PLASTER RINGS
SPECIFICATION
ALL LAMP TYPES SG SQUARE
FEATURES
• Plaster rings used with the
Spectrum Gold Square (SG SQ)
series are factory installed.
SQPR*
FEATURES
• Fixture optics are lowered to
compensate for the added
ceiling depth.
• The rings are used when the
ceiling is deeper than 1", and
provide a guide for reflector
installation and plastering during
construction.
VENTILATION HOLES
(TYPICAL)
VENTILATION HOLES
(TYPICAL)
EXTERIOR FINISHED
MATTE BLACK
EXTERIOR FINISHED
MATTE BLACK
6” SQUARE APERTURESTANDARD CEILING DEPTH
• Standard depths are 1.0, 1.5,
2.0, 2.5 and 3.0 inches. Other
depths may be ordered, consult
the factory.
6” SQUARE APERTUREWITH 1.5” PLASTER RING
OPTICS
LOWERED
1.5 PLASTER
RING
25 /15.9 mm
APPLICATIONS:
PLASTER RING
INSTALLED AT FACTORY
• Deep Ceiling Applications.
• Added Support for square
trims in irregular ceilings
.
ORDERING PLASTER RINGS"
SQPR1.0
SQPR1.5
SQPR2.0
SQPR2.5
SQPR3.0
SQPR*
Dimensions shown are nominal. Spectrum Lighting is
continually improving products and reserves the right
to make changes that will not alter performance or
appearance.
1" DEEP PLASTER RING
1 1/2" DEEP PLASTER RING
2" DEEP PLASTER RING
2 1/2" DEEP PLASTER RING
3" DEEP PLASTER RING
*Custom Depth- call Factory
SPECIFYING PLASTER RINGS-SG SERIES
MODEL
Select
SG SQ
Square
fixture
series
LAMPS
Choose
Lamp
Wattage(s)
EXAMPLE: SGD6SQMH
70
BALLAST
Specify
Ballast
(if required)
see
Individual
Pages
EX/
LAMPS
ELECTRICAL
Choose
Lamp
Type
Specify
Circuits, Fusing
(if required)
see
Individual Pages
PAR30
FS
OPTIONS
REFLECTOR
Choose the
Choose Options
from catalog page Reflector and
Finish
specify:
SQPR1.0-1" Deep
SQPR1.5-1 1/2" Deep
SQPR2.0- 2" Deep
SQPR2.5- 2 1/2" Deep
SQPR3.0- 3" Deep
SQPR*- * Custom
DepthConsult
Factory
/SQPR2.0
/AR0606SG
www.speclight.com 994 Jefferson Street . Fall River, MA 02721 . 508.678.2303 FAX 508.678.2260
1-430-B