SIDE VIEW
TOP VIEW
10. RE-INSTALL ACCESS PANELS.
9. WIRE AS NECESSARY, AND ADJUST LIMIT SWITCH LEVER ARM IF NECESSARY.
NOTE: LEVER ARM REQUIRES 10° TRAVEL TO TRIP LIMIT SWITCH
8. MAKE SURE ALL SETSCREWS AND OTHER FASTENERS ARE TIGHT.
7. USING THE KEY SUPPLIED WITH THE GEAR BOX, INSTALL THE GEARBOX ON THE
SHAFT AND MOUNT. BOLT MOTOR TO GEARBOX.
6. INSTALL MOTOR MOUNT TO SIDE OF DROP.
NOTE: 2 MOUNTS ARE SUPPLIED, ONE FOR EACH SIDE OF THE DROP.
5. ATTACH THE LEVER ARM TO THE LIMIT SWITCH ON THE INSIDE OF THE DROP.
LEVER ARM SHOULD BE POSITIONED BETWEEN THE 2 STOPS ON THE GATE.
4. INSTALL THE BODY OF THE LIMIT SWITCH ON THE OUTSIDE OF THE DROP.
NOTE: HEAD OF LIMIT SWITCH MAY NEED TO BE CLOCKED 180° TO BE INSTALLED.
3. DRILL/PUNCH OUT THE NOTCHED KNOCK-OUTS ON THE SIDE OF THE DROP.
GEARBOX
MOTOR
LIMIT SWITCH
BOLT STOVE 3/16" X 1 1/2" G5
LEVER ARM
MOTOR MOUNT (SIDE SPECIFIC)
WASHER FLAT 5/16" PLATED
BOLT HHCS 5/16" X 1" G5 PLATED
BOLT HHCS 3/8" X 1" G5 PLT
5/16" NYLOCK NUT
3/16" LOCK WASHER
3/16" NON-LOCK NUT
3/8" LOCK WASHER
DESCRIPTION
QTY
1
1
1
2
1
1 EA.
3
3
2
3
2
2
2
ECO/
PRN
REF.
DESCRIPTION OF CHANGE
MOTOR MOUNT
INSTALL TO DROP USING:
33046 (3) - 5/16" X 1" BOLT
33023 (3) - 5/16" FLAT WASHER
33135 (3) - 5/16" NYLOCK NUT
LIMIT SWITCH
INSTALL TO DROP USING:
1017092 (2) - 3/16" X 1-1/2" STOVE BOLT
33142 (2) - 3/16" LOCK WASHER
33149 (2) - 3/16" NON-LOCK NUT
INSTALL VENT PLUG SUPPLIED
WITH GEARBOX.
BY
DATE
TOLERANCES
Industries, Inc.
P.O. BOX 629 CLAY CENTER, KANSAS 67432
GLOBAL
Hutchinson/Mayrath
FRACTION = +/- 1/16
DEGREE = +/- 1 DEG.
DECIMAL (0.0) = +/- .030
(0.00) = +/- .015
(0.000) = +/- .005
(UNLESS OTHERWISE NOTED)
A Division of
ASSEMBLY VIEW
DRAWN BY:
DESIGNED BY:
MATERIAL:
DXF FILE:
FINISH COLOR:
---
SCALE:
ACCESS PANELS
LEVER ARM
INSTALL ONTO
LIMIT SWITCH
SECTION A-A
6/2/2010
DATE:
6/2/2010
DATE:
1039040
DRAWING NO.
1
INSTRUCTIONS FOR INSTALLING GRAIN
PUMP DROP ELECTRIC CONVERSION KIT
PART NAME
1
1
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION BELONGING TO HUTCHINSON/MAYRATH, A DIVISION OF GLOBAL INDUSTRIES, INC. AND
SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS, COPIED, REPRODUCED, OR USED WITHOUT WRITTEN AUTHORITY FROM HUTCHINSON/MAYRATH.
PART NUMBER
BUNDLE SPECIFIC
BUNDLE SPECIFIC
1017007
1017092
1017199
1038994/1038995
33023
33046
33060
33135
33142
33149
D1150
KEY SUPPLIED WITH 1033295
GEARBOX
MOUNT WITH:
33060 (2) - 3/8" X 1" BOLT
D1150 (2) - 3/8" LOCK WASHER
MOTOR
BOLT TO GEARBOX USING
BOLTS AND KEY STOCK
SUPPLIED WITH GEARBOX
NOTE:
LEVER ARM REQUIRES 10° ROTATION
TO TRIP THE LIMIT SWITCH. AFTER
INSTALLED, CHECK TO MAKE SURE LIMIT
SWITCH TRIPS, AND MAKE NECESSARY
ADJUSTMENTS.
1
2. SLIDE THE SHAFT ALL THE WAY TO ONE SIDE OF THE DROP. THE PINION GEAR WILL
NEED TO BE RE-POSITIONED.
MOTOR/GEARBOX, AND LIMIT SWITCH
CAN BE MOUNTED ON EITHER SIDE OF
DROP. INCLUDED IS A MOTOR MOUNT
FOR BOTH SIDES OF THE DROP.
A
1039040
INSTRUCTIONS:
1. REMOVE THE PULLEY FROM THE DROP. TEMPORARILY REMOVE ACCESS PANELS.
A
DRAWING NO.