BT AP-111 - Amp`ed RF Wireless Technology

BT AP-111
The BT AP-111 is a Bluetooth to Ethernet Bridge. Supporting up to 7
Simultaneous Bluetooth connections, our BT-AP-111 is a powerful,
yet cost effective access point solution. The BT-AP-111 typically
supports the Bluetooth SPP profile along with our proprietary
BlueGuard security layer, which makes it ideal for payment Card
Industry applications.
Bluetooth features
10/100 Mbit Ethernet port
Telnet Port configuration – up to 7 ports
UART up to 921Kbaud
Power, connection, and traffic LED indicators
7 Simultaneous BT Connections
Class I Bluetooth 100m range
Support our BlueGuard data security application
Internal antenna
Hardware configuration
Power : 5~9V DC, with 2.1mm jack.
LEDs: BT Link, Power, Ethernet Connection,
Ethernet Traffic, Connector.
Embedded software
IP configuration with static IP address or DHCP
Telnet server for access to serial port (VCP
software included)
UDP responder for device discovery
Telnet client for Ethernet-based serial port
Amp’ed RF Technology Bluetooth
We’ve teamed up with ST Microelectronics and ST Ericsson to offer
you the most advanced Bluetooth technology in a variety of highly
reliable and affordable platforms. Our Bluetooth Upper Layer Stack,
Amp’ed UP, and AT command serial interface, abSerial, give you
options ranging from complete turnkey solutions to licensing our
designs and firmware – options our competitors simply don’t have.
Phone: +1 408 213-9530 | Fax: 408-213-9533 | E-mail:
Address : 1879 Lundy Ave, ste. 138, San Jose, CA 95131
电话:+86 022-83945100 | 传真:+86 022-83945100 转 111 | E-mail:
地址:天津市华苑产业区海泰西路 18 号西 3B-202(300384)