Resistors
Surface
Mount QSOP
Resistor
Networks
Surface
Mount QSOP
Surface Mount
QSOP
Resistor
Networks
Make Possible
Resistor Networks
QSOP Series
•
•
•
•
•
Reliable,QSOP
no internal
Seriescavity
High resistor density - .025" lead spacing
JEDEC
Reliable,
internal
StandardQSOP
16,no
20,
and 24cavity
pin packages
Series
®
High
resistor
density
.025” lead
spacing
Ultra-stable
TaNSil
resistors
on
silicon
substrate
• Reliable, no internal cavity
RoHS compliant
and JEDEC
Sn/Pb
terminations
Standard
20, lead
and spacing
24available
pin packages
• High
resistor
density16,
- .025"
• Standard
JEDEC
16, 20,resistors
and 24 pinon
packages
Ultra-stable
TaNSil®
silicon substrate
• Ultra-stable TaNSil® resistors on silicon substrate
RoHS compliant and Sn/Pb terminations available
• RoHS compliant and Sn/Pb terminations available
Pb-freevolume
parts complyapplications
with EU Directive 2011/65/EU
(RoHS2) a
IRC’s TaNSil® QSOP resistor networks are the perfect solution forAllhigh
that demand
small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component
QSOPand
resistor
are the perfect solution for high volume applications that demand a
IRC’s
TaNSil® cost,
count, lower
resistor
highnetworks
reliability.
small wiring board footprint. The 0.025" lead spacing provides higher lead density, increased component
The tantalum
film system
on high
silicon
provides precision tolerance, exceptional TCR tracking, low cost
count,nitride
lower resistor
cost, and
reliability.
and miniature
package. Excellent
performance in harsh, humid environments is a trademark of IRC’s
The tantalum nitride
film system on silicon provides precision tolerance, exceptional TCR tracking, low cost
®
resistor
film.
self-passivating
TaNSil
and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s
self-passivating TaNSil resistor film.
The QSOP
series is ideally suited for the latest surface mount assembly techniques and each lead can be
The
series isThe
ideally
suited forgull
the latest
mount assembly
each
lead can bestresses
100% visuallyQSOP
inspected.
compliant
wing surface
leads relieve
thermaltechniques
expansionand
and
contraction
100%
visually
inspected.
The
compliant
gull
wing
leads
relieve
thermal
expansion
and
contraction
stresses
created by soldering and temperature excursions.
®
created by soldering and temperature excursions.
For applications
requiring high performance resistor networks in a low cost, surface mount package, specify
For applications requiring high performance resistor networks in a low cost, surface mount package, specify
IRC QSOP
networks.
IRCresistor
QSOP resistor
networks.
Electrical
Electrical
DataData
Environmental Data
Environmental
Data
Resistance Range
10 to 250KΩ
Resistance Range
10 to 250KΩ
Absolute Tolerance
To ±0.1%
Absolute Tolerance
Ratio Tolerance to R1
To ±0.05%
To ±0.05%
Absolute TCR
To ±25ppm/°C
To ±25ppm/°C
Tracking TCR
To ±5ppm/°C
Element Power Rating @ 70°C
Tracking TCR
To ±5ppm/°C
100mW
Isolated Schematic
Element Power Rating @ 70°C
Bussed Schematic
Isolated Schematic
Package Power Rating @ 70°C
Rated Operating Voltage
(not to exceed √ P x R)
50mW
100mW750mW
16-Pin
16-Pin
750mW
Volts
20-Pin 1001.0W
24-Pin
1.0W
-55°C to +125°C
Operating Temperature
Rated Operating______
Voltage
100 Volts
(not to exceed
Noise√ P x R)
Operating Temperature
<-30dB
Thermal Shock
Power Conditioning
Power Conditioning
High Temperature Exposure
High Temperature Exposure
Short-time Overload
IRC reserves Note
the right to make changes in product specification without notice or liability.
General
Short-time Overload
Low Temperature Storage
Low
Life Temperature Storage
All information is subject to IRC’s own data and is considered accurate at time of going to print.
Life
TT Electronics reserves the right to make changes in product specification
without notice or liability.
<-30dB
• Corpus
USA
© IRC
Advanced
FilmtoDivision
All
information
is subject
TT Electronics’
ownChristi
dataTexas
and78411
is considered
accurate at time of going to print.
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
© TT Electronics plc
General Note
Delta R
±0.02%
R
±0.1%
±0.02%
±0.03%
±0.1%
±0.1%
±0.03%
±0.03%
±0.1%
±0.05%
±0.03%
±0.02%
±0.05%
±0.05%
±0.02%
±0.03%
±0.05%
±0.05%
±0.03% ±2.0% ±0.05%
±0.05%
-55°C to +125°C
General Note
Noise
Thermal Shock
Typical
Max Delta
DeltaTypical
R
R Max Delta
20-Pin
50mW 1.0W
24-Pin
1.0W
Bussed Schematic
______
Package Power Rating @
70°C
MIL-PRF-83401
To ±0.1%
Ratio Tolerance to R1
Absolute TCR
Test Per
Test Per
MIL-PRF-83401
RC reserves the right to make changes in product specification without notice or liability.
±0.05%
±2.0%
A subsidiary of
TT electronics plc
www.ttelectronicsresistors.com
QSOP Series
Issue January 2009 Sheet 1 of 4
07.14
Surface Mount QSOP
Resistor Networks
Surface Mount QSOP
QSOP Series
Resistor
Networks
Make Possible
Manufacturing Capability Data
ISOLATED SCHEMATIC A
Absolute
TCR
(ppm/°C)
BUSSED SCHEMATIC B
Ohmic
Range
(Ω)
Available
Tolerances
Available
Ratio
Tolerances
Best
Tracking
(±ppm/°C)
Ohmic
Range
(Ω)
Available
Tolerances
Available
Ratio
Tolerances
Best
Tracking
(±ppm/°C)
10-25
FGJ
FG
100
10-25
FGJ
FG
200
26-50
DFGJ
CDFG
50
26-50
FGJ
DFG
100
51-200
CDFGJ
CDFG
10
51-100
DFGJ
CDFG
50
201-250K
BCDFGJ
ABCDFG
5
101-200
DFGJ
BCDFG
25
201-500
BCDFGJ
BCDFG
20
501-100K
BCDFGJ
ABCDFG
5
250
100
50
26-50
DFGJ
CDFG
50
26-50
FGJ
DFG
100
51-200
CDFGJ
CDFG
5
51-100
DFGJ
CDFG
50
201-250K
BCDFGJ
ABFG
5
101-200
DFGJ
BCDFG
25
201-500
BCDFGJ
BCDFG
20
501-100K
BCDFGJ
ABCDFG
5
26-50
DFGJ
CDFG
50
51-100
DFGJ
CDFG
50
51-200
CDFGJ
CDFG
10
101-200
DFGJ
BCDFG
25
201-250K
BCDFGJ
ABFG
5
201-500
BCDFGJ
BCDFG
20
501-100K
BCDFGJ
ABCDFG
5
51-200
CDFGJ
CDFG
10
201-500
BCDFGJ
BCDFG
20
201-250K
BCDFGJ
ABFG
5
501-100K
BCDFGJ
ABCDFG
5
25
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
QSOP Series Issue January 2009 Sheet 2 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
07.14
Surface Mount QSOP
Resistor Networks
Surface Mount QSOP
QSOP Series
Resistor
Networks
Make Possible
Physical Data
# OF PINS
DIMENSION "D"
ZD REF
16
0.193″ ±0.004
0.009″
20
0.341″ ±0.004
0.058″
24
0.341″ ±0.004
0.033″
Note: N = number of pins (16, 20, 24)
Note: Lead Coplanarity 0.004" Max.
Note: All dimesions exclude mold flash and
end flash which shall not exceed 0.006" per side.
Drawing proportions not to scale.
Schematic Data
Power Derating Curve
N
R1
2
3
Schematic A
Isolated
N
% Of Rated Power
100
1
R1
50
10
1
2
3
Schematic B
Bussed
25°
70°
125°
Temperature in °C
Note: N = number of pins (16, 20, 24)
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
QSOP Series Issue January 2009 Sheet 3 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
07.14
Surface Mount QSOP
Resistor Networks
Surface Mount QSOP
QSOP Series
Resistor
Networks
Make Possible
Ordering Data
Prefix
GUS - QS8A - 01 - 1002 - F
B
Style, Schematic and Termination
QS8A = 16-pin, 8 Isolated Resistors, with standard Sn/Pb terminations
QS8ALF = 16-pin, 8 Isolated Resistors, with 100% matte tin, Pb-free terminations
QS8B = 16-pin, 15 Bussed Resistors, with standard Sn/Pb terminations
QS8BLF = 16-pin, 15 Bussed Resistors, with 100% matte tin, Pb-free terminations
QS0A = 20-pin, 10 Isolated Resistors, with standard Sn/Pb terminations
QS0ALF = 20-pin, 10 Isolated Resistors, with 100% matte tin, Pb-free terminations
QS0B = 20-pin, 19 Bussed Resistors, with standard Sn/Pb terminations
QS0BLF = 20-pin, 19 Bussed Resistors, with 100% matte tin, Pb-free terminations
QSCA = 24-pin, 12 Isolated Resistors, with standard Sn/Pb terminations
QSCALF = 24-pin, 12 Isolated Resistors, with 100% matte tin, Pb-free terminations
QSCB = 24-pin, 23 Bussed Resistors, with standard Sn/Pb terminations
QSCBLF = 24-pin, 23 Bussed Resistors, with 100% matte tin, Pb-free terminations
Absolute TCR Code
00 = ±250 ppm/°C; 01 = ±100 ppm/°C; 02 = ±50 ppm/°C; 03 = ±25 ppm/°C
Resistance Code
4-Digit Resistance Code
Ex: 1002 = 10KΩ, 50R1 = 50.1Ω
Absolute Tolerance Code
J = ±5%; G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%
Ratio Tolerance Code (optional)
G = ±2%; F = ±1%; D = ±0.5%; C = ±0.25%; B = ±0.1%; A = ±0.05%
Packaging
Specify tubes or tape & reel.
For additional information or to discuss your specific requirements,
please contact our Applications Team using the contact details below.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
QSOP Series Issue January 2009 Sheet 4 of 4
General Note
TT Electronics reserves the right to make changes in product specification without notice or liability.
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.
www.ttelectronicsresistors.com
© TT Electronics plc
07.14