TA4032FT
TOSHIBA Linear Integrated Circuit Silicon-Germanium Monolithic
TA4032FT
○ UHF Band Low Noise Amplifier Applications
・Thin Extreme Super mini Quad Package (4pin) : TESQ
FEATURES
•
Low Noise Figure: NF = 1dB (typ.) (@ f=1.575GHz)
•
High Gain:|S21e| = 14.8dB (typ.) (@ f=1.575GHz)
•
ESD immunity level improvement of TA4020FT.
2
TESQ
Weight: 1.5mg (typ.)
Marking
4
3
U6
1
No.
Pin Name
1
2
3
4
INPUT
GND
OUTPUT
VCC
2
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
Voltage at pin Vcc
VCC
5
V
Output Voltage
VOUT
3
V
Current into pin Vcc
ICC
15
mA
Total Power dissipation
PD
100
mW
Junction temperature
Tj
150
°C
Operate temperature Range
Topr
−40 to 85
°C
Storage temperature Range
Tstg
−55 to 150
°C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operation range
Characteristics
Voltage supply
Symbol
Test Condition
Min
Typ.
Max
Unit
VCC
⎯
2.5
3
5
V
Start of commercial production
2008-12
1
2014-03-01
TA4032FT
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Circuit Current
Test Condition
ICC
VCC = 3V
2
|S21e| (1)
Insertion Gain
2
|S21e| (2)
2
|S21e| (3)
ZS=ZL=50Ω
VCC = 3V, f = 1.575GHz , ⊿f = 1MHz
ZS=ZL=50Ω
rd
RLin
Output return loss
VCC = 3V, f = 1.575GHz , ⊿f = 1MHz
ZS=ZL=50Ω
VCC = 3V, f = 1.575GHz
ZS=ZL=50Ω
VCC = 3V, f = 1.575GHz
RLout
Isolation
ZS=ZL=50Ω
VCC = 3V, f=2.4GHz
IIP3
Input return loss
VCC = 3V, f = 2.4GHz
ZS=ZL=50Ω
rd
OIP3
ZS=ZL=50Ω
VCC = 3V, f = 2GHz
NF(2)
3 order intermodulation distortion
output intercept point
VCC = 3V, f = 2GHz
ZS=ZL=50Ω
NF(3)
3 order intermodulation distortion
input intercept point
ZS=ZL=50Ω
VCC = 3V, f = 1.575GHz
NF(1)
Noise Figure
VCC = 3V, f = 1.575GHz
ZS=ZL=50Ω
VCC = 3V, f = 1.575GHz
ISL
ZS=ZL=50Ω
Min
Typ.
Max
Unit
3.8
5
6.5
mA
13
14.8
⎯
dB
11
13
⎯
dB
10
11.7
⎯
dB
⎯
1
1.2
dB
⎯
1.05
1.25
dB
⎯
1.15
1.4
dB
-11
-8.2
⎯
dBmW
2
5.9
⎯
dBmW
⎯
5.6
⎯
dB
⎯
7.8
⎯
dB
⎯
24.3
⎯
dB
Caution:
This device is sensitive to electrostatic discharge due to the high frequency transistor process of
fT=60GHz class is used for this product.
Please make enough tool and equipment earthed when you handle.
4
3
1
2
Equivalent Circuit
2
2014-03-01
TA4032FT
RF Test Circuit (Top View)
SMA
47pF
Signal
Generator
50ohm
VCC
VCC
IN
100 pF
GND
OUT
27 pF
10000 pF
Network
Analyzer
50ohm
SMA
Fig.1 S21，RLin，RLout，ISL Test Circuit
SMA
47pF
VCC
VCC
IN
Noise
Source
50ohm
100 pF
GND
Fig.2 NF
OUT
27 pF
10000 pF
Noise
Meter
50ohm
SMA
Test Circuit
Signal
Generator
50ohm
SMA
Splitter
Signal
Generator
50ohm
47pF
IN
VCC
VCC
100 pF
GND
OUT
27 pF
10000 pF
SMA
Network
Analyzer
50ohm
Fig.3 OIP3，IIP3 Test Circuit
Notice
The circuits and measurements contained in this document are given only in the context of as examples of applications
for these products.
Moreover, these example application circuits are not intended for mass production, since the high-frequency
characteristics (the AC characteristics) of these devices will be affected by the external components which the customer
uses, by the design of the circuit and by various other conditions.
It is the responsibility of the customer to design external circuits which correctly implement the intended application,
and to check the characteristics of the design.
TOSHIBA assume no responsibility for the integrity of customer circuit designs or applications.
3
2014-03-01
TA4032FT
2
ICC-VCC
|S21e| -VCC
20
12
15
2GHz
2.4GHz
2
Insertion gain |S21e| (dB)
Circuit current ICC (mA)
1.575GHz
10
8
6
4
2
10
5
0
0
0
1
2
3
4
5
1
6
2
Supply voltage VCC (V)
3
2
6
RLin -f
0
Input return loss RLin (dB)
25
20
2
Insertion gain |S21e| (dB)
5
Supply voltage VCC (V)
|S21e| -f
15
10
3V
2.85V
2.3V
5
-3
-6
2.3V
-9
2.85V
3V
-12
-15
0
0
1
2
3
0
4
Frequency f (GHz)
1
2
3
4
Frequency f (GHz)
RLout-f
ISL - f
0
-10
-15
-4
Isolation ISL (dB)
Output return loss RLout (dB)
4
-8
-12
2.3V
2.85V
3V
-16
2.3V
-20
2.85V
3V
-25
-30
-35
-20
-40
0
1
2
3
4
0
Frequency f (GHz)
1
2
3
4
Frequency f (GHz)
4
2014-03-01
TA4032FT
NF-VCC
3
Noise figure NF (dB)
2.5
2
2.4GHz
1.5
2GHz
1.575GHz
1
0.5
0
1
2
3
4
5
6
0
Vcc=3V
Offset=1MHz
-10
Output level Pout (dBmW)
Third order intermodulation distortion IM3 (dBmW)
IM3/Pout-Pin
-20
-30
1.575GHz
2GHz
-40
2.4GHz
-50
-60
1.575GHz
-70
2.4GHz
2GHz
-80
-60
-50
Supply voltage VCC (V)
-40
2.4GHz
15
2GHz
1.575GHz
10
5
0
-5
4
5
6
input intercept point IIP3 (dBmW)
Third order intermodulation distortion
output intercept point OIP3 (dBmW)
0
5
Pin=-30dBmW
Offset=1MHz
2.4GHz
0
2GHz
1.575GHz
-5
-10
-15
1
2
3
4
5
Supply voltage VCC (V)
Supply voltage VCC (V)
⊿Pout-Pin
⊿Pout-Pout
0
6
0
Vcc=3V
Vcc=3V
-0.5
⊿Pout (dBmW)
-0.5
⊿Pout (dBmW)
Third order intermodulation distortion
Pin=-30dBmW
Offset=1MHz
3
-10
IIP3-VCC
20
2
-20
Input level Pin (dBmW)
OIP3-VCC
1
-30
-1
-1.5
1.575GHz
-2
-25
-20
2GHz 2.4GHz
-15
Input power level Pin (dBmW)
2GHz
2.4GHz
-1
-1.5
-2
-15
-10
1.575GHz
-10
-5
0
5
Output power level Pout (dBmW)
5
2014-03-01
TA4032FT
GP-Pin
PD-Ta
300
20
15
Total power dissipation PD (mW)
Vcc=3V
1.575GHz
GP (dB)
2GHz
2.4GHz
10
5
0
-60
-50
-40
-30
-20
-10
275
250
225
200
175
150
125
Free Air
100
75
50
25
0
Input power level Pin (dBmW)
0
0
25
50
75
100
125
150
175
Ambient temperature Ta (°C)
NFminΓopt
+ｊ50
+ｊ25
Frequency
Vcc(V)
(GHz)
+ｊ100
2GHz
1.575
2.5V
+ｊ10
2.85V
2.4GHz
+ｊ250
1.575GHz
3V
2.5V
2.85V
2.5V
3V
2.85V
3V
0
25
50
100
2
∞
-ｊ250
-ｊ10
2.4
-ｊ100
-ｊ25
NFminΓopt
Rn
NF(dB)
mag.(-)
ang.(°)
3
0.85
0.255
58.3
8.1
2.85
0.87
0.258
60.2
8.4
2.5
0.89
0.295
60.6
9.2
3
0.95
0.201
73.8
8.3
2.85
0.96
0.229
80.2
7.3
2.5
0.97
0.263
81.3
6.8
3
1.05
0.159
95.3
6.9
2.85
1.10
0.107
86.2
6.2
2.5
1.17
0.097
85.8
6.0
-ｊ50
6
2014-03-01
TA4032FT
Package Dimensions
Unit: mm
Weight: 1.5 mg (Typ.)
7
2014-03-01
TA4032FT
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
8
2014-03-01