CURRICULUM VITAE
(Dr. Hui Jiao)
Qualifications
PhD
Structural Engineering, Monash University, May 2004
ME
Structural Engineering, Dalian University of Technology, China, 1990
BE.
Civil Engineering, Dalian University of Technology, China, 1987
GradCert
Information Technology, Swinburne University of Technology, 2002
Professional Membership
Member, Institution of Engineers Australia, CPEng, NPER (Structural)
Member, Australian Steel Institute (ASI)
Member, IIFC (International Institute for FRP in Construction)
Member, Australasian Association for Engineering Education (AAEE)
Appointments
2009 - current
2008 - 2009
2003 - 2008
2000 - 2003
1993- 1999
1990 - 1993
Lecturer, School of Engineering, University of Tasmania
Senior Engineer, Exallos Division, RobertBird Group, Melbourne
Research fellow, Maintenance Technology Institute, Monash University
PhD candidate, Monash University
Engineer, LN Building Construction Corporation, China
Engineer, Shenyang Civil Building Design Institute, China
Research Grants:
1. New Appointees Research Grant Scheme (NARGS) - University of Tasmania (2009) - $5000, Project Title:
Fatigue Behaviour of CFRP Strengthened Steel Members
2. Consultancy - Department of Infrastructure, Energy and Resources (2009) - $4000, Project Title: Failure
Analysis and Assessment of Rails
3. Institutional Research Scheme (IRGS) – University of Tasmania (2010) - $10500: Project Title: Fatigue
Behaviour of Fillet Welded Very High Strength Steel Connections
4. Teaching Development Grant - University of Tasmania (2011) - $7650: Project Title: Developing an Online
Assessment System to Provide Distinctive Learning Experience for Engineering Undergraduate Students
5. UTAS conference support (2012) - $600 : The 6th International Composites Conference (ACUN-6)
Teaching:
Subjects developed and taught at UTAS:
1. KNE315 Steel and Timber Structures
2. KNE316 Concrete Structures
3. KNE113 Engineering Statics
4. KNE216 Civil Engineering 1
5. KNE210 Materials and Manufacturing
6. KNE352 Dynamic Systems
Awards
2012
2011
2011
2010
2003
1987
Vice Chancellor’s Citation Award for outstanding contribution to student learning, UTAS
Dean's Early Career Research Award, Faculty of Science, Engineering and Technology, UTAS
UTAS Teaching Merit Certificate
UTAS Teaching Merit Certificate
Postgraduate Publication Award, Monash University
University Excellence Award, Dalian University of Technology
CV of Dr. Hui Jiao
1/5
Reviewer for Journals
Advance in Structural Engineering (SCI)
International Journal of Structural Stability and Dynamics (SCI)
International Journal of Steel Structures (SCI)
Higher Education Research & Development
Reviewer for Conferences
The 6th International Composites Conference (ACUN-6), Melbourne, 2012
2012 Australasian Association for Engineering Education (AAEE) Annual Conference
University Administration
Chairman, Laboratory Committee, School of Engineering, UTAS
List of Publications
Refereed Journal Papers
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
Jiao, H. (2012). Metallurgical investigation of a low rail in a curved railway track subject to long term
rail-wheel interactive wear. Australian Journal of Civil Engineering, Submitted in July 2012
Jiao, H., Mashiri, F. Zhao, X.L. (2012). Fatigue Behaviour of Very High Strength (VHS) Circular Steel
Tube to Plate T-joints under In-plane Bending. Thin-walled Structures, under review, submitted on the 5 th
February 2012.
Jiao, H., Mashiri, F. Zhao, X.L. (2012). A comparative study on fatigue behaviour of steel beams
retrofitted with welding, pultruded CFRP plates and wet layup CFRP sheets. Thin-walled Structures, 55,
p.144-152
Mashiri, FR, Joshi, S, Pang, NL, Dayawansa, DP, Zhao, XL, Chitty, G, Jiao, H and Price, JWH (2011)
Service loads in dragline tubular structures: a case study of cluster A5, Structural Control and Health
Monitoring, Online EJ ISSN 1545-2263
Jiao, H. and Zhao, X.L. (2004): CFRP Strengthened Butt-welded Very High Strength (VHS) Circular
Steel Tubes. Thin-Walled Structures. 42(7): p. 963-978.
Jiao, H. and Zhao, X.L. (2004): Section Slenderness Limits of Very High Strength Circular Steel Tubes
in Bending. Thin-Walled Structures. 42: p. 1257-1271.
Jiao, H. and Zhao, X.L. (2004): Tension Capacity of Very High Strength (VHS) Circular Steel Tubes
After Welding. Advances in Structural Engineering-An International Journal. 7(4): p. 285-296.
Jiao, H. and Zhao, X.L. (2002): Imperfection, Residual Stress and Yield Slenderness Limit of Very High
Strength (VHS) Circular Steel Tubes. Journal of Constructional Steel Research. 59(2): p. 233-249.
Jiao, H. and Zhao, X.L. (2001): Material Ductility of Very High Strength (VHS) Circular Steel Tubes In
Tension. Thin-Walled Structures. 39(11): p. 887-906.
Jiao, H. and Li, X.L. (1996): Competitive Tendering for International Civil Engineering Projects .
Engineering Budgets and Costs (In Chinese), (2): p. 26-27.
Refereed Conference Papers
1.
2.
3.
Jiao, H., Phan, H.B., Zhao, X.L. (2012). Fatigue testing of defected steel beans strengthened with
sandwich layered of high and normal modulus CFRP sheets. ACUN6 –Composites and Nanocomposites in
Civil, Offshore and Mining Infrastructure. Melbourne 14 – 16 November 2012. Accepted.
Jiao, H. and Brown, N. (2012). Providing the right feedback to the right students: applying an innovative
e-Assessment system in engineering education. In 2012 Australasian Association for Engineering
Education (AAEE) Annual Conference, 3rd - 5th December 2012, Melbourne, Australia. Accepted.
Lou, X. F., Zhou, T., Hao, Z. Y., Jiao, H. and Cheng, L. (2012). Experimental study on wake flow of an
inclined square cylinder. In Proceedings of the Twenty-second International Offshore and Polar
Engineering Conference, Rhodes, Greece, June 17–22, 2012.(pp. 630-637)
CV of Dr. Hui Jiao
2/5
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Jiao, H., Zhao, X.L., Mashiri, F. (2012). Improving Fatigue Performance of CFRP Strengthened Steel
Beams by Applying Vacuum Pressure in the Wet Layup of CFRP Woven Sheets. The 3rd Asia-Pacific
Conference on FRP Structures, February 2-4, 2012, Sapporo, Japan. PP. F2B03.
Jiao, H., Mashiri, F., Xiao, Z., Imms, D. (2011). A feasibility study on mechanical connections of very
high strength (VHS) circular Steel tubes. The 6th International Symposium on Steel Structures, November
3-5, 2011, Seoul, Korea, PP.804-809.
Jiao, H., Mashiri, F., Zhou, T. (2011). Using e-tutor program and pre-lab assessment task to enhance
laboratory experience of civil engineering students. The 22nd Annual Conference for the Australasian
Association for Engineering Education, Perth, 5-7 December 2011, PP. 633-638
Jiao, H. (2010). Developing computer assisted assessment program for civil engineering courses. The
21st Annual Conference for the Australasian Association for Engineering Education, Sydney, 5-8
December 2010, PP. 328-333.
Jiao, H. (2010). Fatigue Behaviour of CFRP strengthened steel members under pure bending. The 4th
international conference on steel & composite structures, Sydney, 21-23 July 2010, PP. 809-814.
Mashiri, F. R. and Jiao, H. (2010). Communication in Engineering Studies - Review and Case Study. The
21st Annual Conference for the Australasian Association for Engineering Education , Sydney, 5-8
December 2010, PP. 244-249.
Jiao, H. and Zhao, X.L. (2008): Simulation of CFRP Strengthened Butt-welded Very High Strength
(VHS) Circular Steel Tubes in Tension. 12th International Symposium on Tubular Structures (ISTS12).
Shanghai. PP. 571-576.
Mashiri, F.R., Zhao, X.L., Pang, D., Dayawansa, P., Jiao, H., and Price, J. (2007): Service Stresses and
Implications for Fatigue Strength in Dragline Tubular Structures. in Proceedings of The 5th International
Conference onAdvances in Steel Structures. Singapore. pp. 985-990.
Mashiri, F.R., Zhao, X.L., Pang, D., Dayawansa, P., Jiao, H., Chitty, G., and Price, J. (2007):
Understanding Service Stresses in Dragline Tubular Structures. in Proceedings of the 4th International
Structural Engineering and Construction Conference (ISEC-4), September 26-28, 2007. Melbourne,
Australia. pp. 167-172.
Mashiri, F.R., Pang, D., Dayawansa, P., Zhao, X.L., Chitty, G., Jiao, H., and Price, J. (2005): Site
Testing of Dragline Tubular Structures. in Proceedings of The 1st International Conference on Advances
in Experimental Structural Engineering (AESE 2005). Nagoya, Japan. pp. 619-626.
Zhao, X.L. and Jiao, H. (2004): Recent Research and Development in Thin-Walled High Strength Tubes.
in International Workshop on Recent Advances and Trends in Thin-Walled Structures Technology.
Loughborough, UK.
Jiao, H. and Zhao, X.L. (2003): Tests of Very High Strength (VHS) Circular Steel Tubes in Bending. in
Advances in structures, ASSCCA’03. Sydney, Australia: A.A. Balkema Publishers. pp. 157-161.
Jiao, H. and Zhao, X.L. (2002): Strengthening Tests of Butt-Welded Very High Strength (VHS) Circular
Steel Tubes. in IABSE Symposium (The International Association for Bridge and Structural Engineering) .
11-13 September, Melbourne, Australia. pp. 49-56.
Jiao, H. and Zhao, X.L. (2002): Design of butt welds and transverse fillet welds in very high strength
(VHS) circular steel tubes. in 17th Australian Conference on the Mechanics of Structures and
Materials. Gold Coast, Queensland, Australia. pp. 583-587.
Jiao, H. and Zhao, X.L. (2002): Shear Band Orientation of Very High Strength (VHS) Circular Steel
Tubes. in The Third Australasian Congress on Applied Mechanics. Sydney, Australia. pp. 539-544.
Jiao, H. and Zhao, X.L. (2001): Strength of Butt Welds and Transverse Fillet Welds in Very High
Strength (VHS) Circular Steel Tubes. in The Six Pacific Steel Structure Conference. Beijing, China, pp.
775-780.
Zhao, G., Jiao, H., and Xu, S. (1991): Study of Fracture Toughness and Fracture E nergy by Means of
Wedge Splitting Test Specimen. Proceeding of the Third International Symposium on Brittle Matrix
Composites. Warsaw, Poland: Elsevier Science Pub Ltd. pp. 62-71.
Research Reports:
1.
2.
Jiao, H. (2008): Structural Stability of Melbourne Rectangular Stadium Roof Members during
Construction.
Jiao, H. (2008): Melbourne Rectangular Stadium Roof Propping Plan (Stage 1 to 8) .
CV of Dr. Hui Jiao
3/5
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
Chitty, G., Jiao, H., and Amaratunga, P. (2008): Feasibility of Operating the CAT 793C Truck Chassis
up to 100,000 hours at Kalgoorlie Consolidated Gold Mines (KCGM).
Chitty, G. and Jiao, H. (2007): Structural Integrity Monitoring and Real-time Operator Feedback System
for Draglines at Norwich Park Mine.
Chitty, G., Hon, A., Cassidy, G., Amaratunga, P., Jiao, H., Carpinteri, T., and Cortes, O. (2007):
Structural Capacity of the Marion 8750 Dragline at Navojo Mine.
Chitty, G., Hon, A., Amaratunga, P., Jiao, H., Carpinteri, T., and Cortes, O. (2007): Structural Capacity
of the Marion 8050 Dragline at Navojo Mine.
Chitty, G., Kerezsi, B., Hon, A., Amaratunga, P., Jiao, H., Bartosiewicz, H., and Randall, S. (2006):
Structural Capacity of the Marion 8750 Dragline at Callide Mine.
Chitty, G., Hon, A., Amaratunga, P., Jiao, H., Carpinteri, T., and Cortes, O. (2006): Structural Capacity
of the Marion 8200 Dragline at Power River Coal - North Antelope Rochelle Mine.
Chitty, G., Hon, A., Jiao, H., Amaratunga, P., Cassity, G., Bartosiewicz, H., and Cortes, O., Structural
Capacity of the P&H9020 Dragline at Bengalla Mine. 2006.
Chitty, G., Hon, A., Jiao, H., Amaratunga, P., Cassity, G., Bartosiewicz, H., and Cortes, O., Structural
Capacity of Marion 8200 Dragline (DL5) at Moura Mine. 2006.
Chitty, G., Hon, A., Jiao, H., Amaratunga, P., Cassity, G., Bartosiewicz, H., and Cortes, O., Structural
Capacity of the DL6 Dragline at Moura Mine. 2006.
Chitty, G., Hon, A., Jiao, H., Kerezsi, B., Rucinski, T., Cortes, O., and Randall, S., Structural Capacity
of The DRE07 Dragline at Peak Downs Mine. 2006.
Chitty, G., Lee, K., Cassidy, G., Jiao, H., Bartosiewicz, H., Rucinski, T., Cortes, O., and Hon, A.,
Structural Capacity of The Marion 8200 Dragline DRE38 AT Blackwater Mine. 2006.
Chitty, G., Hon, A., Amaratunga, P., Carpinteri, T., Jiao, H., Rucinski, T., and Cortes, O. (2006):
Structural Capacity of The Marion 8200 Dragline (DL101) at Mount Thorley Mine .
Chitty, G., Hon, A., Amaratunga, P., Jiao, H., Rucinski, T., and Cortes, O., Structural Capacity of The
BE1370 Dragline (DL102) at Mount Thorley Mine. 2006.
Chitty, G., Lee, K., Amaratunga, P., Carpinteri, T., Jiao, H., Hon, A., Rucinski, T., and Cortes, O.,
Structural Capacity of The P&H 9020 Dragline (DL103) at Mount Thorley Mine. 2006.
Chitty, G., Hon, A., Cassidy, G., Amaratunga, P., Jiao, H., Bartosiewicz, H., and Cortes, O. (2005):
Structural Capacity of Marion 8750 Dragline (DL304) at Curragh Mine.
Chitty, G., Kerezsi, B., Amaratunga, P., Jiao, H., Dayawansa, D., Cassity, G., Bartosiewicz, H., and
Cortes, O. (2005): Risk Management Strategy For Managing Structural Integrity of the ST1 Stater at
Dalrymple Bay Coal Terminal.
Chitty, G., Hon, A., Jiao, H., Amaratunga, P., Cassity, G., Bartosiewicz, H., and Cortes, O. (2005):
Structural Capacity of the DL4 Dragline at Moura Mine.
Chitty, G., Hon, A., Dayawansa, D., and Jiao, H. (2005): Structural Capacity of the DRE22 Dragline at
Saraji Mine.
Chitty, G., Hon, A., Dayawansa, D., and Jiao, H. (2005): Structural Capacity of the DRE23 Dragline at
Peak Downs Mine.
Chitty, G., Hon, A., Jiao, H., Cassidy, G., and Amaratunga, P. (2005): Structural Capacity of the Be1370
Dragline at Blair Athol Coal.
Chitty, G., Hon, A., Cassidy, G., Jiao, H., and Dayawansa, D. (2005): Structural Capacity of DRE25
Dragline at Blackwater Mine.
Chitty, G., Hon, A., Smith, A., Jiao, H., and Dayawansa, D. (2005): Structural Capacity of the DRE05
and DRE06 Draglines at Goonyella/Riverside Mine.
Chitty, G., Lee, K., Hon, A., Cassidy, G., Amaratunga, P., Jiao, H., Dayawansa, D., Bartosiewicz, H.,
and Cortes, O. (2005): Structural Capacity of DRE27/DRE28/DRE29 MARION 8050 Draglines at
GOONYELLA/RIVERSIDE and South Walker Creek Mines.
Chitty, G., Hon, A., Jiao, H., Dayawansa, D., Kerezsi, B., Smith, A., and Bartosiewicz, H. (2004):
Structural Capacity of Marion 8200 Dragline at Coppabella Mine.
Chitty, G., Hon, A., Jiao, H., Dayawansa, D., Amaratunga, P., Cassidy, G., and Bartosiewicz, H. (2004):
Structural Capacity of DRE09 Dragline at Peak Downs Mine.
Chitty, G., Hon, A., Cassidy, G., Jiao, H., and Dayawansa, D. (2004): Structural Capacity of DRE24
Dragline at Gregory Mine.
Chitty, G., Hon, A., Jiao, H., Dayawansa, D., Amaratunga, P., Kerezsi, B., Mashiri, F., Cassity, G.,
Bartosiewicz, H., and Cortes, O. (2004): Risk Management Strategy For Managing Structural Integrity of
the Shiploader SL1 at Dalrymple Bay Coal Terminal.
Chitty, G., Dayawansa, D., Jiao, H., Smith, A., Amaratunga, P., Cassidy, G., and Bartosiewicz, H.
(2004): Structural Performance of UDD Draglines DRE22 and DRE23 at BMA Operations
CV of Dr. Hui Jiao
4/5