts No.
Waterproof cover and harness connected with
bullet terminal.
Rubber Grommets Only
81-4038 R
R
Improved starter motor
relay equivalent to the
rated output 100A.The
capacity increased by
30%. 12V generic type.
81-4036 R
Oil Pressure Switch
81-4041 G
Parts No.
#16144-002
81-4042 G
#27010-1013
■ Z1 Magnet Rotor Mounting Bolt R
■ Kick Pedal
■ Starter Motor
Lead Wire
R
R
For fitting the starter motor of
GPZ on Z series ('72-'80).
Waterproof dust boot included.
Parts No.
72-084
Z1000J / R (81-83)
Z1100R / GP / GPZ (81-85)
A set of High strength bolt and
genuine parts #92038-001.
Parts No.
■ Starter Motor
72-272
Z1 (72-75) , Z900 (76)
■ Z1 Magnet Rotor
R
Generation amount of this product
decreases by a secular change surely.
Early exchange is recommended.
Parts No.
72-271
Z1 (72-75), Z900 (76)
R = Reproduction parts
Casting-made chrome kick pedal. Mounting
screw and washer included.
Parts No.
Parts No.
72-080
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
81-3198
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Mk-2 (A3-A4 / 79-80)
G = Genuine parts
Lead wire set (No. 72-084) is required for
fitting on Z series(72-80).
- 30 -
R
R
Complete Gascket Series
34-59002 : for Z1 (72-73)
Essential gascket set for engine maintenance. All-in-one set of gasckets, seals
and O rings.
Models
Complete Set
Gascket for repair
Cylinder Head
Z1 (72-73)
34-59000
34-94001
Z1, Z900 (74-76)
34-59002
34-94002
Z1000A (77-78), Z1R-1 (78)
34-59003
34-94003
Z750FX-1 (79-80)
34-59011
34-94002
Mk-2 (79-80), Z1R-2 (79-80)
34-59010
34-94003
Z1000J / R (81-83)
34-59007
34-94004
Z1100R / GP / GPZ (81-85)
34-59006
34-94005
Cam Cover
34-93001
34-93002
Tensioner
Clatch Cover
34-92053
34-92050
Transmission Cover
Point Cover
Dynamo Cover
Point Base
Cylinder Base
Oil Pan
34-92052
34-92051
34-92054
W5380
34-92055
34-92057
(79) 34-92057
(80) 34-92058
34-92058
34-93003
34-92061
34-92056
34-92059
Transmission cover gascket for Z1000Mk-2/Z1R-2 varies in article number by age type.
1979: No.34-92057 1980: No.34-92058
Tensioner gascket for 81-85 for Z1000-1100J, R, GP, GPZ is an O ring.
R
Cam Cover Gascket Heavy Duty Type
R
Center Cylinder O Ring Heavy Duty Type
For preventing oil leak and oil
intrusion from cam chain tunnel .
Graphite composite Gascket.
163-201 Round Type
Parts No.
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
Parts No.
Parts No.
163-202 Square Type
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
R
Valve Stem Seal
A set of 8pcs for a vehicle. Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83), Z1100R / GP / GPZ (81-85)
Parts No.
81-2140 STD
Fluorine Valve Stem Seal
Steel ring is wound round outside.
Made of fluororubber of Viton©.
81-2141
Parts No.
Crankcase Oil Seal Set
Parts No.
81-2130
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
81-2142
R
Cam End Plugs
Aluminum cam end plugs
with a notch in the connecting
surface to the cylinder head.
Parts No. 72-152
R
All-in-one set of oil seals for engine O/H.
Improved Valve Stem Seal
Parts No.
163-211
Z1 (74-75) , Z900 (76)
Z1000 (A1-A2 / 77-78)
Silver
Parts No. 72-154
Semilunar rubber cam end plug. 4pcs set.
Parts No.
Black
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R = Reproduction parts
G = Genuine parts
69-2120
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Rubber cam end plugs. R-type (only rubber-made) and
J-type (aluminum coating only in the front part ).
Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
R Type Black
Parts No.
- 31 -
81-2121
J Type Silver
Parts No.
81-2122
R
Cam Chain Idler
Top quality tensioner with idler gear which is the same
size as the standard roller. Available for preventing a
clattering caused by the tension of cam chain and a gap
of valve timing.
Parts No.
72-266
Z1 (72-75), Z900 (76)
Parts No.
72-268
Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
Parts No.
72-267
Z1000Mk-2 (A3-A4 / 79-80)
Z1R-2 (D3 / 79-80)
R
Cam Chain Idler Sprocket
G
Cam Chain Damper Set
#92075-119 and #92075-120 (No. 72-264),
#92075-289 (No. 72-265). Rubber damper set for top idler.
Parts No.
Parts No.
72-264
72-265
Parts No.
Z1 (72-75), Z900 (76)
G
A set of genuine shafts #92075-232 and rubber dampers.
Parts No.
72-060
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1000A / D (77-80)
Cam Chain Idler Sprocket Shaft
Available for normal engines and high tuned engines.
72-063
R
Cam Chain Roller & Shaft
#12053-019.
Parts No. 72-065
A set of roller, dampers and genuine shaft #92075-123.
Parts No.
G
Cam Chain Guide
72-064
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Cam Chain Tensioner with Idler
R
Tensioner with idler gear which is the same size as the
standard roller.
Parts No.
72-069
R
Cam Chain Tensioner STD
Standard tensioner with supecial rubber roller. Availeble
for normal engine.
Parts No.
72-059
D.I.D Cam Chain
Low friction type cam chain with high strength.
Parts No.
72-050 122L
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78), Z1R-1 (D1 / 78)
72-051 124L
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Parts No.
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
Z1000Mk-2 (A3-A4 / 79-80), Z1R-2 (D3 / 79-80)
R
Automatic Cam Chain Tensioner
Cam chain tensioner with standard and hard
type spring. Tensioner gascket included.
R
Manual Cam Chain Tensioner
Cam chain tensioner
with 10mm special
tension shaft screw.
Tesioner gascket
included.
Parts No.
72-070
Z1 (72-75), Z900 (76)
Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80)
Z1R (D1-D3 / 78-80)
Parts No.
72-623
Z1 (72-75), Z900 (76), Z1000 (A1-A2 / 77-78)
Z1000Mk-2 (A3-A4 / 79-80), Z1R (D1-D3 / 78-80)
R = Reproduction parts
G = Genuine parts
- 32 -
■ Valve Set
R
■ Valve Guide Set
R
■ Z1 Valve Cotter Pins
R
Cotter pins for the
valve with square
ditch. Available for
genuine valve of Z
series and also the
valve set.
(No. 81-2385)
2pcs set.
Parts No. 81-2386
Z1 (72-75), Z900 (76)
■ STD Cylinder Head Nut Set
Size, the quality of the material, production method
etc. are equivalent to a genuine product.
A set of 4 each of intake valve and exhaust valve.
Parts No. 81-2385
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
■ SCM Billet Cylinder Head Nut Set
Size, the quality of the material, production method etc.
are equivalent to a genuine product.
A set of 4 each of intake valve and exhaust valve.
Parts No.
81-2381 STD
Parts No.
81-2383 0.10mm O/S
Parts No.
81-2382 0.05mm O/S
NEW
NEW
Z1 (72-75), Z900 (76) , Z1000A / D (77-80)
R
■ Cylinder Head Nut Washer Set
R
72-346
Early Model
72-341
Late Model
72-347
Middle Model
3 types
line upavailable
availableforforearly,
early,middle
middleand
andlate
latemodel
modelofofZ1.
Z1.
12pcs set.
set
Early Model 15.5mm in height
72-346
Parts No.
R
Z1 (72-75)
Middle Model 17.5mm in height
Parts No.
72-347
R
Z1 (72-75)
Late Model 18.5mm in height
Chromoly cylinder nut excellent in durability. 12pcs set.
Silver Chrome
Parts No.
72-342
Black Chrome
Parts No.
Parts No.
72-344
72-349
R
■ Chromoly Crank Studs
Parts No.
72-341 G #92015-076.
Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
■ Cylinder Plug Rubber Grommets
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
■ Chromoly Cylinder Studs
Essential washers for cylinder head. Washers fitted at both
ends function as gascket for oil line to the cylinder head.
R
A set of 8pcs.
Fitted between cooling
fins under the cylinder.
R
Parts No.
72-345
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
■ Z1 Sleeve
R
Sleeve for returning
the cylinder which is
bored too much to over
bore, and damaged
seriously to standard
spec.
Parts No. 45-KA250
Chromoly studs. 12pcs set. 5mm longer than standard.
Parts No. 40-0801
Chromoly crank studs. 12pcs set.
Parts No. 40-4331
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
Z1 (72-75), Z900 (76)
■ Casting Piston Kit
■ Cam Shaft Bush Set R
R
Piston kit of which oversize
is +0.5mm, +1.0mm and
+1.5mm in comparison with
standard.
This kit can be tuned up as
standard engine feeling.
16pcs set of cam shaft metal.
Parts No.
72-061
Z1 (72-75), Z900 (76)
Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
【Kit Contents】
●
●
●
●
Piston
Piston Ring
Piston Pin
Circlip
for 4 cylinders each
Z1 (72-75), Z900 (76)
Comp. Ratio 8.5 : 1
Bore / Over Size
72-561
Parts No. 72-562
Parts No. 72-563
66.5 Φ / 0.5mm
67.0 Φ / 1.0mm
67.5 Φ / 1.5mm
Parts No.
Z2 (72-75)
Comp. Ratio 9.0 : 1
Bore / Over Size
72-471
Parts No. 72-472
Parts No. 72-473
64.5 Φ / 0.5mm
65.0 Φ / 1.0mm
65.5 Φ / 1.5mm
Parts No.
for Z1
R = Reproduction parts
G = Genuine parts
- 33 -
for Z2
■ Clutch Conversion Kit
Replaces the clutch of 72-80 Z series with
reliable clutch of Z1000J.
■ Clutch Plates
R
【Kit Contents】
G Genuine Parts
#13095-1037 Complete housing
#13087-1015 Hub assy
#13187-1006 Operating plate assy #92022-1221 Thrust washer
#92026-022 Mounting washer
#92027-1284 Radial bush
R Reproduction Parts
Friction plate Steel plate Push rod
Parts No.
72-261
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
■ Transmission Bearing Set
R
Clutch plate set improved on strength and wear resistance.
● Z1 (72-75), Z900 (76), Z1000A / D (77-80)
● Z1000J / R (81-83), Z1100R / GP / GPZ (81-85)
Friction Plates (8pcs) Clutch Spring (5pcs)
Parts No. 81-2371
Parts No. 81-2373
Z1000J/R/GP
Friction Plates (9pcs) Clutch Spring (5pcs)
Parts No. 81-2374
Parts No. 81-2373
Steel Plates (7pcs)
Parts No. 81-2372
Steel Plates (8pcs)
Parts No. 81-2375
■ Clutch Pusher
R
Z1100R, GPZ1100
Clutch Spring (6pcs)
Parts No. 81-2376
■ Clutch Push Rod
R
Transmission bearings for input and output shaft. 6pcs set.
Parts No.
72-062 Z1 (72-75), Z900 (76), Z1000A / D (77-80)
■ Neutral Switch
R
■ Shift Lever Return Spring
G
Clutch pusher to ensure the clutch meet and
improve friction plates in durability.
Parts No.
40-1025
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
High strength clutch push rod made of
quenched SCM435 chromoly.
Parts No.
■ Shift Change Lever
Parts No.
81-3171 #92081-1129
Z1 (72-75)
Parts No.
81-4037
Parts No.
Z1 (72-75), Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
81-3172 #92083-028
Z900 (76), Z1000A / D / J / R (77-83)
Z1100R / GP / GPZ (81-85)
■ Shift Pedal
R
Chrome steel shift pedal. Pedal rubber is sold separately.
Pedal Rubber Only
Parts No. 81-3196
Excellent in durability and wear resistance.
Parts No. 81-3194
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
R = Reproduction parts
G = Genuine parts
Parts No.
81-3195
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
- 34 -
72-483
Z1 (72-75), Z900 (76), Z1000A / D (77-80)
R
Painted Body Set
The craftsmen who continue painting mainly motorcycles finish the painted body one by one
in the skillfull technique. It will surely bring the higher brightness to your motorcycle than a new car.
The set contains steel press tank, ABS side covers and tail cowl. The paint is made of hard urethane.
It means this body set is excellent in durability against color fade-out caused by aging.
■ Z1 73 Model
●
Brown & Orange
■ Z1 73 Model
●
Painted Full Set
● Painted Single Article
Parts
82-36011 Tank
82-36014 Tail Cowl
■ Z1A 74 Model
●
● Painted Single Article
Parts No.
Parts
Parts No.
82-36012 Side Cover (RH)
82-36013 Side Cover (LH)
Green & Yellow
■ Z1A 74 Model
●
Painted Full Set
82-36031 Tank
82-36034 Tail Cowl
Parts No.
Parts
82-36022 Side Cover (RH)
82-36023 Side Cover (LH)
Brown & Orange
Painted Full Set
Parts No. 82-36040
● Painted Single Article
Parts
Parts
82-36021 Tank
82-36024 Tail Cowl
Parts No. 82-36030
Parts No.
Painted Full Set
Parts No. 82-36020
Parts No. 82-36010
Parts No.
Green & Yellow
● Painted Single Article
Parts No.
Parts No.
Parts
82-36032 Side Cover (RH)
82-36033 Side Cover (LH)
Parts
82-36041 Tank
82-36044 Tail Cowl
Parts No.
Parts
82-36042 Side Cover (RH)
82-36043 Side Cover (LH)
Attention : Caps and emblems placed in the photograph are attached as reference for photography, not included in the painted body set.
- 35 -
Painted Body Set
■ Z1B 75 Model
●
■ Z1B 75 Model
Blue, Black & Gold
●
Painted Full Set
Painted Full Set
Parts No. 82-36050
Parts No. 82-36060
● Painted Single Article
● Painted Single Article
Parts No.
Parts
82-36051 Tank
82-36054 Tail Cowl
Parts No.
Parts
Parts No.
82-36052 Side Cover (RH)
82-36053 Side Cover (LH)
Maroon, Black & Gold
Parts
82-36061 Tank
82-36064 Tail Cowl
Parts No.
Parts
82-36062 Side Cover (RH)
82-36063 Side Cover (LH)
■ Z1000Mk-2 A3-A4 / 79-80 Model Blue, White & Gold
■ Z1000Mk-2 A3-A4 / 79-80 Model
●
●
Painted Full Set
● Painted Single Article
Parts
82-36081 Tank
82-36084 Tail Cowl
Painted Full Set
Parts No. 82-36070
Parts No. 82-36080
Parts No.
Red, White & Gold
● Painted Single Article
Parts No.
Parts
Parts No.
82-36082 Side Cover (RH)
82-36083 Side Cover (LH)
Parts
82-36071 Tank
82-36074 Tail Cowl
Parts
Parts No.
82-36072 Side Cover (RH)
82-36073 Side Cover (LH)
■ Z1 Paint Base
●
Full Set
Parts No. 82-36000 Full Set
● Single Article
Parts No.
73-180
81-1012
81-1010
81-1011
■ Z1000Mk-2 A3-A4 / 79-80 Model Paint Base
■ Z1 Solid Black
●
●
● Single Article
Parts No. 82-36310
Parts No.
● Painted Single Article
Parts No.
Parts
Full Set
Parts No. 82-36001
Painted Full Set
82-36311 Tank
82-36314 Tail Cowl
Parts
Tank
Tail Cowl
Side Cover (RH)
Side Cover (LH)
Parts No.
73-321
69-201
69-202
69-203
Parts
82-36312 Side Cover (RH)
82-36313 Side Cover (LH)
Parts
Tank
Tail Cowl
Side Cover (RH)
Side Cover (LH)
Attention : Caps and emblems placed in the photograph are attached as reference for photography, not included in the painted body set.
- 36 -