General Aviation Airport Lighting Products Illuminating the Way General Aviation and Airport Lighting Products Runway and Taxiway Elevated Lights Contents Medium Intensity Elevated Lights PAGE 1 Omnidirectional Taxiway Edge Light-LED 2 Airside™ Guidance Signs 3 Precision Approach Path Indicator 4 Wind Cone 5 This brochure provides quick access to new product and renewal parts ordering. It targets the Crouse-Hinds products most used on General Aviation (GA) Airfields. Approach & Navigational Aids The products included represent a subset of the complete Crouse-Hinds catalog of Airport Lighting. Should you not see what you are looking for, please call: 1-860-683-4300. You can download specific sections or the complete Airport Lighting Catalog at www.crouse-hinds.com/airportlighting Guidance Signs APRON EATON Z X Y Z Z X Z W Z W Z X Z 19-01 6 5 4 Z Y 3 2 Z 19-01 Z 01-19 Z Z 01-19 Z 19 CAT III Z Z 19 CAT III 1 2 APRON Originally created to meet the needs of the Aviation industry Crouse-Hinds Airport lighting has grown into an industry leading global manufacturer of airfield lighting. Our fixtures are operating night and day all over the world. CHALP products are requested by airports worldwide because our fixtures have performed dependably in the most challenging environments for decades. Crouse-Hinds builds quality and performance into every product. We work with both the Federal Aviation Administration and the International Civil Aeronautics Organization providing the best possible product to the aviation community. Medium Intensity Elevated Lights - L861, L861T and L861E 1 2 4 5 6 7 3 8 9 409 – – – Fixture Type: 38=Quartz/Bi-Pin 39=Incandescent/Medium Prefocus Color: C=Clear R=Red Y=Yellow G=Green Lamp Wattage: 30=30 watt lamp 40=40 watt lamp 10 – Options: MC2=Metal Frangible Coupling 2 Inch Height in Inches: 14=Standard height 14 inches B = Blue X = Opaque/Blank 45=45 watt lamp 69=69 watt lamp Available in 2 inch increments to 30 inches. 100=100 watt lamp 116=116 watt lamp Renewal Parts Parts L861 Lens 4-3/8˝ OD x 5-7/64˝ OL Lamps Sockets Support Hardware Support Heads Extension/Riser Frangible Coupling Lead Assembly Callout 1 2 3 Description Part Number L861 lens/globe CLEAR ML5411 L861 lens/globe BLUE ML331 L861 lens/globe RED ML2075 L861 lens/globe YELLOW FL6477 L861 lens/globe GREEN ML2572 L861 lens/globe CLEAR/RED ML5571 L861 lens/globe CLEAR/YELLOW ML5412 L861 lens/globe GREEN/RED ML5413 Tungsten Halogen Bi-Pin 45W/6.6A 40732 Incandescent 45W/6.6A 10047-1497 Tungsten Halogen Bi-Pin 30W/6.6A 40737 Socket Quartz/Bi-Pin 40749 Socket Incandescent Pre Focused KL6168 Socket Incandescent Medium Screw 10047-1559 4 Socket Mounting bracket 40937 5 Clamp band 50107 6 O-ring seal 10035-37 Head/Globe support assembly Quartz/Bi-Pin 50034* Head/Globe support assembly Pre focus 50035* Head/Globe support assembly Quartz/Bi-Pin 19˝ leads 50034-1* Head/Globe support assembly Pre focus 19˝ leads 50035-1* Head/Globe support assembly Quartz/Bi-Pin 29˝ leads 50034-2* 7 8 9 10 Head/Globe support assembly Pre focus 29˝ leads 50035-2* 1" EMT Extension/riser 14˝ 40878-2P 1" EMT Extension/riser 24˝ 40878-7P 1" EMT Extension/riser 30˝ 40878-10P Frangible coupling - Aluminum 1.5 Inch 50186 Frangible coupling - Aluminum 2 Inch 50184 Lead Assembly 14˝ Quartz Bi-pin 40918 Lead Assembly 24˝-30˝ Quartz Bi-pin 40918-7 Lead Assembly 14˝ Incandescent FL3621 Lead Assembly 24˝-30˝ Incandescent FL1012A Accessories Shipping Weight Shipping Volume Description Part Number lb. kg. cu.ft. cu.m. Base L-867, class I, 24˝ deep Baseplate, 1.5˝ Hub, Painted Steel Baseplate, 2˝ Hub, Painted Steel Connector Kit L-823, 8 AWG, 0.32˝ to 0.43˝ O.D. Junction Box & Cover Stake Assembly, 1.5˝ HUB Stake Assembly, 2˝ HUB Transformer L-830-1, 6.6/6.6A Transformer L-830-2, 20/6.6A AC21242H200301 AP1935 AP1932 823KP-D4-D4 AW7609/AW7805 AW2205 AW2202 TA045666-10 TA045265-10 52 8 8 23.6 3.6 3.6 2.6 0.14 0.14 0.074 0.004 0.004 12 8 8 8 8 5.4 3.6 3.6 3.6 3.6 0.2 0.2 0.2 0.2 0.2 0.006 0.006 0.006 0.006 0.006 EATON 3 Omnidirectional Taxiway Edge Light-LED - L861 8615 – T 5 – B – 066 – – Fixture Type: 8615=FAA L-861, 5 LED Options: 1=Arctic Kit 2=2˝ NPS Aluminum Frangible Coupling 4=No Stainless Steel Band Type: T5=Taxiway Beam Color: B=Blue Height ( Inches): 14=14 inches Standard 18=18 inches 22=22 inches 24=24 inches 30=30 inches (Maximum) Input Power: 066=6.6A Constant Current Accessories Shipping Weight Shipping Volume Description Part Number lb. kg. cu.ft. cu.m. Base L-867, Class I, 24˝ Deep Baseplate, 1.5˝ Hub, Painted Steel Baseplate, 2˝ Hub, Painted Steel Connector Kit L-823, 8 AWG, 0.32˝ to 0.43˝ O.D.* Leveling Device Stake Assembly, 1.5˝ HUB Stake Assembly, 2˝ HUB Transformer L-830-1, 6.6/6.6A - 10/15w Transformer L-830-1, 6.6/6.6A - 30/45w AC21242H200301 AP1935 AP1932 823KP-D4-D4 50400 AW2205 AW2202 TA010665-10 TA045666-10 52 8 8 23.6 3.6 3.6 2.60 0.14 0.14 0.074 0.004 0.004 8 8 3.6 3.6 0.2 0.2 0.006 0.006 8 3.6 0.2 0.006 Renewal Parts Description Part Number 1˝ EMT Extension (14˝) 1˝ EMT Extension (18˝) 1˝ EMT Extension (24˝) 1˝ EMT Extension (30˝) Blue Globe - Glass* Frangible Coupling – Aluminum 1.5 Inch Frangible Coupling – Aluminum 2 Inch Globe Support Assembly Globe/Heatsink Assembly with LED & Arctic Kit (Lens, LED, Heatsink, Globe with Heater) (Blue) Heatsink Assembly with LED (Lens, LED, Heatsink) (Blue) *Non Arctic Kit model only 4 EATON 40878-13P 40878-14P 40878-15P 40878-16P 50380 50186 50184 50390 50527 50430 Description Lead Assembly 14 inch Lead Assembly 20 inch Lead Assembly 26 inch LED Power Supply – Arctic/Heater LED Power Supply – Non-Arctic/No Heater O-Ring Seal S.S. T-Band Sealing Boot Thermal Tape for Housing/Heatsink Part Number 50398-2 50398-3 50398-4 50578 50577 10035-63-230 10037-883 50388 50396 Airside™ Guidance Signs Y,R,L,B - L858 858 – – – Options: 10=Unenclosed Power Cable: 3 Ft. with Plug**** 11=Flexible Liquidtight Conduit Enclosed 3 Ft. Power Cable† 12=On/Off Power Switch 19=Lamp Out Indicator (Not available on brightness level option 1 signs (Fixed, 5.5a)) 20=Additional Tether (Single module sign only) Fixture Type: FAA Size: 1=Taxiway Sign, 30˝ High 2=Taxiway Sign, 36˝ High 3=Taxiway Sign, 42˝ High 4=Distance Marker, 60˝ High** 5=Distance Marker, 42˝ High *4 Module size 2 exceeds specifications by 0.6 inches. **Size 4 Distance Marker provides 2 lamp modules— transformer to be sized accordingly. ***Use 33101, 33102 or 33103 isolation transformers only. Resistive load only. Use step 2 of a 3-step regulator. ****Not FAA compliant. †Not recognized by FAA. Number of Faces: 1=Single Face 2=Double Face Brightness Levels: 1=FAA Class 1 & 2, Style 5 (Fixed, 5.5A)*** 3=FAA Class 1 & 2, Style 2 (3 Steps, 4.8 to 6.6A) 5=FAA Class 1 & 2, Style 3 (5 Steps, 2.8 to 6.6A) Number of Lamp Modules: 1 to 4 Accessories Description Part Number Shipping Weight lb. kg. Shipping Volume cu.ft. cu.m. Base L-867, Class I, 24 inches deep Base L-867, Class II (PLASTIC), 24 inches deep Baseplate, 2 inch Hub Consolidating Harness Coverplate, 0.375 inches thick Gasket for Coverplate Isolation Transformer 100 watts, 6.6/6.6A Isolation Transformer 200 watts, 6.6/6.6A Isolation Transformer 300 watts, 6.6/6.6A Primary L-823 Connector Kit Secondary Cable Assembly, 2 meters 52.0 16.0 8.0 23.6 7.3 3.6 2.6 2.6 0.14 0.074 0.074 0.004 5.0 2.3 0.13 0.004 12.0 16.0 23.0 5.4 7.3 10.4 0.4 0.4 0.6 0.011 0.011 0.017 AC21242HX00301* 900152* AP1932* 26811-27 AK100006 10530287 TA100660-10 TA200655-10 TA300665-10 823KP-D4-D4 CAS1M-PR-B-2** *If the power leg is baseplate mounted directly on a base, only the AC21242HX00301 may be used with no gasket for the baseplate AP1932 to insure equal breakaway with the other legs. The base must be installed per the instruction manual, approximately 3/8 inch high with the lower edge of the base top flange level with the concrete. If the sign power leg is elbow mounted, base 900152 has conduit entries in the required positions. **Other lengths available. The sign includes cable clamp 25003 and two 40762 retainers. Renewal Parts Description Blank Panel Circuit Board: 3-step, 5-step Floor Flange Frangible Coupling: Size 1 Frangible Coupling: Size 2 Frangible Coupling: Size 3 Frangible Coupling: Size 4 Frangible Coupling: Size 5 Internal Transformer Lamp 62 watts, 6.6A Part Number 60668* 61153-1** 25684-1 62245-1 62245-2 62245-3 62245-4 62245-3 61143 20590 Description Part Number Lamp Cover Cap 60638 Lamp Cover Cap Gasket 60639 Lamp Socket 61107 Lead Assembly CAS1M-P-B-86 Light Tube Assembly 60685-X*** Sign Face, Retroreflective with Legend 60667* Sign Upgrade Kit, Transformer, Circuit Card, Hardware61163 Tether60728-1 *Dash number required for size and number of modules (contact factory). Add description of color and legend. **Only compatible with 61143 internal transformer. ***Insert dash number 1 or 2 or 3 for sign size 1 or 2 or 3 accordingly. EATON 5 Precision Approach Path Indicator - L880 and L881 A – – Fixture Type: 880=4 Units 881=2 Units Options: 11=ICAO (No tilt switch, light unit legs included, -55°C operation) (see above example) 12=When day operation enabled, night operator on/off interlocked with R/W circuit.* 13=Day & Night operation on/off interlocked with R/W circuit.* 16=Protective lens cover 21=Grounded Transformers­– For No Tilt Switch units only Model: Lamps: 2=2 Lamps per Unit 3=3 Lamps per Unit Style: A=208V to 240V B=6.6A *Style A only Note:Order one clinometer (aiming device) 25220 separately. Temperature Class: 1=–35°C 2=–55°C Accessories Shipping Weight Shipping Volume Item Description Part Number lb. kg. cu.ft. cu.m. Base L-867, class I, 24˝ deep Clinometer/Tilt Level Baseplate, 2˝ Hub 21242Q200301 25220 AP1932 52 23.6 2.6 0.074 8 3.6 0.14 0.004 Renewal Parts Description Part Number PAPI UNIT Breakable Coupling (1 per Unit) Breakable Coupling (3 per Unit) Connector Kit L-823, 8 AWG, .32˝ to .43˝ O.D. Consolidating Harness Style A Consolidating Harness Style B - FAA (2-Lamp) Consolidating Harness Style B - FAA (3-Lamp) Consolidating Harness Style B - ICAO Floor Flange (3 per Unit) Isolation Transformer 100W (Style B 3 lamp master) Isolation Transformer 200W (Style B Slave) Isolation Transformer 300W (Style B 2 & 3 lamp master) PCU Floor Flange (2 per PCU) Frangible Coupling (4 per PCU) Fuse F1 Fuse F2 Lightning Arrestor Photocell Assembly Power & Control Unit (PCU) PC Board Standard with no Options SPARE PAPI UNITS: (Without Harness & Mounting Hardware)* Style A, Class 1 Style A, Class 2 Style A, Option 11 Style B, Class 1 (Master) 6 *For complete 2-Lamp units, order 27170. *For complete 3-Lamp units, order 27175. EATON 60683-9 61062-1 823KP-D4-D4 10037-534 27068-1 27068-3 27068-2 25684-1 TA100660-10 TA200665-10 Description Part Number Lamp 200W (replaces 20531) Lamp Socket Plug 4-Pin with 4-Conductor wire 9.5´ Red Filter Tilt Switch (Class 1) Tilt Switch (Class 2, Style A) Tilt Switch (Class 2, Style B) Tilt Switch Control Board (2-Lamp) Tilt Switch Control Board (3-Lamp) Tilt Switch Control Board (3-Lamp) Transformer T1 10047-2896 40749 10037-533 27069 25225-1 25225-4 25225-3 27123-1 27123-2 27123-3 31329 Power & Control Unit (PCU) PC Board with Options “12” Relay K1,K2 Transformer T1, 1800VA Transformer T1, 2800VA Transformer T1, 900VA 27138-3 10047-2901 27038 27120 27039 Style B, Class 1 (Slave) Style B, Class 2 (Master) Style B, Class 2 (Slave) Style B, Option 11 2-Lamp 27178-5 27178-4 27178-6 27178-8 TA300665-10 25684-1 61062-1 10047-1005 10047-1143 10047-885 27045 27138-1 2-Lamp 27178-1 27178-2 27178-7 27178-3 3-Lamp 27179-1 27179-2 27179-7 27179-3 3-Lamp 27179-5 27179-4 27179-6 27179-8 Wind Cone - L806 and L807 – – – – Windcone Type: L - 806 L - 807 FAA Size: S1 = Size 1 - 8’ Feet Long S2 = Size 2 - 12’ Feet Long (L-807 Only) FAA Style: UN = Unlighted EX = External IN = Internal Power Source : NON = None 120 = 120 VAC 12 = 12 VDC 66A = 6.6 Amp Lamp Type: N = None/Halogen 5 = LED Application Notes • L806-S1-IN-120-ON-5, L806-S1-IN-120-ON-N, L806-S1-IN-66A-ON-5, L807-S1-IN-120-ON-5, L807 -S1-IN-120-ON-N and L807-S1-IN-66A-ON-5 these FAA styles cannot be certfified • L806-S1-IN-66A-ON-5, L807-S1-IN-66A-ON-5, L807-S2-IN-66A-ON-5 requires a 200W transformer, sold separately • L806-S1-EX-66A-ON-5, L807-S2-EX-66A-ON-5 requires a 300W transfomer, sold separately WC products are manufactured by HALI-BRITE INC. Crosby, MN Renewal Parts Description Part Number Wind Sock Size 1, 18” Diameter, 8’ Long, Orange Wind Sock Size 2, 36” Diameter, 12’ Long, Orange Frangible Coupling Lamp, 120V Incandescent Obsctruction Light 7400-0000-1 7400-0002 1800-0025 3400-116TS120 EATON 7 United States of America: Eaton’s Crouse-Hinds Airport Lighting Products Brazil: Cooper Crouse Hinds China: Cooper China Middle East (Dubai): Cooper Crouse Hinds LLC Engenharia de Aplicação No.955 Shengli Road Suite 302, Building 49 1200 Kennedy Road Sorocaba/SP - Brasil East Area Zone of Healthcare City Windsor, CT 06095, USA Tel: +55 15 3353 7071 Zhangjiang High-Tech Park Dubai, United Arab Emirates Tel: +1-860-683-4300 Fax: +55 15 9755 6016 Pudong, Shanghai China 201201 Tel: +971-4-427-2500 Fax: +1-860-683-4354 www.crouse-hinds.com.br Tel: +86 21 2899 3600 Fax: +971-4-429-8521 www.crouse-hinds.com/airportlighting Canada: Cooper Crouse Hinds For more information: If further assistance is required, please contact an authorized Eaton Distributor, Sales Office, or Customer Service Department. Fax: +86 21 2899 4055 Singapore: Cooper Crouse Hinds 5925 McLaughlin Road Mexico/Latin America: Cooper Crouse-Hinds Mississauga, On J. Rojo Gomez 2 Serangoon North Avenue 5 L5R 1B8 1170, Col. Guadalupe del Moral #06-01 Fu Yu Building Tel: +1-905-501-3086 09300, Iztapalapa, Mexico D.F. Singapore, Singapore 554911 Cell: +1- 647-229-1914 Tel: +52-555-804-4009 Tel: 65-6645-9888 Fax: +1- 905-501-3169 Tel: +52-555-804-4000 Fax: 65-6297-4819 Fax: + 1-800-761-5748 Fax: +52-555-804-4019 Eaton 1000 Eaton Boulevard Cleveland, OH 44122 United States Eaton.com © 2013 Eaton Corporation All Rights Reserved Printed in USA Publication No. 5094-1213 December 2013 Eaton’s Crouse-Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT 06095 USA TEL: +1 (860) 683-4300 USA FAX: +1 (860) 683-4354 www.crouse-hinds.com/airportlighting Singapore Regional Office Eaton is a registered trademark. All other trademarks are property of their respective owners.