DIGIPASS SecureClick
User manual
®
DIGIPASS® SecureClick
Your DIGIPASS SecureClick authenticator is the most convenient way to protect
online accounts accessed via your PC or smartphone. It’s also FIDO U2F certified!
With cybercrime on the rise, the goal of the FIDO Alliance (Fast IDentity Online) is to
provide stronger online security for consumers that’s also incredibly simple to use.
HOW DOES THE DIGIPASS® SECURECLICK INCREASE SECURITY?
Static passwords are a pain to remember and easy targets for hackers. DIGIPASS
SecureClick leverages proven multi-factor authentication technology to protect your
online accounts at the push of a button. Simply login to your website protected with
FIDO U2F... Enter your password. Push the button on your DIGIPASS® SecureClick when
prompted. And Done! You’re logged in securely.
2
DIGIPASS® SECURECLICK MANUAL
DIGIPASS® BLUETOOTH BRIDGE
For PCs that do not support BLE, VASCO offers our DIGIPASS® Bluetooth Bridge in a
USB dongle. When you insert the dongle into the USB port of a computer, (effectively
pairing the DIGIPASS® SecureClick with the DIGIPASS® Bluetooth Bridge), you can use the
DIGIPASS® SecureClick like a FIDO U2F USB device.
FULLY PROTECTED CONNECTION
DIGIPASS® SecureClick establishes an encrypted communication between the DIGIPASS®
SecureClick and the BLE device (e.g. laptop, mobile device). As a result DIGIPASS®
SecureClick delivers the most secure and lightning fast user connectivity to protect even
the most sensitive mobile transactions.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Activate Bluetooth on
your mobile device
(or) insert the SecureClick Bluetooth Bridge
into an open port
Press the SecureClick
button for 3 seconds
to begin pairing with
your mobile device
When prompted, on
your mobile device,
enter code 000000.
SecureClick is now ready
to secure your logins
When visiting a FIDO
enabled website, register
your SecureClick device
by pressing the button
for 1 second
Authenticating
on FIDO enabled web
applications is just
another short press of
the button for 1 second
3
DIGIPASS® SECURECLICK MANUAL
EASY TO SERVICE POWER REQUIREMENTS
DIGIPASS® SecureClick is also equipped with a replaceable battery that’s easy to change.
When used up to 10 times a day, it can last over two years.
PLATFORMS SUPPORTING BLUETOOTH LOW ENERGY (BLE)
Computer OS: Windows 8.1 and higher - Mac OS X
Mobile OS: Android - iOS
PLATFORMS SUPPORTING FIDO U2F
FIDO U2F BLE: Android, will be available Q4 2016 - iOS, will be available Q4 2016
FIDO U2F USB: Chrome, v40 or newer - Firefox, will be available in 2016
4
DIGIPASS® SECURECLICK MANUAL
DIGIPASS® SECURECLICK COLOR CODES
5
Running blue
DIGIPASS® SecureClick is on but not connected to any device
Full red + running blue
DIGIPASS® SecureClick is in pairing mode
Solid green
Connected and will automatically approve the next authentication or registration
Solid yellow
Connected and will request the push of the button for the next authentication
or registration
Blinking yellow
Connected and waiting for the push of the button for authentication or
registration
Blinking red
Connected and waiting for the push of the button for pairing.
DIGIPASS® SECURECLICK MANUAL
HOW TO USE THE DIGIPASS® SECURECLICK?
If you are using the DIGIPASS® SecureClick alone, you need to use a platform that
supports:
• Bluetooth Low Energy (see platforms supporting BLE)
• FIDO U2F BLE (Not yet available, see platforms that will support FIDO U2F BLE)
General action to use your DIGIPASS SecureClick
• Step1: Activate Bluetooth on your mobile or connect your DIGIPASS Bluetooth Bridge
to a USB port of your computer,
• Step 2: Pair the DIGIPASS SecureClick to your host platform by a long press on the
DIGIPAS SecureClick.
• Step 3: Enter Default code is 00000 on your host platform. Now you are ready to Use
the DIGIPASS SecureClick the following operations can be repeat on all Fido enable
website.
• Step 4: Register the DIGIPASS SecureClick into any Fido enable website by a short
press on the DP SecureClick.
• Step 5: Easy and authenticate to all registered website by just a short press on the
DIGIPASS SecureClick
6
DIGIPASS® SECURECLICK MANUAL
To use the DIGIPASS® SecureClick, on a new platform, you need to turn on the
Bluetooth on your platform and follow your platform’s specifics steps for pairing a new
Bluetooth device. You also need to set your DIGIPASS® SecureClick in pairing mode by
pressing the button for three seconds. The DIGIPASS® SecureClick willl turn full red and
then running blue. Your platform will then ask you to enter a PIN. The default one is
‘00000’ (5 times 0).
To login to a FIDO U2F enabled website, you can now navigate and login to your
website protected with FIDO U2F. Enter and then you will be asked to push the button
on your FIDO U2F device. Push the button on your DIGIPASS® SecureClick. Done! You
are securely logged in.
DIGIPASS® BLUETOOTH BRIDGE COLOR CODES
7
Blinking yellow
Driver installation/ if drivers are already installed, driver check
Blinking blue
Scanning for DIGIPASS® SecureClick in range
Blinking green
Found a paired DIGIPASS® SecureClick
Green continuous
Connected with DIGIPASS® SecureClick and performing a
registration or an authentication
DIGIPASS® SECURECLICK MANUAL
DIGIPASS® SECURECLICK WITH THE DIGIPASS® BLUETOOTH BRIDGE
• Insert your DIGIPASS® Bluetooth Bridge in an available USB port on your computer
• If the DIGIPASS® Bluetooth Bridge is blinking yellow, please wait until it starts blinking blue.
• If you are using your DIGIPASS® SecureClick for the first time with this DIGIPASS®
Bluetooth Bridge, press the DIGIPASS® SecureClick button for three seconds, it
successively turns full red and running blue. Your device is in pairing mode. It then blinks
yellow, waiting for the push of the button. When you press the button, the pairing will
be done and the DIGIPASS® SecureClick will turn green to indicate the success of the
operation. The DIGIPASS® Bluetooth Bridge blinks green during the pairing operations
and then will go back to blinking blue when the pairing is done.
You can now navigate and login to your website protected with FIDO U2F. Simply login to
your website protected with FIDO U2F. Enter your user id and password. Push the button
on your DIGIPASS® SecureClick when prompted. And Done! You’re logged in securely.
8
DIGIPASS® SECURECLICK MANUAL
MANAGING MULTIPLE DIGIPASS® SECURECLICK
If you have multiple DIGIPASS® SecureClick devices, you will need to download and install
the DIGIPASS® SecureClick management application in order to manage the different
pairings of your device.
For futher support, please contact us on support@vasco.com.
9
DIGIPASS® SECURECLICK MANUAL
HOW TO REPLACE THE BATTERY OF YOUR DIGIPASS® SECURECLICK?
1. Remove accessories (ex. Key Ring)
2. Insert a small standard screwdriver
into the slot on the side of the device and
gently twist to remove the back cover
3. With the screwdriver, carefully push the
old battery out of the device
4. With the old battery removed, insert
a new CR2012 battery with the “+” side
aligned with the “+” on the back.
10
DIGIPASS® SECURECLICK MANUAL
5. When re-attaching the two sides of the device, carefully align the (3) slots on the side
and gently press to secure the two sides together.
11
DIGIPASS® SECURECLICK MANUAL
FCC STATEMENTS
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
IMPORTANT: No changes shall be made to the equipment
without the manufacturer’s permission as this may void the user’s authority to
operate the equipment.
This device complies with FCC requirements for RF exposure in accordance with FCC
rule part §2.1093 and KDB 447498 D01 for portable use conditions.
SPECIFIC INFORMATION FOR THE BATTERY TREATMENT & RECYCLING FACILITIES
This product contains (a) battery(ies), and a printed circuit board (pcb) that may
require special handling at end-of-life.
12
DIGIPASS® SECURECLICK MANUAL