Lampholders
Leviton offers a complete selection of outlet box,
incandescent, fluorescent and specialty lampholders,
in various ratings and materials. The following pages
offer a variety of types and styles.
Overview_________________________L1
FLUORESCENT LAMPHOLDERS
INCANDESCENT LAMPHOLDERS
Medium Bi-Pin _______________L12–L14
High Output _________________L12, L13
Slimline _____________________L12, L13
Miniature________________________L13
4-Pin Long Twin Tube
with 2G11 Base___________________L15
Compact Fluorescent Lampholders
(CFL’s)______________________L16–L19
Outlet Box, Keyless & Pull Chain __L2, L3
Metal Shell & Interiors ______________L4
Phenolic Cap & Shell _______________L4
Multi-Lampholder Clusters __________L5
Porcelain Par Connectors ___________L5
Bayonet Socket-Single Contact ______L5
Porcelain Mogul Base ______________L6
Socket Extensions_________________L7
Appliance Heating Receptacle _______L7
Porcelain & Phenolic _______________L7
Porcelain Snap-In__________________L8
Porcelain Keyless—
Commercial Units _________________L8
Porcelain Keyless Fixture
Single Circuit-Medium Base _________L8
Porcelain Keyless Medium Base-Side
Angle Mounted____________________L9
Phenolic Keyless Fixture—
Medium Base _____________________L9
Lampholders for Recessed Single
Contact Lamps____________________L9
Candle Sockets _______________L9–L11
S E C T I O N
L
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Residential Grade
Lampholders
A Variety of Incandescent and Fluorescent Styles in a Variety of Ratings and Materials
Outlet Box Lampholder
This one-piece pull
chain incandescent
lampholder, top wired,
utilizes twist-lock
mounting for convenient incandescent
installation.
Medium based, this
incandescent electrolier
lampholder is available
in a variety of attractive
finishes.
Available in two- or
three-lights, it has a
treated aluminum
screw shell.
Cat. No. 8827-CW4
Cat. No. 9346-PG
Cat. No. 4034-F5A
Porcelain Mogul Base
Lampholder
Candle Sockets
Lampholder for High
Output Lamps
These lampholders
come with leads, are
keyless and single
circuit.
Stylishly designed,
they are available in
phenolic, fiber disc
and porcelain bodies.
Possessing silver plated
contacts, these fluorescent lampholders are of
the recessed, double
contact, double
pedestal type.
Cat. No. 8806
Cat. No. 4155
Cat. No. 464
Medium & Miniature Bi-Pin
L1
Multi-Lampholder Cluster
Metal Shell
Compact Fluorescent
Lampholder
These fluorescent
lampholders, surface
mounted, are offered
with leads.
Developed for G23
and G23-2 lamp
bases, they snap-in
horizontally or screwdown vertically.
Cat. No. 395-W
Cat. No. 26719-100
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Outlet Box Lampholders
One-Piece Keyless Top Wired 660 WATT 600V
DESCRIPTION/
TERMINALS
2 Terminal Screws
6" Pigtail Leads
4 Terminal Screws
WHITE
UREA
8829-CW1
8829-CW2
8829-CW4
O.D.
FITS BOX SIZE
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
One-Piece Pull Chain Top Wired 660 WATT 250V
DESCRIPTION/
TERMINALS
2 Terminal Screws
6" Pigtail Leads
2 Terminal Screws
with Captive Clamps
WHITE
UREA
8827-CW1
8827-CW2
8827-CW4
O.D.
FITS BOX SIZE
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
8829-CW4
One-Piece Keyless Top Wired 660 WATT 250V
DESCRIPTION/
TERMINALS
2 Screws★
2 Screws, no cage lip
6" Pigtail Leads
4 Screws
4 Quickwire Push-In★
PORCELAIN
O.D.
FITS BOX SIZE
9874
9875
9875-2
49875
9883
33⁄ 4"
41⁄ 2"
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
One-Piece Pull Chain Top Wired 660 WATT 250V
DESCRIPTION/
TERMINALS
2 Screws
6" Pigtail Leads
2 Screws w/Captive Clamps
for 4-Wire Terminals
Interior Mechanism for
2-Piece Outlet Box Lampholders★
PORCELAIN
O.D.
FITS BOX SIZE
29816-C
29816-C2
49816-C
41⁄ 2"
41⁄ 2"
41⁄ 2"
31⁄ 4" or 4"
31⁄ 4" or 4"
31⁄ 4" or 4"
29816-C
SPECIFICATIONS & FEATURES
• Twist-lock mounting
• Pull chain models have bell at end of chain
on 3 foot cord
• Medium base
29816-CM*
TESTING & CODE COMPLIANCE
*When existing stock is depleted, this item will be DISCONTINUED.
All devices are UL Listed. Also CSA Certified except where indicated by★
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
4.50 (114.3 mm)
4.56 (115.9 mm)
2.01 (50.9 mm)
0.31
(7.9 mm)
1.33
((33.9 mm))
1.63
(41.3 mm)
1.52
(38.5 mm)
BLACK
Cat. No. 8827-CW4
Cat No. 9875-2
2.01 (50.9 mm)
1.74 (44.2 mm)
4.50 (114.3 mm)
Cat. No. 29816-C
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Outlet Box Lampholders
660 WATT 125V Lampholder Outlet 15 AMP-125V
One-Piece Pull Chain Side Wired
DESCRIPTION/
TERMINALS
2 Screws★
PORCELAIN
O.D.
FITS BOX SIZE
9716-C
41⁄ 2"
31⁄ 4" or 4"
NEMA CONFIG.
1-15R
W
660 WATT 125V Lampholder Outlet 15 AMP-125V
One-Piece Pull Chain Top Wired
9716-C
DESCRIPTION/
TERMINALS
2 Screws
PORCELAIN
O.D.
FITS BOX SIZE
9726-C
41⁄ 2"
31⁄ 4" or 4"
NEMA CONFIG.
G
5-15R
W
Ball and Chain Accessories
DESCRIPTION
No. 6 Chain; 1⁄ 8" Dia. Balls
BRASS FINISH
18302-1
NICKEL FINISH
18302-1N
Connector for No. 6 Chain
Chain, 3 feet long, End Bell and
Connector; use as extension or
replacement; 1⁄ 25" Dia. Balls
9820
6
9820-N
6-N
DESCRIPTION
Insulating Link; Thermoplastic
13⁄ 4" Total Length
BROWN
9839
WHITE
9839-I
9726-C
SPECIFICATIONS & FEATURES
• 2-Pole, 2-Wire Outlet; 2-Pole, 3-Wire Outlet
• Twist-lock mounting
• Pull chain models have bell at end of chain
on 3 foot cord
All devices are UL Listed. Also CSA Certified except where indicated by★
TESTING & CODE COMPLIANCE
• UL Listed (File #E-3810; E-7516)
• CSA Certified (File #LR-1863)
4.56 (115.9 mm)
Cat. No. 9716-C
L3
4.56 (115.9 mm)
Cat. No. 9726-C
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Metal Shell Lampholders
Medium Base*
DESCRIPTION
Key—Electrolier; Single Circuit; 1⁄ 8 IPS Tapped
Bushing w/Set Screw
Removable Turn Knob—Electrolier; Single Circuit;
1⁄ 8 IPS Tapped Bushing w/Set Screw
Removable Turn Knob—Electrolier; 2-Circuit;
3 Terminal; 1⁄ 8 IPS Tapped Bushing less Set Screw
Removable Turn Knob—Electrolier; 2-Circuit;
1⁄ 8 IPS Tapped Bushing
Pull Chain—Electrolier; Single Circuit;
1⁄ 8 IPS Tapped Bushing w/Set Screws
Push Through—Electrolier; Single Circuit;
1⁄ 8 IPS Tapped Bushing w/Set Screw
Keyless—Electrolier; Single Circuit;
1⁄ 8 IPS Tapped Bushing w/Set Screw
Keyless—Short Electrolier; Single Circuit;
1⁄ 8 IPS Tapped Bushing w/Set Screw
CAT. NO.
9346
RATING
250W 250V
10083-16
250W 250V
7070
250W 250V
7090
250W 250V
19980
660W 250V
7080
660W 250V
8004
660W 250V
9347
660W 250V
9346
Metal Shell Lampholders
Interiors — Medium Base, Phenolic Body, Aluminum Screw Shell
CAT. NO. INTERIOR
19980-M
10083-M†
7070-M†
7090-M†
9346-M†
7080-M†
8004-M†
10083-16
SPECIFICATIONS & FEATURES
• Phenolic interior with aluminum screwshell
• 2-Circuit lampholders operate dual-filament
lamps in sequence of Low-Medium-High-Off
• Cat. No. 7070 (2-Circuit, 3-Terminal) is wired
in series with keyless lampholder
Brown Phenolic Cap and Shell Lampholders
Two-Piece, Medium Base Electrolier Interiors
TESTING & CODE COMPLIANCE
CAT. NO.
97092
RATING
250W 250V
INTERIORS
7092-2M†
95110
660W 250V
7080-M†
95080
660W 250V
8004-M†
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
*COLOR
A suffix must be added to each basic catalog number to
indicate the finish desired. For Polished Gilt/Brass finish, add -PG; for Unfinished Aluminum, add -AL; for
Polished Aluminum, add -NI (finishes on aluminum). For
bright dip/Brass, add -BR (finish on brass). CONSULT
LEVITON REPRESENTATIVE FOR AVAILABILITY OF
FINISHES.
1.36
(34.5 mm)
Cat No. 7080
1.36
(34.5 mm)
Cat. No. 7090
1.06 (27.0 mm)
0.78 (19.8 mm)
1.94 (49.3 mm)
1.53
(38.9 mm)
2.69 (68.2 mm)
2.38 (60.3 mm)
0.81 (20.6 mm)
1.38
(34.9 mm)
0.28 (7.1 mm)
1.06 (27.0 mm)
0.28 (7.1 mm)
1.38
2.38 (60.3 mm)
2.38 (60.3 mm)
1.38
(34.9 mm)
0.28 (7.1 mm)
component.
All devices are UL Listed and CSA Certified.
1.06 (27.0 mm)
†UL Recognized
0.75 (19.1 mm)
1.20
(30.5 mm)
DESCRIPTION
Pull Cord (nylon); 2-Circuit,
1⁄ 8 IPS Threaded Cap w/Set Screw
Push-Through; 1⁄ 8 IPS Threaded
Cap w/Set Screw
Keyless; 1⁄ 8 IPS Threaded
Cap w/Set Screw
2.41 (61.1 mm)
LAMPHOLDER
19980
10083-16
7070
7090
9346
6098
8004
1.36
(34.5 mm)
Cat. No. 10083-16
Cat. No. 95110
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L4
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Medium Base Multi-Lampholder Clusters
Treated Aluminum Screw Shell
DESCRIPTION
2-Light Twin 1⁄ 8 IPS
Male Top Bracket Only
2-Light Twin 1⁄ 8 IPS
Male (top & bottom)
2-Light Offset 1⁄ 8 IPS
Male (top & bottom)
3-Light 1⁄ 8 IPS Male
(top & bottom)
2-Light Offset 1⁄ 8 IPS
Male (top); Pullchain
Switch (bottom) with
1⁄ 2" usable shank★
4034-F5A
2-Light Twin 1⁄ 8 IPS
Male (top); Pullchain
Switch (bottom)
3⁄ 8" usable shank★
CAT. NO.
4020-A3A
RATING
T
660W 250V 15⁄ 16
5⁄ 16
TA
B
—
BA
—
OAH T+B
—
4015-D4F
660W 250V 111⁄ 16
5⁄ 16
111⁄ 16
7⁄ 16
33⁄ 8
4032-E5F
660W 250V 13⁄4
5⁄ 16
13⁄ 4
7⁄ 16
311⁄ 16
341-D4U
660W 250V 13⁄4
1⁄ 2
13⁄4
7⁄ 16
31⁄ 2
4034-F5A
660W 250V 13⁄4
1A 125V T
5⁄ 16
115⁄ 16
1⁄ 2
33⁄4+
4017-D2F
660W 250V 11⁄ 16
1A 125V T
5⁄ 16
111⁄ 16
3⁄ 8
213⁄ 16+
+Includes nut.
Leads are No. 18 AWG 105°C plastic; 9" long, stripped 3⁄4"; untinned and pulled through top bracket.
Porcelain Par Connectors
DESCRIPTION
Medium Base for PAR #46 and #38 lamps. Leads
are No. 14 AWG 200°C SEW-2 Silicone Rubber Insulated;
18" Long, Stripped 3⁄4". Others available on inquiry
Mogul Base for PAR #56 and #64 lamps. Leads are
No. 14 150°C SEWF-2; 18" Long, Stripped 3⁄4".
Others available upon request
341-D4U
SPECIFICATIONS & FEATURES
• Pull chain models have bell at end of chain
on 3 foot cord
• Medium and Candelabra bases
• Par connectors have white, unglazed
porcelain body
TESTING & CODE COMPLIANCE
• UL Listed (File #E-13405)
CAT. NO.
368-1
RATING
660W 125V
357-8
1000W 125V
CAT. NO.
905
RATING
Low Voltage
Bayonet Socket — Single Contact
Candelabra Base
DESCRIPTION
Flat Bracket. Leads are No. 18 AWG, 105°C Plastic;
6" Long, Stripped 3⁄4" (one black, one white)★
All devices are UL Listed except Cat. No. 905. Also CSA Certified except where indicated by★
• CSA Certified (File #LR-5863)
T
1.69 (42.8 mm)
B
1.81 (46.0 mm)
TA
BA
0.31 (7.9 mm)
0.38 (9.5 mm)
B
T
1.75 (44.5 mm)
1.75 (44.5 mm)
BA
TA
0.44 (11.1 mm)
0.31 (7.9 mm)
BLACK
BLACK
WHITE
WHITE
Cat No. 4017-D2F
T
1.75 (44.5 mm)
B
Cat. No. 4032-E5F
1.94 (49.2 mm)
TA
BA
0.31 (7.9 mm)
0.50 (12.7 mm)
BLACK
WHITE
Cat. No. 4034-F5A
L5
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Porcelain Mogul Base Lampholders
With Leads*
DESCRIPTION
CAT. NO.
RATING
OUTSIDE
DIAMETER
21⁄8
OVERALL
HEIGHT
31⁄64
Keyless, Single Circuit. For high pressure
sodium lamps up to 1000 watts.
8-32 Mounting Screws on 13⁄8" Centers
Keyless, Single Circuit. Positon-oriented.
For Super Metalarc HID lamps.
8-32 Mounting Screws on 13⁄8" Centers
Keyless, Single Circuit. For high-pressure
sodium lamps up to 400 watts.
8-32 Mounting Screws on 13⁄8" Centers
Low Pressure Sodium. For use with all
single-end bayonet base low pressure
sodium lamps★
8746
1500W 600V
5KV Pulse-rated
8750
1500W 600V
25⁄32
239⁄ 64
8756
1500W 600V
25⁄32
4KV Pulse-rated
239⁄ 64
8806
660W 1000V
8756
13⁄8
15⁄8
*Leads types, lengths and ratings vary with the end use applications. Standard leads as well as variations
available on inquiry.
Screw Terminals
DESCRIPTION
CAT. NO.
RATING
Keyless; 2-Piece; Single-Pole★
Keyless;. Single Circuit with 8-32
Lock Nuts on 13⁄ 8" Centers.
Die-cast caps available upon request
8765
8694
1500W 600V
1500W 600V
OUTSIDE
DIAMETER
21⁄4
25⁄ 32
OVERALL
HEIGHT
223⁄ 64
211⁄ 16
All devices are UL Listed. Also CSA Certified except where indicated by★
8806
SPECIFICATIONS & FEATURES
• Cat. No. 8746 – Porcelain body gray glazed
with ceramic arc shield; Cat. No. 8750 –
Porcelain body yellow glazed
• All other moguls listed have white glazed
porcelain body
• Copper-alloy nickel-plated screw shell
TESTING & CODE COMPLIANCE
• UL Listed (File #E-13402)
• CSA Certified (File #LR-1863)
(2) 8-32 MOUNTING SCREWS
0.31 (7.9 mm)
0.31 (7.9 mm)
0.95 (24.2 mm)
2.61 (66.3 mm)
TO DEPRESSED CENTER CONTACT
Cat No. 8694
Ø 2.16 (54.8 mm)
1.38
(34.9 mm)
Ø 2.16 (54.8 mm)
1.38
(34.9 mm)
(2) 8-32 MOUNTING SCREWS
0.95 (24.2 mm)
2.61 (66.3 mm)
TO DEPRESSED CENTER CONTACT
Cat. No. 8756
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L6
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Socket Extensions — Single Circuit
Medium–Medium
DESCRIPTION
2-Piece Porcelain; Mounting Hole 13⁄ 8" Dia.
Extension 11⁄4"*
1-Piece Porcelain; Slotted Mounting Hole 13⁄ 8" Dia.
Extension 11⁄4"*
1-Piece Phenolic. Extension 13⁄ 16"**
CAT. NO.
2004
RATING
660W 250V
2005
660W 250V
2006
660W 250V
CAT. NO.
8647
RATING
1500W 600V
CAT. NO.
8681
8681-400
RATING
660W 250V
660W 250V
4 KV Pulse-Rated
CAT. NO.
8110
RATING
660W 250V
*To be used with porcelain sockets only
**To be used with phenolic sockets only
2004
Mogul-Mogul
DESCRIPTION
1-Piece Porcelain. Extension 23⁄ 8"
Socket Adapter
Mogul-To-Porcelain Medium
DESCRIPTION
1-piece. Meets Fed. Spec. W-L-142a
Same as above, except 4 KV Pulse-Rated
Appliance Heating Receptacle
Porcelain Two-Piece
9063
SPECIFICATIONS & FEATURES
• Medium-to-Medium Extenders available in
phenolic and porcelain
• Pony Cleat Receptacles have open wiring
terminals
• Two-piece surface-type lampholders have
concealed wiring terminals with wireways for
top and continuous wiring
TESTING & CODE COMPLIANCE
• UL Listed (File #E-3810; E-13396)
• CSA Certified (File #LR-1863)
DESCRIPTION
2-piece Heating Receptacle. Gasket Furnished
Porcelain and Phenolic Lampholders
Pony Cleat Type
DESCRIPTION
Candelabra Base; Plastic.
Not UL Listed★
Miniature Base, Plastic.
Not UL Listed★
Medium Base, Phenolic
Medium Base, Porcelain
CAT. NO.
10028
RATING
75W 125V
OD
17⁄ 16
OH
C
7⁄ 8
11⁄ 8
10020
9063
19062
75W 125V
660W 250V
660W 250V
15⁄ 16
17⁄ 8
17⁄ 8
7⁄ 8
31⁄ 32
11⁄ 2
11⁄ 2
115⁄ 16
115⁄ 16
CAT. NO.
9880
RATING
660W 250V
OD
2 5⁄16
OH
11⁄ 2
C
13⁄ 8
9882
660W 250V
25⁄16
17⁄ 8
13⁄ 8
Surface Type
DESCRIPTION
Medium Base; Porcelain;
Low 2-Piece
Medium Base; Porcelain;
High 2-Piece★
All devices are UL Listed. Also CSA Certified except where indicated by★
2.31 (58.7 mm)
1.31 (33.3 mm)
Ø 1.63 (41.3 mm)
0.38 (9.6 mm)
0.77 (19.4 mm)
1.00 (25.4 mm)
0.86 (21.9 mm)
2.19 (55.5 mm)
Cat No. 2005
L7
0.59
(15.1 mm)
0.59
(15.1 mm)
Cat. No. 10020
2.19 (55.6 mm)
1.53 (38.9 mm)
Cat. No. 9880
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Porcelain Snap-In Lampholders — Medium Base
Screw Terminals
DESCRIPTION
1-Piece, Front Mounted. 1⁄4" Shoulder.
Panel Thickness: .025 –.062"
1-Piece, Front Mounted. Shallow Back.
Panel Thickness: .030 –.062"
CAT. NO.
8880
RATING
660W 250V
OD
111⁄ 16
OH
11⁄ 2
8875
660W 250V
111⁄ 16
111⁄ 16
Porcelain Keyless Lampholders Commercial Units —
Medium Base
Single Circuit Screw Terminals
DESCRIPTION
Straight Body with Cap. Screw Terminals.
Beaded Body for 11⁄ 2" Clamp Style
Shadeholder with Cap.
Screw Terminals.
Adjustable Glass Retaining Ring with
Cap and Ring Nut. Screw Terminals.
Straight Body with Leads. No. 18 AWG
105°C Plastic; 9" Long, Stripped 3⁄4"
with Two 6/32 Mounting Screws
8880
CAT. NO.
10045
10065
RATING
660W 250V
660W 250V
OD
11⁄ 2
Body 11⁄ 2
OH
21⁄ 8
21⁄ 8
20070
660W 250V
Bead 15⁄ 8
21⁄4 ringnut —
10085
660W 250V
11⁄ 2
111⁄ 16
Porcelain Keyless Fixture Single Circuit — Medium Base
Screw Terminals
DESCRIPTION
1-Piece, Front Mounted for Fixture or
Sign Use. Tapped 8-32 Bushings,
Mounting Centers 113 ⁄ 16".
2-Piece, Ring Type
1-Piece with Removable Strap★
Fixture Pan Lampholder with
1⁄ 8" IPS Hickey
CAT. NO.
9885
RATING
660W 600V
OD
15⁄ 8
OH
17⁄ 16
9350
8871
3152-8
660W 250V
660W 250V
660W 250V
13⁄ 4
111⁄ 16
13⁄ 8
13⁄ 8
19⁄ 16
17⁄ 16
SPECIFICATIONS & FEATURES
CAT. NO.
8101
RATING
660W 250V
OD
13⁄ 4
OH
13⁄ 8
TESTING & CODE COMPLIANCE
18315
660W 250V
—
—
8052-1
660W 250V
13⁄ 8
17⁄ 16
CAT. NO.
9814
RATING
250W 250V
OD
113⁄ 16
OH
113⁄ 16
Leads
DESCRIPTION
2-Piece Ring Type with Leads: No. 18 AWG,
105°C Plastic; 9" Long, Stripped 3⁄4"
Angle Pan with Leads: No. 18 AWG Type AF
150°C Plastic; 9" Long, Stripped 3⁄4"
Removable Bracket with Leads
8101
• Suitable for a wide variety of fixtures, signs
and displays
• Unglazed base and ring on two-piece
lampholders
• Gasket supplied with two-piece ring type
rated at 90°C dry maximum
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
Two-Piece Pull Chain
DESCRIPTION
Ring Type; Screw Terminals;
Gasket Furnished★
All devices are UL Listed. Also CSA Certified except where indicated by★
Ø 1.75 (44.4 mm)
BLACK
1.36 (34.5 mm)
2.03 (51.6 mm)
1.69 (42.9 mm)
WHITE
1.47 (37.3 mm)
1.64 (41.6 mm)
Cat No. 8880
Cat. No. 8101
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L8
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Phenolic Keyless Fixture — Medium Base
Screw Terminals
DESCRIPTION
Permanent Bracket. Terminal Screws
Backed Out and Staked
Same as 3352-1, with Shorter Bracket
Removable Hickey. Terminal Screws Backed
Out and Staked
CAT. NO.
3352-1
RATING
660W 250V
3352-F
3352-8
660W 250V
660W 250V
Hickeys and brackets are available in various types and sizes. Consult a Leviton representative for more information.
Porcelain Keyless, Side-Mounted — Medium Base
3352-1
Screw Terminals
DESCRIPTION
Single Lampholder w/Side Outlet Bushing—1⁄ 8 IPS
Twin Lampholder w/Bushed Flange—1⁄ 8 IPS
Twin Lampholder w/Single Outlet Bushing—1⁄ 8 IPS
Same as 4005 with 3⁄ 8 IPS Bushing
CAT. NO.
10091
4010
4005
4006
RATING
660W 250V
660W 250V
660W 250V
660W 250V
All bushings are tapped and have set screw
Lampholders for Recessed Single Contact Lamps
DESCRIPTION
Front Flange Mount. Standard Leads are No. 18 AWG,
Type SEW-2, 200°C, 18" Long, Stripped 3⁄ 4"
Rear Flange Mount. Same Leads and Specs as No. 554
554
CAT. NO.
554
RATING
3000W 600V
555
3000W 600V
Candle Sockets, Bottom Turn Knob — Medium Base
SPECIFICATIONS & FEATURES
• Cat. No. 3352 lampholder bodies have wireways
• Side-Mounted lampholders are white glazed
porcelain with copper-alloy screwshell
• Recessed Single-Contact lampholders
have porcelain body with nickel-plated
steel housing
Screw Terminals
DESCRIPTION
Three-light, two-piece phenolic husk.
Lighting sequence: LO-MED-HI-OFF★
CAT. NO.
4063
RATING
250W 250V
All devices are UL Listed. Also CSA Certified except where indicated by★
TESTING & CODE COMPLIANCE
• UL Listed (File #E-3810)
• CSA Certified (File #LR-1863)
Ø 0.16 (4.0 mm)
(2 HOLES)
1.44 (36.5 mm)
Cat No. 3352-1
L9
0.34 (8.7 mm)
0.82 (20.9 mm)
0.64
(16.3 mm)
0.94 (23.9 mm)
1.56 (39.7 mm)
0.97 (24.6 mm)
0.70
(17.8 mm)
1.22 (30.9 mm)
Ø 1.25 (31.7 mm)
2.22 (56.4 mm)
0.08 (2.0 mm)
Cat. No. 554
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Candle Sockets, Bottom Turn Knob — Medium Base
Screw Terminals
DESCRIPTION
1-Piece Phenolic Body; 2 Leg Bracket; Single Light;
Removable Interior; Knurl Nut and Lock Nut
2-Piece Phenolic Husk & Removable Interior Husk;
Single Light; Knurl Nut
CAT. NO.
4155
RATING
660W 250V
4158
660W 250V
Candle Sockets, Keyless*— Medium Base
Fiber-Disc Body, Screw Terminals
DESCRIPTION
Solid Hickey, 2" Overall Height
Adjustable Hickey. Overall Height: 4 – 5 3⁄4"
*Insulating paper liner pushes down against hickey projections.
CAT. NO.
8684
9800
RATING
660W 250V
660W 250
4155
NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of 13/16"
dia. flat bottom of candle cup for clearance.
Candle Sockets, Phenolic — Medium Base
With Removable Turn Knob, Screw Terminals
DESCRIPTION
Removable Knob (Short Type), Adjustable Hickey.
Overall Height: 4 – 51⁄ 2"
Removable Knob, Removable 1-Leg Hickey.
Overall Height: 27⁄ 16"
CAT. NO.
9805*
RATING
250W 250V
9805-A*
250W 250V
9805-A
NOTE: These items are designed for use with standard socket candle tubes (115/16" dia.) and require a minimum of 13/16"
dia. flat at bottom of candle for clearance.
Candelabra Base, Keyless*
SPECIFICATIONS & FEATURES
DESCRIPTION
Screw Terminals; Solid Hickey. Overall Height: 2"
Screw Terminals; Solid Hickey. Overall Height: 11⁄ 2"
Screw Terminals; Adjustable Hickey: 31⁄4 – 43⁄4"
Double Snap-In Spring Clips. Height of socket from
panel is 1". Leads are No. 18 AWG 105°C plastic,
24" long, stripped 1⁄ 2"
*7/8" candle tube. All hickeys tapped 1/8 IPS.
CAT. NO.
10025
10027
10026
10014-800
RATING
75W 125V
75W 125V
75W 125V
75W 125V
• Candle sockets for single-light applications
• Fiber Disc Body for use with standard candle
tubes
• Spring-tempered steel clip holds Cat. No.
10014-800 socket rigidly in place
TESTING & CODE COMPLIANCE
• UL Listed (File #E-3810; E-13400)
• CSA Certified (File #LR-1863)
All devices are UL Listed and CSA Certified.
1.16 (29.4 mm)
1.73 (44.0 mm)
1.27 (32.1 mm)
1.03
(26.2 mm)
0.46 (11.6 mm)
3.13 (79.5 mm)
Cat No. 4155
1.41 (35.7 mm)
Cat. No. 9805-A
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L10
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Incandescent Lampholders
Candle Sockets — Porcelain
Candelabra Base Screw Terminals
DESCRIPTION
Solid Hickey.* Overall Height: 23⁄ 32"★
CAT. NO.
20025
RATING
75W 125V
*Other hickey sizes available
Keyless Heavy Duty Phenolic Single Circuit Lampholders
Two-Piece Pin Type
20025
DESCRIPTION
Candelabra Base, Detachable Zinc-Plated Wire Hook.
Accepts No. 20 – No. 18 Stranded Insulated Wire
Medium Base, Detachable Zinc-Plated Wire Hook.
Accepts No. 14 – No. 12 Stranded Insulated Wire
CAT. NO.
267**
RATING
75W 125V
167**
660W 250V
CAT. NO.
55**
RATING
660W 250V
157**
660W 250V
157-X**
124-D
660W 250V
660W 250V
Note: Linings assembled.
**For temporary lighting — not waterproof.
Pigtail Type Medium Base with Leads
55
SPECIFICATIONS & FEATURES
• Candle socket has white unglazed porcelain
body with aluminum screw shell
• Choice of Pin-Type or Pigtail Type for
temporary lighting applications
• Two-Piece Pin Type automatically pierces
wire leads
DESCRIPTION
Vinyl, Phenolic Interior & Screw Shell, Brass Shell
Contact. Leads are No. 14 AWG, 6" Long, Stripped 3⁄4",
Molded into Boots
Phenolic with Brass Screw Shell. Leads Soldered
and Hot Waxed in Deep Well are No. 14 AWG 6" Long
Same as 157 above, with Left-Hand Screw Shell
Rubber, Aluminum Screwshell. Leads are
No. 16 AWG, 6" Long, Soldered to Terminals
and Sealed in Rubber Boot★
**For temporary lighting—not waterproof.
All devices are UL Listed except Cat.No. 124-D. Also CSA Certified except where indicated by★
Note: The listed products may be used at construction sites provided that bulb cages are used and suitable splices are
made. The listing for the products meets the OSHA requirement and is made for open wiring without a separate outlet box.
TESTING & CODE COMPLIANCE
• UL Listed (File #E-13400) 267**
• UL Listed (File #E-3810) 55**, 157**,
157-X** and 167**
• CSA Certified (File #LR-1863)
0.60 (15.2 mm)
Ø 1.64
(41.7 mm)
2.12 (54.0 mm)
1.84 (46.8 mm)
0.94
(23.9 mm)
1.44 (36.6 mm)
0.78
(19.8 mm)
WHITE
0.72 (18.3 mm)
Cat No. 20025
L11
Cat. No. 55
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Fluorescent Lampholders
For High Output Lamps — Recessed Double Contact, Pedestal Type
DESCRIPTION
Screw Mount, Straight-in wiring
Through Wireways or Screw Terminals*
Slide-on, Shallow Base,
Quickwire Terminals*
Slide-on, Shallow Base for Power Groove
and Jacketed Lamps, Quickwire Terminals*
CAT. NO.
PLUNGER
464
CAT. NO.
FIXED
465
RATING
660W 600V
13550
13551
660W 600V
13556
13557
660W 600V
CAT. NO.
PLUNGER
452
—
466
—
2536
—
CAT. NO.
FIXED
—
453
—
467
—
2537
RATING
CAT. NO.
WHITE
431-W
RATING
660W 600V
390-1W
660W 600V
391-1W
660W 600V
CAT. NO.
380
396
RATING
660W 250V
660W 250V
For Slimline, Single Pin Lamps
DESCRIPTION
Butt-On Surface Mounting,
12" Leads
Pedestal Base, Slide-On
Shallow Base, Slide-On or Lock-On
Mounting, Quickwire Terminals*
464
660W 1000V
660W 600V
660W 1000V
660W 600V
660W 1000V
660W 600V
For Medium Bi-Pin Lamps
DESCRIPTION
Thin Body, Quickwire Terminals
Accommodate Rapid-Start Circuits
Pedestal type, Straight-in Wiring
Through Wireways or Screw Terminals
Same as above, with Starter Base
2536
Starter Bases
For Medium Bi-Pin Lamps
DESCRIPTION
Starter Base; Screw Terminals, Black
Starter Base; with Leads, Black
SPECIFICATIONS & FEATURES
All devices are UL Listed andCSA Certified.
*Suitable for outdoor applications when properly enclosed
1.13 (28.6 mm)
TESTING & CODE COMPLIANCE
1.13 (28.6 mm)
• UL Listed (File #E-5833)
• CSA Certified (File #LR-1863; LR-5863;
LR-2200)
• NOM Certified (#057)
1.77 (44.8 mm)
1.17 (29.8 mm)
Ø 0.84
(21.3mm)
0.75 (19.0 mm)
2.33 (59.1 mm)
• Silver-plated copper alloy contacts
• Quickwire terminals accept No. 18 AWG
twisted and tinned, solder-dipped or
solid leads
• Lampholders are white, starter bases
are black
1.66 (42.1 mm)
1.45 (36.9 mm)
Cat No. 464
1.25 (31.8 mm)
0.97 (24.6 mm)
Ø 0.13 (3.18 mm)
(2 HOLES)
0.27 (6.9 mm)
1.06 (27.0 mm)
0.47
(11.9 mm) 0.21 (5.3 mm)
0.09 (2.3mm)
Cat. No. 396
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L12
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Fluorescent Lampholders
For Medium & Miniature Bi-Pin Lamps — Surface Mount with Leads*
DESCRIPTION
Rapid-Start Medium Bi-Pin, 9" leads
Rapid-Start Medium Bi-Pin, Disconnect
(paired with Cat. No. 395-W), 9" leads
Miniature Bi-Pin for T5 Lamp, 6" leads
CAT. NO.
WHITE
395-W
389-W
RATING
660W 600V
660W 600V
420-W
75W 250V
*Leads are No. 18 AWG, 105°C plastic insulated wire
For Slimline, Medium Bi-Pin, High Output Lamps —
Snap-In with Quickwire
395-W
DESCRIPTION
Slimline
Medium Bi-Pin
Medium Bi-Pin, Stainless Steel
Coverplate & Clip
Medium Bi-Pin, Same as above,
with Internal Shunt for Use with
Electronic Ballasts
High Output 800mA and 1500mA
CAT. NO.
PLUNGER
516
—
518†
—
13518
—
23518
—
CAT. NO.
FIXED
—
517
—
519†
—
13519
—
23519
RATING
660W 1000V
660W 600V
660W 600V
660W 600V
660W 600V
660W 600V
660W 600V
660W 600V
523
—
—
524
660W 600V
660W 600V
†When existing stock is depleted this item will be DISCONTINUED.
All devices are UL Listed and CSA Certified.
13518
0.64 (16.3 mm)
0.55 (14.0 mm)
Ø1.6
4 (41
SPECIFICATIONS & FEATURES
• Versatile snap-in mounting reduces fixture
assembly time
• Quickwire terminals accept either No. 18
AWG (stranded, twisted or tinned), No. 18
AWG solid or No. 16 AWG solid.
• Internal Shunt versions stamped “S” on back
for easy identification
.7 m
m)
TESTING & CODE COMPLIANCE
• UL Listed (File #E-5833)
47.75 (1212.9 mm) FOR 48" LAMPS
• CSA Certified (File #LR-5863; LR-1863)
• NOM Certified (#057)
Cat. No. 13518
Plunger style
Cat. No. 13519
Stationary style
KEY for
13518/13519
45°
R 0.813 (20.64 mm)
(4 0.1
.7 8
6 8
m
m
)
Cat No. 13500 Spacing
)
.50
38
(
.52
1
PANEL OPENING for 13518/13519
Panel Thickness 0.035-0.050 (0.89-1.27 mm)
L13
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Fluorescent Lampholders
For Medium Bi-Pin Lamps — Turn-Type
DESCRIPTION
Low Profile, Slide-On, with Captive Nut
Tall Profile, Slide-On, with Captive Nut
Tall Profile without Side Grooves,
Slide-On, with Captive Nut
Low Profile Disconnect, Slide-On
Tall Profile Disconnect, Slide-On
Low-Profile; Shunted, Slide-On
CAT. NO.
13353-N
13357-N
13359-N
RATING
660W 600V
660W 600V
660W 600V
13351-D
13354-D
23351
660W 600V
660W 600V
660W 600V
CAT. NO.
13150-UR5
13451-N
RATING
660W 600V
660W 600V
For Medium Bi-Pin Lamps — Straight-In
DESCRIPTION
Low Profile, Slide-On
Self-Locking; Slide-In, with Captive Nut.
For use with T-8 Lamps
13653-WP
For Medium Bi-Pin Lamps — Snap-In/Slide-On Design and Lamp-Lock
DESCRIPTION
Snap-In or Slide-On Mounting Featuring Lamp-Lock,
with Panel Locator Post. For T-8 and T-12 Lamps
Same as Above, Less Locator Post
Same as 13653-WP, Except with Internal Shunt
Connection for Electronic Ballasts
Same as Above, Less Locator Post
Snap-In or Slide-On Mounting Featuring Lamp-Lock,
Optional Panel Locator Post. Dedicated for
Energy-Efficient T-8 Lamps Only
Same as 13652, Except with Internal Shunt
Connection for Electronic Ballasts
CAT. NO.
13653-WP
RATING
660W 600V
13653-NP
23653-WP
660W 600V
660W 600V
23653-NP
13652-WP
660W 600V
660W 600V
23652-WP
660W 600V
13357-N
SPECIFICATIONS & FEATURES
All devices are UL Listed and CSA Certified.
1.17 (29.7 mm)
0.88 (22.4 mm)
0.38 (9.5 mm)
0.72 (18.2 mm)
0.19 (4.7 mm)
L-DISC-B
0.055 – 0.052 (1.39 – 1.32 mm)
(FOR #18 GA. PANEL)
1.02 (25.8 mm)
0.043 – 0.040 (1.09 – 1.02 mm)
(FOR #20 GA. PANEL)
1.00 (25.4 mm)
1.68 (42.6 mm)
0.34 (8.6 mm)
Lamp-Lock
• Four-position lamp-lock socket rotates 90°,
forward and back, for quick relamping
• Lamp-Lock models have slim, low profile
silhouette that fits 22 to 25 gauge panels
• Chemical-resistant white thermoplastic body
TESTING & CODE COMPLIANCE
• UL Listed (File #E-5833)
SUGGESTED OPENING IN
SOCKET PLATE.
THIS IS ONLY A RECOMMENDATION
AS SOCKET WILL FUNCTION
OVER A WIDER RANGE.
• CSA Certified (File #LR-1863; LR-5863;
LR-2200)
• NOM Certified (#057)
1.00 (25.4 mm)
1.25 (31.8 mm)
Cat No. 13351-D
0.98 (24.9 mm)
0.34 (8.6 mm)
Ø0.177 (4
0.15 (3.8 mm)
0.375
0.311
(9.53 mm) (7.90 mm)
Recommended
Panel Thickness
0.021-0.031
(0.53-0.79 mm)
1.004 (25.50 mm)
0.22
(5.6 mm)
RAISED
POST
OPTIONAL
1.35 (34.2 mm)
.50 mm)
0.88 (22.4 mm)
0.33
(8.4 mm)
Cat No. 23653-WP
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L14
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Twin Tube with 2G11 Base
4-Pin Long Twin-Tube with 2G11 Base — Slide-In Mounting
DESCRIPTION
CAT. NO.
RATING
Slide-In for 18-20 Ga. Panels, Quickwire Terminals
13452
660W 600V
Plastic Lamp Support clip, Slide-On
23452-A
—
Plastic Lamp Support clip, Screw Mount
23452-B
—
4-Pin Long Twin-Tube with 2G11 Base — Bottom or Back Mounting
13453
DESCRIPTION
CAT. NO.
RATING
Vertical Snap-In Mounting, Side Push-In Wiring
13453
660W 600V
Same as above, with Internal Shunt
Connection for Electronic Ballasts
23453
660W 600V
Horizontal Snap-In Mounting, Bottom Push-In Wiring
13454
660W 600V
Same as above, with Internal Shunt
Connection for Electronic Ballasts
23454
660W 600V
Horizontal Screw-Mount. Bottom Push-In Wiring
13455
660W 600V
Same as above, with Internal Shunt
Connection for Electronic Ballasts
23455
660W 600V
Horizontal Snap-In Lamp Support Clip.
UV-Stable, Clear Polycarbonate
23452-H
—
Vertical Snap-In Lamp Support Clip.
UV-Stable, Clear Polycarbonate
23452-V
—
All devices are UL Listed and CSA Certified.
13454
13453 and 23454
13453
SPECIFICATIONS & FEATURES
0.69
(17.5 mm)
0.69
(17.5 mm)
1.94 (49.3 mm)
1.00 (25.4 mm)
0.39
(9.9 mm)
0.39
(9.9 mm)
0.30
(7.6 mm)
0.52
(13.2 mm)
0.524
(13.31 mm)
0.52
(13.2 mm)
0.023-0.040
(0.58-1.02 mm)
1.32 (33.5 mm)
0.023-0.040
(0.58-1.02 mm)
0.15
(3.8 mm)
TESTING & CODE COMPLIANCE
• UL Listed (File #E-5833)
• CSA Certified (File #LR-1863)
• NOM Certified (File #057)
0.86 (21.8 mm)
0.86 (21.8 mm)
0.95 (24.1 mm)
• Vertical Snap-In model allows wires to be
routed on either top or bottom of panel
• Two wiring ports per contact speed
harness wiring
• Internal Shunt models eliminate need for
extra jumper wire in fixtures designed for
electronic ballasts
• Low-profile design for smaller, more
compact fixtures
• Superior metal-spring lamp retainer clips
23453
1.000 (25.4 mm)
SUGGESTED PANEL CUTOUT
PANEL-THICKNESS
.023-.039 (0.58–0.99 mm) MAX.
INCLUDING PAINT
Cat Nos. 13453 and 23454
L15
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Compact Fluorescent
Lampholders (CFL’s)
10mm Compact Fluorescent Lampholders
For G23 and G23-2 Lamp Bases
Rating: 75 WATT 600V
MOUNTING
CAT. NO.
COLOR
Horizontal Snap-In
26719-100
White
Horizontal
Screw-Down
Vertical Top Snap-In
4-Hole Vertical
Screw-Down
Vertical Bottom
Snap-In
26719-200
White
26719-300*
26719-400
White
White
26719-500
White
LAMP
BASE
G23,
G23-2
G23,
G23-2
G23
G23,
G23-2
G23,
G23-2
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
PL-S,
5W, 7W,
9W
DULUX S
5W, 7W, 9W
DULUX D
9W
BIAX,
5W, 7W,
9W
DOUBLE
BIAX
9W
26719-400
*Not compatible with 9-watt DTT lamps
For GX23 and GX23-2 Lamp Bases
Rating: 75 WATT 600V
MOUNTING
CAT. NO.
COLOR
LAMP
BASE
Horizontal Snap-In
26720-100
White
w/Black
White
w/Black
White
w/Black
White
w/Black
White
w/Black
GX23,
GX23-2
GX23,
GX23-2
GX23
Horizontal
26720-200
Screw-Down
Vertical Top Snap-In 26720-300*
4-Hole Vertical
26720-400
Screw-Down
Vertical Bottom
26720-500
Snap-In
For 18-20 Ga. Panels 26720-520
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
PL-S
13W
PL-C
13W
DULUX S
13W
DULUX D
13W
BIAX
13W
DOUBLE
BIAX
13W
GX23,
GX23-2
GX23,
GX23-2
26720-400
SPECIFICATIONS & FEATURES
• “Smart” CFL Lampholders are color-coded
for easy wattage identification
• Bottom snap-in versions for easier panel
assembly
• Snap-In versions designed for 16 Ga. panels,
except where noted
• Metal-spring lamp-retainer clip provides
positive lamp retention and is more durable
than plastic clips
• Two wiring ports per contact speed
harness wiring
• Four screw holes for greater mounting
flexibility
• Wire-routing options for top or bottom side of
mounting panel for easier assembly
• White thermoplastic body
*Not compatible with 13-watt DTT lamps
All devices are UL Listed and CSA Certified.
TESTING & CODE COMPLIANCE
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor applications
when properly enclosed
• CSA Certified (File #LR-1863)
1.09 (27.8 mm)
0.81 (20.6 mm)
1.20 (30.6 mm)
0.81 (20.6 mm)
1.00 (25.4 mm)
1.00 (25.4 mm)
1.00 (25.4 mm)
Ø 0.19
(4.75 mm)
0.22 (5.5 mm)
1.40 (35.6 mm)
1.20 (30.6 mm)
1.00 (25.4 mm)
1.40 (35.6 mm)
1.09 (27.8 mm)
0.81 (20.6 mm)
0.81 (20.6 mm)
NOTE:
RECOMMENDED MOUNTING
SELF-THREADING #8 SCREW
Cat No. 26720-400
RECOMMENDED PANEL OPENING
Ø 0.19
(4.75 mm)
0.22 (5.5 mm)
NOTE:
RECOMMENDED MOUNTING
SELF-THREADING #8 SCREW
RECOMMENDED PANEL OPENING
Cat. No. 26719-400
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L16
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Compact Fluorescent
Lampholders (CFL’s)
10mm Compact Fluorescent Lampholders
For G24d Lamp Bases 2-Pin — Rating: 75 WATT 600V
26725-202
MOUNTING
CAT. NO.
COLOR LAMP
BASE
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
Bottom Snap-In
For 18-20 Ga. Panels
Bottom Snap-In
For 18-20 Ga. Panels
Bottom Snap-In
For 18-20 Ga. Panels
4-Hole Bottom
Screw-Down
26725-201
26725-221
26725-202
26725-222
26725-203
26725-223
26725-211
White
w/Black
Green
G24d-1
Orange
G24d-3
White
w/Black
G24d-1
PL-C
10W, 13W
PL-C
18-W
PL-C
26W
PL-C
10W, 13W
DULUX D
10W, 13W
DULUX D
18W
DULUX D
26W
DULUX D
10W, 13W
DOUBLE
BIAX 10W, 13W
DOUBLE
BIAX 18W
DOUBLE
BIAX 26W
DOUBLE
BIAX
4-Hole Bottom
Screw-Down
4-Hole Bottom
Screw-Down
26725-212
Green
G24d-2
26725-213
Orange
G24d-3
PL-C
18W
PL-C
26W
DULUX D
18W
DULUX D 26W
DULUX T 26W
DOUBLE
BIAX 18W
DOUBLE
BIAX 26W
G24d-2
For G24q and GX24q Lamp Bases 4-Pin — Rating: 75 WATT 600V
Suitable for Dimming or Electronic Ballasts
PHILIPS
OSRAM
SYLVANIA
GE
LIGHTING
Bottom Snap-In
For 18-20 Ga. Panels
Bottom Snap-In
For 18-20 Ga. Panels
Bottom Snap-In
For 18-20 Ga. Panels
26725-401
26725-421
26725-402
26725-422
26725-403
26725-423
White
w/Black
Green
G24q-1
Orange
26725-404
26725-424
26725-429
White
G24q-3
GX24q-4
PL-T 26W,
32W, 42W
G24q-1
26725-412
White
w/Black
Green
PL-C
10W, 13W
PL-C 18W
26725-413
Orange
G24q-3,
GX24q-3
4-Hole Bottom
Screw-Down
4-Hole bottom
Screw-Down for
Universal ballast only
26725-414
Yellow
GX24q-4
PL-C 26W
PL-T
26W, 32W
PL-T 42W
26725-419
White
G24q-3
GX24q-4
PL-T 26W,
32W, 42W
DULUX D/E
10W, 13W
DULUX D/E
18W
DULUX D/E
DULUX T/E
26W
DULUX T/E
42W
DULUX T/E
26W, 32W,
42W
DULUX D/E
10W, 13W
DULUX D/E
18W
DULUX D/E
DULUX T/E
26W, 32W
DULUX T/E
42W
DULUX T/E
26W, 32W,
42W
DOUBLE
BIAX 10W, 13W
DOUBLE
BIAX 18W
DOUBLE
BIAX
Bottom Snap-In
For 18-20 Ga. Panels
Bottom Snap-In for
Universal ballast only,
18-20 Ga. Panels
4-Hole Bottom
Screw-Down
4-Hole Bottom
Screw-Down
4-Hole Bottom
Screw-Down
G24q-3,
GX24q-3
26W, 32W
GX24q-4
PL-C
10W, 13W
PL-C
18W
PL-C 26W
PL-T
26W, 32W
PL-T 42W
G24q-2
Yellow
26725-411
G24q-2
PERFORMANCE
BIAX 42W
TRIPLE BIAX
26W, 32W,
42W
DOUBLE
BIAX 10W, 13W
DOUBLE
BIAX 18W
DOUBLE
BIAX
26W
PERFORMANCE
BIAX 42W
TRIPLE BIAX
26W, 32W,
42W
Note: Lamp names are trademarked by manufacturers
1.36 (34.6 mm)
2.
7
m
m
)
0.68
(17.3 mm)
(3
1.063 (27.0 mm)
0.81
(20.6 mm)
• “Smart” CFL Lampholder are color-coded for
easy wattage identification
• Bottom snap-in versions for easier panel
assembly
• Snap-In versions designed for 16 Ga. panels,
except where noted
• All 4-pin lampholders have internal rejection
feature that prevents insertion of 2-pin lamps
• Metal-spring lamp-retainer clip provides
positive lamp retention and is more durable than
plastic clips
• Two wiring ports per contact speed
harness wiring
• Four screw holes for greater mounting flexibility
• Wire-routing options for top or bottom side of
mounting panel for easier assembly
• White thermoplastic body
COLOR LAMP
BASE
29
SPECIFICATIONS & FEATURES
CAT. NO.
1.
26725-401
MOUNTING
1.00 (25.4 mm)
TESTING & CODE COMPLIANCE
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor applications
when properly enclosed
• CSA Certified (File #LR-1863)
1.40 (35.6 mm)
RECOMMENDED MOUNTING
HOLE PATTERN
Cat No. 26725-213
0.812
(20.62 mm)
0.267
(6.78 mm)
)
8
28 m
1. 2 m
.7
2
(3
1.359
(34.52 mm)
1.400
(35.56 mm)
0.125
(3.18 mm)
0.062
(1.57 mm)
1.400
(35.56 mm)
0.560
(14.22 mm)
RECOMMENDED
PANEL OPENING
KEYWAY
0.360
(9.14 mm)
1.063
(27.00 mm)
0.680
(17.27 mm)
1.312
(33.32 mm)
FOR SCREW-MOUNT OPTION, RECOMMENDED
MOUNTING SCREW #8 SELF-CUTTING
RECOMMENDED PANEL
THICKNESS - 16 GA.
Cat. No. 26725-401
L17
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Compact Fluorescent
Lampholders (CFL’s)
10mm Compact Fluorescent Lampholders
for High-Wattage Lamps
For GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V
Suitable for Dimming or Electronic Ballasts
MOUNTING
CAT. NO.
COLOR
Bottom Snap-In
for 16 Ga. Panels
4-Hole Bottom
Screw-Down
2-Hole Bottom
Screw-Down,
Round Body
Bottom Snap-In
for 18–20 Ga. Panels
Bottom Snap-In
for 16 Ga. Panels
4-Hole Bottom
Screw-Down
2-Hole Bottom
Screw-Down,
Round Body
Bottom Snap-In
for 18–20 Ga. Panels
26725-405
Blue
LAMP
BASE
GX24q-5
26725-415
Blue
GX24q-5
26725-4A5
Blue
GX24q-5
OSRAM
SYLVANIA
DULUX T/E
57W
DULUX T/E
57W
DULUX T/E
57W
GE
LIGHTING
BIAX Q/E
57W
BIAX Q/E
57W
BIAX Q/E
57W
BIAX Q/E
57W
BIAX Q/E
70W
BIAX Q/E
70W
BIAX Q/E
70W
26725-425
Blue
GX24q-5
26725-406
Red
GX24q-6
DULUX T/E
57W
—
26725-416
Red
GX24q-6
—
26725-4A6
Red
GX24q-6
—
26725-426
Red
GX24q-6
—
26725-415
BIAX Q/E
70W
26725-416
1.40 (35.6 mm)
0.81
(20.6 mm)
1.40 (35.6 mm)
m
7
2.
0.68
(17.3 mm)
1.12 (28.6 mm)
)
1.36 (34.5 mm)
1.00 (25.4) mm
29
m
SPECIFICATIONS & FEATURES
(3
1.
KEYWAY
1.00 (25.4 mm)
RECOMMENDED MOUNTING SCREW
#8 SELF-CUTTING
RECOMMENDED HOLE PATTERN
Cat. No. 26725-415
57W Screw Mount
• “Smart” CFL Lampholders are color-coded
for easy wattage identification
• Bottom Snap-In versions for easier panel
assembly available for 16 Ga. and 18–20
Ga. panels
• All 4-pin lampholders have internal rejection
feature that prevents insertion of 2-pin lamps
• Metal-spring lamp-retainer clip provides
positive lamp retention
• Two wiring ports per contact speed harness
wiring
• Wire-routing options for top or bottom side of
mounting panel for easier assembly
• Bodies are white thermoplastic (with colorcoding as indicated)
• Quick-connect push-in wiring terminals
accept No. 18 AWG solid or twisted-and
–overtinned leads, stripped 3/8 inch
TESTING & CODE COMPLIANCE
1.40 (35.6 mm)
1.37 (34.8 mm)
0.27 (6.8 mm)
0.06
(1.6 mm)
1.40 (35.6 mm)
1.51 (38.4 mm)
1.40 (35.6 mm)
0.24 (6.2 mm)
KEYWAY
RECOMMENDED PANEL
THICKNESS — 18–20 GA.
0.036-0.047
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor applications
when properly enclosed
• CSA Certified (File #LR-1863)
• NOM Certified (#057)
0.36
(9.1 mm)
0.56 (14.2 mm)
RECOMMENDED PANEL OPENING
Cat. No. 26725-426
70W Snap-In
For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 ....Building a Connected World
L18
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Compact Fluorescent
Lampholders (CFL’s)
10mm Compact Fluorescent Lampholders with Round Bodies
For G24d Lamp Bases, 2-Pin — Rating: 75 WATT 600V
Bottom Screw-Down Mounting
26725-2A1
CAT. NO.
COLOR
26725-2A1
Black
LAMP
BASE
G24d-1
26725-2A2
Green
G24d-2
PL-C
10W, 13W
PL-C, 18W
26725-2A3
Orange
G24d-3
PL-C, 26W
CAT. NO.
COLOR
26725-4A1
Black
LAMP
BASE
G24q-1
26725-4A2
Green
Green
Orange
Orange
G24q-2
GX24q-2
G24q-3
GX24q-3
26725-4A4
Yellow
GX24q-4
26725-4A5
26725-4A6
26725-4A9
Universal*
Blue
Red
No color code
White body
only
GX24q-5
GX24q-6
G24q-3
GX24q-4
• “Smart” CFL Lampholders are color-coded for
easy wattage identification
• All 4-pin lampholders have internal rejection
feature that prevents insertion of 2-pin lamps
• Metal-spring lamp-retainer clip provides
positive lamp retention and is more durable
than plastic clips
• Two wiring ports per contact speed harness
wiring
• Wire-routing options for top or bottom side of
mounting panel for easier assembly
• Bodies are white thermoplastic (with colorcoding as indicated)
• Quick-connect push-in wiring terminals accept
No. 18 AWG solid or twisted-and–overtinned
leads, stripped 3/8 inch
GE
LIGHTING
DOUBLE BIAX
10W, 13W
DOUBLE BIAX 18W
DOUBLE BIAX 26W
PHILIPS
PL-C
10W, 13W
OSRAM
SYLVANIA
DULUX-D
10W, 13W
PL-C, 18W
PL-C, 18W
PL-C, 26W
PL-T
26W, 32W
PL-T, 42W
DULUX D, 18W
DULUX T/E, 18W
DULUX D, 26W
DULUX T/E
26W, 32W
DULUX T/E, 42W
—
—
PL-T
26W, 32W
42W
DULUX T/E, 57W
—
DULUX T/E
26W, 32W,
42W
GE
LIGHTING
DOUBLE BIAX
10W, 13W
TRIPLE BIAX 13W
DOUBLE BIAX, 18W
TRIPLE BIAX, 18W
DOUBLE BIAX, 26W
TRIPLE BIAX
26W, 32W
PERFORMANCE
BIAX 42W
BIAX Q/E, 57W
BIAX Q/E, 70W
TRIPLE BIAX
26W, 32W, 42W
*For use with universal ballast only
Note: Lamp names are trademarked by manufacturers
1.40 (35.6 mm)
1.21 (30.8 mm)
1.28 (32.6 mm)
0.94
(23.8 mm)
Ø 0.14 (3.5 mm)
0.20 (5.2 mm)
1.09
(27.6 mm)
Ø 0.25 (6.4 mm)
0.63
(15.9 mm)
SPECIFICATIONS & FEATURES
OSRAM
SYLVANIA
DULUX D
10W, 13W
DULUX D, 18W
DULUX T, 18W
DULUX D, 26W
DULUX T, 26W
For G24q and GX24q Lamp Bases, 4-Pin — Rating: 75 WATT 600V
Bottom Screw-Down Mounting — Suitable for Dimming or
Electronic Ballasts
26725-4A3
26725-4A4
PHILIPS
0.94 (23.8 mm)
1.1
3(
28
KEYWAY
.6
TESTING & CODE COMPLIANCE
• UL Listed (File #E-5833)
• UL Listed for indoor and outdoor applications
when properly enclosed
• CSA Certified (File #LR-1863)
• NOM Certified (#057)
Cat No. 26725-2A1
.25
Ø0
0.1
4(
0.63 (15.9 mm)
1.40 (35.6 mm)
3.5
1.21 (30.8 mm)
m)
4m
(6.
Ø
mm
)
8
33
Ø
1.
3.
(3
m
m
)
0.20
(5.2 mm)
mm
)
0.63
(15.9 mm)
°
34
1.09
(27.6 mm)
Recommended Panel Opening for
Cat No. 26725-2A1 and Cat No. 26725-4A5
KEYWAY
0.94
(23.8 mm)
1.40 (35.6 mm)
Cat No. 26725-4A5
L19
To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com ....Building a Connected World
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com